If a checkin has any messages at all, even informational like LocalUse, the alert flag ( 4th character of the response ) will be set to Y, even if we do not prove a corresponding alert code in the CV field. We should only set the alert flag if we are going to send a value in the CV field.If a checkin has any messages at all, even informational like LocalUse, the alert flag ( 4th character of the response ) will be set to Y, even if we do not prove a corresponding alert code in the CV field. We should only set the alert flag if we are going to send a value in the CV field.
Test Plan:
1) Set the checked_in_ok sip account flag to 1 for an account
2) Check in an already checked in item via SIP
3) Note the alert flag is set to Y
4) Apply this patch
5) Restart SIP
6) Check the item in again
7) Note the alert flag is set to N
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Only use of $pending was removed in the former patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
AddIssue already checks for holds in the item being issued and deals with them
The sip code, additionally, does not consider that multiple holds per bib
is allowed
To test:
0 - Apply only first patch (unit tests)
1 - Place two holds for a patron on a bib
2 - Checkout that item via sip_cli_emulator
3 - Note all holds are cancelled/filled
4 - prove -v t/db_dependent/SIP/Transaction.t
5 - it fails
6 - Apply second patch
7 - prove tests, all green
8 - Place two holds on a single bib for one patron again
9 - Checkout the item via sip_cli_emulator
10 - Only one holds is filled
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Define a rule to deny renewal
2 - Checkout an item meeting this rule
3 - Attempt renew an item via the OPAC
4 - Attempt renewal via SIP
5 - Attempt renewal via staff client
6 - Verify errors are reasonable
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
and avoid unecessary processing
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Tested and found correct AU data is returned, and passes QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Misspelled variable causes _get_outstanding_holds to crash
if patron is queued on biblio level
Caused by
commit 62a075987a
Bug 21184: Replace C4::Items::GetBarcodeFromItemnumber calls
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetItemnumbersForBiblio can be replaced with
my @itemnumbers = Koha::Items->search({ biblionumber => $biblionumber})->get_column("itemnumber")
Test plan:
- Use the GetAvailability service of ILS-DI
- Try to place a hold on an item that is available and another one
- Use the batch record deletion tool to remove record with and without items.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Set up your SIP: https://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
2) Run:
misc/sip_cli_emulator.pl -a localhost -p 6001 -su <login> -sp <passsword> -l <library_code> --patron <borrowernumber> -s "Y " -m patron_information
the -s parameter says what kind of additional information you want to see
3) Check the response: if the requested patron has waiting hold, there
is field "AS" with the barcode of waiting item
The right response looks like this:
64 00120180817
052434000100000000000000000000AOCPL|AA1|AEKoha Admin|BLY|CC5|AS39999000004410|PCS|PIY|AFGreetings from Koha. |
More reading ;)
http://multimedia.3m.com/mws/media/355361O/sip2-protocol.pdf
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetBarcodeFromItemnumber can be replaced with
my $barcode = Koha::Items->find($itemnumber)->barcode;
But if we are not sure that the item exists, we should test the return
of ->find before ->barcode
Test plan:
- Edit an item
- Check an item in
- Test SIP - I do not really know how to trigger that code, apparently
misc/sip_cli_emulator.pl does not deal with holds. Any ideas?
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Caused by
commit 546379cc92
Bug 17680: C4::Circulation - Remove GetItemIssue, simple calls
Since this commit AddReturn return a Koha::Issue object, not a hashref
with item's info.
Test plan:
1 - Enable SIP server on your test instance
For kohadevbox:
cp /etc/koha/SIPConfig.xml /etc/koha/sites/kohadev/
create patron with user/pass term1/term1 and grant circulation
privileges
2 - enable AutomaticItemReturn
3 - Checkin an item which will generate a transfer via SIP2:
perl /home/vagrant/kohaclone/misc/sip_cli_emulator.pl -a localhost -p
6001 -su term1 -sp term1 -l LPL --item {BARCODE} -m checkin -t
CR
4 - Note no CT field
5 - Apply patch
6 - Repeate checkin via SIP2
7 - Transfer destination is correctly returned in CT
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
No need to check the pref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Many services use SIP patron req info to validate a patron against
the koha database. If recording lastseen sites will
also want to record that the user has accessed these
library facilities although they have not logged into koha
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that Patron Info request (63) updates lastseen when the pref has
been enabled.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sounds like we do not need related fields or 'overdue' flag here.
