To test:
1 - Enable SMS using the Email driver
2 - Add an SMS provider under admimistration
3 - Add an SMS number and provider to a patron
4 - Note on the patron details you don't see the provider :-(
5 - Apply patch
6 - Reload
7 - Note you do see the provider :-)
8 - prove t/db_dependent/Koha/Patrons.t
9 - Sign off!
Signed-off-by: Lisette <lisetteslatah@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch fixes the call to show the patron expiry date
on the Details page when the patron is soon to expire.
Test plan:
0. Do not apply patch yet
1. Create a patron
2. Set patron's date expiry to 3 days from today
3. Go to Details tab
4. Note message "Expiration: Patron's card will expire soon.
Patron's card expires on Renew or Edit details"
5. Apply patch
4. Note message pattern "Expiration: Patron's card will expire soon.
Patron's card expires on XX/XX/XXXX Renew or Edit details"
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes a typo in the argument to the "op" parameter
for the "Edit details" link when editing an expiring/expired patron
on the Details page.
Test plan:
0. Do not apply patch yet
1. Create patron
2. Set expiry date to 3 days from now
3. Go to Details tab in patron record
4. Click "Edit details" in "Library use" section
5. Note the form is blank and has no patron data in it
6. Apply the patch
7. Reload the Details page in patron record
8. Click "Edit details" in "Library use" section
9. Note the form now contains your patron data and will
work for editing the details
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Verify on staff side that patron can be edited to opt in our out of auto renewal
2 - Check out some items to a patron opted in to auto renewal
3 - Ensure the items are checked out and set to autorenew
4 - Login on the opac at the patron
5 - Verify items cannot be renewed as scheduled for auto-renewal
6 - On staff side, opt patron out of auto renewal
7 - Verify on opac items are no longer marked for auto renewal
8 - Run the auto renewal cron job, items are not renewed
9 - Set 'no renewal before' to a setting that would prevent renewal
10 - Verify that opting patron in or out of auto renewal changes only the reason items cannot be renewed
11 - Set 'no renewal before' to a setting that would allow for renewal
12 - Verify that opting patron in/out changes their ability to renew
13 - Verify that when opted out cron does not renew
14 - Verify that when opted in the item is auto renewed
15 - Reset the due date, opt out, verify manual renewal succeeds
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes 2 changes:
- bug 22702 allowed adding HTML to the circulation note, so this patch
restores that ability.
- display OPAC note and messages as multi-line in OPAC
To test:
- Add a circulation and an OPAC note with line breaks and HTML tags
to the patron account
- Add a message with line breaks to the patron account
- Check line breaks don't show on
- OPAC > patron account > my summary page
- Staff > patron account > details
- Apply patches
- Repeat test
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
- Fill borrowernotes and opacnote with lines separated by lines
endings,
- save and check the content is displayed on a single line,
- apply this patch,
- check lines endings are displayed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The GetBorrowerAttributes subroutine return the attributes for a given
patron.
Using get_extended_attributes we can acchieve it easily. The problematic
here is to restore the method's name (value vs attribute,
value_description vs description of the authorised value, as well as
display_checkout that should not be a method of Attribute, but
Attribute::Type instead)
value_description was used when the attribute types were attached to an
authorised value category. To avoid the necessary test in template and
controller there is now a $attribute->description method that will
display either the attribute's value OR the value of the authorised
value when needed. We should certainly use this one from few other
places.
Notes:
* This patch rename Koha::Patron->attributes with Koha::Patron->get_extended_attributes.
It will be renamed with Koha::Patron->extended_attributes in ones of the next
patches when it will become a setter as well.
* GetBorrowerAttributes did not care about the library limits, we still
do not
* The opac_only flag was not used outside of test, we drop it off.
* To maintain the existing behavior we add a default order-by clause to
the search method [code, attribute]
* From C4::Letters::_parseletter we always display the staff description
of the AV, There is now a FIXME to warn about it
* FIXMEs are not regressions, existing behaviors must be kept
* TODO add a new check to bug 21010 to search for inconsistencies in
patron's attributes attached to non-existent authorised values
* One test has been updated in Modifications.t, order_by is now
by default set to ['code', 'attribute']
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The ability to claim an item "claim returned" is not there if the syspref is empty, however, the Claim Returned tab is stil present on the patrons detail page.
