Cancel replacing carriage return with <br /> in printed html file as <br /> is needed in model for email notices when html format is checked
Test plan :
* define an OVERDUE notice with html activated, with <br /> at each end of line
* make sur you've got some borrowers with overdues meeting your notices triggering rules (some with valid email and others without)
* run overdue_notices.pl -html to generate html files for borrowers without email
Without patch
* email notifications are correctly formated as html content, with one <br /> at each end of line
* in html file, <br /> is duplicated at each end of line
With patch
* nothing changes for email notification
* html file is correctly formatted with only one <br /> at each end of line
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Copied test plan from comment.
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
So the first patron receives correct letters, but the followings received
all the previous ones AND his letters.
Eventually you end up with !n letters in message_queue where n = amount of patrons
receiving due messages as digest and having something due.
Eventually we got 4 000 000 ODUEDGST-letters of which 1 100 000 were sent to our patrons :)
This is madness!
Test plan:
0/ Delete the content of the message_queue table.
1/ Pick 3 patrons and set them to receive due messages as digest.
2/ Check 1 item out for 3 separate patrons and specify a due date today.
3/ Launch the advance_notices.pl script.
4/ Before this patch, you got 6 notices (1+2+3 [!n]). Now, you get 3 notices, 1 for each patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Problem exis.
Patch work as described following test plan.
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Using perl v5.18, the following is warned on updating/installing
templates:
Smartmatch is experimental at ./translate line 54.
Moreover, the following should exist with previous perl versions:
perlcritic xgettext
Subroutine prototypes used at line 29, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 44, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 60, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 72, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 89, column 1. See page 194 of PBP.
(Severity: 5)
Variable declared in conditional statement at line 105, column 13.
Declare variables outside of the condition. (Severity: 5)
Subroutine prototypes used at line 127, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 136, column 1. See page 194 of PBP.
(Severity: 5)
Variable declared in conditional statement at line 190, column 7.
Declare variables outside of the condition. (Severity: 5)
Subroutine prototypes used at line 237, column 1. See page 194 of PBP.
(Severity: 5)
Bareword file handle opened at line 238, column 5. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 238, column 5. See page 207 of PBP.
(Severity: 5)
Subroutine prototypes used at line 277, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 311, column 1. See page 194 of PBP.
(Severity: 5)
Bareword file handle opened at line 350, column 9. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 350, column 9. See page 207 of PBP.
(Severity: 5)
Bareword file handle opened at line 353, column 5. See pages 202,204 of
PBP. (Severity: 5)
Bareword file handle opened at line 359, column 5. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 359, column 5. See page 207 of PBP.
(Severity: 5)
perl -wc xgettext.pl
\1 better written as $1 at TmplTokenizer.pm line 474.
main::token_negligible_p() called too early to check prototype at
xgettext.pl line 52.
xgettext.pl syntax OK
Test plan:
Apply this patch and verify the warnings/errors does not appear anymore
and no regression is found on creating/updating/installing templates.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errros.
Tested with perl v5.18.2
No warnings, no problem detected on create/update/install i18n files
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10833 introduced a variable loop but does not reset it every
iteration.
So the first patron receives correct letters, but the following ones
received all the previous ones as well as their own notices
Test plan:
0/ Delete the content of the message_queue table.
1/ Define advanced notices sent 2 days in advance for 2 patrons.
2/ Check 1 item out for each one and specify a due date today + 2 days.
3/ Launch the advance_notices.pl script.
4/ Before this patch, you got 3 notices. Now, you get 2 notices, 1 for
each patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work well, no errors.
Tested following test plan, printing on screen or saving into db,
3 messages before, 2 after (advance_notices.pl -v -n -m 2 -c)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Also removes a commented line that changed the value of $confirm.
If it would default to 1, we do not need it at all.
I am not saying that we need it, but just documenting that we have it.
Signed-off-by: Marc Véron <veron@veron.ch>
Small change in documentation.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Manual edit of the release notes to hopefully make
them more useful. Also added reminder about the
deprecation of the prog and CCSR public catalog
themes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Instead of writing
use CGI;
use Koha::I18N;
my $cgi = new CGI;
my $lh = Koha::I18N->get_handle_from_context($cgi, 'intranet');
print $lh->maketext('my translatable text');
you can now write
use Koha::I18N;
print gettext('my translatable text');
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
CHARSET is now automatically replaced by UTF-8, and 'update' creates the
PO file if it does not exist.
Also do not try to create PO files if POT file creation failed (when
there is no messages to translate for example).
