If a person is fetching all data, it seems most likely that that person wants
to see all the data in the chart. We should default to that behavior.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patchset prevents the full return of report data unless explicitly requested by the user for charting purposes
Additionally the user is warned if requesting more than 1000 rows of data
To test:
1 - Create a report that returns over 1000 rows of data
2 - Run the report
3 - Note you have two buttons now 'Chart data' and 'Fetch all data for chart'
4 - Click chart data
5 - Note the note that you are only charting visible data
6 - Create the chart and confirm it works
7 - Close the chart
8 - Click 'Fetch all data'
9 - Note the confirm window
10 - Click 'cancel', note there is no change
11 - Repeat and click ok
12 - Fetch all data button is gone
13 - Page to next data, note fetch all does not return
14 - Click 'Chart data'
15 - Note you now have checkbox option to use all data in report
16 - Click it
17 - Create chart
18 - Confirm it works as expected
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds back a fieldset ID which was accidentally removed by Bug
14570:
<fieldset id="memberentry_guarantor" class="rows">
This ID is important if libraries want to customize the patron entry
page to hide the guarantor section.
To test, apply the patch and go to Patrons -> New patron.
Inspect the markup and look at the fieldset labeled "Guarantor
information." It should have the correct ID attribute.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Due to how moredetail.pl was written it was hard to know which action
was triggered.
Test plan:
- Set MarkLostItemsAsReturned to "from the items tab of the catalog
module."
- Check an item out to a patron
- Use additem.pl to set that item to a lost status without returning it
- go to moredetail.pl for that item
- mark item as either damaged or withdrawn without interacting with the
lost dropdown
- note that item has not been returned
Note for QA: Maybe we could have just tested if exists $item_changes->{'itemlost'}
to call LostItem
Signed-off-by: Claudie Trégouët <claudie.tregouet@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The introduction of `options_for_libraries` in the filter-orders include
template requires that we process 'html_helpers' within the file to
ensure it always compiles.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Just a find and replace on the changed system preference name.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- Rename CircAutocompl system preference to PatronAutocompletion
- Take this system preference into consideration for patron search
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
- Apply the patch
- Go to "Patrons" (members/members-home.pl)
- Check that autocomplete is enabled for patron search
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Some libraries would like to show the amount of change given on print reciepts triggered by FinePaymentAutoPopup
so the patron can verify he or she has recieved the correct amount of change.
1) Apply this patch
2) Edit ACCOUNT_CREDIT slip and add "[% IF change_given %]<h1>CHANGE: [% change_given %]</h1>[% END %]" at the top
3) Enable FinePaymentAutoPopup
4) Make a payment
5) Note the change given is shown on the popup receipt
6) Note the change given is *not* shown on subsequent prints of the same receipt using the "print" button for the payment
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Hasina Akhte <hasinaa@pascolibraries.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This enhancement will allow a library to choose whether to use the alias of the
current OPAC or the value of OPACBaseURL as the return url when making payments
via PayPal.
To test:
Note: you need to have PayPal enabled on your system (either Sandbox mode or
Live) and be using an alias URL for your OPAC.
1. Apply the patch.
2. With the option "PayPalReturnURL" set to "OPACBaseURL", log into a card via
the OPAC and start the process to pay in PayPal (you can either complete the
payment or cancel from the PayPal page). When you are returned to the OPAC, the
domain will be the value of OPACBaseURL.
3. With the option "PayPalReturnURL" set to "OPAC's alias", repeat the above
sequence to make a payment in PayPal. When you are returned to the OPAC, the
domain will be your current alias.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Add "QueryRegexEscapeOption" system preference to provide option to escape
Elasticsearch regexp delimiters (/) within queries, or alternativly to
unescape escaped slashes (\/) while escaping unescaped slashes, in
effect making "\/" the new regexp delimiter.
How to test:
1) Run tests in ./t/Koha/SearchEngine/ElasticSearch/QueryBuilder.t
2) All tests should succeed
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Currently the order search can't be limited by managing library.
