Koha::Patron->issuer is not covered by tests!
Test plan:
1. Set RecordStaffUserOnCheckout to "record"
2. Check an item out and in to a patron
3. Go to their circulation history
=> Without the patch you get an error
=> With this patch applied the table displayed correct. The "checkout by" column contains the name and the link to the librarian
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The .po files contains the whole block after this line. I don't really
understand what's happening but this change fixes the problem.
Test plan:
1. Run the following command before and after the patch and compare the
diff
% gulp po:update --lang de-DE --task messages-js
2. Confirm that the list on this vue is correctly populated
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
in Preservation/WaitingList.vue
See: https://wiki.koha-community.org/wiki/Terminology
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Make some holds on a record and make sure some are set to expired.
2. Go to to reserve/request.pl?biblionumber=X for the biblionumber
3. Try updating something besides the expiration date. i.e. Pickup library
4. Click Update hold(s)
5. Notice the expirated holds have lost their expiration date.
6. APPLY PATCH
7. Try steps 2-4 again, this time the expiration date shold be retained.
8. Make sure Table settings still work and you can properly hide columns.
9. The hold expiration date should be hide-able.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add two requirements when registering a new patron:
- A child patron must have a guarantor. This is controlled by
a new syspref ChildNeedsGuarantor.
- A guarantor cannot be a guarantee.
Test plan:
1. Add a child patron without guarantor or child patron with guarantee
as guarantor succesfully.
2. Apply this patch.
3. Add a child patron as a guarantor.
=> Error is raised.
4. Turn syspref "ChildNeedsGuarantor" ON.
5. Add a child patron without a guarantor and error "Child needs a
guarantor" is raised.
6. Add guarantor. Guarantor can either be existing patron or added with
"Contact" section.
=> Save without errors.
Also prove t/db_dependent/Koha/Patron.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch simply adds a note to the CookieConsent and CookieConsentedJS
system preferences to link to the HTML customizations page and hint at
which customization should be used to affect the components governed by
the preferences.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
For partial receives with items created on order, the
aqorders_items table was not correctly updated when only
some of the ordered items were received.
To test:
1) Create a basket with creating items on order
2) Create an order line with 3 items
3) Close basked
4) Receive shipment and create invoice
5) Receive your created order line
6) Edit first item displayed, add barcode
7) Check checkbox and receive
8) Verify the order line has been split 2:1
9) Receive again - notice all 3 items are showing.
We should only see the remaining 2
10) Undo receive
11) Apply patch
12) Repeat steps 5)-9)
13) Verify that in step 9) only the remaining 2 items display now.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1) Check an item in with already a confirmed hold
2) Cancel the hold, it was cancelled without possibility to choosing a
reason
3) Apply this patch and do it again, you must see an input to choose
your cancellation reason (list from VA)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1. Have some checkouts
2. Go to the issue-table and select some of those checkouts and check them in.
3. Look at the tab, Checkouts(X)
4. This is not updated and now shows an incorrect number of checkouts.
4. APPLY PATCH, clear browser cache/
5. Try again, now when the table reloads the 'Checkouts(X)' tab should be correctly updated.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have two checkouts. Click one for Renew and one for Checkin. Click on Check in selected items.
2. When the table reloads the 'renew' selections should be retained
3. Have two checkouts. Click one for Renew and one for Checkin. Click on Renew selected items.
4. When the table reloads the 'check in' selections should be retained
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the Renew and Check-in buttons so that they have
icons matching the ones used for the Renew and Check-in search tabs in
the header.
The patch also moves the Renew button so that it is next to the Renew
all button. I think this makes more logical sense. So the order is:
- Check in selected items
- Renew selected items
- Renew all
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. APPLY patch, clear browser's cache
2. Have more than 1 checkout issued to a borrower.
3. Load the checkout table on circ/circulation.pl
4. Notice that there is now 'Renew selected items' and 'Checkin
selected items' button.
5. Play around with each making sure that they work as excepted when
checkouts are checked in either the 'Check in' or 'Renew' columns.
6. Uncheck everything in the 'Renew column', the 'Renew selected items'
button should be disabled.
7. Uncheck everything in the 'Checkin column', the 'Checkin selected
items' button should be disabled.
