Same as bug 30460 for authorities
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1 - Place 3 holds on a bib with a single item
2 - Confirm bib shows in holds queue
3 - Check in item and cnofirm hold
4 - Bib is no longer in queue
5 - Revert the waiting status
6 - The hold is in the queue again
7 - Move top hold to bottom
8 - Confirm queue selects hold for new top priorty patron
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
I suppose this is similar to circular dependency on other patch
HoldsQueue uses Circulation uses BatchUpdateBiblioHoldsQueueuse HoldsQueue
Without this the background job builds the queue, but reports failure:
Holds queue for biblio The Jacobite clans of the Great Glen, 1650-1784 /. An error occurred (Undefined subroutine &C4::HoldsQueue::GetTransfers called at /kohadevbox/koha/C4/HoldsQueue.pm line 351. )
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch deals with the fact that high-level circualtion methods like
`AddIssue`, `AddReturn` and `ModDateLastSeen` all eventually call
lower-level methods like ModBiblio, Koha::Item->store of
UpdateTotalIssues which are expected to trigger holds queue updates (for
the object CRUD operations use cases). As the circulation methods need
to trigger holds queue update as well, duplicate updates were being
requested which is suboptimal, of course.
In order to prevent this, and because circulation methdos could trigger
holds queue updates several times, actually, I added a new parameter
*skip_holds_queue* to the low-level methods, so when they are called
from circulation, the trigger is skipped and we have greater control on
when and how holds queue updates are scheduled.
This patch introduces the `skip_holds_queue` parameter to the following
methods:
* C4::Biblio::ModBiblio
* C4::Biblio::UpdateTotalIssues
* Koha::Item->store
Calls to those methods from the following methods will include the new
parameter, and thus duplicated holds queue updates avoided:
* C4::Circulation::AddIssue
* C4::Circulation::AddReturn
* C4::Items::ModDateLastSeen
Tests are added, to verify that the (mocked) BatchUpdateBiblioHoldsQueue
task is only scheduled once when they are called.
To test:
1. Apply up to the previous patch
2. Run:
$ kshell
k$ prove t/db_dependent/Biblio.t \
t/db_dependent/Biblio_holdsqueue.t \
t/db_dependent/Circulation_holdsqueue.t
=> FAIL: Tests fail!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the trigger for the holds queue update on teh following
methods:
- C4::Biblio::DelBiblio
- C4::Biblio::ModBiblio
The ModBiblio use case could be improved by checking if itemtype is one
of the updated attributes... but it felt there was no way to do it
without some overhead. So I leave it as-is.
It also mocks the ->enqueue method in the tests that call DelBiblio and
ModBiblio to avoid breakages [1]
Tests are added to check the trigger is called.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Biblio.t
=> SUCCESS: Tests pass! It means the trigger is triggered :-D
3. Sign off :-D
[1] This breakages could be avoided if we solve Koha/BackgrounJob.pm:101
FIXME.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch introduces triggers for real-time updating the holds queue at
check out and check in.
The following high-level methods are involved:
- C4::Circulation::AddIssue
- C4::Circulation::AddReturn
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Circulation_holdsqueue.t
=> SUCCESS: Tests pass! Triggers are triggered
3. Sign off :-D
Note: I put the tests on a separate file because the other one was too
big already.
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes several holds related actions schedule the background
job for real-time update of the holds queue.
This actions are:
- place (C4::Reserves::AddReserve)
- fill (Koha::Hold->fill)
- cancel (Koha::Hold->cancel)
- suspend (Koha::Hold->suspend)
- resume (Koha::Hold->resume)
The cancel() action is added a *skip_holds_queue* parameter to skip
triggering the background job entirely. It targets cases like
C4::Biblio::DelBiblio in which all biblio holds are cancelled in a loop.
In that case, we just want to cancel them and let a single backgroung
job take care of the holds queue, once the biblio is deleted.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t \
t/db_dependent/Reserves.t
=> SUCCESS: Tests pass! Triggers are triggered
3. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The CreateQueue() method deletes the holds queue data, fetches some
configuration (branches to use, transport cost matrix) and then loops
through a list of biblionumbers, generating the tmp_holdsqueue and
hold_fill_targets rows for the specified biblio.
This patch simply moves that last bit that is run inside the biblios
loop into a separate sub.
The update_queue_for_biblio sub is designed so it does the exact same
thing it did inside the loop, but also gets added the capability of
querying those parameters if not passed, and it also gets a 'delete'
parameter so it deletes the biblio-specific holds queue rows before
starting to work.
This way, it can be reused to write a background job for real-time holds
queue update :-D
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/HoldsQueue.t
=> SUCCESS: Tests pass!
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests still pass! Behavior is kept!
4. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new 'after_hold_action' hook, that is called with the
'placed' action parameter.
To test:
1. Apply the unit tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Plugins/Holds_hooks.t
=> FAIL: Boo, the hook is not called
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds an 'info' return param to CanBookBeRenewed and passes
the soonest renewal date when returning too_soon errors
To test:
1 - prove -v t/db_dependent/Circulation.t
Fix whitespace
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
GetSoonestRenewDate() calculates the renewal due date now also
correctly for auto-renewals after the fixes from bug 29476 so we don't
have to add any if-else checks because of it being buggy anymore.
