This patch removes all (2) instances from koha2marclinks.pl.
Also changes dropdowns width on mapping editor, from an
ugly ragged right to a fixed width view.
To test:
1. Apply the patch
2. Go to Administration > Koha to MARC mapping
3. Pulldown in this view has been replaced, check
for regressions: change table type and press Ok,
verify you get Koha fields and tag/subfield appropriate
for each table.
4. Now press 'Edit' on any field, go into mapping editor
5. Check that all pulldowns show tag/subtags relevant
for each group ( 000s ... 900s )
6. Check that current mapping is displayed correctly
7. Check for regressions: unmap, remap, press Ok,
verify, change again.
8. If you can, check display of mapping editor on several
browsers, just in case.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I have tested with Firefox/Iceweasel only.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested in Chromium.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes all instances on this file. Even removes some commented out instances.
Also re-enable editor feature to show/change kohafield value, can't find when or why it was removed.
Up to QA or RM for consideration, simply to remove.
But is strange to have a non editable field on auth frameworks.
To test:
1. Apply the patch
2. Go to Administration > Authority types
3. Clic MARC structure of any auth fw
4. Clic subfield on any tag, e.g. 031
5. Clic 'Edit subfields' button
Now the tests proper
6. 'Help input' box (editor bottom):
Eight(8) scrolling_list removed, they use to
feed the four pulldowns, so check each one
'Koha field' is new (for me at last)
'Authorised value',
'Thesaurus' (is this valid/useful here?)
'Plugin'
There is a difference between existing subtags and a new subtag,
the 'id' of the pulldowns (so the 8 scrolling list removed)
Check assign/remove/save/load values, search for regressions
If you edit subtag 942, it has a value on kohafield (default fw)
I think that this box could be prettified with fixed width for
pulldowns.
7. No more functional tests, there are 4 scrolling_list removed
that are commented (removed also commented code on tt file),
and two instances that are similar to previously removed
instances, evidently with no effect.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Not sure about the new Koha field entry... All works as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All works as expected.
About Koha field: I think it makes sense to have it in the form,
so you can configure the fields for new authority types.
In my database I have mappings on authtypecode and authid.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11679 introduces an ods export for reports.
It looks quite buggy:
1/ You get a Perl error if the report has no results
2/ The ods file contains 1 lines less than the total results.
Test plan:
After applying this patch, try to export a report which has no results
and verify you get an ods file with headers only.
Try to export a report which has a least 1 result and verify the
generated ods has the right number of lines.
Signed-off-by: Robert Higgins <robert.higgins@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes the reported problem, passes all tests and QA script.
Added the sign-off line for Robert.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
SMS.t should not dependent on the DB.
Test plan:
verify that prove t/SMS.t returns green even if the DB is not there.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Turned off MySQL, tests still pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This followup replaces $params with %$params in keys function
It also fixes some wording
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch
- refactors C4::Stats::UpdateStats (it now takes a hashref as unique parameter, instead of a list of parameters)
- add UT for it
- change the calls made to this sub in C4::Accounts and C4::Circulation
Additionnaly it also
- adds POD to C4::Stats::TotalPaid
- adds some comments to C4::Stats::TotalPaid (I think I found some errors in it)
To test :
1. run "prove t/db_dependant/Stats.t -v"
2. make some circulation operations (checkout, checkin, renew, localuse)
check the operations are rightly recorded in Statistics table (with a SQL query like "SELECT * FROM statistics WHERE datetime LIKE "2013-11-15%", if you run your test on the 15th november)
3. make some fine payments operations (writeoff, payment)
check the operations are rightly recorded in Statistics table (with a SQL query like "SELECT * FROM statistics WHERE datetime LIKE "2013-11-15%", if you run your test on the 15th november)
Note that there is probably an issue to fix in Accounts.pm : the user is saved instead of the branch. But this is not the purpose of this patch, so I kept the previous behavior for the moment.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work, test pass, isse/return/writeoff recorded on statistics
Removed a "=back" to make happy koha-qa
No other errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Cancel replacing carriage return with <br /> in printed html file as <br /> is needed in model for email notices when html format is checked
Test plan :
* define an OVERDUE notice with html activated, with <br /> at each end of line
* make sur you've got some borrowers with overdues meeting your notices triggering rules (some with valid email and others without)
* run overdue_notices.pl -html to generate html files for borrowers without email
Without patch
* email notifications are correctly formated as html content, with one <br /> at each end of line
* in html file, <br /> is duplicated at each end of line
With patch
* nothing changes for email notification
* html file is correctly formatted with only one <br /> at each end of line
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Copied test plan from comment.
