Since nobody is currently working on the zebra layer introduced by bug
8233, Solr won't never work.
Some code has been introduced in 3.10 to prove several search engines
can cohabit into Koha but no help/fund has been found to go ahead.
It is useless to keep this code and to maintain an ambiguous situation.
I think the indexes configuration page could be restore later if someone
else introduces a new search engine into Koha.
Test plan:
Look at the code introduced by bug 8233 and verify all is removed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch affects only the area displayed on Advanced Search
by setting the AdvancedSearchTypes OPAC system preference
accordingly. Prior to this patch, no filtering based on
OpacHiddenItems was done. This patch determines if itemtypes,
collections, or shelving locations are hidden and prevents
them from being shown.
TEST PLAN
---------
1) Back up your DB (always handy)
2) Set the Searching system preference AdvancedSearchTypes to:
'itemtypes|ccode|loc' (without the single quotes).
3) Set the OPAC system preference OpacHiddenItems to include the
lines:
itype: [{list of itemtype codes separated by commas}]
location: [{list of comma delimited shelving location codes}]
ccode: [{list of comma delimited collection codes}]
Make sure to exclude one value for each, so there will be at
least one known thing on each tab.
4) Open the OPAC.
5) Click on 'Advanced Search'
-- three tabs appear: Itemtypes, Collection, Shelving location
-- Everything is visible
6) Set the Searching system preference AdvancedSearchTypes to:
'itemtypes | ccode | loc' (without the single quotes).
7) Refresh the OPAC.
-- There will be three tabs, but ugliness ensues.
8) Apply the patch
9) Refresh the OPAC.
-- You will see: Itemtypes, Collection, Shelving location
-- Only excluded values from OpacHiddenItems will be seen.
10) Run koha qa test tools
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Small rewording in comment only.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we're using the $query_type variable to detect if this pre-built
query is PQF, we need to use PQF syntax (rather than QueryParser
syntax) when adding to the query. I've made a lot of notes of somewhat
incoherent notes on Bugzilla talking about PQF, CCL, and QP syntaxes,
but I'm hoping to refine these notes on a wiki page for future
reference.
_TEST PLAN_
1) Set 'Suppress in Opac' (ie 942$n) to 1 for one record
2) Re-index Zebra
3) Set 'OpacSuppression' to 'Hide'
4) Set 'UseQueryParser' to 'Do not try'
5) In the staff client, do a search that will return that suppressed
record as well as a few records that are NOT suppressed
6) Note that you can return that suppressed record in the staff client
7) Do the same search in the OPAC
8) Note that the suppressed record doesn't appear
9) Set 'UseQueryParser' to 'Try' && re-run the OPAC search
10) Note that no results appear (the logs will probably mention a
ZOOM error)
11) Apply patch
12) Re-run the OPAC search
13) Note that the suppressed record doesn't appear, and that the
not suppressed records are showing (it's important that you are
getting some results...as ZOOM errors are silent in the UI).
14) Set 'UseQueryParser' to 'Do not try'
15) Re-run the search
16) Note that the suppressed record doesn't appear, and that the
not suppressed records are showing
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - hidden records are hidden.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
OpacSupressions manipulates the query string after the buildQuery
call and so breaks with queryParser enabled. This patch adds
checks for queryParser and manipulates the query before passing it
to buildQuery if it is enabled, but leaves the post buildQuery
manipultation when queryParser is disabled
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Adding a sing after test
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the use of smartmatch operators in the search code.
Regards
To+
Edit: this revision uses 'grep' instead of Lists::MoreUtils::any
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested search, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When searching (at the OPAC or pro), facets can be enabled but never
disabled. So a user is obliged to relaunch the search.
This patch adds a new link "[x]" at the right of each selected facet.
This link relaunch the search without this facet.
Test plan:
- Launch a search (OPAC and pro)
- Enable some facets
- Disable some facets
Signed-off-by: sonia bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patches pass all tests and QA script. Nice feature!
Tested in Boostrap and Prog, adding end removing multiple
facets in different sequences, adding and removing the
availability limit.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also store interface (intranet, opac) in context to not have to pass it
as parameter.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like biblio, this feature provides an authority search history.
This history is available for connected and disconnected user.
If the user is not logged in Koha, the history is stored in an
anonymous user sessin.
The search history feature is now factorized in a new module.
This patch adds:
- 1 new db field search_history.type. It permits to distinguish the
search type (biblio or authority).
- 1 new module C4::Search::History. It deals with 2 different storages:
DB or cookie
- 2 new UT files: t/Search/History.t and t/db_dependent/Search/History.t
- 1 new behavior: the 'Search history' link (on the top-right corner of
the screen) is always displayed.