To test:
1) prove t/db_dependent/Circulation.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Previously the sorting took 'chosen' into account and would move a selected match to the
top on next load - it is better to preserve the same sorting every time
When loading matches the 'cehcked' variable was not being cleared, so multiple matches were
being marked 'checked="checked"'. Fixing this ensures the correct record displays as chosen
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Ben Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patchset adds the display of all matches found during import to the import management screen
A staff member with the permission to manage batches will be able to select for any individual record which match, or none, should be used during import
To test:
1 - Import a batch of records or export existing records from your catalog
2 - Import the file (again) and select a matching rule that will find matches
3 - Note that you now have radio buttons allowing you to select a record, or none
4 - Test scenarios:
I - When 'Action if matching record found' is 'Ignore'
a - Imported record ignored if match is selected
b - 'Action if no match found' followed if no match is selected (Ignore matches)
II - When 'Action if matching record found' is 'Replace'
a - The chosen record is the one overlayed (you can edit the chosen record before importing to confirm)
b - 'Action if no match found' followed if no match is selected (Ignore matches)
III - When 'Action if matching record found' is 'Add incoming record'
a - Record is added regardless of matches
5 - Confirm 'Diff' 'View' links work as expected
6 - Confirm that after records are imported the radio buttons to choose are disabled
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Bug 22785: API files
Signed-off-by: Ben Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Also adding a similar comment in C4::Installer.
No test plan, just documentation.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Disable the possibility for a borrower to cancel a reservation
which is either in a Transit or Waiting state.
This reproduce the behaviour seen on the OPAC.
Also replaces previous checks on the borrowernumber
since CanReserveBeCanceledFromOpac already checks this.
--------------------------------
Test plan (before patch) :
-Put a reserve for a borrower
-Try to cancel the reserve providing another borrowernumber as argument
-> Should fail and reply "RecordNotFound"
-> Reserve still appears in the list of holds.
-Try to cancel the reserve providing the borrowernumber the reserve is
for.
-> Should succeed, reply with "Canceled"
-> Reserve do not show up in the list of holds for the borrower
-Put a new reserve with a pickup branch != from the homebranch
-Transfer the item to the pickup branch (reserve status = Transit)
-Try to cancel the reserve (with proper borrowernumber)
-> Should succeed, reply with "Canceled"
-> Reserve do not show up in the list of holds for the borrower
-Checkout the reserved item in the pickup branch (reserve status =
Waiting)
-Try to cancel the reserve (with proper borrowernumber)
-> Should succeed, reply with "Canceled"
-> Reserve do not show up in the list of holds for the borrower
--------------------------------
Test plan (after patch) :
-Put a reserve for a borrower
-Try to cancel the reserve providing another borrowernumber as argument
-> Should fail and reply "BorrowerCannotCancelHold"
-> Reserve still appears in the list of holds.
-Try to cancel the reserve providing the borrowernumber the reserve is
for.
-> Should succeed, reply with "Canceled"
-> Reserve do not show up in the list of holds for the borrower
-Put a new reserve with a pickup branch != from the homebranch
-Transfer the item to the pickup branch (reserve status = Transit)
-Try to cancel the reserve (with proper borrowernumber)
-> Should fail and reply "BorrowerCannotCancelHold"
-> Reserve still appears in the list of holds.
-Checkout the reserved item in the pickup branch (reserve status =
Waiting)
-Try to cancel the reserve (with proper borrowernumber)
-> Should fail and reply "BorrowerCannotCancelHold"
-> Reserve still appears in the list of holds.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When using the ./misc/cronjobs/automatic_item_modification_by_age.pl -v
after setting up rules under Tools > Automatic item modifications by
age the script outputs several lines of warnings:
Use of uninitialized value in string eq at /kohadevbox/koha/C4/Items.pm
line 1864.
This is because even when there is no condition defined, modification
rule is stored with empty hash, like :
[{"substitutions":[{"field":"items.new_status","value":"0"}],"conditions":[{}],"age":"60","agefield":"items.dateaccessioned"}]
Test plan :
1) Go to Tools > Automatic item modifications by age
2) Create a rule with no conditions, just a substitution
3) Run misc/cronjobs/automatic_item_modification_by_age.pl -v
4) Check there is no warning
5) Edit the rule to add a condition
6) Run misc/cronjobs/automatic_item_modification_by_age.pl -v
7) Check the condition is applied
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adjusts the template/profiles to use the default of '0'
This should probably be NULL, and the columns foreign keys, this code
could use a further rewrite, but this should fix a long standing bug
To test:
1 - Using the fresh install, with all the sample data.
2 - Go to Home › Tools › Patron card creator › Templates
3 - New > Card template
4 - Save
5 - Error: DBD::mysql::st execute failed: Incorrect integer value: '' for column 'profile_id' at row 1
6 - Edit an existing template
7 - Save
8 - Error: Can't bless non-reference value at /kohadevbox/koha/C4/Creators/Profile.pm line 89
9 - Create a new 'Printer profile'
10 - Save
11 - Error: DBD::mysql::st execute failed: Incorrect integer value: '' for column 'template_id' at row 1
12 - Apply the attached patch.
13 - Verify you can create a new 'Card template' and 'Printer profile' with no errors
14 - Verify you can edit and save both of the newly created objects above
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This just adds a top level set of POD headings to make the QA script
happy
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We already have 2 tables that are configurable, on acqui/basket and
reports/orders_by_budget.