+ add some verbosity
+ add Locale::Maketext and Locale::Maketext::Lexicon to Koha
dependencies
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
You have to use the new module Koha::I18N
Code example:
use Koha::I18N;
use CGI;
my $input = new CGI;
my $lh = Koha::I18N->get_handle_from_context($input, 'intranet');
print $lh->maketext("Localized string!");
PO files are in misc/translator/po/LANG-messages.po.
Creation of PO files are integrated to existing workflow, so to create
PO file for a language, just run in misc/translator:
./translate create LANG
To update:
./translate update LANG
You can then translate the PO with your favorite editor. Strings will be
localized at runtime.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. Some details needing further attention noted on bug
report.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The initial patch for this bug did not include a specific command line
option for customization. If a module LocalChanges.pm existed, it would
be used without asking.
This patch adds a command line option enabling the customization option
and offering the extra possibility of using another module name. If no file
name is passed, we default to LocalChanges.
Without the -custom option, behavior is as it was.
Also some POD lines are added to document the feature.
Test plan:
[1] Make a LocalChanges.pm in migration_tools. Verify that it is not used,
if you do not enable the -cust parameter.
[2] Run the script again with -cust. Verify that it is called now.
[3] Copy LocalChanges.pm to Whatever.pm. Make some change. Run with
-cust Whatever and verify that the new module is used.
[4] Copy Whatever.pm to another dir, make some change. Run with -cust and the
full name. Verify that the latest change was used.
[5] Run without any option. Check the pod documentation.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes two adjustments:
[1] For the verbose option, verbose level 2 now means print the
formatted version of each record.
[2] If a module LocalChanges.pm is found in misc/migration_tools, the
routine "customize" in this module is called for each marc record.
This allows you to make local changes to these marc records before
importing them.
Test plan:
[1] Test the verbose option: a single -v for medium verbosity and two
-v to dump a human-readable version of the record to standard output.
(Do not yet copy LocalChanges.pm in the folder.)
You may used the attached example file on Bugzilla:
perl misc/migration_tools/bulkmarcimport.pl -file zztest01.xml -v -v -b -m XML -t | more
Note the option t for test; no records will be imported.
[2] Copy LocalChanges.pm in the migration_tools folder. You may use the
example provided on Bugzilla (in a patch). If you use the example module,
check the contents of 001, 005 and 590 fields. (The -v -v option allows
you to easily check that.)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The *_PHONE notices (HOLD_PHONE, PREDUE_PHONE and OVERDUE_PHONE) should
be "merged" into the main code (i.e. HOLD, PREDUE and OVERDUE).
Test plan:
1/ Make sure you have HOLD_PHONE, PREDUE_PHONE and OVERDUE_PHONE notices
2/ Execute the update DB entry
3/ Verify the 3 notices have been merged into "phone" template of the
HOLD, PREDUE and OVERDUE notices
4/ Verify there is no regression in the Talking Tech feature (how?)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Verified that notices are merged
TalkingTech_itiva_outbound.pl runs without problem... but can't produce
any output, may be not correctly configured (my setup), no warnings
nor log messages
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- Choose 2 patrons P1 and P2
- Edit "Patron messaging preferences" and
check SMS + email with 2 days in advance for P1
check email with 5 days in advance for P2
- defined a message for the letter code PREDUE for sms and email
(tools/letters.pl).
- select 2 barcodes (B1, B2).
* checkout B1 to P1 with a due date = NOW - 2 days
* checkout B2 to P2 with a due date = NOW - 5 days
- into the mysql cli, note the value of unsent message:
select count(*) from message_queue where status != "send";
- launch the cronjob:
perl misc/cronjobs/advance_notices.pl -c
- retry the previous sql query, you should have X + 3 unsent messages
(depending of current checkouts in your DB!).
- view all unsent message:
select borrowernumber, letter_code, message_transport_type, content
from message_queue where status != "send";
You should see:
2 messages for P1, 1 for sms, 1 for email and the letter code PREDUE
1 message for P2, email and the letter code PREDUE
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If overdues should be sent to some patron (on the same branch), only the
first one was notified.
This patch fixes this issue.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- define some complex overdue rules (tools/overduerules.pl).
For example:
First overdue from 2 to 5 days by sms and email with letter code L1
Second overdue from 5 to 15 days by email with letter code L2
Third overdue from 15 days by print with letter code L3
- define a message for each transport type selected (tools/letters.pl).
- select 3 patrons (P1, P2, P3) and 3 barcodes (B1, B2, B3).
