Based on Mark's inputs in comment #40 -
[1] selected 'mast' (short of 'masthead') and updated :
(a) bug_14252-OpacLangSelectorMode_syspref.sql
(b) sysprefs.sql
(c) opac.pref
[2] Reduced the calls to Koha.Preference() from :
(a) masthead.inc
(b) opac-bottom.inc
After applying this patch, update the database once for it to pick
up the new option values -'both|mast|foot'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Based on discussion, this followup does the following:
1/ brings back the switcher on opac-bottom.inc
2/ adds a syspref OpacLangSelectorMode to toggle between the three
modes:
(a) show switcher both on masthead and footer (default)
(b) footer only
(b) masthead only
Test plan
=========
1/ apply earlier patches attached to this bug in their correct order
2/ apply this followup patch
3/ run updatedatabase.pl to add in the atomic update
4/ goto admin/preferences.pl?tab=opac
5/ look up OpacLangSelectorMode, it should be set with default value
"both masthead and footer"
6/ check OPAC to see if both locations show the selectors
7/ change OpacLangSelectorMode to 'only header' and 'only footer' at
each iteration, and check if the selection has correctly toggled
the selectors. It should
Note: make sure you do not have the patch 11057 applied on the branch
from before, otherwise merge conflict might happen.
http://bugs.koha-community.org/show_bug.cgi?id=14252
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Since message_id is not linked to anything else in the database, we
can ensure the message_id's are unique by simply dropping the column
and recreating it.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Making message_queue work nicely with DBIx.
DROP the existing KEY and replace with an PRIMARY KEY.
If somebody has managed to get duplicate message_ids in his/her
message_queue-table, this patch takes care of them as well, but givin
all duplicate message_id's a new id.
TEST INSTRUCTIONS: in the patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Amended patch: Remove change to Koha/Schema/Result/MessageQueue.pm, will
be done by the RM
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Improves formatting and wording as suggested by
Nicole on bug 14249.
To test:
- Activate UseDischarge
- Request a discharge from a patron account in the OPAC
- Confirm discharge from the start page of the staff
interface
- Download PDF from the patron account in the OPAC
- Verify the displayed text is formatted and reads
correctly
06/06/2015 15:18
Discharge confirmation
Midway certifies that the following borrower:
Firstname surname (cardnumber: 1)
has returned all items.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Messages is Ok, no errors
I think you cant modify message using embeded CSS,
html -> pdf procedure ignores CSS.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
TEST PLAN
---------
1) backup db
2) git checkout -b my_3.6.x origin/3.6.x
3) drop db and create blank one
4) git reset --hard origin/3.6.x
5) run web installer
6) set HomeorHoldingBranchReturn system preference to 'holdingbranch'.
7) create a Default checkout, hold rule
home -> koha administration -> Circulation and fines rules
-- I put 10 checkouts total and clicked 'Save'
-- there currently is not 'returnbranch' in default_circ_rules.
8) git reset --hard origin/3.20.x
-- or whatever version you apply this to
(3.8.x, 3.10.x, 3.14.x, 3.16.x, 3.18.x, or 3.20.x
-- 3.21.00.008 deletes the systempreference involved)
9) ./installer/data/mysql/updatedatabase.pl
10) check HomeorHoldingBranchReturn systempreference
-- Currently says 'holdingbranch', but
the value of 'returnbranch' in default_circ_rules is
'homebranch'.
11) repeat steps 3-8
12) apply this patch
13) repeat steps 9-10
-- Currently says 'holdingbranch', and
the value of 'returnbranch' in default_circ_rules is
'holdingbranch'.
14) run koha qa test tools
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using 3.6.x install, updated to 3.8.x
Value is preserved
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Note: I haven't followed the test plan, but the fix is trivial.
Maybe it could worth to upate 3.21.00.008 and check the value of
HomeOrHoldingBranchReturn before deleting it.
We could raise a warning if HomeOrHoldingBranchReturn ==
'holdingbranch'.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Removes the Smithsonian as a target installed with the
sample data during installation.
