Report 10052 makes the intranetstylesheet prefs behave like the opac ones.
This patch contains an optional db revision: If the pref intranetstylesheet is
not blank, and does not start with http, https or /, then prefix it with a
slash to make it an absolute path.
Test plan:
Before applying this patch:
1) Put intranet-tmpl/prog/en/css/staff-global.css into intranetstylesheet.
This works in the current staff client, but will be interpreted as relative as
soon as both patches for this report have been applied.
Apply the patch. And run: /cgi-bin/koha/installer/install.pl?step=3&op=updatestructure
Check the webinstaller warning and the pref value. There should be a slash
in front now. The css should still work.
Continue after applying this patch with:
2) Clear the intranetstylesheet pref. Run updatestructure again. No message: OK
3) Put /intranet-tmpl/prog/en/css/staff-global.css in intranetstylesheet.
Run updatestructure again. No message: OK
4) Prefix intranetstylesheet with http://[your-server-here]. Test again.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Database revision for report 9722, adding new pref OpacShowHoldNotes.
This development is part of a larger one (see umbrella report 9721).
Test plan:
Run [your server]/cgi-bin/koha/installer/install.pl?step=3&op=updatestructure
Optionally, run a new install to test sysprefs.sql.
Or:
Edit sysprefs.sql, leave at least the last few lines including the new one.
And run from command line: mysql -p [yourdatabase] < [your-clone]/installer/data/mysql/sysprefs.sql
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Remove the column 'itemnumber' from the table 'serial'. This is
a 1 to many relationship, and this reference does not make sense.
The 'serialitems' table handles the relationship between the 'items'
table and the 'serial' table.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify serial.itemnumber has been removed from the database
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Column removed. No errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
Some table columns should have an index to speed SQL queries :
- statistics table has only one index (used to make heavy queries for reports)
- itemtype should have an index in items and biblioitems (this is used in circulation to check the number of existing issues of a specific item type)
- issue.branchcode and issue.issuingbranch
Test plan :
- Create a new database using kohastructure.pl
=> check there is no SQL error and that new indexes are present (mysql> show create table)
Apply update database on a master version
=> check there is no SQL error and that new indexes are present (mysql> show create table)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Indexes created as described. No errors.
Fixing small merge conflict.
Test presence of new indexes on all affected tables.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL only changes fixing an important database update.
IMPORTANT: Patches must be backported to all versions containing
the database update 3.09.00.025.
I used the test plan provided by Julian with some additions:
1/ Do a fresh 3.8 install
2/ Do some reserves
3/ Check your old_reserves table is empty
4/ Update your sources to 3.10
5/ Run updatedatabase.pl
6/ Your reserves table is now empty!
I made sure I had item level and title level holds, also
suspended holds.
I repeated the test with entries in my old_reserves table
(cancelled and filled holds) to make sure this is also still
working correctly.
Before the patch we lost all suspended holds and when the
old_reserves table was empty also all holds in general.
After the patch the reserve_id is added but the other data
in both tables is not altered.
NOTE: Adding the reserve_id first to old_reserves and then
to reserves we are missing one id in between.
old_reserves: 1,2,3
reserves: 5,6
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
It can remove all reserves from reserves table when there is no entries
in old_reserves.
This is due to @ai which is set to NULL in
SET @ai = ( SELECT MAX( reserve_id ) FROM tmp_reserves )
and reserve_id > NULL returns no results in
INSERT INTO reserves SELECT * FROM tmp_reserves WHERE reserve_id > @ai
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan and comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Increase both on staff and OPAC interface
from 80 to 255 characters to be saved in
the database. Shown will be 80 characters.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Clean patch, workes as described.
To test:
- Apply patch and run database update
- Check that the column in the database is now varchar(255)
- Enter a new suggestion in the OPAC
- Edit this suggestion in staff
- Confirm form has the new max value set
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This followup adds Catalan language into languages
other than english.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Simply add catalan language.
No translation yet, so can't be really tested.
But it will come soon.