This patch is modifying a bit the existing code to transfer the
responsability/logic to the KohaTable constructor instead of the
template that is creating the object.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the searchResuls code to pass through the pre-constructed branches and itemtype lookups
to XSLTParse4Display to avoid repeating this
It also updates getAuthorisedValues4MARCSubfields to fetch the values for mapped subfields and pass
then through to transforMarc4XSLT
Note that we currently blank invalid branches and itemtypes - I presrve this, we should open another bug
if we want to change this behaviour
Changes are covered by tests
To test:
1 - Perform searches in OPAC and staff client that return many records
2 - Use the 'Network' tab on the browser console (opened with F12 usually) to see the time taken
3 - Note the speed before the patch
4 - Apply patch
5 - restart all the things
6 - Note improvement in speed
**Note: The improvement is more drastic the more items per record, try adding large numbers of items to your search results to test**
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes a trivial warning caused by a parameter being
compared to a literal but not being defined. Doing a
$ git grep GetTagsLabels
shows the change is safe as the function is always called with a value
of either 0 or 1.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patchset introduces the Two-factor authentication (2FA) idea in
Koha.
It is far for complete, and only implement one way of doing it, but at
least it's a first step.
The idea here is to offer the librarian user the ability to
enable/disable 2FA when logging in to Koha.
It will use time-based, one-time passwords (TOTP) as the second factor,
an application to handle that will be required.
https://en.wikipedia.org/wiki/Time-based_One-Time_Password
More developements are possible on top of this:
* Send a notice (sms or email) with the code
* Force 2FA for librarians
* Implementation for OPAC
* WebAuthn, FIDO2, etc. - https://fidoalliance.org/category/intro-fido/
Test plan:
0.
a. % apt install -y libauth-googleauth-perl && updatedatabase && restart_all
b. To test this you will need an app to generate the TOTP token, you can
use FreeOTP that is open source and easy to use.
1. Turn on TwoFactorAuthentication
2. Go to your account, click 'More' > 'Manage Two-Factor authentication'
3. Click Enable, scan the QR code with the app, insert the pin code and
register
4. Your account now requires 2FA to login!
5. Notice that you can browse until you logout
6. Logout
7. Enter the credential and the pincode provided by the app
8. Logout
9. Enter the credential, no pincode
10. Confirm that you are stuck on the second auth form (ie. you cannot
access other Koha pages)
11. Click logout => First login form
12. Enter the credential and the pincode provided by the app
Sponsored-by: Orex Digital
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Make some new serial subscriptions and connect them to biblios that contain subtitles.
2. Do a serial search that will return your newly created subscription.
3. Notice the subtitle doesn't appear.
4. Apply patch and restart_all
5. Again try step 2.
6. Notice the subtitle appears alongside the title now.
7. Make sure it still sorts that column correctly.
Signed-off-by: shiyao <shiyao@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Make some new serial subscriptions and connect them to biblios that contain subtitles.
2. Do a serial search that will return your newly created subscription.
3. Click on one of those subscription to be taken to the subscription detail page.
4. Look at the main heading (h1) and the "Biblio:" line. Notice there is no subtitle in either place
5. Apply patch, restart_all, and reload the subscription detail page.
6. You should now see the subtitle on both the main heading (h1) and on the 'Biblio:' line.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Some libraries have certain patron categories that can only do in house checkouts via SIP self check machines.
In these cases, the items should not be demagnetized since the items cannot leave the library.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/SIP/Message.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch replaces the AutoEmailOpacUser system preference with a new
AutoEmailNewUser preference. This makes the functionof the preference
clearer.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The error pages wrote a HTTP status code of 200 for all PSGI requests, even
though it should have only done it for PSGI requests from the ErrorDocument
middleware. This patch fixes that.
0) Do not apply patch
1) Open F12 dev tools and go to Network tab
2) Go to http://localhost:8081/files/blah
3) Note that the webpage is a 404 error but HTTP status code is 200
4) Go to http://localhost:8081/cgi-bin/koha/circ/blah
5) Note that the webpage is a 404 error and HTTP status code is 404
6) Apply patch
7) Go to http://localhost:8081/files/blah
8) Note that the webpage is a 404 error and HTTP status code is 404
9) Go to http://localhost:8081/cgi-bin/koha/circ/blah
10) Note that the webpage is a 404 error and HTTP status code is 404
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Currently, on SIP checkout, Koha only returns "Patron Blocked" when there is
a problem with the patron.
This patch adds more specific informations, with the following messages:
- "Patron expired"
- "Patron debarred"
- "Patron has fines" (see system preference "noissuescharge")
- "Patron blocked" (see system preference "OverduesBlockCirc")
Test plan:
- Try to do a SIP checkout with a patron that is in one of the above situations.
- Check that the displayed message matches the patron's situation.
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a few tests to cover more cases, and to highlight current functionality.
The script only allows renewal if all outstanding holds can be filled by available items.
This means we can return as soon as we have determined that not all holds can be filled.
I add FIXME and some explanatory comments - I will file a follow-up bug for those, but
I feel we can accept these improvements to the performance and deal with the issues
of how it 'should' work versus how it does work on another report.
To test:
1 - prove -v t/db_dependent/Circulation.t
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
ItemsAnyAvailableAndNotRestricted can take a long time and create nested loops.
We can check it once per patron, however, this requires us to flip the loops.
