This patch adds responsiveness to several DataTables which were not
updated in 32341. The patch removes the CSS-based responsive styling
which was previously used for these tables.
This patch also adds some additional configuration to the tables on the
user home page so that the title column is always prioritized when
DataTables collapses columns in narrow views.
To test, apply the patch and rebuild the OPAC CSS. Ideally this should
be tested with a user who has checkouts, overdues, holds, tags, and a
checkout history.
- Log in to the OPAC and test the user summary page. Check that each
table adjusts well to narrow browser widths. In each case the column
containing the title should never be hidden no matter how narrow the
window:
- Checkouts
- Relatives' checkouts (requires that the user is a guarantor for a
patron with checkouts and that the guarantee's account is set up to
show checkouts to the guarantor).
- Overdues
- Holds
- Article requests
The new places the responsive DataTables extension is being used:
- Checkout history
- Suggestions
- Tags (in the table of user-submitted tags)
- Most popular
Again, in each case the table should be responsive and the title column
should be prioritized so that it doesn't get hidden at narrow page
widths.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some translations in the ERM module
Translations should be wrapped in this.$__()
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Issue that this patch fixes:
1) Enable ILLmodule and install FreeForm, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Copy the example YAML text into the system preference input box
3) Create a new FreeForm request and enter a duff borrowernumber e.g. '11111111111111'
4) Click 'Create'. Submit the type disclaimer stage.
5) Notice there's an error
6) Apply this patch.
7) Repeat steps 3 and 4. Verify that the correct 'The borrower details you entered are invalid' error message is displayed instead of the error in 5).
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
- Enable ILLCheckAvailability;
- Enable ILLModule and install FreeForm
- Update partner_code in koha-conf.xml to match the patron category being used ('IL' if on k-t-d)
- Install and configure z39.50 availability plugin, link it to the patron ID ('16' if on k-t-d)
- Add a valid e-mail address to the patron of 'IL' category
- Create a new ILL request and go to 'Manage request' screen
- Click 'Place request with partners' notice the label 'Partners available for searching: none'
- Apply patch and refresh, notice a 'Search selected partners' button now shows up after you select the partner from the list
This is a fix for a regression caused by the rest of the code in this bug. I'm submitting this here since this has not yet been pushed and the fix is quite self-explanatory
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Move ILLModuleCopyrightClearance, ILLCheckAvailability, and ILLModuleDisclaimerByType sys prefs
State that ILLModuleCopyrightClearance is OPAC only in its description
Correct 'bold' reference in ILLModuleDisclaimerByType description
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
For both staff interface and OPAC:
* Update breadcrumbs to have a new entry for the page
* Rename button From Next to submit
* Add a cancel link to back out
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds some documentation for the different options presented in
the example YAML entry and improves formatting a little for better
readability of the example.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Update the way Availability is handled
Add the new type disclaimer workflow operation
after Availability
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Update the way Availability is handled
Add the new type disclaimer workflow operation
after Availability
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
New Illrequest::Workflow superclass
New Illrequest::Workflow::TypeDisclaimer
Moved Illrequest::Availability to Illrequest::Workflow::Availability
Removed check for backend capability "should_display_availability"
Instead, the check is now done for "can_create_request" backend
capability
This serves the purpose of having the backend let core know
if it can create the request or not. In other words, if the
create form has been submitted or not.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the mention of checkout history from the
ExportCircHistory system preference description, as this system
preference only allows to export current checkouts, not checkout
history.
This patch also modifies the description of the ExportRemoveFields
system preference to also remove mention of checkout history.
To test:
0. Apply patch
1. Go to Administration > System preferences > Circulation
2. Read the description for ExportCircHistory, make sure it makes sense,
and that spelling and syntax are correct
3. Read the description for ExportRemoveFields, make sure it makes
sense, and that spelling and syntax are correct
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the EnableItemGroups system preference with cataloging
preferences, as it deals with the grouping of items in a bibliographic record.
To test:
1. Apply patch
2. Go to Administration > System preferences
3. Search for enableitemgroup
--> EnableItemGroups should be in cataloging preferences
--> EnableItemGroupHolds should be in circulation preferences
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch confirms that a session ID has been set before trying to save search history to a logged in user on the OPAC.
This depends on EnableOpacSearchHistory system preference being enabled.