8. Try unchecking some of these to make sure the Renew/Checkin button is
properly disabled when no related checkboxes are checked.
9. Try using the select all/none options at the top of both the 'Renew'
and 'Checkin' columns. Make sure the 'Renew selected items' and
'Checkin selected items' become properly disabled/enabled.
10. Make sure the 'Renew all' button still works properly.
11. Do the test plan of 5th patch "Make sure renew/checkin selections"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This fix patrons_search.t but other selenium tests certainly need
adjustements
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
* When a specific initComplete exists (general patron search)
* When no specific initComplete exists (cities)
=> KO
* ERM tables display twice the "show X entries" dropdown list
* Column filters are not affected
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This change adds the missing subfields h and x to field 583 for
the detail XSLT in the staff interface.
Test plan:
0. Apply the patch and koha-plack --reload kohadev
1. Go to http://localhost:8081/cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber=29
2. Click on tab "5"
3. Scroll down to 583 and click on "ACTION NOTE" to expand subfields
4. Fill in using the following example:
583 0#$adowngraded$c19910110$hJoe Smith$otitle$xfrom secret FRD to confidential NSI
5. Click "Save"
6. Note that the "Action note" now shows "Joe Smith" and "from secret
FRD to confidentail NSI"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to Administration > Did You Mean
2. Attempt to drag and drop plugin options.
--> Confirm that they are not draggable
3. Apply patch and clear browser cache
4. Reload the page
--> Confirm that drag-and-drop now works
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Verify that you can filter by reset password.
And that the uppercase code is replaced by a description.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SelfCheckHelpMessage system preference into HTML
customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the SelfCheckHelpMessage
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SelfCheckHelpMessage is now stored there.
- The HTML customization entry form should offer SelfCheckHelpMessage
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckHelpMessage HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self checkout system and click the "Help" link at the
top.
- On the help page, confirm that the SelfCheckHelpMessage content is
shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SelfCheckHelpMessage." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes some commented out lines and some unnecessary imports. No impact to working code - self signoff
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SelfCheckInMainUserBlock system preference into
HTML customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the SelfCheckInMainUserBlock
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SelfCheckInMainUserBlock is now stored there.
- The HTML customization entry form should offer
SelfCheckInMainUserBlock as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckInMainUserBlock HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self check-in system and confirm that the
SelfCheckInMainUserBlock content is shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SelfCheckInMainUserBlock." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SCOMainUserBlock system preference into HTML
customizations, making it possible to have language- and
library-specific content.
The patch also makes a minor fix to CSS in order to get the "Back to
top" link to show up correctly in self-checkout and self-checkin.
To test you should have some content in the SCOMainUserBlock
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SCOMainUserBlock is now stored there.
- The HTML customization entry form should offer SCOMainUserBlock
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SCOMainUserBlock HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self checkout system and confirm that the
SCOMainUserBlock content is shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SCOMainUserBlock." It should return no results.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Removes two occurrences and a commented one.
Test plan:
[1] Go to cataloguing editor. Open dev console. Clone 500.
[2] Go to Admin/Did you mean. Try to toggle options.
With this patch it works. Without this patch, JS errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates Flatpickr CSS in the OPAC and staff interface so that
date fields are displayed correctly in iOS mobile views.
To test, apply the patch and rebuild the OPAC and staff interface CSS.
- In the OPAC, click "Create new account"
- In the account entry form, confirm that the date of birth field looks
correct and that the date-picker works as it should.
- In the staff client, go to Patrons -> New patron.
- Check the date of birth field in this form too.
This patch has been tested in the Xcode iOS device simulator with iOS
17. While I wasn't able to reproduce the problem in Firefox, I was able
to use the developer tools' responsive design mode to trigger the mobile
view and thus be able to see the styles which are being applied:
- In the OPAC, on the "Create new account" screen, open the Web
Developer Tools panel (Tools -> Browser tools -> Web Developer Tools).
- Click the "Responsive Design Mode" button in the upper-right corner of
the developer tools panel (it looks like a phone and tablet together).
- The main browser window will now how some settings at the top.
- In the first dropdown, choose an iPhone model.
