Bug 15656 removed the C4::Members::GetMemberRelatives subroutine but the
module still exports it.
Test plan:
git grep GetMemberRelatives
should not return any results.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The pref is prefixed by 'http://', but it should not when the pref is
set to an empty string.
This will fix the bug raised on bug 14790 comment 14.
Test plan:
Empty OPACBaseURL and confirm that it's save as it in DB
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
OPACBaseURL is saved up empty. Prefix http:// is not saved anymore
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine is no longer in used and can be removed safely
Test plan:
git grep ModPrivacy
should not return any occurrences.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Although mainly hypothetical, it would still be possible to get
response from the server for an acs resend request. (This exception
is allowed in MsgType::handle.)
I also noticed that the response may well be a message from an older
session still.
This patch just removes that exception by only passing login requests
to sub handle in the raw_transport loop.
Test plan:
[1] Verify normal login procedure for raw.
[2] Check a few acs resend requests in raw. They should terminate without
a response.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Removed tabs and used spaces consistently
Used 'use base' to remove unnecessary BEGIN sub and
explicit setting of ISA at application level
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Moving timeout logic to one routine (with unit test).
This further implements two suggestions from Kyle and Larry:
[1] You could use a client_timeout of 0 to specify no timeout at all.
[2] Have the client_timeout default to the timeout if not defined.
Test plan:
[1] Run t/db_dependent/SIP/SIPServer.t.
[2] Test login timeout for raw and telnet.
[3] Check ACS status message for timeout value. Should match policy
timeout from institution.
[4] Test client timeout (zero and non-zero).
[5] Remove client timeout. Test fallback to service.
[6] Remove service timeout too. Test fallback to 30 at login.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended to incorporate Srdjan's suggestion to move get_timeout to
SIPServer.pm; this requires some additional mocking in the unit test.
And even makes the test db dependent, as documented.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Remove the tabs causing inconsistent indentation
of sip_protocol_loop and replace with spaces
Reimplements the renaining parts of Marcel de Rooy's
original QA patch
No logic changes in this patch - layout only
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
raw_connection was not behaving correctly if an invalid string was
passed or a login failed.
It was not checking that the login succeeded ( it checked that account
existed not that it contained data and it existed even if login failed)
and so failed logins instead of aborting immediately fell through into
the sip_protocol_loop, forcing that to timeout invalid connections.
It now checks that account has id set and returns if not.
The timeout alarm is now set on the while loop, in normal running this
should not be triggered as the socket is opened and the first data
should be a login message and the while loop should only iterate once,
but lets not go into an infinite loop due to unforeseen circumstances.
I have reindented the routine as the flow was not clear (the while was
not indented at all.
Also if using Net::Server::PreFork when a new connection comes in you
may be handed the the successful login parameters from a preceding call.
Because of this you could successfully transmit transactions and Koha
would carry them out without having received a valid login ( and
possibly with the wrong account details!) We now delete any existing
account for new connections.
NB: This patch requires that the patch for bug 13807 has been applied
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On the same way as late issues, the serial status should be updated to
'claimed' when the issues as exported as csv.
QA note: The updateClaim and UpdateClaimdateIssues subroutine did almost the
same thing, I kick the second on off to centralize the code.
Test plan:
1/ Export some late issues as CSV (serials/claims.pl).
2/ Refresh the page (the export does not do it) and confirm that the
status, the claim date and the claim count have been updated.
3/ Select some others issues, select a notice and send the notification.
Confirm that the behavior is the same.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Error:
DBIx::Class::Storage::DBI::_dbh_execute(): Column 'checkprevcheckout'
cannot be null at C4/Members.pm line 697
Test Plan:
1) Attempt to import a patron via csv
2) Note the error
3) Apply this patch
4) Repeat the import
5) No error!
NOTE: Given that all the other tests ran (comment #2), except
those in comment #3, I resorted to following the test plan
above using the attachment provided in comment #5. I
believe the issues in comment #3 constitute other bugs
which need fixing and are unrelated this bug. Applying the
patch does resolve the error triggered, and the code is
good.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Debugging various problems in SIPServer and control of it, found it
could loop on unread buffers (e.g. the LF of a CRLF if it was only
expecting CR) making it unresponsive to signals.
Reworked the input loop with an eye to removing unnecessary whiles
and replacing the while(1) by a while( connection valid)
Enhanced the timeout code by wapping in an eval.
