1) Visit serials and click "New subscription":
http://localhost:8081/cgi-bin/koha/serials/serials-home.pl
2) Enter '112' on the record input and '1' on the vendor input. Click "Next"
3) 'First issue publication date' -> Enter some date in the past
4) 'Frequency' -> Enter '2/day'
5) 'Subscription start date' Same as step 3)
6) 'Subscription end date' Some date in the future
7) 'Numbering pattern' -> Enter 'Number'
8) Click 'Test prediction pattern'. Click 'Save subscription'
9) On the left side menu -> Click "Serial collection". Click the yellow button 'Edit serials'
10) On the first serial, edit the status to 'Late'. Save.
11) Visit serials claims:
http://localhost:8081/cgi-bin/koha/serials/claims.pl?supplierid=1
12) Input some dates in "From" and "To"
13) Click 'Clear filter'. Notice it doesn't work.
14) Apply patch. Repeat.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Suspending a hold doesn't clear the date from the date picker. When another hold is suspended
the previously used date will show on the date picker but the value is not set on the hold.
Suspending the hold will suspend it indefinitely. Also the link "Clear date to suspend indefinitely"
will not clear the date picker. This patch will make both the Suspend button and the Clear date link
clear the dates from both the date picker and the variable passed on, making the suspending consistent
with what is seen on the date picker.
Test plan:
1) Place 3 holds on a patron.
2) Suspend a hold and set a date for it.
3) Suspend a second hold and notice the previously used date is shown on the date picker.
Note that the hold will be suspended indefinitely.
4) Open the suspending window for the third hold and pick a date. Click "Clear date to suspend indefinitely"
and note the date picker doesn't get cleared. The hold will be suspended indefinitely.
5) Apply patch.
6) Suspend a hold and set a date for it.
7) Suspend a second hold and notice the date picker does not have a preset date.
8) Pick a date and clear it with the "Clear date to suspend indefinitely link".
See that the date picker also gets cleared.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Inside k-t-d, run:
cypress run --spec t/cypress/integration/flatpickr_spec.ts
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This fixes the problem noted in the bug:
[WARN] DBIx::Class::ResultSetColumn::new(): Attempting to retrieve non-unique column 'biblionumber' on a resultset containing one-to-many joins will return duplicate results. at /usr/share/koha/Koha/Objects.pm line 421
We are taking a list of items, assuming the scenario is that these are from a single biblio and possibly some host_items, then searching and ordering conditionally on whether the biblio is a serial.
Current code gets the first biblio from the list - this patch adds a 'DISTINCT' to the results ebfore fetching the column
To test:
1 - Find a biblio in the staff interface
2 - Transfer one of the items a few times
3 - Recreate the issue on the command line:
export DBIC_TRACE=1
perl -e 'use Koha::Items; my $items = Koha::Items->search({biblionumber=>9})->search_ordered(undef,{ prefetch => ['issue','current_branchtransfers'] }); $items->next'
4 - Note warning:
DBIx::Class::ResultSetColumn::new(): Attempting to retrieve non-unique column 'biblionumber' on a resultset containing one-to-many joins will return duplicate results. at /kohadevbox/koha/Koha/Objects.pm line 426
5 - Apply patch
6 - Repeat 3
7 - Error is gone
Signed-off-by: baptiste <baptiste.bayche@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Use currency.active to test `int(1) DEFAULT NULL` now that itemtypes.notforloan
is `NOT NULL DEFAULT '0'`
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a "title notes tab" option to the opacSerialDefaultTab
preference.
To test, apply the patch and restart services.
- Go to Administration -> System preferences -> opacSerialDefaultTab.
- There should now be a new options, "title notes tab."
- Set the preference to the new value.
- Go to the OPAC and locate a bibliographic record which is associated
with a subscription and which has data in a 5XX notes field.
- On the bibliographic detail page the "Title notes" tab should be
selected by default.
