The prefs language and opaclanguages used the comma to separate the
different values.
The new prefs OpacAdvSearchMoreOptions and OpacAdvSearchOptions should
do the same.
To reproduce the issue: update the language pref (or opaclanguages) and
refresh the page.
=> The pref values are not checked anymore and the language selection
(bottom of the page) does not appear.
Test plan:
1/ Verify that the behavior described above is fixed.
2/ Verify that the original test plan of bug 9043 still passes.
Note: The 2 OpacAdvSearchMoreOptions and OpacAdvSearchOptions pref
values are overwritten but the feature have just been pushed recently.
It should not affect a production environment.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I was able to reproduce the issue and verify that this patch corrected
the problem. Langage selection and OpacAdvSearchOptions worked
correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to sync patron data between Koha and the
Norwegian national patron database, in both directions.
In order to use this, the following information is necessary:
- a username/password from the Norwegian national database of libraries
("Base Bibliotek"), available to all Norwegian libraries
- a special key in order to decrypt and encrypt PIN-codes/passwords,
which is only available to Norwegian library system vendors
- a norwegian library vendor username/password
See http://www.lanekortet.no/ for more information (in Norwegian).
While this is of course an implementation of a specific synchronization scheme
for borrower data, attempts have been made to prepare the ground for other sync
schemes that might be implemented later. Especially the structure of the new
borrower_sync table might be reviewed with an eye to how it might fit other
schemes.
To test:
Since the password and cryptographic key needed to use this functionality
is only available to Norwegian library system vendors, only regression testing
can be done on the submitted code. Suggested things to check:
- Apply the patch and make sure the database update is done. This should add
the new "borrower_sync" table and five new systmpreferences under the
"Patrons" > "Norwegian patron database" category:
- NorwegianPatronDBEnable
- NorwegianPatronDBEndpoint
- NorwegianPatronDBUsername
- NorwegianPatronDBPassword
- NorwegianPatronDBSearchNLAfterLocalHit
- Check that patrons can be created, edited and deleted as usual, when
NorwegianPatronDBEnable is set to "Disable"
- Check that the new tests in t/NorwegianPatronDB.pm run ok, e.g. on a
gitified setup:
$ sudo koha-shell -c "PERL5LIB=/path/to/kohaclone prove -v t/NorwegianPatronDB.t" instancename
- Check that all the other tests still run ok
- Check that the POD in the new files itroduced by this patch looks ok:
- Koha/NorwegianPatronDB.pm
- members/nl-search.pl
- misc/cronjobs/nl-sync-from-koha.pl
- misc/cronjobs/nl-sync-to-koha.pl
- t/NorwegianPatronDB.t
Sponsored-by: Oslo Public Library
Update 2014-09-18:
- Rebase on master
- Split out changes to Koha::Schema
- Incorporate new way of authenticating with NL
Update 2014-10-21:
- Rebase on master
- Use Module::Load to load Koha::NorwegianPatronDB in non-NL-specific
scripts and modules
- Fix the version number of Digest::SHA
- Fix a missing semicolon in kohastructure.sql
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The current holds behavior in Koha allows a situation like this:
- Patron A has an item currently checked out.
- Patron B places a hold on the next available copy of that title.
- Then Patron A will not be able to renew his item, even if there are
other available copies of that title that could potentially fill Patron
B's hold.
Since this seems unfair to Patron A, we should allow renewal of items
even if there are unfilled holds, but those holds could all be filled
with currently available items.
Test Plan:
1) Apply this patch
2) Create a record with two items
3) Check out the item to a patron
4) Place a hold on the record
5) Note you cannot renew the item for the patron
6) Enable the new system preference AllowRenewalIfOtherItemsAvailable
7) Note you can now renew the item, as all the holds can be satisfied
by available items.