Test Plan:
1) Ensure ClaimReturnedLostValue is not set
2) Note the claims tabs on the circulation and patron details pages
3) Apply this patch
4) Refresh those pages
5) The claims tabs should be gone!
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes "circulation" and moremember" templates functions
for Datepicker plugin. They now use options common for all inputs with
"datepicker" class and get "minDate" option from class "futuredate" assigned
function in "calender.inc".
To test:
- Apply patch
- Add holds for patron
- Use "Suspend all holds" calendar
=>Calendar greys out dates past from today
Signed-off-by: David Roberts <david.roberts@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Should work as before with the test plan from the second patch. But
removes the added jQuery display control code in favor of checking
if fines is set on template level.
For several patrons with and without fines and with credits:
- Check the Fines & Charges only display when there is something to see
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
With this patch, the tab will not show if there are no fines.
I've also changed how the fines look in the tab header to look more like
the OPAC fines tab.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There was no way to see the not registered guarantors apart of editing
the patron.
Test plan:
- Create a patron with category type "Child"
- Define a "guarantor surname" and/or "guarantor firstname" in the
"Contact" block (the patron is not registered)
- See the patron's detail page and notice that the info appear
- Edit and add a registered guarantor
- See the patron's detail page and notice that the 2 guarantors info appear
Note that the relationship has been added.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch replaces the unmaintained third party rowGrouping datatables
plugin with the supported core rowGroup replacement.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies the DataTable configuration for the table of holds
which displays under the "Holds" tab on the patron's checkout and
details pages. A variable is now defined in the JavaScript with the
value of the "SuspendHoldsIntranet" system preference. This variable is
passed to the DataTable configuration to determine whether the column is
visible or not.
One of the changes made in this patch moves a <script> block so that it
appears before some of the JS includes on the page. This helps keep the
string-defining JS together in one block.
To test, apply the patch and set the "SuspendHoldsIntranet" system
preference to "Allow."
- Open the checkout page for a patron with one or more holds.
- Under the "Holds" tab, the table of holds should have a "Suspend"
column with controls for suspending or resuming holds.
- Check that the same is true on the patron detail page.
- Set the "SuspendHoldsIntranet" system preference to "Don't allow."
- Test the checkout and detail pages again and confirm that the
"Suspend" column does not appear.
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This adds a "Claims returned" feature that extends and enhances the claims returned lost status.
To use this feature, a new LOST status to represent an item claimed as returned needs to be created.
The value of this LOST authorised value should be set in the new syspref ClaimReturnedLostValue.
Setting this system preference turns on the feature.
Once the feature is enabled, you should be able to mark checked out items as return claims from the
checkout and patron details pages, and also modify them from the new claims tab on those pages.
Returning a claimed item will notify the librarian that the item in question has a claim on it.
Setting the ClaimReturnedWarningThreshold will add an alert to make librarians aware that this
patron has many return claims on the patron's record.
Test Plan:
1) Create a "Claims Returned" lost value
2) Create some RETURN_CLAIM_RESOLUTION authorized values
3) Set ClaimReturnedLostValue
4) Set ClaimReturnedChargeFee
5) Set ClaimReturnedWarningThreshold
6) Create some checkouts
7) Claim some returns
8) Verify ClaimReturnedChargeFee works with all 3 options
9) Verify ClaimReturnedWarningThreshold shows a warning once the threshold has been exceeded
10) Edit notes on a claim
11) Resolve a claim
12) Delete a claim
Sponsored-by: North Central Regional Library System
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ability to place a hold for each member of a club in random order.
To test:
1) apply this patch
2) create 2 clubs, (club names should have some part in common, and some part different for each other)
3) in one of them add at least 6 members
4) enter patron clubs management and click on "Actions" button
SUCCESS.1 => club with members has a new action called "search to hold"
5) click on search to hold
SUCCESS.2 => in the list of bilios there appears an action called "Place hold for <club name>"
6) click on "Place hold for <club name>"
SUCCESS.3 => a new window appears where you can select pickup location (defaults to club's library, if any), and the list of members.
