* Add +x to atomic database update file
* Perltidy
* Add spans to rewritten tab label for translatability
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
So that pickup delay can have a different value per patron category,
item type or branch.
To test:
1) Update database, restart services
2) Set ReservesMaxPickUpDelay syspref (if not already set)
3) Edit your circulation rules and set a value under 'Holds pickup
period (day) that is DIFFERENT from ReservesMaxPickUpDelay. Set a few
different numbers for different branches as well.
4) Place a hold on a biblio from the staff client.
5) Check in an item from that biblio and confirm the hold as waiting
6) Confirm the expiration date is calculated using the 'Holds pickup
period' value instead of the ReservesMaxPickUpDelay syspref
7) Revert the waiting status and delete the hold
8) Re-place the hold on the biblio on the OPAC. Notice that when you
change the pick up location, the number of days in the pickup message
below the dropdown changes based on the circ rules.
9) Create a holiday with a date that will overlap with the 'Holds pickup
period'
10) Check in an item from that biblio and confirm the hold as waiting
11) Confirm the expiration date is calculated using the 'Holds pickup
period' value AND considers the special holiday
12) Confirm tests pass t/db_dependent/Holds/WaitingReserves.t
13) Test Talking Tech:
13a) Enable TalkingTechItivaPhoneNotification
13b) Go to Tools -> Notices & slips. Add content to the HOLD phone
(itiva) notice.
13c) In your terminal, run perl
/path/to/koha/misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl -o
~/itiva.tmp -w 0 --type=RESERVE
Sponsored-by: Catalyst IT
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have a record with several holds on it.
2. Go to the holds page for that record ( /cgi-bin/koha/reserve/request.pl?biblionumber=144 )
3. Cannot sort by columns
4. Apply patch, restart_all
5. Now the table should be a dataTable that will allow you sort.
6. Try hiding columns by clicking on the 'Columns' icon above the table, make sure columns are correctly being hidden.
7. Try to hide columns by going to Adminstration > Table settings ( Circulation > Holds > patron_holds_table ), make sure columns are correctly being hidden.
8. Now login with a user who has the 'place_holds' permission but does NOT have the 'modify_holds_priority' permssion.
9. The table will not have the change priority columns. Make sure all columns can still be hidden/shown correctly for that use.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jessica Zairo <jzairo@bywatersolutions.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch finally adjust the default mappings to add a new field to
the elastic index with the title stripped of punctuation
This method optionally allows the library to place the filtered version in the same
search field, or a new search field. The default mappings will include the filtered version
in a keyword search, but not a targeted search
To test:
1 - Import some affected records via z3950, e.g.:
Carrie's war
1,000 Japanese words
2 - Search (using Elasticsearch) for the titles without including punctuation
Carries war
1000 Japanese words
3 - No results
4 - Reload mappings and reindex
perl misc/search_tools/rebuild_elasticsearch.pl -v -r
5 - Search again
6 - Success!
7 - Search title specifically:
ti:Carries war
8 - No results
9 - Adjust mappings.yaml to add second mapping for 245 to title index:
- facet: ''
marc_field: 245abp
marc_type: marc21
sort: 1
suggestible: 1
filter: punctuation
10 - Reload mappings and reindex
11 - Repeat 7
12 - Success
Signed-off-by: Danielle M Elder <danielle.elder@law.utexas.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new column to the 'Bibliographic records' tab in
Administration > Search engine configuration (Elasticsearch)
To test:
1 - Confirm the new 'filter' column shows
2 - Update an existing field to set filter to punctuation
3 - Confirm it can be saved
4 - Add a new field
5 - Confirm it saves correctly
6 - Unset filter for a field
7 - Confirm it saves
Signed-off-by: Danielle M Elder <danielle.elder@law.utexas.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch renames the table in the columns configuration to match the id
used in the templates
It also adds a section for the moremember table to alllow config of each page as we do for issues
Lastly we add the table controls as they exist on the issues tables
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the holds table on circulation and moremembers to use
table settings and hides the note column by default to preserve existing views
To test:
1 - Apply patch
2 - Enable system preferece 'OpacHoldNotes'
3 - Place a hold on the opac and enter a note
4 - Confirm it shows on the patron's page
5 - View the patron in staff client
6 - Ensure the holds note does not display on Holds tab in Checkout or Details view
7 - Go to Admin->Table settings->Circulation
8 - Under holds_table confirm 'notes' is hidden by default
9 - Uncheck the box
10 - Refresh patron pages and confirm hold note shows
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch, restart_all
2. Check some items out and prepare some reasons that would initiate a branchtransfer. According the schema it can be any of the following: 'Manual', 'StockrotationAdvance', 'StockrotationRepatriation', 'ReturnToHome', 'ReturnToHolding', 'RotatingCollection', 'Reserve', 'LostReserve', 'CancelReserve', 'TransferCancellation', 'Recall', 'RecallCancellation.
3. CHeck in some the items and notice the 'Transfer reason' column in the table. Make sure the reasons are acurate and make sense.