Test plan:
1/ Switch on the 'EnableOpacSearchHistory' syspref.
2/ Go on the opac and log out.
3/ Launch some biblio and authority searches.
4/ Go on your search history page.
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Delete all your history (cross on the top-right corner)
11/ Check that all your history search is empty.
12/ Launch some biblio and authority searches.
13/ Login to your account.
14/ Check that all previous searches are displayed.
15/ Launch some biblio and authority searches.
16/ Check that these previous searches are displayed under "Current
session".
17/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All patches together pass QA script and tests.
Also, new tests in t/db_dependent/ pass.
Tested in all 4 OPAC themes, being logged in and anonymous.
Anonymous search history will be appended to personal search
history after logging in.
Also verified that cleanup_database still purges search history,
now also including the authority searchs.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes the following issue: in installations that are using
zebra DOM indexing for bibliographic records, tag searching in OPAC
doesn't work properly (clicking on any tag in OPAC leads to "404 error").
To test: ensure that with patch applied:
1) problems with tag searching get resolved for [some] test
configuration with biblio DOM indexing enabled,
2) there are no apparent tag-searching-related regressions in OPAC,
in some yet another test installation configured with legacy
(grs1) indexing mode for biblios.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In Advanced Search, the list of available language is long and will only
get longer. For a library offering books in 2-3 languages, that is
offering too many options to the user (most of the small libraries we
deal with only offer documents in two languages).
Code changes:
Languages.pm: Extract getAllLanguages to make a more customizable
getLanguages (have getAllLanguage call it, so rest of codebase is
oblivious to the change). Build array returned based on system pref if
corresponding argument is set.
search.pl and opac-search.pl: call getLanguages instead of
getAllLanguages.
TESTING
0) All language codes are iso 639-2 (three characters)
1) in OPAC, Advanced search, open Language box, acknowledge 30+ items.
2) in Intranet, go to system preferences AdvancedSearchLanguages,
enter "ita|eng"
3) back in OPAC, refresh screen, acknowledge only Italian and English
are listed.
4) in Intranet, click Search then click "More options" to make the
Language box appear. Acknowledge limited options.
5) Regression Test: Back to the preference, empty the field then save.
Go back to the OPAC and Intranet search, refresh the page, then the
Language drop-box will now contain 30+ items.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If hidelostitems is enabled, and the result of an opac search is a single
lost item, then the OPAC will display a 404 error, rather than a
"no results" screen.
Test Plan:
1) Catalog a record/item such that it is the only result for some search
e.g. Give it the title 'zxcvb'
2) Enable hidelostitems
3) Mark this item as lost
4) Perform an OPAC search that should result in a redirect to this record
5) Notice you a redirected to a 404 error
6) Apply this patch
7) Repeat step 4
8) Note you new get a "No results found!" page instead
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Michot <nmichot@voila.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Remove unit tests for ParseSearchHistoryCookie, which doesn't exist
anymore
- Add unit tests for ParseSearchHistorySession and
SetSearchHistorySession
- Remove/Modify comments about search history cookie
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Tests fixed and moved, and comments tidied up
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Storing search history into cookie can cause problems, due to the size
limitation of 4KB.
The solution here is to store search history into the CGI::Session
object, so there is no size limitation (but anonymous search history
still remember up to 15 requests max.)
Test plan:
- Go to OPAC in anonymous mode.
- Check that the "Search history" link is *not* shown in the top right
corner of the page
- Make some searches on /cgi-bin/koha/opac-search.pl
- The "Search history" link should appear. Click.
- Your search history should be displayed.
- Try to log in with invalid username/password
- Go back to search history, it's still there
- Now log in with valid username/password
- Your anonymous search history should be saved into your own search
history.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Restoring original sign offs and comments below
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Well, search history saving is similar before and after patch.
i.e. anonmymous search is saved when user logs in, but cookie
KohaOpacRecentSearches is empty.
Shows current an previous session searches
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
All tests and QA script pass, works as described.
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test in OPAC:
* With the OPAC System Preference EnableOpacSearchHistory set
to Keep, a simple search triggers the warning patched on
line 626 of opac-search.pl
* Selecting a search result item with no Collection Code
set triggers the warning patched on line 576 of opac-detail.pl
* Have an item with Collection Code. Check that the Collection
Code shows.
* Collection Code is set by editing an item in the staff client
(952$8)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Show any relevant results from the OverDrive ebook/audiobook service
on the OPAC search. This is done by showing a link with "Found xx
results in the library's OverDrive collection" at the top of search
results and linking to a page that shows the full results.
