This patch refactors the previous code and moves the logic from the pl
to a new routine.
Same test plan as previous patch.
/!\ new unit test filename.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 10861: Reintroduced the cardnumber length check (client side)
Previous patches has removed the pattern attribute of the input, it was
not needed. This patch reintroduces it. It will only work for new
browser version.
Moreover, it manages with the ',XX' format (see UT).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Squashed the last two follow-ups. The pattern test did not work fully for me
in Firefox 26 (very recent). But I see the message when I clear the field.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to add a check on the cardnumber length.
This patch adds the ability to restrict the cardnumber to a specific
length (strictly equal to XX, or length > XX or min < length < max).
This restriction is checked on inserting/updating a patron or on importing
patrons.
This patch adds:
- 1 new syspref CardnumberLength. 2 formats: a number or a range
(xx,yy).
- 1 new unit test file t/Members/checkcardnumber.t for the
C4::Members::checkcardnumber routine.
Test plan:
1/ Fill the pref CardnumberLength with '5,8'
2/ Create a new patron with an invalid cardnumber (123456789)
3/ Check that you cannot save
4/ With Firebug, replace the pattern attribute value (for the cardnumber
input) with ".{5,10}"
5/ You are allowed to save but an error occurred.
6/ Try the same steps for update.
7/ Go to the import borrowers tool.
8/ Play with the import borrowers tool. We must test add/update patrons
and the "record matching" field (cardnumber or a uniq patron attribute)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested adding, updating; importing and ran unit test.
Preliminary QA comments on Bugzilla
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes some dead code concerning the handling of patrons
that are members of other, institutional patrons. This code did not
work; removing it clears the field if somebody wants to do a better
implementation of such relationships between patrons.
This patch:
[1] Removes the memberofinstitution system preference.
[2] Removes the following routines:
C4::Members::get_institutions()
C4::Members::add_member_orgs() (and removing this routine
removes a reference to a borrowers_to_borrowers table that
does not exist).
There should be no changes whatsoever to system functionality with this
patch (with the trivial exception of the absence of the
memberofinstitution system preference).
Test plan:
[1] Look at the code and use grep, git grep, etc. verify this patch
does not remove something in use.
[2] Verify that there are no regressions upon adding or editing
a patron record.
[3] Verify that the memberofinstitution system preference has been
removed
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch corrects some errors with the staff client's patron purchase
suggestions page (members/purchase-suggestions.pl).
To test, apply the patch and make sure the patronimages system
preference is enabled.
- View the purchase suggestions page for a patron whose record has a
patron image attached. The image should appear in the left-hand
sidebar.
- View the page for a patron who has submitted no purchase suggestions.
The message should be styled correctly.
- The toolbar on the page should look correct and work correctly.
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently road types are stored in a specific table in DB. Moreover, an
admin page is present in order to manage them.
This patch proposes to remove this table and this page in favour of a
new authorised value category 'ROADTYPE'.
This patch:
- adds a new AV category 'ROADTYPE' (created from the roadtype table
content).
- remove the roadtype table.
- remove the .pl and .tt file admin/roadtype
- remove the 2 routines C4::Members::GetRoadTypes and
C4::Members::GetRoadTypeDetails
Test plan:
1/ Execute the updatedatabase entry and verify existing roadtypes are
now stored in the AV 'ROADTYPE'.
2/ Verify you can add/update a streettype for patrons.
3/ Verify on following pages the streettype is displayed in patron
information (top left):
circ/circulation.pl
members/memberentry.pl
members/moremember.pl
members/routing-lists.pl
Signed-off-by: Sophie Meynieux <sophie.meynieux@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This script is no longer used, and in addition has problematic
handling of its parameters that could lead to writing to
arbitrary files on the server.
To test:
[1] Verify that member-picupload.pl is no longer referred
to in the codebase after applying this patch.
[2] Verify that there are no regressions in patron
photo management.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Found no regressions in removing this script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the renewal count to the 'Check out' and "Details' tabs
of the patron record.
This information already exists in the OPAC view of the patron record.
Since librarians might be serving patrons in person who want to know
this information without looking it up online, it makes sense to show
it in the staff client.
There may also be times where librarians want to see how many renewals
a patron has left, how many they've used already, etc. when making other
decisions.
_TEST PLAN_
Before applying:
1) Go to "Check out" with a patron that has some check outs before today
2) Add some check outs for today
*Ensure that all issues are for items that can be renewed*
3) Note that the Renew column just says '0' followed by a check box
4) Check the 'Detail' tab. It should say the same.
Apply the patch.
5) View the "Details" and "Check out" tabs again
6) Note that the renewal count now appears in the form resembling:
5 of 5 renewals remaining
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The method of checking the logged in user for superlibrarian privileges
is obtuse ( $userenv && $userenv->{flags} % 2 != 1 ) to say the least.
The codebase is littered with these lines, with no explanation given. It
would be much better if we had one subroutine that returned a boolean
value to tell us if the logged in user is a superlibrarian or not.
Test Plan:
1) Apply this patch
2) Verify superlibrarian behavior remains unchanged
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a bug where using the patron editor to add a new
restriction overwrote the first existing one.
