With the inclusion of this patch, all searches will (try) to use
QueryParser for handling queries for both the bibliographic and authority
databases if UseQueryParser is enabled. If QueryParser is unavailable,
UseQueryParser is disabled, or the search uses CCL indexes, the old
search code will be used.
To test:
1) Apply patch.
2) Run the unit test with `prove t/QueryParser.t`
3) Enable the UseQueryParser syspref.
4) Try searches that should return results in the following places:
* OPAC (simple search)
* OPAC (advanced search)
* OPAC (authorities)
* Staff client (header search)
* Staff client (advanced search)
* Staff client (cataloging search)
* Staff client (authorities)
* Staff client (importing a batch using a match point)
* Staff client (searching for an item for adding to a label)
* Staff client (acquisitions)
* Staff client (searching for a record to create a serial)
* ANYWHERE ELSE I HAVE FORGOTTEN
5) Disable the UseQueryParser syspref. Repeat at least some of the
searches you did above.
6) If all searches worked, sign off.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Searching still works as expected for variuos places.
QueryParser syspref seemed to be enabled by default
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Reviewing Bug 9649, this bug comes up.
This patch correctly sort frameworks by description.
To test:
1) Go to Cataloguing home, button 'New record' shows
unordered list of frameworks
2) Apply the patch
3) refresh, the list must be correctly sorted.
Revised to sort using uppercase.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
It's been a while since this bug is around. This normalization is only
used for UNIMARC and yields a fatal error when those variables are set
on (at least) MARC21 setups.
Regards
To+
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: update comment
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Seems like simple omission when passing $pars hash to
Z3950Search function.
Test scenario:
1. select any Z39.50 search form and enter valid ISSN
2. verify that you don't get any results from remote servers
3. apply this patch and re-check that results are now availble
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a new system preference to set the UNIMARC field 100 default language.
The default value for that system preference is 'fre'.
Changed Biblio.pm to use the system preference:
- if the language is bad filled in the preferences it uses 'fre' as default value
- only replaces the language when the field 100 is empty
- if the language is filled with the plugin only replaces the positions 25-28 to 'y50'
Signed-off-by: Rolando Isodoro <rolando.isidoro@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When using fast cataloguing to create a biblio and item on the fly, workflow looses datas when a duplicate is detected.
This comes from the use of a mix of circborrowernumber and borrowernumber in forms.
This patch corrects by using always circborrowernumber in fast cataloguing workflow.
Also adds html and uri escape for barecode where necessery.
Test plan :
With duplicate :
- Go to a borrower circulation page
- Enter a non existing barcode
- Enter a due date
- Click on "Check Out"
=> a message says the barcode was not found
- Click on "Fast cataloguing"
=> The biblio edition page appears with fast cataloguing framework
- Fill mandatory fields by using an existing ISBN
- Click on "Save"
=> a yes/no message says "Duplicate record suspected"
(Choosing yes will brake fast caloguing workflow, in this case librarian should create an item and checkout again)
- Click on "No"
=> The item edition page appears with barcode already filled
- Fill mandatory datas
- Click on "Add item"
=> Borrower circulation page appears again, check that item has been checked out with the specified due date
You may test without duplicate
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested following the plan and by fast cataloging a non-duplicate.
All works as expected.
Signed-off-by: koha.aixmarseille <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Remove some debug warnings, fix indentation
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
As a first step in realizing the goals of report 6536 (Z3950 Search improvements), this patch moves identical code in acquisition and cataloging to module level.
A followup deals with formatting.
Note that this patch should not change any behavior.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I did not find any regression
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In a librairies network, we would like to declare specific values just
for one (or more) library.
Here we implement the ability to associate categories, patron attributes
types and/or authorised_values with librairies (branches).
This patch adds 3 new association tables:
- categories_branches ( association table between categories and branches )
- authorised_values_branches ( association table between
authorised_values and branches )
- borrower_attribute_types_branches (association table between
borrower_attribute_types and branches )
Plan test:
- Create (or modify) categories, patron attributes and
authorised_values and link it with one (or more) library.
- Set one of these librairies
- Go to one of the multiple pages where this specific value must be displayed
and check that it does appear.
- Set a library not concerned.
- Check on the same pages this value is doest not appear.
A page list:
cataloguing/addbiblio.pl
cataloguing/additems.pl
members/members-home.pl
members/memberentry.pl
acqui/neworderempty.pl
tools/modborrowers.pl
and others :)
Please say me if filters don't work on some pages.
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
It works: (1) merging's still effective, and (2) two new error messages appear
in staff .po file after update it.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Some Z39.50 server may use the MARC-8 encoding, which uses separated
diacritics. By forcing a normalization, all imported records will have
combined diacritics.