7) go back to the list of bilios in the catalog and click on "Forget <club name>"
8) click on "Holds" action of any biblio
SUCCESS.4 => a search box appears with two tabs: Patrons and Clubs
9) click on Clubs tab and search by the common part of clubs names
SUCCESS.5 => a list of clubs that matches the search appears. If you click on any of them, the same page as SUCCESS.3 appears.
10) go back to the search box in SUCCESS.4 and search by the different part of the name.
SUCCESS.6 => because there is only one club that matches search criteria, the same page as SUCCESS.3 appears;
11) Sign off
Sponsored-by: Southeast Kansas Library - SEKLS
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds two preferences
1. AllowPatronToSetFinesVisibilityForGuarantor: Allow/Don't allow patrons to choose their own privacy settings for showing the patron's fines to the patron's guarantor
2. AllowStaffToSetFinesVisibilityForGuarantor: Allow/Don't allow staff to set the ability for a patron's fines to be viewed by linked patrons in the OPAC
Also adds a tinyint, non nullable, default to 0 column in borrower and deletedborrower named privacy_guarantor_fines.
1. privacy_guarantor_fines = 0 => don't allow guarantor to see guarantee's fines
2. privacy_guarantor_fines = 1 => allow guarantor to see guarantee's fines
To test:
1) git reset --hard master
2) apply patches (including dependencies)
3) perl installer/data/mysql/updatedatabase.pl
4) dbic
5) restart_all
6) in intranet search for AllowPatronToSetFinesVisibilityForGuarantor and AllowStaffToSetFinesVisibilityForGuarantor preferences
SUCCESS => both preferences should be present
7) search for a patron with guarantor
SUCCESS => in details tab, in "Library use" section you should see a row labeled "Show fines to guarantor"
8) edit
CHECK => in Guarantor information there is no "Show fines to guarantor" select
9) set AllowStaffToSetFinesVisibilityForGuarantor preference to "Allow"
10) return to patron with guarantor and edit
SUCCESS => in Guarantor information section there is a "Show fines to guarantor" select
11) change "Show fines to guarantor" select to "Yes" and save
SUCCESS => Value is saved
12) go to details tab
SUCCESS => in "Library use" section you see a row labeled "Show fines to guarantor" with value "Yes"
13) set OPACPrivacy preference to "Allow"
14) open 2 opacs, one with a patron that has a guarantor and another that hasn't and go to "your privacy" tab.
CHECK => in both opacs you should not see a "Allow your guarantor to view your current fines?" select
15) in intranet set AllowPatronToSetFinesVisibilityForGuarantor to "Allow"
16) refresh both opacs
SUCCESS => in Patron that has guarantor you see a "Allow your guarantor to view your current fines?" select
=> in Patron without guarantor you don't see a "Allow your guarantor to view your current fines?" select
17) in Patron with guarantor change value of select and save
SUCCESS => Value is saved
18) in intranet set OPACPrivacy preference to "Don't allow" and AllowPatronToSetFinesVisibilityForGuarantor to "Don't allow"
19) got to "your personal details" in both opacs
CHECK => in both opacs you should not see no Privacy section with a "Allow your guarantor to view your current fines?" select
20) in intranet set AllowPatronToSetFinesVisibilityForGuarantor to "Allow"
21) refresh both opacs
SUCCESS => in Patron that has guarantor you see a "Allow your guarantor to view your current fines?" select in a Privacy section
=> in Patron without guarantor there is no Privacy section
22) in Patron with guarantor change value of select and update
SUCCESS => Value is saved
23) Sign off
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ability to set an unlimited number of guarantors
for a given patron. As before, each guarantor may be linked to another
Koha patron, and all the behavior that applies to a given guarantor
remains the same.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Find some patrons with guarantors, verify the still have their guarantor
4) Test adding and removing guarantors on a patron record, both Koha users and not
5) Verify the "Add child" button works
6) Verify NoIssuesChargeGuarantees still works
7) Verify tools/cleanborrowers.pl will not delete a guarantor
8) Verify the guarantors are displayed on moremember.pl
9) Verify the guarantor is removed by members/update-child.pl
10) Verify the guarantor is removed by misc/cronjobs/j2a.pl
11) Verify import patrons converts guarantor_id, relationship, contactfirstname,
and contactsurname into a guarantor
12) prove t/Patron.t
13) prove t/db_dependent/Circulation.t
14) prove t/db_dependent/Circulation/NoIssuesChargeGuarantees.t
15) prove t/db_dependent/Items.t
16) prove t/db_dependent/Koha/Patrons.t
17) prove t/db_dependent/Members.t
18) prove t/db_dependent/Patron/Relationships.t
Signed-off-by: Kim Peine <kmpeine@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
TO test:
1 - Find and adult patron
2 - Add a child account
3 - Check out some things to the child
4 - View the adults account, click 'Relatives checkouts'
5 - Observe table is oddly formatted
6 - View on both the 'Check out' and 'Details' tabs
7 - Apply patch
8 - Tables are displayed correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a warning if a patron's age is out of limits if an assigned category.