This requires an OverDrive developer account, and is enabled by
setting the OverDriveClientKey and OverDriveClientSecret
system preferences. In addition, this patch adds the
OverDriveLibraryID system preference.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Remove uncalled sub GetCcodes
Also remove comment in opac-search.pl which is
remaining reference to it and serves no
useful purpose
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add validation of the value of the KohaOpacRecentSearches. In
particular, this patch avoids the generation of an internal server
error when the OPAC is presented with an old cookie that uses the
old Storable-based serialization.
This patch also moves parsing of the cookie value into a
new routine in C4::Auth, ParseSearchHistoryCookie, and adds
a test case.
To test (in conjunction with the previous patch):
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Apply this patch and the previous one.
- Do *not* clear the KohaOpacRecentSearches cookie
- Check the search history and verify that no searches
are listed any more
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- Clear the KohaOpacRecentSearches cookie
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verified that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test
1/ logout
2/ search "bar" (added to the history)
3/ search "féé" => history is empty
Apply patch
1/ logout
2/ search "bar" (added to the history)
3/ search "féé" => added to the history
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The prototype is not consistent, GetBranchCategory should return only 1 result
and GetBranchCategories should not have a categorycode argument.
This patch fixes that.
Test plan:
1/ Try to add/remove/modify a library.
2/ Add some groups
3/ Add these groups to a library
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch groups all loops on the new_results array into one.
It is useless to loop on the same results array several times.
Test plan:
Quite hard to test all cases.
This patch deals with 5 sysprefs:
COinSinOPACResults, Babeltheque, TagsEnabled, TagsShowOnList and
OpacStarRatings.
Try to enable/disable all of them and verify there is no difference with
and without this patch.
The only different will be: The Babeltheque information should be displayed
even if the COinSinOPACResults syspref is disabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This revised patch works fine for me, thanks.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified following system preferences still work as expected:
- COinSinOPACResults on/off
- TagsEnabled, TagsShowOnList, TagsInputOnList on/off
- OpacStarRatings
Couldn't test Babeltheque functionality as this requires an account.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
For reasons I cannot fathom, the split() in handling multi-branch
limits was not coming up with a valid search group code. Replacing
the split() with a substr() and creating the CGI parameter as a string
rather than as an arrayref fixes the problem. This problem may not
affect all installations, since I tested this exact feature just under
two months ago and it worked fine, and none of the relevant code has
been changed since then that I can see.
To test:
1) Create search group, and add at least one library to it, in
/cgi-bin/koha/admin/branches.pl
2) Apply patch
3) Try doing a search limited to your search group, making sure that
the search will match items that belong to a library in the search
group
4) Sign off
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
I have failed to recreate the problem on three different dev installs,
both on Ubuntu and Debian, but the current patch does not break
anything as far as I can tell, so I'm signing off.
I tested with two libraries in the same search domain, with each
library owning a different book by the same author. Searching for
the author in
- all libraries,
- individual libraries and
- the search domain that contains both libraries
all return the expected results.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
I couldn't reproduce the problem, but didn't find any regressions.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test plan:
1 - turn on EnableOpacSearchHistory
2 - launch some searches at the opac
3 - go to your search history
4 - there is no history!
5 - apply this patch
6 - retry steps 1 to 3
7 - your history search is available!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This does fix the bug, but does undo the change to make the cookie
utf-8 safe, however I think that change was done in the wrong way so
I am happy to sign this off
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Wondering if the comment line should be deleted now too.
Patch fixes the problem.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test
Search in the OPAC both logged and logged out
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
When I turn off XSLT for the OPAC I can recreate the problem.
After applying the patch things work as expected for all
combinations of:
- Search results and detail view
- Logged in and not logged in
- XSLT and non-XSLT view
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, QA script and test plan.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In current implementation (mostly commented out in this patch)
uses heuristic to guess which strings need decoding from utf-8
to binary representation and doesn't support utf-8 characters
in templates and has problems with utf-8 data from database.
With this changes, Koha perl code always uses utf-8 encoding
correctly. All incomming data from database is allready
correctly marked as utf-8, and decoding of utf8 is required
only from Zebra and XSLT transfers which don't set utf-8 flag
correctly.
For output, standard perl :encoding(utf8) handler is used
so it also removes various "wide character" warnings as side-effect.
Test scenario:
1. make sure that you have utf-8 characters in your biblio
records, patrons, categories etc.
2. try to search records on intranet and opac which contain
utf-8 characters
3. install language which has utf-8 characters, e.g. uk-UA
dpavlin@koha-dev:/srv/koha/misc/translator(bug_6554) $
PERL5LIB=/srv/koha/ perl translate install uk-UA
4. switch language to uk-UA and verify that templates
display correctly
5. test search and Z39.50 search and verify that caracters
are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I followed the test plan, adding utf-8 characters to library names,
patron categories, titles, and authorized values. I tried the uk-UA
translation and everything looked good.