Records with separated diacritics might not show up in Zebra searches if
the search terms use accented characters.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
http://bugs.koha-community.org/show_bug.cgi?id=8610
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
checked it still works after the patch with UNIMARC and BNF server (that
provide utf-8 records)
Bugzilla description (from delaye):
1 / Create a list of authorised values(INVENTORY_NUMBER). In which the
code is the prefix and the description the last number assigned.
2/A space between the prefix and number.
3 / From a holding record, after indicate the prefix when you click on
the plugin -> koha search the last number from authorised values
assigned in the list and increment n +1 level meter
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works as advertised (see provisos below). Tested the following:
1) INVENTORY category has only authorised value 'PR' => PR prefix filled
in, everything else gives an error.
2) INVENTORY category has two authorised values, both work.
3) INVENTORY category has no authorised values, nothing is incremented
4) Barcode contains numbers, nothing is changed.
Two potential gotchas (neither of them significant enough to warrant
changing, in my opinion):
1) Prefixes must consist only of uppercase alphabetical characters.
2) Negative numbers are padded with zeros to the left of the negative
sign.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If countitems not set to 1 it was not being declared
but is referred to outside this scope, generating
runtime warnings and test failure
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This plugin works like the unimarc plugin unimarc_field_4XX. It
insert: $9 -> biblionumber $w -> 001 $t -> 245$a (title )
$x -> 022$a (ISSN) $z -> 020$a (ISBN) The search is done on
'any' index. Data are inserted only in the working record.
To insert data in the connected record, you need to open
the other record.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Pre-filling of items: remember what was in the previous item filled, to be able to create multiple items quickly.
By default, all subfields are prefilled when the PrefillItem syspref is on, unless you specify which fields
you want to prefill in the SubfieldsToUseWhenPrefill syspref.
With a value of "f u v", only the $f, $u and $v will be prefilled, for example.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Rebased and QAed.
Rather than treating ISBN and ISSN as the same, this patch breaks
them out into separate parts of the query, as well as changing
the truncation attribute to enable right truncation (the correct
behavior for the ISBN field in MARC21, and valid behavior in
UNIMARC).
Signed-off-by: Joseph Alway <jbalway@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
In addition to adding a new barcode plugin, this commit begins
refactoring the barcode generation code using a new module,
C4::Barcodes::ValueBuilder. From the POD:
This module is intended as a shim to ease the eventual transition
from having all barcode-related code in the value builder plugin
barcode.pl file to using C4::Barcodes. Since the shift will require
a rather significant amount of refactoring, this module will return
value builder-formatted results, at first by merely running the
code that was formerly in the barcodes.pl value builder, but later
by using C4::Barcodes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Implement auto-incrementing EAN-13 barcodes
To make this work, C4::Barcodes::next was modified to call process_tail with
new incremented value so that process_tail can generate correct checksum.
Since process_tail is currenlty not used by any barcodes, this change is safe.
C4::Barcodes is used by addbiblio.pl when adding multiple records, while value_builder
is used in all other cases.
Test scenario:
1. prove t/Barcodes_EAN13.t
2. KOHA_CONF=/etc/koha/sites/fer/koha-conf.xml prove t/db_dependent/Barcodes.t
this will check C4::Barcode implementataion
3. in systempreference change autoBarcode to incremental EAN-13 barcode
4. edit two items of any biblio assigning barcodes and verify that numbers
are increasing. Have in mind that last digit is check digit, and it
doesn't increment, but is calculated from barcode itself. Example with
checksum in brackets: 000000086275[2], 000000086276[9], 000000086277[6]
5. Add Item and verify that it gets assigned next barcode
6. Add & Duplicate item and verify barcode increase
7. Add Multiple Copies and verify that barcode increase for each copy
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Solves software error when editing items for record with invalid
analytic.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
A logic bug in the original code adding DefaultClassificationSource
caused the default not to be used (the last used value was used instead)
The bug was fixed in additem by bug 2398 but addbiblio's use
of the code was not fixed.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
$dbh needs our scoping when using "Add item" to prevent error
Can't call method "prepare" on an undefined value at /srv/koha/cataloguing/additem.pl line 88.
Test scenario:
1. start intranet with plack
2. select one Edit items on one record
3. fill in new item and click on "Add item"
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The HTML for authority search results was previously generated in
C4::AuthoritiesMarc::BuildSummary, which meant that it couldn't be
translated. This patch moves the HTML generation into the templates
by introducing a new authorities-search-results.inc include file for
both the OPAC and the Intranet which contains a Template::Toolkit BLOCK
for rendering the authority results. Fixes the authority autocomplete
by removing the untranslatable strings, and returning only data from
the database.
To test:
1. Apply patch.
2. Test authority searching in the authority module in the staff client
3. Test authority searching in the authority control plugin in the
cataloguing module (and the plugin for UNIMARC field 210$c, if you
can figure out how)
4. Test authority searching in the OPAC
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with MARC21 data.
1) Applies cleanly on current HEAD.