4. To go Table settings and find the 'checkedintable'. Make sure you can properly hide the column from the display.
Signed-off-by: AndrewA <andrew.auld@ptfs-europe.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the late orders page so that the table of
information contains a column for basket creation date. This will allow
administrators to configure the table to sort by default on basket
creation date if they wish.
To test, apply the patch and restart services.
- Go to Acquisitions -> Late orders.
- The table of late orders should include a column labeled "Basket date"
showing the basket creation date.
- The dates should be formatted correctly and the column should sort
correctly.
- Go to Administration -> Table settings and navigate to the settings
for the lateorders page.
- Try changing various settings for the table to confirm that everything
works correctly, including setting the default sort to use the basket
date column.
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 32721: (QA follow-up) Rename fields to opac*
This patch updates the field names to reflect that they're OPAC
related.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 32721: (QA follow-up) Fix rebase errors
We let some superflous template params creep back in during a rebase
somewhere.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows for branch specific userJS and userCSS to be added through the libraries table. This works in conjunction with the global UserJS and UserCSS functionality and allows for multiple OPACs with different css and js options.
Test plan:
1) Add to apache conf (/etc/apache2/sites-available/kohadev.conf)
SetEnv OPAC_BRANCH_DEFAULT "FFL"
RequestHeader add X-Koha-SetEnv "OPAC_BRANCH_DEFAULT FFL"
2) In the container, run restart_all
3) Navigate to the OPACUserJS and OPACUserCSS system preferences and add the following: OPACUserJS - console.log('Hello from global sysprefs');, OPACUserCSS - 'body { background-color: black; }'
4) Refresh the OPAC and the background should be black and the message should be logged to the console in developer tools
5) Navigate to Administration > Libraries
6) On the Fairfield branch (if this does not exist you will need to create a branch with a code matching the code that you added to the apache conf file), click edit
7) At the bottom there should be two fields to add userjs and usercss, complete with Codemirror syntax checking
8) In userjs add console.log('Hello from branch level'); and in usercss add 'body { background-color: blue; } then save
9) Return to the OPAC and refresh
10) If you are logged out of the OPAC it should now be logging both the message from global and from the branch level and the background should be blue (if not you will need to log out)
11) Log back into the OPAC using a user that DOES NOT have a default branch matching the branch you added to the Apache conf
12) The OPAC should now revert to only showing the global message in the console with a black background
Sponsored-by: PTFS Europe
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the item search fields
administration page, making sure the page title, breadcrumb navigation,
and page headers are consistent with each other.
The patch makes some changes to the way new item search fields are added
in order to keep the display consistent with other similar interfaces:
The "add" form is no longer shown dynamically from the page listing item
search fields. Clicking the "New search field" toolbar button will now
take you to the same template used for editing existing search fields.
This allows us to put the correct context into page title, breadcrumbs,
and headings.
To test, apply the patch and go to Administration -> Item search fields.
Test the process of adding a new search field and editing an existing
search field.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- UI adding support for batch statuses in batch UI
- Admin UI for managing batch statuses
- API specs
Co-authored-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Edith Speller <Edith.Speller@ukhsa.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- Add batch column to requests table
- Establish if there are any availability or metadata enrichment plugins and pass that to the template
- Verify if we have any backend that can support batches, if not, don't show the option
- Updates to the ILL toolbar
- New ILL batch modal
- New Koha classes
- API specs
Co-authored-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Edith Speller <Edith.Speller@ukhsa.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries debar Patrons at the end of the year for having unpaid fines,
like in Bug 15157. Currently librarians have to manually remove this type of
debarments after Patron has paid his/her fines.
This patch adds ability to create restrictions which are lifted after
patron pays ceratain amount of fines.
To test:
1. Apply this patch.
2. Restart your services if needed.
3. Navigate to page restrictions.pl.
=> Note that table has two new colums in it, "Lift after payment?" and "Fee limit".
4. Add new restriction which has "Lift after payment?" set
as Yes and fee limit as 5.
5. Create fees for a patron so they exceed fee limit e.g. 10
6. Add restriction made in step 2. for the patron
7. Pay patrons fees partially so that they go under fee limit
=> Note that patrons restriction should now be lifted.
Also prove t/db_dependent/Patron/Borrower_Debarments.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the system preferences interface so that preferences
which ask for a single authorized value can offer a dropdown menu of
choices instead of a text field.
The patch also updates a few existing preferences to use the new
feature: BundleLostValue, BundleNotLoanValue, and
ClaimReturnedLostValue.
To test, apply the patch and restart services.
- Go to Administration -> System preferences and search for "authorized
value."
- The search results should include the entries for BundleLostValue,
BundleNotLoanValue, and ClaimReturnedLostValue.
- Confirm that the dropdowns show the correct authorized value category
(LOST or NOT_LOAN)
- Confirm that setting or unsetting each of the preferences works
correctly.
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the MARC bibliographic
framework administration page, making sure the page title, breadcrumb
navigation, and page headers are consistent with each other.
The file admin/marc_subfields_structure.pl is modified so that it
provides the framework name to the template.