No idea how to confirm there is no regression here.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Here we are, patronflags is used in a couple of places where (almost) all flags
were really useful: C4::SIP::ILS::Patron->new and circulation.pl
This patch only deal with the circulation code as I am not convident
enough with SIP code.
The change does not seems trivial because of the complexity of the
existing code, but the logic is the same. We send a variable to the
template depending on the situation of the patron.
I guess only code eyes ball could catch issue in this patch quickly.
Maybe we need to find a good place in a Koha module to move this code
and provide code coverage (especially when C4::SIP::ILS::Patron will
reuse it).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries need to be able to send additional patron data from the
extended patron attributes in made up SIP2 fields for the patron
information and patron status responses.
Test Plan:
1) Apply this patch
2) Create 3 new patron attributes with the codes CODE1, CODE2, CODE3.
Make a least one repeatable.
3) Create a patron, add those attibutes for the patron, make sure there
are at least two instances of the repeatable code
4) Edit your SIP2 config file, add the following within the login stanza:
<patron_attribute field="XX" code="CODE1" />
<patron_attribute field="XY" code="CODE2" />
<patron_attribute field="XZ" code="CODE3" />
5) Using the sip cli emulator, run patron_information and
patron_status_request messages for the patron
6) Note the values you set for the patron attributes are sent in the
corrosponding fields!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Daniel Mauchley <dmauchley@duchesne.utah.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: added parentheses on line 488 when assigning hashref to array.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Replaces "or" with "||" in variable assignment
second attempt to retrieve borrower was not being executed due
to changed precedence
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The GetMemberAccountRecords may be a perf killer, it retrieves all the
account lines of a patron and then the related item and biblio
information.
Most of the time we only want to know how much the patron owns to the
library (sum of amountoutstanding). We already have this information in
Koha::Patron->account->balance.
This patch replaces the occurrences of this subroutine by fetching only
the information we need, either the balance, the detail, or both.
It removes the formatting done in the module, to use the TT plugin
'Price' instead.
There is a very weird and error-prone behavior/feature in
GetMemberAccountBalance (FIXME): as the accountlines.accounttype is a
varchar(5), the value of the authorised value used for the
ManInvInNoissuesCharge pref (category MANUAL_INV) is truncated to the 5
first characters. That could lead to unexpected behaviors.
On the way, this patchset also replace the GetMemberAccountBalance
subroutine, which returns the balance, the non issues charges and the
other charges. We only need to have the balance and the non issues
charges to calcul the third one.
Test plan:
Add several fees for a patron and play with HoldsInNoissuesCharge,
RentalsInNoissuesCharge and ManInvInNoissuesCharge.
The information (biblio and item info, as well as the account line) must
be correctly displayed on the different screens: 'Fines' module, fine
slips, circulation module
Note that this patchset could introduce regression on price formatting,
but will be easy to fix using the TT plugin.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Feature using it is completely undocumented as far as my research has
shown.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Benjamin Rokseth <bensinober@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended $item->biblio by $biblio.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some SIP services ( such as Comprise ) require that an attempt at
over-paying a patron's account via SIP2 should fail, rather than create
a credit on the account. We should make this a configurable option on a
per-login basis in the SIP2 config file.
Test Plan:
1) Apply this patch
2) Enable the new parameter
disallow_overpayment="1"
for the login to be used in this test.
3) Restart your SIP server
4) Create or find a patron with fines
5) Attempt to send a payment via SIP for more than what the
patron's balance is
6) Note the response indicates a payment failure
7) Attempt to send a payment via SIP for the account balance or
less
8) Note the response indicates the payment has succeeded
9) Verify in Koha that the payment was processed
Signed-off-by: Rhonda Kuiper <kuiper@roundrocktexas.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new Koha::Hold->cancel method and replaces the calls
to C4::Reserves::CancelReserve with it.
