Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch avoids escaping HMTL data in the additional fields section.
To test:
1. Open the additional fields section
http://kohadev-intra.mydnsname.org:8081/cgi-bin/koha/admin/additional-fields.pl
=> FAIL: there are some nasty <span> </span> texts in there
2. Apply this patch
3. Reload
=> SUCCESS: Things display nicely again!
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch enables use of DataTables' built-in session storage of table
configurations. DataTables by default uses the browser's localstorage
feature to store the state of each DataTable, including which columns
have been hidden by the user.
Our table settings system has always overridden this saved state. This
patch adds a check for a saved configuration state and if present loads
the saved state instead of the default state.
The system is enabled in this patch on the libraries administration
page. To test, apply the patch and open go to Administration ->
Libraries.
- Use the "Columns" button to change the visibility setting of multiple
columns.
- Navigate away from the page and then back to test that the visibility
settings have been kept.
- Go to Administration -> Table settings -> Administration and change
the visibility settings for the "libraries" table in a way that it
differs from the visibility settings you set manually.
- Return to the libraries administration page and confirm that your
manual settings are still being loaded instead of the defaults from
table settings.
Signed-off-by: Solène Desvaux <solene.desvaux@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To allow additional styling the class template_toolkit_error was
added to the list element.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It would be useful for Koha to run a basic TT validation test and report back errors.
That way if somebody misses an END tag or something of that nature, it will be easy to find and fix.
Test Plan:
1) Apply this patch
2) Edit a notice, change the content to simply "[% END %]"
or some other invalid Template Toolkit
3) Choose "Save and continue editing"
4) Note the new "Template Toolkit error" field that displays the error
message
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fix bad conflict resolution with bug 29648.
Test plan:
Confirm that the "Columns" button is displayed on the patron result view
and that it works as expected.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a note in the description of FacetLabelTruncationLength
that it only works with Zebra.
To test:
0) Apply patch
1) Go to Administration > Global system preference > Searching
preferences
2) Search for FacetLabelTruncationLength
3) Read the description, make sure it indicates that is requires Zebra
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the subscription entry form so that the values of
two system preferences are displayed as a hint to the user:
The "Number of issues to display to staff" field will show the value
of the StaffSerialIssueDisplayCount preference, and the "Number of
issues to display to the public" field will show
OPACSerialIssueDisplayCount. If the user has permission the system
preference names will link to the system preferences page.
To test, apply the patch and log into the staff interface as a user with
permission to edit system preferences.
- Go to Serials -> New subscription.
- The "Number of issues to display to staff" field should have a hint
under it: "Default: XX (StaffSerialIssueDisplayCount system
preference)"
- The "Number of issues to display to the public" field should have a
hint under it: "Default: XX (OPACSerialIssueDisplayCount system
preference)"
- Log out and log back in as a user who does not have permission to edit
system preferences. Return to the form and confirm that the hints do
not link to system preferences.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When canceling holds waiting over X days in "Holds awaiting pickup"
view, form submission resets the selected tab to "Holds waiting". This
tab reset may cause confusion for the user and lead to unwanted
actions. Instead, the user should be returned to the same tab that they
began with.
To test:
1. Apply patch
2. Navigate to /cgi-bin/koha/circ/waitingreserves.pl
3. Select "Holds waiting over X days" tab
4. Refresh page
5. Observe "Holds waiting over X days" is still selected
6. Have some holds waiting over X days
7. Select one of them and press "Cancel selected (1)" and confirm
8. Observe "Holds waiting over X days" is still selected after form
submission
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new system preference to allow systems librarians the
option to pick wich address to use for overdues notices.
We default to 'cron' to allow existing uses of '--frombranch' on the
command line to continue to function but now allow end users to override
this option via the new OverdueNoticeFrom preference.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Look up pref OPACSearchForTitleIn.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch
2. Go to Catalog > Item search and do a search for items that you know contain a items.enumchron
3. The result set should now show the items.enumchron
4. Make sure you can properly "Export results to.."
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch
2. Do a search and select some records
3. On the toolbar (#selection_ops) open the Edit dropdown.
4. The labels should read 'Batch edit records' and 'Batch delete records'.
Note: To see both you must have batchmod and batchdelete permission.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Apply patch
2 - Repeat test on previous patch
3 - You should get a warning popup when attempting to save hold
4 - Reload page
5 - Inspect the HTML and manualy set #pickup value of selected option to ""
6 - Attempt to save hold
7 - You get the popup
8 - Place a hold normally (with location) and verify it works
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
DataTables is not raising error to the end user, it's only displaying a generic message in the console.
This leads to lot of questions on IRC or the mailing list ("the table is empty").
We can do better and display what went wrong.
We could also imagine add a link to the wiki for the more common problems (won't be implemented here however).
Test plan:
Revert "Bug 31104: Put each link on a separate header" and search for a
patron using a very long string
You should get an alert with the reponse of the server.
In my case:
"""
Something went wrong when loading the table.
414: Request-URI Too Long
"""
You can also make the REST API returns a 500 (bad specs or simply with a
die statement).
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As talked with Martin, this patches were originally developed before we
added the modals/ and str/ dirs, but we need to align it with current
way of doing it. This patch does that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the renewals modal to correctly format the staff
member who renewed the checkout.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Quieting an issue highlighted by the QA tool.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the display of the renewals modal when appropriate. A
"View" link is displayed next to renewals count where appropriate.
Clicking the link opens the modal that displays the logged renewals.
Sponsored-by: Loughborough University
Signed-off-by: Myka Kennedy Stephens <mkstephens@lancasterseminary.edu>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Ben Veasey <B.T.Veasey@lboro.ac.uk>
Rescued-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
I rescued this patchset by squashing previous work and updating it to
utilise the new renewals API routes introduced in bug 30275.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Browse to 'Administration->Circulation and fines rules'
2 - Make sure you are editing 'Standard rules for all libraries'
3 - Set 'Lost item fee refund on return policy' to 'Refund lost item charge and charge new overdue fine'
4 - Swtich to edit rules for a specific library, click on the dropdown for 'Lost item fee refund on return policy' and note default says 'Use default (Refund lost item charge and restore overdue fine)'
5 - Switch default/all libraries rule to 'Refund lost item charge and restore overdue fine'
6 - On specific branch note the default option is now 'Use default (Refund lost item charge and charge new overdue fine)'
7 - Apply patch and repeat, note the default descriptions now display correctly
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is a flaw when subfields are ordered, the inputs are not retrieved
correctly.
