Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9a4e3bd49f)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 9e8657aba7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Koha::Object depends on Koha::DateUtils, which depends on C4::Context,
which depends on Koha::Config::SysPref, which depends on... Koha::Object
Apart from the circular dependency, the dependency on C4::Context alone
is problematic as it loads a bunch of modules that are not needed at all
in Koha::Object (YAML::XS and ZOOM for instance).
As Koha::Object is used as a base for a lot of modules, we should take
care to only load the minimum required.
This patch moves some date parsing code to specific modules:
- Koha::DateTime::Format::RFC3339
- Koha::DateTime::Format::SQL
and it uses them in Koha::Object and Koha::DateUtils where it is
possible.
Test plan:
1. Do not apply the patch yet and run the following command:
`perl -cw Koha/Object.pm`
It should print several warnings about redefined subroutines, meaning
there is a circular dependency.
2. Apply the patch
3. Run `perl -cw Koha/Object.pm`. It should only say:
"Koha/Object.pm syntax OK"
4. Run the following command:
prove \
t/DateUtils.t \
t/Koha/DateTime/Format/RFC3339.t \
t/db_dependent/Koha/Object.t
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8d5299639e)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit b0c862533d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Removing the manual transfer and rightaway doing the Reserve
transfer. One test description was misleading too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 7f22156b8f)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit dce78a0ecd)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
GetOtherReserves attempts to set the waiting/transit status for the next
hold on the list when applicable, but in practice it either leaves the
hold state unchanged, or sets the itemnumber without setting the found
status (erroneously converting bib-level holds to item-level holds).
The latter situation only occurs when the user has been prompted to
confirm, cancel, or revert the hold, and is able to ignore the prompt.
In those situations, the hold's state should not change.
GetOtherReserves does not need to change the hold state, and it does not
do so correctly. Besides that, it does not do much other than call
CheckReserves, and is only used in 3 places.
This patch removes GetOtherReserves, and refactors returns.pl and
C4::Reserves::ModReserveCancelAll to call CheckReserves directly instead.
To test:
1. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
2. Check in an item from that record to fill Patron A's hold
3. Set the hold's expiration date to yesterday by accessing the database
in the command line:
- In a ktd shell prompt, open the db client with koha-mysql kohadev
- UPDATE reserves
SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY)
WHERE borrowernumber = <Patron A's borrowernumber>
4. Go to Circulation > Holds Awaiting Pickup, and find the hold in the
"holds waiting past their expiration date" tab
5. Click the "Cancel hold" button in the Actions column next to the hold
(do not check in the book)
6. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
7. Cancel Patron B's hold
8. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
9. Check in an item to fill Patron A's hold
10. Repeat steps 3-5 to expire and cancel Patron A's hold
11. Return to the Holds tab of the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold, and there is no
"Revert transit status" button
12. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
13. Check in an item from that record to fill Patron A's hold
14. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
15. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
16. Click "Ignore" on the modal for Patron B's hold
17. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
18. Apply patch
19. Repeat steps 1-6
--> Note that Patron B's hold is still a bib-level/"next available" hold
20. Repeat steps 7-11
--> Note that Patron B's hold is still a bib-level/"next available" hold
21. Repeat steps 12-17
--> Note that Patron B's hold is still a bib-level/"next available" hold
Make sure correct behavior is unchanged:
22. Cancel Patron B's hold
23. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
24. Check in an item from that record to fill Patron A's hold
25. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
26. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
27. Click "Print slip, transfer, and confirm" on the modal for Patron B's hold
--> Confirm that the information on the slip is correct
--> Confirm that the hold is correctly put in transit
22. Set HoldsAutoFill and HoldsAutoFillPrintSlip to "Do"
23. Place a bib-level hold for the logged-in library
24. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
25. Place a bib-level hold for a different library
26. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly put in transit
27. Change the logged-in branch to match the hold pickup location
28. Check the item in
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
29. Repeat steps 22-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm that Patron B's hold is correctly put in transit
30. Cancel Patron B's hold
31. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
33. Repeat steps 24-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm Patron B's hold is correctly set to Waiting
34. Prove t/db_dependent/Circulation.t
35. Prove t/db_dependent/Koha/Holds.t
--> Tests pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit dc00e55a32)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 18884add71)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Apply this patch only
2. prove t/db_dependent/Koha/Holds.t
--> Tests pass
3. Apply the other patch
4. prove t/db_dependent/Koha/Holds.test
--> Tests still pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d71f527202)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit c4661a1660)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8f359aa72c)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 9659b8cddf)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
These tests highlight the fact that the 'place hold' button visibility in the
search results page **does not** match the 'place hold' button visibility in
the detail page, given the same conditions.
