1. The current C4::ClassSortRoutine::Dewey turns "306 Les" into "306_Les" for items.cn_sort and MARC-field 952$6, which results in "306.46 Les" being sorted before "306 Les" in the OPAC. With this patch, "306 Les" is turned into "306_000000000000000_Les".
2. Currently, call_number_asc and call_number_desc are set up to sort by 1=20, but this is mapped to Local-classification in ccl.properties, which is mapped to 952$o in record.abs.
This patch changes these sorts to use 1=8007, which is mapped to cn-sort and 952$6.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch begins the process of improving the COinS support in Koha to take
advantage of all the metadata available in the MARC format. COinS still doesn't
work quite right, but at least it seems to be following the standard now. The
COinS exported by C4::Biblio::GetCOinSBiblio now correctly identifies articles
from journals and books as such.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
In certain circumstances, ampersands would not be displayed properly in the
Staff client search results. This patch fixes that by ensuring that all the
doubled ampersands that Zebra inserts in XML indexing mode are replaced by the
correct single ampersand entity.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch enables the ACCTDETAIL notices (and any branch-specific derivatives) to use
<<branches.*>> and <<borrowers.*>> tokens
This patch also attempts to send the email from the branch email first, falling back to
KohaAdminEmailAddress if no branch email exists.
To test:
1. Enable AutoEmailOpacUser system preference
2. Add <<branches.*>> tokens to the ACCTDETAIL notice
3. Create a new patron, including:
a. test email address in the field matching your AutoEmailPrimaryAddress syspref value
b. username and password (required to send a notice)
c. any other required fields to save the record
4. Check you inbox. Notice should send instantly (no need to run process_message_queue.pl)
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When XSLT is enabled, the subject tracings on the details view (both OPAC and
Intranet) previously only searched on the subfield 'a'. In addition, searches
failed when the tracing included parentheses, and the XSLT display did not
include subfields other than abcdvxyz, even for those 6xx tags that have other
subfields.
This patch adds a syspref: TraceSubjectSubdivisons. When
TraceSubjectSubdivisions is set to "Don't include" (default), the subject
tracings in the XSLT details view will only search on subfield 'a'. When
TraceSubjectSubdivisions is set to "Include", the subject tracings will search
on all subfields, not just subfield 'a'.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
C4/Serials does not need to retrieve full item data
just to check if barcode is unique. Replace with
a lighter weight subroutine make code logic clearer and
cleaner
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch is a new script that delete suggestion that have be processed by librarians.
It take on argument, it's a number of days to keep suggestions. Suggestions olders than TODAY - $days will be deleted.
This script should be used to purge suggestions and clean the table in intranet.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds two sysprefs:
OpacFavicon
IntranetFavicon
The two sysprefs take full URLs to an alternate favicon.ico file for the OPAC
and Staff Client, respectively. Leaving them blank will use the favicon.ico file
that is included with Koha.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This prompts NFC normalization on adding record
Therefore, any saved record will be NFC normalized
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
On OPAC/staff result page facets are truncated to 20 characters. On some OPAC
layout, it's not enough. A new syspref FacetLabelTruncationLength defines the
length to cut facets if necessary.
This patch add the syspref to searching.pref and add it to syspref various
language default values loaded into DB during installation process. It's not
necessary to update DB since length is fixed to 20 (as before) when this
syspref isn't defined in systemprefercences table.
Rebased to last HEAD: 2011.03.18
[Documentation] FacetLabelTruncationLength syspref in Searching tab
[3.2] It doesn't apply.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Based on patch from Fridolyn Somers with input of Frederic Demians.
Added new Searching preference maxRecordsForFacets.
This pref contains number of result records used in facet building.
Also added pref displayFacetCount (with thanks to Frederic).
Follow up patch takes care of install issues; functionality can already be tested with this patch only.
Updated on March 17 for changes in include files.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch ensures that the OPAC library selection masthead will always default
to the branch that is currently being searched. This only applies to systems
with multiple branches and OpacAddMastheadLibraryPulldown turned on.
To test: do a search in the OPAC, limiting by branch. The search results will
still have that branch selected in the masthead dropdown.