It also adds a button allowing to change the category.
Test plan:
1) Apply patch
2) Create a patron and assign him a category having age limits set
3) Change patron's age to be older/younger than category's limits
4) At "Check out" and "Details" tabs you should see a warning with a
button allowing to change the category, eg.:
- http://prntscr.com/cz7ch3
- http://prntscr.com/cz7em4
- http://prntscr.com/cz7dj1
5) Set a valid category according to patron's age
6) Warning should disappear
7) Perform similar test again, but instead of changing the age change
the limits of a category
8) During tests verify "Change category" button everytime opens "Modify
patron" page:
http://prntscr.com/cz7g5q
9) Ensure that left-side panel is always on its expected place
10) Remove patron's date of birth and test that all categories are
allowed now
11) Run automated tests: prove t/db_dependent/Koha/Patron.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
I've changed the language a bit from "account locked out" to
"account locked" and split it up to ease translation.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Just what the title says :)
Specifically: moremember.pl
Test plan:
Check if you see the locked message on the patron form for an account
that has been locked. (Either login_attempts<0 or >FailedLoginAttempts)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the ability for items that are on hold to be renewed with a due date specfied by the user. It is enabled by the new "AllowRenewalOnHoldOverride" syspref. It is manifested in two locations:
1. In the "Checkouts" table on the Patron Details screen. It is now possible to select on loan items that would otherwise fulfil a hold request to be renewed. When such an item is selected, an additional date selection box is displayed to allow the user to specify the due date for all on hold items that are to be renewed.
2. In the Circulation > Renew alert screen. When a barcode of an on loan item that would ordinarily fulfil a hold request is entered, the usual alert is displayed indicating that the item is on hold, it is still possible to override this, and renew, however it is now also possible to specify a due date.
Test plan:
- Go to the Patron Details page for a patron who has an item on loan that would fulfil an outstanding loan request.
- TEST: Observe that it is NOT possible to select this item
- Enable the "AllowRenewalOnHoldOverride" syspref
- Return to the Patron Details page for a patron who has an item on loan that would fulfil an outstanding loan request.