Test plan:
- Add and cancel holds
- Change priority of holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The returns from C4::Circulation::CanBookBeIssued used
to be structured as a hashref of entries like
REASON => {
data => 'foo',
moredata => 'bar',
};
Some entries still are. But many are now
REASON => 1,
data => 'foo',
moredata => 'bar',
The sip Checkout routine still assumed the former, as it
reports any causes it was not aware of (to maintain support for
a changing api) The data fields could leak into the screen message
field of the response. e.g. the borrowernumber or surname of the
borrower who has a hold on an issued title. Some real messages were
getting obscured by this
This patch sanatizes the return from from CanBookBeIssued
by removing keys which are not all uppercase
It also fixes a case where the key's data element was used
for the screen message when we should use the key itself
Updated the documentation of CanBookBeIssued to flag up
the assumption re case and the fact that 3 elements rather
than two may be returned
The loop through the returned keys was a bit bogus
so we now explicitly jump out if noerror is unset
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested quite extensively. Test results put on Bugzilla.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Set 'OverduesBlockCirc' to block
2 - Find or create a patron with overdues
3 - Perform a SIP patron lookup on that patron
misc/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL
--patron {userid or cardnumber} --password {pass} -m patron_information
4 - Note the first character of response is a ' '
5 - Apply patch
6 - Restart memcached, apache, and plack
7 - Perform SIP patron lookup
8 - Note the first character of response is 'Y'
9 - prove t/db_dependent/SIP/Patron.t
10 - Test should return green
Signed-off-by: Chris Kirby <chris.kirby@ilsleypubliclibrary.org>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From the syslog call on line 107/108. The field $item->{title} has not
been initialized. When catching the warns in a test script with Test::Warn,
I got:
Use of uninitialized value $args[1] in sprintf at /usr/lib/x86_64-linux-gnu/perl/5.20/Sys/Syslog.pm line 423.
This simply resolves the warning. We might have a closer look to this title
field on another report though.
Test plan:
Run Message.t from the next patch without this fix. It will fail since the
additional warning makes warnings_like return false.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As per bug 18966 AddReturn returns false with a DataCorrupted message
when the issue_id at hand already occurs in the old_issues table.
This should be handled when returning an item via SIP too. SIP should
not pretend that the checkin was successful, since this item needs
special care.
The following six different situations are handled:
[1] An attempt to checkin an invalid barcode is handled as before. The
ok flag is false; the screen message shows 'Invalid Item'.
[2] We receive a DataCorrupted message: the alert type is set to the
unused 98 code to indicate this new error condition. The ok flag
is false; the screen message shows 'Checkin failed: data problem'.
[3] The item checked in was not checked out AND the option checked_in_ok
is active. The ok flag is set to true; no screen message.
[4] The item checked in was not checked out AND the option checked_in_ok
is not active. The ok flag is not changed (normally false); the screen
message shows 'Item not checked out'.
[5] (The regular checkin) The item was checked out and AddReturn returned
true. The ok flag is true; no screen message.
[6] ("Otherwise") The item was checked out, but AddReturn returned false.
The ok flag is false; the screen message shows 'Checkin failed'.
Note: Currently this case only refers to the Wrongbranch and withdrawn
messages from AddReturn (where doreturn==0).
Note: Situation 1 and 5 are unchanged. Behavior is slightly changed for
situation 3 and 4; the option is only used when the item was not checked
out. Situation 2 and situation 6 are changed. After bug 18966 SIP
returned OK in case of data corruption (while checkin failed). In the
remaining cases under [6] SIP also returned OK while checkin failed.
Test plan:
[1] Test all six cases listed above. In order to simulate data corruption
insert the issue_id at hand in old_issues before you check in.
In cases 3 and 4 you need to toggle the option in your SIPconfig.xml and
restart the SIP server.
Case 6 can be tested by checking out at branch A, adjusting the value
of pref AllowReturnToBranch and checking in at branch B.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is a trivial fix, but finding the cause for a failing checkin in
SIPServer surely was not.
Without this simple change, I could not checkin an item while the SIP server
just closed the connection and syslog contained nothing useful.
The error can be easily reproduced without this patch by:
use Modern::Perl;
use C4::SIP::ILS::Item;
my $item = C4::SIP::ILS::Item->new('some_barcode');
where some_barcode should refer to an item checked out.
You should trigger the error (with your due date):
2017-07-28 23:59:00 is not an object at line 3.
