The work from KnowledgeWare Technologies need to be
added to about page.
To test:
1) Apply the patch
2) Go to About page > Translations
3) Credits for Arabic must show updated information
(agreed between involved parties)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
They all agreed on the attribution.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Whenever a librarian is prompted with a form during the checking process
( hold to fill, transfer, etc ) the date to backdate returns to is forgotten!
Test Plan:
1) Begin returning items with a remembered backdate
2) Check in an item that need transfered or has a hold
3) Complete the action requested
4) Note your set return date is now lost
5) Apply this patch
6) Repeat steps 1-3
7) Note your backdate is now remembered!
Signed-off-by: Sean McGarvey <smcgarvey@pascocountyfl.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The "Override renewal limit" checkbox no longer works to un-hide the
renewal checkboxes in the table of checkouts. I assume this is because
the script works in such a way that it is looking for the checkboxes
before they are part of the document.
Test Plan:
1) Apply this patch
2) Check the "Override renewal limit" checkbox
3) Note the checkbox now appears
Note, this change allows the "X of Y renewals remaining" to be displayed
for non-renewable items. I left this as it is for two reasons: 1) it
gives the librarian more information that may be useful, and 2) it looks
nicer and more uniform.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm the bug and the solution.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, works as described.
Exception: on-site checkouts can't be renewed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Titles with diacritics don't show correctly
on the 'pay fines' page in the patron account
in staff.
To test:
- Catalog or find a record with non-latin script
Something like a word in Hebrew would work.
- Create a fine entry for that record
Something like a rental fee works.
- Verify that the title doesn't display correct
on the pay fine page (other tabs are ok)
- Apply patch
- Check the pages again - display should be
correct now.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When an item is renewed from the checkouts table, the new due date is
displayed in the renewal column, but the old date due is still displayed
in the due date column. This should be updated as well.
Test Plan:
1) Apply this patch
2) Renew an item from the checkouts table
3) Note the date due is updated in the "Due date" column
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works well in my test. My librarians will be grateful for the fix
-- they were complaining about this bug.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When you search for serials in the Serials module the results table is
often too wide for the screen (depending on your browser window size).
This is partly due to the fixed width of the search fields in the table
footer.
This patch applies a flexible width to those <input>s and reduces the
font size of their text.
This patch also moves the "action" links for each table row into an
"action" menu (similar to the change made by Bug 10615 in Reports) to
further conserve screen space.
This patch also revises the page's DataTables configuration to use table
header classes for sorting configuration.
To test you should be able to perform a search which returns multiple
open and closed subscriptions.
- Test that table sorting works correctly, including for titles with
articles and for dates.
- Test that the Action menu items work correctly and that they correctly
reflect the permissions of the logged-in user with regard to
receive_serials and routing.
- Perform these tests on both the "Open" and "Closed" tabs.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely and improves the display significantly.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 2546 removes the description DB field value in some case (3.15.00.003).
But the receipt generated by scripts members/printfeercpt.pl and
members/printinvoice.pl displays this field.
When the description field is empty, the default value (based on
accountlines.accounttype) should be displayed.
Test plan:
- Generate and pay some different kinds of fees for a patron without
filling the 'description' field.
- In Fines>Account, click on the 'print' link.
- Before this patch, the "description of charges" values is empty if no
description was given.
It is a regression introduced by bug 2546, a default value was
inserted in the description field depending on the account type
selected.
- After this patch, the "description of charges" values should be based
on the account type. The string display on printing receipt should be
the same as on the account screen (staff and opac).
Note for QA: If removed the "payment" key, it is not used in template
and generated a warning ("odd number of elements...").
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This fixes the display of payments and other charges on the
fines slip.
Note: This patch fixes a line where the description in the
database was still updated to say "Payment thanks" for partial
payments. It might be worth to do a follow-up correcting the
accountlines table and removing the unwanted comment (see bug 2546).
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The label batches editor has always sorted by the order the items were
added to a batch. However, it is now sorting by title. This should be
remedied.
Test Plan:
1) Create a label batch
2) Note the items are in order of title ( summary )
3) Apply this patch
4) Refresh the page, not the items are now sorted by label number
Tiny patch. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The checkbox and "edit" column in the table of holdings on the
staff client detail page should be excluded from sorting since there is
no useful data to sort. This patch does so.
To test, view the detail page for a title which has multiple items.
Confirm that sorting works correctly.
