Bug 14507 introduced the use of checkpw in C4::SIP::ILS::Patron so that
non-Koha internal authentication processes would be able to function via
SIP ( LDAP et al ).
The problem is that checkpw changes the userenv to that of the patron!
This is not usually an issue in Koha because most of the time that
patron running through checkpw is the one to be logged in.
Aside from SIP2 the only other area where this may be an issue is in SCO
when using SelfCheckoutByLogin.
Test Plan:
1) On master, check out an item to a patron via SIP2
2) Note the checkout lists the item as having been checked out
from the patron's home library not matter which library is was
supposed to be checked out from.
3) Apply this patch
4) Re-checkout the item
5) The item should now be checked out as if it was checked out from
the library as defined in the SIP configuration file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This uses a hacky but simple method to get the correct script name under
proxied packaged Plack.
Test plan:
1) Log out of both the OPAC and staff side.
2) Try to access a page that requires login (opac-reserve.pl is a
good one for the OPAC), then log in.
3) You will be redirected back to mainpage.pl or opac-user.pl.
4) Repeat above for both staff side and OPAC.
5) Apply patch.
6) Repeat steps 1-4; you should be redirected back to the original
page you were on.
7) Repeat the above for both a traditional CGI and kohadevbox/package
Plack installation.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are 2 prefs to drive this feature: StaffAuthorisedValueImages and
AuthorisedValueImages. AuthorisedValueImages is not added by
sysprefs.sql and does not appear in updatedatabase.pl, we could easily
imagine that nobody uses it.
With XSLT enabled, the feature is only visible on a record detail page
at the OPAC, if AuthorisedValueImages is set. Otherwise you need to turn
the XSLT off. In this case you will see the images on the result list
(OPAC+Staff interfaces) and OPAC detail page, but not the Staff detail
page.
This patch suggests to remove completely this feature as it does not
work correctly.
The ability to assign an image to an authorised value is now always
displayed, but the image will only be displayed on the advanced search
if defined.
Test plan:
Confirm that the authorised value images are no longer visible at the
opac and the staff interfaces.
The prefs should have been removed too.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently if not logged in when browsing to
http://YOURCATALOG/cgi-bin/koha/sco/sco-main.pl
You are redirected to opac-auth.tt and SCOUserCSS and SCOUserJS are not
loaded. This page passes through a parameter to the template to indicate
this is an SCO login and appropriate CSS and JS should be loaded.
Additionally this patch ensure that when loggin in using the form you
are redirected to the sco-main.pl instead of the patron account page for
the user.
To test:
1 - Verify that normal login works on both staff and opac
2 - Verify that SCO link goes to login page if AutoSelfCheckAllowed is
set to "Don't allow"
3 - Enter changes into SCOUserJS and SCOUserCSS and observe these are
present on SCO log in page with AutoSelfCheck disabled
4 - Verify that a logged in opac user without permissions cannot access
the self-checkout module
5 - Verify that AutoSelfCheckAllowed and associated system preferences
function as expected
6 - Verify the AutoSelfCheck user is logged out if they attempt to visit
another page
Followed test plan.
If I go to http://YOURCATALOG/cgi-bin/koha/sco/sco-main.pl, CSS and JS trigger already on
the login form, I suppose that is intended.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
The login page should not be displayed if the page is displayed in a
frame.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Test Plan (remains the same):
0) Back up your database
1) Apply all these patches
2) In your mysql client use your Koha database and execute:
> DELETE FROM systempreferences;
> SOURCE ~/kohaclone/installer/data/mysql/sysprefs.sql;
-- Should be no errors.
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see 4 entries.
> QUIT;
3) Restore your database
4) Run ./installer/data/mysql/updatedatabase.pl;
5) In your mysql client use your Koha database and execute:
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see the same 4 entries.
6) Log into the staff client
7) Home -> Koha administration -> Global system preferences
8) -> OPAC
-- make sure your OPACBaseURL is set (e.g. https://opac.koha.ca)
9) -> Administration
-- There should be a 'Google OAuth2' section with the ability
to set those 4 system preferences.