8) Place a second hold on the record
9) Note you can no longer renew the item, as all the holds *cannot*
be filled by currently available items
Signed-off-by: Holger Meissner <h.meissner.82@web.de>
Signed-off-by: Chris Rohde <crohde@roseville.ca.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This bug adds a new preference, "SubfieldsToAllowForRestrictedEdition,"
but the use of the term "Edition" in this context is incorrect. I think
it would be more clear to change the preference name to
"SubfieldsToAllowForRestrictedEditing." This patch makes this change.
I realize this isn't a big issue since the preference has a good
description, but I thought that if we were going to make this as clear
as possible now would be the time to do it.
To test, start with a database which hasn't previously been used to test
Bug 7673. Apply all patches and run the database update. Follow the test
plan as described in the bug.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, change appears complete.
All tests and QA script still pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Also fix a typo in the permission description
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patches pass QA script and tests.
Copying the test plan from the bug report:
Test plan:
1/ add the following permissions to the logged in patron:
edit_item, edit_items_restricted, delete_all_items,
items_batchmod, items_batchmod_restricted
2/ Fill the prefs SubfieldsToAllowForRestrictedEdition
and SubfieldsToAllowForRestrictedBatchmod with some
subfield (for instance "995$f 995$o" and "995$o")
3/ Verify you are allowed to edit the item fields defined
in the pref SubfieldsToAllowForRestrictedEdition.
4/ Try to edit item in a batch and verify you are allowed
to edit the item fields defined in the pref
SubfieldsToAllowForRestrictedBatchmod.
5/ Try to delete all items of a record
Play with the pref/permissions and verify they are
correctly taken into account.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
3 permissions:
- edit_items_restricted
- delete_all_items
- items_batchmod_restricted
2 system preferences:
- SubfieldsToAllowForRestrictedEdition
- SubfieldsToAllowForRestrictedBatchmod.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds 2 new sysprefs: OpacAdvSearchOptions and
OpacAdvSearchMoreOptions.
These sysprefs are multivalued and you can add or remove some elements on
the adv search page.
This patch allows to display/hide some entries in the advanced search
page at the OPAC.
On this way, it is possible to configure the search options to display.
Test plan:
1/
Fill OpacAdvSearchOptions with Item types and Languages.
Fill OpacAdvSearchMoreOptions with Item types, Languages and Location.
On the advanced search page, verify the Location is only displayed for
the "More options" view.
2/ Try different settings for these prefs
3/ Remove all entries for the OpacAdvSearchMoreOptions and verify that
the "More options" does not displayed additional options.
4/ Remove all entries for the OpacAdvSearchOptions and verify that the
"normal view" does not displayed any options.
Note that this patch only affects the bootstrap theme.
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test scenario:
1. Apply the patch
2. Run updatedatabase.pl
3. Login to Koha and go to Adminstration.
4. Click on Global system preferences.
5. Search GoogleIndicTransliteration and choose value "Show".
6. Apply patches on bug 13144
7. Go to OPAC and see GoogleIndicTransliteration coming on Masthead.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fixes the description and bug reference.
http://bugs.koha-community.org/show_bug.cgi?id=12466
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes the description on the old update database entry,
no problems found.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For using z3950 BNF server with utf8 encoding, one must use "TOUT-UF8" base.
See http://www.bnf.fr/fr/professionnels/recuperation_donnees_bnf_boite_outils/a.profil_z3950_bnf.html
Test plan :
- create a fresh koha install : UNIMARC and fr-FR with optional z3950 servers
- go to cataloguing
- click on "New from Z39.50/SRU"
- Perform searches on BNF2
=> Check that encoding is correct
- Choose a record and import
=> Check that encoding is correct
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Trivial database field change, that reflects BnF recommended settings.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All instances have been changed. No problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes several changes to language and markup with one
change in behavior:
- Updated permission description to avoid the use of the term "biblio"
- Updated batch delete template to avoid the use of the term
"biblio" and to improve clarity.