Until then, to test:
1) cp misc/translator/po/es-ES* to ca-ES*
2) do perl translate install ca-ES,
3) apply the patch
4) run updatedatabase.pl
5) enable language and display on system preferences.
6) check labels
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to current master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Small followup to update servers. No errors
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch
- Updates the sample servers installed by the web installer
- Does a database upgrade that changes the encoding for the servers
in question
To test:
- Do a Norwegian installation and make sure to choose the optional
sample Z39.50 targets
- Check that encodings for the Norwegian targets (BIBSYS, SAMBOK,
NORBOK and DEICHMAN) are all set to ISO_6937 (which is the wrong
encoding)
- Apply this patch and make sure updatadatabase.pl is run
- Check that the encoding for the four targets mentioned above are
now ISO_8859-1
- Do one search against each target and check that there are no
"strange" chars in the result list. Searching each of the targets
for "hessen" should give results that include "norwegian vowels"
- Log on to the MySQL of the test installation and empty the table
of Z39.50 targets:
mysql> delete from z3950servers;
- Load this file into MySQL from the command line:
installer/data/mysql/nb-NO/2-Valgfritt/z3950servers.sql
and check that it loads without errors and that the four
Norwegian targets are still set to have encoding = ISO_8859-1
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
No koha-qa errors
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
(this is best done by someone who has a database with translated
strings for user permissions - I'm looking towards Katrin. :))
Get a 3.6-3.8 era database loaded as test data - also please use
a low value test database.
Translate or change the strings in the database for the user
permissions that follow in mysql client (for those who didn't
install with a different language that has translated files
at install time) -
update userflags set flagdesc="Translated text 1" where flag
IN('catalogue','editauthorities','reports','management','serials',
'updatecharges','circulate','parameters','borrowers','tools',
'staffaccess','edit_patrons');
(you will notice that this changes all of the permission labels
in the interface to "translated text 1" for the affected
permission flags. This is why I don't want you to use a high
value test database.)
Update that to master + this patch - your "translations"
should be intact.
Blow that database away, and make a brand new one 3.6-3.8 era
with the english database definitions. Run the update again with
this patch, the strings should be updated correctly.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
There was a typo in the patch, the first database update had to be
changed from this: $dbh->do{(q{ to this: $dbh->do(q{
* Test 1:
- git checkout v3.06.05
- Run through the web installer in Norwegian, installing all
Norwegian sample data
- git checkout <master + patch for bug 9745>
- Run web installer/upgrade
- Almost all of the permissions are still in Norwegian. The ones
that are in English are not touched by the database update for
3.11.00.016, so they must have been introduced by other updates.
* Test 2:
- git checkout v3.06.05
- Run through the web installer in English, installing all English
sample data
- git checkout <master + patch for bug 9745>
- Run web installer/upgrade
- All permissions have been updated as expected, except "Perform
batch modification of patrons" which is not in the 'userflags'
table, but in the 'permissions' table. I have amended the patch
to account for this.
Two fixes to the original patch, please give a shout if this
makes a second signoff necessary!
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I tested this on an English and a German sample base updating
from 3.06.07 successfully.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Corrected incorrect field names in the last query (it's
permissions.description not permissions.flagdesc).
This reverts commit 60508cb03d, reversing
changes made to 8579d07f14.
The patches for bug 7688 caused a failure in t/db_dependent/Serials.t:
not ok 8 - test getting history from sub-scription
Conflicts:
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
kohaversion.pl
DB changements:
- Adds 2 fields: subscription.reneweddate and aqorders.subscriptionid.
- Removes 2 unused fields: aqorders.serialid and aqorders.subscription.
Main test plan:
1) Create a subscription
2) Create a bookseller and a basket
3) Add a new order 'from a subscription'
4) Search your subscription and check if results are correct
5) Click on the "order" link
6) Check the biblio information are filled in the form
7) Select a budget and fill some price information.
8) retry steps 3 and 4. Verify you cannot order the same subscription.
Message:Outstanding order (only one order per subscription is allowed).
9) click on your subscription (already added) and check you have a new
table "Acquisition details" with your price information in the "Ordered
amount" line.