Test each page to confirm that page title, heading, and breadcrumbs are
consistent:
- MARC bibliographic frameworks
- New framework
- Edit framework
- Delete a framework which is not used
- Delete a framework which is in use
- Framework MARC structure
- New tag
- Edit tag
- Delete tag
- View subfields
- Edit subfields
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adds the ability to easily place a hold on an ordered item from a basket
To test:
1) Apply patch
2) Go to acquisitions
3) Go to an existing basket, or create a new one
4) Add an order to the basket
4) Notice there is a "Place hold" column in the Orders table
5) Click the link for an item which allows you to place a hold easily on the biblio
6) On the columns settings, toggle the "Place hold" column to hide it, and make sure it gets hidden
Sponsored-by: Pymble Ladies’ College
Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 22284 introduced ability to create hold groups.
We should have ability to create float groups in
same manner. This patch adds checkbox "Is local
float group" to group creation feature and new return
policy "Item floats by librarygroup".
To test:
1. Add new float group and some libraries to it.
2. From circulation and fine rules, set default
return policy as "Item floats by library group".
3. Check out an item for a patron.
4. Set library as one that belongs in the same
float group.
5. Check in the item.
=> Observe that notice for transfer doesn't pop up.
6. Check out again.
7. This time set library as one that doen's
belong in the same float group.
8. Check in.
=> Observe that notice for transfer pops up.
Experiment this feature by changing return policy
per library, item type etc.
Also prove t/db_dependent/Koha/Libraries.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the requirements that updating a system preference
requires a CSRF token. (Also, adding and deleting local system preferences.)
0. Apply patch
1. koha-plack --reload kohadev
2. Add local system preference
3. Update local system preference
4. Delete local system preference
5. Update normal system preference
6. Note no errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At the moment it's quite a lot of clicks to get from the basket
summary to the invoice something was received in. This adds a nice
shortcut by creating a new column for the invoicenumber in the basket
summary table.
To test:
* Make sure you have a basket with some received and unreceived
order lines
* Verify that the (received) shows for your received lines
* Verify no invoice number or link to it in sight
* Apply patch
* Verify that there is now a column for the Invoice containing
the invoice number as a link to the invoice
* Test with a staff patron, that doesn't have edit_invoices permission
* Verify that now instead of a link you see the invoice number as text
Be happy, sign off ;)
Note: this doesn't change the CSV export. The way the CSV is built is
quite different to the summary table, so it would be better handled
in a separate bug/patch. The columns are already quite different!
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Émily-Rose Francoeur <emily-rose.francoeur@inLibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the option to display sort1 and sort2 columns in the
view of the contents of a basket in acquisitions. The columns are
labeled "Statistic 1" and "Statistic 2" to match the labels in the
order creation/edit form.
The fields are hidden by default in the updated table configuration.
To test, apply the patch and restart services.
- Go to acquisitions and create a basket if necessary:
- Search for a vendor and click New -> Basket from the vendor
toolbar on the vendor search results screen.
- Create a basket, then click "Add to basket" from the basket details
page.
- Add an order to the basket.
- With at least one order in the basket, check the table of orders in
the basket.
- The columns should be unchanged.
- The table configuration button should show the two statistics fields
as hidden. Test that they can be displayed.
- Go to Administration -> Table settings.
- Under Acquisitions -> basket, try changing the settings for the
Statistic 1 and Statistic 2 fields, and check that your changes are
reflected in the basket view.
- Test with a vendor which has an EDI account:
- Enable the EDIFACT system preference.
- Go to Administration -> EDI accounts and create an account for your
vendor.
- Confirm that the table of orders in your basket still displays
correctly now that the "Supplier report" column is present.
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Ray Delahunty <r.delahunty@arts.ac.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The first column was named basket_number, but it's actually the
order_line.
To test:
* Edit column configuration for acquisition > basket
* Make sure to set at least one checkbox for 'basket_number'
* Apply patch, run database update
* Verify that the first column is now 'order_line', but your
settings have been preserved
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At some point the option for 'undef' was removed from te sort options
and was collapsed to yes/no
The dropdowns when adding a new field were missed, this patch corrects that.
While undef in a mappings file wil stil load, when saving we should not privde undef any longer
To test:
1 - Browse to bottom to add a new field on the 'Bibliographic records' tab in
Administration > Search engine configuration (Elasticsearch)
2 - Set sortable column to undef, set other columns and provide a valid field
3 - Click '+Add'
4 - Click 'Save'
5 - At top of page you receive an error:
An error occurred when updating mappings: DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Column 'sort' cannot be null at /kohadevbox/koha/Koha/SearchField.pm line 37 .
6 - Apply patch, restart all
7 - Add a new mapping, your only choices are Yes/No
8 - Save mapping
9 - Confirm it saves correctly
Signed-off-by: Salah Ghedda <salah.ghedda@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To avoid confusion around commit messages and the content of this enhancement, this first commit is a squashed commit of all the original code submited to this bug. Following a few years of inactivity, it has been rebased and re-submitted with some fixes and concept changes contained in the more recent commits.