- Replaced instances of terms "issue" and "reserve" with "checkout" and
"hold" respectively.
- On bibliographic record batch delete, wrap biblionumber in <label>.
- On bibliographic record batch delete, show subtitle via Keywords to
MARC mapping.
- On bibliographic record batch delete, respect BiblioDefaultView system
preference.
- In the staff client cart, move batch delete link from "Action" menu
to text link below (alongside "add to list" and "place hold"). The
buttons are actions which affect the whole Cart. The links are actions
which can be applied to selected items. I think this change makes it
more consistent with the kind of operation being performed.
To test:
- Submit a batch of bibliographic records and confirm that the
list of titles shows subtitle data as defined in Keywords to MARC
mapping. Confirm also that the title links respect your
BiblioDefaultView system preference.
- Perform a catalog search, select several titles, and add them to the
Cart. Open the Cart and test the "Batch delete" link with and without
titles selected. Test as a user who lacks batch biblio delete
permission and confirm that the link does not appear.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
I love the rewording, we always translated 'biblio' as 'bibliographic record',
it makes a lot of sense.
Tested using direct input of biblionumber or cart, subtitle display shows
correctly, link respect preference, user without permission cant acces the
tool or links.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Fixes the permission on the tools page
- Fixes some capitalization
- Changes 'Reserves' to 'Holds'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds/updates languages, scripts and regions to
reflect what we currently have on translation server.
Languages, scripts and regions are ordered by respective code
To test:
1. Apply the patch
2. run updatedatabase.pl, must run without errors
3. Go to advanced search (opac/staff), more options, and check
language pulldown (verify you have an empty AdvancedSearchLanguages
syspref)
4. Remove contents from language_descriptions, language_rfc4646_to_iso639,
language_script_bidi, language_script_mappin and language_subtag_registry
5. Load installer/data/mysql/mandatory/subtag_registry.sql,
must load without errors
6. Repeat 3
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Tested the SQL, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sponsored-by: Ville de Victoriaville, QC
Confirmation box contents:
"Please confirm checkout"
"-Rental charge for this item: n"
[Yes, check out (Y)] [No, Don't Check Out (N)]
Test case A: Confirm checkout
1) Go to checkout user "X"'s checkout page.
2) Enter barcode for an item with rental fees.
3) Click the "Check out" button.
4) Confirmation box appears.
5) Click on the "Yes" button.
6) Item is added to checkout list.
7) Fees are added to the patron's account.
Test case B: Decline checkout
1) Go to checkout user "X"'s checkout page.
2) Enter barcode for an item with rental fees.
3) Click the "Check out" button.
4) Confirmation box appears.
5) Click the "No" button.
6) Checkout page goes back to its initial state.
7) Patron has no item checked out and no fees to pay.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
With the system preference RentalFeesCheckoutConfirmation
set to "don't ask" there is no change in behaviour.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Trusting the sign off on the other page, I only tested the QA changes
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Test Plan:
In "Tools" -> "Rotating Collections" -> "Add/Remove items":
When adding item barcodes to the collection, the input field
<input type="text" id="barcode" name="barcode">
should become active
automatically so it is easy to add multiple barcodes rapidly without touching the
mouse or keyboard.
Enter-press is dealt by the barcode reader so automatic form submittal should be handled
by the barcode reader.
In "Rotating collections" -> "Transfer Collection":
When the collection is initially transferred, items are set to trasfer correctly.
When the collection is transferred while items are still being transferred, the transfer
destination library doesn't change from the original one.
The holding library changes for all items in the collection to the destination library on
retransfers as well.
This is tricky if a user accidentally places the wrong destination.