When performing Z39.50 searches for titles containing utf-8 characters I
got results which were still occasionally contaminated with dummy
characters [?] but I assume this is Z39.50's fault not the patch's.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Already signed, add mine.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This feature enables a particular library's items to be emphasized and moved
to the first position on the search results and details pages of the OPAC.
It is enabled by the sytem preference HighlightOwnItemsOnOPAC.
To choose which branches items are emphasized, use the system preference
HighlightOwnItemsOnOPACWhich. It has two modes.
If set to PatronBranch, the items emphasized will be those of the same
library as the patron's library. If no one is logged into the opac, no
items will be highlighted.
If set to OpacURLBranch, the library is chosen based on the Apache
environment variable BRANCHCODE.
For example, this could be added to the OPAC section of koha-httpd.conf:
SetEnv BRANCHCODE "CPL"
The point of this feature is to allow each library on a given Koha server
to have a specific subdomain for the opac where that library's items are
empasized. That was http://branch1.opac.mylibrary.org will emphasize the
items of branch1, while http://branch2.opac.mylibrary.org will emphasize
the items of branch2.
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds the ability to add groups to the library select
pulldown on the opac, if it is enabled.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Go to Administration › Libraries and groups
4) Create a new group, or edit an existing one
5) Ensure the 'Show in search pulldown' checkbox is checked
6) Save the group
7) Enable OpacAddMastheadLibraryPulldown if it is not already enabled
8) Load the OPAC, try the group search from the libraries pulldown menu
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Yes! Now this works, and well.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed NoZebra vestiges. This comprises several code blocks that depend on the NoZebra syspref and NZ related functions/methods.
C4::Biblio->
GetNoZebraIndexes
_DelBiblioNoZebra
_AddBiblioNoZebra
C4::Search->
NZgetRecords
NZanalyse
NZoperatorAND
NZoperatorOR
NZoperatorNOT
NZorder
C4::Installer->
set_indexing_engine
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Koha was not previously escaping CGI input, which caused problems for
highlighting and is a security issue.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Thx for fixing this.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This problem happens because there isn't a operator "phr" in the values
of callnumber and standard number search. So many results aren't the
corrects ones.
Test plan:
- Apply the patch
- In the dropbox search menu of OPAC main page header, the callnum
should have only callnum
- In OPAC advanced search the callnumber and standard number options
shouldn't have "phr"
- In staff client advanced search the callnumber and standard number
options shouldn't have "phr"
- Change OPACNumbersPreferPhrase and IntranetNumbersPreferPhrase to "use"
- The options listed before should use now the operator "phr"
- This will resolve the problems with the searches of callnumbers and
standard numbers in OPAC and staff client (spaces problems, no
results, inconsistent results, etc...)
Sponsored-by: KEEP SOLUTIONS
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I don't know how to reproduce the searching problems described in the
bug, but I can confirm that the patch works correctly to enable/disable
the use of 'phr' in the searches described in the test plan.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
System preferences work as described, switching indexes in
OPAC and staff.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds the following enhanced content to the OPAC, all controlled by
separate sysprefs:
1) A "Readometer" which summarizes reviews on the OPAC detail page
2) A tab with snippets of critical reviews on the OPAC detail page
3) A computed rating on the results page
To test:
Find a book that is listed on IDreamBooks.com (you may have to make
sure that you have the first edition), and one that is not. Try
each of IDreamBooksReadometer, IDreamBooksReviews, and
IDreamBooksResults sysprefs, taking note of the content appearing (or
not) as appropriate.
Updated to add missing CSS to new theme.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased to latest master 2012-12-31
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When search failed, this patch gets the keyword(s) and add them
to the string entered by the user to OPACNoResultFound
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In opac-search.pl and search.pl, this patch moves the $lang variable from the end to the begining of the script, and use it as a parameter for getAllLanguages.
In Languages.pm, getAllLanguages function is modified :
- if no parameter is passed to the function, it returns english languages names
- if a $lang parameter conforming to RFC4646 syntax is passed :
-- the function returns languages names translated in $lang if possible
-- if a language name is not translated in $lang in database, the function returns english language name
To test, set your opac and staff interface in english and in other languages and check search.pl and opac-search.pl :
- If language names in your languages_description table are translated in the same language you use for your GUI, the language names in dropdown list will be translated in this language (+native name).
- If your GUI is in english, or in a language into whitch languages names are not translated in languages_description, the dropdown list will stay in english (+native name).