- Test that the other system preference values still work correctly too.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch hides the "Update linked biblio" option for titles that have been created with no linked biblio record
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
prove t/db_dependent/api/v1/erm_eholdings_titles.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch makes biblio creation on local title creation optional.
Test plan:
1) Navigate to the local title creation form
2) Create a title and leave the "Create record" box unchecked
3) Submit the form
4) Search the catalogue for the title you have just created - no biblio result will be available
5) Repeat steps 2 - 3 but this time check the box to create a record
6) You should now be able to find a record in the catalogue for the title you just imported
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds an expandable "panel" in the user dropdown menu in the
staff client. Expanding the panel will load the form from
set-library.pl, including library, desk and register options if present.
The patch moves the contents of desk_selection.js and
register_selection.js into staff-global.js so that the functionality is
available on every page.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
Test plan stolen from Bug 36572:
1. Have 3 staff accounts to test:
-STAFF A: superlibrarian
-STAFF B: loggedinlibrary permission
-STAFF C: no loggedinlibrary or superlibrarian permission
2. Enable 'UseCirculationDesks' and create some desks. (Admin >
Circulation desks)
3. Enable 'UseCashRegisters' and create some registers ( Admin > Cash
registers)
4. Use STAFF A ( superlibrarian ) and make sure you can change branch,
desk and register.
5. Use STAFF B ( loggedinlibrary permission ) and make sure you can
change branch, desk and register.
6. Use STAFF C ( no loggedinlibrary or superlibrarian permission ) and
make sure you can change branch, desk and register.
7. Each time you change you should be redirected to the page you were
previously on.
8. Turn off UseCirculationDesks, make sure everything still works.
9. Turn off UseCashRegisters, make sure everthing still works.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
There's not a simple way to handle sorting of a column containing only
checkboxes, so I think it makes sense to remove the sorting unless
someone feels strongly about it being necessary.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch takes advise from elasticsearch-mappings.js and adds an
onsubmit event to clear any DataTables filter before submitting. This
should prevent hidden fields from being overwritten.
To test, filter the table and make a change to one of the visible rows.
After submitting, confirm that the previously-hidden rows retain the
same settings as before.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a basic DataTables configuration to the table of patron
categories on the Overdue notice/status triggers page. The table can be
sorted by patron category and can be filtered.
To test, apply the patch and go to Tools -> Overdue notice/status
triggers.
- Confirm that the table of patron categories is sorted by default by
patron category
- Other columns should not be sortable
- You should see a search field above the table which works to filter by
patron category.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
PA amended: Squashed borrower_attribute_types table update
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan, k-t-d:
1) Apply patches.
2) Run the following SQL and save the output of each:
SHOW CREATE TABLE pseudonymized_borrower_attributes;
SHOW CREATE TABLE borrower_attribute_types_branches;
SHOW CREATE TABLE borrower_attributes;
SHOW CREATE TABLE borrower_attribute_types;
3) Run updatedatabase
4) Run the SQL queries again, compare the output of each with the previous output before updatedatabase.
5) Make sure the only diff between the two is VARCHAR(10) -> VARCHAR(64)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
So that this functionality can be controlled separately from staff-side batch checkouts
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This tidies the whole file as the patchset touched so much that we
basically needed to tidy all to make the QA scripts clean.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This enhancement modifies the self-checkout script to better handle 'impossible' and 'needs confirmation' checkout messages.
Test with a combination of barcodes that would invoke these messages, for example:
- impossible: barcode doesn't exist
- impossible: barcode is for a 'notforloan' item type
- impossible: debt
- needs confirmation: barcode already checked out, i.e. confirm renewal
Include barcodes that should have successful checkouts too.
Also, test with the following sysprefs:
- BatchCheckouts: enabled
- BatchCheckoutsValidCategories: none selected
Confirm SCO does not have a multi-line text area for more than one barcode, and doesn't accept more than one barcode.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch encourages the user to check out certain items individually if they fail to be checked out in a batch.
