This module is currently packaged by Debian for Wheezy and by
Ubuntu for Precise and Quantal.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch replaces an earlier patch by Marcel de Rooy, which
had become outdated because lots of new dependencies were
added since the patch was made.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
1) check perl syntax on file
$ perl -cw ./misc/migration_tools/koha-svc.pl
you should *not* get 'syntax OK' returned from command
2) apply patch, and install File::Slurp module
$ sudo cpanm File::Slurp
3) check perl syntax on file
$ perl -cw ./misc/migration_tools/koha-svc.pl
you should now get 'syntax OK' returned from command
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Without File:Slurp 1) complains of missing module,
with module then sintax Ok.
No errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Changed module from required to optional. The two files in which
it is used are extraneous from the viewpoint of the average user.
At the moment we cache numerous pieces of information in module-level
variables which then do not get updated in other threads/processes when
they are changed by the user. This is a serious usability issue.
Examples of this include the way we treat sysprefs (there is now a
method to disable the syspref cache, but by default it is enabled),
notices, frameworks, field mappings, and koha-conf.xml, at least.
This patch sets the stage for eliminating this problem by making it
possible to convert module-level cache variables into variables that
are actually backed by whatever caching system may be configured. This
is done through a special Koha::Cache::Object class which can be tied
to the variables that are being used for caching and provided with a
constructor method/closure to allow the cache to be reloaded when it
expires. For example:
my $cache = Koha::Cache->new();
my $data = 'whatever';
my $variable = Koha::Cache->create_scalar(
{
'key' => 'whatever',
'timeout' => 2,
'constructor' => sub { return $data; },
}
);
print "$$variable\n"; # Prints "whatever"
The one change this necessitates for accessing the data is that the
variable must be dereferenced an additional time before use (i.e.
$$variable instead of $variable). There is no difference when the
variable tied is a hash (created with Koha::Cache->create_hash). This
is a small price to pay for Koha working in a multi-threaded, persistent
environment. This change will also make caching easier in general.
CHI was incompatible with the variable tying, so this patch also removes
the dependency on CHI, using instead Cache::Memcached::Fast,
Cache::FastMmap, and Cache::Memory, when they are available.
To test:
1) Apply patch.
2) Run unit test t/Cache.t (after setting the MEMCACHED_SERVERS and
CACHING_SYSTEM environment variables). As no changes were made to
the tests already in that file, this passing demonstrates there
are no regressions.
3) With memcached caching enabled (you must set the MEMCACHED_SERVERS
and CACHING_SYSTEM environment variables) and DEBUG turned on (i.e.
the DEBUG environment variable set to 1), try running a report via
the web service ([intranet]/cgi-bin/koha/svc/report?id=1 and check
your web server logs to confirm that there are messages like
"get_from_cache for intranet:report:id:1" in them.
4) If the reports worked, sign off.
NOTE: Technically you could test this without needing memcached by
installing libcache-fastmmap-perl and setting CACHING_SYSTEM to
'fastmmap' instead of 'memcached'. You could also install libcache-perl
and set CACHING_SYSTEM to 'memory' but there would be little point as
the cached variables would go out of scope in between runs.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds support for custom plugins. At the moment the Plugins
feature supports two types of plugins, reports and tools.
Plugins are installed by uploading KPZ ( Koha Plugin Zip )
packages. A KPZ file is just a zip file containing the
perl files, template files, and any other files neccessary
to make the plugin work.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Create the directory /var/lib/koha/plugins
4) Add the lines
<pluginsdir>/var/lib/koha/plugins</pluginsdir>
<enable_plugins>1</enable_plugins>"
to your koha-conf.xml file
5) Add the line
Alias /plugin/ "/var/lib/koha/plugins/"
to your koha-httpd.conf file
6) Restart your webserver
7) Access the plugins system from the "More" pulldown
8) Upload the example plugin file provided here
9) Try it out!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
jcamins confirmed on IRC it is not optional.
To test:
1) perl koha_perl_deps.pl -a |grep String::Random
2) notice the "No" in the last column - it should be Yes
3) apply patch and repeat same steps, looking for Yes.