Apply the patch and test that you don't see an Error 500 page at any point through this plan:
1. Do an OPAC search, ensure you are not logged in
2. Confirm your search was saved to search history
3. Do another search, then log in
4. Confirm you are brought back to the search results after logging in
5. Confirm all search history from the session is visible
Sponsored-by: Toi Ohomai Institute of Technology
Signed-off-by: Salah Ghedda <salah.ghedda@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Since the first submission of this patch we have introduced a system
preference to enable/disable edifact in it's entirety. This patch adds
the check for this preference.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Find or create an item invoiced via an EDI INVOICE message
2) Ensure you have the edi_manage subpermission
3) View catalogue/detail.pl, not the invoice link in the invoice column
4) Apply this patch
5) Restart all the things!
6) Reload catalogue/detail.pl
7) Note the new "(EDI invoice)" link in the column for the item
8) Verify the link does not show if you do not have the edi_manage
subpermission
Signed-off-by: Jeremy Evans <Jeremy.Evans@ukhsa.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes an incorrect URL escaping on search filter
facet URLs.
Without this patch, search filters using non-ASCII characters won't
return results.
To test:
0. Apply patch
1. Enable SavedSearchFilters syspref
2. Search for "the"
3. Save as search filter (to show on both OPAC and staff interface)
4. Search for "ü" in staff interface
5. Apply the "the" filter
6. Note that search results appear
7. Search for "ü" in OPAC
8. Apply the "the" filter
9. Note that search results appear
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch appends or prepends an asterisk on Code39 barcodes if
they are missing from the input. This is so that they form correct
Code39 barcode images.
Test plan:
0. Apply the patch
1. koha-plack --reload kohadev
2. Go to http://localhost:8081/cgi-bin/koha/labels/barcode-print.pl
3. Type 39999000001310 into "Barcode" and click "Show barcode"
4. Note that the barcode text on the right includes asterisks around it
5. Type *39999000001310 into "Barcode" and click "Show barcode"
6. Note the same as above
7. Type 39999000001310* into "Barcode" and click "Show barcode"
8. Note the same as above
9. Type *39999000001310* into "Barcode" and click "Show barcode"
10. Note the same as above
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This just adds some missing commas and turns a pref into preference
in the messages displayed on the system information tab.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Make sure the pref is filled with a valid patron's category to display
the "register" link
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Otherwise we see a "Date expiry" entry in the form.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We should always use the category defined in
PatronSelfRegistrationDefaultCategory.
This could be discussed however.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If there is no default category defined in PatronSelfRegistrationDefaultCategory the full feature must be displayed.
We already hide the link from the OPAC main page, but the form is still accessible.
Test plan (for the whole patch set):
1. Turn on PatronSelfRegistration
2. Don't set PatronSelfRegistrationDefaultCategory
3. Go to the OPAC main page and confirm that the "Register here" link is
not displayed
4. Hit opac-memberentry.pl and confirm that you are redirected to the
OPAC main page
5. Go to the about page and confirm that you see a warning in the
"System information" tab
6. Set PatronSelfRegistrationDefaultCategory to an invalid patron's
category
7. Repeat 3, 4, 5
8. Set PatronSelfRegistrationDefaultCategory to a valid patron's
category
9. Self-register a patron and confirm it works as expected
10. Edit PatronSelfRegistrationBorrowerUnwantedField and confirm that
you cannot remove dateexpiry and categorycode
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Exclude self smtp server from all the servers being updated to not default if self is_default
Signed-off-by: Émily-Rose Francoeur <emily-rose.francoeur@inLibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It is not possible to perform batch patron modification without selecting
a patron attribute
Test plan:
Test the batch patron modification tool, with or without extended
attributes.
The error was
Can't call method "category_code" on an undefined value at /kohadevbox/koha/tools/modborrowers.pl line 407
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At some stage we lost some of the core statuses. This patch simply
adds them back into the list.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I missed a test case when doing follow-ups before.. this patch catches
that case and create the required authorized value to allow
ModSuggestion to succeed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch
2. Place 2 or more holds for a patron and trigger them so they are waiting holds.
3. Now go to both moremember.tt and circulation.tt for that patron.
4. Confirm that you now see a 'Waiting here since' message.
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates rotating collection templates so that title tags can
be more easily translated.