2) Authority search in staff
Patch works wonderfully, only some small notes found while testing that have
not been changed by this patch:
ENH note: Search terms show up nowhere. So if I want to change the sorting, I have to
repeat typing in my search term. Even if the form does not keep the term, it
should be visible somewhere on the screen what I searched for.
ENH note: The pagination on top and at the bottom of the result list are formatted
differently. Maybe some missing CSS?
ENH note: Also the authority type is not shown at all in the result list.
3) Cataloguing and authority plugins
The autocomplete function works nicely.
ENH note: There is only one small enhancement
I could imagine. If I start my search from 100 it will limit the search to
'persons' but the autocomplete will also suggest other authorities. It would
be a bit cleaner, if the autocomplete could limit by the appropriate authority
type too. Very nice feature.
Plugins overall work nicely. Created links include the authority numbers and work
correctly.
4) Authority search in OPAC
Works nicely. Display is consistent, but translatability greatly improved.
ENH note: In staff we use 'Details' in OPAC we use 'View full heading' - I wonder
if maybe 'details' would be better understandable for users?
Note: Code reveals a system preference 'AuthDisplayHierarchy' that is
not available in the system preference editor. I talked to Jared and he
will work on this feature later on. For now it's no regression, as the
preference has never been visible.
When a new marc record is added, the language code in field 008 Range 35-37 defaults to Englih ("eng"). This makes cataloguing inefficient and error-prone for librarians if most of the bibliographic data is e.g. in German or in French.
Test:
- Apply patch
- Edit preference DefaultLanguageField008, fill in e.g. 'ger'
- Go to Cataloguing, Add marc Record
- Click in field 008. Language code should read 'ger' (instead of 'eng')
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patch modifies the permissions required to access the cataloging
home page (addbooks.pl) so that the user requires edit_catalogue,
edit_items, or fast_cataloging permission.
Users with only edit_catalogue permission will only see biblio edit
links. Users with edit_items permission will only see item edit
links. Users with fast_cataloging permission will only be able to
view information about contents of the catalog--useless for them
but I'm not sure how better to handle it.
To test, log in as a user with each of the above permissions
enabled separately and in combination and test access.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
If AcqCreateItem=ordering, when you receive an order, you now have a
list of all created items and checkboxes that permit you to choose which
items you want to receive.
A 'Edit' link open additem.pl page in a popup to allow you edit the
items before receiving them (popup is automatically closed after
modification, and items table is automatically updated)
If quantity is set manually in the text box, the appropriate number of
checkbox are checked from top to bottom and a warning shows up if
quantity is greater than order quantity
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Simple fix, a special case was added for the fast add framework
in the case that an item was being checked out that had not been
catalogued. In that case, the barcode was being passed as a parameter
through addbiblio.pl to additem.pl.
This barcode param was used to overwrite the existing value, so if
no barcode param was passed ( which is only the case with fast adds
from the circ screen ), the barcode field would appear empty in the
items editor.
This commit causes that special case code to check for an existing
barcode value first, and only use the cgi parameter 'branch' in the
case that there is no existing barcode value.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Editing barcode of fast added item now works. Passes t xt
Recommend this for 3.6 release.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
1/ It now works with neworderempty.pl
2/ The set_to_today function was moved from
additem.tt to dateaccessioned.pl (so it's
available to all pages using the plugin)
Signed-off-by: Julien Sicot <julien.sicot@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
1) Removes unused subroutine get_host_control_num
2) Fixes small mistake, correct subfield for ISBN 020 is z
3) Checks system preference for correct marcflavour instead of
assuming MARC21
4) Fixes MARC21 to not use author(), because it would also add
fields like $w and $0 to 773$a
5) Fixes MARC21 to not use title(), but 245$a, because it would
also add too many subfields.
6) Adds definitions for UNIMARC and includes NORMARC
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works properly with all supported MARC flavours.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Simplifies the adding of analytical records and ensures that
the data populating the 773 tag is correct. From the host record
add child record is selected and create bib is entered to generate
a new record with host item tag populated from the parent
Caveat: currently prepare_host_field only returns a field for
MARC21. Values for UNIMARC and NORMARC can easily be added but
should be done by someone familar with those formats
and conventions
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
To test:
- create a new record
--> if you enter a value in 001 anaytics will use that in $w for linking later
--> if you set 000/LDR 19 - Multipart resource record level to 'a' there will
be a link from the parent record to the child record later
- save your record and go to the staff detail page
- in toolbar select 'New' > 'New child record'
- check field 773, 245 and 001 from the parent record should have been copied there
- check links between child and parent in staff
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts in all 3 files.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works properly for MARC21, and follow-up adds support for NORMARC and UNIMARC.
While typing an authority, will automatically propose authorities (similar to
autocompletion for patron search if activated)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tested searching for authorities with and without autocomplete. Note that
this is most useful when used in the "Main entry" box instead of the
"Main entry ($a only)" box.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Corrected tabs to spaces in auth-finder-search.inc while resolving merge
conflict.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