Signed-off-by: Marc Veron <veron@veron.ch>
Patch behaves as expected.
With Opac language set to French I got all languages with French language name.
With German (de-DE), I got only a few with German language names (and all other with English ones),
this was due to missing entries for de-DE in table language_descriptions.
This behaviour is consistent with the description above.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested language list in OPAC and staff advanced search is translated
properly after applying the patch. Checked that language switcher still
works like it should.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Fixed typo in POD.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
When working with hierarchical subject headings, it is sometimes helpful
to do a search for all records with a specific subject, plus
broader/narrower/related subjects. This patch adds a suggestion plugin for
these "exploded" subject searches to Koha. Note that this patch depends on
both bug 8211 AND bug 8209.
To test (NOTE: this test plan covers both 8211 and 8726):
1) Make sure you have a bunch of hierarchical subjects. I created
geographical subjects for "Arizona," "United States," and "Phoenix,"
and linked them together using 551s, and made sure I had a half
dozen records linking to each (but not all to all three).
2) Do a search for su-br:Arizona (or choose "Subject and broader terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "United States"
3) Do a search for su-na:Arizona (or choose "Subject and narrower terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "Phoenix"
4) Do a search for su-rl:Arizona (or choose "Subject and related terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona," the
records with the subject "United States," and the records with the
subject "Phoenix"
5) Ensure that other searches still work (keyword, subject, ccl,
whatever)
6) Use "Did you mean?" page in admin section to enable ExplodedTerms
plugin
7) Do a keyword search on the OPAC, confirm that searching for exploded
terms is suggested.
8) Do a subject search on the OPAC, confirm that searching for exploded
terms is suggested.
9) Do a non-keyword, non-subject search on the OPAC, confirm that
searching for exploded terms is NOT suggested.
10) Disable ExplodedTerms plugin and enable AuthorityFile plugin.
11) Do search on OPAC, confirm suggestions are made from authority file.
12) Sign off
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Split into two patches. This patch includes only the functionality.
This patch enables the shelving location facet as an
alternative to the branches fact in two situations:
A) SingleBranchMode is enabled
B) There is only one branch in the branches table
Test Plan:
1) Catalog multiple items with different shelving locations.
2) Test enable by enabling SingleBranchMode
3) Test enable by deleting all but one branch
Based on initial patch by Ian Walls.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested cases 2) and 3) successfully in OPAC and staff client
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This change some code a bit strange, that generate strange effetcs.
Now we use $cgi->param to get the values.
Test: search at the opac and intranet using limit, etc.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
One of the ideas behind authority records is that users who search for
one term should have related terms (according to the authority file)
suggested to them. At the moment, Koha doesn't do that. Adding an
authority searching step to regular searches and displaying any
suggestions in a "Did you mean" bar at the top of the results would be
very useful.
This commit adds a Koha::SuggestionEngine class which is in charge of
getting suggestions from individual suggestion engine plugins, which
much be in the Koha::SuggestionEngine::Plugin::* namespace, and extend
Koha::SuggestionEngine::Base. Suggestions are loaded asynchronously
using AJAX, and a link to a page with suggestions is provided for users
with Javascript turned off.
The AuthorityFile suggestion engine plugin looks up the specified search
terms in the authority file and then suggests searches for records using
matching authorities.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased 2 August 2012 and incorporated QA feedback
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan:
- Verified database update added system preference correctly,
pref defaults to OFF
- Verified search results and detail pages in OPAC and staff
still worked the same as before
* for no results
* with results
- Activated system preference and tested various searches
* Searches from simple search
* Searches from advanced search
* Search links in records
- Deactivated Javascript - verified fallback works correctly
Notes:
- Suggested terms can include autorities with no linked records.
- When combining more than one search option using advanced search
this results in "no suggestions" more often. Feature works best
from simple search.
Overall great feature making use of authorities in a user friendly way!
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master 2012-09-10
Signed-off-by: wajasu <matted-34813@mypacks.net>
This enhancement extends the OpacSuppression feature with an optional IP address range within which results are _not_ suppressed.
To test
* turn on OpacSuppression (Administration->System preferences->Cataloging) and enter an IP address range in the OpacSuppressionByIPRange field.
* set at least one bibliographic record to suppress=1 (enter '1' in 942$n)
* fully reindex your data
* do an OPAC search that should bring up your suppressed record
* try with IP ranges that match your IP and ranges that don't
Signed-off-by: Marc Veron <veron@veron.ch>
Tested following the scenario above. Works as expected.
Due to renaming of some variables the limits were only working for 'anonymous'
users. This patch fixes some variables, so limits are also added to history
when the user is logged in.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fix also freezing for some browser when performing a search query.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked paging (previous, next and navigating to page numbers) works.