Test Plan:
1) Edit a patron, add a restriction
2) Edit the patron again, add a second restriction
3) Note the first restriction has disappeared!
4) Apply this patch
5) Edit the patron again, add another restriction
6) Note the previous restriction is not longer removed
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested:
- Adding and removing multiple restrictions from
- the details tab
- the checkouts tab
- the edit patron form
All works as expected.
Patch passes all tests in t, xt, and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
ModMember supposes the password given in parameter is the
password string, so if it receives the encrypted password,
it will encrypt it again! By simply deleting the password key
from the hash, ModMember leaves the password unchanged.
Test plan:
1/ Create or choose a child patron
2/ Update it to an adult category using the
"Update child to adult patron" link
3/ Try to log in at the OPAC with this patron: It is not
possible, the password has changed
4/ Apply the patch and try again previous steps
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed the problem and tested the patch fixes it.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the message that is displayed when attempting to
view circ history for the anonymous patron more informative. It
also removes a potential source of log noise if the AnonymousPatron
system preference happens to be set to a blank value.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When using an anonymous patron to anonymise issues history, this patron
may have a huge number of old issues. In this case, trying to display
the reading history of this patron will perform a huge SQL query.
It is not useful to have the reading history of this anonymous patron.
This patch adds an alert instead of old issues when displaying reading
records of anonymous patron.
Test plan :
- Set syspref AnonymousPatron to 0.
- Select a borrower with old issues. For example 123.
- Look at its reading records page : members/readingrec.pl
=> Old issues are displayed in a datatable
- Set syspref AnonymousPatron with this borrower number. For example 123.
- Look at its reading records page
=> Old issues are not displayed and an alert is displayed
- Using SQL query, remove old issues of this borrower :
DELETE FROM old_issues WHERE borrowernumber=123.
- Look at its reading records page
=> A message is displayed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works as advertised and seems like a reasonable thing to do. I
suspect that someone will object... Perhaps that person will implement a
solution which uses an AJAX DataTable.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
1/ edit a patron
2/ set a sms alert number
3/ save
4/ edit the patron
5/ set the sms alert number to a blank value
6/ save
7/ the sms number is now an empty string
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Test plan used:
- Activate the SMS functionality by giving a 'fake'
SMSSendDriver of TEST
- Activate EnhancedMessagingPreferences
- Create a new patron, set Other phone to 'test'
- Notice that Other phone was copied to sms number
- Edit messaging preference section using the edit link
below on the details tab and delete SMS number
- Verify it's not possible to unset the SMS number
- Apply patch
- Repeat deleting - this time it works
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch:
- changes the GPL version from 2 to 3.
- uses the datatables.inc file
- removes the single pixel before and after the DT (modifying the sDom
value).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new tab to the patron side menu for purchase
suggestions. From this new tab, a librarian can view the patron's
existing purchase suggestios and also create new suggestions in the
name of that patron.
Test Plan:
1) Apply patch
2) Ensure the system preference 'suggestions' is enabled
3) View the details for a patron
4) Click the new 'Purchase suggestions' tab
5) Click the 'New purchase suggestion' button
6) Add the new purchase suggestions
7) You should now end up back at the borrower's purchase suggestions
8) Verify the new purchase suggestion was added
Signed-off-by: Corey Fuimaono <agent.075@gmail.com>
Step though the test plan. All OK.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
1/ Edit a patron
2/ Add a restriction with a date (in any format other than iso)
3/ Note the date is not saved
4/ Apply patch
5/ Add restriction again, note it is saved
The problem is output_pref was being called with the wrong parameters
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Note: The issue in on the memberentry form only (not the restriction
form on the check out page).
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a more extensible and flexible debarments system to Koha. The fields
borrowers.debarred and borrowers.debarredcomment are retained for compatibility and
speed.
This system supports having debarments for multiple reasons. There are currently
three types of debarments:
OVERDUES - Generated by overdue_notices.pl if the notice should debar a patron
SUSPENSION - A punative debarment generated on checkin via an issuing rule
MANUAL - A debarment created manually by a librarian
OVERDUE debarments are cleared automatically when all overdue items have been returned,
if the new system preference AutoRemoveOverduesRestrictions is enabled. It is disabled
by default to retain current default functionality.
Whenever a borrowers debarments are modified, the system updates the borrowers debarment
fields with the highest expiration from all the borrowers debarments, and concatenates
the comments from the debarments together.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify the borrower_debarments table has been created and
populated with the pre-existing debarments
4) Run t/db_dependent/Borrower_Debarments.t
5) Manually debar a patron, with an expiration date
6) Verify the patron cannot be issued to
7) Add another manual debarment with a different expiration date
8) Verify the 'restricted' message lists the date farthest into the future
9) Add another manual debarment with no expiration date
10) Verify the borrower is now debarred indefinitely
11) Delete the indefinite debarment
12) Verify the debarment message lists an expiration date dagain
13) Enable the new system preference AutoRemoveOverduesRestrictions
14) Set an overdue notice to debar after 1 day of being overdue
15) Check out an item to a patron and backdate the due date to yesterday
16) Run overdue_notices.pl
17) Verify the OVERDUES debarment was created
18) Return the item
19) Verify the OVERDUES debarment was removed
20) Disable AutoRemoveOverduesRestrictions
21) Repeat steps 15 though 18, verify the OVERDUES debarment was *not* removed
22) Add issuing rules so that an overdue item causes a temporary debarment
23) Check out an item to a patron and backdate the due date by a year
24) Return the item
25) Verify the SUSPENSION debarment was added to the patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When printing a payment receipt, the payment did not display, only the
total currently owed.