Signed-ff-by: Barry Cannon <bc@interleaf.ie>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: (follow-up) Add missing filters
(cherry picked from commit 6b8565b949b62269f6d850e6d412458d0dbcfb37)
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: Fix accessibility issues
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: Update to new atomicupdate structure
This patch consolidates the previous 4 database update files into one atomicupdate file in line with the new structure
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: Change ConsentJS to CookieConsentedJS
This patch updates the name of the ConsentJS syspref to CookieConsentedJS and amends the description to be more clear what the syspref is for
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: Stop the codemirror editor and delete confirmation from duplicating
Previously, if the "Add new code button" was clicked in the CookieConsentedJS editor, the original entry would have duplicated CodeMirror editors.
This was exponential, i.e adding two new lines would result in three codemirror editors appearing on the first entry, two on the second and so on.
The click event was not being applied properly and was being applied to every element with the .expand-textarea class, rather than specifically the new elements being created. The addExpandHandler function now loops through each element individually and decides whether to apply the click event handler.
Similarly, the delete confirmation was dupliacting for the same reason. This has also been resolved.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: Remove two sysprefs and replace with html customisations
Currently there are two sysprefs - CookieConsentBar and CookieConsentPopup. These allow the user to select what text they would like to see in the consent bar and modal. These have been removed and replaced with HTML customisations to allow more flexible customisations and different languages.
Sponsored by: PTFS-Europe
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: (QA follow-up) Small fixes and tidy-ups
This patch does the following:
- Realphabetizes the lines in sysprefs.sql
- Fixes a formatting error in patrons.pref
- Adjusts the position of the cookie consent bar if the language selector is visible
- Fixes translatability on the syspref modal
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: (QA follow-up) Allow staff to view their cookie consents
This patch allows staff to view their cookie consents through a link in the dropdown menu in the navbar. Previously staff had no way of accessing their cookie consents
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: (QA follow-up) Add cancel button to cookie modal
This patch adds a cancel button to the modal for reviewing cookie consents. Previously there was no way to exit without selecting one of the cookie options
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: (QA follow-up) Add filtering for OPAC only and staff only cookies
This patch fixes an issue where cookies selected as OPAC only would still show in the staff client and vise versa. The cookies are now filtered and only the correct cookies will be used in the OPAC and staff client
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27378: (QA follow-up) Fix tests and character encoding
This patch fixes an encoding issue when using diacritics. It also fixes a failing test, corrects the format of the "Cancel" links in the modal and perltidy has been used on all relevant files
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes a missing $crypt in the show_account function when deleting an edifact ordering account.
Test plan:
1) In system preferences search for EDIFACT and change EDIFACT to Enable
2) Navigate to Administration > EDI accounts
3) Create a dummy account
4) Try deleting the account using the delete button in the actions column on the far right
5) An error should be thrown - "Can't call method "decrypt_hex" on an undefined value"
6) Apply patch
7) Try deleting the account again
8) This time it should work and show the confirmation dialog box
9) Sign off
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an entry for the requested cancellation date column to
columns_settings.yml so that the column can be configured correctly in
table settings and on the fly.
To test you will need at least one hold with a cancellation request:
- Go to Administration -> Circulation and fine rules -> Default waiting
hold cancellation policy
- Add at least one rule allowing cancellation on waiting items.
- Place a hold for a patron which would fall under the rule you defined.
- Satisfy the hold by checking the item in at the hold's destination
location.
- Cancel the hold, either by logging in to the OPAC as the patron with
the hold, or in the staff client via the holds tab on the patron's
record.
- Apply the patch and restart all services.
- Go to Circulation -> Holds awaiting pickup
- In the "Holds with cancellation requests" tab, confirm that there is a
"Date cancellation requested" column and that it is one of the choices
under the "Columns" button.
- Confirm that the correct columns are shown and hidden when making
selections in the columns menu.
- Go to Administration -> Table settings -> Circulation -> Holds
awaiting pickup.
- Test setting "Is hidden by default" and "Cannot be toggled" for
various columns in the table, including the "Date cancellation
requested" column.
Signed-off-by: Quinn <quinn.morris@citruslibraries.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Do not display a warning when we are editing a restriction type and no
other types with this description exists.
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch simply remvoes sort from all elements that are not strictly
the main title
Note:
If multiple fields are set as sort, they are collapsed into a single entry in
the {field}__sort field in the ES index. The order will be determined by the order in
the marc record
To test:
1 - Apply patch
2 - perl misc/search_tools/rebuild_elasticsearch -r -v
3 - Search the catalog
4 - Sort by title
5 - Confirm records are correct
6 - Add a 240 (before the 245) with subfield a 'AAAAA'
7 - Confirm sorting is not affected
8 - View record details, click 'Elasticsearch record: Show'
9 - Find 'title__sort' and confirm it looks correct (does not include AAAAA)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently the debit types to be excluded from the noissuescharge syspref are
hardcoded in non_issues_charges which gives no flexibility for selecting which
debit types should be included. This patch amends the subroutine to use a
database flag to identify which debit types should be included. It also adds a
column to the table in the Debit Types area of System Preferences which shows
which debit types are included. The ability to edit all debit types has been
added rather than just the non-system ones and the flag to include/exclude the
debit type from noissuescharge can be changed by clicking that edit button.