Moved the logic from SIP_read_packet into the server itself
Hopefully this makes the already baroque code easier to navigate
and it did seem the server was the logical place for this
Removed no longer iused SIP_read_packet from Sip.pm
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes C4::Members::DelMember proprely use Koha::Holds to delete
holds. This is important as holds actions are started to be logged.
To reproduce:
- Apply the patch
- Run:
$ prove t/db_dependent/Members.t
=> SUCCESS: Tests pass
- Sign off :-D
Sponsored-by: NEKLS
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
All tests pass successfully
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
---------
1) Apply Jonathan's test patch
2) prove t/db_dependent/Letters.t
-- dies before finishing tests
3) Apply second test patch
4) prove t/db_dependent/Letters.t
-- dies before finishing tests
-- 'addalert' is changed to 'getalert'
5) Log into OPAC with database admin user.
-- see error given in comment #0
6) Apply this patch
7) prove t/db_dependent/Letters.t
-- says 'getalert'
-- all tests pass.
8) Log into OPAC with database admin user.
-- logs in, but gives warning with a nice logout button.
9) run koha qa test tools.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
No kaha qa errors
In debian display diferent error:
Can't use an undefined value as an ARRAY reference at /usr/lib/perl5/DBI.pm line 2054.
Works as advertised
NOTE: Revised test plan, as Jonathan added useful test case.
Works as I've tested above.
Hector tested older test plan which was steps
5,6,8 and 9.
Revised test plan again while tweaking to address comment #9.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This bug is the beginning of a conversion from our current bespoke
syntax for slips and notices to Template Toolkit syntax.
This patch is the initial seed which will evolve over time.
With this addition, we can take advantage of our Koha Objects
to greatly simplify the processing of Slips and Notices over time.
Test Plan:
1) Apply this patch
2) Ensure you have the default CHECKOUT notice
3) Check out and return an item for a patron
4) Note the text of the CHECKOUT notice
5) Replace your CHECKOUT notice with the following:
The following items have been checked out:
----
[% biblio.title %]
----
Thank you for visiting [% branch.branchname %].
6) Repeat step 3
7) Note the CHECKOUT notice text matches the previous CHECKOUT notice text
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New notice syntax works, no koha-qa errors
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Bug 14757 [QA Followup] - Change method type() to _type() for Koha objects
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Bug 14757 [QA Followup] - Change all references to Koha::Borrower to Koha::Patron
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Tools -> Staged MARC Management and clean a file. If you have no files to clean, go to 'Stage MARC for import' and upload one to clean following the necessary steps.
2) Confirm that once the file has been cleaned, the Action column now shows a Delete button. Confirm this button only shows for cleaned files.
3) Click the Delete button.
4) Confirm that clicking Cancel exits the pop-up message and does not delete the file.
5) Confirm that clicking OK refreshes the list of staged records and the one you just deleted is no longer on it (has been deleted). You can confirm this by checking for the file in mysql (SELECT * FROM import_batches WHERE import_batch_id = X;)
6) Run prove -v t/db_dependent/ImportBatch.t (have written unit tests for CleanBatch and DeleteBatch)
Sponsored-by: Catalyst IT
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Catalyst sign off, so needs another one but YAY this is great.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Koha/Patron.pm (wantsCheckPrevCheckout, doCheckPrevCheckout): Rename
to...
(wants_check_for_previous_checkout, do_check_for_previous_checkout):
...this.
* C4/Circulation.pm: Use new names.
* t/db_dependent/Patron/CheckPrevCheckout.t: Renamed to...
* t/db_dependent/Patron/Borrower_PrevCheckout.t: ...this.
Bug 6906: Fix POD reference to old method name.
* Koha/Patron.pm (wants_check_for_previous_checkout): Fix POD.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New feature: provide granular means to configure warnings about items
that have been issued to a particular borrower before, according to
their checkout history.
- Global syspref ('CheckPrevCheckout'), set to 'hardno' by default,
allows users to enable this feature library wide.
- Per patron category pref allows libraries to create overrides per
category, falling back on the global setting by default.
- Per patron pref allows switching the functionality on at the level
of patron. Fall-back to category settings by default.
* Koha/Patron (wantsCheckPrevCheckout, doCheckPrevCheckout): New
methods.
* C4/Circulation.pm (CanBookBeIssued): Introduce CheckPrevCheckout
check.
* admin/categories.pl: Pass along checkprevcheckout.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/categories.tt: Expose
CheckPrevCheckout per category setting.
* koha-tmpl/intranet-tmpl/prog/en/modules/preferences/patrons.pref:
Expose CheckPrevCheckout syspref.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt:
Expose per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember.tt: Expose
per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/circ/circulation.tt: Add
'CHECKPREVCHECKOUT' confirmation message.