Test Plan:
1) Create a payment for a borrower
2) Print the payment with the "print" button to the right of the payment
3) Note the missing payment line
4) Apply this patch
5) Repeat step 2
6) Note the payment line now displays
Signed-off-by: cedric.vita@dracenie.com <cedric.vita@dracenie.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha::DateUtils::output_pref took 4 parameters and the last one is a
boolean, so some calls were:
output_pref($dt, undef, undef, 1)
This patch changes its prototype to
output_pref({
dt => $dt,
dateformat => $dateformat,
timeformat => $timeformat,
dateonly => $boolean
});
An alternative is to call the output_pref routine with a datetime
object, without using an hashref:
output_pref($dt);
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The patron lists feature is somewhat similar to the record lists feature
in that it allows a librarian to create a list of patrons for later
retrieval and manipluation. These lists can then be used with the batch
patron modification tool.
Test Plan:
0) Apply the patch for Bug 8798
1) Apply this patch
2) Run updatedatabase.pl
3) Access the patron lists feature from Koha's Tools menu.
4) Create a new list via the "New patron list" button.
5) For this list, click the "Edit" button, and change the list name.
6) For this list, click the "Add patrons" button, and search for and
add some patrons to your list.
7) For this list select some patrons to remove them.
8) Try both adding some new patrons, and removing some old patrons
as a single action.
9) Click the "Patrons" link on the Koha toolbar
10) Search the patrons, or browse by letter to get patron results
11) Check the checkboxes next to one or more patrons, and add the
selected patrons to your existing list.
12) Change the "Selected patrons" pulldown to "All resultant patrons"
and add them to your list.
13) Check the checkboxes next to one or more patrons, and add the
selected patrons to a new list.
14) Try manipulating a list of patrons using the batch patron
modification tool.
15) Go back to the Patron Lists feature and delete your lists.
16) Run 'prove t/db_dependent/PatronLists.t'
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable patronimages
4) Verify patron images are still displaying correctly
5) Test deleting a patron image
6) Test adding a patron image from moremember.pl
7) Test adding a patron image from tools/picture-upload.pl
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The move avoids a problem where many modules would gain
a dependency on C4::Auth just because C4::Members needs access
to hash_password().
This patch also adds a couple unit tests for the new password
hashing code.
To test:
[1] Verify that there are no regressions on the test plan for bug
9611.
[2] Verify that t/AuthUtils.t and t/db_dependent/Auth.t pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
What this patch aims to accomplish?
* All new passwords are stored as Bcrypt-hashes
* For password verification:
- If the user was created before this patch was applied then use
MD5 to hash the entered password <-- backwards compatibility
- If the user was created after this patch was applied then use
Bcrypt to hash the entered password
* Any password change made via the staff interface or the OPAC will
be automatically Bcrypt-hashed; this applies to old users whose
passwords were stored as MD5 hashes previously
Test plan:
1) Add new users and check whether their passwords are stored as
Bcrypt hashes or not.
2) To test that authentication works for both old as well as new
users:
a) Login as an existing user whose password is stored as a
MD5 hash
b) Login as an existing user whose password is stored as a
Bcrypt hash
3) In the staff interface, change the password of an existing user
whose password is stored as an MD5 hash
a) Check the new password is stored as a Bcrypt-hash in the database
b) Try to login with the new password
4) In the OPAC, verify that
a) Old user with old pass can change password, new format
b) New user with new pass can change password
c) Old and new user with self-updated pass can login
Whitespace cleanup was contributed by Bernardo Gonzalez Kriegel.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
[1] In the staff interface, enter nothing in the patron search box
and hit the search button.
[2] Note the errors in the logs concerning an uninitialized $count
variable.
[3] Apply the patch and repeat step 1. Note that this time, no
warnings are logged.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test
1/ Uncomment the use warnings line
2/ Search for a patron, notice all the warnings
3/ Browse for a patron, notice warnings
4/ Apply patch
5/ Repeat 3 and 4
6/ Notice no errors and the search still works
This depends on the patch for Bug 10835
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, no regressions found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Previously printing a fine invoice would result in a page with both the
single item charge and the total outstanding amount. Right now only the
total outstanding is printed.
Test Plan:
1) Print a fine, note the fine doesn't show, only the total
2) Apply patch
3) Print a fine, not the fine does show
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The patron search type option "contains" works fine for multiple
strings, but returns no results for a single string search. For example,
the patron "Henry Acevedo" will be returned for a "contains" search
"en ev" but not for just "en" or "ev".