Test plan:
1) Choose a patron and add some fines to this patron that have different debit_types
2) Navigate to system preferences and observe that currently you can only amend
the noissuescharge included debit types using three preferences:
ManInvInNoissuesCharge, RentalsInNoissuesCharge, HoldsInNoissuesCharge
3) Apply both commits attached to this bug
4) Navigate as above and observe that these three system preferences are now gone
5) Navigate to Debit Types in System Preferences, the table should have a column
called No issues charge that shows whether a debit_type is Included or Not
included
6) Click the edit button and there should be a checkbox for Included in
noissuescharge
7) Change some of the debit_types using this option and observe that the patron
you added fines to will either be blocked from checkouts or able to checkout
depending on which debit_types you include and the value of these fines.
Mentored-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows to create additional fields for order lines.
Once created, these fields can be filled during order line creation or
modification.
If additional field is linked to a MARC field, there are two possible
scenario:
- MARC field mode = get: The field cannot be modified and its value is
retrieved from the bibliographic record (current behaviour)
- MARC field mode = set: The field can be modified and its value is
saved to the bibliographic record (new behaviour)
If additional field is linked to an authorised value category, then
authorised values are used. If not directly linked to an authorised
value category, but linked to a MARC field, a search for an AV category
is made on MARC default framework.
This patch doesn't display additional fields value anywhere (except in
order line creation/modification). Future patches will do that.
Test plan:
1/ Go to Acquisitions home
2/ In the left menu, click on "Add order line fields"
3/ Click on "New field" button
4/ Give the field a name (unique), no AV category and no MARC field.
5/ Save.
6/ Create 5 other fields:
a/ no AV category, a MARC field not linked to AV category, MARC field
mode = get
b/ no AV category, a MARC field not linked to AV category, MARC field
mode = set
c/ no AV category, a MARC field linked to AV category, MARC field
mode = get
d/ no AV category, a MARC field linked to AV category, MARC field
mode = set
e/ an AV category, no MARC field
7/ Create everything you need to be able to create order lines
(supplier, basket, ...)
8/ Create an order line. At bottom of the page, you should see your
additional fields, with authorised values dropdrown list for fields
(c), (d) and (e). Fields (a) and (c) should be disabled.
9/ Fill these fields with some data and save order line
10/ check that data was correctly saved into biblio for fields (b) and
(d), but not for (a) and (c)
11/ modify the same order line, check that values you've filled are
correctly retrieved and that values for (a) and (c) were correctly
retrieved from the bibliographic record
12/ modify all values, save, and check biblio once again
Signed-off-by: Harold Dramer <harold.dramer@nyls.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are storing edi vendor acccount passwords in clear text in the
database. Now that Koha has the Koha::Encryption module, we should
use that to encrypt passwords for all existing and new EDI accounts.
Test Plan:
1) Apply this patch
2) Create one or more EDI vendor accounts
3) Run a report to view the account passwords, note they are in clear
text
4) Run updatedatabase.pl
5) Re-run the report, account passwords should be encrypted now
6) Edit a vendor EDI account, note you can still view and update the
password for an account
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just send the codes and descriptions only to client.
Adding a few comments to the reduce construction.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The sequence of options actually matters, not the name.
Library and category were switched, this patch fixes it and
now it should all hide/show as expected:
* Go to administration > table configuration
* Hide library in memberresultst
* Go to patron search and search
* Verify that category was hidden instead
* Apply patch
* Verify now label and columns for library and category
match with configuration.
Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Use kohaTable requesting the REST api instead of the old KohaTable
Co-authored-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In Elasticsearch fields config field_config.yaml, default type as a field 'ci_raw'. This is used for exact search.
This field is missing for type standard number 'stdno'.
Test plan :
1) In the staff interface, go to Administration, and search for SearchEngine
2) Make sure that the SearchEngine preference is set to Elasticsearch and save
3) Return to Administration and select "Search engine configuration"
4) Change the type of "Heading-Main" to "Std. Number" and save
5) Rebuild the index (e.g. "koha-elasticsearch --rebuild -d kohadev")
6) Go to the main staff page and select Authorities
7) Search for a heading (e.g. "A Dual-language book")
=> Result is found with or without patch
8) Click on the sliders and select "is exactly" for the operator and search
=> Result is found only with patch
9) Apply the patch
10) Rebuild the index (e.g. "koha-elasticsearch --rebuild -d kohadev")
11) Click on the sliders and select "is exactly" for the operator and search
=> Result is found only with patch
Signed-off-by: Kevin Carnes <kevin.carnes@ub.lu.se>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Before this patch we used two indexes for the thesaurus values, we can
simply index both needed fields into a single index and just form the
search correctly.
This patch also ensures we pass the 'thesaurus' vlaue for the heading
directly to the query builder - for zebra it goes through, and for ES
we convert it to the expected code.
This patch also moves the necessary mappings out of the user definable
mappings and hardcodes them. There is precedent for this with
'match-heading', it ensures matching works as expected
To test:
1 - Follow previous test plan in Zebra and ES
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some old-style code is making our tests fail when run in Debian Testing.
This patch addresses this.
