This patch is a follow-up for bug 11125, it fixes the bootstrap theme.
Test plan:
1) Remove 'sms' from message_transport_types table.
2) Go on OPAC "My messaging" tab => table columns are out of alignment with table heading.
3) Apply patch => table is correctly displayed.
Signed-off-by: Axelle Clarisse <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
With and without 'sms' existing the display of the table is now correct.
Template only change.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The Classification Sources help file said the source was in the 942$2 but it's in the 952$2 and 94$2 so this patch fixes that.
To test:
* Go to Admin > Classification Sources
* Click Help
* Confirm the Help file is right now
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
String change, no errors.
Note: Perhaps change "Authorized Values ..." for "Authorized values ..."
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new system preference 'OPACAcquisitionDetail'.
If it is enabled, information about items on order will be displayed on
the OPAC detail page.
Test plan:
- switch on the OPACAcquisitionDetails pref.
- set the AcqCreateItems pref to 'receiving'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the "Holdings" tab contains the
line "X item are on order." (at the bottom of the table containing the
item list).
- receive the items.
- verify the number of items has decreased.
- set the AcqCreateItems pref to 'ordering'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the item list contains the items
with the "on order" status.
- receive the items.
- verify the received items no longer have the the "on order" status.
To test completely this feature, you should verify there is no
regression on the pref OpacMaxItemsToDisplay, OpacSeparateHoldings and
OpacSeparateHoldingsBranch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also removed some blank lines from the original patch and bumped up
the DBRev.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
this patch adds a negative-captcha feature to the purchase suggestions form
some info for the curious...
http://nedbatchelder.com/text/stopbots.htmlhttps://github.com/subwindow/negative-captchahttp://www.rubydoc.info/github/subwindow/negative-captcha/frames
to test this patch...
1/ apply patch
2/ enable 'suggestion' and 'AnonSuggestions' sysprefs
3/ attempt to add a 'purchase suggestion' in OPAC
adding the suggestion should succeed
4/ edit the koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-suggestions.tt file,
to reveal the hidden 'negcap' field
replace line 87 opac-suggestions.tt, from...
<li id="negcap" style="position: absolute; left: -2000px;">
to ...
<li id="negcap">
5/ attempt to add another suggestion, and populate the 'negcap' field
adding the suggestion should fail
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Remove the bug report number in the comment since git log
cans provide the same result.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Attempting to merge authorities results in the following error:
Uncaught SyntaxError: Unexpected token u authorities-home.pl:284
showMergingInProgress authorities-home.pl:284
(anonymous function) authorities-home.pl:297
o jquery.js:2
p.fireWith jquery.js:2
e.extend.ready jquery.js:2
c.addEventListener.B
This was the result of the upgrade of jquery-cookie by the patch
for bug 11369; newer versions of jquery-cookie changed the return of
$.cookie('foo') from null to undefined when the cookie is not present.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No test plan, no errors.
Test
1. search some authorities
2. click merge, on browser dev console pops reported error message
'Unexpected token u authorities-home.pl...'
No way to marge auths
3. with pach applied, merging works again
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For libraries with large numbers of records, using a file of barcodes in
the inventory tool without selecting filters to limit the catalog
selection to compare against can result in an error of "could not read
headers" or a page timeout.
When you upload a file of barcodes, and do not specify any filters on
the rest of the form, it effectively runs GetItemsForInventory() such
that *every* item in the database is returned. On a large enough
database, this takes so long that the script times out.
The current documentation in the manual implies that if you upload a
file of barcodes, the *only* thing it does is set the date-last-seen
field. This is not entirely true; it also tries to compare the list of
scanned items to what is expected to be seen in the list of items.
The work-around for libraries with a large number of item records is to,
when uploading a file of barcodes, to also set the filters (e.g.,
library, shelving location, call number range, etc.) to
specify the range of items that the file of barcodes corresponds to.
This patch adds a warning when a librarian attempts to upload a
barcode list file for comparison without selecting any filters
to limit the catalog selection.
Test Plan:
1) Apply this patch
2) Browse to the inventory tool
3) Click the "Choose File" button, select a file
4) Click the "Submit" button
5) You should see a warning message
6) Click "Cancel"
7) Select one of more filters
8) Click the "Submit" button
9) This time the script should proceed without triggering the warning.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you accept or reject a suggestion using the "Others..." option and
entering a reason manually, the text is not showing up in the Bootstrap
OPAC theme as it does in CCSR and prog. This patch corrects the problem.
This patch also adds a missing [% USE AuthorisedValues %] which would
cause errors if the template tried to display a custom suggestion status
as defined in the SUGGEST_STATUS authorized value category.
To test, accept or reject a suggestion and specify a custom reason. View
that suggestion in the Bootstrap OPAC and confirm that the custom reason
is displayed.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The patron summary page in the bootstrap OPAC does not show subtitle in
the list of checkouts, overdues, or holds. This patch corrects this.
To test, set your OPAC theme to bootstrap and log in to the OPAC as a
user who has items checked out, items overdue, and items on hold. At
least one of each of those should be a title which has a subtitle as
defined in Administration -> Keyword to MARC mapping. Subtitles should
appear correctly under the "Checked out," "Overdue," and "Holds" tabs.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Pushed to master by me in my role as OPAC module maintainer
Currently, slips cannot be printed in circulation, members, or the
self check out when using Chrome.