Test Plan:
1) Create 2 patrons named "Test One" and "Test Two"
2) Run a "contains" search for the term "est"
3) Note no results were found
4) Apply this patch
5) Repeat step 2
6) Note the patrons now display in the search results.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Also checked that 'starts with' still works as expected -
searching for ev will only return "Eva Dillon" from the
example patrons in this case.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds subtitles (from Keyword to MARC mapping) to the
following tables on the checkout page:
- Checkouts
- Previous checkouts
- Relative's checkouts
- Relative's previous checkouts
- Holds
Additionally it suppresses the appearence of the superfluous word "by"
in cases where the biblio has no author.
Test scenario:
--------------
1)
Make sure that you have one or more fields mapped to subtitle in:
Home . Administration . Keyword to MARC mapping
(e.g. 245 b)
2)
Test the checkout page with patrons having
- current checkouts (today)
- previous checkouts
- relatives (e.g. kids) with current /previous checkouts
- holds on items
- holds on biblios
...with items having:
- title, subtitle, author
- title, no subtitle, author
- title, subtitle, no author
- title, no subtitle, no author
3)
Do the same on patron's detail page
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
- Place a hold request for a patron
- From the patron details page, navigate to the holds table,
then cancel (delete) it.
- Verify that the hold request is gone.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If a warning about a duplicated patron attribute is returned,
the value was being passed back for display in the warning
message with the same name as the variable in errors
As the message is displayed in the context of errors
the error value 1 was being displayed not the value
duplicated as intended.
Pass the value to the template with a unique name.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I fixed another tiny typo while signing off: "is already in use" instead
of "is already is use."
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When viewing the list of a patron's holds on the circulation page or the
patron detail page the table of holds doesn't display the holds
expiration date, if present. This patch adds display of the hold
expiration date.
To test, place a hold for a patron and set an expiration date for it.
View the patron's existing holds on both circulation.pl and
moremember.pl. The expiration date you chose should appear in the table
of information about existing holds.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
works great
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Code will also respect notes when using the "Writeoff All" button but WILL NOT when using either the "Pay Amount" or "Pay Selected" buttons Fixed uri encoding of arguments
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- Remove "all" occurrences (those I found!) of dateformat_*
From now the only way to get the date format is a string comparaison
(dateformat == "metric")
Checked with the command:
git grep "\(dateformat_us\|dateformat_metric\|dateformat_iso\)" | grep
-v translator
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tested all the datepickers I could find, looks good.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some files have the old 59 Temple address instead of the 51 Franklin
street.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I see lots more which will need to be corrected as well.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Corrects addresses in 3 files.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When the patron detail page switched to DataTables no accommodation was
made for metric date formats in sorting.
This patch adds sorting based on data in a span's title attribute, and
thus requires that the patch for Bug 9887 be applied.
To test, view the detail page for a patron who has assorted checkouts,
relatives' checkouts, and holds. Sorting of date columns should be
correct with the dateformat preference set to any value.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Nice improvement.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In current implementation (mostly commented out in this patch)
uses heuristic to guess which strings need decoding from utf-8
to binary representation and doesn't support utf-8 characters
in templates and has problems with utf-8 data from database.
With this changes, Koha perl code always uses utf-8 encoding
correctly. All incomming data from database is allready
correctly marked as utf-8, and decoding of utf8 is required
only from Zebra and XSLT transfers which don't set utf-8 flag
correctly.
For output, standard perl :encoding(utf8) handler is used
so it also removes various "wide character" warnings as side-effect.
Test scenario:
1. make sure that you have utf-8 characters in your biblio
records, patrons, categories etc.
2. try to search records on intranet and opac which contain
utf-8 characters
3. install language which has utf-8 characters, e.g. uk-UA
dpavlin@koha-dev:/srv/koha/misc/translator(bug_6554) $
PERL5LIB=/srv/koha/ perl translate install uk-UA
4. switch language to uk-UA and verify that templates
display correctly
5. test search and Z39.50 search and verify that caracters
are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I followed the test plan, adding utf-8 characters to library names,
patron categories, titles, and authorized values. I tried the uk-UA
translation and everything looked good.
When performing Z39.50 searches for titles containing utf-8 characters I
got results which were still occasionally contaminated with dummy
characters [?] but I assume this is Z39.50's fault not the patch's.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Already signed, add mine.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The routing list tab displays on patron pages even if the RoutingSerials
preference is OFF. Display of the tab should be conditional on that pref
being turned on.
This patch adds a check for the RoutingSerials preference to the menu
include files and amends the affected scripts to make the variable
available on the pages where those includes are used.
To test, view the following pages with RoutingSerials both on and off.
The routing list tab should be shown and hidden accordingly:
- Circulation
- Patron details
- Patron fines
- Pay fines
- Pay amount/selected (click from the Pay fines page)
- Create manual invoice
- Create manual credit
- Patron circulation history
- Patron modification log
- Patron notices
- Patron routing lists
- Patron statistics
- Patron files
- Patron permissions
- Set patron password
- "Can't delete patron" page (try to delete a patron with checkouts).