- TEST: Observe that it IS possible to select this item
- Select the item
- TEST: Observe that an additional "On hold due date" input box is displayed
- De-select the item
- TEST: Observe that an additional "On hold due date" input box is hidden
- Select the item
- In the "On hold due date" input box, select a due date for the item
- Click "Renew or check in selected items"
- TEST: Observe that the item is renewed as usual
- In the "Renewal due date" input box, select a due date
- Remove the contents of the "On hold due date" input box
- Click "Renew or check in selected items"
- TEST: Observe that the item is renewed by falling back to the "Renewal due date" value if a value is not specified in the "On hold due date" input box
- Remove the contents of the "Renewal due date" input box
- Click "Renew or check in selected items"
- TEST: Observe that the standard loan period is used for the renewal period if no due date is specified in either box
- In the "On hold due date" input box, select a due date for the item
- In the "Renewal due date" input box, select a different due date
- Click "Renew all"
- TEST: Observe that all non on hold items are renewed using the value in "Renewal due date" and on hold items are renewed using the value in "On hold due date"
- From the main staff client from page, choose "Circulation", then choose "Renew"
- Enter the barcode of an item that you know to be on hold and submit
- TEST: In the alert box that appears, observe that a date picker is
displayed
- Choose a due date for this item, then click "Override and renew"
- TEST: In the "Item renewed" box, observe that the item has been
renewed to the date specified
Sponsored-by: Cheshire Libraries Shared Services
Sponsored-by: Halton Borough Council
Sponsored-by: Sefton Council
Signed-off-by: Andrew Farthing <Andrew.Farthing@sefton.gov.uk>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch:
- removes unused templates
- use objects as much as possible
- remove many template params
Test plan:
1) Apply the patch
2) Play with patron detail page and try to broke it anyhow ;)
- messaging preferences
- enhanced attributes
- guarantors and guarantees
- fines
- messages
- checkouts
- overdues
- use different date formats, price formats and address formats
- ... there is many thinks you could try with this one page ;)
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch updates the patron details page template to use the Bootstrap
grid.
To test, apply the patch and view the detail page for a patron in the
staff client. Adjust the browser width and confirm that the page adapts
to different sizes.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When a hold has been suspended or is waiting, the status
message appears in the Barcode column of the Holds table. This patch
fixes this by adding a separate Status column which details the status
of the Hold, whether it has been suspended, or is in transit, etc.
Test plan:
1) Place an item level hold and a 'Next Available' record level hold for
a patron.
2) View the holds in Patrons->Patron details for that Patron in the Check out and Details tabs
3) Suspend one of the holds, and note that the status appears in the
barcode column
4) Set a hold to be waiting for pickup, and note the status appears in
the barcode column
5) Apply the patch
6) Check the same holds and note that the statuses now appear in the new
column called Status, and note that if a hold has status effect that the
row reads "Hold has been placed"
7) Verify that this is the case in both the Holds tables (in Check out
tab and Details tab)
Sponsored-by: Catalyst IT
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Changes:
- Replace getting preference ExtendedPatronAttributes by Koha.Preference
in templates
- Add Koha::Patron->attributes for getting patrons extended attributes
- Use this method in circ-menu.inc
- Remove getting attributes from members perl scripts
Test plan:
0) Apply the patch
1) Add some patron attributes type - with free text, authorised value,
limited by libraries...
2) Add some values to this attributes for some patrons
3) Go through as many patron pages as you can and confirm that
attributes are shown at side panel when they shoul and are not shown
when they should not be shown
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Removed Koha/Schema/Result/BorrowerAttribute.pm
[EDIT] Added missing semicolon on L114 in Koha/Patron/Attribute.pm
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
DataTables are used on enough pages in the staff client that it
doesn't make sense to put inclusion of the CSS into each template
where it is needed. This patch moves includes of datatables.css from
individual templates into the global header file.
To test, apply the patch and view various pages which have DataTables.
View various styles of DataTables, e.g.
- Full pagination, like item search results
- Four-button, like Saved SQL reports
Everything should look the same as it was.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This follow-up modifies JavaScript so that the confirmation dialog is
triggered when deleting a patron image from the modal window.
The CSS is modified to improve the alignment of patron image and edit
button.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch move the check for "is_expired" to the template and removes
unnecessary code from the script.
The page now correctly handles messages for patrons who are about to
expire, as defined in the NotifyBorrowerDeparture preference.
To test, apply the patch and locate a patron record which is expired.
- On the patron detail page (members/moremember.pl) you should see a
message at the top of the page.
- In the body of the page, next to the expiration date information, you
should see similar message and links.
Select a patron who will expire within the period defined in
NotifyBorrowerDeparture.
- On the patron detail page you should see a message at the top of the page.
- In the body of the page, next to the expiration date information, you
should see similar message and links.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the patron detail template in the staff client so
that when a patron's registration is expired a message shows at the top
of the page along with the same "Renew" and "Edit" links which appear on
the checkout page. Links are also shown next the the expiration date in
the body of the page.
This patch also corrects the capitalization of the "Edit Details" link
on circulation.tt.
To test, apply the patch and locate a patron record which is expired.