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We should reserve the use of dirs for namespaces. Method specific tests
should be included in a single file with subtests, or stick to Package_method.t.
This should be discussed, so we rearrange the remaining tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
DelItem should return 1 if the item has been deleted, otherwise 0.
Test plan:
Verify that t/db_dependent/Items/DelItem.t returns green
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To delete an item, only the itemnumber should be mandatory. The DelItem
routine can retrieve the biblionumber from the itemnumber.
Test plan:
Verify that t/db_dependent/Items/DelItem.t passes
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since C4::Context->dbh shares the DB handler, it's useless to pass it to
routines.
Test plan:
Try to remove an item from the Koha interface.
Verify that unit tests pass.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
An "onclick" attribute on inventory results links causes the page to
scroll to the top each time. This patch updates the click handling to
use a progressive-enhancement method.
Unrelated changes: I added use of the Branches T:T plugin to output
library name instead of branchcode, and put a check around call number
to prevent output of empty [] in results.
To test, use the inventory tool to check a batch of items. On the
results page:
- Confirm that branch name is shown instead of code.
- Confirm that no [] shows for items without call numbers
- Confirm that clicking a title opens a pop-up window showing details
for that title.
- Confirm that clicking a title opens a pop-up window whether you're on
the first page of results or any subsequent page.
Signed-off-by: Ian Beardslee <ian@catalyst.net.nz>
Tested in Firefox and Chromium.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes the style of a couple of message boxes to use the
"message" style instead of the "alert" style. This better reflects the
type and priority of the messages being displayed.
To test, got to Administration -> Z39.50 client targets and edit an
existing server. The confirmation message should be the blue "message"
type.
Test again by adding a new server. The confirmation message for this
operation should be of the same blue "message" type.
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, tested ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The notice edit view has separate sections for each of the various
message transport types. This patch groups them in a jQueryUI accordion
to simplify the view.
Also changed: Some label/id pairs have been changed to eliminate
duplicate ids.
To test, apply the patch an edit any notice under Tools -> Notices &
Slips.
- The message transport type fields for email, feed, phone, etc. should
be correctly grouped in a collapsed accordion. The acccordion should
look correct and work correctly.
- Clicking the label for any form field should correctly highlight the
corresponding field.
- Submitting updates to the notice should work correctly for all message
transport types.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described.
Something small: the top border of the uncollapsed/opened section
doesn't display correctly, but this is working a lot nicer than before,
as now changing a message requires a lot less scrolling.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When using the backdating of returns feature, an item that is not
overdue is treated as being as many days overdue as it is *not* overdue.
This is due to the fact that _get_chargeable_units appears to return the
difference between the return date and the due date without
consideration the return date being earlier than the due date.
Test Plan:
1) Apply the unit test patch
2) prove t/db_dependent/Circulation.t
3) Note the failure
4) Apply the second patch
5) prove t/db_dependent/Circulation.t
6) Note there are no failures
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fixes some badly named variables also
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
In order to test this, you need to activate SpecifyReturnDate.
I confirmed the problem and verified that the bug fixes it
by running the tests, but also by testing in staff.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As of http://perldoc.perl.org/functions/keys.html we should avoid passing
a scalar parameter as it is not backwards compatible with squeezze's Perl
version (5.10).