The patch adds the search option to the order history search form
and a column for the managing library to the search results table.
To test:
- Create some baskets with orders
- Set managing library for some, but also have some without
- Apply patch
- prove t/db_dependent/Acquisition.t
- Go to Aquisition > Orders search tab on top > Advanced search link
- Search for orders without limiting
Orders with and without managing library set should show up
- Limit search to a specific managing library
- Verify results match expectations
Signed-off-by: Alex Sassmannshausen <alex@komputilo.eu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Add to basket
2 - Note the options on the page
3 - Add &close=1 to the url
4 - Note some inputs are disabled
5 - Save anyway, note it is a regular order
6 - Add another order to basket
7 - Save it
8 - Modify
9 - Add close to the url again
10 - Save changes
11 - No functional change
12 - Apply patch
13 - Note close parameter has no effect now
14 - Confirm you can place and confirm orders as before
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds template filters as prompted by the QA tool.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Use the community's terminology, change coce.js's path, update <script>
to Asset, remove forbidden patterns
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
TEST PLAN:
1) Apply the patch with git-bz
2) Run updatedatabase.pl
2.1) Console output should confirm database modification
3) Visit the 'Enhanced Content' tab of admin/syspref
3.1) ressource is /cgi-bin/koha/admin/preferences.pl?tab=enhanced_content
3.2) You should see that the previous preference, Coce, is now CoceOPAC,
and that a new preference was added, CoceIntranet
4) Activate CoceIntranet
5) Do a search for a book for which you have a Coce cover
5.1) The cover image url should now point to a provider you defined in Coce
5.2) Your Coce log should show a query
6) Click on the book's name to visit the detail.pl page
6.1) The book's cover should also be provided by Coce on that page
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a missing "noExport" class to ensure that the "actions"
column isn't included in export and print views.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The DataTable configuration wasn't working on the table showing an
individual category's authorized values because of a mismatch in the
table id. This patch corrects it.
To test, apply the patch and view the "Authorized values" page.
The initial list of categories should be displayed as a DataTable. Click
through to see the values defined for any category. The resulting table
of values should also be a functioning DataTable.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the authorized values DataTables configuration to add
export options.
To test apply the patch and go to Administration -> Authorized values.
Test the "Export" button and confirm that the data is exported correctly
with each option.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This completes suggestion status options in the templates in 2 places
so all values can be translated and show correctly.
To test:
- Create 2 suggestions
- Accept them
- Create a basket and order those 2 from suggestions
- Close the basket
- Receive shipment and receive one of the 2 suggestions
- Go back to suggestions:
- Look at the status column in the suggestions table for both
- Verify that it shows AVAILABLE
- View both suggestions
- Verify that the Status: is empty
- Apply patch
- Repeat test from above, it should all show nicely now
Signed-off-by: Claudie Trégouët <claudie.tregouet@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
A Perl boolean value is on the server side converted
to a JS string (resulting in the values '0' or '1).
Since the string '0' is a truthy value in JS this
incorrectly triggers window.close() on the client
in many instances, for example when adding a new item.
To test:
1. Go to a bibliographic record in the staff client.
2. Expand the "New" menu and open "New item" in new tab.
3. The new tab will immediately close.
4. Apply the patch.
5. Perform steps 1-2 again.
6. The tab should now remain open.
Sponsored-by: Gothenburg University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This adds a ; as separator between 440 and 490 fields used in the
same record. Currently we loop first 440 and then 490. 490 is displayed
depending on the indicator.
So after we finish the first loop, we check for existence of 490 on the
same record now to decide if a separator is needed.
To test:
- Look at various records using one or multiple 440 and 490 fields
- Verify the display is correct, especially when both appar on the
same record in both OPAC and staff
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Currently Koha very inconsistently adds a . at the end when
outputting MARC fields on the detail views.
This patch removes the few cases where we add in .
Keeping the end user in mind, I believe it's not needed and
the added consistency will be nice. ISBD should be added on
cataloguing or by templates, but we should not mix when possible.