10) receive this order
11) On your subscription detail page, the "Spent amount" line must be
filled with your price information.
12) Re order the same subscription. Now you are allowed to. Prices
information have to be filled with the previous information.
13) Retry some orders and click on a maximum of links in order to find a
bug :)
Signed-off-by: Leila Arkab <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Simple changes, all ok.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This feature enables a particular library's items to be emphasized and moved
to the first position on the search results and details pages of the OPAC.
It is enabled by the sytem preference HighlightOwnItemsOnOPAC.
To choose which branches items are emphasized, use the system preference
HighlightOwnItemsOnOPACWhich. It has two modes.
If set to PatronBranch, the items emphasized will be those of the same
library as the patron's library. If no one is logged into the opac, no
items will be highlighted.
If set to OpacURLBranch, the library is chosen based on the Apache
environment variable BRANCHCODE.
For example, this could be added to the OPAC section of koha-httpd.conf:
SetEnv BRANCHCODE "CPL"
The point of this feature is to allow each library on a given Koha server
to have a specific subdomain for the opac where that library's items are
empasized. That was http://branch1.opac.mylibrary.org will emphasize the
items of branch1, while http://branch2.opac.mylibrary.org will emphasize
the items of branch2.
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
firstacquidate is now a mandatory field, so it must be set.
The updatedatabase process set firstacquidate value to one of:
- the planned date of the first serial for this subscription, or if not
found,
- the subscription start date.
+ auto-select the numbering pattern when modifying a subscription.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Serials numbering pattern and frequencies are no more hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This implies new sql tables (subscription_numberpatterns
and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
english and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern. You can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' infos
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds the ability to add groups to the library select
pulldown on the opac, if it is enabled.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Go to Administration › Libraries and groups
4) Create a new group, or edit an existing one
5) Ensure the 'Show in search pulldown' checkbox is checked
6) Save the group
7) Enable OpacAddMastheadLibraryPulldown if it is not already enabled
8) Load the OPAC, try the group search from the libraries pulldown menu
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Yes! Now this works, and well.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Renew an issue for a number of days (filled in the issuing rules).
Test if rules work for any i[item]types and if there is no regression.
- new column issuingrules.renewalperiod
- remove all occurrences of an already removed syspref (globalDueDate)
- remove an unused routine (Overdues::GetIssuingRules)
How it works:
- On existing installations, the issuingrules.renewalperiod =
issuingrules.loanlength. So the behaviour is the same before and after
this patch.
- when you add a rule, you can choose a renewal period (the unit value
is the issuingrules.unit). So you can have a renewal period in hours
or days.
- The default value for the renewal period is 21 days (same as
loanlength)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Didn't break on well-formed notices, and fixed those with problems
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The primary advantage to the Firefox offline cirulation plugin when compared
to the offline circulation desktop application, is the ability to add offline
circulation actions to a queue so that multiple machines running offline
circ can have their circ actions combined and ordered chronologically before
being executed. This commit adds the ability to put actions from uploaded
KOC files into this queue. In this way, both the FF plugina and the desktop
application can be run side by side with no ill effects.
Signed-off-by: Bob Birchall <bob@calyx.net.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Implements the material type icons shown in the MARC21 XSLT result list
of the OPAC for the intrant result list.
Also adds the system preference DisplayIconsXSLT as an intranet analogue
for the OPAC system preference DisplayOPACiconsXSLT and corrects the
descriptions of both preferences in the syspref editor.
To test:
0) Run database update to add new system preference
1) Activate default XSLTResultsDisplay
2) Check the new system preference DisplayIconsXSLT shows up correctly
and is activated by default. Compare descriptions between DisplayIconsXSLT
and DisplayOPACiconsXSLT.
3) Check the intranet result list for icons showing up after 'Type:' and
before the corresponding description. Detail pages should be showing
the 'Type:' as before.
4) Turn off DisplayIconsXSLT.
5) Check the line containing 'Type:', format and audience information is now
hidden from the result list.
6) Check that the 'Type:'line is also hidden from the detail page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
