Branch transfer limits are respected for placing holds in the OPAC but nowhere else. This should be remedied.
Test Plan:
1) Set up a branch transfer limit from Library A to Library B
2) Verify you cannot set up a hold for an item from Library A for pickup at Library B from the staff interface ( without overriding )
3) Verify you cannot place that hold via ILS-DI
4) Verify you cannot place that hold via SIP
4) Verify a forced hold from Library A to Library B will not show up in the holds queue
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new Koha::Hold->cancel method and replaces the calls
to C4::Reserves::CancelReserve with it.
Test plan:
- Add and cancel holds
- Change priority of holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Replaces TRUNCATE by DELETE, since truncate implicitly commits. We don't
need to do that here. (Would complicate testing it too.)
Fixes typo disablig.
Add a simple test to HoldsQueue.t.
Test plan:
Run t/db_dependent/HoldsQueue.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Two discussions on koha-devel lead to the same conclusion:
biblioitems.marcxml should be moved out this table
- biblio and biblioitems
http://lists.koha-community.org/pipermail/koha-devel/2013-April/039239.html
- biblioitems.marcxml & biblioitems.marc / HUGE performance issue !
http://lists.koha-community.org/pipermail/koha-devel/2016-July/042821.html
There are several goals to do it:
- Performance
As Paul Poulain wrote, a simple query like
SELECT publicationyear, count(publicationyear) FROM biblioitems GROUP BY publicationyear;
takes more than 10min on a DB with more than 1M bibliographic records
but only 3sec (!) on the same DB without the biblioitems.marcxml field
Note that priori to this patch set, the biblioitems.marcxml was not
retrieved systematically, but was, at least, in
C4::Acquisition::GetOrdersByBiblionumber and C4::Acquisition::GetOrders
- Flexibility
Storing the marcxml in a specific table would allow use to store several
kind of metadata (USMARC, MARCXML, MIJ, etc.) and different formats (marcflavour)
- Clean code
It would be a first step toward Koha::MetadataRecord for bibliographic
records (not done in this patch set).
Test plan:
- Update the DBIC Schema
- Add / Edit / Delete / Import / Export bibliographic records
- Add items
- Reindex records using ES
- Confirm that the following scripts still work:
* misc/cronjobs/delete_records_via_leader.pl
* misc/migration_tools/build_oai_sets.pl
- Look at the reading history at the OPAC (opac-readingrecord.pl)
- At the OPAC, click on a tag, you must see the result
Note: Changes in Koha/OAI/Server/ListRecords.pm is planned on bug 15108.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If memcached is running, the pref's value will be set in cache, what we
do not want.
t/db_dependent/Context.t and t/db_dependent/sysprefs.t are exceptions
for obvious reasons.
Test plan:
Make sure all these tests still pass
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It appears that the LocalHoldsPriority feature and the Holds Queue are
fundamentally at odds with each other.
The problem appears to be that both are attempting to choose the best
way to fill holds. When you are using the holds queue and you check in
an item that has been selected by the holds queue builder, that part of
Koha where the LocalHoldsPriority feature lives doesn't get to see all
the holds in order to pick the best one. Instead only the hold selected
by the holds queue builder is returned so to the LocalHoldsPriority
feature, that is only one hold to pick from!
Test Plan:
1) Apply this patch
2) prove t/db_dependent/HoldsQueue.t
3) All tests should pass
Signed-off-by: Barton Chittenden barton@bywatersolutions.com
Signed-off-by: Dani Elder <dani@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Instead of relying on existing data, we use new TestBuilder recs.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No need to bail out, if we are using TestBuilder.
Somehow, this test passes with me if we add a new record, and if
we do not, it fails (using BK as the first itemtype with notforloan
is 0).