Since an item can only be used once, we now add a check to see if this item has already
been assigned to a borrower.
To test:
1 - Find or create a biblio with 100 items
2 - Place ten 'Next available' holds on a biblio
3 - Set preference 'AllowRenewalIfOtherItemsAvailable' to 'Allow'
Set circ rules 'On shelf holds allowed' to 'If any unavailable'
4 - Checkout one of the items to a patron, backdated to be overdue
5 - Note a long loading time for the patron's checkouts
6 - Apply patch, restart_all
7 - Patron loads much faster
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch modifies the way Koha sets cookies so that the "sameSite"
attribute is explicitly set to "Lax." This option is chosen because it
is the value which is currently assumed by browsers when the sameSite
attribute is not set.
To test, apply the patch and restart services.
- Log in to the staff interface and open your browser's developer tools.
- In Firefox, look for a "Storage" tab.
- In Chrome, look for an "Application" tab.
- Under "Cookies," click the URL of the staff interface.
- You should see all the cookies which are set for that domain.
- The CGISESSID cookie should have sameSite set to "Lax."
- Go to Cataloging -> New record.
- Check the "marcdocs" and "marctags" cookies.
- Switch to the Advanced MARC editor (you may need to enable
theEnableAdvancedCatalogingEditor preference).
- Check the "catalogue_editor" cookie.
- Add a new item to an existing bibliographic record.
- Check the "LastCreatedItem" cookie which is set after you save the
new item.
- Go to Authorities -> Authority search.
- In authority search results, click "Merge" from the "Actions" menu
next to one of the results..
- Check the "auth_to_merge" cookie.
- Go to Administration -> MARC bibliographic framework
- Choose "MARC structure" from the menu corresponding to one of the
frameworks.
- Check the "Display only used tags/subfields" checkbox.
- Check the "marctagstructure_selectdisplay" cookie.
- Go to Circulation -> Check out to a patron with checkouts.
- Check the "Always show checkouts immediately" checkbox.
- Check the "issues-table-load-immediately-circulation" cookie.
- Go to Tools -> Patron clubs. You will need at least one active club
with one or more patrons enrolled.
- From the list of clubs, click Actions -> Search to hold.
- Check the "holdforclub" cookie.
- Go to Tools -> Batch item modification and submit a batch of items.
- Uncheck one or more checkboxes in the "Show/hide columns" area.
- Check the "showColumns" cookie.
- View a patron -> Search to hold.
- Check the 'holdfor' cookie.
- With WebBasedSelfCheck enabled, log in to the self-checkout page.
- Check the "JWT" cookie.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Some discovery tools can't translate ISL-DI results, it would be useful
if we can get ISL-DI output already translate.
This patch add an optional parameter language to GetAvailability, and
make GetAvailability results translatable.
If no parameter is given the output language is the language of the
cookies is present or the first language in the opac language list.
Test plan:
1. Enable the ILS-DI system preference
2. Locate a record
3. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice.)
4. Apply the patch
5. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio&language=[LANGUAGE]
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item&language=[LANGUAGE]
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice, [LANGUAGE] is a language code ex: 'en' or 'fr-FR')
6. The results should now be in the requested langugage
Sponsored-by: University Lyon 3
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The cookie created on L1496 is useless, since it is not returned.
We could either remove the cookie creation (unchanged behavior).
But since check_api_auth is expected to return a cookie when it is ok,
I opt for returning the cookie here (corrected behavior).
Test plan:
Logout in staff.
Check on staff: /cgi-bin/koha/svc/localization?id=1
You should have a 400 response.
Login with staff credentials (incl. manage_itemtypes)
Revisit same URL.
You should see a JSON response.
Check if you can hit other staff pages.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We can now use $cookie_mgr->replace_in_list instead. This
effectively removes duplicates and keeps the newest cookie.
Note: In the test plan below we are just verifying if
this patch did not change behavior. The replace_in_list
routine has been tested already in a unit test.
Test plan:
Run t/db_dependent/Auth.t
Login at OPAC.
Hit some opac and staff pages.
Perform an Advanced search on OPAC.
Check cookies in browser.
Logout.
Check cookies again. Verify with your do_not_remove_cookie lines
in koha-conf.xml.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Enable language selection and have two languages.
Change language.
Check cookie value in browser for KohaOpacLanguage.
Logout.
Verify that cookie has been cleared in browser.
Add do_not_remove_cookie line for KohaOpacLanguage in koha-conf.
Restart, flush.
Login again.
Change language.
Check cookie value in browser for KohaOpacLanguage.
Logout.
Verify that cookie still contains the language.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Reverted the change to $cookies to minimize changes.
Fixed Auth.t where checkauth is being mocked.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This subroutine was mostly the same as GetColumnDefs, we replace it
identically as in the previous patch.
Test plan:
Translate some strings in another language
% gulp po:update --lang es-ES
% cd misc/translate
# Translate the relevant strings in po/es-ES-messages.po
# For instance "Alternate contact: Surname"
% perl translate install es-ES
Select the language for the interface (enable it in the 'language' syspref
first)
Create a new guided report and confirm that the columns for the borrowers
table are translated
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
C4::Templates::GetColumnDefs can easily be replaced using the new
Koha::Database::Columns module.
Test plan:
Go to the import patron tool and confirm that you see the same list of
patron's attribute on the import patron form.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ability to do inventory by collection.