Why the ILS/Item.pm module still compiles without a warning, is not clear
though.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
FAIL pod Apparent command =cut not preceded by blank line in file misc/cronjobs/advance_notices.pl
FAIL pod Apparent command =cut not preceded by blank line in file C4/SIP/ILS/Item.pm
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The subroutine C4::Biblio::GetBiblioFromItemNumber was wrong for several
reasons:
- badly named, we can get biblio info from a barcode
- SELECT * from items, biblio and biblioitems
makes things hard to follow and debug, we never know where do come from
the value we display
- sometimes called only for trivial information such as biblionumber,
author or title
This patchset suggests to replace it with calls to:
- Koha::Items->find for item's info
- $item->biblio for biblio's info
- $item->biblio->biblioitem for biblioitem's info
Test plan:
Item's info should correctly be displayed on the following pages:
- circulation history
- transfer book
- checkin
- waiting holds
QA will check the other changes reading the code, it's trivial
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::Circulation::GetItemIssue returned all the issue and item
informations for a given issue. Moveover it also did some date
manipulations. Most of the time this subroutine was called, there
additional information were useless as the caller usually just needed
the basic issue's infos 'from the issue table).
This first patch updates the simple calls, ie. the ones that just need
the issue's infomations.
Test plan:
The following operations should success:
- transfer a book
- create a rule for on-site checkouts and confirm that a patron cannot
check more items out that it's defined in the rule.
- Renew an issue using ILSDI
- Using SIP confirm that you are able to see your issues
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Koha's SIP2 server sends the patron's name in the format "Firstname
Surname" which is not very good for machine reading. We need to allow
the format of the patron name to be customized in a manner similar to
what is done with the DA field on bug 16755.
Test Plan:
1) Apply this patch, start or restart your SIP server
2) Find a patron with a first and last name
3) Send a patron information request via the sip2 cli tool
4) Note the AE field has the format "<firstname> <surname>" ( i.e. the current behavior )
5) Add this parameter to the login stanza you are using:
ae_field_template="[% patron.surname %][% IF patron.firstname %], [% patron.firstname %][% END %]"
6) Restart your SIP server
7) Repeat step 3
8) Note the AE field now has the format "<surname>, <firstname>"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <BDaeuber@cityoffargo.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The SIP2 DA field that Koha transmits is an odd and arbitrary format
that some SIP2 clients cannot handle. It would be best if this
format were customizable on a per-login basis in the same manner as
the AV field.
Test Plan:
1) Find an item that is checked out with holds
2) Return the item via SIP2 ( using the SIP2 cli emulator )
3) Note the value of the DA field
4) Apply this patch, restart your SIP2 server
5) Repeat step 2
6) Note the DA field value has not changed
7) Add this parameter to the login stanza you are using:
da_field_template="[% patron.surname %][% IF patron.firstname %], [% patron.firstname %][% END %]"
8) Restart the SIP2 server again
9) Repeat step 2
10) Note the DA field returned is now in the format "$surname, $firstname"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <BDaeuber@cityoffargo.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replace the different calls to GetReservesFromBorrowernumber
with a calls to Koha::Patron->get_holds.
In some places we need to get a restricted set of holds, that's why we
process a search on this holds returned by ->get_holds (on the found
status for instance).
The changes are quite trivial and reading the diff should be enough to
catch bugs.
Test plan:
I would suggest to test this patch with patches from bug 17736 and bug 17737,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Tested both patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
If a record has any holds on it, the SIP2 item information response will
return a value of 08 "waiting on hold shelf" even if the item is not
actually a waiting hold. This is clearly a bug.
Test Plan:
1) Find an item that is not a waiting hold, but whose record has one or
more holds.
2) Issue a SIP2 item information request
3) Note in the response, the circulation status field is '08'
4) Apply this patch
5) Repeat the item informationr request
6) Note the code is now '03' ( available )
7) Check the item in to fill the hold
8) Repeat the item information request
9) Verify the circulation status is now '08'
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Many SIP2 services such as those by Comprise Technologies are able to or
require that an ILS be able to accept writeoffs via SIP2. The SIP2
protocol specifies that payment type be a two digit number, but does not
specify a code for writeoffs. To this end we should allow the write-off
code to be specified in the SIP2 config on a per-account basis so that
if different vendors use different fixed codes for write-offs we can
handle that gracefully.
Test Plan:
1) Apply this patch
2) Modify your SIP2 config to include
payment_type_writeoff="06"
in the login portion of the account you will be using for the test.