10) In a new tab, go to https://console.developers.google.com/project
11) Click 'Create Project'
12) Type in a project name that won't freak users out, like your
library name (e.g. South Pole Library).
13) Click the 'Create' button.
14) Click the 'APIs & auth' in the left frame.
15) Click 'Credentials'
16) Click 'Create new Client ID'
17) Select 'Web application' and click 'Configure consent screen'.
18) Select the Email Address.
19) Put it a meaningful string into the Product Name
(e.g. South Pole Library Authentication)
20) Fill in the other fields as desired (or not)
21) Click 'Save'
22) Change the 'AUTHORIZED JAVASCRIPT ORIGINS' to your OPACBaseURL.
(http://library.yourDNS.org)
23) Change the 'AUTHORIZED REDIRECT URIS' to point to the new
googleoauth2 script
(http://library.yourDNS.org/cgi-bin/koha/svc/auth/googleopenidconnect)
24) Click 'Create Client ID'
25) Copy and paste the 'CLIENT ID' into the GoogleOAuth2ClientID
system preference.
26) Copy and paste the 'CLIENT SECRET' into the GoogleOAuth2ClientSecret
system preference.
27) Change the GoogleOpenIDConnect preference to 'Use'.
28) Click 'Save all Administration preferences'
29) In the OPAC, click 'Log in to your account'.
-- You should get a confirmation request, if you are
already logged in, OR a login screen if you are not.
-- You need to have the primary email address set to one
authenticated by Google in order to log in.
30) Run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^(use vars .*)\$VERSION\s?(.*)/$1$2/' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The singleBranchMode system preference does not make sense.
Either the install has only 1 library defined or several. In both case,
we can easily guess the behavior to follow.
So the idea of this patch is to replace the fetch of this syspref with a
call to count the number of libraries defined in DB.
Test plan:
1/ From a fresh Koha install, execute the DB entry to remove the pref.
2/ Define only 1 library
3/ Confirm that Koha behaves the same as before (try to change your
library, look at the facets)
4/ Create another library (or more) and reinsert the pref and set it:
insert into systempreferences (variable, value)
values('singleBranchMode', 1);
5/ Execute the DB entry
You should get a warning message.
6/ Repeat 3.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Does what it says, but will change behaviour for any Koha install that
has 2 branches defined, One circulation, and this preference set.
If that is an acceptable change, we might need to make sure this is noted well in the
release notes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Log you in!
Without this patch applied, you will get a warning
"Fetching the value or values of a single named parameter"
With this patch applied, the warning from C4::Auth line 401 should not
appear anymore in the log file.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note: no warnings for older CGI versions.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If you use multiple instances on one server, you could have the situation
that instance A creates the cgisess subfolder and instance B could have a
permission problem. This patch resolves that by allowing each instance to
have its own cgisess subfolder.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When some users want to improve performance, one suggestion is to switch the syspref "sessionstorage" to 'tmp',
which store the session info in the /tmp directory instead of the database.
Depending on the frequency of the cleaning process (or lack thereof),
this can be heavy pollution into the /tmp directory, making it unusable.
"rm cgi*" would not even work since cgi* extends to over 8000 items...
A simple fix is to modify the target directory in C4/Auth.pm to /tmp/cgisess.
Testing scenario:
1) change the syspref SessionStorage to 'tmp'
2) Log into the OPAC, validate that a file named /tmp/cgisess_(something) got created
3) Apply the patch
4) Log into the OPAC, validate that a file /tmp/cgisess/cgisess_(something) got created
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised. Session files are created in /tmp/cgisess/ instead
of directly in /tmp. I usually store sessions in memcached, but a
couple of times memcached has died on me, and before I knew it, /tmp
was so full of sessions files, I could not easily delete them with
"rm /tmp/cgisess*". Being able to delete /tmp/cgisess/ should be a
bit easier.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan
1/ enable OpacAddMastheadLibraryPulldown
2/ Defined a group of libraries as searchdomain
and tick 'show in pull down'
3/ At the OPAC, go on the advanced search form, limit by the group of
libraries you have just created.