4) prove t/Installer_PerlModules.t # which checks String::Random is required
Sponsored-by: software.coop
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch use DataTable, see BUG|BZ 6836
- css/datatables.css
- lib/jquery/plugins/jquery.dataTables.min.js
- js/datatables.js
http://bugs.koha-community.org/show_bug.cgi?id=7167
Bug 7167 follow-up
Major changes:
* creating database tables for update on the fly, the 1st time the update script is called
* version is checked on mainpage.pl (and here only). If syspref Version differ from kohaversion.pl, the old updatedatabase is launched. If there are updates missing from new mechanism, the updatedatabase page is reached
* kohaversion check on each page is now useless in Auth.pm, removed dead code
* Updated installer: at the end of the process, retrieve all updates and automatically mark them "OK", as they're included in installer
Minor changes:
* adding copyright
* adding poddoc
* updating a warning, for better clarity
* switching from $$var to $var->
* small TT glitch fixed in updatedatabase.tt
* about.pl now returns the Version systempreference PLUS all the patches that have been applied
Bug 7167 follow-up perlcritic & numbers display & partial apply depending on DEBUG
* add use strict to updatedatabase, that is now perlcritic compliant
* partial apply of DB revs is now managed by DEBUG env variable = if DEBUG=0, the user can just apply every DBrev. If DEBUG=1, we're in a dev env, the user know has the option to apply DBrevs one by one
Display:
* in updatedatabase, small spelling changes
* in about.pl, remove 0 just after . (3.06.01 is displayed as 3.6.1)
* improve the display of applied numbers on about.pl
- before this patch, if you have N, N+1, N+2, N+3 and N+10 DB rev applied, about was displaying : , N+1 / N+2 / N+3 / N+10
- after this patch you have N......N+3 / N+10
* add ORDER BY into list_versions_already_knows to have number retrieved in the same order whatever the order they are applied
http://bugs.koha-community.org/show_bug.cgi?id=6679
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve the update.pl script
* Added CLI options to update.pl
* Call update.pl from the installer.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Now, we check versions on mainpage.pl and after login
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Reimplementing Marcel's suggestions & fixes
* Fixing the bugguy old version check (that was made against 3.0900000 instead of 3.0900027 -the last current kohaversion number
* in the CLI script, if there is nothing to report, just say it
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 7167: Remove check_coherency
As suggested by Katrin, we've removed the call to check_coherency. It intended to provide readable comments when some SQL was wrong. Removing this sub result in the SQL error being displayed. That's OK because the sysadmin or the developer can google the error, understand it, then fix it.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Changing in .sql parsing
We first split on delimiter and then extract comments. You can now put
\n for delimiter comments.
ex:
DELIMITER ;
-- this is a comment
SELECT * FROM my_table;
-- another comment
Before this patch, we had to write:
DELIMITER ;
-- this is a comment;
SELECT * FROM my_table;
-- another comment;
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Improve display + factorize get_queries
Despite it's size, this patch is dealing with display questions only:
* The text "comments" and "queries" was hardcoded in ajax-updatedb-getinfo.pl script. It has been replaced by a JSON call, returning 2 separate values, "comments:" and "queries:" is now in the template, making it translatable
* Some minor tweak in the display (like putting things in bold, displaying OK in green, warnings in yellow and KO in red)
* Reordering the column headers for more readability:
* Status column is merged with availability, column is after status
* Status/availability terms more clear: "Not applied" instead of "unknown", "Applied and OK", "Applied and failed", "Applied and forced" are the 3 other statuses
* Removed one click to display comments on DBREv not yet applied: before the patch, one had to click "Show details", then "Get comments", now, "Get comments" is enough
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX typos & moving a script to a proper place
* renamed availables to available
* renamed already_knows to already_applied
* fixed FSF & copyright headers
* removing a "use strict" because we already had use Modern::Perl
* fixed a tiny typo in about.tt
* moving update.pl to misc/bin because it's a CLI script
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add dependency File::Find::Rule
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: We want to execute non-numeric version with the -all option
Dealing with Marcel comment 100:
> Note that the current code around line 52/53 does not
> handle that correctly:
> Argument "\x{74}\x{65}..." isn't numeric in numeric ge (>=) at
> installer/data/mysql/update.pl line 52.
Now, a non-numeric DBRev will be applied if you provide the --all parameter, without throwing the error
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 reindentation & removing dead code
* The if (! defined $ENV{PERL5LIB}... block was wrongly intented
* The 3 lines running update.pl are useless: the update (new mechanism) is run from admin/updatedatabase.pl script. This part of install.pl is run only when you have "old style" DB revisions.