This patch also fixes bug 5852 and bug 3778.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Liz Rea <lrea@nekls.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds a check for item-level_itypes system preference. Note that this only
applies to the search results screens.
To test:
1) Set item-level_itypes to 'specific item'
2) Create record and set 942$c to an itype that is marked not for loan
3) Create item with itype not marked 'not for loan'
Current behaviour: Holds link is not shown, sys pref setting doesn't matter
After patch: Holds link is shown
- when item-level_itype is 'specific item'
- when item-level_itype is 'biblio record' and 942$c itype is for loan
Holds link is not shown
- when item-level_itype is 'biblio record' and 942$c is not for loan
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch corrects a syntax error in the definition of bath attributes in
ccl.properties. In particular, it adds the search prefixes 'isbn', 'issn',
'name', and 'notes'. In order to make use of this patch, ccl.properties must be
updated.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- the systempreference is isbd, not ISBD
- when preparing the ItemRecord (for acq or serials recieving), there was no default value calculated for location. Fixing that
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Modification of template to allow multilanguage support. Alsa fixing columns
overflow.
BibLibre bug #5939
Tests: It works. Messages strings can now be extracted and placed in .po file
for translation.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The field was missing in Items.pm.
It will still act strangely if you enter a stocknumber that
already exists in the database. (see Bug 5860)
Adding/editing items with stocknumbers you have not used before
should work as expected.
[F. Demians] Was able to reproduce the bug on an UNIMARC DB. The patch works.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This fix ensures that searches will still work when -x is not used when
reindexing Zebra.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Magnus Enger <magnus@bibkat.no>
Signed-off-by: Jane Wagner <jwagner@ptfs.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
In Liz's second comment on this bug, she points out that local-only
holds (and also no-holds) items are being used to fill the first hold
in the queue, no matter where located, transitting if necessary. If
all the items on a biblio are set to no-holds types, this problem
would never arise, as no holds could be *placed*. But if you have
one or more unlimitedor local-hold items, then holds are getting
filled by the first item to cross a scanner, no matter what.
This patch will check during C4::Reserves::CheckReserves to make sure
that the hold being handed back to AddReturn is actually fillable by
the item just scanned. One caveat: If CircControl is set to "the library
you are logged in at", this will cause items checked in at
other-than-their-home-library to fill local holds at the library where
scanned. This is, however, an edge case!
Signed-off-by: Liz Rea <lrea@nekls.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When using XSLT mode, the OPAC results display will show "&" instead of "&"
when Zebra is indexing in XML mode. This patch works around this by replacing
"&" with "&" and then extends the previous fix to apply to all occurrences
of "& " instead of just the first.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds the syspref TraceCompleteSubfields. When TraceCompleteSubfields
is set to "force," clicking on links in non-authority controlled subject
tracings will only find other records where the entire subfields match. Leaving
it at "don't force" keeps the current behavior of doing a keyword search of the
subject indexes.
This patch implements complete-subfield subject tracings in MARC21 XSLTs (OPAC
and Staff) and all Normal mode interfaces. UNIMARC XSLTs have not been updated.
This patch also adds the syspref UseAuthoritiesForTracings. When set to "Do not"
tracings in the XSLT detail displays will never generate links using authority
numbers, but rather use the heading strings (NB: the tracings currently use only
subfield 'a' for generating links).
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Jane Wagner <jwagner@ptfs.com>
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When hidelostitems system preference is enabled, lost items are hidden on OPAC
detail page but are shown on result page. This patch modify MARC21/UNIMARC XSL
in order to take into account hidelostitems syspref on OPAC result page.
Signed-off-by: Liz Rea <lrea@nekls.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Restores ability to search on extended borrower attributes that are configured to be searchable
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Merge unfao changes to C4::Bookseller
Enable warnings in Bookseller.pm
Some cleanups in Bookseller code
Do not export everything by default
Display vendors more rationally
Was displaying by id make it name as the searchstring is for all
embedded substrings
Have removed "if mysql" logic as we want to deal with this by
abstracting the DB interaction and it makes cleaner code until then
Sponsered by UN FAO, Rome
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