4/ The group should be selected by default in the dropdown list
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
http://bugs.koha-community.org/show_bug.cgi?id=15294
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This is similar to bug 12877
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
While this is missing a detailed test plan, what I did to test was
1/ Login to koha .. it works
2/ Apply patch
3/ Login to koha .. it still works, no regressions. I can't test the
shibboleth part but it doesnt break anything else so I'm happy to sign
off
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
We had to implement this fix for one of our customers using Shibboleth.
Can verify that it fixes the issue (which, incidentally, breaks
stage-marc-import since that depends on a constant sessionID).
Passing QA (verified with QA tools). Thanks, Martin!
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine does a lot a processing and should only be called when
necessary.
In the get_template_and_user subroutine (so called from any pages of
Koha), it is call to pass the branchcode, title, firstname, surname and
borrowernumber values for the logged in user.
This subroutine calls GetMemberAccountRecords which retrieve the items
infos for all accountlines entries of the logged in user.
On members/members.pl, let's say you have 74 entries in the accountlines
tables, the page will execute 115 SELECT instead of 35 if you don't have any
accountlines entries.
With this patch, the number of SELECT is always 31.
To test this patch you should have technical skills to know what to do.
Note that USER_INFO was an array of... 1 element. Now it's a hashref.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch enable use of IntranetUserCss on staff client
login page.
To test:
1) Add something to IntranetUserCSS to modify login page,
for example
#login h1 a {
height:30px;
}
2) Logout from staff client, no changes on login page.
3) Apply the patch
4) Reload, now logo is cut in half :)
Bonus) Login again an try changing image, add
#login h1 {
background: url(http://example.com/img/other-logo.png) no-repeat top center;
}
and fix height. Logout and check
This also affects 3.20 and perhaps earlier versions.
Re-upload to fix examples
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The SCO user should only be allowed to access to the SCO module.
This patch make the session ends if the user tries to access another
page after the SCO module.
Test plan:
0/ Configure the SCO module correctly
1/ Go on the sco main page (sco/sco-main.pl)
2/ Try to go somewhere else: you should not be logged in
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Extends login screen to pass along #hash
* Adds JSONP support to C4::Service
* Extends humanmsg to allow per-message classes
* Adds proper charset to results of svc/bib
Test plan:
1. C4/Auth.pm and .../intranet/.../auth.tt: verify that login/usage
works as expected, despite the change to pass on the fragment (...#blah)
from the URL.
2. C4/Service.pm and humanmsg.js: verify that editing system
preferences (the main user of these modules) works correctly despite
updates.
3. svc/bib: verify that records can be correctly downloaded with the
change of character set. This can be done in a Firebug/Chrome Devtools
console by running `$.get('/cgi-bin/koha/svc/bib/1')` and inspecting the
results (possibly replacing 1 with a different valid biblionumber).
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
These 2 fields are not used anymore, but we want to keep them anyway.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
CGI->url does not return the correct url on install using packages.
Test plan:
1/ Try to reproduce the bug from the description of bug 15005.
You should be able to login to the intranet and the OPAC
2/ Send a basket and a list from the intranet and the OPAC.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Mubassir Ahsan asked on the Koha mailing list:
Is there any option to set Saturday as the first day of
the week? Please help me.
CalendarFirstDayOfWeek is currently either Sunday|Monday.
By converting it to 0|1|2|3|4|5|6
(Sunday, Monday, ..., Saturday), we can allow any day of the
week to be the first day of the week in the date picker.
TEST PLAN
---------
1) Backup DB
2) In mysql:
> DELETE FROM systempreferences;
> SOURCE .../installer/data/mysql/sysprefs.sql
> SELECT variable,value FROM systempreferences;
-- It should say 'CalendarFirstDayOfWeek' and '0'
May say '1' if you are using Norwegian.