Summary:
* old mechanism = it's run as previously, by reaching the installer/install.pl?step=3 page, that applies all revisions
* new mechanism = when you log-in or reach mainpage.pl, you reach admin/updatedatabase.pl, where you can see what will be run, and run it
Tiny side effect = the check for old mechanism is now done *after* authentification (thus it's not done on each page call). It means that the user will have to enter login/password twice :
* first to log-in to Koha
* second to run installer/updatedatabase.pl?step=3
As the old mechanism is deprecated, we can expect this will happend only a few time in the history of a setup, it's not a big deal.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Don't raise an error in routine TableExists
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: FIX merge
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167: Add .pl and .sql examples
Those files are in version directory, so will never be executed by the updater
If you want to provide an update, do it in a 3.09/ directory (if your update is expected for 3.10 version)
Note that the updater use a md5sum checker. So, if the same update is in 2 different places, it will be detected. That will be handy for changes made on both stable and master: a library running stable will get the update when updating. When upgrading to the next major release, Koha will detect the patch has already been applied, and no error will be thrown. With the previous mechanism, a DBRev ported to stable was re-executed when upgrading to master, resulting in a nasty (but usually harmless) error message
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Bug 7167 follow-up fix POD syntax to please koha-qa.pl
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch fixes version number of String::Random as reported by
koha_perl_deps.pl
To test (on master)
1) run perl koha_perl_deps.pl -u, it will show as required String::Random version 1.4
2) apply the patch
3) run koha_perl_deps.pl -u, it will show (or not) as required String::Random version 0.22
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Patch works correctly according to the test plan.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test::MockModule and DBD::Mock are required for the unit tests in t/
to run. This is good, but means they should be required.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Koha::SearchEngine requires moose, but it wasn't declared as a
dependency.
Also update the debian/control dependencies to match the current state
of the requirements.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The test t/db_dependent/Koha.t uses Test::Deep to compare data
structures, but that dependency was not listed for the installer.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Current script check-url.pl checks URL found in 856$u by sending HTTP
requests, one by one. The next request can't be sent before the previous
one get a result, which can be very slow for dead URL. I propose a new
script which send multiple requests simultaneously which improve
drastically URL checking execution time.
This script is based on AnyEvent and AnyEvent::HTTP CPAN modules.
Add new dependencies AnyEvent & AnyEvent::HTTP.
See doc: perldoc check-url-quick.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
The fresh install of Debian, with the debian.koha-community.org
repository, only has version 1.20 by default. As only the most
basic functionality is being used, this version number should be
lowered from 1.26 to 1.20 in ./C4/Installer/PerlDependencies.pm
to make git installations cleaner.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Expression form of "eval" at line 71, column 9. See page 161 of PBP. (Severity: 5)
Expression form of "eval" at line 85, column 13. See page 161 of PBP. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds a unit test for C4::Search in t/db_dependent. In order
to test the functioning of the Zebra search, this patch actually includes
an entire Zebra sandbox, and pre-indexed files, which are stored in
t/db_dependent/data (the configuration files are generated on the fly).
This test depends on Test::Warn, Test::MockModule, and DBD::Mock.
To test:
1) Run the test. There should be no failures, and no warnings.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order for the awesome new t/ItemType.t test to work, we need
DBD::Mock.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Cache::Memcached::Fast is used for caching
Test::YAML::Valid is used for tests
Signed-off-by: Marc Veron <veron@veron.ch>
Dependencies appear as expected...
...and I see that they are not instaled yet on my server :-)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
HTML::FormatText is used by Template::Plugin::HtmlToText which is called in the template for opac-sendbasket.pl.
This is not a core Perl 5.10 module. I had to install it additionally on a test server. So I am adding it to PerlDependencies.
I just picked an old version 1.23 that I still could find as min_ver.
Changed the version information for Test::Strict too (not required, only for tests).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds new dependency Text::Unaccent to PerlDependencies.pm
Module is used currently to remove diacricits from automatically
created userid (<first name>.<surname>) in the patron module.
Test scenario:
1. open About Koha > Perl modules
2. verify that Text::Unaccent is there
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds t/db_dependent/00-strict.pl which tests that all Perl
scripts compile. I chose to use Test::Strict so that in the future we
can also have the test check that "use strict" and "use warnings" are
enabled.