We should not rely on the order but use an id instead.
Test plan:
Create, edit subfields
Modify values from the different subfields
Confirm that values are correctly saved
Signed-off-by: Thibault Kero <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Make sure you have mandatory item subfields in the MARC bibliographic
framework used in acquisitions ("ACQ" if it exists, the default framework
otherwise).
2. Use the "Stage MARC records for import" tool to upload a file. Do not import
the bibliographic records.
3. Create a new acquisition basket ("Create items when:" must be set to
"placing an order") and add a new order from a staged file
4. Select the file you just uploaded
5. In the "Items information" tab, make sure at least one mandatory subfield is
empty
6. Try to submit the form. If there are errors about other mandatory fields
(like the fund for instance), fix those errors and resubmit. There should be
an error message about mandatory item subfields.
7. Enter a value for the mandatory item subfields and resubmit the form. Verify
that the order and the item have been correctly created.
Signed-off-by: Thibault Kero <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the "views" group of links (MARC, Card, and Order) into
a menu button. The patch also makes some corrections to the modal markup
and handling to fix a display error.
To test you must have a basket or baskets with multiple titles on order,
both received and pending.
- Apply the patch and go to Acquisitions -> Vendor -> Receive shipment
-> Receive a new shipment (or open an existing invoice).
- In the list of pending orders:
- Test the 'View' menu for multiple titles. The 'Order,' 'MARC,' and
'Card' menu items should work correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch switches to Bootstrap tabs anywhere in the OPAC where
jQueryUI tabs were used.
To test, apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Test the item type/collection/shelvinglocation tabs on the advanced
search page. Test that it works correctly with different variations of
the OpacAdvancedSearchTypes system preference.
- Search for an authority record and view the details. The "Notes"
tab should be styled correctly.
- Locate a bibliographic record and view the detail page. Verify
that tabs are working, including all the options:
- Holdings
- Other holdings ( If OpacSeparateHoldings is enabled)
- Descriptions ( MARC notes )
- Subscriptions
- Serial collection (UNIMARC, untested)
- Components ( If ShowComponentRecords is enabled. Link to sample
record:
https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=78023 )
- Comments
- Editions (OPACFRBRizeEditions)
- Html5media ( If HTML5MediaEnabled is on. Link to sample records:
(https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=10685)
- Images ( If OPACLocalCoverImages is enabled )
Bonus points for testing these tabs for which I don't have
credentials:
- Syndetics TOC
- Syndetics Excerpt
- Syndetics Reviews
- Syndetics AuthorNotes
- LibraryThing for Libraries (with LibraryThingForLibrariesTabbedView
set to "in tabs."
- NovelistSelect
- Check tabs on these patron-related pages:
- Checkout history
- Search history
- Patron summary. The following tabs are
✓ Checkouts
✓ Relatives' checkouts
✓ Overdues
✓ Fines
✓ Relatives' fines
✓ Holds
✓ Recalls
✓ Article requests
✓ Overdrive
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30570: (follow-up) Correct rebase errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As the issue might not have been published yet, but should have
been that seemed a better fit.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have a vendor setup
2. Go to serials and add a new serial w/ that vendor.
3. When creating a serial make this first issues sometime in the past.
4. Go to Claims, choose your vendor and load the table.
5. No published on column.
6. Apply patch
7. Try step 4 again and now you should see a published on column.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Prevent a blink
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the form for adding a new subscription so that the
collection and item type fields are shown only when the subscription is
configured to create an item when receiving.
To test, apply the patch and go to Serials -> New subscription.
- When the page first loads, the "Do not create an item record when
receiving this serial" radio button should be selected.
- Under the "Location" field there should be no item type or collection
field.
- Select the "Create an item when receiving this serial" radio button.
- The item type and collection fields should appear.
- Test that the values are correctly saved when you add or edit a
subscription.
- If you edit a subscription which had item type and collection defined,
and you switch to "Do not create an item..." the record should save with
empty values for those fields.
- Confirm that existing subscriptions open with the correct settings
applied: Only records with "Create an item..." checked should open
with the item type and collection fields displayed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 28373 added system preference PassItemMarcToXSLT is referenced is all XSLT system preferences.
But it only applies on results pages.
The only use in perl code is in C4::Search :
> $marcrecord->delete_fields( @fields ) unless C4::Context->preference('PassItemMarcToXSLT');
I've tested by adding in all XSLT files :
<strong>ITEMS <xsl:value-of select="count(marc:datafield[@tag=952])"/> </strong>
Number of items only appears in OPAC and staff interface results pages.
In fact only search pages get MARC record from search engine, in which items datas have been embedded for indexing.
In other pages MARC record does not embed items datas.
This patch adds "MARC21 952, UNIMARC 995" to be explicit we talk about
MARC datas not item tags build in XML recieved by XSLT.
Test plan :
1) Apply patch
2) Search for PassItemMarcToXSLT in system preferencies
3) Look at description of PassItemMarcToXSLT
4) Check PassItemMarcToXSLT only apprears in OPACXSLTResultsDisplay and XSLTResultsDisplay
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement adds a new input above the search results allowing one to search within the results. The search
box will take a query and add it as a limit to the previous search
These patches make a slight change to the search header, passing the dropdown selection as a parameter rather thandirectly.
Searching this way is functionally equivaled to adding 'AND' with the new term to original results.