3) Restore your DB
4) .../installer/data/mysql/updatedatabase.pl
-- If your previous value for 'CalendarFirstDayOfWeek' was
'Sunday', it should be '0'. For 'Monday', it should be '1'.
5) Test an installation with 'de-DE' as the language.
-- The default value should be '1'.
6) Test an installation with 'nb-NO' as the language.
-- The default value should be '1'.
7) In the staff client, confirm that any day of the week is
available in the I18N/L10N system preferences for the
CalendarFirstDayOfWeek dropdown.
-- I'm aware they aren't in order, but I'm after
functionality, not finesse.
8) In another tab, go to a staff place that has a datepicker.
For example, Home -> Tools -> Inventory/stocktaking
9) For each possible value in the CalendarFirstDayOfWeek,
go to the other tab, refresh the page after updating the
system preference, and click the datepicker icon.
-- The date picker should then start on the selected
day of the week.
10) Log into OPAC
-- This may require setting: opacuserlogin to 'Allow'.
11) Click the personal details tab on the left.
12) There is a date picker for the date of birth.
-- The date picker should then start on the selected
day of the week.
13) Run koha QA test tools.
NOTE: not an atomic update, since this is an old patch.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
In Bug 14408 first patch, the regexp used needs an escape on dot and does not need an ending "?"
Test plan :
- prove t/db_dependent/Auth.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Counter counter patch
Please test well, including with the null byte %00, this uses a whitelisting to only allow files ending with .tt
and not allowing ../etc
Note the previous patch tries to protect against /etc/passwd
but //etc/passwd is now vulnerable. I do think a whitelist is safer than trying to do a blacklist
/cgi-bin/koha/svc/virtualshelves/search
/cgi-bin/koha/svc/members/search
Are vulnerable
To test:
1/ Hit /cgi-bin/koha/svc/members/search?template_path=members/tables/members_results.tt
Notice you get a valid JSON response
2/ Hit
/search?template_path=..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2fetc%2fpasswd
(You may have add more ..%2f or remove them to get the correct path)
Notice you can see the contents of the /etc/passwd file
3/ Hit
/cgi-bin/koha/svc/members/search?template_path=test%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2f..%2fetc%2fpasswd
4/ Apply patch
5/ Hit the first url again, notice it still works
6/ Hit the second url notice it now errors with a file not found
7/ Hit the third url notice it now errors with a file not found
Repeat for the other script also
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Most of them were found and fixed using codespell.
Fix also some related grammar issues.
In C4/Serials.pm a variable was renamed to make future codespelling
checks easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
http://bugs.koha-community.org/show_bug.cgi?id=14383
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This pref does not work at all, the interface let the user choose to
list all suggestions, but whatever he chooses the suggestion list is the
same.
This patch cleans a bit the suggestedby management.
There are a lot of cases to test, because linked to 2 prefs:
AnonSuggestions and OPACViewOthersSuggestions.
1/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 0
- A non logged in user is not able to make a suggestion.
- A logged in user is not able to see suggestions made by someone else.
2/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 1
- A non logged in user is not able to make a suggestion.
- A logged in user is able to see suggestions made by someone else.
3/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 0
- A non logged in user is able to make a suggestion.
The suggestedby field will be filled with the AnonymousPatron pref value.
He is not able to see suggestions, even the ones made by AnonymousPatron.
- A logged in user is not able to see suggestions made by someone else.
4/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 1
- A non logged in user is able to make a suggestion.
He is able to see all suggestions.
- A logged in user is able to see suggestions made by someone else.
In all cases a logged in user should be able to search for suggestions
(except if he is not able to see them).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All use cases tested, work as expected
No errors
Only comment is perhaps (in the future) a gracefull failure
when AnonymousPatron is not set, or has '0' value
Message is DBIx::Class::ResultSet::create(): Column 'suggestedby' cannot be null at ...
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The borrow permission was used but uselessly.
For instance, at the opac, the flagsrequired parameter was set to
'borrow' but the 'authnotrequired' was set also (which means no auth
required).
