And reflect that in the UI strings + variable names
Test plan:
1. Set syspref "item-level_itypes" to "specific item"
2. Create a hold on a record with one item
3. Change the document type of the item
4. Check that the item edition page and the record page show 2 different
types.
5. Go to /cgi-bin/koha/circ/pendingreserves.pl
6. Check that the displayed type is the item one
7. Set syspref "item-level_itypes" to "biblio record"
8. Go to /cgi-bin/koha/circ/pendingreserves.pl
9. See that the displayed type is the item one. When the sysopref says
"record"
This is the bug.
10. Apply this patch
11. Go to /cgi-bin/koha/circ/pendingreserves.pl
12. See that the displayed type now follows the syspref
13. Set syspref "item-level_itypes" to "specific item"
14. Go to /cgi-bin/koha/circ/pendingreserves.pl
15. See that the displayed type still follows the syspref
Signed-off-by: Lucie Gay <lucie.gay@ens-paris-saclay.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note that these patches should be pushed along with bug 19984 to avoid
regressions (if the syspref is changed between the 2 update DB entries)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The goal to this enhancement is to add the ability to cancel a hold and
mark items as lost from the 'Holds to pull' page.
A new pref is added to control the behaviour, default is off
To mark items as lost you need to set the new pref CanMarkHoldsToPullAsLost to one of these two values:
- "Allow to mark items as lost"
=> The item will be marked as lost and the hold will be cancelled
- "Allow to mark items as lost and notify the patron"
=> Same as previously but the patron will be notified as well.
The notification is done using a new notice template (code=CANCEL_HOLD_ON_LOST).
Feel free to suggest another default wording.
To update the values of the items when one of these 2 buttons are used, you need to
fill the UpdateItemWhenLostFromHoldList with something like: 'itemlost: 1'
Test plan:
1/ Place holds on some items
2/ Go to Home > Circulation > Holds to pull
From here you can cancel the hold or
3/ Mark the items as lost
=> You will receive feedback messages depending on different situations:
* The CANCEL_HOLD_ON_LOST does not exist
* The patron does not have an email address (but the notice has been
enqueued! It is the current behaviour with other notices)
* The notice has been enqueued
* The hold has been cancelled
QA Notes:
From which library do we want to pick the notice? This patch use
reserves.branchcode
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Changes made:
- remove obsolete comment in pendingreserves.pl
- use Modern::Perl in circ/pendingreserves.pl
- get rid of unusable param run_report - followup for bug 8454
- get rid of references to hold status - followup for bug 9320
- remove unused data from SQL and reservedata structure
Test plan:
1) Apply patch from bug 18073
2) Apply patch on this bug
3) Enable on shelf hold in administration -> circulation and fines rules
4) Create some holds on avalaible items
5) Confirm that circulation -> holds to pull page works as expected
6) Try to find any regression
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
0) apply the patch
1) enable on shelf hold in administration -> circulation and fines rules
2) create some holds on avalaible items
3) go to administration -> columns settings and confirm there is new holds-to-pull table in circulation section
4) go to circulation -> holds to pull page and confirm that
4a) that the page does work as before
4b) there is ne "Column visibility" button in datatable toolbar
4c) the column configuration does work as expected
4d) there is new column "First patron" with link to patron which is
first in holds queue for given record
4e) sorting works ax expected
4f) filters (in teh bottom of table) work as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works nicely!
https://bugs.koha-community.org/show_bug.cgi?id=18079
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch adds output of subtitle to the holds to pull report using
keyword to MARC mapping information.
To test, apply the patch and go to Circulation -> Holds to pull. The
list of holds to pull should display subtitles.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Subtitle added using keyword to MARC mapping with default framework.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same fix as previous patch, but for item types.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The patches from bug 12152 broke the display on the pending reserves/
holds to pull report when items from multiple branches and with
multiple locations were displayed. The table cells were left empty.
To test:
- Add a record with at least 2 items from different locations and
holdingbranches
- Open the 'holds to pull' report
- Verify all branches and locations show with their correct
description
Signed-off-by: Natasha <tasham_8@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Corrected enddate (subtraction in the revised code must be an addition).
Replaced hardcoded 2 days by a constant.
Renamed the constant TWO_DAYS to PULL_INTERVAL.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested all three date formats.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch uses Koha::DateUtils instead of C4::Dates and Date::Calc. It
also sent DateTime objects to the template, which use the TT plugin to
display them.
If an invalid dates is entered, the default date is picked.
Test plan:
1/ Go to Home > Circulation > Holds to pull
2/ Verify that the the filter and the list behave as before
3/ Enter invalid dates and confirm that you do not get a software error
Counter patch works as expected and is a much cleaner solution.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The holds to pull report could be improved by improving sorting on the
title and date columns. This patch adds "anti-the" sorting to the title
column and "title-string" sorting to the date column.
Date formatting of another variable has been moved to the template for
formatting using KohaDates.
The patch includes other corrections for HTML validity.
To test, apply the patch and view the holds to pull report.
- Sorting by date should work correctly regardless of dateformat system
preference setting.
- Sorting of the title columns should correctly ignore articles.
- Formatting of the "Reported on" date should be correct.
Revision incorporates the corrections made by Bug 12127 and converts
those changes to use class-based sorting.
Signed-off-by: David Cook <dcook@prosentient.com.au>
The patch works as described. Thanks for including and improving the
changes from Bug 12127, Owen!