_TEST PLAN_
Before applying:
1) Go to "Tools > Inventory/stocktaking"
2) Note that there is no "Collection code:" option
Optionally:
2b) You can create a Barcode file with a single barcode
2c) Don't select anything from "Select items you want to check" (or filter if you know
how to filter to make it faster... doesn't matter)
2d) Click "Submit" at the bottom of the screen
2e) Note that there is no "Collection code" column in the screen output or CSV output
(ie with/without the "Export to CSV file" box ticked before submitting)
Apply the patch.
After applying:
3) Note that there is a "Collection code" filter on the main inventory screen
4) Create a Barcode file with a single barcode for an item with a collection
and upload it using the "Choose file" button.
5) Select that item's collection code from the "Collection code" filter
6) Click "Submit"
7) Note that the screen output and the CSV output contains a "Collection code" column
(ie with/without the "Export to CSV file" box ticked before submitting)
Signed-off-by: kelly mcelligott <kpmcelligott@gmail.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In koha interface, a warning is displayed when an item on hold is returned
only if the return is for this specific item.
This patch does the same in SIP: the return is blocked when holds_block_checkin
is enabled and there is a hold on a specific item and this is the very item
being returned.
Test plan:
The following behavior is expected in SIP:
- An item is returned, and there is a reservation on record-level: block
- An item is returned, and there is a reservation on this very item: block
- An item is returned, and there is a reservation on another item: allow
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Authority heading use is based on authority MARC 008/14-16. This could
be useful to show on authority search results, if new system preference
ShowHeadingUse is enabled.
To test:
1. Apply patches, update database, restart services
2. Go to Koha Administration -> system preferences -> searching tab.
Notice new ShowHeadingUse system preference is disabled. Leave it
disabled for now.
3. Do an authority search. Confirm it works as expected and no new
information is shown since ShowHeadingUse is disabled.
4. Do a biblio search and edit a record. Go to one of the authority
fields (1xx, 6xx or 7xx) and launch the authority finder plugin. Do an
authority search and confirm it works as expected and no new information
is shown since ShowHeadingUse is disabled.
5. Go back to system preferences and enable ShowHeadingUse syspref.
6. Repeat steps 3 and 4 but confirm the 'Heading use' column now shows, and
correctly displays what the heading can be used for based on 008/14-16.
Sponsored-by: Education Services Australia SCIS
Signed-off-by: Jessica <jzairo@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
I added explanatory text to staff interface on the preference to explain how it works
Removed a debug warn in the _get_sort_bin routine
changed comparitor => comparator
fixed a missing call in the tests
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds support for specifying the comparison operator used in
the sort bin method. It allows for more complex cases where one may wish
to sort on groups of callnumbers for example.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This bug adds the SIP2SortBinMapping to make it possible to tell
the Koha SIP2 server to include a sort_bin/CL field in the
Checkin Response, if appropriate.
To test:
- Check out an item and return it via SIP2:
$ telnet localhost 8023
9300CNterm1|COterm1|CPCPL|
09N20200422 12430020200422 124300APCPL|AOCPL|AB001|AC|
(Where 001 in |AB001| is the barcode of the item in question)
- Check there is no CL field in the last response
- Apply the patch, fill in SIP2SortBinMapping with e.g.:
CPL:itype:BK:3
- Repeat the first step
- Check the respons contains a CL field with a value of 3 (or what
you put in the config). The field should look like |CL3|
- Signe ye offe
2020-06-25: Pass an item to _get_sort_bin, not a checkout. Rebase.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
A new agefield has been added to the 'Automatic item modifications by
age' tool. The options for the agefield are: replacementpricedate, datelastborrowed,
datelastseen, damaged_on, itemlost_on, withdrawn_on
If no option is selected then Koha will default to saving 'agefield' =
items.dateaccessioned
Similarly, if a Koha instance has an old item rule without 'agefield'
defined then Koha will default to using 'items.dateaccessioned'.
This is confirmed by the AutomaticItemModificationByAge.t unit test.
Test plan:
1. Go to: Tools > Catalog > Automatic item modifications by age
2. Observe there is a new 'Age field' dropdown in the rule form.
3. Create a rule, set the values:
- 'Age in days' = 20
- Leave 'Age field' = 'Choose an age field'
- 'Substitutions': 'items.barcode' = 'test'
- Save the rule
4. Confirm the 'List of rules' page displays 'items.dateaccessioned in the 'Age field' column
5. Add another rule:
- 'Age in days' = 2
- 'Age field' = 'items.datelastseen'
- 'Substitutions': 'items.barcode' = 'test2'
- Save the rule
6. Confirm the 'List of rules' page displays 'items.datelastseen' in
the 'Age field' column for that second rule
7. Add some more rules and confirm you can delete them
8. Edit a record:
- Make the items.dateaccessioned = 3 day ago (so rule 1 is false)
- Make the items.datelastseen = 3 days ago (so rule 2 is true)
9. Run the automatic_items_modification_by_age.pl:
- sudo koha-shell <instance>
- cd misc/cronjobs
- ./automatic_item_modification_by_age.pl -v -c
10. Confirm the item has it's barcode set to 'test2'
11. Run unit tests:
- sudo koha-shell <instance>
- prove t/db_dependent/Items/AutomaticItemModificationByAge.t -v
Sponsored-By: Catalyst IT
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There are 2 prefs that control the default view of biblio detail pages:
IntranetBiblioDefaultView for staff and BiblioDefaultView for OPAC.