* checkout B1 to P1 with a due date = NOW + 3 days
* checkout B2 to P2 with a due date = NOW + 10 days
* checkout B3 to P3 with a due date = NOW + 20 days
- into the mysql cli, note the value of unsent message:
select count(*) from message_queue where status != "send";
- launch the cronjob:
perl misc/cronjobs/overdue_notices.pl
- retry the previous sql query, you should have X + 4 unsent messages
(depending of current checkouts in your DB!).
- view all unsent message:
select borrowernumber, letter_code, message_transport_type, content
from message_queue where status != "send";
You should see:
2 messages for P1, 1 for sms, 1 for email and the letter code L1
1 message for P2, 1 for email and the letter code L2
1 message for P3, 1 for print and the letter code L3
- Specific case: If a user don't have a smsalertnumber and a sms is
required or if a user don't have an email defined and an email is
required, a print notice is generated.
A print notice is generated only 1 time per borrower and per level.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The message_transport_type param should passed to GetPreparedLetter, not
part of the "tables" parameter.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The HOLD_PRINT and HOLD_PHONE notices become useless.
This patch modifies existing notices in order to group them into the
main notice type 'HOLD', with any pre-existing print and phone
templates in the appropriate places.
Test plan:
- Apply the patch and execute the update database entry.
- Verify that your previous HOLD_PHONE and HOLD_PRINT are displayed
when editing the HOLD notice (under phone and print).
- Choose a patron and check SMS, email, phone for "Hold filled"
(on the patron messaging preferences).
- Place a hold.
- Check the item in and confirm the hold.
- If the patron has an email *and* a SMS number, 2 new messages are put
into the message_queue table: 1 sms and 1 email.
If the patron does not have 1 of them, there are 2 new messages: 1
sms/email and 1 print.
If the user has neither of them, there is 1 new message: 1 print.
- The generated messages should correspond with the notices defined,
depending the message transport type.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Just noting that if email and SMS are disabled in the msg prefs, the user
will not have a print message.
And if the SMS driver fails, the record status in message_queue is 'failed',
but staff may not be aware of that.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes several types of strings from the
PO files that cannot be usefully translated, including
ones that consist entirely of punctuation and/or HTML entities.
Test:
1) Update PO files of some lang, xx-YY-*po
cd misc/translator
perl translate update xx-YY
2) Do it again, just in case
3) rm po/xx-YY*po~
4) Extract all msgid's, sorted
cat po/xx-YY*po | egrep "^msgid" | sort | uniq > xx-YY-pre
5) Apply the patch
6) Repeat 1-3
7) Repeat 4 again, other file
cat po/xx-YY*po | egrep "^msgid" | sort | uniq > xx-YY-post
8) Do a diff, inspect results, only strings with %s and \s
diff xx-YY-pre xx-YY-post | less
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described, 380 strings less to 'translate'
No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
koha.psgi example and plackup.sh script to run any Koha site
intranet or opac interface under Plack with optional multi-process
Starman server
plackup.sh site-name [intranet]
site-name is used to find config /etc/koha/sites/site-name/koha-conf.xml
All configuration is specified in koha.psgi, which you are welcome to edit
and tune according to your development needs (enable memcache, enable/disable
debugging modules for plack and so on).
For deployment of opac or intranet you would probably want to take a look
in plackup.sh and enable starman as web server (which is pre-forking server
written in perl) and put some web server in front of it to serve static web
files (e.g. ngnix, apache)
When you are happy with it, rename koha.psgi and plackup.sh it to site name
and save it for safe-keeping.
This commit message is included in patch as README.plack because it includes
useful information for people using plack for first time.
Test scenario:
1. install plack and dependencies, as documented at
http://wiki.koha-community.org/wiki/Plack
2. start ./plackup.sh sitename i[ntranet]
3. open intranet page http://localhost:5001/ and verify that it redirects
to http://localhost:5001/cgi-bin/koha/mainpage.pl
4. start ./plackup.sh sitename
5. open OPAC http://localhost:5000/ and verify that it redirects to
http://localhost:5000/cgi-bin/koha/opac-main.pl
6. next step is to take a look into koha.psgi and enable additional
debug modules, save file and reload page (plackup will reload
code automatically)
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised. As I have explained in a comment on the bug
this looks like a very good starting point, and we can argue about
the details and add more options over time. Very happy to sign
this off! (My earlier concern about / not working has now been
taken care of, thanks Dobrica!)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The sharedate column is documented as having the following meaning:
"date of invitation or acceptance of invitation"
This patch adjust the new list-sharing code to stick with that
interpretation, as otherwise the column should have been renamed
to 'invite_expiration_date' or the like.
It also removes the "housekeeping" functionality from AddShare, as
otherwise the routine should have been named AddShareAndDoOtherStuff.