* installer/data/mysql/kohastructure.sql: Modify structure of
'categories', 'borrowers', 'oldborrowers'.
* installer/data/mysql/sysprefs.sql: Add 'CheckPrevCheckout'.
* installer/data/mysql/atomicupdate/checkPrevCheckout.sql: New file.
* t/db_dependent/Patron/CheckPrevCheckout.t: New file with unit tests.
Test plan:
- Apply patch.
- Run updatedatabase.
- Regenerate Koha Schema files.
- Run the unit tests.
- Verify 'CheckPrevCheckout' is visible in Patrons sysprefs and can be
switched to 'hardyes', 'softyes', 'softno' and 'hardno'.
+ Check out previously checked out items to a patron, checking the
message appears as expected.
- Verify no 'Check previous checkouts' setting appears on the borrower
category pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on the borrower
category pages and can be modified per borrower category.
+ Issue previously issued items to a borrower, checking the message
appears as expected (This setting should override the default
setting if that is set to a 'soft' option).
- Verify no 'Check previous checkouts' setting appears on the individual
borrower pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on individual
borrower pages and can be modified.
+ Issue previously issued items to a borrower, checking the message
appears as expected (This setting should override the category
setting and the default setting if the latter is set to a 'soft'
option).
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The marc subfield structure is currently cached using a global variable
of C4::Context. The infos are retrieved every time a new context is
created.
This patch suggests to use Koha::Cache instead.
To achieve this goal, a new subroutine is created
C4::Biblio::GetMarcSubfieldStructure, it will be called from code which
needs to get the marc subfield structure. GetMarcFromKohaField,
GetMarcSubfieldStructureFromKohaField, TransformKohaToMarc and
_get_inverted_marc_field_map are modified accordingly and the cache is cleared
when the table is updated (from the 3 pl scripts modified by this patch).
The caching done in C4::Context (marcfromkohafield) is removed.
Test plan:
Play with the marc subfield structure (in the administration module),
then add and edit records and make sure everything went fine.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Everything works as expected on my functional tests. I'm really happy to see the
patch introduces relevant tests for previously untested functions.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch picks the item's holding branch *before* it gets fixed
by using the checkin library instead. This way the RefundLostOnReturnControl
syspref set to ItemHoldingBranch is respected (otherwise, as Nick explained
this behaves just like if CheckinLibrary was set)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch makes AddIssue and AddReturn use the new implementation
The behaviour should respect the specification.
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch introduces new classes for handling refund lost item fee
rules. It introduces a new table for storing this rules.
It is designed so it is possible to define a global rule, and then
branch-specific ones. The specific is prefered if available.
This behaviour is fully tested by unit tests introduced by the following patches.
This cannot be tested on its own.
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This module is no longer in use and can be removed.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
This part involves some changes in a bunch of mysterious debian|ubuntu
related files, not quite sure if I know what I'm doing
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
ooking at this code, you might think these subroutines are cached, but
actually they are not.
The eval surrounding the code hides a bug, if you remove it, you will
get:
Invalid memcached argument (expected a hash)
Test plan:
Do not apply this patch and confirm that the code does not work
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the shelves.pl (staff) and opac-shelves.pl scripts
use the new sysprefs for specifying custom XSLTs for lists display.
XSLT.pm is patched so it defaults to the corresponding *Results.xsl
files if none is specified.
To test:
- Create a list
- Open the list in the staff interface
- On a new tab, open the list in the OPAC.
- Apply this patches
=== default behaviour
- Open the list (both opac and staff) on new tabs
=> SUCCESS: They look exactly the same (hint: the syspref is set to ''
so it should fallback to using the one we were using.
=== using the new functionality
- Create custom XSLTs for lists, for example:
$ cd /home/vagrant/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/xslt
$ cp MARC21slim2OPACResults.xsl MARC21slim2OPACLists.xsl
- Edit your sysprefs, setting OPACXSLTListsDisplay to:
/home/vagrant/kohaclone/koha-tmpl/opac-tmpl/bootstrap/{langcode}/xslt/MARC21slim2OPACLists.xsl
- Reload the OPAC list view
=> SUCCESS: Looks exactly as before
- Make some minor tweak (for example in line 423 replace
<xsl:text> </xsl:text>
for
<xsl:text> BLAH </xsl:text>
- Reload the list
=> SUCCESS: BLAH shows in several places on the title.