Browser performance is fixed too.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a conflict in updatedatabase and removed kohaversion.pl from the patch.
Patch works nicely, tested with different searches and limits.
Note: Sort options don't get into the history still.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This is for MARC 21 only.
Made following changed:
- In getFacets in C4/Koha.pm added item type facet for 952y and 942c
- In getRecords in C4:Search.pm added code to get description of itemtype codes
- facets.inc in both staff and opac to show item types related label in the facets block
To test:
Add records such that a certain itype (say BK) is present in both 942c and 952y in two DIFFERENT records.
Run a search where both test records are present. Test to see if itype types are presented in the facets block (both OPAC and staff).
Click on the itype (say BK), both the test records should appear in the refined results. This shows that the feature works for both 942c and 952y.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
QA Comment: fixed capitalization in template includes according to HTML4 coding
guideline ("Item types" instead of "ItemTypes")
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
RSS links for searches without results didn't have the search terms.
To test:
- Search for something with results and check RSS link
- Search for something with no results and check RSS link
In both cases your search should show up in the link.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
RSS Link works in both cases listed in test plan.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
patch applied to commit eb3dc448d2
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Turned on star ratings in the opac on details and results
Searched for titles - saw the stars
Clicked on a title
Clicked on the stars
Clicked on the stars to change my rating
Logged out
Tried to click on stars
Logged in as different user
Rated items that were rated already and saw average change
Changed preference to show only on detail and repeated tests
Changed preference to now show stars
All above tests passed. Signing off.
Rebased 3-19-12 by Ian Walls
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
3 features:
- adds social network information in search results
- adds babeltheque data in opac-detail
- adds social network links in opac-detail too (google+, twitter, mail
and co.)
This lays the foundation for further changes for report 7310.
Implements following points from the wiki page List permissions:
1) Preference that controls if users may create public lists in opac.
2) New add/delete own/delete other permissions per list.
Code has been changed (in some cases refactored). New permissions are not yet visible; with this patch current functionality is kept as much as possible while resolving several issues, improving permissions and extending the code for further developments (using the new permissions and sharing lists).
Feb 23, 2012 (revision): Changed defaults for new lists. Could also remove routine GetRecentShelves by using GetSomeShelfNames in catalogue/search.pl just as opac-search.pl already did. (More consistent.)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Feb 29, 2012: Automerge version.
March 5, 2012: Rebase for pushed 4912 patch.
March 21, 2012: Rebased. Resolving some conflicts in relation to pushed report 7719.
Adds the ability to perform advanced searches in both the OPAC and staff client on more than
a single AdvancedSearchType at a time. Support included for Itemtype, Collection Code and Shelving Location.
AdvancedSearchTypes syspref preference is repurposed; no longer a single value, it can now take
multiple item code fields separated by "|". The order of these fields will determine the order
of the tabs in the OPAC and staff client advanced search screens. Values within the search type
are OR'ed together, while each different search type is AND'ed together in the query limits. The
current stored values are supported without any required modification.
Each set of advanced search fields are displayed in tabs in both the OPAC and staff client. The
first value in the AdvancedSearchTypes syspref is the selected tab; if no values are present, "itemtypes"
is used. For non-itemtype values, the value in AdvancedSearchTypes must match the Authorised Value name, and
must be indexed with 'mc-' prefixing that name.
<li> elements in tab are assigned unique IDs, so the text of the tab can be altered to match the
library's needs (using JQuery)
The logic to handle the 5 element row limit has been moved from the Perl to the templates, since Template::Toolkit
has a simple method for extracting the count of an element in a loop and performing 'modulus' on it.
2011-12-21: Incorporated changes recommend by Owen Leonard on bug report.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. Amended this patch for a small spelling issue: supress->suppress. Could not suppress it ;)
"Add to Cart" links in the OPAC should reflect whether a title
is already in the Cart. On the results, list, and detail pages
the "Add to Cart" link will say "In your cart (remove)" if the
title is in your cart. The "(remove)" link will remove the title.
This patch adds a check of the biblionumbers in the cart to the
relevant scripts and sets a variable for the template governing
whether to show "Add to cart" or "In your cart."
Pages to test:
- the search results page
- any detail page (normal, MARC, ISBD)
- any list contents page (/cgi-bin/koha/opac-shelves.pl?viewshelf=XX)
Situations to test:
- Add a single item to the Cart from the above pages
The link should change from "Add to cart" to "In your cart (remove)"
The count of items in your cart should reflect the addition, and the
notification box should appear.
- Remove a single item from the Cart from the above pages
The link should change from "In your cart (remove)" to "Add to cart."