This way they will be presented with more useful error messages.
To test:
1 - Enable BatchCheckouts, select nothing in BatchCheckoutsValidCategories
2 - Find three barcodes
3 - log into SCO with a user in category Patron, paste the barcodes separated by newlines and submit. confirm one item is succcessfully checked out and the other two barcodes are listed in the pop-up, encouraged to try checking out individually.
4 - select Patron in BatchCheckoutsValidCategories
5 - log into SCO with your Patron user again, confirm you can check out multiple items at a time
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch ensures we check the categorycode of the patron trying to issue the items is valid (based on BatchCheckoutsValidCategories), rather than the categorycode of the AutoSelfCheckAllowed patron.
To test:
1 - Enable BatchCheckouts, select nothing in BatchCheckoutsValidCategories
2 - confirm AutoSelfCheckAllowed is allowed and contains the username and password for the self_check user. Confirm self_check user is in category Staff
3 - log into SCO with a user in category Patron, confirm you can only check out 1 item at a time
4 - select Patron in BatchCheckoutsValidCategories
5 - log into SCO with your Patron user again, confirm you can check out multiple items at a time
Sponsored-by: Koha-US
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Not yet handling renewals, returns, or items that are impossible to check out.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch allows more than one item to be scanned and processed at once in Koha's self-checkout module. The items in the batch will still be handled one-by-one, so if any item in the batch requires confirmation (i.e. to be renewed or returned) or is impossible to check out, the process will stop at that item. Any items earlier in the list will be processed, but any items coming after in the list will be ignored. This feature uses the existing BatchCheckouts and BatchCheckoutsValidCategories system preferences to determine if batch checkouts should be allowed.
To test:
1) Open the staff interface. Go to Koha Administration -> Global system preferences. Search for "BatchCheckouts". Confirm BatchCheckouts syspref is disabled, and no categories are selected for the BatchCheckoutsValidCategories syspref.
2) In another tab, open the OPAC self checkout (found out OPACBaseURL/cgi-bin/koha/sco/sco-main.pl) and log in
3) Confirm the self-checkout works as normal for checking out, returning or renewing one item at a time
4) Go back to the staff interface tab (you may need to log back in). Enable the BatchCheckouts syspref but leave the BatchCheckoutsValidCategories syspref empty.
5) Refresh the OPAC self checkout tab. The barcode input field will now be bigger to support a list of barcodes. Enter a list of barcodes separated by newlines and Submit.
6) Only the first barcode should be processed. This is because no categories are valid for BatchCheckouts.
7) Go back to the staff interface tab (you may need to log back in). Select at least your patron category for the BatchCheckoutsValidCategories syspref and Save.
8) Refresh the OPAC self checkout tab. Enter a list of barcodes separated by newlines and Submit. Confirm all valid items are checked out as expected.
9) Test with a few items that are notforloan or would not be valid checkouts. Confirm they are not checked out, but other valid items in the batch are checked out successfully.
10) Test with a batch where one of the items is already checked out to the patron. The batch should get blocked at this item as the self-checkout asks for confirmation.
11) Test with both renewing and returning of items that are already checked out to the patron. This will only work with one item at a time and later items in the list will be ignored.
Sponsored-by: Koha-US
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The tab has been renamed at some point and I think the link should
be adapted to be clear where it leads to.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the patron restrictions markup and splits up some
strings to (hopefully) improve the translation process. The patch also
fixes a bug in a previous patch which prevented manual restrictions from
being displayed if there was also a restriction added by
overdue_notices.pl.
Test that all three kinds of restrictions display correctly:
- Restrictions added by overdue process
- Manual restriction without an expiration date
- Manual restriction with an expiration date
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Added more info to the restrictions message
in circulation as well as to the OPAC display
in "Your account" and to the display of
restriction messages when trying to place a
hold in the OPAC.