Test under the following conditions:
- with the StaffDetailItemSelection system preference enabled and
disabled.
- as users who do and do not have cataloging item edit privileges
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as desrcibed, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When adding a duplicated patron record some fields are prepopulated from
the original patron record. Focusing your cursor on these fields
automatically clears them. This works well if you assume that the user
only focuses on fields which should be changed. This works badly if you
consider that a user might want to tab between all fields. I think the
disadvantages outweigh the minor benefit of not having to delete the
contents of a field.
This patch removes the clearing action.
TEST PLAN
---------
1) Log in to staff client
2) Patrons
3) Find an existing patron
4) Click on the link in the Name column
5) Click on the Duplicate button
6) Click on fields with data in them.
-- they will clear, which is more problematic than correcting
the entry.
7) On the line
"Home > Patrons > {patron name} > Duplicate Adult Patron"
click the patron name to go back.
8) Click on the Duplicate button
9) Tab through the fields
-- the fields should remain unchanged, but sadly they clear.
10) Apply the patch
11) On the line
"Home > Patrons > {patron name} > Duplicate Adult Patron"
click the patron name to go back.
12) Click on the Duplicate button
13) Navigate through the fields
-- tabbing nor clicking should clear any fields.
14) Run koha qa tests
NOTE: Had to rebase again. Yes, bug 7878 interfered.
However, it deals with comment #6, which Owen
appropriately noted.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Less surprises, improves accessibility by enabling to
tab through the form without losing data.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch to follow that adds 3 new system preferences to control the
parameters for the longoverdue script.
New prefs are DefaultLongOverdueChargeValue, DefaultLongOverdueLostValue
and DefaultLongOverdueDays.
These preferences are used when you call the longoverdue.pl script without
their parameters.
Sponsored-By: CCSR
Signed-off-by: Leila and Fridos help <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently only the suggestion manager can order from accepted
suggestion.
This patch set to default the ability to show all suggestions when
ordering from a suggestion.
2 links "show only mine" and "show all" permits to filter/show all
permissions.
Test plan:
Create an order from a suggestion and verify you are able to see all
suggestions by default.
Verify the "show only mine" link works as expected.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For some libraries, the current information specified in the patron
results when search for a patron to place hold is insufficient. These
libraries would like the branchcode to be added to the results to help
identify the correct patron.
Test Plan:
1) Apply this patch
2) Browse to the holds for a record
3) Search for patrons from the record holds screen
4) Note the patron results now have the branchcode after the patron type
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I introduced this bug with my patch for Bug 8181. In changing the way
the date picker widgets worked I changed the ID the "clear date"
javascript was looking for, so it stopped working.
This patch corrects it and improves the JavaScript by moving it out of
the HTML markup.
This patch also makes some minor HTML validity corrections: escaping
ampersands and removing a "size" attribute from a hidden form field.
To test, you should have the AllowHoldDateInFuture system preference
enabled. Place a hold in the staff client for a patron and confirm that
you can choose a "hold starts on" date and a "hold expires on" date and
that the respective "clear date" links work correctly for each one.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Both of these 2 values should not be modified by the user.
Since these values depend on the discount and the quantity.
Test plan:
Verify you cannot modify the budgeted cost and the total price on
creating/modifying an order.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In inventory results, CSV or screen, the item withdrawn information is missing.
This information can be usefull to understand why an item was not scanned.
Test plan :
- Check you have in default framework an item subfield mapped with items.withdrawn
- Create a biblio with default framework
- Create an item with barcode='000AAA1', callnumber='ZZZAAA1' and withdrawn=0
- Create an item with barcode='000AAA2', callnumber='ZZZAAA2' and withdrawn=1
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Submit
=> You see a column 'Withdrawn' with withdrawn value
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Check 'Export to CSV file'
- Submit
- Open exported file
=> You see a column 'Withdrawn' with withdrawn value
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce this bug:
- Create a patron attribute type and limit it by patron category
- Create a new patron with that category
- Observe that there is no entry field for the patron attribute type you
created for that patron category. Inspecting the source should show
that the entry field has been hidden.
The patron entry form tries to hide patron attribute type input fields
based on the currently selected patron category. It does this based on
the value of $("categorycode"). However, instead of pulling the data
from the categorycode input in the body of the entry form, it pulls it
from the patron search box at the top of the page. The value of that
input is always empty because no category is preselected.