To test:
1. Launch bookworm KTD:
$ KOHA_IMAGE=master-bookworm ktd up -d
2. Run:
$ ktd --shell
k$ prove t/00-testcritic.t
=> FAIL: It fails!
3. Apply the patch
4. Repeat 2
=> SUCCESS: Tests now pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch and restart_all
2. From a patron's Accounting tab add some invoices that are related to an item.
3. From the 'Make a payemnt' notice the new Call number column.
4. Using Table settings, make sure you can properly hide the column.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch and restart_All
2. From a patron's Accounting tab add some invoices that are related to an item.
3. From the 'Make a payemnt' notice the new Home library column. Make sure it displays correctly and is the same as what you see on the 'Transactions' tab.
4. Using Table settings, make sure you can properly hide the column.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Place some holds
2. Go to Circulation > Holds to pull
3. Notice there is not column to indicate collection ( CCODE )
4. Apply patch and restart services
5. Step 2 again, this time you should see a column for holds to pull
6. Using both the Columns button and via 'Table setting' attempt to hide the column and other columns. Ensure everything is being heiiden correctly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 32421: (follow-up) Correct table settings
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch, restart_all
2. Create a manual invoice for an item that has an item.itemcallnumber
3. Go to the transaction tab and see that the particualar accountline contains a callnumber in the new callnumber column.
4. Make sure you can hide the column, and other columns, correctly via Table settings or via the Column icon.
Signed off by: Michael Perry (Siskiyou County Library)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a catalog concern management page to the staff client
accessible via the cataloging home page and a new 'Pending catalog
concerns' link on the front page.
This includes added the requisit ticket_updates api endpoints and notice
triggers and templates for notifying patrons of changes to their
reported concerns.
Test plan
1) Enable the `OpacCatalogConcerns` system preference
2) Catalog concern management is tied to your users ability to edit the
catalog, `editcatalogue`.
3) Confirm that you can see 'Catalog concerns' listed on the cataloging
home page if you have the `editcatalogue` permission and not if you
do not.
4) Add a new concern as an opac user.
5) Confirm that once a concern is present in the system you see a count
of 'catalog concerns pending' on the intranet main page if you have
the `editcatalogue` permission.
6) Click through either the cataloging home page or pending concerns
link on the main page to view the new concerns management page.
7) Confirm the table displays as one would expect.
8) Confirm clicking on details or the concern title exposes a 'details'
modal with the option to add an update or resolve the concern.
9) Verify that if selecting 'notify' when updateing or resolving a
concern triggers a notice to be sent to the opac user who first
reported the issue.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Helen Oliver <HOliver@tavi-port.ac.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The table settings were missing the recently added columns, resulting
in strange behaviour using the column visibility settings:
* patron expiration
* can be guarantee
* exclude from local holds priority
To test:
* Go to administration > patron categories
* Verify some columns are missing from the Columns selection
* Apply patch
* Verify the missing columns are now present and all columns
can be hidden/unhidden as expected
* Change settings for the table in administration > table settings
* Verify the settings have the desired effect
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some of our scripts have a space in the "shebang" (first) line:
#! /usr/bin/perl
This is not illegal, and it does work, but it is good to be
consistent, so this patch removes the space.
To test:
- Run: grep -rn --include=*.pl '#! /usr/' *
- See the list of files that have a space in the shebang
- Apply the patch
- Run the command again, there should be no output, meaning there
are no more files with space in the shebang
- Have a look at the patch and check that it only changes the
shebangs
- Sign off
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
- Navigate to ILL requests page from the main menu after setting up your ILL backend.
- Observe that Price Paid column does not exist either here nor in the column configuration.
- Apply patch
- Observe that Price Paid column now appears in ILL requests table and in the column configuration page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In Suggestions management, in the table displaying all suggestions, add
a column to display suggester category. This way, it is possible for
example for the librarian managing suggestions rather to prioritize
suggestions coming from teachers than those coming from students.
TEST :
1. Apply the patch.
2. Acquisition > Suggestions.
3. There is a new column 'Suggester category'. It can be
displayed/hidden.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When saving OAI set mappgins we are checking for truth, this prevents
saving subfield 0. We should check for content
To test:
1 - Go to Admin->OAI sets
2 - Create a set
3 - Define mappings for the set
4 - Attempt to save a rule on field 952 subfield 0 (withdrawn)
5 - It does not save
6 - Apply patch
7 - Try again
8 - Success!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Bob Bennhoff - CLiC <bbennhoff@clicweb.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the ->store method take care of setting the server as
the only default one.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/SMTP/Server.t
=> SUCCESS: Tests pass!
3. The UI keeps working as it should.
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 22343 adds the ability to defined SMTP servers via the UI; But to then utilise them you have to go to each individual library via the libraries admin area and select the SMTP server.
We should have a way to override the fallback/default SMTP server right from the SMTP servers administration page.. setting one of our defined SMTP Servers as the system default rather than using the hard coded fallback options.
Test Plan:
1) Apply this patch set
2) Restart all the things!
3) Browser to the SMTP servers editor,
verify only one server can be set as the default server
4) Set a default server, verify that server was used to send email from
a cronjob, AND/OR prove t/db_dependent/Koha/SMTP/Server.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Trivial fix.