To Test:
1. Before applying patch, set system preference
"PatronRestrictionTypes" to "Allow"
2. Go to Administration -> Patron restriction types
3. Add some restriction types, make sure you
fill out both "Code" and "Label"
4. Go to any patron and add one or more of each
restriction type
4a. Make sure that you add some with an
expiration date and some without
4b. Make sure you add some with a comment and
some without
5. Go to that patron's checkout page
6. Notice that only the comments of the
restrictions are displayed and not all info
is displayed
7. Apply the patch
8. Reload the page
9. Notice the restriction types are now
displayed correctly
10. Notice the colon is only displayed
if there is a comment
11. Notice the expiration date is also displayed
12. Open the OPAC and log in with that user
(or if you want to log in with your own user:
make sure they have all the restrictions
mentioned above as well)
13. Go to "Your account" in the OPAC
14. Notice the display of restrictions
15. Try to place a hold on any record
16. Notice the display of restrictions
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch changes the display of patron
restrictions in checkout and patron details
pages to show the restriction type for each
restriction. It also changes the display so
each restriction is shown on a newline.
To test:
1. Before applying patch, set system preference
"PatronRestrictionTypes" to "Allow"
2. Go to Administration -> Patron restriction types
3. Add some restriction types, make sure you
fill out both "Code" and "Label"
4. Go to any patron and add one or more of each
restriction type
5. Go to that patron's checkout page
6. Notice that only the comments of the
restrictions are displayed
7. Apply the patch
8. Reload the page
9. Notice the restriction types are now
displayed correctly
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Place a hold on any bib record
2. Cancel the hold by clicking the trash can icon next to it
--> Note that there is an empty red page section in the modal
3. Apply patch and refresh the page
4. Repeat steps 1-2
--> No empty red page section
5. Confirm that the test plan from bug 33174 still works
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When report results number exceeds the result per page limit, batch
operations link reads "Batch operations with (page limit) records" even
if there are more or less shown records (more when using limit in SQL or
less in the last page of result). This patch fixes the link text to
actual shown records.
To test:
1) Create a report of items with a limit of e.g., 26.
2) Run report.
3) See that number of results shown exceeds 20 but the link says "Batch
operations with 20 visible records".
4) See that the second page shows 6 results but the link is still for 20
records.
5) Apply patch.
6) Run report again.
7) See that the link texts will show correctly 26 records on the first
page and 6 records on the second.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch re-syncs the two catalog concerns display tables markup. We
add the 'Title' field into the catalog/detail version of the table and
split the columns settings so you can control the table distinctly from
the cataloguing module version so we can hide 'title' by default in the
details display tab.
This results in the table matching the display from the cataloguing
module page, i.e. the assignee and status detail displays.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Have some itemtypes.notforloan values set to NULL.
2. APPLY PACTH, updatedatabase, restart_all
3. When you updatedatabase those values should be set to 0.
4. Try updating an itemtypes.notforloan value to NULL. You cannot.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Suspending a hold doesn't clear the date from the date picker. When another hold is suspended
the previously used date will show on the date picker but the value is not set on the hold.
Suspending the hold will suspend it indefinitely. Also the link "Clear date to suspend indefinitely"
will not clear the date picker. This patch will make both the Suspend button and the Clear date link
clear the dates from both the date picker and the variable passed on, making the suspending consistent
with what is seen on the date picker.
Test plan:
1) Place 3 holds on a patron.
2) Suspend a hold and set a date for it.
3) Suspend a second hold and notice the previously used date is shown on the date picker.
Note that the hold will be suspended indefinitely.
4) Open the suspending window for the third hold and pick a date. Click "Clear date to suspend indefinitely"
and note the date picker doesn't get cleared. The hold will be suspended indefinitely.
5) Apply patch.
6) Suspend a hold and set a date for it.
7) Suspend a second hold and notice the date picker does not have a preset date.
8) Pick a date and clear it with the "Clear date to suspend indefinitely link".
See that the date picker also gets cleared.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