This patch adds a timer of 1ms which allows Chrome's custom code to
prevent "window.close" occuring before the user has dealt with the
print window.
This patch also allows admins to use the 'IntranetSlipPrinterJS'
system preference to override the slip printing code by centralizing
all the slip printing code in slip-print.inc, and including this JS
anywhere it's needed in the staff client.
I haven't used this include in the OPAC SCO but perhaps it would make
sense to do so as well (even if it isn't referred to in the syspref's
name).
_TEST PLAN_
1) Using Chrome on Windows (not sure if this is an issue on other OSes),
try to print a slip in the following locations:
Fines Tab -> Print button
koha-tmpl/intranet-tmpl/prog/en/modules/members/printfeercpt.tt:
Details tab -> Print button -> Print slip || Print quick slip
koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember-receipt.tt:
Details tab -> Print button -> Print summary
koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember-print.tt:
Fines tab -> Accounts tab -> Print (Manual invoice of $5 sundry)
koha-tmpl/intranet-tmpl/prog/en/modules/members/printinvoice.tt:
Checkout tab -> Print button
koha-tmpl/intranet-tmpl/prog/en/modules/circ/printslip.tt:
Finish button
koha-tmpl/opac-tmpl/bootstrap/en/modules/sco/printslip.tt
2) Note that each time you try to print, a new print page is created
but closed before you have a chance to print.
3) Apply the patch
4) Repeat Step 1
5) Note that the print page now doesn't close until after you've
chosen to print or cancel.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some libraries would like to streamline the cataloging process my
automatically updating notforloan values on checkin. For example, an
item is set to notforloan of -1 ( ordered ). The item, is received,
processed, and checked in for the first time before being shelved.
The checkin automatically changes the nfl value from -1 to 0. The
same workflow could be used for damaged items as well.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set the new system preference UpdateNotForLoanStatusOnCheckin
to the following:
-1: 0
0: 1
4) Create an item, set its notforloan value to -1
5) Check in the item, note its not for loan value is now 0
6) Check in the item again, note its not for loan value is now 1
7) Check in the item again, note its not for loan value reamins 1
Signed-off-by: Havilah Lyon <havilah@aflibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Fix breakage of tablesorting when OpacLocationBranchToDisplay
is set to both.
- When displaying the home library, ensure that its correct
name and URL are displayed
- Remove the attempt to display the "opac_info" tooltip for
the home library, as it is not currently retrieved.
RM NOTE: Rather than add a GetOpacInfo function or the like
to the TT Branches plugin, simpler would be adding a
plugin function that fetches a DBIC result object for
a given branchcode, thereby allowing any column in the
branches table to be fetched into the template.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Fix capitalization
[2] Move logic for getting the home library name URL to the
Branches TT plugin
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, in opac-detail.pl, there exists a column named 'Location'.
This column lists the name of the holding branch, and the item's
location description. This can cause confusion to borrowers, as
they may assume that the holding branch is the *owning* branch
(homebranch) of an item.
This could cause a situation where a borrower waits for an
item to be returned to his or her library, only to find that
the library never owned that item, and it was transferred back
to its homebranch. It could also lead a borrower to falsely
assume that his or her home library does not own a copy of a
particular item because the borrower does not see an his or her
home library listed for any of the items on the record.
In addition, even when the holding branch is different
than the home branch, the item's shelving location is displayed,
even though that branch may not use that location.
This commit makes the item details table equivalent to the intranet
details page by adding a "Home Library" column, which displays the
item's home library, as well as the shelving location.
If singleBranchMode is enabled, this column disappears and the
"Location" column displays the shelving location only.
This commit adds two new system preferences:
OpacLocationBranchToDisplay, which defines whether
to display the holding library, the home library,
or both for the opac details page.
OpacLocationBranchToDisplayShelving, which defines
where the shelving location should be displayed,
under the home library, the holding library, or both.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. Tested all variations.
No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new issuing rule: maxsuspensiondays.
A new column "Max. suspension duration (day)" appears in the main table
of the issuing rules.
If this value is filled, on returning an item, a patron won't be
suspended longer than this cap.
Test plan:
1/ Set "suspension in days" to 2.
2/ Check an item out to a patron and specify a due date to today - 10
days.
3/ Check the item in and verify the patron is suspended until today + 10
* 2 days.
4/ Remove the suspension.
5/ Set "Max. suspension duration" to 10.
6/ Check an item out to a patron and specify a due date to today - 10
days.
7/ Check the item in and verify the patron is suspended until today + 10
days.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There is currently no way to set the privacy setting for newly created
patrons. This patch adds a new field "default privacy" to the patron
categories such that each patron category may have a different default
privacy setting.
Test Plan:
1) Apply this patch
2) Edit a patron category, change the default privacy to "forever"
3) Create a new patron of that category
4) Log into the catalog as that patron, verify the privacy setting
is set to "forever"
5) Repeat steps 2-4 with the settings "never" and "default"
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254 [QA Followup 1] - can't set patron privacy by default
* Adds default privacy column to summary table
* Adds default privacy to delete category summary
* Adds "AFTER categorycode" to the database update
* Whitespace cleanup and formatting for affected code blocks
* Switch basic DBI queries to DBIx::Class to simplify code
* Adds reference to misc/cronjobs/batch_anonymise.pl to description
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254 [QA Followup 2] - can't set patron privacy by default
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254: QA FIX: remove trailing whitespaces
This patch removes trailing whitespaces/tab and fix the fields order in
the updatedb entry (according to the kohastructure.pl).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Retested with all 3 themes, works as expected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch changes the default behavior for the 'force' value.
