Adds the notices SHARE_INVITE and SHARE_ACCEPT to sample_notices.sql for
the foreign language installer files in installer/data/mysql.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I tested each installer file by deleting all notices from letter, running
the file and counting the records. I did so with and without this patch.
The results below show that in each case two notices were added as
expected. Note that the English file contains 25 notices including the two
new ones.
BEFORE THIS PATCH:
de-DE/mandatory/sample_notices.sql: 23 notices
es-ES/mandatory/sample_notices.sql: 18 notices
fr-FR/1-Obligatoire/sample_notices.sql: 18 notices
it-IT/necessari/notices.sql: 21 notices
nb-NO/1-Obligatorisk/sample_notices.sql: 23 notices
pl-PL/mandatory/sample_notices.sql: 18 notices
ru-RU/mandatory/sample_notices.sql: 18 notices
uk-UA/mandatory/sample_notices.sql: 17 notices
AFTER THIS PATCH:
de-DE/mandatory/sample_notices.sql: 25 notices
es-ES/mandatory/sample_notices.sql: 20 notices
fr-FR/1-Obligatoire/sample_notices.sql: 20 notices
it-IT/necessari/notices.sql: 23 notices
nb-NO/1-Obligatorisk/sample_notices.sql: 25 notices
pl-PL/mandatory/sample_notices.sql: 20 notices
ru-RU/mandatory/sample_notices.sql: 20 notices
uk-UA/mandatory/sample_notices.sql: 19 notices
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
"Fines and fees" is consistent with the description of the
main "updatecharges" permission; in some areas, "charges" by itself
can refer to loans, not fees.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Rephrases permission description a bit to make it clearer and easier to
translate.
Adds German descriptions as requested by katrin.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and all tests.
Tested with various permission combinations:
- superlibrarian
- updatecharges (full permission)
- only 'remaining permissions for updating charges'
It works as expected.
Note: I think we need a follow up to include the
'Forgive overdue charges' checkbox on the check in page
in the new permission.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds new sub-permissions to updatecharges, 'writeoff' for writing off
fees and 'remaining_permissions' for all other fee related activites.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Remove the 'writeoff' permission from your privileges
4) Attempt to write off a fee, you should not be able to
5) Re-add the 'writeoff' permission
6) Attempt to write off a fee, you should now be able to do so
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some files had truncate. Some files had foreign key checks.
Other files had foreign key checks disabled. Some files gave
the column names expressly, and others assumed the fields in
a particular order. Everything was modified to:
- not truncate
- not say utf8 (because it should already be by default)
- not disable foreign key checks (because it should work)
- expressly name the fields (adding fields shouldn't break it)
TEST PLAN
---------
0) Backup opac_news if you care about your news.
1) open mysql client
2) use the koha database
3) Run the following script
TRUNCATE opac_news;
source ~/kohaclone/installer/data/mysql/uk-UA/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/it-IT/necessari/sample_news.sql
source ~/kohaclone/installer/data/mysql/de-DE/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/nb-NO/2-Valgfritt/sample_news.sql
source ~/kohaclone/installer/data/mysql/en/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/pl-PL/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/es-ES/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/ru-RU/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/fr-FR/2-Optionel/sample_news.sql
- Were there errors?
- Did everything add nicely?
- Not likely, by expressly stating the idnew field, the news
items in some files would not be added.
4) apply patch
5) try running the script again
- Were there errors?
- Did everything add nicely?
6) Log into the staff client
7) Tools->News
- Do you see the news items added?
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Much needed clean up, making for much more robust and less error prone
sql
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Revised Test Plan
-----------------
The following SQL commands were used to test this.
installer/data/mysql/en/optional/parameters.sql is part of the
first patch and didn't really need testing again.
installer/data/mysql/de-DE/optional/parameters.sql is not part
of the patch, but since I was playing with the script, which
is also attached here, it was included for good measure.
use kohadata;
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/pl-PL/optional/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/es-ES/optional/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/ru-RU/optional/sample_currency.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/uk-UA/optional/sample_currency.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/it-IT/necessari/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/de-DE/optional/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/nb-NO/2-Valgfritt/parameters.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/en/optional/parameters.sql
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds 2 circulation permissions: force_checkout and
lift_restriction.
During upgrade, these two permission are added to existing staff
users that already have the base circulate permission.
force_checkout allows a librarian to force a checkout if a limitation
occurred.
lift_restriction allows a librarian to lift a restriction for a patron.
Test plan:
1/ Find a debarred patron and go on the checkout page. The "Lift
restriction" button should be present only if the logged librarian has
the lift_restriction permission.
2/ If the force_checkout permission is set, a librarian should be
allowed to check out in several cases:
- age restriction
- the item is issued to another patron
- the item is not for loan
- the patron has overdue items
- the item is lost
- the item is a high demand item
- the item is reserved
- another case ?