The count of items in your cart should reflect the removal, and the
notification box should appear.
- View an item which is already in the cart from the above pages
The cart links should reflect whether the title is already in the cart.
- Remove one or more items from the Cart via the cart pop-up window
View the above pages as you do so to verify that the operation is
reflected immediately by the state of the "in your cart" links.
- Empty the Cart from the cart pop-up window
View the above pages as you do so to verify that the operation is
reflected immediately by the state of the "in your cart" links.
Tested in Firefox 9, Chrome 16, IE 7, and Opera 11.6 on Win 7
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Changed searchResults() interface
Added trailing \n when parsing OpacHiddenItems to make YAML happy
XSLTParse4Display() and buildKohaItemsNamespace() take hidden
items as input param
Removed numbering from the search results, looks wrong with
hidden items
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds display of local cover images in the following places:
1. OPAC Results page
2. OPAC Details page
3. Separate image viewer page for the OPAC
4. Intranet Details page
5. Separate image viewer page for the Intranet
Display in the Details and (OPAC) Results pages is handled via Javascript
rather than via direct embedding, to better handle the situation where most
records have local cover images, but a few do not.
Local cover images do not currently display in the Intranet Results page
How to use/test :
Assign user permission to the user Tools > (upload_local_cover_images Upload
local cover images). In order to upload local images, login to the staff
client. Go to Home > Tools > Upload Cover Images. Here you can upload cover
images either singly or in bulk in the form of a zip file. If uploading
singly, click on image file, browse the image from your local disk, type in
the biblio number of the catalogue entry and press upload. If uploading in
bulk as a zip file, the zip file must contain (in addition to cover images)
one text file named either datalink.txt OR idlink.txt. This file should
have mapping of biblionumber to image file name in the zip one per line
with comma or tab as delimiters. For example:
1, scanned_cover_image_of_bib_no_1.jpg
2, scanned_cover_image_of_bib_no_1.jpg
Cover images will be resized to a large image of 800x600 and a thumbnail of
200x140. Depending on the setting of AllowMultipleCovers, it is possible to
upload multiple images for a single bibliographic record. However, even if
multiple covers are permitted, you have the option of replacing the existing
covers by checking the "Replace existing covers" option on the upload screen.
1. The patch adds a menu link in Tools from where you can upload local cover
images
2. It adds a user permission to enable access control to this menu item under
Tools
3. It adds a system preference OPACLocalCoverImages under Enhanced Content.
This needs to be turned on to show local cover images in OPAC.
Once you have uploaded local images, if you search for the biblio, the local
cover should show up in search as well as search detail pages in the OPAC, and
the details view in the Intranet.
Koustubha Kale is working on another patch which will allow us to set a cover
image source priority in system preferences, and which will then gracefully
fail over to the next source if image is not available from the first choice
source.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Koustubha Kale <kmkale@anantcorp.com>
Rebased the patch because it was failing with koha-tmpl/intranet-tmpl/prog/en/css/staff-global.css due to changes pushed in master.
Applies cleanly now.
When no size info is available, an empty string is
sent to the TT (if nothing is sent, the TT engine
will display another information, irrelevant for Koha).
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Works beautifully!
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
- ensure that without cookie, language selection is based on browser
preferences
- refactor function to obtain langugage for stem in search (opac + intranet)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
To reproduce the bug:
- Activate en and fr-FR for OPAC
- Clear your browser cookies
- Select your language preference in your browser: fr, fr-fr, en
- Load OPAC main page
- OPAC is displayed in English, rather than French as asked by browser
preferences
Apply the patch and test:
- Clear your browser cookies
- Load OPAC main page
- Pages are displayed in French
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch changes the GetCOinsBiblio subroutine to take a MARC record object
(as returned from GetMarcBiblio) instead of a biblionumber. The first thing the subroutine
did was GetMarcBiblio, and the $biblionumber passed was never used again.
This subroutine was only used 3 places: opac/opac-search.pl, opac/opac-detail.pl,
and C4/VirtualShelves/Page.pm. In the first and last cases, it was used in a loop.
In the last two cases, a call to GetMarcBiblio had already been done. This is expensive, and
we were doing it twice per record.
For opac/opac-search.pl, the call to GetMarcBiblio was moved to just outside GetCOinSBiblio;
this will not change the performance at all. But for opac/opac-detail.pl and C4/VirtualShelves/Page.pm,
a redudant call to GetMarcBiblio is now avoided.
To Test:
1. Enable COinSinOPACResults in system preferences. Perform a search in the OPAC.
Verify that the COinS spans are showing up
2. View the detail record of one of the returned items. Confirm that the COinS span exists on the detail page.
3. View a list in the OPAC. Confirm that COinS spans are still showing up
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Add paging in opac-detail when coming from a search to be
able to continue viewing the previous and next register
from the detail without returning to the results.