If the pref is set to force, no item is preselected and the item list is
shown.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If the pref was set to 'force', the item selection was not shown.
.copiesrow should be hidden before showing specific #copiesrow_ID
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works on template level, tested with Boostrap and Prog theme
with all 3 possible seetings of OPACItemHolds:
1) no = offer only title level holds
2) yes = offer both title and item level holds
3) force = offer only item level holds
Also ran some additional tests on the Boostrap theme with
deactivated Javascript.
Note: I like this, but I think when "force" is selected the
item list needs to be shown by default. I am also not happy about
preselecting the first item.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Same test plan as previous patch but with the bootstrap theme set.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, the Koha system preference OPACItemHolds allows a library
system to choose to allow patrons to place bib and item level holds from
the OPAC, or to allow patrons only to place bib level holds only from
the OPAC.
This patch set adds a third option, "force", which *requires* that
patrons place item level holds from the opac, with no option of making a
bib level hold.
This patch modifies the system preference OPACItemHolds to be of the
type "Choice", with the choices being "no", "yes", "force". The patch
does not alter the currently set value of OPACItemHolds for database
updates, only adding the additional option.
Test Plan:
1) Set OPACItemHolds to "no". Check that OPAC holds behave as it is now
(no "Place On" column, no "Select a specific copy" table, making a
reserve is successful)
2) Set OPACItemHolds to "yes". Check that OPAC holds behave as it is now
( "Place On" column is there, "Select a specific copy" table shows when
"A specific copy" is selected, making a reserve is successful)
3) Set OPACItemHolds to "force". Check that OPAC holds behave as follows:
- no "Place On" column is present
- "Select a specific copy" table is opened
- making a reserve is successful
This patch is a squashed patch of the 3 following patches:
Amended opac-reserve.tt accordingly
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Bug 7825: Followup prevent submission without choosing an item
+ Fix some ergonomic issues in opac-reserve
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Bug 7825: Updatedatabase should only change the type and options values.
The value field should not be changed. We have to keep '1' for 'yes' and ''
for 'no'.
Original patch is from Srdjan Jankovic.
Signed-off-by: Koha team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on 4th patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
1/ Use the usual way for ordering dates in table
2/ Add a confirmation dialog box on deleting a file
3/ Add some UTs
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(part #1: new module w/ UT + script + template)
New feature, adds an ability to attach arbitrary files to
acquisition records (currently: to the invoices - but it can
be extended to baskets, basketgroups, budgets etc.).
Note: this code is (heavily) based on "Bug 8130 - attach PDF
files to a patron record" by Kale M Hall, main difference being
that new table (misc_files) and new module (Koha/Misc/Files.pm)
are intended to be a little more generic solution - they allow to
store and manage files associated with great many kinds of records,
from arbitrary tables.
Test plan:
1) Apply patch[es]
2) Run installer/data/mysql/updatedatabase.pl
3) Enable system preference 'AcqEnableFiles' in acquisition
4) New option 'Manage invoice files' appears in the invoice
detail page
5) Upload/view/download/delete some files for some invoices
6) Try to delete invoice with files attached (files should
get deleted as well)
7) Try to merge 2+ invoices with files attached; after merge,
all files previously attached to individual invoices being
merged should be attached to resulting invoice (merge destination)
8) prove t/db_dependent/Koha_Misc_Files.t
9) Ensure there are no regressions of any kind in invoice detail
page (acqui/invoice.pl).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This bug adds the "vendor note" for each order in the PDF for
basketgroups. The note is displayed only if it exists, just under the
bibliographic information.
I added a separation line "--------" between bibliographic information
and the note, so that it could be visible at 1st glance.
It also replaces the internal note with the vendor in the CSV for basket
and basketgroup. It is more logical and useful for libraries to export
the note made for vendor, as those files are destined to be sent to the
vendor.
Test plan :
- fill a basket with some orders, some with internal notes, some with
vendor notes
- export the basket in CSV : only the vendor notes should be present
- put the basket in a basketgroup
- export the basketgroup in CSV : only the vendor notes should be
present
- Select "English-2 pages" template for basketgroups in Sysprefs
- export the basket in PDF : the vendor notes should be present under
the bibliographic information
- Select "English-3 pages" template for basketgroups in Sysprefs
- export the basket in PDF : the vendor notes should be present under
the bibliographic information
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the following changes to the template:
[1] If you add an order line, and you have one active fund (and zero or
more inactive funds), the only active fund is preselected.
[2] If you modify an order line while its fund is inactive, it now shows
the label (inactive) behind the fund name. (Note that other inactive funds
may come up when clicking 'Show all' as they did before.)
[3] Corrected some indentation in this template part.
Test plan:
[1] Add an order line while having one active fund. Is it selected?
[2] Add an order line while having two or more active funds. No fund
should be preselected.
[3] Modify an order line with an active fund. Is it still selected?
[4] Modify an order line with an inactive fund F2 (while having one active
fund F1; note that this test explicitly wants F1 to be before F2).
Check if F2 is selected and is labeled inactive.
[5] (Bonus points:) Modify an order line that refers to a deleted fund.
If you edit this order, the fund combo should say: Select a fund.
(Note: if you delete a fund, the budget_id in aqorders remains.)