There are as well viewISBD, viewLabeledMARC and viewMARC to allow/don't
allow access to those page for staff members.
This code need to be in a single place to avoid discrepancy.
Test plan:
Play with BiblioDefaultView and IntranetBiblioDefaultView and confirm
that the links of biblio point to the correct view.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The following authorities subroutines are used by the ImportBatch
script but are not accessible, because they aren't imported. This
caused MARC importing errors.
- GetAuthorityXML
- ModAuthority
- DelAuthority
These affected the BatchCommitRecords and BatchRevertRecords routines,
and it wasn't caught because there are no tests written for them.
To test:
1. Find an existing authority record, or import one to use.
2. Save this authority record (export/download).
3. Go to Admin -> Record matching rules. Create a new record matching
rule for authorities that matches on 001, Local-Number index.
4. Go to Tools -> Stage MARC for import. Upload the authority file you
just downloaded.
5. Change record type to authority.
6. Under 'Look for existing items in catalog?', set the record matching
rule to the rule you just made which matches on 001. If matching
record found, replace the existing one. If no match is found, ignore.
7. Stage the record. Once complete, a match should've been found.
8. Go to Staged MARC management.
9. Import the batch into the catalog. Notice it hangs and never
completes.
10. Apply the patch and restart services.
11. Repeat steps 4-9. This time importing should be successful.
Sponsored-by: Educational Services Australia SCIS
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The last run of a report is updated only if method execute_query() is
called with report_id.
This whas missing for :
- when report is run publicly
- when report is sent by email
- when report is exported
Patch changes the method signature to use a hash of params, in order to
easily avoid some params.
Test plan :
1) Create a report.
2) Run report.
3) Check the report listing. Confirm that the last run info on the report is updated.
4) Make report public.
5) Run report via public url.
6) Check the report listing. Confirm that the last run info on the report IS NOT updated.
7) Schedule the report to run at a given time and e-mailed to an address.
8) After the report runs at the scheduled time, check the report listing. Confirm that the last run info on the report IS NOT updated.
9) Run report.
10) Export results.
11) Check the report listing. Confirm that the last run info on the report IS NOT updated AT THE TIME OF THE EXPORT.
Questionable (I don't know if this is addressed):
12) Run report on backend through a cron job and send results via e-mail.
13) Check the report listing. Confirm that the last run info on the report IS NOT updated.
14) Apply patch.
15) Rerun steps 2-13. Confirm that steps 3, 6, 8, 11, and 13 DO UPDATE the last run info.
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In C4/Reports/Guided.pm update_sql() called by test suite return warn :
Use of uninitialized value $sql in substitution (s///)
Test plan :
Run prove t/db_dependent/Reports/Guided.t and see warning disapearing
(whouchhhh)
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Also addresses QA test tools, perldoc in ImportExportFramework.pm
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch fixes the comments from Comment 29 and the import
functionality. You should now be able to import an exported file without
editing the file at all and the authority type code will be overwritten
in the file (same behaviour as biblio frameworks).
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Mazen Khallaf <mazen.i.khallaf@gamil.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch amends C4::ImportExportFramework to work for authority types as well as MARC frameworks.
New file: admin/import_export_authtype.pl
Update: Ensuring we are passing the right column to the right tables.
Update2: Making the error messages the same to be consistent with patch on Bug 15665
Update3: Fixing merge conflicts
Update4: Fixing merge conflicts and removing tabs
Update5: Getting rid of warns, making sure Import and Export of default
authority will work
Update6: Merge conflicts and making sure export of default auth type
works
Update7: Fixing merge conflicts and updating buttons to bootstrap3
To test:
1) Go to Admin -> Authority types
2) Confirm there are two new columns 'Export' and 'Import' in the table
3) Click 'Export' on an existing authority type and choose a file type, click 'Export'
4) Confirm that the authority type is exported as your chosen file type. Save the file
5) Create a new authority type
6) Import into your new authority type using the file you just exported
7) Confirm you are taken to auth_tag_structure.pl
8) Go back to Authority types
9) Export your new authority type. View the exported file and confirm
the authtypecode has been updated to match the code you set for the new
auth type
10) Click 'Import' next to any existing authority type and attempt to import a file that is not XML, CSV or ODS. Confirm that this fails and you are asked to import a file of the correct file type
11) Confirm Export and Import work for the Default authority type
12) Go to Admin -> MARC bibliographic framework
13) Confirm that the 'Export' and 'Import' functions still work here as well
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Mazen Khallaf <mazen.i.khallaf@gamil.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch simply adds a check of cached values to see if agerestriction enabled before
fetching the biblio object
To test:
1 - prove -v t/db_dependent/Holds.t
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a record has holds on it, and, using offline circulation, an item on
that is checked out to a patron that did not have a hold on the record,
the next hold that would have trapped that item will be canceled.
1) Place two bib level holds on an item for two patrons
2) Find a third patron, note his or her cardnumber
3) Create the file test.koc by copying and pasting the following into a
text editor
Version=1.0 Generator=kocTest GeneratorVersion=0.7
2008-06-11 12:24:11 547 issue PATRONCARDNUMBER ITEMBARCODE
note the fields are tab delemited, ensure the tabs do not get lost
when copying and pasting!