Cite:
"Starting with Perl 5.14, keys can take a scalar EXPR, which must contain a
reference to an unblessed hash or array. The argument will be dereferenced
automatically. This aspect of keys is considered highly experimental. The
exact behaviour may change in a future version of Perl."
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the funds are not moved, the amount is display like 123.000000.
This patch hardcodes the number of decimal numbers to display (2).
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests, especially all acquisition tests.
New routines in Budgets.pm:
- CloneBudgetPeriod
- CloneBudgetHierarchy
- MoveOrders
OK t/db_dependent/Budgets.t
Some of the tests done:
1) Duplicate an existing budget
- OK Existing budget is active, duplicate it and mark it inactive
- OK Existing budget is inactive, duplicate and mark it inactive
2) Close budget
- OK Budget was created without funds - no changes are made
- OK Budget was created with funds, all orders moved correctly
- moving the available money to the new budget is optional
- OK Budget was created with funds, but one fund deleted,
all orders moved correctly, one missing fund reported,
orders unchanged
3) Partial receiced undone
- OK Partial receive from last budget is undone, order lines
are correctly recombined and fund is set to the current budget
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up fixes issues raised on bug 12164 comment 17.
1/ The unreceived orders columns should only display "pending" orders
2/ Fix some typo from_budget_period_id vs budget_period_id vs
to_budget_period_id
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On closing a budget (budget period), the user will be presented with an
option to move remaining unspent funds from the previous budget to the
newly created one - adding to the amounts already entered in those
funds.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is the main patch.
On closing a budget period, all unreceived orders are moved from the
old/previous fiscal year into the new fiscal year.
You can rollover funds unused in the previous fiscal year to the new
fiscal year.
This patch set is based on bug 12168 (bugfix) and can be tested on top
of bug 11578 (easier to see the fund structure).
The patch set is cut in 6 main patches:
- Move the budget period clone logic into C4::Budgets
The code is moved from the pl to Budgets.pm and unit tests are provided.
The original code should certainly be buggy since a typo existed.
- On cloning budget period, mark original budget as inactive
Cloning a budget period is already possible in Koha, this patch adds a
checkbox to mark as inactive the original budget. That avoids to edit
the budget and click the "inactive" checkbox. Both do the same action.
- On cloning budget periods, add a "reset all funds" option
Same as before, a new checkbox is added on cloning a budget period. If
you check it, all fund amounts will be set to 0. Otherwise, no change
compared to the existing behavior.
- Close a budget period (budget)
The goal of this patch set is to move unreceived orders from a budget to
another. This patch adds a C4::Budgets::MoveOrders routine which does
this job.
This action is only possible if the fund structure is the same for both
budgets, the budget_code field should be the same.
- On closing budget period, move unspent amount
Unspent amount will be move from the previous budget structure to the
new one.
- Add UI report
This patch only adds a report when closing a budget is done.
Test plan:
Wording: below, budget is a "budget period" and fund is a "budget".
Prerequisite: Having 1 active budget with some funds (with different
levels and different amounts). Order and receive some orders (not all).
1/ Go on the budgets administration page (admin/aqbudgetperiods.pl) and
duplicate the structure of this budget ("Duplicate" link in the
"Actions" column).
2/ Enter start and end date for this budget and mark the original budget
as inactive.
3/ Note that a new budget is created, with the same fund structures (and
same value) and that the old one is marked as inactive (see
admin/aqbudgets.pl page with patches from bug 11578).
4/ Try to close the new budget: it is not possible, there is no
unreceived orders for this budget.
5/ You can close the inactive budget ("Close" link in the "Actions"
column).
6/ Verify the number of "Unreceived orders" is correct and select the
new budget in the budget list. Click on the "Move remaining unspent
funds" if you want to move unspent amounts.
7/ A report view is displayed and show you the ordernumber which have
been impacted (grouped by fund).
8/ Try different configuration, depending on the selected checkboxes.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox "reset all funds" (budgets).