The patch also makes some corrections to breadcrumb navigation and page
headers to make sure they are consistent with titles.
To test, apply the patch and confirm that the following rotating
collection pages have the correct title tags:
- Tools -> Rotating collections
- Rotating collections list
-> New collection
-> Edit collection
-> Delete collection -> Confirmation page
-> Transfer collection
Signed-off-by: Salah Ghedda <salah.ghedda@inLibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At some point the option for 'undef' was removed from te sort options
and was collapsed to yes/no
The dropdowns when adding a new field were missed, this patch corrects that.
While undef in a mappings file wil stil load, when saving we should not privde undef any longer
To test:
1 - Browse to bottom to add a new field on the 'Bibliographic records' tab in
Administration > Search engine configuration (Elasticsearch)
2 - Set sortable column to undef, set other columns and provide a valid field
3 - Click '+Add'
4 - Click 'Save'
5 - At top of page you receive an error:
An error occurred when updating mappings: DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Column 'sort' cannot be null at /kohadevbox/koha/Koha/SearchField.pm line 37 .
6 - Apply patch, restart all
7 - Add a new mapping, your only choices are Yes/No
8 - Save mapping
9 - Confirm it saves correctly
Signed-off-by: Salah Ghedda <salah.ghedda@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Turn on the housebound module ( HouseboundModule )
2. From a staff account add at leats one staff member as a Deliverer and a Chooser.
3. From a patron account click on the 'Housebound' tab. Add some deliveries.
4. Notice they sort with the oldest deilivery first.
5. Apply patch and reload the page.
6. Now the table is a DataTable and can be dymacially sorted.
Signed-off-by: Rhonda Kuiper <rkuiper@roundrocktexas.gov>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When adding and deleting holidays, holidays might return
unexpectedly.
To test:
1 - Enter a holiday repeated yearly on a range from the 1st of the month to the 5th
2 - Delete it
3 - Add a new holiday from the 20th to the 25th
4 - When saved, the holiday from the 1st to the 5th is also added again.
5 - Apply patch and restart_all.
6 - Repeat steps 1-3. Notice that the holiday from the 1st to the 5th is no longer added and it has properly been cleared from the cache.
7 - Sign off! :D
Signed-off-by: Salah Ghedda <salah.ghedda@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the pre-formatting of notice templates conditional on the content type.
Test plan:
1) Navigate to tools > Notices and slips
2) Edit the notice with the code of HOLD
3) Under print, paste the following
<p>Please collect within 10 days from the date of this letter and don't forget to bring your library card with you.</p>
<p>Be aware that opening hours vary at different library branches so if in doubt double check the times before you visit.</p>
<p>Should you no longer require this item please contact us so we can make it available for another customer.</p>
<p>Thank you</p>
4) Check the box that says HTML message and save the notice
5) In Patrons, select a patron and in Patron messaging preferences, check the box in the Email column for Hold filled
6) Find a record in the catalogue
7) Copy the barcode for one of the items
8) Place a hold on the item for the patron you selected
9) Navigate to Circulation > Check-in
10) Paste the barcode in the Check-in box and click Check-in
11) In the pop-up box, click Confirm hold
12) In the command line, run perl misc/cronjobs/gather_print_notices.pl --letter_code=HOLD --html /tmp
13) cd /tmp
14) There should be a file in there called 'notices_HOLD-date.html
15) cat this file
16) The html you pasted in the template will be wrapped in a <pre> tag
17) Apply patch and restart_all
18) rm the notices file that was created
19) cd /kohadevbox/koha
20) Select a new record from the catalogue and repeat steps 7-15 for this record, using the same patron
21) This time, the html file should not contain the <pre> tag
22) Sign off!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the `cancellation_requested` attribute to the hold
object definition, and allows embeding it as on the different holds
endpoints that migt be useful.
To test:
1. Apply this patches
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t \
t/db_dependent/api/v1/*holds.t
=> SUCCESS: Tests pass!
3. Play with your REST tool (Postman?) on the following endpoints:
GET http://localhost:8081/api/v1/holds
GET http://localhost:8081/api/v1/patrons/:patron_id/holds
on both, pass and not pass the `x-koha-embed` header with
`cancellation_requested` on it.
=> SUCCESS: It is easy! You see the attribute and you don't, and the
content makes sense!
4. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