- Repeat for the staff interface
- Sign off :-D
So we can now set custom XSLTs for lists.
Sponsored-by: Carnegie Stout Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Deb Stephenson <DStephen@dubuque.lib.ia.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 13622 has introduced a bug, if pref TimeFormat is 12hr and a date is
displayed in both title and content of the letter.
Test plan:
1 - Checkout an item (with default time 11:59:00 PM)
2 - Generate a quickslip
3 - Notice the time is 'AM'
4 - Apply patch
5 - Generate quickslip
6 - Note time is correct
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an attacker can get an authenticated Koha user to visit their page
with the code below, they can update the victim's details to arbitrary
values.
Test plan:
Trigger
/cgi-bin/koha/opac-memberentry.pl?action=update&borrower_B_city=HACKED&borrower_firstname=KOHA&borrower_surname=test
=> Without this patch, the update will be done (or modification
request)
=> With this patch applied you will get a crash "Wrong CSRF token" (no
need to stylish)
Do some regression tests with this patch applied (Update patron infos)
QA note: I am not sure it's useful to create a digest of the DB pass,
but just in case...
Reported by Alex Middleton at Dionach.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To make sure the return can be done, AddIssue must not trust callers (they
should have done their job, but we are not sure) and check that the issue can
be returned before issuing to the patron.
There is no test plan here, this should not be possible from the Koha
interface.
However, looking at the code, it may be possible using SIP.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an issue is already checked out, CanBookBeIssued must check if the
issue can be checked in before processing the return.
In such cases (depending of the AllowReturnToBranch pref), the issue
should not be allowed.
Prior to this patch, the checkin was not done and the checkout failed
with "Duplicate entry '1204321' for key 'itemnumber'". Indeed since bug
14978, there is an uniq key on issues.itemnumber. Before bug 14978 the
issue existed but was hidden (and some weird behaviors certainly
happened!).
To avoid Koha to crash, a check is added to CanBookBeIssued (call to
CanBookBeReturned) and the librarian is not able to process the
checkout.
Test plan:
- Set AllowReturnToBranch to anywhere
- Check an item (homebranch Library 1, holding branch Library 1) out from Library 1
- Check the item out from Library 2
=> Confirm the checkout (should work with and without this patch)
- Set AllowReturnToBranch to holdinbranch ("only the library the item
was checked out from").
- Check an item (homebranch Library 1, holding branch Library 1) out from Library 1
- Check the item out from Library 2
=> Without this patch, Koha crashed
=> With this patch, you will be warned that the checkin is not possible.
Try other combinations of the AllowReturnToBranch syspref
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
An improper method call was left over in C4::Serials::NewIssue from the
switch from DBIx::Class to Koha::Object.
Test Plan:
1) prove t/db_dependent/Serials.t
2) Note the errors
3) Apply this patch
4) prove t/db_dependent/Serials.t
5) No errors!
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
With the global %default_values_for_mod_from_marc variable, the changes
made to the marc_subfield_structure table and especially the links
between MARC and DB fields are not safe and might be outdated (if a
field is linked/unlinked)
Test plan:
Under Plack:
- Link the barcode field, edit a record and set a barcode.
- Remove the mapping for the barcode field and then update again the
barcode of the record.
The items.barcode DB field must not have been updated.
Without this patch, the field should have been updated.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Added a new sub to Serials.pm to be able to get serials with their statuses.
Now the sub ModSerialStatus checks for other serials with an "expected" status before doing anything.
Also modified Serials.t to be able to test those changes.
Test Plan
1) Apply patch
2) Run ./t/db_dependent/Serials.t
3) Validate that there are no errors
4) Go on "Serial collection information" page for a serial of your choice
5) Click on "Generate next"
6) Change the status of the original serial from "late" to "expected"
7) Change the newly generated serial from "expected" to "delete"
8) Validate that there are no new serials created by instruction 7 and that the serial was deleted
9) Run ./t/db_dependent/Serials.t
With QA Fixes
- Use the constant instead of the code (1 vs EXPECTED)
- Avoid interpolation in query
- use selectall_arrayref instead of fetchall_arrayref
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Serials -> Manage numbering patterns
2) Create .New Numbering Pattern.
3) Type in a name of 'Day, Month, Season' and a numbering formula of '{X} {Y} {Z}'.
4) Set up the X field as following: add 1, every 1, set back to 1, when more than 30.
5) Select the formatting for X. There should be six options available instead of the original three. Use the formatting 'Name of Day (abbreviated)'.