To test:
1 - Apply patch
2 - Search on staff client wiht a term that returns results
3 - Note the new 'Search within results box'
4 - Add a search term
5 - Note new results and confirm they are as expected
6 - Enable IntranetCatalogSearchPulldown and confirm the dropdown works as expected
7 - Edit your search - the reinfements appear in the limits section and can be removed
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
View the pref on the System preferences, Patrons tab.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Share a list with a patron that has no email address.
Try to transfer ownership. Verify that you get the error message.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Check if the patron search still works on the intranet shelves form
when transferring ownership.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Pick or create a shared list. Login as owner.
Transfer to one of the other members.
Verify that you do no longer have Transfer, but see Remove share.
Login as the other member. Transfer it back.
Bonus: Working with two tabs, you can open the Transfer form and
in the meantime delete the list, the patron or remove the share.
Or change permissions. Submit after that and check the error message.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Pick or create a shared list.
Verify that OPAC only shows the Transfer button when you are the
owner of a shared list.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
[1] Valid transfer:
Log in with staff patron C having edit_public_lists.
Pick a public list. Choose Transfer. Select a patron.
Submit and check if transfer was successful.
[2] Permission problem:
Pick a staff user D. Temporary enable edit_public_lists.
Add another private tab. Login with D.
Pick a public list. Transfer. Choose another patron. Wait.
Switch tab: remove added permission from D.
Switch tab again: Submit transfer form. Error? Close tab.
[3] Bonus test - Shelf disappeared:
Pick a public list. Transfer. Choose another patron. Wait.
Open another tab. Delete the selected public list.
Close tab. Submit the transfer. Not exist error?
[4] Bonus test - Patron not found:
Pick a public list. Transfer. Choose another patron. Wait.
Open another tab. Delete selected patron.
Close tab. Submit transfer. Patron not found error?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note: Adjusting shelves_results template too for not allowing delete
when you do not have delete_public_lists (or higher). If you are the
owner, you are allowed to edit or delete. But transfer specifically
needs edit_public_lists (or higher).
Note: Removed a few useless POD lines to make qa tools happy.
Test plan:
Check if you see the transfer button on public lists only when having
permission edit_public_lists (or higher). And never on private lists.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a syspref 'ListOwnershipUponPatronDeletion' which
decides if all the owner's lists (public and private) are deleted
when the owner is deleted, or if the ownership of their public and
shared lists are transfered to the user who deleted the owner (private
lists that are not shared are always deleted).
To test:
1) Apply patch and update database
2) Set the ListOwnershipUponPatronDeletion syspref to 'Transfer...'
3) Set up a superlibrarian user
4) Log in as this superlibrarian user and set up three lists, a public
list (maybe named 'public'), and two private lists (named 'private' and
'shared')
5) Log in as this user to the opac (if you haven't already) and share
the 'shared' list with someone
6) View the virtualshelves table in mysql to see the three lists you
just created under your new user
7) Also view the virtualshelfshares table in mysql to see the 'shared'
list
8) Log into the staff client with your regular user (a different user to
the one you just created)
9) Search for the user you just created and delete them
10) Go to your lists
11) You should see the 'shared' list under your private lists, and their
'public' list under your public lists, both with you as the owner
12) if you view both the virtualshelves table and the virtualshelfshares
table in mysql again, youll see you are now the owner and the 'private'
list will no longer exist.
13) Set the ListOwnershipUponPatronDeletion syspref back to 'Delete...'
14) Repeat steps 3 - 10 again (it may help to delete the 'shared' and
'public' lists before you re-create them)
15) You should not see any of the lists you just made under private or
public lists this time. To confirm, check the virtualshelves table in
mysql and make sure that all three lists have been deleted.
Sponsored-by: Catalyst IT
Signed-off-by: Cédric Vita <cedric.vita@dracenie.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
2022-06-08 Removed old atomic update. See new follow-up.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement shows recalls ready for pick-up on the patron's account
so they can't be missed.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item. Note the pickup library.
5) Go back to the staff client. At the top right of the page, confirm
your logged in library matches the recall pickup library. Set the
library to the recall pickup library if needed.
6) Check in the recalled item and confirm the recall as waiting for
Patron A.
7) Go to Patron A's account (members/moremember.pl). Confirm the recall
shows under 'Recalls waiting here' and all the information is correct.
8) Go to Patron A's checkouts (circ/circulation.pl). Confirm the recall
shows under 'Recalls waiting here' and all the information is correct.
9) Click on the menu at the top right of the page and choose 'Set
library'. Change the library to some other library.
10) Repeat steps 7 and 8, however this time the recall should show under
'Recalls waiting at other libraries'.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The cashup history table was sorting from oldest to newest.. it's
perferable to show the most recent at the top by default.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On "About Koha" page are displayed the numbers of indexed biblios and authorities with ES.
It could be great if we could have comparison with the number of records in the database to display the number of missing records.
In the "System information" tab with the other "Data problems".
If Searchengine has any issue (index count will be -1), we do not
display missing records.
Test plan :
1) Use Elasticsearch searchengine
2) Rebuild all records : koha-elasticsearch --rebuild -d kohadev
3) Go to "About Koha" page and look at System information tab
=> you see no warning
4) On a biblio record delete the MARCXML in biblio_metadata.metadata
5) Rebuild all records : koha-elasticsearch --rebuild -d kohadev
6) Go to "About Koha" page and look at System information tab
=> you see warning : 1 record(s) missing on a total of 435 in indice koha_kohadev_biblios.
7) On a authority record delete the MARCXML in auth_header.marcxml
8) Rebuild all records : koha-elasticsearch --rebuild -d kohadev
9) Go to "About Koha" page and look at System information tab
=> you see warning : 1 record(s) missing on a total of 1705 in indice koha_kohadev_authorities.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
After placing an order in a basket with a discount of "0" if you attempt to modify we will load the vendor default discount, this can lead to accidentally applying a discount when modifying other order parts
To test:
0 - Have a vendor with a discount set
1 - Add an order to a basket
2 - While adding, set discount to 0
3 - Add order - prices are calculated ocrrectly
4 - Modify order
5 - Note discount is populated with vendor discount
6 - Cancel
7 - Apply patch
8 - Modify order
9 - Discount remains at 0
10 - Repeat with a vendor with no discount set
11 - Placing order not specifiying discount it remains blank
12 - Modifying order discount remains blank
13 - Modify order and set discount
14 - Confirm it is retained on modifcation
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds context to the term Print in the context of message transport types (as opposed to printing something/print button), for translation purposes.