At the end, this permission was used at only 1 place: for the basket,
intranet side.
This can be replaced with the catalogue permission (which is used to
search).
Test plan:
1/ Confirm that you are able to show/download/sent the cart (intranet side)
with the catalogue permission.
2/ At the OPAC, you should be able to access the same pages as before
with any other permissions.
Concretely it is quite difficult to test this patch, you should have a
look at the code.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
- Allow commenting in OPAC (Syspref reviewson)
- Log in to OPAC
- Do a search with many results
- Click on a biblio in result list
- Verify that you can browse the results in detail view ("Browse results")
- Repeat teh search above
- Click on the same biblio as above
- Add a comment (Tab "Comments")
- Close commenting window
- Click on "Next" in result browser
Result: The next biblio is displayed, but result browser has disappeared.
To test:
- Apply patch
- Try to reproduce issue above, verify that result browser does no longer disappear
AMended to remove whitespace chars. / MV
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug & solution checked, works well. No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TEST PLAN
---------
1) $ prove t/db_dependent/Auth.t
-- warnings
2) Apply this patch
3) $ prove t/db_dependent/Auth.t
-- only one specific type of warning
4) Apply bug 5010 patch
5) $ prove t/db_dependent/Auth.t
-- noisy is eliminated
6) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
With patch only one warn
With 5010 no more warns
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Same as previous patch for opacuserjs
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Worked before and after updatedatabase.pl, though after
is less confusing to the programmer unaware of case-insensitivity.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To match IntranetUserCSS, intranetuserjs should be renamed
IntranetUserJS.
Test plan:
1/ Be sure there is no occurrence of intranetuserjs
2/ Confirm the pref still works as before
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Worked before and after updatedatabase.pl, though after
is less confusing to the person unaware of case insensitivity.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This code causes the installer to re-check dependencies during the
upgrade process.
Test Plan
---------
1) Log in to staff client
2) Koha Administration -> Global system preferences -> Local
3) Change Version to previous version -- DO NOT HIT SAVE YET!
4) In command line: sudo apt-get purge libpdf-fromhtml-perl
NOTE: This could be ANY required library. I chose
PDF::FromHTML, because it has been a thorn in my side.
5) NOW! Hit the 'Save' button.
6) Log in, etc. etc...
-- Blows up on redirect to log in.
7) In command line, add it back (I had to compile my own so,
I used sudo dpkg -i /path/to/libpdf-fromhtml-perl...)
8) Apply patch
9) Edit the C4/Installer/PerlDependencies.pm to make
PDF::FromHTML required. See also bug 14103.
10) Log in to staff client
11) Koha Administration -> Global system preferences -> Local
12) Change Version to previous version -- DO NOT HIT SAVE YET!
13) In command line: sudo apt-get purge libpdf-fromhtml-perl
14) NOW! Hit the 'Save' button.
15) Log in, etc. etc...
16) Once warned you are missing it, add it back at the command line.
17) Click 'Recheck'
-- Proceeds as expected now.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It will permit not to run another perl interpreter.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds:
- links to the new pages.
- syspref description
- links on the main page (intranet)
- the DISCHARGE type for debarment
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch allows to use CAS authentication for intranet login.
It works exactly the same as the OPAC login, except that the
staffClientBaseURL syspref must be set for intranet login
(like OPACBaseURL must be set for OPAC login).
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In C4::Auth there is a use C4::VirtualShelves.
Virtualshelves are displayed in all OPAC pages, but not in intranet.
For performance, we should move this into a require only for opac pages.
This patch adds a condition to fetch virtualshelves only if opac and moves the dependancy on C4::VirtualShelves into require calls.