5) Set up the Y field to add 1 every 30 reset back to 1 when more than 12. Use the formatting option 'Name of month (abbreviated)'.
6) Set up the Z field to add 1 every 90 reset back to 1 when more than 4. Use the formatting option 'Name of season (abbreviated)'.
8) Select a frequency of 1/day.
9) Select a first issue publication date of Jan 1, 2016.
10) Set X to begin with 5 and have an inner counter of 5. Set Z to begin with 3 and have an inner counter of 10.
11) Click the 'Test Pattern' button.
12) Abbreviated versions of the day, month and season should appear in the test pattern.
Signed-off-by: sonia bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Added optional dependency, so as to explain why testing
explodes when the Enhanced Content system preference
TagsExternalDictionary is set. It is optional, because not only
does TagsExternalDictionary have to be set, but TagsEnabled
must be 'Allow'.
Also tweaked C4/Tags.pm to ignore TagsExternalDictionary,
if Lingua::Ispell is not installed. A warning is given.
TEST PLAN
---------
1) Set the Enhanced Content system preference
TagsExternalDictionary to /usr/bin/ispell
2) sudo apt-get install liblingua-ispell-perl
-- should be a new install
3) prove t/db_dependent/Tags.t
-- should work fine
4) sudo apt-get remove liblingua-ispell-perl
5) prove t/db_dependent/Tags.t
-- should explode
6) Clear the Enhanced Content system preference
TagsExternalDictionary
7) prove t/db_dependent/Tags.t
-- should work fine
8) apply patch
9) prove t/db_dependent/Tags.t
-- should work fine
10) Set the Enhanced Content system preference
TagsExternalDictionary to /usr/bin/ispell
11) prove t/db_dependent/Tags.t
-- should work, with warning.
12) sudo apt-get install liblingua-ispell-perl
13) prove t/db_dependent/Tags.t
-- should work fine
14) run koha qa test tools.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Post-hackfest hotel Olympia lobby signoff. Kalimera!
Works as expected.
At this moment the Tags.t test does not need the database btw,
but the module should have much more test coverage.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Initialize file level lexicals each call. Do not call _initialize
outside the module.
Adjust test by mocking preferences.
Test plan:
Run t/db_dependent/External_BakerTaylor.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested module with trivial script under Plack/memcached by toggling
the associated preferences.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since the tests are expecting an initialize function, the
initialize call was just moved outside of the INIT block.
TEST PLAN
---------
1) prove t/00-load.t
-- warnings about INIT for BakerTaylor
2) prove `git grep -l BakerTaylor | grep [.]t$`
-- should all run okay
3) apply patch
4) repeat steps 1 and 2
-- warning should be gone, and everything else run okay
5) run koha qa test tools
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Florent Mara <florent.mara@gmail.com>
NOTE: Tweaked test plan based on comment #4,
Added sign off based on comment #6.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] $branch is only related to line 123 as fallback.
[2] $width moved to a constant; sub width is not used.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested the corresponding plugin in item editor.
Test t/db_dependent/Barcodes.t and Barcodes_ValueBuilder.t still pass.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
According to http://perldoc.perl.org/vars.html, "our" should
be a reasonable substitute for the "use vars". By declaring as
"our", and removing the INIT, prove t/00-load will no longer
generate a warning about INIT for the C4/Barcodes/hbyymmincr.pm
module.
TEST PLAN
---------
1) prove t/00-load.t
-- warnings about INIT for hbyymmincr
2) prove `git grep -l hbyymmincr | grep [.]t$`
-- should all run okay
3) apply patch
4) repeat steps 1 and 2
-- warning should be gone, and everything else run okay
5) run koha qa test tools
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14507 introduced the use of checkpw in C4::SIP::ILS::Patron so that
non-Koha internal authentication processes would be able to function via
SIP ( LDAP et al ).
The problem is that checkpw changes the userenv to that of the patron!
This is not usually an issue in Koha because most of the time that
patron running through checkpw is the one to be logged in.
Aside from SIP2 the only other area where this may be an issue is in SCO
when using SelfCheckoutByLogin.
Test Plan:
1) On master, check out an item to a patron via SIP2
2) Note the checkout lists the item as having been checked out
from the patron's home library not matter which library is was
supposed to be checked out from.
3) Apply this patch
4) Re-checkout the item
5) The item should now be checked out as if it was checked out from
the library as defined in the SIP configuration file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Looking at
http://cpansearch.perl.org/src/DROLSKY/Exception-Class-1.40/Changes
there is no need to require 1.39
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