- On the patron detail page (members/moremember.pl) you should see a
message at the top of the page.
- In the body of the page, next to the expiration date information, you
should see similar message and links.
- On the patron's checkout page the "Edit details" link in the
expiration message should have correct capitalization.
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
1) Go to the patron details for a patron
2) On the right of the screen, right click one of the labels below
'Library use' etc, and Inspect Element
3) View <li> tags which should now each have a unique <id> tag for each
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch has been generated with the script provided on bug 21576.
It only affects variable used in the href attribute of a link *when*
href it the first attribute of the node (grep "a href")
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 11401 introduced code to support Norwegian national library card.
This code is too specific to be part of Koha as it, it should be a
plugin instead.
Moreover nobody uses it, but a modified version (see comment 3).
Test plan:
Add/edit/delete patron and make sure there are no regressions introduced
by these patches
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Make sure the HouseboundModule is enabled in system preferences
2) Go to a patron file
3) Next to Housebound roles, click on "Add"
4) Check "Yes" next to one of the two roles (or both)
5) Click "Save"
6) The "Add" button is now "Edit", click on it
The page is the one to edit housebound roles.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Here we go, next step then.
As we did not fix the performance issue when autofiltering
the variables (see bug 20975), the only solution we have is to add the
filters explicitely.
This patch has been autogenerated (using add_html_filters.pl, see next
pathces) and add the html filter to all the variables displayed in the
template.
Exceptions are made (using the new 'raw' TT filter) to the variable we
already listed in the previous versions of this patch.
To test:
- Use t/db_dependent/Koha/Patrons.t to populate your DB with autogenerated
data which contain <script> tags
- Remove them from borrower_debarments.comments (there are allowed here)
update borrower_debarments set comment="html tags possible here";
- From the interface hit page and try to catch alert box.
If you find one it means you find a possible XSS.
To know where it comes from:
* note the exact URL where you found it
* note the alert box content
* Dump your DB and search for the string in the dump to identify its
location (for instance table.field)
Next:
* Ideally we would like to use the raw filter when it is not necessary
to HTML escape the variables (in big loop for instance)
* Provide a QA script to catch missing filters (we want html, uri, url
or raw, certainly others that I am forgetting now)
* Replace the html filters with uri when needed (!)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Code and variables to deal with the update child feature are not
centralized but copied/pasted in several scripts. Which leads to issues
obsviously (bug 20805 for instance).
Moreover the strings used by the templates are also in several template
files (or .inc)
To deal with that this patch introduces the idea to create 1 .inc file
per .js file
Here we have members-menu.inc for members-menu.js
Test plan:
- Remove all your adult categories (categories.category_type='A')
- Create a patron with a child category
- Try to update to adult category
=> The entry does no longer appears! (This is a change in the behaviour)
- Create one adult category
- Update to adult category
=> There is a JS confirmation message, if you accept the patron will
be updated to the adult category
- Create (at least) another adult category
- Create another child
- Update to adult category
=> No more confirmation message but a popup to select the adult category
- Pick one
=> The patron has been updated to the adult category
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes style and markup changes to the patron detail page
template in order to make the display of information somewhat more
compact and to increase the visibility of the edit controls.
To test you should enable the patronimages system preference. Apply the
patch and view the detail page for a patron.
- Check that the page looks correct and that sections like "Alternate
address" and "Alternative contact" are empty when there is no data.
- Check that the "Manage patron image" tool works correctly.
Signed-off-by: Cab Vinton <director@plaistowlibrary.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the patron edit process so that "Housebound roles"
can be edited as a separate step.
To test, apply the patch and open an existing patron's detail page
(moremember.tt). Test the "edit" links for 'Housebound roles' and
'Additional attributes and identifiers' and confirm that each opens its
own edit page, and saving changes works correctly.
Signed-off-by: Cab Vinton <bibliwho@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch reindents the template for the patron detail page,
moremember.tt:
- Trailing spaces removed
- Indentation changed to a consistent 4 spaces
- Markup indentation made more consistent
To test, view the patron detail page. There should be no visible
difference before and after the applying the patch.
HTML validation before and after the patch should return the same
results.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