To reproduce:
1. Go to /cgi-bin/koha/admin/columns_settings.pl
2. Observe in the section Acquisition > Basket > Orders an empty field in the Column name, the row between fund and supplier_report rows: it was expected estimated_delivery_date value.
3. Apply the patch.
4. Restart Memcached (console: service memcached restart)
5. Reload cgi-bin/koha/admin/columns_settings.pl: that empty row now will have estimated_delivery_date value.
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1. Visit Administration > Patrons and circulation > Limit transfer limits
2. Observe collection codes are displayed as tabs on the Limit transfer
limits page when the BranchTransferLimitsType syspref = 'Collection
code'
3. Switch the BranchTransferLimitsType syspref = 'item type'. Refresh
the Limit transfer limits page and observe the tabs have changed to item
type codes
4. Apply patchset and restart services
5. Reload the Limit transfer limits page and confirm it displays
correctly with the BranchTransferLimitsType = 'collection code' and
'item type'
6. Confirm you can successfully save transfer policies
Sponsored-by: Catalyst IT
Signed-off-by: Jacob Omara <jacob.omara@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 27360 added public info on libraries table.
This should be added to columns settings.
Currently the column "STMP server" can not be managed in settings.
Test plan :
Play with columns settings of table Administration > Libraries
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When one tries to delete rule with field "Decreased loan period
for high holds" filled, delete fails without errors. This happens
because rule isn't set in code section handling the delete in
smart-rules.pl.
To test:
1. Create a new circulation rule and fill all fields.
2. Try to delete the rule.
=> Rule isn't deleted, all fields except "Decreased loan period
for high holds" are now empty or have value "Unlimited".
3. Modify the rule and set field "Decreased loan period for high
holds" empty.
4. Delete the rule.
=> Rule is deleted successfully.
5. Create a new rule, fill all fields expect field "Decreased loan
period for high holds".
6. Delete the rule.
=> Rule is deleted successfully.
7. Apply this patch.
8. Again create a new rule with field "Decreased loan period for high holds" filled.
9. Try to delete the rule.
=> Rule is deleted successfully.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Related to bug 24669, why didn't we use strip_non_numeric for one occurrence?
Note that there is still a problem, if none of the 3 inputs is filled,
no rule will be created (ie. action ignored)
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patches allows "Update on Login" to be set to "Yes" when
creating a domain as part of a new Identity Provider.
Test plan:
1) Apply patch
2) koha-plack --reload kohadev
3) Go to http://localhost:8081/cgi-bin/koha/admin/identity_providers.pl
4) Click "New identity provider"
5) Fill in "Code" and "Description" with "test"
6) Click "Add default OAuth configuration"
7) Click "Add default OAUth mapping"
8) Fill in "Domain" with "*"
9) Change "Allow OPAC", "Allow staff", "Auto register", and "Update on login"
to "Yes"
10) Click "Submit"
11) Click "Manage Domains" for your new Identity Provider
12) Note that "Allow opac", "Allow staff", "Auto register", and "Update on login"
are all set to "Yes"
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces a small form for an initial domain configuration
to the 'New identity provider' page, to avoid confusion on testers about
required settings for things to work.
To test:
1. Apply this patch
2. Verify you are now offered a configuration section for domain
settings. Fields like 'Default category' and 'Default library' are
mandatory.
3. Choosing some values makes them get stored on 'Submit'
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Several FIXME comments added on the report addressed here.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lukasz Koszyk <lukasz.koszyk@kit.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lukasz Koszyk <lukasz.koszyk@kit.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes the check from 'item_circ_alerts' to 'manage_item_circ_alerts'
To test:
1 - Give an account catalogue and manage_item_circ_alerts permissions
2 - Log in to staff client iwht this account
3 - Browse to Admin->Item circulation alerts
4 - Error, you do not have permission to view this page
5 - Apply patch
6 - Restart all
7 - Browse to page agian, success!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=31881
The new column was added to the table settings configuration.
To test:
* Make sure the column shows up in the columns menu of the table
in the staff interface.
* Verify it can be hidden/unhidden correctly using the menu
or the table setings.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=31881
This patch removes some obsolete code for selecting a default authorized
value category to be shown when the user first arrives on the authorized
values page. This has not been necessary since we switched to an
interface which lists all categories.
NOTE: This bug will not be reproducible if your first authorized value,
alphabetically, has no values associated with it. For instance, if you
delete all authorized values in the AR_CANCELLATION category.
To test, apply the patch and go to Administration -> Authorized values.
In the breadcrumbs menu you should see "Home -> Administration ->
Authorized values."
Clicking any of the authorized value categories in the list should take
you to a view of that category's values.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We are seeing the following lines several times in the codebase
$cache->clear_from_cache("default_value_for_mod_marc-");
But values are never set for this key.
Test plan:
Ask you, "Is the above correct?"