To test:
0- Apply patch
Check the terms to be changed
1- Go to Tools > Notifications & slips
2- Edit a notification
** 3- In the tabs for different transport types, check the 'Print' term (letter.tt)
4- Go to Tools > Overdue notice/status triggers
** 5- In the transport types, check the 'Print' column heading (overduerules.tt)
Add a new language (fr-CA in the example, change for whatever language code you want)
6- In a terminal, run
gulp po:create --lang fr-CA
7- Then, run
gulp po:update --lang fr-CA
8- In system preferences, enable the new language in language and OpacLanguages
9- Switch the language in staff interface and OPAC
Change the translations
10- In your favourite text editor, open fr-CA-messages.po
11- Find the string msgctxt "Message transport type"
12- Enter a word in msgstr
13- Save the file
14- In a terminal, go to misc/translator
15- Run
./translate install fr-CA
Check the translations
16- Redo the steps to check the terms (steps 1-5) and make sure the terms in steps 3 and 5 are changed for the word you put in step 12.
17- Optionally, check the other pages where the term is supposed to be unchanged and make sure it is unchanged
Check the terms to leave unchanged (optional)
18- Enable the HoldsAutoFill and UseCashRegisters system preferences
19- Go to Administration > Cash registers and create a cash register
20- Go to a patron's account
** 21- Check the 'Print' button in the menu bar or the patron's account (members-toolbar.inc)
22- Go to the 'Accounting' tab
23- Create a manual invoice
** 24- In the 'Transactions' tab, check the 'Print' button in the fee line (boraccount.tt)
25- Pay the fee (make sure to use the cash register)
** 26- In the 'Transactions' tab, check the 'Print' button in the payment line (boraccount.tt)
27- At the top of the transactions table, click the 'Export' option
** 28- Check the 'Print' option (columns_settings.inc)
29- Go to the 'Check out' tab and check out an item
30- Go to the item's bibliographic record
** 31- Check the 'Print' button in the menu bar of the detailed record (cat-toolbar.inc)
32- Add the record to the cart and open the cart
** 33- Check the 'Print' button in the cart (basket.tt)
34- Place a hold on the item
35- In the search bar at the top, click the 'Check in' tab and check in the item
** 36- Check the 'Print' button in the 'Hold filled for' message (returns.tt)
37- Go to Tools > Cash summary for Branch
38- Click 'record cashup' and confirm
39- Click the 'Summary' link in the 'Last cashup' column
** 40- Check the 'Print' button in the cashup summary modal (cashup_summary.inc)
41- Go to Serials
42- Create a subscription (if there aren't any)
43- Receive an issue
44- From the subscription detail page, go to Create routing list
45- Add a recipient to the list
46- Save the routing list
47- Click 'Save and preview routing slip'
** 48- Check the 'Print' button in the routing list preview (routing_preview_slip.tt)
Note: I can't find where the 'Print' from tinymce_i18n.inc is displayed in the staff interface
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects a regression caused by Bug 28321, which
inadvertently removed the date due from output of item information in
each search result.
To test, apply the patch and perform a catalog search which will return
some results which are checked out and some which aren't. Confirm that
the checked out items show the date due correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch addresses the case of links that are generated on the XSLT
side, those linking to and from host records using 773$t and 773$a.
To test:
1. Pick a bibliographic record (I chose 'Unconditional' from the sample
data
2. Add " and ? to the title statement. I changed it to
'Uncond"itional?¿'
3. Add a child record to it
4. Open the detail page for the host record
=> FAIL: It doesn't show the 'Show analytics' link
5. Repeat 4 for the same record, in the OPAC
=> FAIL: It doesn't show the 'Show analytics' link
6. Apply this patch
7. Repeat 4 and 5.
=> SUCCESS: Links are shown!
8. Follow the links
=> SUCCESS: The links take you to the right resultset!
9. Go to the child record, and notice the link back to the parent works
:-D
10. Sign off :-D
Sponsored-by: Theke Solutions
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the use of templates and CGI in ExplodedTerms by using the
Koha::I18N library.
The functionality on the package is too simple, and messing with the
template paths complexity on the tests was too much, given we have a
nice way to have translatable strings at the package level.
This patch does that, and cleans up the test file as well, that required
complex template and CGI mocking to run properly.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/SuggestionEngine_ExplodedTerms.t
=> FAIL: It fails in master
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass
4. Follow the original test plan
=> SUCCESS: Things work
5. Enjoy the rest of the day and forget this ever happened
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When defining our sort fields in we defined all as 'numeric'
For other string containing numbers this is likely correct, however,
for callnumbers it is not. e.g. E45 should sort before E7
This patch adds a new 'callnumber' type and deifnes this for cn-sort and
adds to the field maping a sort without numeric set
To test:
0 - Be using ES with Koha
1 - On records with single item, add callnumbers:
VA65 E7 R63 1984
VA65 E7 T35 1990
VA65 E45 R67 1985
2 - Add public note 'shrimp' or something to make them easily searchable as a group
3 - Search for 'shrimp', sort by callnumber
4 - Note E45 comes last, it should come first
5 - Apply patch
6 - Reset ES mappings
7 - Reindex ES
8 - Repeat search
9 - Sorting should be correct when set to callnumber
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Michal Urban <michalurban177@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Turn on recalls
1.1) In Administration > Global system preferences, enable UseRecalls
1.2) Add recalls permissions in your circulation rules
2) In the OPAC, log in as a patron
3) Find a record with checked out items and place a recall
4) In the staff interface, go to the patron's account
5) Click on any tab on the left in the patron's account (e.g. Holds history)
--> Note that the Koha logo and search bar is at the top of the page between the module menu and the breadcrumbs
6) Click on the 'Recalls history' tab
--> Note that the Koha logo and search bar disappear
7) Apply patch
8) Conform search bar is there
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects the typo introduced in bug 28854 for part_name
handling in the js-biblio-format include. We also introduce proper
whitespace addition when concatenating subtitle, medium and parts to the
title string.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It was a IE fix apparently
commit f021b52e71
Bug 11703 [QA Followup] - Stop IE from caching ajax request
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the circ/ysearch.pl script used by the jQuery autocomplete widget.