Since that this is a known behavior, these tests should be commented out as they
are failing by design.
prove t/db_dependent/selenium/opac_holds.t
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit f8665c8d55)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit badf7521ba)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Tests added to cover different use cases and combinations of circulation rules values for authenticated and unauthenticated users
At the moment, 2 tests are failing, documented on the [DO NOT PUSH] commit.
These 2 failing tests fail for the search results page but pass on the detail page counterpart. Ideally they should match, for consistency sake.
But this may be the use case "details page should be more correct, results page is always an approximation" mentioned by Nick.
More test combinations may be added in the future.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3758a8c05e)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 1af004161d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Before this patch we get all holds on a record and see if we can fill them with available items.
This means we check to fill holds that the item in questoion may not be able to fill, especially
in the case where no holds are allowed on the item type, this is wrong
To test:
1 - Find or create a biblio with two items of different item types
2 - Make sure one item type allows holds, and the other has:
"Default holds policy by item type"
Set to "No holds allowed"
3 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Don't allow"
4 - Check out the unholdable item to a patron
5 - Set a hold for a different patron on the next available item
6 - Confirm the checked out item can be renewed (don't renew, just view the checkouts page)
7 - Checkout the other item to a third patron
8 - Confirm the first item can still be renewed
9 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Allow"
10 - Confirm the item cannot be renewed now
11 - Apply patch, restart all
12 - Confirm the item can be renewed
13 - Set the item type to a type that allows holds
14 - Confirm the item can no longer be renewed
15 - Restore the item type
16 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Don't allow"
17 - Confirm the item can be renewed
18 - Check in the item from the third patron
19 - Confirm the item can still be renewed
20 - prove -v t/db_dependent/Circulation.t - test still pass
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9cc622be1f)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit ee235cd8d4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5f7a9db936)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f805c221cf)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds tests for the different cases of `BranchTransferLimitsType`.
It also adds tests for the situation of the consumer sending both limit
criterias on the request.
The controller gets adjusted for this new behavior and the spec gets
documentation added about this.
Bonus: tests are added the right guidelines code, and
BranchTransferLimitsType gets mocked to avoid failures due to existing
data.
To test:
1. Apply this patches
2. Run:
$ ktd --shell
k$ qa
=> SUCCESS: All green, and tests pass!
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fixed a typo in one of the return messages
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e846641edd)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f39baa0b98)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
rollback ineffective with AutoCommit enabled at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1651.
I have not investigated more than that. Reaching this was already the
end of a long road... (see comment 0)
Test plan:
0. Do not apply this patch
1. select count(*) from branches
Note the value
2. Run
prove t/db_dependent/FrameworkPlugin.t
=> There is a warning
3. Repeat 1.
=> There are too many libraries!
4. Apply the patch, retry 1, 2, 3
=> No warning, no library added by the tests
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 1d2165f841)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 789648aa4c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To prevent XSS
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 83db8696ca7a83aba224a0ab645f03447a96887b)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 383984a016)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Also tidy
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 42d388c80fcdd98c2594ad7b111b8e40c991388a)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit e413db6083)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 7a626d8d870039330889d6e48c3ae5ba848d85e9)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit fb1c48da9a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b315c0f2630ccd738fc811e13d1e95b11d3c8df1)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 11ea420b54)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Running cataloguing pluings (in cataloguing/value_builder) now requires
authentification.
This patch adds in failing unit tests a mock of C4::Auth::check_cookie_auth
Test with:
prove t/db_dependent/FrameworkPlugin.t t/db_dependent/Koha/UI/Form/Builder/Biblio.t t/db_dependent/Koha/UI/Form/Builder/Item.t t/db_dependent/Serials.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When submitting the form to create a new patron we are doing a POST
memberentry.pl that is redirecting to moremember.pl
The selenium test is expecting for the end of the request to test the
page's title against "Patron details for ".
But it's only waiting for the POST response (302), not the GET
moremember that will display the patron's details.
You can simulate a slow server using cpulimit: `cpulimit -b -p $PID -l 1`
replacing $PID with the pid of the starman process.
Note that other tests are failing using 1%, but... baby steps.
The current failre:
# Failed test at t/db_dependent/selenium/basic_workflow.t line 122
Wide character in print at /usr/share/perl/5.32/Test2/Formatter/TAP.pm line 125
# 'Add patron (test cat description) › Patrons › Koha'
# doesn't match '(?^u:Patron details for test_patron_surname)'
The next one (NOT fixed by this patch):
# Failed test at t/db_dependent/selenium/basic_workflow.t line 256.
# '
#
# Checkouts (0)# # '# doesn't match '(?^u:Checkouts \(1\))'
t/db_dependent/selenium/basic_workflow.t .. 14/22 # Failed test at t/db_dependent/selenium/basic_workflow.t line 256.