4) Upload the offline circ action, and commit the action
5) Note the item was checked out to the third patron
6) Note one of the other patron's holds were canceled
7) Reset your database
8) Apply this patch
9) Test again, no hold should be canceled!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When building search results for XSLT we generate and pass a list of hidden
itemnumbers.
We do skip the lost items in our parsing, however, we neglect to add the itemnumber
to the hidden list
This patch simply adds the lost itemnumbers to the list
There is more work to be done here to simpliofy this process, however, this patch resolves
the issue and can be backported to stable branches
To test:
1 - Set systempreference hidelostitems to "Don't show"
2 - Edit a record to set one item as lost and one as available
3 - Perform an OPAC search that returns the record above
4 - Note that the lost item shows in availability line
5 - Click on the record - note the lost item does not show on details
6 - Apply patch
7 - Reload search results
8 - Lost itme no longer displays
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There are several occurrences of `my $var += ` or .= in the code.
It should not cause problems but it's confusing.
Test plan:
Read the patch and confirm that the changes make sense.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
After items search result when entering a term in date due colum filter
table is not filtered.
Its is because columns from 'Issue' must be added in _SearchItems_build_where_fragment()
like it has been added in SearchItems().
Test plan :
1) Perform an item search with some results beeing checked-out
2) In colum 'Date due' enter a number that is contained is some due
dates, ie '2022'
3) Table results are filtered with items having search term in due date
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Items can now only be filtered by 'Checked out' or 'not' rather than
looking at damaged/itemlost/withdrawn/notforloan status.
Removed availability column as Checked out items are made clear by the
due date column.
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Confirm tests in t/db_dependent/Items.t still pass.
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This enhancement adds the availability of an item to the item search
results (i.e. shows if checked out or not). If checked out,
shows due date in item search results. The due
date column will also show when exporting results to a CSV file.
To test:
1) Apply patch and restart services
2) Set up two items. Check out Item A to a borrower. Leave Item B as
is not checked out, and not unavailable status.
3) Go to Search -> Item search. Scroll down and notice the Availability
radio options - Ignore, and Checked out.
4) Leave the Ignore option selected and do a search so that both items show.
5) Confirm the availability and due date columns are showing at the
right end of the table. Confirm Item A says Checked out and has a due
date. Confirm Item B says available.
6) Export all result to CSV. Confirm the results show in the CSV file as
expected.
7) Go to edit your search. Select the 'Checked out' radio option for
Availability and submit the search. Confirm only Item A shows in the
results (not Item B).
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test, the headers should have value set-cookie: secure;
for the language cookie, when the site is using https.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- Don't add an operator on first loop
- Only add plus option on last loop
- Fix indentation of first search box
- Remove spaces from operators in query_cgi and add to query and query_desc
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If there is deleted session info but no session->id, a wrong cookie
with empty name could be generated containing expired session id.
Test plan:
Run t/db_dependent/Auth.t
Login. Check cookies in browser.
Logout. Check cookies in browser.
Without this patch, you should see an invalid cookie.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This subroutine is ensuring that the biblionumber and biblioitemnumber
will be part of the MARC record.
We should not need that, unless there is something broken somewhere
else.
This line has been added by the following commit:
commit 4e95e94727
Bug 6789: biblios with many items can result in broken search results link
"""
To this end, it also moves the fix_biblio_ids portion of get_corrected_marc_record out of rebuild_zebra.pl,
and makes it a part of GetMarcBiblio (right before EmbedItemsInMarcBiblio, so the 952s still come last). fix_biblio_ids
is kept as a subroutine for the deletion portion of rebuild_zebra.pl, which still uses it.
"""
But it does not explain why it's better to have it in GetMarcBiblio.
If we need it for the reindexation process, we shouldn't impact
GetMarcBiblio which is used from several different places.
We might then consider adding the fix_biblio_ids call to
rebuild_zebra.pl, but I am failing to understand in which cases it could
be useful.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a maximum number of checkouts allowed is defined in circulation
rules, C4::Circulation::TooMany will loop over all patron's checkouts.
When a patron has several hundreds of checkouts, it can really slow down
the checkout process by several seconds (or even tens of seconds)
This patch does two things:
- Always prefetch item data so that `$c->item` does not execute an
additional SQL query at every iteration of the loop. Item data is
always needed at the first line of the loop, so there is really no
downside for doing this.
- Build the `@types` array only once, out of the checkouts loop. Since
it does not depend at all on patron's checkouts data, it does not make
sense to build it inside the loop.
Test plan:
1. Before applying the patch, create a patron with a lot of checkouts.
I tested with 1000 checkouts, but the slowness should be noticeable
with less.
2. Make sure you have a circulation rule (one that apply to your patron
and the item(s) you will check out for testing) with a maximum number
of checkouts allowed
3. Check out an item for the patron with a lot of checkouts. Measure the
time it takes.
4. Apply the patch
5. Check out another item (or check in and then check out the same item
used in step 3). Measure the time it takes and compare it to step 3.
It should be faster now.
6. Run `prove t/db_dependent/Circulation/TooMany.t`
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This is quite a misleading call.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It may be that we need a few additional flushes.
And checking the returned session before clearing busc.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If we look for an existing session, do not create a new one.
Found a bug in the unset_userenv calls. For this moment
changing the calls in Auth here. Later fix goes to bug
29954.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When a user is not logged in, a new session ID is generated every time a
new page is hit.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The ACCTDETAILS notice apparently bypasses message_queue; notices are sent directly to the linux mail queue.