To test:
Catalog the following fields, if repeatable, add more than one:
- 020
- 022
- 111
- 242
- 245
- 246
- 250
- 300
- 440
- 490
- 700/710/711 with $i
- 700/710/711 ind.2 = 2
Verify both on staff and OPAC detail pages that there is no
additional . at the end of the line.
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: frederik <frederik@inlibro.com>
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch optionally adds an 'all' option to report dropdowns
Note you will need to use 'LIKE' instead of '=' to allow 'All' to work
To test:
1 - Write a report:
SELECT branchname FROM branches WHERE branchcode LIKE <<Branch|branches>>
2 - Run it
3 - Select a branch
4 - You get one branch info
5 - Note you cannot select all
6 - Apply patch
7 - Run report
8 - No change
9 - Update report like:
SELECT branchname FROM branches WHERE branchcode LIKE <<Branch|branches:all>>
10 - Run report
11 - Select 'All'
12 - You get all branches
13 - Select one branch
14 - You get one branch
15 - Test with other authorised categories (itemtypes, YES_NO, etc.)
16 - Confirm it works as expected
17 - Prove -v t/db_dependent/Reports/Guided.t
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds column configuration to the table of item types
in administration. No new defaults for the table are defined.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> Item types.
- Test that the "Column visibility" button works to show and hide
columns. The "actions" column should be excluded.
- Test that export options (Excel, CSV, etc) exclude the "actions"
column.
- Go to Administration -> Columns settings and edit the default
configuration of the item types table. Confirm that these
changes are reflected in item tyeps administration.
Test with noItemTypeImages on and off.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch effectively uses API to place holds for patrons. It adds a listener on submit event of the form in javascript, where it calls holds API.
To test:
1. Place a hold on any biblio for a patron
SUCCESS => hold is placed or rejected, but no blank page with JSON error is shown.
2. Place a multi hold for any patron
SUCCESS => holds are placed or rejected, but no blank page with JSON error is shown.
3. Sign off
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Apply patches
2 - Update database
3 - Confirm TransfersBlockCirc defaults to 'Block'
4 - Check in an item that needs transfer
5 - Confirm you must deal with the modal to proceed
6 - Repeat checking to get 'wrong-transfer-modal'
7 - Confirm you must deal with it to proceed
8 - Switch the pref to 'Don't block'
9 - Find a new item or cancel/fulfill the preceeding transfer
10 - Check in the item to generate transfer
11 - Note focus remains on the barcode field and you can continue scanning (or typing if you don't have a scanner)
12 - Note typing and pressing enter continues without requiring you to deal with modal
13 - Repeat for wrong transfer modal
14 - Verify hold and other modals still block continuing circulation
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies the checkin process so that any errors or messages
related to the current checkin are displayed in any hold/transit modal
which is displayed. This prevents any information from being hidden by
the modal.
This patch also adds an "information" button to the checkout form which
the user can click to redisplay the last modal which was dismissed
(unless confirming the modal reloads the page).
To test, apply the patch and rebuild the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Test the checkin process with various types of items:
- Item not checked out
- Item not checked out, on hold
- Item not checked out, needs to be transferred
- Item is marked lost, needs to be transferred
- Item checked out, patron has waiting holds (with
WaitingNotifyAtCheckin enabled)
- Item checked out, patron has outstanding fines (with
FineNotifyAtCheckin enabled)
- Test that the modal redisplay button works in cases where the modal
is dismissed without triggering a page reload:
- Hold confirmation -> Ignore
- Transfer confirmation -> OK
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Trailing comma's were causing hidden javascript errors during selenium
tests.
Error was identified by adding a $s->capture($driver) line to the
relevant selenium test and using the following JS snippet to dump errors
to the screen.
(function () {
var ul = null;
function createErrorList() {
ul = document.createElement('ul');
ul.setAttribute('id', 'js_error_list');
//ul.style.display = 'none';
document.body.appendChild(ul);
}
window.onerror = function(msg){
if (ul === null)
createErrorList();
var li = document.createElement("li");
li.appendChild(document.createTextNode(msg));
ul.appendChild(li);
};
})();
Which clearly showed the following error.