If it is checked, the new created budgets (funds) will be reset.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox "mark original budget as inactive" (budget
period).
If it is checked, the original budget will be marked as inactive.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Note the typo InsertInTable "aqcudgets", note sure about the existing
behavior before this patch!
This patch adds a link "Duplicate" in the action list for budget
periods (budgets).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The opacsmallimage system preference is unused in the bootstrap theme.
It can be removed now that prog and ccsr are deprecated. This patch does
so.
To test, apply the patch and run updatedatabase. Confirm that the OPAC
works properly and the preference can no longer be found.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch changes the OPAC list download process so that the download
link triggers a modal dialog instead of a pop-up window. This
streamlines the process a little bit and makes it work better on mobile
devices.
The download list page has been altered so that it works better as a
standalone page, as it might be seen if JavaScript is disabled. Simple
form validation has been added to help prevent submission of the form
without choosing a format.
To test the virtualshelves system preference must be enabled.
- View an existing list in the OPAC and click the "download list" link.
- A modal dialog should be displayed with the download form.
- Submitting the form without selecting a format should trigger either a
browser-based form validation error (in HTML5-supporting browsers) or
a JavaScript alert (if your browser doesn't support the "required"
attribute.
- Choosing a download format and submitting the form should close
the dialog and trigger the correct download.
- Clicking the "Cancel" link should close the dialog.
Test with JavaScript disabled:
- Clicking the "download list" link should take you to a page which
contains the same form which appeared in the modal dialog.
- Submitting the form without selecting a format should trigger either a
browser-based form validation error (in HTML5-supporting browsers) or
a JavaScript alert (if your browser doesn't support the "required"
attribute..
- Choosing a download format and submitting the form should result in
the corect download.
- Clicking the "Cancel" link should return you to the correct list.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests, works as described.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Before bug 9811, if you searched for "John Doe" and only 1 patron with
this firstname/surname existed, the patron detail page was displayed.
Now the result lists all patrons with ( firstname=john or doe ) or (
surname=john or doe). Which is quite annoying when you expect only 1
result.
Test plan:
0/ Create some patrons like: "John Doe", "Jane Doe", "John Smith".
1/ Search for "John Doe" in the patron search box
2/ Verify you got 2 results
3/ Apply the patch
4/ Search for "John Doe" in the patron search box
5/ Verify you are redirected to the right patron detail page.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Differences between circ-menu.tt and circ-menu.inc always crop up when a
new menu item is added--usually only to circ-menu.inc as happened with
Bug 9261.
Other sidebar differences are present due to differences in the patron
data passed by various patron-related script to their templates. This
patch also irons out some of these inconsistencies.
To test, apply the patch and check out to a patron whose record has more
than just basic data: othername, country, patron attributes, street
number, road types, etc. View the following pages and compare the patron
data and visible tabs to confirm that they match:
circ/circulation.pl?borrowernumber=X
members/boraccount.pl?borrowernumber=X
members/files.pl?borrowernumber=X
members/mancredit.pl?borrowernumber=X
members/maninvoice.pl?borrowernumber=X
members/member-flags.pl?member=X
members/member-password.pl?member=X
members/moremember.pl?borrowernumber=X
members/notices.pl?borrowernumber=X
members/pay.pl?borrowernumber=X
members/paycollect.pl?borrowernumber=X
members/purchase-suggestions.pl?borrowernumber=X
members/readingrec.pl?borrowernumber=X
members/routing-lists.pl?borrowernumber=X
members/statistics.pl?borrowernumber=X
tools/viewlog.pl?do_it=1&modules=MEMBERS&modules=circulation&src=circ&object=X
The only difference I've found which is not fixed by this patch is the
display of extended patron attributes in the sidebar of moremember.pl.
This is a piecemeal fix for a problem which really deserves a
centralized solution, but at least it gets us back to consistency for
the moment.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Going through all tabs shows consistency is back. A mid term solution should
implement this in a centralized way. Great job Owen!