Looking further, we should imo remove the Koha::ItemTypes searches
here and not depend on existing data. Just add some item types.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Looking at commit aafe73eefb
Bug 14828: Use Koha::ItemType[s] everywhere C4::ItemType was used
-my @item_types = C4::ItemType->all;
-my @for_loan = grep { $_->{notforloan} == 0 } @item_types
- or BAIL_OUT("No adequate itemtype");
-my $itemtype = $for_loan[0]->{itemtype};
+my $itemtype = Koha::ItemTypes->search({ notforloan => 1 })->next;
+$itemtype or BAIL_OUT("No adequate itemtype"); #FIXME Should be $itemtype = $itemtype->itemtype
It seems that the tests expect itemtypes for loan.
Test plan:
prove t/db_dependent/HoldsQueue.t
should still return green
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. No qa test tool errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adding follow-up.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like the ability to select the itemtype to request
when placing holds. For example, if a record has 3 copies of BookA and 3
copies of BookA in large print, this feature would allow a person to
place a hold on the record, but still be able to target only the Large
Print edition so that the first Large Print copy that becomes available
is targeted, rather than forcing the patron to select a particular copy
to hold.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with items of two or more itemtypes
4) Place a record level hold on the record while choosing one particular
itemtype
5) Check in an item from the record that is not of that itemtype
6) Notee it is not trapped for the hold
7) Check in an item from the record that does match the selected itemtype
8) Note the item is trapped for the hold
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to be able to limit hold filling to items that
match the pickup library for a hold based on the item's home or holding
library. The patron's home library should not affect whether a patron
can place the hold, instead the hold will only be fillable when an item
matching the pickup location becomes available.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the new "Hold pickup library match" rules for "checkout, hold,
and return policy" and for "holds policy by item type"
4) Set the policy to "item's holding library"
5) Place a hold where the item's holding branch does not match
the pickup branch
6) Check in the item
7) Note it is not trapped for the hold
8) Update the item's holding branch to match the pickup branch
8) Check in the item
9) Note the item is trapped for the hold
10) Repeat steps 4-9 but for home branch instead
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch should not be the way to make these tests pass.
The prefs should not be updated using set_preference, it will modify the
values in the cache.
I have no idea how to make them pass using the correct way, please help
:)
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Unless in t/db_dependent/Context.t where we want to test the cache
behaviors.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 12803 [QA Followup] - Remove use of C4::Dates
C4::Dates was being included, but not used in the code!
Bug 12803 [QA Followup] - Fix koha-qa.pl errors
Bug 12803 [QA Followup] - Update unit tests due to changes in master
Bug 12803 [QA Followup] - Fix to stop failing unit tests
Bug 12803 [QA Followup] - Remove duplicate 'use' lines
Bug 12803 [QA Followup] - Remove NO_CACHE
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The holds queue is typically generated many times a day in order to
select items to fill holds. Often these items are to be sent to a
different library. However, if the library whose item is picked to fill
a hold is closed, that hold will remain unfilled even if there are other
open libraries who own that item. It would be helpful if we could skip
closed libraries for the purpose of selecting items to fill holds.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with two items on it, one at Branch A, and one at
Branch B
4) Place a hold for pickup at Branch C
5) Generate the holds queue
6) Note which branch's item is selected for the hold
7) Enable the new system preference HoldsQueueSkipClosed
8) Add today as a holiday for that branch noted in step 6
9) Regenerate the holds queue
10) View the holds queue, notice the item selected is not from
the closed branch!
11) prove t/db_dependent/HoldsQueue.t
Signed-off by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch mainly replaces C4::ItemType->all with
Koha::ItemTypes->search.