This patch corrects the problem by changing the ID of the categorycode
<select> in the body of the entry form and making corresponding changes
to the JavaScript which depends on it.
To test, apply the patch and load the patron entry form for a patron
category to which a patron attribute type has been limited. That patron
attribute entry field should appear correctly.
Choose a different patron category from the "Category" dropdown. Confirm
that the patron attribute entry field has been hidden.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch modifies the configuration of the staff client cart table
sorting to enable title sorting to ignore articles. Other column sorting
configuration settings are revised to use table header classes instead
of indexes.
To test, add multiple titles to the staff client cart, choosing several
titles which begin with articles ("a," "an," or "the" in English). View
the cart and test sorting of all columns. Sorting by title should sort
correctly while ignoring articles. Other columns should sort correctly
too.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The MARC preview available on the staff client detail page doesn't wrap
long lines of text because it uses a huge block of whitespace-formatted
text in a <pre> tag. The OPAC doesn't have this problem because the MARC
preview is formated in a table.
This patch copies the OPAC's "plainMARC.xsl" file for use in the staff
client. The preview modal has been converted to use Bootstrap following
the method used in Bug 12755
To test, apply the patch and clear your browser cache. View the
detail page for a bibliographic record in the staff client. Click the
link to show the MARC preview. Confirm that the modal looks correct,
works correctly, and adapts gracefully to different browser widths.
Confirm that the MARC preview and Card links still work from Z39.50
searches.
Note: This patch assumes that UNIMARC records display correctly using
xslt/plainMARC.xsl. Please let me know if that is wrong.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm it works: nice modal dialog box; display aligned on opac display;
works also with Unimarc biblios.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In the template of the export tools, the value 'marc' is set for
the 'format' variable.
It should be 'iso2709'.
There was a mess in the tools/export.pl script.
2 variables did the same thing: $format and $output_format
This patch fixes that replacing $format with $output_format
Test plan:
Try to export biblio in iso2709 and csv using the export tools and from
the checkout list.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Before applying the patch, attemping an MARC export from tools/export.pl
resulted in an error. After the patch the export works correctly.
Exports from the checkouts page also work correctly.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script. Also tested authority export.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The suggestion date filters appear to be picking up a style change which
wasn't anticipated for the suggestions page markup. This patch solves
the problem by simplifying and standardizing the markup, including
simplifications to the label structure.
To test, apply the patch and view the suggestions management page in the
staff client. Expand the "suggestion information" filter section and
confirm that the label/input structure looks correct and works
correctly.
Signed-off-by: Blou <philippe.blouin@inlibro.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, looking better.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since bug 12986 has been pushed, the tabs don't filter correctly the
table on the saved report list (reports/guided_reports.pl?phase=Use
saved
Test plan:
Go on Reports > Guided reports wizard > Saved reports
Verify the tabs work as expected.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed problem and that the patch fixes it, passes tests
and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without the previous patch, when you edited a patron, the "N/A" value
was selected for sex.
With, no checkboxes were selected.
This patch also replaces the
IF opduplicate do nothing ELSE do something END
statement with
UNLESS opduplicate do something END
which is more readable.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When duplicating a patron the resulting entry form contains the data
from the original patron in the following fields: Other names, Initials,
Gender, OPAC note, Staff note, and expiration date. These should be
blank for a new duplicated patron. This patch corrects this.
To test, locate or create a patron record which contains data in the
fields listed above. Duplicate that patron and confirm that those fields
are blank in the resulting patron entry form.
Confirm also that editing an existing patron with data in those fields
works correctly.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If no order is selected on the acq claim page when clicking
'Claim order' an ugly perl error message is displayed.
This patch corrects the behaviour to display a human readable
'No order selected'
instead.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reworded commit message to reflect what the patch achieves.
Works as described and passes tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the budget name to the page heading when editing a
budget. The patch also similarly corrects the page title during edit
operations and fixes some inconsistency in the breadcrumbs.
To test, edit an existing budget (Adminitration -> Budgets) and confirm
that page title, breadcrumbs, and heading look correct.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Nice improvement, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a better check in message for patrons with indefinite restriction.
To test:
Check out an item to a patron.
Add a manual restriction without expiry date to that patron.
Check in the item.
Without patch, the checkin message reads:
Reminder: Patron was earlier restricted until 9999-12-31
Apply patch and repeat steps above.