No koha-qa errors btw.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a record contains a (one or more) local cover image and it is deleted, a wrong message is presented in the UI.
To reproduce:
- Have LocalCoverImages set to "Display" and AllowMultipleCovers set to "Allow".
- Go to the detail page of a record that has no images attached.
- The 'Images' tab conveniently shows the following message:
"No images have been uploaded..."
- Use the "upload" link to add a local cover to the record
- Complete the process, and "view final record".
- The 'Images' tab shows the added cover.
- Delete the cover image using the link below the cover.
=> FAIL: 'Click on an image...' message still shows instead of 'No images have been...'
To test:
- Apply the patch
- Repeat the previous steps
=> SUCCESS : 'No images have been...'
Bonus points: previous code didn't show a message at all if the user didn't have
permissions to upload local cover images. I've split the message in two:
- 'No images have been...' (for everyone)
- 'Please upload (link)...' (for those with the right permissions :-D
Regards
To+
Edit: I used JavaScript to inject the 'No images...' message to aid localization.
It can be improved once we fix some stuff in the translation scripts to better support
placeholders/variables in the templates.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It's quite common to have [something] within facet data, and it produces following error:
Unmatched [ in regex; marked by <-- HERE in m/^[ <-- HERE
This problem was intoduced in Bug 12151 but is trivial to fix.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Good catch.
To test:
- Created a bibliographic record, linked to an authority record (personal name). Did a search that returned the author as a facet.
- Added a [ symbol to the author name.
- Repeated the search
=> FAIL: "Unmatched [ in regex; marked by <-- HERE in m/^[ <-- HERE"
- Apply the patch
- Retry the search
=> SUCCESS: No error, bracket shows correctly.
Passes koha-qa.pl too.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The function header says that DelBiblio checks to make sure there aren't
any issues on any of the items. What the code does, on the other hand,
is to check whether biblio has any items attached, and refuses to
delete biblio if it has any.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
FAIL cataloguing/value_builder/unimarc_field_125.pl
FAIL pod
*** ERROR: empty =head1 in file cataloguing/value_builder/unimarc_field_125.pl
*** ERROR: Spurious text after =cut in file cataloguing/value_builder/unimarc_field_125.pl
FAIL cataloguing/value_builder/unimarc_field_126b.pl
FAIL pod
*** ERROR: empty =head1 in file cataloguing/value_builder/unimarc_field_126b.pl
*** ERROR: Spurious text after =cut in file cataloguing/value_builder/unimarc_field_126b.pl
FAIL cataloguing/value_builder/unimarc_field_225a.pl
FAIL pod
*** ERROR: =over on line 40 without closing =back (at head1) in file cataloguing/value_builder/unimarc_field_225a.pl
*** ERROR: empty =head1 in file cataloguing/value_builder/unimarc_field_225a.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch just adjusts several POD stuff, and in a few cases
reorganizes a hash definition in order to use spaces instead of tabs
for the QA script to be happy.
Nothing important, really. This patch series just changes '.tmpl' for
'.tt'.
Regards
To+
PS beware that running the koha-qa.pl script can take lots of time on this one
:-D
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since all scripts use the '.tt' sufix for template names
there's no need for and regexp that changes from '.tmpl'
to '.tt'.
Regards
To+
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We noticed a bad encoding (diacritics replaced by <?>) in acquisition basket when updating a server to Debian Wheezy.
We found it comes from a query containing biblio.title twice.
Maybe the mysql newer version creates this side-effect.
Test plan :
- Create an order on a record containing a diacritic in title
- Look at the basket : cgi-bin/koha/acqui/basket.pl?basketno=x
=> Without the patch the record title is bad encoded (with <?>)
=> With this patch the record title is well encoded
- Check also basket CSV export
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Good catch!
Works as expected, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Duplicated biblio.title is a (minor) bug, and should be removed.
The side-effect of it solving an encoding problem might be seen
as problematic: it hides a real problem.