We can now use the /api/v1/patrons endpoint to retrieve the patrons and
generate the patron result list.
Prior to this patch the different occurrences were defining the style
and the list of patron's attributes to display for each option (name,
date of birth, age, address, etc.). Now they are all displaying the same
information.
To acchieve this we had to:
* Make js-date-format.inc and js-patron-get-age.inc available from js_includes.inc
and so available from everywhere, which is certainly a good move. We
could discuss why this code is in include file instead of JS files
however.
* Remove the .ajaxSetup call in tags-review.js to reduce its scope: an
underscore parameter was added to the REST API query (?)
A better solution would have been to extend the existing widget
(https://learn.jquery.com/jquery-ui/widget-factory/extending-widgets/)
but I didn't manage to do it, and I feel like there is a bug in jQuery
autocomplete. The "source" was not taken into account.
We could think about replacing the jQuery autocomplete with something
else, but that's outside the scope of this bug.
Test plan:
Search for patrons and confirm the autocomplete works and that the
"select" action works as before (either a redirect or select the
patrons) on the different views:
* Place a hold
* Search for tags (form on the left)
* In the header, "Check out" and "Search patrons"
* Add instructors to course reserves
* View logs (the "librarian" input)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As suggested by Katrin, adding a warning to the system preference that
this has an effect on SIP configurations that needs to be understood.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
SIP00 is the code for CASH transactions that have taken place on a SIP
client. Cash management treats CASH type transactions as a special case
for banking and register requirements. This patch brings SIP00 in line
with the CASH handling code of cash management.
Test plan
1) Enable cash management with 'EnablePointOfSale'
2) Enable cash registers with 'UseCashRegisters'
3) Add a cash register via 'Administration > Cash registers'
4) Make some payments against the ash register in the staff client
5) Attempt to make a payment via a SIP client without having associated
a cash register to the SIP account config
5a) This should now fail
6) Attach the cash register to the SIP account used above
6a) Payment should now work again on SIP transactions
7) Look at the cash register details page for the cash register
7a) 'Bankale' should now include cash from both SIP and Staff client
sales
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
== test plan ==
1. Enable "Did you mean?":
. go to Administration > Additional parameters > Did you mean?
. put a tick in each plugin and save the configuration
2. In the OPAC, search for 'open source'
3. Without the patch you see escaped <span> after "Did you mean:"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Install another language and enable it in the OPACLanguages system preference
2) Also make sure opaclanguagesdisplay is set to Allow
3) Make sure OpacLangSelectorMode is set to display the switch in the footer (either top and bottom or footer only)
4) Turn on recalls
4.1) In Administration > Global system preferences, enable UseRecalls
4.2) Add recalls permissions in your circulation rules
5) In the OPAC, log in as a patron
6) Find a record with checked out items and place a recall
7) Go to your account
--> Note that the language switch is at the bottom left of the screen
8) Click on any tab in the patron's account
--> Note that the language switch is at the bottom left of the screen
9) Click on 'Your recalls history'
--> Note that the language switch is right under the recalls history table
10) Apply patch
11) The changelanguage div should now be properly placed at the bottom of the page.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch was split from bug 23681 where QA identified the issue.
This patch fixes the debarment count displayed on the circulation page
tabs
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the itemtype and collection code fields from the
bundle items table.
We will add the itemtype back in at a later date with a new bug as the
display code needs some careful consideration and we felt that doing
that work inline here would be an unrequired blocker.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds part number/name handling to the new biblio-format js
include. This will add such details to bundle management tables.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the 'In bundle: Link' to the OPAC to mirror what we have
on the staff client.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch restores a css rule that we lost during rebases that makes
the 'bundled' span that appears for bundled items on their respective
details pages so that the 'In bundle: ' text in the status field of the
table appears beneath the 'Not for loan (Added to bundle)' text.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds and removes the 'active' class to the 'Manage bundle'
button such that it correctly reflects whether the manage area is
expanded or not for the bundle item.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the item counts (Present|Lost) to the 'Manage bundle'
button in the catalogue details page.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We lost the date formatting somewhere along the line with rebases, this
patch restores the call to $date for last seen date.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch splits out the title formatting from the bundle item title
display into it's own new js-biblio-format include file and adds biblio
linking options.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch disables the add and remove options under bundle management
when the bundled item in question is checked out.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* aready > already
* 61 > 62
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Move the preferences into a section under 'Circulation' called 'Item
bundles'
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch wraps and unwraps strings appropriately for trasnlation.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Typo in code comment
* Permissions on atomicupdate
* Missing TT filter in template
* Spelling in template
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the count to only include table rows in the body, i.e.
skip the header row.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a further modal to the post checkin alert to allow the
user to print a view and print a list of items that went missing at this
checkin to allow for replacements to be picked.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the counterpart of the 'Add to bundle' modal prompt for
adding items to bundles from the catalogue details display. It allows
for scanning barcodes to remove them from a bundle.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the alternation of BundleLostValue to enable the return
claims functionality when Bundles are enbled.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the return claim details to the bundle item status
display on the catalogue details page.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement adds simple dataTable ordering to the verification
modal table at bundle checkin time.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We already allowed the user to view and print an updated content list
after a varification showed that items were missing from the bundle.
This patch adds the option to view and print the list even if the
content has been varified to have not changed.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch records the bundle issue from which an item is marked as lost
so that we may use that to infer who lost the item (for later charges
and display).