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: The force checkout permission should not affect high holds
- typo checkout => check out.
- the force checkout permission does not affect high holds.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: Follow-up: Adding missing permissions to translated files
This patch adds the 2 new permissions to all remaining sample files.
If the permissions don't get installed, the problem is bigger than
having an English description.
Also adds back the question "Check out anyway?" for high demand items (HIGHHOLDS).
Test xt/permissions.t passes now.
Bug 10863: Rename lift_restriction with manage_restrictions
The pref manage_restrictions now takes into account "Lost card" and
"Gone no address" restrictions.
Test plan:
- log in with a user with manage_restrictions permission
- verify you can set/unset restrictions when editing a patron
- log in with a user without manage_restrictions permission
- verify you cannot set/unset restrictions when editing a patron
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Note: The AgeRestrictionOverride pref has to be set to "Allow" if you
want to override the age restriction, even if the new permission is set.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify all sample_frequencies.* files have been moved from optional
to mandatory directories.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify all sample_numberpatterns.* files have been moved from optional
to mandatory directories.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All sample files for numbering patterns are moved from optional
to mandatory.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- List of libraries in basket.pl is now sorted by branch name, not code
- When IndependantBranches is ON, user has only the possibility to set
basket branch to its own branch, or to no branch at all.
- When basket do not belong to any branch, selected branch by default is
connection branch (was 'no branch')
- added id attributes to both added li elements
- change description of 'order_manage_all' permission to make it
clearer.
- remove Test::MockModule dependency
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Add branch info to baskets
- Add a list of borrowers that are allowed to manage a basket (one list
for each basket).
- Add a new subpermission: acquisition => order_manage_all
If user is superlibrarian, or if that user has permission acquisition = 1
(GranularPermissions = OFF), or subpermission acquisition =>
order_manage_all (GranularPermissions = ON), that user is authorised to manage
all baskets.
Depending on syspref AcqViewBaskets:
'all': user can manage all baskets
'branch': user can manage baskets of their branch (the basket branch is
taken into account, not the branch of the basket's creator).
If basket branch is not defined, all users can manage this
basket.
'user': user can manage baskets she created, and baskets in their
user list
There are unit tests in t/Acquisition/CanUserManageBasket.t, which
require Test::MockModule
You can edit basket's branch and users list in basket modification page
(acqui/basket.pl)
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the serial module, we want to hide serials from others libraries.
However, to permit central serials manage, this patch introduces a
new permission, 'superserials'. If a staff member has this permission,
that person can override the restriction.
Test plan:
- Switch on the IndependantBranches syspref
- Add the permission 'superserials' for a patron and test you can
navigate and see all serials
- Remove this permission and test you cannot manage/view subscriptions
from others libraries
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Serials numbering pattern and frequencies are no longer hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This patch adds two new sql tables
(subscription_numberpatterns and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
English and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern, you can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' information.
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Squashed commits:
-----------------
Bug 7688 follow-up: Small fixes for QA
- # Subroutines::ProhibitExplicitReturnUndef: Got 1 violation(s) in
C4::Serials::GetSubscriptionIrregularities
- Bad template constructions fixed in serials/subscription-add.tt
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688 follow-up: Small fixes for QA #2
- "return undef" -> "return"
- ":utf8" -> ":encoding(UTF-8)"
- TAB -> SPACES
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Translate sample frequencies for french
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Fix generating next serial when there is no 'Expected' issue
It can happen when the Expected issue is claimed. In this case the
status of the last serial is 'Claimed'
This patch change the API of GetNextSeq and GetSeq
Test plan:
- Create a subscription which starts a long time ago so that serials
automatically appear in late issues
- Receive the first serial
- Go to claims page and claim the 2nd serial.
- Go back to the subscription page and click on 'Serial collection'
- You should have 2 serials, one 'Arrived' and one 'Claimed'.
- Click on Generate Next. This should fail with a software error message
("can't call method output ...")
- Apply this patch and click again on Generate Next. A new issue must be
created with status 'Expected'.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Followup FIX perldoc
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new user permission for patron list management,
tools => manage_patron_lists.
This closes a security issue with the original patch series where
patron lists and their contents could be retrieved and modified
without requiring authentication of any sort.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
'ind' rather than 'ita' was set as the ISO639-2 language
code for Italian in the fr-FR, it-IT, pl-PL, ru-RU, and uk-UA
installation SQL.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I checked nb-NO and de-DE - language code there had already
been corrected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
This followup adds Catalan language into languages
other than english.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This reverts commit 60508cb03d, reversing
changes made to 8579d07f14.