To test:
1. Run t/db_dependent/00-strict.pl.
2. Run around waving your arms in the air that we have a couple of
scripts that don't compile.
3. Actually, that's about it. You could test my patch for bug 8384 next.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Moved test to t/db_dependent
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This removes the dependency on Date::ICal (which is largely
unmaintained) and replaces it with DateTime::Format::ICal which can do
the same job. It also updates all the docs and installation scripts to
handle this change.
Note that this causes a minor behaviour change: previously the generated
times were converted to UTC, now they are left "floating" (that is, have
no timezone attached) and so will appear as the local time when imported
into a calendar. I don't anticipate this'll cause any issues however.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Removes HTML::Template::Pro as a requirement (since we're now on Template::Toolkit).
To test:
On a system without, HTML::Template::Pro installed, run perl koha_perl_deps.pl -m -u
Shouldn't return anything about HTML::Template::Pro
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This CPAN module is needed for the ShowReviewerPhoto functionality.
Unfortunately the version in Squeeze (1.02) is not sufficient so it
has to be installed from CPAN:
sudo apt-get install libnet-dns-perl libtest-warn-perl
sudo cpan Gravatar::URL
Signed-off-by: Francois Marier <francois@debian.org>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch lowers the dependency on the "Storable" Perl package
(also known as module/distribution) from version 2.21 to 2.20
This patch created today (14-Apr-2011) does, in PerlDependencies.pm,
the same as a previous patch dated 30-Mar-2010 from Lars Wirzenius
did, in Makefile.PL :
[Koha-patches] [PATCH] Lower dependency on Storable to 2.20.
http://lists.koha-community.org/pipermail/koha-patches/2010-March/011560.html
The reason for this patch is the same that Lars gave for his:
" The Debian squeeze system has only 2.20, and the 2.21 does not seem
to be required for all tests to pass. Also, checked with
Galen Charlton and Henri-Damien LAURENT (who added the 2.21 dependency)
on IRC that 2.21 did not have anything that was required, compared
to 2.20. "
I believe this patch should be applied to the "master" branch
and should also be "cherry-picked" for the "3.2.x" branch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The way Koha get book cover from Amazon doesn't work from biblio records
having ISBN13 because Amazon expect an ISBN10. This patch transforms
ISBN13 into ISBN10 before sending it to Amazon.
Warning! On some devel installations, you will have to install by hand a
new CPAN depency:
Business::ISBN
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Calls to VERSION were generating errors when called on a string.
Use a bit of sleight of hand to avoid this
Added a couple of tests on Installer/PerlModules
Module needs better coverage testing (esp on newer perls)
Sorted to list of modules to make koha_perl_deps.pl more
human-friendly
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
The canonical list of Perl module dependencies are in
C4::Installer::PerlDependencies::PERL_DEPS now. Add a script
(debian/list-deps) to turn that into a list of Debian package names.
Because that is a slow process, and the output rarely changes, do
not do that at build time. Also, doing it at build time would require
modifying debian/control in evil ways.
Instead, add another tool, debian/update-control, which reads the
new file debian/control.in, and adds the output of debian/list-deps to
Build-Depends and creates a new debian/control.
debian/control.in is the master file. If changes are needed, that should
be edited. For performance and convenience reasons, the output is also kept
in git, but don't edit debian/control directly, please. Such changes
might get lost by the next commit by someone else.
Whenever PERL_DEPS changes, debian/update-control should be run as well
and the result committed to git.
This is not quite as automatic as it might be, but should be good enough.
It avoids keeping the list of Perl modules in two places.
Note that since it seems impossible to automatically figure out the Debian
package version that corresponds to a Perl module version, I have not
tried to do that at all.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This brings the required version into line with the latest version available in the Debian and Ubuntu repos.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This patch adds two modules: C4::Installer::PerlModule and C4::Installer::PerlDependencies. The latter provides a single point
of reference for cataloging Koha Perl dependencies. The former provides an OO style interface to the dependency catalog.
The format of C4::Installer::PerlDependencies is very simply an anonymous hash of hashes. Each second level hash takes this form:
'Foo::Bar' => {
'usage' => 'FooBar Feature',
'required' => '1', # 0 if optional
'min_ver' => '0.01',
},
New modules can be appended to C4::Installer::PerlDependencies as needed and will be picked up by every piece of code which needs
this information.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