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
I test against master 3.15.00.051
I test against all the three options of the AcqCreateItem:
placing an order
receiving an order
cataloging the record
All is OK.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The MARC export tool now includes the option to specify a file
containing record IDs to export. When run on the command line,
this is specified using the --id_list_file switch.
Note that the list of IDs acts as a filter on other criteria
for selecting records to import. For example, if you export
all bibs belong to a given library and also specify an ID file,
the bibs must both belong to the library and be in the ID file.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Tested writing txt file with biblionumbers, loading in tools and exporting
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the two FOREACH loops introduced by the patch, wrap
the module and action names with quotes. This fixes a
problem where parsing the template crashes with the following
error:
Template process failed: file error - parse error - .../viewlog.tt line 83: unexpected token (RETURN)
[% FOREACH actx IN [ ADD DELETE MODIFY ISSUE RETURN CREATE ] %] at .../C4/Templates.pm line 132.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When viewing the logs, the user can see module and action,
such as "SYSTEMPREFERENCE", "MEMBERS" or "CREATE", "MODIFY", etc.
These texts are not translatable.
This patch allows translating those. It also adds the missing "CREATE"
action to the pulldown.
To test:
1) Go browse the system logs. Note the contents of the "Action" and
"Module" -pulldowns, and the contents of those columns in the log table.
2) Apply patch
3) Go browse the system logs again. The pull-downs should work, and
show the same values as before (plus "Create" for Action), and the
Action and Module -columns in the log table should not be in ALL CAPS.
4) cd misc/translator
5) perl translate update xx-YY
6) Check that the po/xx-YY-i-staff-t-prog-v-3006000.po contains the
values for the pull-downs in it. (Look for eg. "System prefs")
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Trim leading and trailing whitespace in the text generated
by the translate_card_element block to avoid generating
unescaped multi-line strings, which breaks the JavaScript
To test:
[1] Test actions in the patron card creator that generate
JavaScript alerts, such as hitting the delete button
without first selecting a batch or profile.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
1) cd misc/translator
2) perl translate update xx-YY
3) check that there's no msgid that contains the patron card label
element title texts in po/xx-YY-i-staff-t-prog-v-3006000.po
4) apply patch
5) perl translate update xx-YY
6) check po/xx-YY-i-staff-t-prog-v-3006000.po that it contains the
msgid. (search for "BLOCK translate_card_element")
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. Tested updating po file, translating and installing
language, checked on tools page.
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The code introduced by bug 2546 uses an undefined variable (line.title).
It should be ACCOUNT_LINE.title.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
1) Create an account with lots of different charges, fines, fees, etc.
2) Look at the accounts tab in the prog OPAC theme
3) Compare the page to bootstrap theme
4) Verify display is now the same
In my tests I found some things that could still be improved,
but for the goal is to make all OPAC themes behave the same.
Signed-off-by: Marc Véron <veron@veron.ch>
Tested by changing accounttype in table accountlines to all possible
values like Pay, Pay00, Pay01 etc. Both themes display the same values,
e.g. "Payment, thanks (cash via SIP2)" for Pay00
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Prior to this patch, the column for displaying the action links
was too narrow, leading to an ugly display. This patch groups
"action" links into a menu as was done with Bug 11763.
This patch also converts the date column sorting configuration to use
header class instead of an index.
This patch also corrects a couple of HTML markup errors: An
improperly-closed <input> and an improperly closed <option>.
To test, view the invoices page and confirm that the "Actions" menu
button works corectly. Test the functionality of each menu options:
Details, Close, Reopen, and Delete. Confirm that sorting by billing date
still works correctly.
Much nicer user interface. Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) View some records with authorities
4) Note your previously set authority separator should still be in use
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The "Creators" tab in the system preferences editor had only one
preference. In order to consolidate the display as well as to
address the issue that "creators" doesn't have much of a connection
to "patron cards", the ImageLimit system preference is moved to
the Tools tab by this patch.
To test:
[1] Verify that the ImageLimit preference now shows up in the
Tools tab in the system preference editor (along with an
existing Tools preference, MaxItemsForBatch.
[2] Verify that the sysprefs editor no longer has a "Creators"
tab.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
TEST PLAN
---------
1) Set opacthemes system preference to prog
2) In OPAC, click 'Advanced search'
3) Click 'More options'
4) Check the Keywords dropdown for duplicate 'Standard number'
5) Apply patch
6) Refresh page, and make sure 'More options' is clicked still
7) Check the Keywords dropdown for duplicate 'Standard number'
-- it's not this time
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described on prog theme, no more duplicate.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes the duplicate 'Standard number' option
under the more options of the OPAC advanced search correctly
following updates from Katrin.
TEST PLAN
---------
1) Set opacthemes system preference to bootstrap
2) In OPAC, click 'Advanced search'
3) Click 'More options'
4) Check the Keywords dropdown for duplicate 'Standard number'
5) Apply patch
6) Refresh page, and make sure 'More options' is clicked still
7) Check the Keywords dropdown for duplicate 'Standard number'
-- it's not this time.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In bootstrap opac-auth.tt, the link to "Home" in breadcrumbs leads
to #, it should lead to opac-main.pl like in all other pages.
Test plan :
- Use boostrap opac theme
- Go to cgi-bin/koha/opac-user.pl when not logged
=> without patch, clicking on Home does not change the page
=> with patch, clicking on Home leads to opac-main.pl
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Link ok, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There are three instances of incorrectly-capitalized "Patron Attributes"
on the patron import page. This patch corrects them.