The efforts on 11944 actually solve this encoding problem (11944
merged into master actually fixes this), so I'm pushing it, for
a short term solution for stable, with the hope that we will soon
have 11944 pushed.
BTW, non-diacritic but non-ASCII characters are not broken either.
If you do a kill -s HUP sipserver_pid the server process
should restart its children.
This was not happening although it was logging the commencement
of the process.
Removed traces of Exporter usage this was always incorrect
this program inherits from Net::Server 'use base' to make inheritance
clearer. Removed unnecessary begin block
made file executable so it can run
added a shebang line so OS knows to invoke perl to compile and run
the file.
I've removed the debug code dumping the config to STDOUT,
it should not have gone into the production version.
One of the first things this program does is close stdout etc and
reopens the sip sockets to them. Assuming you can print to them other
than as part of the sip dialogue is not always safe.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes how the OPACBaseURL parameter gets set in the subroutine
get_template_and_user in Auth.pm.
Currently, it's being set by the $ENV{'SERVER_NAME'} variable. In many
cases, this will probably match the URL that the user uses to access a
page. However, this causes problems with reverse proxies.
There are ways to compensate for proxy servers (such as inspecting
other variables set by the web server), but such a solution seems
a bit convoluted...especially since we already use the system preference
OPACBaseURL in many other parts of Koha.
We probably shouldn't be passing OPACBaseURL from Auth.pm at all, and
instead use the Koha TT plugin and using_https param to determine
protocol. However, that's outside the scope of this bug/patch.
This patch is just meant to fix an existing bug.
I did leave the $ENV{'SERVER_NAME'} as a full back if OPACBaseURL isn't
set, but that's it.
_TEST PLAN_
Before applying:
1) Clear your OPACBaseURL preference
2) Perform a search in the OPAC
3) Click on or hover over the orange RSS icon
4) Note that the URL used for the RSS links is either:
a) The same URL you used to access Koha (no reverse proxy)
b) The ServerName from your Koha apache conf which isn't the
same URL you used to access Koha (reverse proxy)
5) Add an OPACBaseURL that isn't the same as the actual OPAC URL
6) Note that the OPACBaseURL system preference has no effect here
After applying the patch:
7) Refresh the page
8) Note that the URL you see now is actually the OPACBaseURL system
preference that you set
9) Clear your OPACBaseURL system preference
10) Refresh your search page
11) Note that the URL has reverted back to the URL that you saw before
(either the original Koha site URL or the Koha ServerName defined
in Apache and not the URL of the proxy)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There are two date fields when receiving serials on serials-edit.pl,
these inputs should have a calendar widget like other date fields
in Koha.
Test Plan:
1) Apply this patch
2) Recieve a serial
3) Note when clicking on the "Published on" or "Expected on" fields
you will now have a calendar popup. Note you can still manually
edit the date if you wish to.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On testing I've found that t/db_dependent/Suggestions.t leaves
cruft on the DB. Small followup for that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Follow-up to fix additional suggestion statuses, which are not working
properly due to
416: borrowernumber => $input->param('borrowernumber'),
being evaluated in list context inside $template->param() call arguments.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The tabbed display in suggestions offers different options to organize
the tabs. The descriptions on the tabs and some of the search options were
not working correctly, displaying as "Unknown".
To test:
- Add several suggestions to your installation, make sure you have:
- suggestions from different users
- suggestions managed by different users
- suggestions with different statuses
- suggestions with different selected item types
Test all the 'organize by' options (except "Organize by: Library"
- see note below), make sure that the tabs and search options
have correct descriptions and do no longer display as "Unknown".
- Add 1 or 2 custom status to SUGGEST_STATUS authorized value.
- Verify display is still correct and your new status are displayed.
Note: "Organize by: Library" option is currently severely broken
(and not easily fixable, especially for 'IndependentBranches'
enabled). But this turns out to be a separate issue, with a different
underlaying causes, and it's outside the scope of this patch.
This should be dealt with later, in it's own bug report.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
