Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the doc of C4::Ratings, it was written that the rate values should be
>=0 and <=5, but it was not taken into account.
This bug should be fixed on stable releases as well.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rewrite and move the tests.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutines in C4::Ratings are only CRUD operations.
This patch set moves the entire module to Koha::Rating[s] based on
Koha::Object[s]
Test plan for the whole patch set:
0/ Set OpacStarRatings to "results and details"
1/ Log in at the OPAC
2/ Launch a search, you should see the star ratings
3/ Go on a detail page, you should see the star ratings
4/ Rate the record
5/ Log in with another patron
6/ Go on the same detail page, you should see the previous rating
7/ Rate the racord, you should see "2 votes" and the average rating
value.
8/ Cancel your rate
9/ Disable JavaScript and repeat 7
Note: You cannot cancel your rate if JavaScript is disabled (not a
regression).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the --quiet option switch in koha-common.init so
problem information is not hidden for sysadmin users.
To test:
- Have plack enabled for a koha instance:
$ sudo koha-plack --enable kohadev
$ sudo koha-plack --start kohadev
- Run:
$ cd kohaclone
$ debian/koha-common.init {start|stop|restart}
=> SUCCESS: No behaviour change
- Disable the 'cgi' apache module:
$ sudo a2dismod cgi
- Run:
$ debian/koha-common.init {start|stop|restart}
=> FAIL: No warning is shown
- Apply the patch
- Run:
$ debian/koha-common.init {start|stop|restart}
=> SUCCESS: Warnings show up
- Sign off :-D
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Perfect thanks :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
A description of --adminuser was missing from debian/docs/koha-create.xml
This patch adds a description in the Options section, as well as under
DEFAULTSQL in the list of configuration variables.
To test:
Run these commands and look at the formatted man page:
$ xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \
debian/docs/koha-create.xml
$ man -l koha-create.8
Make sure this test passes:
$ prove -v xt/verify-debian-docbook.t
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Edited commit message to fix typo - koha-mysql -> koha-create as that's what we're testing. :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended the patch to adjust a typo: ndex should be index.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Shut down the Plack server.
2) The OPAC and staff side homepage should still load (as it is
mistakenly being loaded via CGI).
3) Apply patch.
4) Both homepages should now not load.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
From qa tools:
reports/cat_issues_top.pl: pod: =over on line 39 without closing =back
Note: qa tools does also report "options_for_libraries: not found" on two
template includes. Considering this as a false alarm, since the block is
defined in another include loaded in doc-head-open.
[1] koha-tmpl/intranet-tmpl/prog/en/includes/subscriptions-search.inc
[2] koha-tmpl/opac-tmpl/bootstrap/en/includes/opac-topissues.inc
Found a template where a USE Branches was missing:
koha-tmpl/intranet-tmpl/prog/en/modules/serials/subscription-add.tt
Easy to spot since the libraries combo was empty.
Tried to find similar occurrences with few greps, but couldn't find any.
I did find duplicate USE Branches though in:
koha-tmpl/intranet-tmpl/prog/en/modules/admin/smart-rules.tt
koha-tmpl/intranet-tmpl/prog/en/modules/serials/checkexpiration.tt
This patch removes them.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] C4/Search
A call to Koha::Libraries is added to routine pazGetRecords, but the
results of that call are not used. So removing it again.
[2] catalogue/itemsearch.pl
Although A=>B=>C=>D works, we'd better use here A=>B, C=>D.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Acquisition.pm
The lines filling $row in GetBasketGroupAsCSV may have side-effects when
the library name is not found. This change restores former behavior. Just
theoretically more safe.
Note that it also contained a typo: $row->{deliveryplace} should have been
$row->{$place}.
[2] Auth.pm
checkauth: $branchname = Koha::Libraries->find($branchcode)->branchname;
Should normally be fine, but I rather have an empty string here than
crashing on "Can't call method branchname on undefined value".
Same for sub check_api_auth.
Note that this holds for a larger number of calls, but I am adding a check
here because it is checkauth.
Also removed a duplicate use Koha::Libraries-statement.
[3] Search.pm
Also removed a duplicate use statement for Libraries.
[4] svc/holds
Added an (explicit) use statement for Koha::Libraries.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Hard to miss that one:
Template process failed: plugin error - Bareword "C4::Branch::onlymine" not allowed while "strict subs" in use at Koha/Template/Plugin/Branches.pm line 59.
Compilation failed in require at /usr/lib/perl5/Template/Plugins.pm line 206.
Removed OnlyMine from Plugin/Branches. Replaced by a template var in
cleanborrowers; it was used only once.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Does not make sense to call first in list context and later in scalar
context.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
One of the patches removed %cathash. Some kind of silly remainder
was left in a string. Just used as a text field to explain the
filters used on borrowers_stats.pl. The filter name cathash is not
really easy and also was confusing in relation to the variable.
So just a string patch, replacing it with Patron category.
NOTE: The output of borrowers_stats.pl with the filters listed, is
not one of the most beautiful Koha screens.