To test, view the patron import page (Tools -> Import patrons). Confirm
that instances of the phrase "patron attributes" in the bottom-most
fieldset are correctly capitalized.
Followed test plan, works
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
[1] Check an item that belongs to a restricted patron and
specify a non-default return date.
[2] Verify that the warning message contains "restricted"
rather than "retricted".
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Patch applies and makes sense. (I have not checked the actual UI,
but that should not be necessary for such a simple typo correction.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This updates the basket help.
To test:
* Open a basket
* Click help and confirm it's right and there
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Help ok
Final comment: koha-qa complains about tabs, removed in followup
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates 3 help files.
To test:
* Visit Administration > Patron Categories
* Click help
* Confirm it's there and right
* Visit Administration > Currencies
* Click help
* Confirm it's there and right
* Visit Administration > Circ Rules
* Click help
* Confirm it's there and right
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Help ok. One comment: on circ rules, I think that "you're" can
be correct, but I prefer "you are"
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a few new values to the authorized values help
To test:
* Visit Administration > Authorized Values
* Click help
* Confirm help is there and correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New values ok
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Updates the 2 notices help files with new info.
To test:
* Visit Tools > Notices & Slips
* Click help and confirm it's there and right
* Visit Tools > Overdue notices/status triggers
* Click help and confirm it's there and right
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Long help ok
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the search help file.
To test:
* Visit Search
* Click help
* Confirm help is there and correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Help ok
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a bit to the addbiblio help file.
To test:
* Go to Cataloging
* Click add new
* Click help
* Confirm help is there and correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Help is ok
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This updates the patron help file and adds a missing help file.
To test:
* Go to a patron record
* Click help and confirm text is correct
* Go to patron's purchase suggestions
* Click help and confirm that help file is there and correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both text are correct, link still points to 3.14 manual, but depends
on a value that must change with new release.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the check in help (the only change for 3.16).
To test:
* Visit Circulation > Check in
* Click Help
* Confirm that help text is right
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Help is right
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
[1] View, in the staff interface, a record with alternate holdings
(as controlled by the AlternateHoldingsField system preference).
[2] Verify that the HTML list is closed correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Due dates in the self checkout module don't display the time items are
due, and thus items which are on hourly loans don't display an accurate
due date and time. This patch corrects this by adding the "as_due_date
=> 1" parameter added by Bug 9723.
To test, apply the patch for Bug 9723 if necessary. Enable an hourly
loan period for an itemtype in your collection. Log into the
self-checkout system and check out an item which circulates by the hour.
The due date and time should be displayed correctly.
Check out an item which does not circulate hourly. The due date should
be displayed as a date only.
Test in both prog and Bootstrap themes.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch tries to improve the code for the cleanborrowers.pl tool.
- use KohaDates plugin and Koha::DateUtils for date management,
removing a dependency on C4::Dates
- replace variables step1, step2 and step3 with step
- add a JavaScript check if no action if checked
Test plan:
- Backup your DB
- Play with the Patron deletion/anonymisation tool and try to find
something inconsistent.
If you don't find something different, it works!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Due dates in the OPAC don't display the time items are due, and thus
items which are on hourly loans don't display an accurate due date and
time. This patch corrects this by adding (and using) a new "as_due_date"
option to the KohaDates plugin made possible by Bug 11148.
Thanks to Galen for providing the changes to KohaDates.pm.
To test, enable an hourly loan period for an itemtype in your
collection. View the display of date due on the following pages:
- Patron details (opac-user.pl) - Log into the OPAC as a user who has
something checked out which circulates by the hour.
- Bibliographic details (opac-detail.pl) - View the details for an item
which is circulates by the hour and is checked out.
- Course reserves details (opac-course-details.pl) - View the contents
of a course reserve, one of which should be an item which circulates
by the hour and is checked out.
Due dates for hourly items should show both date and time and be
formatted correctly. Due dates for non-hourly loans should show only the
date. Test in both prog and Bootstrap themes.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
All templates in the staff client now load the DataTables jquery plugin
through a single include file, datatables.inc, which points to a copy of
the plugin in intranet-tmpl/lib/jquery/plugins. This patch removes the
unused copy of the plugin found in intranet-tmpl/prog/en/lib/jquery/plugins.
To test, search the Koha source for references to
jquery.dataTables.min.js. There should be no files which point to the
redundant file.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The qTip jQuery plugin is not longer used anywhere in Koha. This patch
removes it.
To test, apply the patch and search the Koha source for references to
the plugin. There should be none.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Something changed somewhere (maybe a new jQuery or datatables version)
and the javascript that redrew the table row after a new quote was saved
stopped working. This fixes the call to the datatables function so that
it matches the API.
Note that although the new quote didn't appear to be added, reloading
the page shows that it had been.
To test:
* Go and add a quote.
* Note that when you press enter after finishing the quote, the line
stops being an editor, and becomes just a display, like it should.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Serial receiving was broken when "create an item record when receiving
this serial" is used for the subscription. This bug was introduced by
the patch for bug 12138.
Signed-off-by: Pasi Kallinen <pasi.kallinen@pttk.fi>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 2060 renames columns num_biblios with num_records in the
import_batches table. The addorderiso2709 files had not been fixed.