To prevent list shares from piling up, a new --list-invites flag
has been added to cleanup_database.pl. The default crontabs have
been modified to use the --list-invites flag by default.
To test
-------
[1] Make some list share invites and accept some, but now all of them.
[2] Wait 14 days (or more reasonably, manually edit the sharedate
values for the unaccepted shares to put them at least 14 days in the
past.).
[3] Run cleanup_database.pl --list-invites
[4] Verify that accepted shares remain, as to share invites that have
not yet reached more than 14 days of age.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is a very basic start to a sip server testing script.
I imagine we will want to make it interactive in end,
essentially replicating what a SIP based self-checkout machine does.
Signed-off-by: Adrien Saurat <adrien.saurat@biblibre.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If a notice is defined for the library of the patron, it should be
used.
Without this patch, the notice used is the one defined for all
libraries.
Test plan:
1/ Set the advanced notice for a patron using digest.
2/ Check one item out to this patron (backdate the return date according
the days in advance value).
3/ launch advance_notices.pl -c
4/ Verify the notice used is the default one.
5/ Define a notice for the library of the patron for PREDUEDGST
6/ launch advance_notices.pl -c
7/ Verify the notice used is the one previously defined.
8/ Check one item out to this patron (date due = today)
9/ launch advance_notices.pl -c
10/ Verify the notice used is the default one.
11/ Define a notice for the library of the patron for DUEDGST
12/ launch advance_notices.pl -c
13/ Verify the notice used is the one previously defined.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Test case: User from Library A, checked out books
- in library A from A and B
- in library B from B
Verified, that the 'all libraries' notice is still used,
when no specific notice is defined.
Verified, that the patron's home library noticed is used,
when defined.
Note: Before and after the patch we print the branch information
from the patron's home library, so also using the template from
this branch, seems logical. All items over all branches are
processed into one single reminder email, before and after the patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The SQL column headers is stored into the columns.def file.
This file is not managed by the translation script.
This patch makes possible the headers translation.
Note: The translation xml tags were added to avoid all lines being put
on a single line.
Test plan:
1/ update your po file
cd misc/translate;
perl translate -f columns update LANG # Replace by another language here
2/ translate header columns (search "columns.def" in your po file).
3/ install the translated columns.def
perl translate -f columns install LANG # Replace by another language here
4/ go on the report module > create a new report > next > next
5/ change the language
on the 3rd step, you should see the column header translated.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
[on es-ES about a third of the strings translated!! :-) ]
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and fixes a long standing translation
problem.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Show 'Unknown' when planneddate and publisheddate cannot be calculated
Also fixes SQL query in misc/cronjobs/serialsUpdate.pl that was still
using "periodicity != 32" to exclude irregular subscriptions from
results
Test plan:
1) Create a subscription in the serials module. Make sure to choose:
Frequency = Irregular
2) Test the prediction pattern, first publication date is set to
"First issue publication date" field, others will show as
'unknown'
3) Save the subscription
4) Check the created issue - it will show a published date and a
planned date (same as "First issue publication date" field)
5) Receive the issue and check the next generated issue, planned
date and published date should show as 'Unknown'
6) Generate a next issue, planned date and published date should
also show as 'Unknown'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested:
- multi receiving generates mulitple issues without dates - 'unknown'
- staff detail page shows the dates empty, which is fine
- OPAC detail page shows the dates empty, which is fine
- serial collection page shows 'unknown' and those issues appear
on the 'manage' tab, as they did in the past
- Editing the issue from the serial collection page leaves the
date fields empty.
- Receving the issue, setting the status to 'Arrived' the Expected on
date is set to 'today' automatically. Date published has to be
entered manually (maybe something we could improve later
- subscription detail > issues tab shows Uknown.
- t/db_dependent/Serials/GetNextDate.t pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It would be good to be able to specifically target import records from
Z39.50 for cleanup.
Test Plan:
1) Apply this patch
2) Import one or more batch record sets into Koha
3) Perform some Z39.50 searches
4) Run this command: misc/cronjobs/cleanup_database.pl -v --z3950
5) Verify that only Z39.50 records were deleted
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch enable deletion of temp files used by
tmpl_process3.pl.
Just removed coments on existing code
To test:
1. Do a count of files on /tmp ( ls /tmp | wc -l )
2. Update preferred language
3. Count again, new files on /tmp
4. Apply the patch
5. Update again, check, no new files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I watched what temp files were actually in /tmp to make
sure other processes didn't magically increase/decrease
the number.