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Touches a lot of files, but only a tiny change in each, works well.
Could perhaps be set in C4/Auth instead, but that's no reason not to
sign off
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When modifying a patron through different pages, the userid
generation does not behave always the same way; this patch
corrects this:
- when firstname and surname are present in the form, they
are used for the generation;
- if there are not in the form, the firstname and surname
in database are used instead.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Test
This patch lacks a test plan, so I do the following
1) New user, empty userid, autocompleted
2) Edit user, change userid, saved correctly
3) Edit user, main edit window, emptied userid, autocompleted
4) Edit user, Detail > Library use, emptied userid, not autocomplete (not even a dot)
5) Applied patch
6) Repeated 1-3, same behavior
7) Repeated 4), now autocompletes with same userid as 3)
So, works as described.
No koha-qa errors.
NOTE: It's impossible now to delete userid from interface.
Off-topic: tried an userid in Arabic, works very well.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When renewing a patron from the patron details page, ensure that
the "Patron's account has been renewed until XXX" is actually
displayed.
This patch introduces a was_renewed CGI and template parameter
to clarify the intent of the relevent template sections.
To test:
- Before applying the patch, renew a patron from the patron
details page and verify that you don't see the renewal confirmation.
- After applying the patch, renew the patron from the details page
and verify that the "Patron's account has been renewed until XXX"
message shows up.
- Renew the patron from the checkout page and verify that the confirmation
message shows up.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Message now displays for both tabs.
Fixed tab to make QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When OpacMaintenance is on, any opac page will redirect to maintenance.pl.
Some pages of intranet have the same behavior and you get 404 error.
This is because in checkauth, if type arg is undefined it is "opac" by default.
This patch adds type arg in all intranet calls of checkauth.
Test plan :
- Set syspref OpacMaintenance=Show
- Go to a borrower page
- Click on "Fines" and "Create manual invoice"
- Enter an amount and save
=> Check you go to members/boraccount.pl and not maintenance.pl with 404 error
OK
- Click on "Fines" and "Create manual credit"
- Enter an amount and save
=> Check you go to members/boraccount.pl and not maintenance.pl with 404 error
OK
- Edit borrower
- Set "Restricted" to yes and save
- Click on "Lift restriction" in messages
=> Check you keep in member page and not maintenance.pl with 404 error
OK
- Edit borrower
- Set "Expiry date" to a day in the past and save
- Click on "Renew" in messages
=> Check you keep in member page and not maintenance.pl with 404 error
OK
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Good catch, a tricky bug.
http://bugs.koha-community.org/show_bug.cgi?id=9952
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Removed a few tabs from mancredit.
All tests and QA script pass now.
Good test plan.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch corrects several uninitialized value errors.
Test plan:
- Edit a borrower
- Enter a surname using lowercase (it will be displayed uppercase by CSS) and save
=> Borrower surname is uppercase
- Edit an organisation (depends on borrower category)
- Enter a surname using lowercase (it will be displayed uppercase by CSS) and save
=> Borrower surname is uppercase
- Go to a borrower page who has today issues
- Click on More/Export today's checked in barcodes
=> You get a file to dowload
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This follow up reinstates or add check for undef returned
by C4::Context->userenv, only where previous patch touch
code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch replace use of CGI::scroll_list() to show list of branches.
In two files, marc21_linking_section.pl and unimarc_field_4XX.pl,
the scrolling list is created but not used in the template file,
so the code is removed.
Also minor renaming/normalizing of variables.
To test:
1) Install with some branches, records and patrons
2.1) Select a record, click 'Place hold', select user,
there is a library pull-down next to 'Pickup at:',
list is ordered case sensitive
2.2) Go to Reports > Average loan time,
next to Library is a pull-down,
list without order
2.3) Go to Reports > Catalog by item type,
next to 'Select a library' is a pull-down,
list is ordered case sensitive
2.4) This is tricky, go to Reports home,
change last part of URL 'reports-home.pl' with
'manager.pl?report_name=issues_by_borrower_category'
(can't find a direct link), next to 'Select a library'
is a library pull-down,
list without order
2.5) Edit/Add a patron, on section 'Library management'
there is a library pull-down, case sensitive
2.6) OPAC, as logged user, make a suggestion or hold,
there is library pull-down, correct order
3) Apply the patch
4.1) Repeat 2.1), correctly ordered list
4.2) Repeat 2.2), correctly ordered list
4.3) Repeat 2.3), correctly ordered list
4.4) Repeat 2.4), correctly ordered list
4.5) This is a bit more work
There are 3 possible situations to test:
A) No branches, must show a message that are no
libraries defined
B) New patron, must show a correctly ordered
list of branches, current branch selected
C) Edit patron, must show a correctly ordered
list of branches, patron branch selected
4.6) Small changes on variable names, so retest 2.6)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch rewrites the GetReserveStatus routine in order to take in
parameter the itemnumber and/or the biblionumber.
In some places, the C4::Reserves::CheckReserves routine is called when
we just want to get the status of the reserve. In these cases, the
C4::Reserves::GetReserveStatus is now called.