Test plan:
Add an order from a staged file to a basket and verify the "# Bibs"
columns is correctly filled. Before the patch, the column was empty.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There is a typoed "f" outside of the HTML on line 279 of
koha-tmpl/intranet-tmpl/prog/en/modules/acqui/parcel.tt
This patch removes that extra "f".
To test:
It should be sufficient to look at line 279 before and after the
patch has been applied.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When searching (at the OPAC or pro), facets can be enabled but never
disabled. So a user is obliged to relaunch the search.
This patch adds a new link "[x]" at the right of each selected facet.
This link relaunch the search without this facet.
Test plan:
- Launch a search (OPAC and pro)
- Enable some facets
- Disable some facets
Signed-off-by: sonia bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patches pass all tests and QA script. Nice feature!
Tested in Boostrap and Prog, adding end removing multiple
facets in different sequences, adding and removing the
availability limit.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The original patch did not correctly construction ISBN phrase
searches when QP is on. Unfortunately, when attempting to fix that,
I discovered that there's a deep bug in QP that makes it generate
incorrect search queries when combining more than two atoms
in with the || operator. Consequently, until that can be fixed,
this patch ensures that if UseQueryParser is on, AggressiveMatchOnISBN
has no effect.
To state it anther way, AggressiveMatchOnISBN works only when QP
is not in use.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Catalog a record with the ISBN "0394502884 (Random House)"
2) Export the record, edit it so the ISBN is now
"0394502884 (UnRandomHouse)"
3) Using the record import tool, import this record with matching
on ISBN.
4) You should not find a match
5) Apply this patch
6) Run updatedatabase.pl
7) Enable the new system preference AggressiveMatchOnISBN
8) Repeat step 3
9) The tool should now find a match
Signed-off-by: Tom McMurdo <thomas.mcmurdo@state.vp.us>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Records hidden with OpacSuppression are filtered from the search
results, but the opac-detail page is still visible if you know the
biblio number. This patch hides the detail page for suppressed biblios
by redirecting (controlled by the syspref OpacSuppressionRedirect)
either to opac-blocked (default), explaining that the record is blocked
(including optional explanatory text from the syspref
OpacSuppressionMessage) or to Koha's 404 page, giving no hint that a
biblio with that number exists in the system.
Test plan:
Make sure you have at least one record with 942$n == 1.
Set OpacSuppression to "Don't hide".
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is found.
Open the detail page for the record.
Observe that it is accessible. Copy the URL for later(!).
Set OpacSuppression to "Hide".
Leave OpacSuppressionByIPRange blank.
Set OpacSuppressionRedirect to "an explanatory page ('This record is
blocked')."
Leave OpacSuppressionMessage blank for now.
Disable queryparser(!) (because of bug 10542).
Do a full zebra reindex.
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is not found.
Open the opac-detail URL of the record (the one you copied before).
Observe that you are redirected to opac-blocked and it displays a
short standard message.
Edit OpacSuppressionMessage and input some text.
Open the opac-detail URL of the record again (the one you copied
before).
Observe that the text you entered in OpacSuppressionMessage is
displayed under the standard text you have seen before.
Set OpacSuppressionRedirect to "the 404 error page ('Not found')."
Open the opac-detail URL of the record again (the one you copied before).
Observe that you are redirected to Koha's 404 error page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
At the OPAC, if the bootstrap theme is used, the modal
dialog does not allow to use the CAS authentication.
This patch proposes, in case CAS is enabled, to
redirect to the opac-user.pl page (like prog theme).
This is because the popup content should stay small
(thinking about mobile surf), and that CAS url is
actually only computed in opac-user (see C4/Auth.pm)
and it would not be performant to compute it in all
pages.
Test plan:
- set syspref opacthemes to bootstrap
- enable the casAuthentication syspref
- fill the casServerUrl syspref with something like:
https://localhost:8443/cas
- go on the opac home page
- click on "Log in to your account" link (top right)
=> You go to cgi-bin/koha/opac-user.pl page where you
see the cas link
- disable the casAuthentication syspref
- go on the opac home page
- click on "Log in to your account" link (top right)
=> You see a popup for login and password
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Normal login still works with/without CAS.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes the use of POSIX::strftime which is based on the
locales of the system.
The DateTime module translates month and day name with success, without
any locale installed.
For the saesons, I use the way used in Koha: write the word in
templates. On this way the translate script will match them and allow
translators to translate them.
This patch adds a regression: the season names are not translated
following the locale selected.
This could be done when bug 8044 will be pushed.
Test plan:
0/ Update your po files and translate the season name.
1/ Create a numbering pattern using season.
example:
Name: Seasonal
Numbering formula: {X}
X: Season, Add=1, Every=1, Set back to 0 when more than 3, formatting
"name of season"
And test the prediction pattern with:
frequency: 1/3 month
First issue : 2013-09-21
length: 12 months
X begins with 2 (21th Septembre is Fall)
2/ Click on the test pattern button, you should get:
Fall 21/09/2013
Winter 21/12/2013
Spring 21/03/2014
Summer 21/06/2014
Change the locale and verify the season names are *not* translated.
Change the Koha language and verify the season names are translated.
3/ Create a numbering pattern using day or month name.
example:
Name: day
Numbering formula: {X}
X: day, Add=1, Every=1, Set back to 0 when more than 6, formatting "name
of day"
Frequency: 1/day
First issue: 2013-11-18
length: 1 month
X begins with 0
You should get:
Monday 18/11/2013
Tuesday 19/11/2013
Wednesday 20/11/2013
[...]