# '
#
# Checkouts (1)
#
# '
# doesn't match '(?^u:Checkouts \(2\))'
t/db_dependent/selenium/basic_workflow.t .. 16/22 # Failed test at t/db_dependent/selenium/basic_workflow.t line 256.
# '
#
# Checkouts (2)
#
# '
# doesn't match '(?^u:Checkouts \(3\))'
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4e166e07c1)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 5d73ff2da1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
Run t/db_dependent/api/v1/acquisitions_orders.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4032da3f96)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit e0f35d65e2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] As Victor discovered, the test with status new in subtest
'delete' needed the authorised user now.
Test plan:
Run t/db_dependent/api/v1/acquisitions_orders.t
Without the follow-up patch this should FAIL.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8bb61c4f88)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 1bc64dcef4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Working on bug 31791, I found myself wondering if our current recursive
code in C4::Auth::haspermission() would allow checking AND on
subpermissions.
As it is not documented in the POD or tested, I decided to write some
unit tests for it.
It turned out it was well supported, so I decided to submit the tests,
and a small tweak in the POD to reflect that.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Auth/haspermission.t
=> SUCCESS: Tests pass! The code supports AND on subpermissions!
3. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit aa1049fdd3)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 26ba5fba8b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
UT is failing in jenkins.
Change to use biblio.copyrightdate instead of bilio.medium
Run prove t/db_dependent/Items/AutomaticItemModificationByAge.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 2e6a2c3b5b)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit b0660d11f5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
In automatic item modifications by age missing,
conditions can be on columns of tables items or biblioitems.
Table biblio is missing.
Test plan :
1) Create an automatic item modifications by age with a condition on a column of biblio table
2) Create a record and item matching the rule
3) Run misc/cronjobs/automatic_item_modification_by_age.pl -c -v
=> Check only matching items are impacted
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Bug 32029: (follow-up) unit test
Signed-off-by: matthias le gac <matthias.le-gac@inlibro.com>
Bug 32029: (follow-up) tidy
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4e480d48f6)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit badba61f00)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit baa7c050d1)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 82fa40b618)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
And remove C4::Utils::DataTables, which should no longer be reused
anyway.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
(cherry picked from commit 4a65c417f8bfeefe9299981b415f3fbfca5cb5a4)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 47943a23a7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
t/db_dependent/selenium/administration_tasks.t ....... 3/3 Cannot show all entries from table //div[@id="libraries_wrapper"] at /kohadevbox/koha/t/lib/Selenium.pm line 247.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
(cherry picked from commit 204a840a4d71c677d49378588f4ed529cdc83fea)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit ad1c38b589)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9344f43170)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit c23838f24f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit ab7a8db43d)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 07a5a2ca59)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds the begginings of unit tests for Koha::EDI. Right now
we only test that a simple QUOTE message creates a basket, adds the item
to said basket and assigns that single item to a corresponding stock
rotation rota as defined by the LRP segment in the QUOTE message.
It lays the foundations for much more rigorous tests to be written to
cover the whole of EDI.pm however.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit de79e957ce)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 4bd1aca6a7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This unit test addition adds an LRP segment to the test EDI message file
and adds the corresponding test to confirm is it extracted into the
field as expected.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 6744b9979a)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 425bc1240b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds a Koha::Session module that makes it easier
to work with Koha sessions without needing the full C4::Auth module.
Test plan:
0. Apply the patch
1. Run the following unit tests:
prove ./t/db_dependent/Auth.t
prove ./t/db_dependent/Auth_with_cas.t
prove ./t/db_dependent/Koha/Session.t
2. Observe that they all pass
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 0e6537d199)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f927343a88)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch suggests to add a new flag do_not_print to
C4::Auth::checkauth to not print the headers and allow to test this
subroutine more easily.
We do no longer need to mock safe_exit and redirect STDOUT to test its
return values.
There are still 3 left:
1.
733 # checkauth will redirect and safe_exit if not authenticated and not authorized
=> Better to keep this one, not trivial to replace
2.
806 # This will fail on permissions
This should be replaced but testing $template->{VARS}->{nopermission}
fails, I dont' think the comment is better.
3.
828 # Patron does not have the borrowers permission
Same as 2.
2. and 3. should be investigated a bit more.
This patch also move duplicated code to set patron's password to a
subroutine set_weak_password.
Test plan:
Read the code and confirm that everything makes sense.
QA: Do you have a better way for this? Yes it's dirty!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Removing the CGI::Session behavior to auto-commit by mocking
SessionStorage makes that the $plugin->test_template does no
longer commit.
Since KitchenSink includes a CREATE TABLE, removing that code
removes the second implicit commit. We might move that code
to its own script?
Adds a missing rollback too at the end.
Test plan:
Run prove t/db_dependent/Koha/Plugins/Plugins.t
Verify that no records got added to plugin_data/methods table.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit dc62d9bed5)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit bfb2a929e3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