Test plan:
At the places where the C4::ItemType module was used, confirm there is
no regression:
- acqui/neworderempty.pl
- catalogue/itemsearch.pl
- admin/item_circulation_alerts.pl
and the 2 cataloguing plugins:
- marc21_linking_section.pl
- unimarc_field_4XX.pl
QA step:
prove t/db_dependent/HoldsQueue.t should return green
Note that the tests were buggy.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Prior to this patch, in HoldsQueue.t:
63 my @item_types = C4::ItemType->all;
64 my $itemtype = grep { $_->{notforloan} == 1 } @item_types
65 or BAIL_OUT("No adequate itemtype");
Then we use the $itemtype variable (which contains the number of item types not for loan):
92 $dbh->do("INSERT INTO biblioitems (biblionumber, marcxml, itemtype)
93 VALUES ($biblionumber, '', '$itemtype')");
There is obviously something wrong here.
The code should be
64 my @not_for_loan = grep { $_->{notforloan} == 1 } @item_types
65 or BAIL_OUT("No adequate itemtype");
66 my $itemtype = $not_for_loan[0]->{itemtype};
But then some tests don't pass:
Actually the problem comes from:
commit bfbc646fdd
Bug 10336: HoldsQueue.t needs to create its own data
-my $itemtype = $dbh->selectrow_array("SELECT min(itemtype) FROM itemtypes WHERE notforloan = 0")
+my @item_types = C4::ItemType->all;
+my $itemtype = grep { $_->{notforloan} == 1 } @item_types
The line should have been:
my $itemtype = grep { $_->{notforloan} == 0 } @item_types
Test plan:
Confirm that the tests still pass after this patch applied.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
All tests pass pre and post patch
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Tests assume that the branchcodes CPL/MPL/etc. already exist in the DB.
If they need them, they should create them.
Test plan:
Execute the differente test files on a DB without any branchcode or
at least without CPL/MPL branches.
Confirm that the tests pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes a problem where the holds queue generator
was making requests where the pickup library is the
same as the item's library but not the patron's branch,
even if there is a "Default holds policy by item type" rule that states
this item can only fill holds for patrons of the same library as the
item.
Test Plan:
1) Create a test record with 2 items with different itemtypes
2) Set the Default holds policy by item type for the first
item to "From any library"
3) Set the Default holds policy by item type for the second
item to "From home library"
4) Place a record level hold for a patron from another library,
but for pickup at the same library as the item is from
5) Rebuild the holds queue
6) View the holds queue, note the item is listed, though this
patron cannot place a hold on this item
7) Apply this patch
8) Repeat step 5, note the hold is no longer in the queue
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
automated tests pass, functional tests pass. Bug replicated, eradicated by patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I finally managed to reproduce this, patch works as described.
Passes tests and QA script, provided tests fail without patch, but
succeed with the patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
For some reason, C4::HoldsQueue::MapItemsToHoldRequests used the system
preference AutomaticItemReturn to decide if an attempt to fill local
holds with local items. No explanation of this behavior is provided.
This patch removes this behavior, and also adjusts the calculation
of the lead-cost library to always return the pickup library if it
is on the list of libraries that could fill the hold -- on the
basis that if the item is already at the pickup library, its
transport cost is inherently zero.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and adds unit tests.
Tested with some examples and those worked correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
After applying this patch and the patch submitted in bug 10495, you can
run prove t/db_dependent/HoldsQueue.t and admire that all tests pass.
This patch creates a borrower and uses Koha routines instead of directly
updating the database.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
t/db_dependent/HoldsQueue.t assumed, but did not check,
that the AutomaticItemReturns system preference was off
at the beginning of the test un. This patch makes sure
that that assumption is met.
To test:
[1] Make sure that at least one item is on loan (this is
another assumption that the test case makes, one
that should be corrected with the work proposed
for bug 10336.
[2] Turn the AutomaticItemReturn system preference on.
[3] Run the test:
prove -v t/db_dependent/HoldsQueue.t
[4] Tests 4 and 6 should fail.
[5] Apply the patch.
[6] Run the test case again; this time, all tests should pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Create transport_cost table, added UseTransportCostMatrix syspref.
transport_cost table contains branch to branch transfer
costs. These are used for filling inter-branch hold transfers.
Moved GetHoldsQueueItems() from .pl to HoldsQueue.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