Test plan
0) Apply all patches up to this point
1) Checkout a bundle to a user
2) Checkin the bundle and do not scan one of the barcodes at
confirmation
* Note that the item not scanned is marked as lost
3) Navigate to the biblio for the lost item and note that it is marked
as lost.
4) Navigate to the biblio for the collection and expand the collection
item that contains the lost item. Note the item is marked as lost and
checkout details are listed.
5) Checkin the lost item
* The item should be marked as found and the return_claims line should
be marked as resolved.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the circulation system to account for bundle
checkins. We add a content verification step to ensure bundle content is
all present at checkin and we use this comparison to mark missing items
as lost.
Test plan
0) Apply patches up to this point
1) Checkin an item that belongs to a bundle
* An alert should be triggered noting that the item belongs to a
bundle
* The option to remove the item from the bundle should be clear
* Click remove should result in the alert dissapearing and the item
having been removed from the bundle.
2) Checkin an item bundle
* A modal confirmation dialog should appear requesting each item
barcode be scanned
* As items are scanned they should be highlighted in yellow in the
bundle content table
* Upon submission;
* The user will be alerted to any unexpected items that were
scanned and told to put them to one side.
* The user will be alerted that any missing items in the validation
will have been marked as lost.
* The bundle item will be marked as checked in.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds methods the the Koha::Item object for managing item
bundling operations and then exposes those methods via the REST API.
We include the new `BundleNotLoanValue` preference for setting not
for loan values when an item is added to a bundle.
Finally, we expose bundle management via the catalogue details page.
Test plan:
0) Apply patches up to this point and run the database update
1) Configuration: `BundleNotLoanValue` should have been set by the
database update and point to a newly added AV value.
2) Creating a new bundle
* Add a new bib record
* Mark the bib record as a 'collection' type by setting leader
position 7 to 'c'
* Add a new item to this bib record
* You should see a new 'Manage bundle' button available in the
'Actions' column of the Holdings table.
* Clicking 'Manage bundle' should expand the table to include a new
row directly beneath this one.
* Use the new 'Add to bundle' button that appears in this row to
trigger a modal that allows entering the barcode of items you wish
to add to the bundle
* Upon closing the modal, the bundle content table should reload and
contain your newly associated items.
* You can subsequently remove an item from a bundle using the new
'Remove' button.
3) Not for loan
* Items that have been added into a bundle should now appear as 'Not
for loan' from their original biblio record and note which bundle
they belong to.
4) Error cases
* Try adding an item that already belongs to a bundle to another
bundle: Note an error is displayed in the modal form.
5) The bundles feature can be disabled by unsetting the
`BundleNotLoanValue` system preference.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the only place we use the waiting_holds include, we were hard coded
to always pass the 'select_column' variable as true.
We can simply and clarify the logic by just removing this superflous
variable.
Test plan
1. Confirm that the waiting holds tables continue to display as expected
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the circulation sidebar menu to the article requests
page to make it consistent with other circulation module pages.
Test plan
1) Prior to applying the patch confirm that there is no sidebar on the
article requests management page, regardless of the CircSidebar
perference.
2) Apply the patch
3) Confirm there is still no sidebar when CircSidebar is disabled
4) Confirm there is now a sidebar present when CircSidebar is enabled
5) Confirm the current page is highlighted correctly in the sidebar when
on the article requests page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
cashup_modal.js consists only of jQuery code, so the whole thing should
be contained in a $(document).ready() function. This may or may not be
contributing to the behavior this bug is trying to fix.
Please note that this patch contains whitespace changes, so diff
accordingly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the erroneos duplication of the modal printing js.
Test plan
1) Create some transactions and perform a cashup.
2) Open the cashup summary modal
3) Click 'Print'
4) Cancel the print dialogue
5) Note that the dialogue re-appears
6) Apply the patch
7) Repeat and note the dialogue closes first time now.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
During cataloging a user may wish to add an item to a group when
creating a new item
This patch also copies the group description to the enumchron field
To test:
1 - Browse to details page for a record
2 - Create or ensure the record has item group(s)
3 - Click New->New item
4 - Note the bottom of the page has a form to attach to existing group, or create new
5 - Note when a group is selected the enumchron field is populated
6 - Confirm item is saved to group when saved
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Apply the patches for this bug
2) Run updatedatabase.pl
3) Restart all the things!
4) Enable the new syspref EnableItemGroups
5) Browse to detail.pl for a record with items
6) Note the new Item Groups tab
7) Test creating, editing and deleting groups
8) On the Holdings tab, select one or more items using the checkboxes
8) Note new selection options for setting an item group for items,
and for clearing an item group for items.
9) Test adding and clearing the item group for items
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the javascript for the checkouts table to add the
checkbox back in for the case where too_unseen is the error returned by
CanBookBeRenewed, allowing such issues to be renewed.
Signed-off-by: Caroline <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the colspan from biblio-level course reserves rows in
favor of adding a style to the message's container allowing it to
overflow across table cells.
To test, apply the patch and go to course reserves.
1. If necessary, add a new course.
2. View the details of the course and add a reserve using the
biblionumber option to add the reserve at the bibliographic level.
3. Add a notes if you want, then click "Save."
4. Return to the course detail view.
5. In the table of reserves your biblio-level reserve should have a
message starting in the "Barcode" column and overflowing across other
item information columns, "Item information is not available for
record-level course reserve."
6. Try adding multiple item-level and biblio-level reserves to the same
course to confirm that the information displays well in those cases.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit adds a different message when cloning circulation and fine rules if you use the Standard rules for all libraries option.
Test plan :
1. Go to the Circulation and fine rules page in the Admin tab.
2. Check that the 'Select a library' menu is on 'Standard rules for all libraries'.
3. Check that you also have some random rules to clone, or create some.
4. Clone these rules to the library of your choice.
5. Confirm that the message 'Clone circulation and fine rules from "" to (library of your choice)' appears.
6. Now clone rules from a specific library to another one, and repeat steps 3-4.
7. Confirm that this time, the message will displays both libraries properly.
8. Apply patch.
9. Repeat steps 2 to 4 and 6 to 7. Confirm that this time, the message in the first case will be 'Cloning circulation and fine rules to "(library of your choice)"'.