Sunday 15/12/2013
Monday 16/12/2013
Tuesday 17/12/2013
change the locale and verify the day names are translated.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Tested on top of Bug 11265 and Bug 11263,
and solved merge conflict
Updating PO file gives seasons to translate.
Tested using seasons, day and month
Only note is different behavior
1) To use seasons you need to use staff in desired language
2) To use day and month only need to select locale
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No regressions found. Passes koha-qa.pl, t and xt
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested this again on top of 11263 and it works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The locales list for subscriptions should not be retrieved from the
locales of the system.
This patch retrieves the locales list from the Koha DB (in the same way
as pref language and opaclanguages).
Test plan:
Edit a subscription (or a numbering pattern) and verify the list of
languages is the same as languages available in Koha.
Note: with this patch we loose the saeson translation, it is
normal. See report linked.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors.
New locale is retrieved from installed languages.
I wonder if that list can be restricted to
'enabled' ones (parsing syspref language value).
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and all tests.
Works according to description.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a variable to the template, "protocol" based on
whether "using_https" is set. The appropriate protocol is
inserted before social media links.
To test, confirm that OPACBaseURL is set and lacks "http(s)://"
Social media links should include correct URLs.
A follow-up patch could copy use of this [% protocol %] variable
in other parts of this template which duplicate large chunks of
HTML based on [% using_https %].
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
see test plan for previous patch, only bootstrap theme instead of prog. :)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This switches the URLs used to access Amazon's cover images to the
SSL image server, preventing warnings when using this on a secure
site.
To test:
* Enable Amazon images in the sysprefs, all other cover images off.
* Do a search in the staff client. Using firebug or similar, inspect the
images that indicate both "no image found" and the covers.
* Are they all https, and showing correctly?
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It's probably going to become more popular to run Koha in SSL
environments.
Currently on SSL, with Amazon images enabled, a SSL enabled site
will either not show Amazon images (IE, some versions of Firefox?),
or show a warning to users about mixed secure and insecure content
(Firefox, Chrome).
Since we now have the using_https template variable, it makes sense
to use it.
To test:
In each browser you have access to, and preferably with SSL set up
(you can set up a self signed cert for your dev install by following,
more or less, the instructions here:
https://wiki.debian.org/Self-Signed_Certificate)
For the apache config, just copy the one for the OPAC, but set it to
use 443 instead of 80 for the port, and point it to your keys per the
instructions above.
** note that using a self signed cert on your dev install will prompt
you when you connect the first time that OMG I CAN'T VERIFY THIS IS
COOL. You did it yourself, if you can't trust yourself... then who can
you trust?
* Enable Amazon images in the system preferences
* Do a search that you know will have images for, verify that without
SSL
1. the images show
2. the image source is from an Amazon url that uses http://
3. the images are the right size, and look ok
* Do the same using https, verify that with SSL
1. the images show
2. the image source is from an Amazon url that uses https://
3. the images are the right size, and look ok
Clicking on the image should link to the item on Amazon. This patch
also corrects a problem with the Amazon URL used on the images -
it was pointing to a feature that is currently unavailable. That's
fixed here. All you need to check is that it goes to a valid Amazon
endpoint that doesn't show an error.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
0) It goes without saying that images being looked at should
continue to be the proper size and look ok.
1) In the staff client, change the OPAC system preference
opacthemes to 'bootstrap'.
2) Enable Amazon images in the system preferences
3) Issue a book you know will have images for a known user
4) Issue a book you know will have images for intentionally
overdue for the same user
5) git reset --hard origin/master
6) In OPAC, log in as the user.
-- On the 'your summary' tab on the left (which is default),
a) In the 'Checked out' tab, there should be at least two
books. The two books issued should have http images.
b) In the 'Overdue' tag, there should be at least one
book. The image for the overdue book issued should
have http images.
7) Click the 'your reading history' tab on the left.
-- The images for the two books issued should have
http images.
8) Apply the patch
9) Repeat steps 6-7, but all the images in question should
have https images now.
10) In the staff client, change the OPAC system preference
opacthemes to 'prog'.
11) Repeat steps 5-9
12) Run the koha QA test tool
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Checked reading history, overdoes, and checkouts in
bootstrap and prog OPAC. Amazon image URL is now https://.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This followup fixes a couple of issues:
- disable the feature by default.
- use the datatables include file.
- fix the syspref description.
- replace "History search" with "Search history".
- replace biblio with catalog
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like OPAC, the search history is now available for intranet. This
is controlled by the EnableSearchHistory system preference.
Test plan:
1/ Switch on the 'EnableSearchHistory' syspref.
3/ Launch some biblio and authority searches.
4/ Go on your search history page (top right, under "Set library").
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changed the tabs from Catalog and Authority to
Catalog searches and Authority searches to be a bit more specific.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Patch for the bootstrap theme
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This follow-up makes two changes:
1) Change "biblio" to "catalog" when referring to non-authority
searches.
2) Make display of the authority search tab dependent on the
OpacAuthorities system preference. If OPAC authority searches are
disabled we shouldn't show a tab which will always be empty.
To test, view the OPAC search history page with the OpacAuthorities
preference both on and off.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like biblio, this feature provides an authority search history.
This history is available for connected and disconnected user.
If the user is not logged in Koha, the history is stored in an
anonymous user sessin.