The patches for bug 7688 caused a failure in t/db_dependent/Serials.t:
not ok 8 - test getting history from sub-scription
Conflicts:
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
kohaversion.pl
Serials numbering pattern and frequencies are no more hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This implies new sql tables (subscription_numberpatterns
and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
english and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern. You can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' infos
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Trivial string substitution.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test Plan:
1) Run xt/permissions.t, note the errors
2) Apply patch
3) Re-run xt/permissions.t, note the errors are gone
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removed NoZebra vestiges. This comprises several code blocks that depend on the NoZebra syspref and NZ related functions/methods.
C4::Biblio->
GetNoZebraIndexes
_DelBiblioNoZebra
_AddBiblioNoZebra
C4::Search->
NZgetRecords
NZanalyse
NZoperatorAND
NZoperatorOR
NZoperatorNOT
NZorder
C4::Installer->
set_indexing_engine
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds a new user permission overdues_report for the circulation module, and requires this permission to run the overdue items
report, rather than requiring full reports permissions.
Test plan :
With a user with permissions circulate_remaining_permissions :
- Add overdues_report permission to user
- Go to circulation home
=> you see "Overdues" link
- Clik on it
=> you are allowed to access and use this page
- Remove overdues_report permission to user
- Go to circulation home
=> you do not see "Overdues" link
- Edit URL : <server>/cgi-bin/koha/circ/overdue.pl
=> you are not allowed to access this page
- Go to main page
=> you don't have access to reports module
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolyn SOMERS <fridolyn.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a system preferences (RenewalSendNotice - default no) to controll the renewal notice sending.
Added to installer languages the renewal notice template.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This feature will add the option of displaying a select quote
for the day on the OPAC homepage. It will include the addition
of a QOTD editor in the tools section of the staff interface
which will allow the addition, editing, and deletion of quotes.
A single system preference will enable/disable the display of
the QOTD on the OPAC homepage. A new granular permission will
also be added to conrol user access to the QOTD editor tool.
Possible extentions to this would be code to allow alternate
quote selection algorithms to be added to vary how the currently
displayed quote is selected from the table of quotes.
This patch is a squash of the following work:
--Adding quotes table to kohastructure.sql and updatedatabase.pl
Note: This patch is intended for a MySQL based installation only.
That means that it includes backticks because that is what is required
at this point in history to install Koha correctly on a MySQL based
installation.
Feel free to port this over to the Pg stuff in the data/Pg directory.
--Adding system preference to control display of QOTD on OPAC main page
--Adding sample quote data
These quotes are taken from various US presidents. I'm not sure these
are applicable to the rest of the world, so I'm leaving it to translators
and others to add sample quote data for other languages.
--Adding edit_quotes user permissions
--Squash with other db related patches in this series
--Adding quotes editor pages to tools
--Adding QOTD editor link to tools homepage
--Integration of DataTables into QOTD Editor
--Impleminting jEditable into the quote editor
--Adding delete and add option to editor
--Fixing OPAC display so the QOTD div does not show if no quote is returned
--Also removing useless code from tools/quotes.pl
--Adding spans around QOTD foo in opac-main.tt
--Also fixing quote selection logic to accomodate the possibility of
a single quote in the db a litte better.
--Changing timestamp column header to a more user-friendly 'Last Displayed'
--Fixing bug in quote selection logic. This bug caused a situation where
when the table had only a single quote with an id greater than 1 in it,
no quote would be selected.
--Fixing up sorting in the quote editor table. --jcamins
--Adding span element to quote separator --jcamins
--Overriding the default empty table message supplied by datatables-strings.inc
--Adds missing page heading
--Adds beginning of click-for-help elements.
--Refactors delete functionality to allow selecting of quotes to delete,
enabling multi-delete.
--Refactors saving added quote functionality so that striking <Enter>
saves the new quote.
--Refactors canceling aded quote functionality so that striking <Esc>
cancels the new quote.
--Removing debug console.log statements
--Implementng the YUI button widget/toolbar used on other pages.
--Adds a 5px radius to all YUI buttons to bring them into
conformity with the general trend toward rounded corners
--Fixes capitalization in quote editor
--Implements improvements suggested by jcamins and oleonard
--Adds DataTables Plugin dataTables.fnReloadAjax.js
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Removes the '0' values without description from the sample date for
authorised values.
To test:
1) Verify that SQL files load correctly
- truncate authorised_values; /* empty authorised values table */
- load sample data using one of the SQL files
2) Check cataloging interface - all status fields should only show 1 empty line
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Changes: Marc21 support, 995 for items (Unimarc), authorities types for both
MARC's, many small field/subfield changes
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
It works, doesn't break anything, seems to be in Ukrainian/Russian (I can't
judge).
It's a huge patch (21M). That's why it's attached as a bz2 archive: so the
archive must be downloaded, decompressed, and then applied.