The partial list pagination can be showed to increase forwarding
or rewinding in the pagination.
It's implemented for Zebra search and not build_grouped_results.
The param busc with all the information from the search is stored
on the session when running opac-search and opac-detail, outside these
pages the busc param is removed from the session.
A list of the biblionumbers inside the OPACnumSearchResults range
is passed to avoid repeating the searching everytime we see the
previous or next biblio. The searching will be run again when
we are going to exceed the list and a new one will be calculated
from the new search.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch solves the situation that news is in another language than
the Koha interface AND makes that themelanguage routine is always called
the same way in order to prevent mixed display.
It fixes also a bug related to language preselection based on web
browser prefered language.
September 9: Adjusted with input of Frederic Demians.
Septembre 10: Avoid circular dependency, as pointed by Chris Cormack.
Templates related functions are moved from C4::Output to C4::Templates
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds a system preference for displaying content under the "Refine your Search" menu
on OPAC search results. Arbitrary HTML can be added, like OpacNav, opacheader, opaccredits
and other such system preferences
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The user input for sort_by value was used without care, resulting the possibility for user to set any Template Variable to 1.
This patch restrict the values to sort field.
The list of allowd_sortby was taken from 'includes/resort_form.inc'.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
If OPACGroupResults preference was set it was
shortcircuiting the template selection logic and
we didn't go to the advanced options field
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The patch for bug 5957 used an assignment operator instead of a comparison
operator. Replace the assignment operator with the string comparison that was
desired.
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fix the problem of searching on partial itemtypes strings
for instance, itemtype="ARTICLE DE PERIODIQUE", itemtype="PERIODIQUE"
searching on itemtype="PERIODIQUE" would also get "ARTICLE DE PERIODIQUE"
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds a new system preference, COinSinOPACResults, which toggles the inclusion of
COiNS/OpenURL/Z39.88 in the search results display. Default is 'on', continuing
the current behaviour.
Disabling this feature will result in a significant increase in search speed, since
each call to GetCOinSBiblio requires a separate parsing of the MARC record, and there are
<OPACnumSearchResults> calls to this routine with each search.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
MT4491 : limitation by library group
- the group list was not displayed in OPAC (even if everything else was here
- the group limit was not working due to a missing ()
author=jean et group=droit" resulted in:
author=jean and branch=b1 or branch=b2 or branch=b3
that is wrong (executed from left to right)
the fix add () to have :
author=jean and (branch=b1 or branch=b2 or branch=b3)
that is OK
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Based on patch from Fridolyn Somers with input of Frederic Demians.
Added new Searching preference maxRecordsForFacets.
This pref contains number of result records used in facet building.
Also added pref displayFacetCount (with thanks to Frederic).
Follow up patch takes care of install issues; functionality can already be tested with this patch only.
Updated on March 17 for changes in include files.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch ensures that the OPAC library selection masthead will always default
to the branch that is currently being searched. This only applies to systems
with multiple branches and OpacAddMastheadLibraryPulldown turned on.
To test: do a search in the OPAC, limiting by branch. The search results will
still have that branch selected in the masthead dropdown.
This patch also fixes bug 5852 and bug 3778.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Liz Rea <lrea@nekls.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Previous commit modified checks for the item-level_itypes preference
to look for a different variable name but didn't update where that
variable is set in Auth.pm.
Other scripts perform a direct check of item-level_itypes and must
continue to use the name of the variable in the database.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Done within opac and intranet templates, still needs to be done for corresponding scripts.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
applied to git tag 'v3.02.00-rc'
Frédéric Demians:
- Rebased this patch to HEAD
- Solved a merge conflict
- The patch works as described here:
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=4289
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds a new preference to allow librarians to
add content to the no results found page if they want.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed surrounding <p> in template to <div id="noresultsfound">
Will send follow up patch adding sys pref to translated sql files
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Re-doing Nahuel's fix so that it applies to master
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Loop on results should stop before $i==@servers. Adding fix for warnings on undefined values in comparison for lines 485, 488 and 510.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Check OPACXSLTResultsDisplay instead of XSLTResultsDisplay when
determining whether to use the XSLT bib results stylesheet for
OPAC search results.
In the process, added a new $search_context parameter to
C4::Search::searchResults() to specify whether results
are to be served up for the staff interface or for the
OPAC.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Having the place multiple holds button at the top of the OPAC and staff search results has caused problems for some sites with tight holds policies; this syspref allows those sites to turn off the button.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