When I try to checkin these items to their new retransfer location, I get the following messages:
-"This item is part of a rotating collection and needs to be transferred to <original transfer destination>"
-"Please return Valkoinen ihmissyj / to <original transfer destination>"
-"Print slip or Cancel transfer"
When I checkin a Item to a arbitrary branch, I get the following messages:
"This item is part of a rotating collection and needs to be transferred to <retransfer destination>"
"Please return Valkoinen ihmissyj / to <original trasfer destination>"
Bug 8836 - Resurrect Rotating Collections - QA Followup
Bug 8836 - Resurrect Rotating Collections - Followup 2 - Perltidy rotating collections scripts
Bug 8836 - Resurrect Rotating Collections - Followup 3
* Fix bad TT Tag
* Fix bad sql query
* Fix capitalization ( HTML4 )
* Allow a rotating collection's location to keep AutomaticItemReturn
from sending it back to the branch of origin
* Fix bad query
Bug 8836 - Resurrect Rotating Collections - Followup 4 - Autofocus on barcode field
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Don't transfer issued and waiting items
Items in a rotating collection are automatcially transferred when a
collection is transferred. This is a problem for currently checked out
items and items on hold marked as "Waiting".
This patch resolves this issue by skipping the transfer for those items.
When the items are then returned, the librarian will be alerted to
transfer the item to the library currently holding that rotating
collection.
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Link collections.colBranchcode to branches.branchcode
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
http://bugs.koha-community.org/show_bug.cgi?id=8835
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Item search is available at catalogue/itemsearch.pl (link is in
catalogue/search.pl)
It only uses SQL (not Zebra)
* Use DataTables and server-side processing to be able to filter on
individual columns after the first search is done.
* Allow to export results in CSV
* With Javascript disabled, search form still works (and CSV export too)
There is the possibility to define "Custom search fields" in a new admin
page admin/items_search_fields.pl (link is in admin/admin-home.pl)
A custom item search field is defined by:
* a name: its unique identifier
* a label: the text displayed to the user
* a MARC field/subfield: the field/subfield to query (it uses
ExtractValue)
* an authorised values list (optional): if defined the list is displayed
in the search form
New Perl dependency: Template::Plugin::JSON::Escape
Test plan:
1/ Apply the patch and run updatedatabase.pl
2/ Go to advanced search (staff interface), then click on "Go to item
search"
3/ Play with the search form! :)
In the 3rd fieldset you can add as many fields as you want and combine them with
boolean operators (AND, OR). You can use SQL jokers characters (%, _)
You can output to screen (in a DataTables table) or to a CSV file.
4/ In the DataTables table, play with filters and try sorting columns.
5/ Disable Javascript (with Firefox: extensions NoScript or YesScript,
or in about:config 'javascript.enabled' = false
6/ Reload the search page and do some searches on screen output. (there
is no sorting or filtering features, but there is still pagination)
7/ Try again CSV output.
8/ You can re-enable Javascript.
9/ Go to Administration > Items search fields
10/ Add a new field. Example for title (in UNIMARC):
Name: title
Label: Title
MARC field: 200
MARC subfield: a
Authorised values category: None
(add another field with an authorised values category to see the
difference).
11/ As you are there try to update and delete some fields.
12/ Go back to items search form. You can see in the 3rd fieldset that
your fields have appeared in the selects.
13/ Try searching on them.
14/ I think you're done :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. Good new option.
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This feature will allow libraries to specify that, when an item is returned,
a local hold may be given priority for fulfillment even though it is
of lower priority in the list of unfilled holds.
This feature has three settings:
* LocalHoldsPriority, which enables the feature
* LocalHoldsPriorityPatronControl, which selects for either tha patron's
home library, or the patron's pickup library for the hold
* LocalHoldsPriorityItemControl, which selects for either the item's
holding library, or home library.
So, this feature can "give priority for filling holds to
patrons whose (home library|pickup library) matches the item's
(home library|holding library)"
Test Plan:
1) Apply this patch
2) Run t/db_dependent/Holds/LocalHoldsPriority.t
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements the In-House Use feature for Koha.