- The date of birth field should now be styled differently because of
the addition of a "flatpickr-mobile" style.
- Right-click the field and choose "Inspect." In the developer console
you can see the styles which are being applied to the field. One of
those should be ".flatpickr-input.flatpickr-mobile"
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This will now use the centered logic from buildSearchPatronQuery, not only
fixing the original issue of not being considering all the terms in the
search input, but also reusing already established code.
Test plan, k-t-d:
1) Install FreeForm, enable ILLModule sys pref, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Create a FreeForm ILL request and input 23529000035676 in the cardnumber, that's "Henry Acevedo".
3) Go back to the ILL list table, input "henry" in the bottom "Patron" filter input and press the "Search" button, notice it fetches the request correctly.
4) Now do the the same search but with "henry acevedo", notice the request is not retrieved.
5) Apply patch. Repeat. Do the same for the "patron" input field and the "keyword" input field.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add table_prefix argument to buildPatronSearchQuery.
This allows the buildPatronSearchQuery function to also perform the search
on a related table, instead of the default patron table.
This is relevant because the query will be performed on the ILL API endpoint,
so the table being searched will have to be prefixed with 'patron.', instead of the
default 'me.'
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fix the following JS error:
Uncaught TypeError: search_fields.forEach is not a function
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To Test:
1. Place a hold
2. Check-in an item of the held record
3. No hold modal 😱
4. APPLY PATCH
5. Hold modal!!!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves form any staff_searchable attribute being automatically
included in the the Standard patron serch, to allowing the librarian to choose.
Current searchable attributes will be marked as 'searched_by_default'
To test:
1 - Add a searchable patron attribute type
2 - Add some values
3 - Confirm they are searched in a 'Standard' patron search
4 - Apply patch
5 - Go to admin - >patron attribute types
6 - Note new 'Searching' column
7 - Confirm attribute is 'Searched by default'
8 - Confirm searches work as before
9 - Edit the attribute type
10 - Uncheck 'searched_by_default'
11 - Save
12 - Confirm attribute not searched in 'Standard' search
13 - Select the attribute in patron search dropdowns
14 - Confirm it is correctly searched
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement allows libraries to modify an existing orderline and increase the quantity in the order. The quantity is increased by adding more items to the order, through the usual Item for which is visible when adding or modifying an order.
To test:
1. Ensure you have a budget, fund, vendor etc. to use the Acquisitions module
2. Open a new basket. Make sure you do NOT check the 'orders are standing' option
3. Add an order to the basket using any method. Add an item or more to this orderline and save the order to the basket
4. Click Modify to edit the orderline
5. Notice the quantity text field. Try to directly change this number. You'll get an error pop-up and be redirected back to the basket.
6. Apply the patch, restart services, refresh the basket page
7. Click Modify to edit the orderline
8. Notice the item form and Items list table is visible with your existing item(s) for this order. There should be no Action buttons as actions can't be done on an existing item order.
9. Confirm you are able to add more items to the Items list and to the order by filling out the form and clicking 'Add item' as normal. Confirm the quantity increases accordingly.
10. Confirm the Edit and Delete buttons for newly added items work as expected
11. Save and confirm the quantity for the orderline has increased
12. Confirm this behaviour persists with the other methods of adding new orders to a basket
Sponsored-by: Pymble Ladies' College
Signed-off-by: Katariina Hanhisalo <katariina.hanhisalo@xamk.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Perltidy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the OpacSuppressionMessage system preference into HTML
customizations, making it possible to have language- and library-specific
content.
To test you should have some content in the OpacSuppressionMessage
system preference before applying the patch. Apply the patch and run the
database update process.
- In the staff interface, locate a bibliographic record and open it for
editing.
- Under tab 9, tag 942, change subfield n, "Suppress in OPAC", to "Yes"
and save the record.
- Go to the OPAC and try to navigate directly to the bibliographic
detail page for that record:
/cgi-bin/koha/opac-detail.pl?biblionumber=X
- You should be redirectd to the "Blocked" page. Under the message "You
are not authorized to view this record" you should see the content
which was previously in the OpacSuppressionMessage system preference.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OpacSuppressionMessage is now stored there.