This routine executes 1 sql query (or 2 max).
Test plan:
Check that there is no regression on the different pages where reserves
are used. The different status will be the same than before applying
this patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, if $ENV{DEBUG} is set (for example to 1), the debug level
will be printed on the Add/Edit Patron pages (memberentrygen.tt) in the
form of: "Debug is on (level 1)".
While many if not most folks might not set $ENV{DEBUG} on a production
system, there is no reason to have this information printing on the
member template(s).
No where else in Koha is there a template that prints $ENV{DEBUG}
information, with the exception of calendar.inc, although that doesn't
activate until at least debug level 2 or 5, so it might be worth holding
on to. It is certainly more complicated than simply printing the debug
level. I don't do development on the calendars, so I'm not going to
address that one.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The subroutines writeoff() and get_writeoff_sth() (and the two package
variables $writeoff_sth and $add_writeoff_sth) defined in members/pay.pl
are not used at all.
To test:
1) View members/pay.pl by looking at the record of a patron who has
at least seven fines/fees and clicking the "Pay fines" tab after
clicking the "Fines" tab on the left side
2) Write off a single item in the table on members/pay.pl using the
button labelled "Write off"
3) Pay a single fine by clicking the "Pay" button
4) Pay a portion of a fine by selecting a checkbox on one of the lines
in the table and clicking the "Pay amount" button
5) Select two lines in the table and click the "Pay selected" button
6) Write off all remaining fines
If all your actions show up in the table on the Account tab, this patch
works.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test Plan:
1) Write off fines as various branches
2) Observe the stats lines include the wrong branchcode
3) Apply patch
4) Repeate step 1
5) Observe the stats lines include the correct branchcode
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Also tested by changing branch and writing off again - all
tests pass.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked individual and complete write off for different branches.
Write offs were always recorded correctly for the logged in branch.
All tests and QA script pas.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
For a duplicated patron, the "Saluation" information
is now empty by default.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a patron lives at 4345 Library Rd, a search on Street Address for
Library should find it. However, it does not, but a search for 4345
Library does. This patch adds a "Search Type" drop-down, defaulting
to the current behaviour.
To test:
1) Search for a patron based on a non-leading part of a field.
2) Should return no results.
3) Search again with "Search Type" of "Contains".
4) Should return the patron.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- the DHTMLcalendar_dateformat variable is unused
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts:
- opac/sco/sco-main.pl
- reports/acquisitions_stats.pl
- tools/cleanborrowers.pl
All tests pass, perlcritic problems appeared in some files
before and after these patches were applied.
Checked sorting in following pages:
- acqui/addorderiso2709.tt - list of staged imports in acq
- acqui/histsearch.tt - sorting of dates in acq search result list
- acqui/invoices.tt - billing date in list of invoices in acq
- acqui/lateorders.tt - list of late orders in acq
- acqui/ordered.tt - ordered titles and estimated costs for a fund
- acqui/parcels.tt - receive shipment page
- acqui/spent.tt - received titles and actual costs for a fund
...
- serials-search.tt - subscription search result list
...
- opac/sco/sco-main.tt - due dates in list of checked out items
- reports/acquisitions-stats.tt - date searches, display of dates
- tools/cleanborrowers.tt
- tools.holidays.tt - different views of dates library is closed,
adding dates
Checked dates display according to system preference everywhere and
searching, entering dates etc. still worked as expected.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Moving text of an error message from the script into the
template. To test, submit an amount which is greater
than the amount due. You should see an error message
displayed correctly with a properly-formatted currency
amount.
Signed-off-by: Marc Veron <veron@veron.ch>
Patch behaves as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The staff client has two almost identical include files which
can be consolidated: circ-toolbar.inc and members-toolbar.inc.
This patch marges the slight differences between them and
eliminates circ-toolbar.inc, that being the one which was used
on fewer pages.
In order to accommodate the different "destination" variable
for operations which redirect back either to circ or patrons,
circulation.pl defines "destination" in the template.
Revision corrects a redirect error in setstatus.pl which
predates this patch but which never showed up until now.
To test, perform various operations from the toolbar on at least
two pages: circulation.pl and moremember.pl.
Operations: Edit, add child, duplicate, change password, print (all
options), search to hold, renew, set permissions, delete, update child
to adult, and export checked-in barcodes. In most cases simply
confirming that the link takes you to the right place is enough.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- Adding simple style to register link on home page
- Adding unique ids to new pages and to blocks containing
registration links
- Adding better page titles and breadcrumb links to some pages
- Correcting bug which meant incorrect message showed on registration
page when OPACPatronDetails preferences is turned off
- Passing patron details to opac-memberentry.tt so that patron's
name can be displayed in breadcrumbs
- Improving display in staff client of patron record updates
waiting to be approved.
- Adding a sort by name to output of pending patron record updates
- Adding updated JqueryUI library files to include expanded widget
options.
The changes in this patch require the addition of the jQueryUI
Accordion widget. Other pending patches are seeking to add
enough of the other remaining missing widgets that it seems time
to go ahead and add the rest.