10. Kindly sign off.
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test:
1. Login to the staff interface
2. First you need to create an overdue item.
a. Find the barcode for an item
b. Goto My checkouts from the drop down by your login
c. Enter the barcode and use checkout settings to select a date in the
past.
2. Go to Tools
3. Go to Circulation
4. Go to Go to Overdues
5. In the table the due date is in black
6. Apply the patch
7. Refresh the page and the due date should be in red.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Please test and confirm terminology is now correct.
Was unable to test without steps to reproduce.
Sponsored-by: Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN:
1. Trigger the Cannot cancel receipt error in invoices OR look at the
amended string to see the additional space has been removed.
Sponsored by Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan
Login to staff interface
Go to Administration. Search EnableExpiredPasswordReset. Enable this preference. Save.
Find your patron record and go to details.
In the ‘OPAC/Staff interface login’ section, set the Password expiration date to the previous day. Save.
Open the OPAC in a new window.
Login to your account. It will fail. Click Reset your password.
Follow the process to add a new password. Click update password.
See that it says ‘Go to staff interface’
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Login to the staff interface
2. go to tools
3. go to label creator
4. Click New -> Layout
5. Click the 'Choose layout type' dropdown
6. Notice the 'barcode proceeds biblio data' and 'biblio data proceeds
barcode'. These are typos
7. Apply the patch and refresh the page
8 repeat step 5. Confirm 'proceeds' now correctly says 'precedes'
Sponsored by: Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add additional clarifcation, format NOTE: similar to most other
notes in system preferences (bold, start on a new line), and link
to other system preferences mentioned.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN:
1. On the Admin page, navigate to Koha Administration > Global System
Preferences
2. Search for OPACMandatoryHoldDates
3. In the Value field, check that it now says On the "Placing a hold"
form, instead of opac-reserve form.
Sponsored by Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Look at koha-tmpl/intranet-tmpl/prog/en/modules/circ/returns.tt
2. Note that it says 'Lost reserve'
3. Apply patch
4. Note that it says 'Lost hold'
Note:
I was not able to trigger the behaviour to see the text in question
Sponsored-by: Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Inspect `koha-tmpl/intranet-tmpl/prog/en/modules/circ/returns.tt`, notice that on line 136 it says "Cancelled reserve"
2. Apply patch
3. Inspect the same line again and notice it now correctly says "Cancelled hold"
4. ???
5. Profit!
Sponsored-by: Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the Koha staff interface go to administration.
Go to TalkingTechItivaPhoneNotification. Enable this preference. Save.
Go to Tools > Overdue notice/status triggers
Check that ‘Phone (i-tiva)’ is an option for notice types.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch uses the existing format_price JS include to format prices in
the cashup summary modal
Test plan
1) Create some transactions and a cashup
2) View the cashup summary modal and confirm amounts are not nicely
formatted
3) Apply patch
4) Confirm amounts in cashup summary modals are now nicely formatted
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. First step is to go to administration > then system preferences
2. Set unseenrenewal to "allow"
3. Go to administatrion > circulation and fines rule
4. Set unseenrenewals count to any number
5. Check out an item to a patron and go to the checkouts tab
6. Renew the item
7. Notice that the renewal messages have no seperation
8. Apply the patch
9. Notice there is now a "&" in the spacing between renewal messages
Sponsored-by: Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replace occurences of 'Notices & slips' with 'Notices and slips'
(replacing '&' and '&' with 'and'), as per the terminology
guidelines.
See the terminology list:
https://wiki.koha-community.org/wiki/Terminology
Test plan:
1. Find occurrences of 'Notices & slips':
- git grep 'Notices & slips' -- :^misc/translator/po
- git grep 'Notices & slips'
2. Review places in the staff interface where 'Messages & slips' is
displayed:
- Tools home page
- Tools > Notices & slips: page title and breadcrumb
- Other breadcrumbs:
. Tools > Notices & slips > New notice > [select any module]
. Tools > Notices & slips > [select Edit for any notice]
. Tools > Notices & slips > [select Delete for any notice]
3. Review other occurences:
. The cron job description for misc/cronjobs/holds/holds_reminder.pl:
misc/cronjobs/holds/holds_reminder.pl -man (scroll down to the
description)
. The TalkingTech README file:
vi misc/cronjobs/thirdparty/TalkingTech.README
4. Apply the patch.
5. Re-run the grep queries from step 1 - no occurences are now found.
6. Review places where 'Notices & slips' was found in steps 2 and 3 -
these should all be replaced with 'Notices and slips' and should
read correctly.
7. Sign off!
Alernative: review the diff for the patch and check that occurences of
'&' and '&' are replaced with 'and' and the updated text reads
correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch just fixes a missing permission on the intranet main page. Currently, the Additional Content modules allows people to edit, modify or create new additional content just by checking if they have any tool permission at all, and not the right one.
To test:
1 - From the staff client, create a news article for the intranet.
2 - Create (or use) an additional staff patron, giving them the necessary permissions to access the intranet, but no tool permission.
3 - Using another browser (or incognito mode), log on the intranet page with your new staff account, you should be able to see the news content, but not edit or delete it. That's the expected behavior.
4 - From your main admin account, give your test account the edit_additional_contents permission.
5 - Your test account should now be able to edit/delete the news content. This is also expected behavior.
6 - Using the main account again, remove this time the edit_additional_contents but add any other subtool permission (edit_calendar is a good one for instance)
7 - Repeat step 5 and confirm that your test account can still edit or delete the news content. This shouldn't happen.
8 - Apply patch
9 - Repeat steps 4-6, and confirm that your test account can now only edit or delete news content if they have the edit_additional_contents permission enabled.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes a small typo at
koha-tmpl/intranet-tmpl/prog/en/modules/reserve/request.tt:574
To test:
1 - Set item-level_itypes in administrative preferences to
bibliographic record
2 - Navigate to /reserve/request.pl in admin interface
3 - Notice that the typo is there in hold details
4 - Apply Patch
5 - Typo is fixed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the subscription entry form so that it will perform
a check on the staffdisplaycount and opacdisplaycount fields before
proceding to the second step. It verifies that the values are numeric.