Furthermore, translatibility of these filters is still an issue to
be handled on another report.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Categories.GetName should not have been removed in the previous patch
(merge conflict issue).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This unnecessary complicated subroutine returned an arrayref and an
hashref of the patron categories available for the logged in user, for a given
category_type, ordered by categorycode.
This can now be done with the search_limited method.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to other
libraries. They should be ordered as before this patch, by categorycode.
- Add/edit a patron, change his/her patron category value.
- On the 3 following reports:
reports/bor_issues_top.pl
reports/borrowers_out.pl
reports/cat_issues_top.pl
The display for these 3 reports are different than the 2 from the first
patch (borrowers_stats.pl issues_avg_stats.pl): they are ordered by
categorycode and the ones limited to other libraries are not displayed
(should certainly be fixed).
Note that the big part of this patch has already been tested before
(update child related: CATCODE_MULTI).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Members::GetBorrowercategoryList returned all the patron categories,
ordered by description.
This can be done using the search method of the Koha::Patron::Categories
module.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to other
libraries. They should be ordered as before this patch, by description.
- On the "patron attribute types" admin page (admin/patron-attr-types.pl).
- On the "Batch patron deletion/anonymization"
(tools/cleanborrowers.pl), the dropdown list should be filled
correctly.
- On the import patron tool
- On the following report:
reports/reserves_stats.pl
Confirm that the patron categories are displayed and that the report
still works as before.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The purpose of C4::Members::GetBorrowercategory was to return the patron
category for a given categorycode. This can be done easily with the
Koha::Patron::Categories->find method.
Test plan:
- Same prerequisite as before
- Edit a guarantor and confirm the information will be updated for his/her
guarantee(s).
- Update a child to adult patron (Note: Should not we hide the patron
categories limited to others libraries? If yes, it must be done on another
bug report).
There is a special behavior if there is only 1 adult category, the
user does not need to select a category. So the same as before with
only 1 adult patron category.
- Import a patron with a category_code which does not exist. You should
be warned.
- Modify some patron using the batch patron modification tool. The
patron category descriptions should correctly be displayed.
Note that the overduerules page has already been tested in a previous
patch.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Category module contained only 1 method to return the patron
categories available for the logged in user.
The new method Koha::Patron::Categories->search_limited does exactly the
same thing (see tests) and must be used in place of it.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to
other libraries.
- On the 'Item circulation alerts' admin page
(admin/item_circulation_alerts.pl), modify the settings for check-in
and checkout (NOTE: Should not we display all patron categories on
this page? If yes, it must be done in another bug report to ease
backporting it).
- Search for patrons in the admin (budget) and acquisition (order) module.
- On the patron home page (search form in the header)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces sql queries done in some pl script and in
C4::Reports::Guided.
Since we have now a Koha::Patron::Categories module, we should use it
where it is possible.
Test plan:
- Prerequisite: Be sure you have several patron categories created, with
different option enabled, and limit some to certain libraries.
- On the 'Circulation and fine rules' admin page (admin/smart-rules.pl),
all the patron categories should be displayed (even the ones limited to
another library), ordered by description. Try to add/update existing rules.
- On the overdue rules page (tools/overduerules.pl), all the patron
categories with overduenoticerequired set should be displayed.
Try to add/update existing rules.
- On the following reports:
reports/borrowers_stats.pl
reports/issues_avg_stats.pl
The patron categories should be displayed. Note that there is an
inconsistency with these 2 reports: the patron categories limited to
other libraries are displayed on them, when they are not on the other
reports. This should certainly be fixed (on another bug report).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Add tests for CanItemBeReserved returns 'itemAlreadyOnHold' to t/db_dependent/Holds.t
* Don't let GetReserveId explode
* Use search instead of map
* Remove instances of resbarcode
* Fix badly formed li closing tag
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes sure that, if there is no framework code,
$frameworkcode is set to 'default'. This fixes the format issue.
Then, if $frameworkcode = default, an empty string (rather than
null) is passed to the ExportFramework method, as the framework
code in the DB for default codes is "".
To test:
1) Go to Admin -> MARC Bibliographic framework
2) Try to export default framework in all formats, notice the file is
only exported as .ods and is an empty file. Notice warns in intranet
error log.
3) Apply patch and refresh page
4) Confirm exporting default framework works in all formats and
spreadsheet has data
5) Notice warns in error log are gone
6) Confirm export still works for other frameworks
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
Enable HTML5MediaYouTube and ensure WWW::YouTube::Download is installed
Add an 856$u to a record like: https://www.youtube.com/watch?v=tu0qtEwb9gE
Verify you can see the embedded player
Use the youtube shortened like (from the share button) like:
https://youtu.be/tu0qtEwb9gE
Verify you can see the embedded player
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
01/01/01984 should not be considered as a valid date.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If a date does not contain leading zeros for day and month, the date
will be refused.
parseDate function considers 1/1/1990 as a valid date, but our perl code
does not. We must refuse it.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