ReferenceError: KohaTable is not defined
Removing the trailing comma's introduced in this bug resolved the issue.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds "Withdrawn" status to the item search form and item
search results.
To test you should have one or more items in your catalog which have a
'Withdrawn' status.
Perform an item search and limit to a widthdrawn status. Verify that the
search returns the correct results and that the withdrawn column in
search results shows the correct information.
Test the "Export results to CSV" button. The resulting file should
contain the correct data, including withdrawn status.
Signed-off-by: Joe Sikowitz <joe@flo.org>
Signed-off-by: David Roberts <david.roberts@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Prevent from checking again and again the onsite checkout box when
doing onsite checkouts in batches. If preceding checkout was an onsite
one, the box will be checked.
Test plan:
1. enable OnSiteCheckouts
2. make your circulation rules able to checkout onsite
3. onsite checkout a document
4. you should return to the checkout page, the box isn't checked
5. apply patch
6. updatedatabase.pl
7. redo steps 3, it should again print a checkout page with an
unchecked onsite checkout box
8. enable OnSiteCheckoutAutoCheck system preference
9. redo step 3
10. when returning to the checkout page, the onsite checkout box
should be already checked
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes a change to the JavaScript setup for DataTables button
controls so that if there are no toggle-able buttons (or there is no
columns configuration at all) the column selection menu button will not
appear.
To test, apply the patch and go to Administration -> Columns settings.
- In the Administration section, find the section for the "libraries"
table.
- In the "Cannot be toggled" column, check all the checkboxes.
- Save.
- Go to Administration -> Libraries.
- At the top of the table there should be no "Columns" button, only
"Clear filter" and "Export" buttons.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adds a missing semicolon to one of the lines with translated
messages.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes a change to the subscription entry template as a
workaround to a translation bug which is causing JavaScript errors when
using translated templates.
To test, apply the patch and update and install the de-DE template:
> cd misc/translator
> perl translate update de-DE
> perl translate install de-DE
- Go to Administration -> System preferences and enable the "Deutsch
(de-DE)" language under I18N/L10N preferences -> language.
- Switch to the "Deutsch" translation.
- Go to Zeitschriften (Serials) -> Neues Abonnement (New subscription)
and open the browser console. There should be no errors.
- Links which trigger JavaScript events should work correctly:
"Lieferant suchen," "Nach Datensatz suchen," etc.
Reported-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Thanks-to: Michael Hoffert and Alexander Arlt from koha-de for reporting
it initially and figuring out the root of the issue
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies the template used for translation of item type
descriptions. It is updated with more consistent Bootstrap grid markup
and improved handling of adding and removing rows from the DataTable.
To test you should have more than one translation installed.
- Apply the patch and go to Administration -> Item types.
- Edit an item type.
- Click the translate link.
- Add a new translation. The table of translations should be updated
with your new translation.
- Test the "Delete" link corresponding to your new entry. It should
work correctly.
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Generate a list of fields for the query_string query fields parameter,
with possible boosts, instead of using "_all"-field. Also add "search"
flag in search_marc_to_field table so that certain mappings can be
excluded from searches. Add option to include/exclude fields in
query_string "fields" parameter depending on searching in OPAC or staff
client. Refactor code to remove all other dependencies on "_all"-field.
How to test:
1) Reindex authorities and biblios.
2) Search biblios and try to verify that this works as expected.
3) Search authorities and try to verify that this works as expected.
4) Go to "Search engine configuration"
5) Change some "Boost", "Staff client", and "OPAC" settings and save.
6) Verify that those settings where saved accordingly.
7) Click the "Biblios" or "Authorities" tab and change one or more
"Searchable" settings
8) Verfiy that those settings where saved accordingly.
9) Try to verify that these settings has taken effect by peforming
some biblios and/or authorities searches.
Sponsorded-by: Gothenburg Univesity Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