The message should now read:
Reminder: Patron has a restriction (no expiry date)
NOTE: Changed wording at two places following Owen's suggestion. New: "Patron
has an indefinite restriction"
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Thanks Marc for catching this case. I was thinking like you that the wording
sounded strange while playing with bug 13242. Merge the original patch and the
followup, containing a better wording, thanks to Owen comment.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The document.write in a td seems to brake the page with a new version of
DataTables.
This patch replaces a dirty piece of code with another one (but this one
works...)
Test plan:
Create repeatable holidays and verify the page loads correctly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Works to fix the problem. The code is definitely an improvement.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, fixes critical problem.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked the names with git log and Bugzilla.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the vendor search results page if some cells contain textual data the
"item count" and "biblio count" columns will sort incorrectly. This
patch sets an explicit numeric sort on these columns. In doing so this
patch also changes the existing column sorting configuration to use
table header cell classes instead of sorting based on index.
This patch also corrects two instances of unescaped ampersands.
To test, search for a vendor which has multiple baskets, at least one of
which should contain canceled orders. Confirm that sorting by item
count, biblio count, date, and closed all work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have not been able to see the sorting problem, but the
patch causes no regression and everything seems to work nicely.
Passes QA script and tests.
http://bugs.koha-community.org/show_bug.cgi?id=12039
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch slightly alters the padding on <input> and <textarea> so that
the cursor is more visible.
To test, apply the patch and clear your browser cache. View a variety of
pages in the staff client and confirm that the change does not adversely
affect the display of forms.
Small change that enhances user experience.
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, small CSS change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Makes the status column display "Overdue!" if overdue
* Fixes the due date formatting
* Sorts the checkouts by date due ( oldest to newest )
Note: I found no evidence that this data was previously sorted,
so I kept it simple. Sorting based on system preferences could
be a future enhancement.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This fixes the issues described for patrons with existing checkouts.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A patron's print summary should contain a list of checked out items
as it did in 3.16.2 and earlier.
Please note, as of 3.16.2 reserves were no longer part of the print
summary and thus are not part of this bug fixing patch.
Test Plan:
1) Find a patron with checked out items
2) Choose Print -> Print summary
3) Note the lack of a list of checkouts
4) Apply this patch
5) Reload the page
5) Print the summary again
6) Note the list of checkouts
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, apart from the missing status information
that Owen already noted on the bug.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The 'show_actual' variable is not correctly manage in the template.
This has certainly been introduced by the migration to TT.
Test plan:
1/ Go on a bugdet planning view (admin/aqplan.pl)
2/ Check the "Show actual/estimated values" checkbox on the left
(Filters box)
3/ Go
4/ Verify the actual values are now displayed (i.e. the columns contain
2 values).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Another regression caused by Bug 11703: The list of checkouts on the
circulation and patron detail page shows item type codes instead of the
full description.
Test Plan:
1) View a patron's checkouts, note the Item type column displays the
code rather than the description.
2) Apply this patch
3) Refresh the page, note the description is now displayed
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Works as described.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Before Bug 11703, overdue items in the list of a patrons checkouts had
the renewal checkbox preselected so that librarians could quickly renew
only those items which required it. This is not longer the case.
This patch corrects it. To test, apply the patch and clear your browser
cache. Check out to a patron who has overdues and confirm that the
overdue items have the "renew" checkbox preselected. Check that items
which are not overdue are not preselected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch modifies the way the checkouts script sets the "Always show
checkouts" cookie so that it is set with an explicit expiration date
(+365 days). This will allow the cookie to persist across browser
sesssions.
To test, apply the patch and clear your browser cookies to start with a
clean slate.
- Check out to a patron who has existing checkouts. Their checkouts
should not load by default.
- Check the "Always show checkouts immediately" checkbox.
- Close your browser.
- Reopen your browser and check out to that patron again. Checkouts
should now be displayed by default.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Works as described. I confirm that without this patch, the un-persistance of
"show checkouts" choice is very perturbing for librarians coming from previous
version of Koha.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In some cases (eg. when Staf Client Search is active), when user choose
Edit->Delete record on record tool bar, browser don't wait for
confirmation and goes immediately to delete record.
To reproduce:
1. Search for some biblio records and choose one without items attached.
2. Note that there, must be "Return to search results" box on left side,
bug works in that case, when in normal view everything work fine.