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
No regressions found, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The 'notes' column has been removed from the pending holds and hold
ratios reports as they were not displaying in the first place.
1.apply patch
2.verify that both reports work
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Description:
A new pref ConfirmFutureHolds is added. When confirming a hold at checkin time,
the number of days in this pref is taken into account when looking for reserves.
Note that this pref does not interfere with renewing, issuing or transferring
a book. For report Holds to pull, the default end date is calculated with this
new preference.
The use of ConfirmFutureHolds is useful only when future holds are allowed.
Test plan:
1) Enable future holds. Add a number of days into ConfirmFutureHolds.
2) Place a future hold within this number of days.
3) Run holds to pull report. Check default startdate and enddate.
4) Check this book in. Can you confirm the hold? Do not confirm.
5) Issue the book to another patron. You should not see a warning.
6) Renew the book for this patron via opac or staff. No warning either.
7) Check in again. Warning pops up again.
8) Transfer book. Switch branch. Check in. Hold found pops up. Do not confirm.
9) Back to first branch. Check in (with popup). Remove the hold. Add new future
hold past the number of days. Check in (no warn).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan : * chose an item reserved by multiple patrons.
* return the item and confirm reservation =>
item is waiting to be picked up
* run circ/pendingreserves.pl
=> without patch, this item is shown in the list
=> with the patch, only really available items are show.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Works according to test plan. The title with one waiting item appeared
in pending holds report before the patch, doesn't appear after the
patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- the DHTMLcalendar_dateformat variable is unused
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts:
- opac/sco/sco-main.pl
- reports/acquisitions_stats.pl
- tools/cleanborrowers.pl
All tests pass, perlcritic problems appeared in some files
before and after these patches were applied.
Checked sorting in following pages:
- acqui/addorderiso2709.tt - list of staged imports in acq
- acqui/histsearch.tt - sorting of dates in acq search result list
- acqui/invoices.tt - billing date in list of invoices in acq
- acqui/lateorders.tt - list of late orders in acq
- acqui/ordered.tt - ordered titles and estimated costs for a fund
- acqui/parcels.tt - receive shipment page
- acqui/spent.tt - received titles and actual costs for a fund
...
- serials-search.tt - subscription search result list
...
- opac/sco/sco-main.tt - due dates in list of checked out items
- reports/acquisitions-stats.tt - date searches, display of dates
- tools/cleanborrowers.tt
- tools.holidays.tt - different views of dates library is closed,
adding dates
Checked dates display according to system preference everywhere and
searching, entering dates etc. still worked as expected.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, when you click "Holds to pull" from the Circulation menu, the only thing that you see is a white screen and a side navigation bar that says "Refine Results".
Since there appear to be no results to refine, the holds to pull list appears completely empty. Staff have to know to click "Submit" on the "Refine Results" form to get anything.
I propose that we have the "run_report" flag set to ON for the initial load. The report uses the default 2 days mentioned in the "Refine Results" form, so there is continuity across the board.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Currently, Koha creates a default value of 2 days ago (-2) for the start date of the Holds to pull List. This system preference allows users to specify their own default start date for this list, since users might not want to have to manually change the date all the time when they already know the set date period they want to view.
The system preference value is specified as a positive integer, which is then passed as a negative integer in the handler script. This saves users from having to include a qualifer to the sys pref value.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Suspended holds are showing up in both the holds queue and holds to pull reports.
This patch adds to the sql queries such that any hold that is suspended
is not selected.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Data is there and correct - very helpful patch, thanks!
passes prove t xt t/db_dependent in line with current master failures.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Delivered range was 10 years ago to yesterday; changed default
to be two days ago to today. Also removed notes field from report
output; 5xx fields can be quite large and including them in the
display resulted in a very lengthy printout for staff.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Note: I question the use of GROUP_CONCAT(... SEPARATOR '<br/>'),
because that puts knowledge of the output mechanism (currently HTML)
into the SQL query. However, I am not fixing this right now.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
* use Date::Calc to perform date arithmetic
* use Date::Calc::Today to consistently format the current date
* format date per syspref in overdue report
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Billing.pl -- new, gives bills that occur in a range, works
pendingreserves.pl -- fixed, works now, with branches also
reserveratios.pl -- indicates distressed reserves
itemslost.pl -- Fix to this to make it more useful and fix bugs
Itmes.pm -- small change to work for itemslost, should not affect
anything else
and all tmpl files.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The new tables have the same structure and constraints
as the tables they archive with the following exceptions:
* borrowernumber and biblionumber in old_reserves can be
NULL
* the FK constraints (e.g., for itemnumber) on old_reserves
set the child column to NULL if the parent row is deleted
instead of deleting the child row.
* there is no FK constraint on old_issues.branchcode, allowing
a branch to be deleted without changing archived requests.
Some miscellaneous cleanup was done as part of this patch:
* GetMemberIssuesAndFines (C4::Members) now uses bind variables
* fixed POD for GetMemberIssuesAndFines
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Rule :
- always format_date() before sending date to template
- always format_date_in_iso immediatly after reading a date coming from a parameter
- deal internally only with dates in iso
Note that :
- I could not test things related to issues stats due to the my DB -issues.issuedate not filled, see commit about 3.00.00.006
- acquisitions_stats does not work when you filter on date
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
- updating templates to have tmpl_process3.pl running without any errors
- adding a drupal-like css for prog templates (with 3 small images)
- fixing some bugs in circulation & other scripts
- updating french translation
- fixing some typos in templates