Also adds the newer LOC authority targets to files where
they were missing.
To test:
- Verify the Smithsonian has been removed from all
translated installers
- Verify the files are still valid SQL and install
correctly
NOTE: There was tiny scope creep which included ensuring
there were two Authority z39.50 servers as well.
Text files properly reflect the removal.
SQL 'source' of SQL files worked properly.
Was able to Z39.50 search for all of the 'en'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Added Atomic Update to fix poorly transferred orders
TEST PLAN
---------
8) Apply patch (2)
9) Run the database updates
$ ./installer/data/mysql/updatedatabase.pl
-- This should run without error
10) prove -v t/db_dependent/Acquisition/TransferOrder.t
-- This should fail, because the transfer function is still
not fixed.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Reported by Jonathan on bug 11401:
DROP TABLE IF EXISTS borrower_sync;
is missing in installer/data/mysql/kohastructure.sql
To test:
- Run the web installer and confirm all tables are
created correctly
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- Fix updatedatabase, moving the update entry into the right spot
- Fix some tabs
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch removes HomeOrHoldingBranchReturn syspref and makes circ/returns.pl respect branch
circulation rules from C4::Circulation::GetBranchItemRule. Also transfer slip notice should reflect this.
Default should always be to return item to home branch.
Test plan:
- make sure syspref 'AutomaticItemReturn' is set to 'false'
- unset 'Default checkout, hold and return policy' or set 'Return policy' to 'Item returns home'
- checkout an item and do a checkin from different branch than items homebranch
- verify that you're prompted with a transfer message to item's home branch and that print slip matches
- set 'Return policy' to 'Item returns to issuing library'
- do a checkout and a checkin from branch different than item's home branch
- verify that you're not prompted with a transfer message and that holding library is your current branch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Follow-up:
- Added 3 tests in t/db_dependent/Circulation_Branches.t to test AddReturn
policies
- Removed HomeOrHoldingBranchReturn from sysprefs.sql
- Added notice on removing syspref in updatedatabase
QA edits:
- removed trailing whitespace in tests
- moved branchname lookup from returns.pl to template
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Acquisition db tables are missing some indexes to have
performance queries.
This patch adds an index on some columns very often
used in search queries, such as aqbooksellers.name and
aqbudgets.budget_code.
Also adds an index on aqorders.orderstatus, very often used
with hardcoded value like 'cancelled', in various queries.
Test plan :
1) Back up database
2) $ git reset --hard origin/master
3) $ git bz apply 14053
4) In your mysql client
> DROP DATABASE koha_library;
> CREATE DATABASE koha_library;
> QUIT;
-- Obviously you may need to vary koha_library :)
5) Navigate to staff client
-- should be able to set up the DB just fine.
-- this will catch the comma bug that keeps coming in.
6) $ git reset --hard origin/master
7) Repeat step 4
8) Navigate to staff client
-- nothing tested, but we need the DB set up.
9) $ ./installer/data/mysql/updatedatabase.pl
-- atomic updates run without issue.
10) run koha qa test tools
11) Restore DB
12) Try to compare performance after and before
database update. I think query contained in
C4::Acquistion::GetInvoices could be a good example
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The borrowers.flags values need to be updated to prevent side effects.
Test plan:
Set the borrow permission flags for some borrowers
Execute the updatedb entry and verify the flags has been updated (-128)
only for borrowers with this permission set.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Moved updatedatabase entry (was in wrong position) to atomicupdate
with commented copy of orignal
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The borrow permission was used but uselessly.
For instance, at the opac, the flagsrequired parameter was set to
'borrow' but the 'authnotrequired' was set also (which means no auth
required).
At the end, this permission was used at only 1 place: for the basket,
intranet side.
This can be replaced with the catalogue permission (which is used to
search).
Test plan:
1/ Confirm that you are able to show/download/sent the cart (intranet side)
with the catalogue permission.
2/ At the OPAC, you should be able to access the same pages as before
with any other permissions.