3. Click Edit->Delete record, watch that confirmation box shows, but
don't wait for OK and runs immediately. If you are fast enough to
click OK, then you get error as below, because record was deleted
earlier.
To test:
1. Apply patch.
2. Follow reproduce steps.
3. Check if waits for confirmation in all cases.
4. Check if deletes record after confirm.
Followed test plan. Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed the problem and that the patch fixes it.
Good catch!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Removes note about Display856uAsImage not working on
the OPAC result page.
To test:
- catalog a record with 856$u = URL to an image, $q = img
- turn on the system preference Display856uAsImage
- check that the pref description makes sense and is correct
- the warning about the pref not working on result pages
has been removed
- make sure your record has been reindexed by Zebra
- verifiy the image indeed displays on the result page
in the bootstrap catalog.
Note: The height=100 doesn't work in the Boostrap catalog,
so the images display in their original size. Will file
a separate bug for this.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch udpates the checkouts JavaScript so that clicking the "show
checkouts" button or the "always show checkouts" checkbox returns focus
to the barcode field. This improves the checkout workflow by eliminating
a mouse click.
To test, apply the patch and clear your browser cache. Check out to a
patron and confirm that focus is returned to the barcode field after
clicking the "show checkouts" button and the "always show checkouts"
checkbox.
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When using the longoverdue script it's possible that items marked lost
remain on the patron account. I think it's important for staff to see
that some items are marked lost - currently the list of checkouts
doesn't show any sign of the lost status.
Test Plan:
1) Find a patron with a checked out lost item
2) Note the lost status is not displayed in the checkouts table
3) Apply this patch
4) Refresh the page, note the lost status now displays
5) Repeat this test plan for a damaged item
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested successfully with damaged and multiple lost values.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In Koha 3.14 and earlier, an item on hold and in transit would display
the date the item was transferred. This is missing from the new ajax
holds table.
Test Plan:
1) Place an item on hold for delivery at a different library
2) Check the item in, confirm the hold and transfer
3) View the patron's holds tab on circulation.pl and/or moremember.pl
4) Note the item is show as in transit, but does not give the "since"
date
5) Apply this patch
6) Note the in transit status now has a "since <date>"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small change, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Typo error found in the new template itemsearch.tt line 363 "_ matches
only a single charcter"
Test plan:
1) Go to url 'intranet-tmpl/prog/en/modules/catalogue/itemsearch.tt'
line 363 and check the typo "_ matches only a single charcter" and
change for _ matches only a single character
2) Apply the patch
3) Repeat step 1 and check if the typo is fixed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When the user selects a patron search by birth date a tooltip is
supposed to appear showing the date format requirement. Bug 9811 (Patron
search improvement) changed the ID on which the tooltip depended to
function. This patch corrects it.
To test, apply the patch and go to the Patrons home page in the staff
client. In the header search form select "Date of birth" from the
"search fields" dropdown. This should trigger a tooltip showing the
required date format.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm the tooltip comeback with this patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As per the discussion, a prompt on a hard coded soft-limit is
far more acceptable as a solution.
TEST PLAN
---------
0) Back up your DB. -- because a backup is always good!
1) Log in to staff client
2) Navigate to any biblio details
(e.g. cgi-bin/koha/catalogue/detail.pl?biblionumber=#####)
3) Click the 'Edit' dropdown button.
4) Click 'Edit items'.
5) Click 'Add multiple items'
6) Enter a crazy high number (e.g. 999)
7) Click 'Add'
-- Koha just adds it! YIKES!
8) Apply patch
9) Repeat steps 5-7
10) Click 'Cancel'
-- Koha does not add the items.
11) Repeat steps 5-7
12) Click 'Ok'
-- Koha does add the items.
13) run koha QA test tools
14) Restore your DB.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
- add/edit an action on the marc modification templates tools
- choose an action and define a condition
- define the source field as same as the condition field
- verify the All/1st dropdown list is changed to Every/1st
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nicole suggested a change of the note, that this patch is implementing:
NOTE: If you change an authorized value code, existing records
using it won't be updated. Changes to value descriptions will show
immediately.
To test:
- Go to administration > authorised values
- Check the note showing on the page
- Select a category from the pull down and edit an existing entry
- Check the note on this page is also correct
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Create or find an open basket/order in the acquisition module
- Check that "Branch" now reads "library"
- Set to "no library"
- No branches should be seen there.
Signed-off-by: jeremie.benarros <jeremie.benarros@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