The changes are made in the style of the existing form validation, which
should be rewritten to either use the validation plugin or to peform
checks in a way that all checks are run before warning the user.
However, this smaller change will work in the meantime.
To test, apply the patch and go to Serials -> New subscription.
- Fill out the form with at least the required fields, but put something
other than a number if the "Number of issues to display to staff" and
"Number of issues to display to the public" with non-numeric characters.
- When you click the "Next" button you should get an error message,
"Number of issues to display to staff must be a number."
- Correct the issues to display to staff field and submit again.
- You should get a different error message, "Number of issues to display
to the public must be a number."
- Correct this field and you should be able to proceed to the next step.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to MARC bibliographic framework, pick a framework and go to 952, subfield "o". Turn the cn_browser plugin on.
2. Pick or create an item in that framework, edit that item.
3. TO the right of the 952$o notice the "...". Click that start the call number browser.
4. Notice there is no column for collection.
5. Apply patch, restart_all
6. Notice there is now a column for with the items collection.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In input fields we always use the decimal . while the display format
uses the decimal separtor definded by CurrencyFormat. When adding a
manual invoice without this patch, the amount is shown with comma, but
it should be . in the input field.
To test:
1- Go in Administration->Debit types
2- Click on New debit type
3- Fill the form:
Code: USEDBOOK
Default amount: 0.50
Description: Used book
Can be manually invoiced: Yes
4- Save
5- Go to any patron account
6- Go to the "Accounting" tab
7- Click on "Create manual invoice"
8- Fill the form
9- Choose the created debit (Used book)
10- Verify that the format is incorrect (0,50 instead of 0.50)
11- Apply the patch
12- Verify the amount is now using the correct format
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the biblio-title include so that it can be used to
link to the bibliographic record using the default biblio view.
On pages where the biblio-title include was wrapped in an anchor tag, a
link parameter is added: [% INCLUDE 'biblio-title.inc' link=> 1 %]
To test, apply the patch and view the following pages in the OPAC to
confirm that titles are displayed correctly and that the link to the
bibliographic record is correct:
- Log in to the OPAC: On the "your summary" page, check checkouts,
overdues, holds, and article requests.
- Check the "your holds history" page.
- Locate a bibliographic record and click "Save to your lists."
In the popup, the title should be displayed correctly without a link.
- Place a hold, and check the hold confirmation page.
- Check the "Recent comments" page.
- Locate a record which has a local cover image attached, and view the
image.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Changes:
* branch to library
* staff client to staff interface
* adds an ending .
To test:
- Compare system preference descrpition before and after the
patch was applied.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rename the issues.renewals field to renewals_count to prevent a method
name collision with the new relation accessor introduced by this
patchset.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to the admin page.
2. Search for the above preference.
3. Confirm that "Will" is now spelled correctly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects OPAC templates which tried to use a jsTree image
asset which is missing following the jsTree upgrade (see Bug 11873).
Templates should use /images/spinner-small.gif instead.
To test, apply the patch and enable OpenLibrarySearch and populate
OverDrive and RecordedBooks preferences with credentials (they don't
have to be valid).
Perform a catalog search in the OPAC. When the search results page first
loads you should see messages about the services being queried:
Searching OpenLibrary...
Searching RecordedBoks...
Searching OverDrive...
Each should show a working "spinner" image while the queries are being
performed. If you have valid OverDrive credentials you can try clicking
through to the OverDrive search results page to confirm that the image
is working on that page too.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Confirm 952$o is not linked to a plugin in the default marc framework
2 - Send some tiems to batch modification
3 - Confirm you can select RegEx as an option for callnumber during modification
4 - Link 952$o to the cn_browser.pl plugin
5 - Repeat batch modification
6 - Note there is no regex option
7 - Apply patch
8 - Confirm there is a regex option
9 - Unlink 952$o from plugin
10 - Confirm you still have a regex option in batch modification
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Several fixes :
- Replace tab with spaces
tag_210 :
- Class 'value' and not 'valeur'
- Loop on subfields must restrict to abcdg otherwise last() may not be
correct (ie 214r and 214s)
tag_214 :
- Condition for coma after b should be same as after a : "position() != last()"
tag_210 and tag_214 :
- Space before ':' like in other fields
- ':' before c or g does not exist in opac, removed from intranet file
- Search links in intranet fixed (where composed with opac-search ^^)
- Search links using 'str:encode-uri' like other places
- Simplify title attribute with only 'Search for publisher' => Bad idea
to use double quotes in a text
tag_214_s and tag_214_r :
- Loop on field+subfield otherwise last() may not be correct
I've fixed intranet and copied to OPAC (only adapted search links)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
test plan :
- Apply patch
- Find a record with a B214
- Check on both Opac-Details and Opac-Result that the field is
displayed.
- Do the same checks on catalogue/search results and catalogue/details
in Staff interface.
- Add a 210 field to the record (legacy)
- It should be displayed as well
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
This patch updates the jQuery Validation plugin in both the OPAC and
staff interface. This upgrade brings the plugin to the current latest
version (1.19.4) which includes compatibility fixes for the latest
version of jQuery.
To test, apply the patch and test various forms in the OPAC and staff
interface to confirm that validation is still working correctly.
In the OPAC:
- Patron self-registration: Required fields, password match
and complexity. Test also the "Forgot password" and "Change password"
interfaces.
In the staff interface, for example:
- Patrons -> Patron password change: Required fields, password match and
complexity.
- Administration -> Patron categories -> New category:
- Required fields
- One or the other enrollment period inputs
- Digits required in password expiration, age required, upper age
limit
- Numbers required in enrollment and hold fee.
- Administration -> Budgets -> New budget:
- Required fields
- End date must be after start date
- Administration -> Cities & towns: Required fields
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