Concretely it is quite difficult to test this patch, you should have a
look at the code.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch sets adds the possibility to log new, update and delete actions for saved reports.
To test:
-Apply patch
-Run updatedatabase.pl
-Enable system preference ReportsLog
-Create, duplicate, edit and delete saved reports
-Go to Home > Tools > Logs
-Verify that you can select "Reports" in Modules list
-Verify that your actions were logged
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch renames translation files for Bengali
language, from ben-* to bn-IN-*.
Also adds India as region
To test:
1) Apply the patch
2) Run updatedatabase
3) Install Bengali language
cd misc/translator
perl translate install bn-IN
enable
Check correct description
4) Create and install a fake Bengali variant
cd misc/translator
perl translate create bn-XX
perl translate install bn-XX
enable both variants
Check correct rendering of region
Results comply with expected test plan outcome. Signed off for bn-IN
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Same as previous patch for opacuserjs
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Worked before and after updatedatabase.pl, though after
is less confusing to the programmer unaware of case-insensitivity.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To match IntranetUserCSS, intranetuserjs should be renamed
IntranetUserJS.
Test plan:
1/ Be sure there is no occurrence of intranetuserjs
2/ Confirm the pref still works as before
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Worked before and after updatedatabase.pl, though after
is less confusing to the person unaware of case insensitivity.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- translates new notice ACQ_NOTIF_ON_RECEIV
- translates new permissions
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested German install till "Gratulation, die Installation ist abgeschlossen"
No errors
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Same results noted as above.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested installation, checked new translations in Koha and deleted an extra
space in the ACQ_NOTIF_ON_RECEIV notice
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In order not to have useless entries in the auth_subfield_structure
table, this patch modifies the DB structure to add a foreign key on the
authtypecode column.
Note that the auth_tag_structure already has this constraint.
Test plan:
0/ Don't apply this patch
1/ Create a now authority type 'RM_ME'
2/ Look at the MARC structure, to create the subfield structure and
populate the auth_subfield_structure table.
3/ Delete the authority type
4/ Using your SQL cli:
SELECT COUNT(*) FROM auth_subfield_structure WHERE authtypecode='RM_ME';
=> The data are still in this table.
5/ Apply this patch
6/ Execute the updatedb entry
7/ Confirm the entries in the auth_subfield_structure table related to
RM_ME have been deleted
8/ Repeat 1, 2 and 3 and verify the auth_subfield_structure entries have
been correctly removed.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
- Works exactly as described in the (very good) test plan.
- After authority type deletion, auth_subfield_structure still contains
entries for deleted authority type. Applying the patch clean the
previously undeleted records in auth_subfield_strucute. Now deleting a
authority type cleans propertly all appropriate records in
auth_subfield_structure.
- Fix a merge conflict
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Sorry but removed backticks
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Suggestions table is missing some indexes.
Index on biblionumber will speed up C4::Suggestions::GetSuggestionInfoFromBiblionumber(), often called in a loop.
Index on status and branchcode will speed up many queries.
Note that an index on budgetid is automatically added by the creation of the foreign key constraint.
Test plan :
- Check performance with an invoice containing a lot of orders.
- Check suggestions pages are faster or at least not slower.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This column was not used in the Koha codebase, it can be removed.
Test plan:
Execute the updatedatabase.pl script and confirm that the column has
been dropped.
QA step:
1/ git grep totalamount
2/ prove t/db_dependent/Acquisition.t
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It will permit not to run another perl interpreter.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds DISCHARGE sample message to de-DE sample_notices.pl
(in GErman wording)
To test:
1) prove xt/sample_notices.t, it fails
2) apply the patch
3) prove again, this time no errors
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Right wording :)
Fixed version
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds DISCHARGE sample message to de-DE sample_notices.pl
To test:
1) prove xt/sample_notices.t, it fails
2) apply the patch
3) prove again, this time no errors
As original Bug 8007 sample message this is not translated,
so a German counter patch is welcome.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
As noted, a German counter patch is preferred. :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