Future submissions which add usage of these widgets will have
to be careful to make changes to Koha's CSS where necessary.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In a librairies network, we would like to declare specific values just
for one (or more) library.
Here we implement the ability to associate categories, patron attributes
types and/or authorised_values with librairies (branches).
This patch adds 3 new association tables:
- categories_branches ( association table between categories and branches )
- authorised_values_branches ( association table between
authorised_values and branches )
- borrower_attribute_types_branches (association table between
borrower_attribute_types and branches )
Plan test:
- Create (or modify) categories, patron attributes and
authorised_values and link it with one (or more) library.
- Set one of these librairies
- Go to one of the multiple pages where this specific value must be displayed
and check that it does appear.
- Set a library not concerned.
- Check on the same pages this value is doest not appear.
A page list:
cataloguing/addbiblio.pl
cataloguing/additems.pl
members/members-home.pl
members/memberentry.pl
acqui/neworderempty.pl
tools/modborrowers.pl
and others :)
Please say me if filters don't work on some pages.
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds the "alphabet" syspref, which can hold a space separated list
of charachters, which can be expanded into browse links when needed.
To test:
- Make sure to run updatedatabase
- Check that the "alphabet" syspref was added under "I18N/L10N preferences"
- Check that browse links are displayed Home › Patrons
- Add some weird charachters like ÆØÅ to "alphabet" and check that the
browse links are still displayed ok
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Stéphane Delaune <stephane.delaune@biblibre.com>
Signed-off-by: Marc Veron <veron@veron.ch>
NOTE: After applying the patch I got following errors in members/pay.pl:
Global symbol "$writeoff_sth" requires explicit package name
Global symbol "$add_writeoff_sth" requires explicit package name
Added to lines at the begin of members/pay.pl:
our $writeoff_sth;
our $add_writeoff_sth;
Now the patch worked as expected.
However I am not quite sure if signing off is OK in this situation.
Marc
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
GetAllIssues can produce large lists
For performance purposes:
Dont loop over the list without cause
Dont do expensive processing in the loop
Dont needlessly copy the array
Do display formatting in the template
Dont extract the barcode list unless we are producing it
Reduce db calls by using the data to hand
Make the table in the template a bit more readable
where everything was stuffed into one line
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
.. by blanking cardnumber in the code and showing it in the template,
instead of just not showing it in the template
Autobarcode now correctly fills in on a duplicated patron.
Signed-off-by: Melia Meggs <melia@test.bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adding the necessary code for patron image, patron
home library, patron category description, and patron
extended attributes to show in the left-hand sidebar.
Signed-off-by: Melia Meggs <melia@test.bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adding back the line in the script which pulls the name
of the branch where the item was checked out.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
dcook: fixed SQL error and removed blank targets
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Thanks. Works as described. Valuable addition on patron information
page.
Ideas of enhancement:
- For some library, and some patron, the routing lists table could be
very long, and a paged table would be a plus.
- In the table, a new Vendor column.
- The possibility to sort the table entries by Title and Vendor column.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Works as expected. Fields with disallowed characters do not show up.
Added 'if $debug' to an pseudo-unconditional warn.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Currently, error message reports an age range in English. For example '0 to
17'. With this patch, the 'to' is not in the .pl file anymore.
Ruth could you sign-off this fix?
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch works around the redefinition of an array that was causing the
enforcement of age ranges to not-happen.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I can confirm the bug and the solution.
As noted in comment #4 by Jonathan Druart, this should be fixed in every call
to DateTie::truncate function. This patch does exactly that.
julian_m tested that truncate( to => 'days' ) didn't actually do anything, so
it is understandable that this 'fix' might introduce new bugs as we might have
'fixed' at a higher libs level this issue.
'minutes' is used in truncate function too, so fixing.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds the ability to attach unlimited arbitrary files to
a borrower record.
Test Plan:
1) Enable system preference EnableBorrowerFiles
2) Look up borrower record, click 'Files' tab on left
3) Upload a file, download the file, delete the file.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
rebased for current master.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
rebased again; some indentation issues in include menus.
Comparation of date and datetime is always false
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Exported file contains the list of checked in items.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds a new 'statistics' tab in the Patron module.
For a borrower, this tab contains a table with:
- number of checkout for today
- number of checkin for today
- "precedent state", the number of checkouts the patron had yesterday on
its library card
- "actual state", the number of checkouts on the borrower card at the current date
A new syspref (StatisticsFields) contains a list of fields (separated by
pipe (|) on which the table results is based. The default value is
location|itype|ccode
Signed-off-by: Mathilde Formery <mathilde.formery@ville-nimes.fr>
Implements support for Talking Tech I-tiva phone notification for OVERDUE, PREDUE and HOLD notifications.
Overdues respect triggers as configured for the patron's branch.
Predue and Holds notifications respect patron's messaging preference choices.
A new column for phone notification is added if the TalkingTechItivaPhoneNotification system preference is turned on
Record of phone messages being sent to patrons is added to the patron's Notices
tab; notice of success or failure can be retrieved from I-tiva.
See the TalkingTech.README for installation and set-up instructions.