3) Restart your SIP2 server
4) Create a fee for a patron
5) Send a SIP2 fee paid message specifying the payment type code we
defined earlier, with a payment amount that is *not* equal to the
amount outstanding for the fee.
6) Note the fee paid response indicates the payment failed
7) Repeat step 5, but this time send the amount outstanding as the
payment amount
8) Note that the fee paid response indicates a successful payment
9) Note in Koha that the fee has been written off!
Signed-off-by: Rhonda Kuiper <kuiper@roundrocktexas.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This small patch corrects the SIP2 checkin response if branch transfer is needed.
It depends on bug 7981 and also removes an obsolete alert check in SIP2.
Test plan:
- apply bug 7981
- make sure syspref AutomaticItemReturn is false
- check 'Return policy' in 'Default checkout, hold and return policy'
- make a SIP2 checkout and checkin from a branch different than item's home branch.
- verify that SIP2 response gives alert CV04 (=send to different branch)
- also verify that response field CT gives correct branch according to 'Return policy'
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The SIP protocol allows for a Fee Paid message to specify a fee
identifier in the CG field. While this field is read and passed to
C4::SIP::ILS::pay_fee, it is not passed along to
C4::SIP::ILS::Transaction::FeePayment::pay and is thus not used. We
should enable this functionality in Koha now that accountlines each have
a unique identifier that can be passed along to the payment requestor
via the AV field line items added by bug 14512.
Test Plan:
1) Create a fee in Koha
2) Ensure your SIP2 server is running and configured correctly
3) Send a 37 Fee Paid message to Koha's SIP server with the
accountlines_id for that fee in the CG fee identifier field,
along with the other required fields.
4) Note that specific fee was paid in Koha
Signed-off-by: Rhonda Kuiper <kuiper@roundrocktexas.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch updates SIP checkin to use reserve_id as param, to fix regression
introduced by Bug 14695.
To test:
Given 1 patron and 1 biblio with two items attached:
1) create two record level holds on one biblio on same user
Using SIP client or telnet:
2) checkin item x on pickup branch, observe item is waiting and hold 1 is filled
3) checkin item y on pickup branch, observe item y now is waiting and x is available
4) apply this patch and repeat 1-3, now expected behaviour should be
that both holds are filled and both items waiting
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It is not about when the hold was 'placed' but if the hold pertains to
the future or not.
Test plan:
[1] Git grep on holds_placed_before_today.
[2] Run t/db_dependent/Koha/Biblios.t
[3] Run t/db_dependent/Reserves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Reserve::GetReservesFromBiblionumber took 3 parameters, the
biblionumber, an optional itemnumber and a "all_dates" flag.
If set, the subroutine returned all the holds placed on a given bibliographic
record, even the ones placed in the future. Almost all of the calls had this
flag set, they will be replaced with a call to Koha::Biblio->holds.
But 5 did not have it:
- C4::Biblio::DelBiblio
-tools/batch_delete_records.pl
=> These 2 were wrong, we want to retrieve the holds to cancel them
before deleting the record. We need to get all the holds, even the ones
placed in the future /!\ CHANGE IN THE BEHAVIOR
- acqui/parcel.pl
=> 1 call per item were made to this subroutine. They have been replaced
with only 1 call to the new method Koha::Biblios->holds_placed_before_today
Then we filter on the itemnumbers.
I think this is wrong: we need the number of holds to know if the record
can be deleted, so even if future holds exist, the deletion should not
be possible.
- serials/routing-preview.pl
- C4::ILSDI::Services::GetRecords
- C4::SIP::ILS::Item->new
=> Seems ok, we just one to display holds placed before today
Test plan:
I would suggest to test this patch with patches from bug 17737 and bug 17738,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
All the values different from the ones GetMember returned has been
managed outside of GetMemberDetails.
It looks safe to replace all the occurrences of GetMemberDetails with
GetMember.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as authflags, a flags key is set containing all the patron flags.
It is only used in a few places and it's better to call
C4::Members::patronflags when we need it.
Test plan:
Look at the diff and confirm that the change make sense
Use git grep to confirm we do not use the flags somewhere else.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply this patch
2) Make a payment via SIP2
3) The payment should succeed
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