It adds:
- 2 new sysprefs:
'In-House Use' to enable/disable this feature
'In-House Use Forced' to enable/disable the feature for *all* users.
- 2 new columns issues.inhouse_use and old_issues.inhouse_use
- Datatable on the circulation history pages (readingrec) at the OPAC
and the intranet.
A new checkbox in the Circulation tab. If checked, the issue become a
in-house use (in the statistics and issues tables).
When you check it, the due date changes to the today date.
The syspref "In-House Use Force" allows to force the in-house use to
permit the checkout even if the borrower is debarred or others problems.
In the issue table, a new string (in red) marks the issue as "in-house use".
The circulation history contains 3 tabs : "all", "checkout" and
"in-house use" (OPAC and intranet).
The cronjob script:
If AutomaticItemReturn if off, a library would like not to do a transit
operation manually. This script (to launch each night) do returns
for a specific branches.
Test plan:
1/ Execute the updatedatabase entry
2/ Enable the 'In-House Use' pref.
3/ Checkout a biblio for a patron and check the 'in-house use' checkbox.
4/ Check that the due date is the today date (with 23:59) and is not modifiable.
5/ Click on the check out button and check that the new check out
appears in the table bellow with the "(In-house use)" string.
6/ Go on the circulation history pages (readingrec and opac-readingrec)
and try the 3 tabs. In the last one, your last checkout should appear.
7/ Check in.
8/ Check readingrec pages.
9/ Choose a debarred patron and check that you cannot checkout a biblio
for him.
10/ Switch on the 'In-House Use Forced' pref
11/ You are now allowed to checkout a biblio for the debarred patron.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Remove tab characters in acqui/addorder.pl
* Remove FIXME in acqui/cancelorder.pl
* Fix typos: "canceled" -> "cancelled", "occured" -> "occurred"
* Replace "Click here" link by "OK"
* Add a column to aqorders to store cancellation reason instead of
having it in aqorders.notes, to avoid having untranslatable strings in
database
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With the OPAC prog template going away, the only remaining use of the
yuipath preference is on the basketgroups template. The yuipath
preference should be removed and the local path hard-coded.
This patch:
- removes yuipath handling from C4/Templates.pm
- removes the preference from sysprefs.sql
- deletes the preference via updatedatabase.pl
- removes the preference from the staff client preferences file
- removes unused references to the YUI assets from the help file
header include
- adds the local YUI asset path to acqui/basketgroup.tt
To test, apply the patch and run the database update. View some online
help pages and confirm that they function correctly. View the
basketgroups page (Acquisition -> Vendor -> Basket groups), edit a
basket group, and confirm that basket drag and drop operations work
correctly.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Online help and basket group drag&drop functionality still work correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes hardcoded 'prog' from themelanguage on C4/Templates.pm
It adds a new syspref OPACFallback to hold the prefferred fallback
theme for new themes with minimal changes.
This does not brake CCSR if new syspref value is 'prog',
using 'bootstrap' works somehow, but with strange results.
To test:
1) Apply the patch
2) Run updatedatbase.pl
3) CCSR, prog & bootstrap must work as usual
4) Need to test theme/language fallback
a) translate for your preferred language (xx-YY)
b) enable language on opac
c) go to opac, select that language
d) login on opac, go to personal details
e) remove koha-tmpl/opac-tmpl/bootstrap/xx-YY/modules/opac-memberentry.tt
d) reload page, must load in English
f) click other member options, must load on translated language
(can use other pages, ccsr, prog or bootstrap)
5) Do a similar test but for a staff page, enable lang, switch to it,
rm koha-tmpl/intranet-tmpl/prog/xx-YY/modules/admin/admin-home.tt,
any page must be translated except for admin home.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
With CCSR now deprecated there is no longer a need for the
OPACMobileUserCSS system preference. This patch removes it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
With CCSR having been deprecated there is no longer a use for the
OpacMainUserBlockMobile system preference. This patch removes it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