General remark: Adding this patch to Koha will increase substantially Koha git
repository size. It shows that non-code files (.po files, SQL files)
could/should be managed outside Koha core repository. See this discussion:
http://wiki.koha-community.org/wiki/Git_Splitting_and_Shrinking
Here is my test plan:
[1] Apply the patch on master
[2] Install ru-RU and uk-UA languages:
cd misc/translator
./translate ru-RU uk-UA
[3] re-create Koha DB:
DROP DATABASE koha;
CREATE DATABASE koha;
[4] Load Koha pro interface: get web installer
[5] Choose ru-RU language
[6] Everything is in Russian. Click blindly on button until reaching the
page where to choose Unimarc/Marc21.
[7] Choose Unimarc.
[8] Tick on everything to load all UNIMARC SQL files.
[9] All SQL are loaded without any error.
[10] Check Koha cataloguing.
[11] Go to [3] and choose Marc21 at step [7].
[12] Go to [3] and choose uk-UA at step [5].
[13] Go to [3] and choose uk-UA at step [5] and Marc21 at step [7].
Branches can have their own version of notices - added branchcode to
letter table.
Support html notices - added is_html to letter table.
Support for borrower attributes in templates.
GetPreparedletter() is the interface for compiling letters (notices).
Sysprefs for notice and slips stylesheets
Added TRANSFERSLIP to the letters
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Aleksa Vujicic <aleksa@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended to replace some copy-and-paste comments only with consent of MJR.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The previous patches missed adding the upload_local_cover_images permission to
languages other than en, and used a forbidden TT construct, giving jenkins
agitas and indigestion. This patch adds the permission to other languages and
corrects the syntax.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds 2 columns in the aqorders table :
- claims_count : number of claims for an orders
- claimed_date : date of the lastest claim
In the lateorders.pl table, you can not select orders from different
supplier because there is just one letter sent after clicking the "Claim
order" button. So, it's logic that you want to select only orders from
this supplier.
Modification in C4/Letters.pm:
refactoring code for claimacquisition and claimissues letter type.
Now, fields for theses letters check the table name. It's not possible
to chooce aqorders.title, this field doesn't exist !
Furthermore, you can add a <order> tag around your item fields, like
this :
-- Begin example
<<LibrarianFirstname>>
<<LibrarianSurname>>
<<aqbooksellers.contact>>
<<aqbooksellers.address1>>
<<aqbooksellers.phone>>
<<aqbasket.basketno>>
<<aqbooksellers.phone>>
<order>Library : <<items.homebranch>>
In your possesssion : <<biblio.author>>. <<biblio.title>>.
<<biblioitems.publishercode>>, <<biblioitems.publicationyear>>.
Callnumber : <<items.itemcallnumber>>. doc type : <<items.itype>>
Barcode : <<items.barcode>>
Date for the return : <<items.onloan>>.</order>
<<LibrarianSurname>>
-- End example
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Some of the translated sql files still had 'Item_DUE' instead
of 'Item_Due' causing the staff interface to display 'unknown'
instead of the correct description.
To test:
- Do a new installation, using German, French, Polish, Russian or Ukrainian sample files.
- Actived EnhancedMessagingPreferences
- Create a new patron category and check message descriptions display correctly
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Sending messages will not work correctly without correct data in sample_notice_message_transports
and sample_notice_message_attributes tables. There is no way to configure those tables in Koha.
SQL files should be in the mandatory part of the web installer.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 6537 - Move installer/data/mysql/en/mandatory/sysprefs.sql to installer/data/mysql/sysprefs.sql
Bug 6537 - Make the web installer use installer/data/mysql/sysprefs.sql
Bug 6537 - New syspref files with only the prefs that differ from the default
I have mostly deleted old syspref files and created new ones, with a new name,
mainly in order to reduce the risk of merge conflicts if the old syspref files
are changed before this patch is pushed, if it is pushed.
See http://wiki.koha-community.org/wiki/Simplified_syspref_handling_RFC for
a description of how the new files were created to reflect sysprefs that
differ from the global default.
.txt files have been moved to reflect the new names of the SQL files they are
associated with.
Bug 6537 - Remove syspref-related tests in xt/
As far as I can see, the previous patches for this bug makes the syspref tests
obsolete, and this patch removes them:
xt/syspref.t
xt/check_sysprefs.t
Bug 6537 - Fix a problem in French syspref file
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Installs syspref MARCAuthorityControlField008.
Rebased June 1, 2011 for master.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Follow up patch for installing pref BasketConfirmations.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Add 'libsuite8' as new option to system preference 'itemBarcodeInputFilter'
en and nb-NO files are already correct.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This new system preference (in OPAC Features) allows libraries to
turn off reviewer photos entirely if they want to. The default is
for these photos to be shown.
Note that this setting is linked to ShowReviewer in that both of
them need to be turned ON for the avatars to be displayed.
Signed-off-by: Francois Marier <francois@debian.org>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