Aside from the control system preference, and the necessary changes to Messaging Preferences
forms to make use of phone notifications, the bulk of the code resides in external
cronjobs.
TalkingTech_itiva_outbound.pl generates the Spec C file to send to I-tiva. Actual transmission
of the file must be handled by the system administrator.
TalkingTech_itiva_inbound.pl processes the received Results file from I-tiva. Getting the
file from I-tiva to Koha is the job of the system administrator, as well.
Both scripts have a --help option with full documentation.
The only necessary change to core Koha behavior is in C4::Letters::EnqueueLetter. The return
value was changed from 0 or 1 (successful addition of letter to message_queue or not), to the actual
insert ID of the letter. This was required by the outbound script to present a unique Transaction ID
for the notice added to the patron's record (so a 'sent' or 'failed' status could be updated). Since
the dbh and sth are not shared, and the last_insert_id() command is table-specific, this should be thread-safe.
No changes are necessary to any parts of Koha, as all usage of EnqueueLetter currently ignores the return value.
To Test:
1. Turn on TalkingTechItivaPhoneNotification system preference
2. Verify that 'phone' is now a valid notification option for patrons on both staff and OPAC side
3. Attempt to set a 'phone' preference for PREDUE or HOLD messaging; attempt should succeed
4. Set up the patron for notices to triggers:
a. include checked out items due in a range of days, including the value set up in their messaging preferences.
b. place several holds, some in position, others waiting for pickup, others in transit.
c. set the patron up to have overdues, overdue by a range of days that includes the delay values for
the patrons branch and categorycode
5. Run TalkingTech_itiva_outbound.pl --type=RESERVE --type=PREOVERDUE --type=OVERDUE --outfile=/tmp/talkingtechtest.csv
The resulting talkingtechtest.csv file should include all the items due on X days (where X is the patrons' preference),
and none of the ones due in other increments. Similarly, overdues messages should be added for each item due by a delay
value as configured; overdues of other numbers of days should be ignore. Holds that are waiting pick up or in transit should
have messages, those still pending should not.
Messages should be added to the patron's notices tab for each issue sent. Verify these messages exist, and all Notices
tokens are replaced with appropriate information.
Repeat, this time with 4c making use of the default branch overdue triggers, instead of branch-specific triggers.
To test the inbound script, create a CSV with rows in the format "<<Message_id>>","<<SUCCESS or FAIL>>"
Message ID should correspond to the final column of the talkingtechtest.csv file (the transaction id) for the message.
Primary Authorship: Ian Walls
Additional modifications: Kyle M Hall
http://bugs.koha-community.org/show_bug.cgi?id=4246
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested and in use in production by two public libraries : Middletown
and Washoe. Both have given their sign off, but don't have git to
actually sign off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Caused by code assuming a the variable $err is a hashref
when it is only a hashref if there is an error.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
* Switch from C4::Dates to $KohaDates
* Fix 'Resume All Suspended All Requests'
* Change button text to follow capitalization rules
* Change 'requests' to 'holds'
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Variable "$borrowernumber" is not available at /srv/koha/members/pay.pl line 112.
Variable "$borrower" is not available at /srv/koha/members/pay.pl line 129.
Variable "$input" is not available at /srv/koha/members/pay.pl line 142.
Variable "$borrowernumber" is not available at /srv/koha/members/pay.pl line 157.
Variable "$user" is not available at /srv/koha/members/pay.pl line 171.
Variable "$input" is not available at /srv/koha/members/pay.pl line 172.
Variable "$input" is not available at /srv/koha/members/pay.pl line 181.
Variable "$borrowernumber" is not available at /srv/koha/members/pay.pl line 187.
Variable "$branch" is not available at /srv/koha/members/pay.pl line 187.
Variable "$borrowernumber" is not available at /srv/koha/members/pay.pl line 222.
Variable "$input" is not available at /srv/koha/members/pay.pl line 239.
Variable "$borrowernumber" is not available at /srv/koha/members/pay.pl line 246.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds the ability to suspend reserves. The new system preference
AutoResumeSuspendedHolds enables the ability to set a date for
a suspended hold to automatically be resumed.
When a hold is suspended, it will continue to increase in priority
as the holds above it are fulfilled. If the first holds in line
to be filled are suspended, the first non-suspened hold in line
will be used when an item can fulfill a hold that has been placed.
http://bugs.koha-community.org/show_bug.cgi?id=7641
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested with the preference on and off:
1. placed several holds in the staff client
2. suspended some with a date
3. suspended some without a date
4. triggered hold message by checking in for hold with suspensions
5. the suspended hold was skipped as it should be
6. tested suspending holds in the OPAC w and w/out dates
7. ran the cron to clear suspensions with dates
All the above tests worked as expected. Signing off.
* group some attributes for a more friendly display
* allow a link between a borrower category and an attribute to display
it only for the specified category
* Attr classes filled with AV 'PA_CLASS' category (you have to create AV
with a new category 'PA_CLASS' to fill class list)
this patch add 2 fields in borrower_attribute_types :
category_code
class
Signed-off-by: Julien Sicot <julien.sicot@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