On my desktop, I have those compilation times for C4/Auth.pm :
- Without patch : 0,41 seconds
- With patch : 0,22 seconds
This performance improvement is very usefull for pages that only use a few as dependancy, like errors/404.pl
Test plan :
- Be sure there are some public lists
- Apply patch
- Go to opac (not logged-in)
- Click on "Lists"
- Check you see the public lists
- Login with a user
- Be sure this user has some private lists
- Click on "Lists"
- Check you see the public and private lists
- Logout
- Go to /cgi-bin/koha/opac-reserve.pl
- You see the loggin page
- Click on "Lists"
- Check you see the public lists
- Go to intranet
- Check you can loggin
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan (from comment #1)
1) Apply this patch
2) Run updatedatabase.pl
3) Verify the system pref OpacColorStyleSheet still works
i.e. no change should be noted
Additionally, I changed the path to an other stylesheet and verified that it worked.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and no more occurences of opaccolorstylesheet were found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the user is already logged-in, do not trigger CAS authentication
even if there is a ticket in the parameters.
1) Authenticate to the OPAC through CAS.
2) Once redirected to your account, hit F5 or the refresh button of your browser.
3) You're logged out.
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Luce Barbey <luce.barbey@cirad.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Added sign of lines according to bug.
Works as described, small change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Reserves:
* Added OnShelfHoldsAllowed() to check issuingrules
* Added OPACItemHoldsAllowed() to check issuingrules
* IsAvailableForItemLevelRequest() changed interface, now takes
$item_record,$borrower_record; calls OnShelfHoldsAllowed()
opac/opac-reserve.pl and opac/opac-search.pl:
* rewrote hold allowed rule to use OPACItemHoldsAllowed()
* also use OnShelfHoldsAllowed() through
* IsAvailableForItemLevelRequest()
templates:
* Removed AllowOnShelfHolds and OPACItemHolds global flags, they now
only have meaning per item type
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
I have tested this patch left, right and upside down for the last
several months. All tests have passed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There were multiple calling conventions for C4::Context's
set_userenv routine. So the following commands were used to
find discrepancies:
grep "::set_userenv" `find .`
grep "\->set_userenv" `find .`
The first grep demonstrated that the smaller change is from
:: to -> as only C4/Auth.pm, installer/InstallAuth.pm, and
t/db_dependent/Circulation.t would need to be modified. This
patch corrects C4::Context's set_userenv routine to be object
call based (use ->) by using a shift to ignore the first
parameter, and modify the three files found with :: calls.
As the result of trying to roll a distribution,
t/Circulation_barcodedecode.t was discovered to be faulty. The
cause being incorrect parameters! This was hidden when there
was no shift in the set_userenv routine. However, with its
correction, the test broke.
This led me to read the POD documentation for the function
set_userenv in C4::Context and realize it was outdated as
well. It has been revised to match the current version of
the function.
Then intentionally bad parameters passed to the set_userenv
routine in C4::Context were hunted down. The biggest problems
were missing surnames or branch names.
Rebase required because of shibboleth change in C4/Context.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There was an instance of the pragma missed which meant the the original
patch set didn't actually solve the problem in a large number of cases
This patch adds in the relevant statement.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test:
1) Enable the system preference SessionRestrictionByIP
2) Change your system IP. It will not checkout your system IP or signout.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A failed login should not leave the user in a half logged authenticated
state, but rather return them to an anonymouse session as per the
pre-login attempt state.
To replicate error:
1. Try to log in with some nonexisting user id or wrong password in the
OPAC
2. Go directly to /opac-user.pl (e.g., enter it in the browser address
bar, or just click on the "Log in" link)
3. Observe a DBI error displayed on the screen
4. You are now in the "deadloop" of sorts (opac/opac-user.pl refuses to
display the login screen, no matter how many times you try to reload
it); to break the deadloop, one needs to:
- remove session cookie from the browser (or cause the session to
expire in some other way - closing browser window would be probably
enough for that)
- remove offending session on the server (from mysql sessions table,
..)
- log in with proper credentials using some other page (like
opac/opac-main.pl right-side panel), which does not involve
opac/opac-user.pl being called without "userid" CGI parameter.
To test:
1. Test as above, the DBI error should no longer be present
2. Check that search history works across failed and sucessful login
attempts
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add a missing semicolon to the end of a template variable assignment
line. This patch should not affect operation.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