The search history feature is now factorized in a new module.
This patch adds:
- 1 new db field search_history.type. It permits to distinguish the
search type (biblio or authority).
- 1 new module C4::Search::History. It deals with 2 different storages:
DB or cookie
- 2 new UT files: t/Search/History.t and t/db_dependent/Search/History.t
- 1 new behavior: the 'Search history' link (on the top-right corner of
the screen) is always displayed.
Test plan:
1/ Switch on the 'EnableOpacSearchHistory' syspref.
2/ Go on the opac and log out.
3/ Launch some biblio and authority searches.
4/ Go on your search history page.
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Delete all your history (cross on the top-right corner)
11/ Check that all your history search is empty.
12/ Launch some biblio and authority searches.
13/ Login to your account.
14/ Check that all previous searches are displayed.
15/ Launch some biblio and authority searches.
16/ Check that these previous searches are displayed under "Current
session".
17/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All patches together pass QA script and tests.
Also, new tests in t/db_dependent/ pass.
Tested in all 4 OPAC themes, being logged in and anonymous.
Anonymous search history will be appended to personal search
history after logging in.
Also verified that cleanup_database still purges search history,
now also including the authority searchs.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script, t, xt and t/db_dependent/Members*.
Testing notes:
- Database update
* Changes to kohastructure match changes done by the updatedatabase
statement. Feature is activated by default!
* Ran database update succesfully.
* Note: Expired patrons are now blocked by default in new
AND in updated installations.
- System preference
* Verified system preference shows up correctly.
- Category configuration
* Add new patron category
* Edit existing patron category
* Delete patron category
* Check patron category summary table.
=> Verified all actions work as expected.
=> Verified chosen value for BlockExpiredPatronOpacActions
is always displayed and saved correctly.
* Note: The new value is missing from the summary table.
* Note: The new value is also not shown when deleting a patron
category.
- Check functionality
* Renew and place a hold for an NOT EXPIRED patron with
a) category: use syspref (default)
syspref: block (default)
b) category: use syspref (default)
syspref: don't block
c) category: block
syspref: don't block
d) category: block
syspref: block
e) category: don't block
sypref: block
f) category: don't block
syspref: don't block
Holds and renewals were always possible.
* Also verified that the warning from NotifyBorrowerDeparture
still shows up correctly.
* Verified holds and renewals are still blocked, when the
user has a restriction with a date in the future.
* Renew and place a hold for an EXPIRED patron with
a) category: use syspref (default)
syspref: block (default)
Holds and renewals blocked.
b) category: use syspref (default)
syspref: don't block
Holds an renewals possible.
c) category: block
syspref: don't block
Holds and renewals blocked.
d) category: block
syspref: block
Holds and renewals blocked.
e) category: don't block
sypref: block
Holds and renewals possible.
f) category: don't block
syspref: don't block
Holds and renewals possible.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Fixes a typo in one of the OPAC messages: "you account"
- Fixes the updatedatabase script to use 1 instead of yes for the
system preference default matching the sysprefs.sql file.
- Fixes capitalization "Don't Block" in system preference
description.
- Adding . to the end of the warning, when renewals are blocked.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some corrections :
- opac-reserve.tt : opening <p> instead of closing
- opac-user.tt : warnexpired was in database format, adds the use
of KohaDates template plugin
- opac-user.tt : duplicated TT test : [% IF ( BORROWER_INF.warnexpired ) %]
and [% ELSIF ( BORROWER_INF.warnexpired ) %], maybe a merge error
- opac-user.tt : <string> instead of <strong>, maybe for HTML 6 :-)
- opac-user.pl : adding dateformat var to template is already done by Auth.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Testing notes:
- Database update
* Changes to kohastructure match changes done by the updatedatabase
statement. Feature is activated by default. Fixing 'yes' to be '1'
in a follow up.
* Ran database update succesfully.
* Note: Patrons are now blocked by default in new installations
AND in updated installations.
- System preference
* Verified system preference shows up correctly.
- Category configuration
* Add new patron category
* Edit existing patron category
* Delete patron category
* Check patron category summary table.
=> Verified all actions work as expected.
=> Verified chosen value for BlockExpiredPatronOpacActions'
is always displayed and saved correctly.
* Note: The new value is missing from the summary table.
* Note: The new value is also not shown when deleting a patron category.
- Check functionality
* Renew and place a hold for an NOT EXPIRED patron with
a) category: use syspref (default)
syspref: block (default)
b) category: use syspref (default)
syspref: don't block
c) category: block
syspref: don't block
d) category: block
syspref: block
e) category: don't block
sypref: block
* Verified renewals and placing holds were never blocked.
* Also verified that the warning from NotifyBorrowerDeparture
still shows up correctly.
* Renew and place a hold for an EXPIRED patron with
a) category: use syspref (default)
syspref: block (default)
=> OK, both actions are blocked.
b) category: use syspref (default)
syspref: don't block
=> OK, both actions possible.
c) category: block
syspref: don't block
=> OK, both actions are blocked.
d) category: block
syspref: block
=> OK, both actions are blocked.
e) category: don't block
sypref: block
=> OK, both actions possible.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
2014-04-06 Update: Will repeat and amend above test plan on last patch in this series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* Hide renewal column, buttons and links
* Fixes minor bug where upper-right table links would show even if
renewal impossible
* Cleans up some of the template formatting ( whitespace changes only )
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