Use the correct 'git grep' and 'git log' and confirm the assertion.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently we only index a - but we can setup the system such that avxyz are searched
To test:
1 - define both a 655$a *and* 655$x value in a bib, save, reindex
2 - Set system preferences:
TraceSubjectSubdivisions: Include
TraceCompleteSubfields: Force
3 - View the record edited above in the opac
4 - Click on the subject heading
5 - No results found
6 - Copy zebra files:
sudo cp ./etc/zebradb/marc_defs/marc21/biblios/biblio-koha-indexdefs.xml \
/etc/koha/zebradb/marc_defs/marc21/biblios/biblio-koha-indexdefs.xml
sudo cp etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl \
/etc/koha/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
7 - restart all and reindex
8 - Click on the subject heading in OPAC
9 - Sucess!
10 - Repeat with other fields (vyz)
11 - Repeat under ES, reindexing and resetting mappings
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the following fields to the See-from index
- 450(abvxyz)
- 451(avxyz)
- 455(avxyz)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch correct a typo authtypecodes for authtypecode
To test:
1. Edit e.g. default frameworks subfield 100$a
2. Add or change fields thesaurus value
3. Save your changes
=> note that on subfield listing there is no mention that 100$a is linked to any thesaurus
=> if you edit 100$a thesaurus input is empty
4. Apply patch
5. Edit subfield 100$a and set a thesaurus value
6. Confirm it saves and displays correctly
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the following fields to the Match-heading-see-from index
- 430(adfghklmnoprstvxyz)
- 448(avxyz)
- 450(abvxyz)
- 451(avxyz)
- 455(avxyz)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds see from and see also from terms for uniform title,
chronological term, topical term, geographic name, and genre/form term
to the Match index in Elasticsearch for MARC21.
Previously, only see from/see also from for personal names,
corporate names, and meeting names were indexed.
To test:
1. Without patch, import attached authority records
1.1. Download attached records
1.2. Go to Tools > Stage MARC records for import
1.3. Click 'Browse' and choose the downloaded file
1.4. Click 'Upload file'
1.5. Choose Record type = Authority
1.6. Click 'Stage for import'
1.7. From the job details, click 'View batch'
1.8. Click 'Import this batch into the catalog'
2. Without patch, search for see from and see also from tracings
2.1. Go to Authorities
2.2. In the 'Default' drop-down menu, choose 'Uniform title'
2.3. Choose the 'Search all headings' tab
2.4. Enter the search term 'Five hundred'
2.5. Click 'Submit' or press 'Enter'
--> No results
2.6. Redo the search for the following search terms
Authority type Search term Should be found in
Uniform title five hundred 430
Uniform title films préférés 530
Chronological term fifteenth 448
Chronological term middle ages 548
Topical term lalopathie 450
Topical term troubles communication 550
Geographic name cécropia 451
Geographic name canada francophone 551
Genre/Form term filmiques 455
Genre/Form term films 555
3. Apply patch
4. Delete index, reset mappings and reindex authorities (with command line, -a -d -r)
5. Redo the searches from step 2, there should now be results
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patchset adds a new ability to save searches on the staff client, and display them in the results
page on staff or opac as a new filter.
New filters can be added from the resuilts page after a search, and there is an admin page for updating
deleting and renaming filters
There is a new permission to control management of these filters
New filters can be added that are not displayed along with facets, this allows for building custom links
using these filters to keep URLs shorter
Due to bug 30528 testing in ES is recommended
To test:
1 - Apply patches and update database and restart all
2 - Enable new system preference 'SavedSearchFilters'
3 - As superlibrarian perform a search in staff client, something broad like 'a'
4 - Note new 'Save search as filter' link on results page
5 - Click it, save search as new filter, check 'Staff client' visibility
6 - Perform another search
7 - Note the filter now appears above facets
8 - Click to it filter results
9 - Note results are limited by the new filter, and it is checked in the facets
10 - Confirm click the [x] removes the filter
11 - Go to administration->search filters
12 - Confirm the filter appears
13 - Edit and mark as OPAC visible
14 - Test OPAC to ensure it shows and can be applied/removed
15 - Copy URL with filter applied
16 - In adminsitration mark filter as not visible on staff or opac
17 - Confirm link above still works
18 - Create a new staff with catalogue and search filters permission
19 - Ensure they can access/save filters
20 - Remove filter permission and ensure they cannot
21 - Disable system preference
22 - Confirm links to search filters page are removed from admin home and admin sidebar
23 - Confirm filters do not appear on results and cannot be created
24 - Enable pref
25 - Create a filter
26 - From search filters page, click 'Edit search'
27 - Confirm you are taken to advanced search page letting you know which filter you are editing
28 - Confirm you can change searhc options and save
29 - Confirm you can perform the search from this page
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Trivial fix.
To reproduce:
1. Create or edit a rule on /cgi-bin/koha/admin/smart-rules.pl - i.e. submit the form (make POST request)
2. Notice the mentioned above warning in plack-intranet-error.log
3. Apply the patch.
4. Repeat step 1.
5. That warning in log file should be no more.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Enable SQL strict mode (koha-conf).
Modify branch, set Public to No.
Check.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The code in admin/branches.pl changed a 0 to undef which is not
desirable for booleans.
A similar fix was already present for pickup_location.
This may need a bit more thought (somewhere else!).
Test plan:
Add a new branch with pickup location No, public No.
Check.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