- The HTML customization entry form should offer OpacSuppressionMessage
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the OpacSuppressionMessage HTML customization and add unique
content to the "fr-FR" tab.
- Go to the OPAC and switch to your updated translation. Try to view
the suppressed record again and confirm that the content you added
for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"OpacSuppression." The description of these preferences should show an
updated message about using HTML customizations to create
OpacSuppressionMessage content.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This makes it more flexible and the slip can be added to the
notice name easily.
For example: In German the slip would usually be part of the word, not separate:
Gebührenquittung (slip = quittung)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This renames the notices and slips module from
Patrons toolbar (slip) to Patrons (custom slip)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Perltidied the section with tabs in printslip.pl
* Fixed indentation and tabs in letter.tt
* Added missing TT filters to members-toolbar.inc
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new module to letters 'patron_slip' / Patrons toolbar
(slip)
This also combines some of the slip printing JS to make things more
direct
To test:
1 - Apply patch
2 - restart_all
3 - yarn build
4 - Confirm you can print slip, summary, quickslip, and checkin slip
when viewing a patron's account
5 - Enable DisplayClearScreenButton syspref, and test that it works
with both values
6 - Go to Tools->Notices and slips
7 - Define a new notice in the 'Patron toolbar (slip)' module
8 - Enter content like below in the 'Print' transport:
Patron has [% borrower.holds.count %] holds
List of holds:
[% FOREACH hold IN borrower.holds %]
===============================
Reserve id: [% hold.reserve_id %]
Title [% hold.biblio.title %]
[% END %]
9 - Go to patron scree
10 - Note new option under 'Print'
11 - Print the new slip and confirm it works (try with and without
placing holds for patron
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the Damaged radio box options ( Ignore, yes, no ) in favor a full damage status search option
To test:
1. APPLY PATCH, restart services.
2. Make sure you mark some items as damaged.
3. Go to the item and search and limit by 'Damaged'
4. You should only see your 'Damaged' items.
5. Export the results as a CSV, make sure the CSV is well-formed and accurate.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Perltidied.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch follows the logic of bug 32166 and adds specific inputs for each order to avoid any misalignment when some records are not imported
To test:
1 - Find a vendor in acquisitions
2 - Create or find an open basket
3 - Add to basket form a new file
4 - Stage file and add to basket
5 - Select the second record in the list
6 - Enter price info
7 - Save (don't forget, you need to set item type in the second tab)
8 - The order has no price info!
9 - Apply patch
10 - Repeat 3-7 above, staging file fresh
11 - Confirm order has correct prices
12 - Test with a file with many records
13 - Confirm any combination of choosing/skipping records works as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds Bootstrap classes to the "Add" button on the curbside
administration page, in the "Curbside pickup hours" section. This makes
it consistent with the markup of similar buttons in the interface and
makes it slightly smaller so that it fits better in the form.
To test, apply the patch and make sure the "CurbsidePickup" preference
is enabled.
- Go to Administration -> Curbside pickups.
- Fill out the form, including the "New slot" fields in the "Curbside
pickup hours" section.
- Confirm that the corresponding "Add" button looks correct, and that
it works to add your new slot.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Make sure MARC21 is mentioned, as this only updates MARC21 XSLT files
* Move ending punctuation outside the pull down
* remove 'obey' - it's not needed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When using the facets for author, i.e. limiting a search, it makes sense to preserve the default sort order for the results (relevance, etc)
When clicking on an author to search the catalog for all works by an author, it would be nice to be able to optionally specify sorting for the listing - i.e. publication date, or title
This patch adds two new system preferences:
AuthorLinkSortBy
AuthorLinkSortOrder
To test:
1 - Do a search in intranet and staff for 'austen'
or an author you have multiple titles from
2 - Click the linked name
3 - Note a new search is performed, sorted by field from
defaultSortField preference
4 - Apply patch, updatedatabase, restart_all
5 - Ensure nothing has changed by searching again
6 - Set AuthorLinkSortBy to 'date of publication' and
AuthorLinkSortORder to asc
7 - Search again, comfirm links obey sorting specific above
8 - Test other values - confirm links are updated in both staff/opac
and results/details
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>