$ perl translate update {lang code}
generated 10 temporary files for me (2x5 po files). After
removing those ten files, and applying the patch, no
other files were generated.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
These lines has been commented by commit
a399dcefad without any apparent good
reason.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
We have a number of reports of libraries that were upset by Bug 10720
being fixed! These libraries preferred this single file output, but as
text only. We should bring back this behavior, but as a feature, not a
bug.
Test Plan:
1) Apply this patch
2) Run overdue_notices.pl --html
3) Note the output is wrapped in html tags
4) Run overdue_notices.pl --text
5) Note the same output, but not wrapped in html tags
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
To test, add the -n parameter.
The filename generation could be refactored but not blocker.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds three optional parameters to runreport.pl
to allow authentication with the SMTP server.
--username -> Username to pass to the SMTP server for
authentication
--password -> Password to pass to the SMTP server for
authentication
--method -> Method is the type of authentication.
Ie. LOGIN, DIGEST-MD5, etc.
Test Plan
---------
As for testing manually using a Gmail account:
1. Set up your sendmail as shown in
misc/cronjobs/CONFIGURE.gmail
2. Before applying this patch, run misc/cronjobs/runreports.pl
on your favorite report including the proper email parameters
against your gmail account.
3. Note the failure message stating the authentication
requirement.
4. Apply this patch, and return the script including the
additional parameters and specifying "LOGIN" for the method.
5. Note the successful send.
6. perldoc misc/cronjobs/runreport.pl
7. Run the koha qa test tool.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch expands and reformats the help text displayed
when running remove_unused_authorities.pl -h.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
remove_unused_authorities.pl previously required that --aut be supplied
to specify one or more authority types to check for unlinked authority
records. If --aut was omitted, it would default to search for
records of authority type NC, which is not present in many (or any?)
Koha databases.
Now, if --aut is omitted, unlinked authority records of any type
are removed.
To test it:
Parse only PERSO_NAME authorities:
misc/migration_tools/remove_unused_authorities.pl -aut PERSO_NAME
Parse all authorities:
misc/migration_tools/remove_unused_authorities.pl
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 7688 changed the prototype for GetNextDate, but the serialsUpdate.pl
cronjob script had not been updated. This patch fixes the problem.
Test plan:
Before applying the patch:
1/ Check that the following SQL query returns something:
SELECT serial.*
FROM serial
LEFT JOIN subscription ON (subscription.subscriptionid = serial.subscriptionid)
WHERE serial.status = 1
AND DATE_ADD(planneddate, INTERVAL CAST(graceperiod AS SIGNED) DAY) < NOW()
AND subscription.closed = 0;
2/ Run misc/cronjobs/serialsUpdate.pl -v
It should die with an error message like this:
Can't use string ("2011-03-05") as a HASH ref while "strict refs" in use
3/ Apply the patch
4/ Run misc/cronjobs/serialsUpdate.pl -v
It should exit normally and print messages like this:
Serial issue with id=XX updated
5/ Run the Koha QA test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Keeps current behaviour as default.
The -append option is described in the POD and works as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Adding a date/time to the output might
be good, to make it easier to find the entry you were looking for.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The problem is with the name of PO files
Currently Koha expect, among other variants, that PO filenames
began with (using as example *-pref.po):
{lang}-pref.po
{lang}-{region}-pref.po
{lang}-{script}-pref.po
{lang}-{script}-{region}-pref.po
and expect 2 chars for lang and region, and 4 for script
So the problem with Thai translation files are that it's names
do not match that convention.
This patch only rename Thai files as th-THA-* to th-TH-*.
In that way language description is right.
translate script use that chars to make dirs, and use dirs to find
description.
To test:
1) Go to I18N/L10N sysprefs
2) Install th-THA language (or simply mkdir koha-tmpl/intranet-tmpl/prog/th-THA)
3) Reload page, wrong description
4) Apply patch
5) Install th-TH language (or simply mkdir koha-tmpl/intranet-tmpl/prog/th-TH)
6) Reload page, right description
7) If you want do "mkdir koha-tmpl/intranet-tmpl/prog/th-Thai", reload,
also right description
To the reporter of this Bug: the rename of the folder is a good
workaround, when this patch is pushed to stable I'll rename Thai
files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
This does not correct existing problems which need human
intervention. It does, however, allow for a correct installation
of Thai after the patch is made.
If we really want a patch for fixing an existing install. I
wrote it, but have not tested it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
As pointed out by Mark, this does not fix existing installations.
Putting a note in the release notes might be something we can do here.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
installer/data/mysql/sysprefs.sql has semicolon as default.
This fixes both instances to use the same fallback value.
It also prevents CSV header info from being included in non-CSV messages.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