Test Plan:
1) Apply this patch
2) Create a new patron with an email address
3) Note the patron's ACCTDETAILS notice shows in the patron's messages
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When system preference is off, call no code related to Koha::Recalls.
Also add some missing module import.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the different ->recalls accessors implemented on this
bug be more standard. This means:
- They don't do special things like default sorting or stripping out
special parameters. That's all left to the caller and the methods are
clean: they just return the related objects
- Useful filtering methods for Koha::Recalls resultsets are added. The
only used one (in the end) was ->filter_by_current. It seems like a
better approach, because it gives devs more control on how they want
to chain things, and there's a single place in which to maintain the
criteria of what is 'current' or 'finished'. This clearly makes the
'old' column obsolete IMHO, at least in the use cases I found. This is
covered by tests as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the status attribute an ENUM, setting the default value
as 'requested' as well. The chosen names are easier to read than single
letters. Also, renamed F into fulfilled (this impacts methods names as
well). This is because 'finished' or 'completed' is more a synonym for
old => 1...
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The fines cron job uses Getoverdues to pass issue info to CalcFine.
It took me a while to realize that the overdue hash does not contain
a biblionumber. When testing CalcFine, we pass an item hash that
does include one.
So what happened? $item->{biblionumber} is undefined when it comes from
Getoverdues and no recall overdue fine is calculated, only a regular one.
Simple fix (without any impact): Add a biblionumber to Getoverdues.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with fines.pl: recall fine applied now.
Ran some Circulation and Overdues unit tests.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- misc/cronjobs/recalls/expire_recalls.pl
- misc/cronjobs/recalls/overdue_recalls.pl
- tests for overdue fines in t/db_dependent/Circulation/CalcFine.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We are using %B to display the month name but it seems that using the
CLDR pattern LLLL would be more appropriated.
https://metacpan.org/pod/DateTime#CLDR-Patterns
%B - The full month name.
LLLL - The wide stand-alone form for the month.
For instance in Catalan:
https://metacpan.org/pod/DateTime::Locale::ca
%B will display "de gener" when LLLL will be "gener"
Test plan:
Create a new numbering pattern:
Home > Serials > Numbering patterns > New numbering pattern
Numbering formula: {X}
Label: monthname
Add: 1
Every: 1
Set back to: 1
When more than: 999
Formatting: Name of month
And test it at the bottom of the form
Locale: Catalan
The number column should contain "gener", not "de gener"
Test other locales and confirm that the output is correct (no change
expected for English, French and Spanish for instance).
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
From plack-opac-error.log:
[WARN] Use of uninitialized value $value in concatenation (.) or string at /usr/share/koha/C4/XSLT.pm line 286.
Test plan:
An opac search triggered the warning. So repeat it without warns.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Koha::Old::Checkout->anonymize takes care of checking the syspref and
raises an exception if not set. So no we can now leverage on it, instead
of checking manually and then tweaking the checkout object manually as
well.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Circulation/MarkIssueReturned.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
C4::Search->FindDuplicate joins title and author using 'and'
(lowercase). When this query is passed on to ElasticSearch, it
interprets the lowercase 'and' as a term to search for, because the
operator has to be in uppercases ('AND').
Test plan:
* Reproduce the bug:
- Set SearchEngine to ElasticSearch (and make sure you have the data
indexed etc)
- Find an existing book, note the title (245a) and the author (100a)
- Create a new book (Cataloging -> New Record)
- Fill in the same title and author using the same data as in an
existing book (and any other fields that might be required)
- Click "save"
=> A new book will be created, the Duplicate Finder has failed
* Apply the patch
* Check if it's working now:
- Create a new book (Cataloging -> New Record)
- Fill in the same title and author using the same data as in an
existing book (and any other fields that might be required)
- Click "save"
- The DuplicateFinder should now report the already exising book
Maybe we should also check if Zebra does not have any problems with the
uppercase 'AND'? In that case, repeat the above steps, but set
SearchEngine to Zebra :-)
Sponsored-by: Steiermärkische Landesbibliothek
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the original fix to only set the template parameter
for opac sessions and updates all occurences in templats to check first
for logged_in_user.branchcode before falling back to default_branch
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds support for OPAC_BRANCH_DEFAULT as an environment option
that can be passed via apache with either SetEnv or as a header for
plack. It allows setting a default branch for the anonymous opac
session such that you can display the right opac content blocks prior to
login if you have set up per branch URI's.
To test (on top of bug 29691)
1 - Add to apache conf (/etc/apache2/sites-available/kohadev.conf)
SetEnv OPAC_BRANCH_DEFAULT "CPL"
RequestHeader add X-Koha-SetEnv "OPAC_BRANCH_DEFAULT CPL"
2 - Restart all
3 - Confirm that news for all and CPL show on opac mainpage
4 - Sign in as a different library
5 - Confirm users library news shows
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Uppercase occurances of all (hopefully) lowercase "and"
used in ElasticSearch Query String Query contexts
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This doesn't rely on the other statuses, and requires only cached
preference check, so lets allow the possibiliy of an early exit
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Similar to first patch, move a count only conditionally used into
the conditional
This could be updated to use DBIC, but the itemtype conditionals
add complexity
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We essentially copy the code from GetReservesControlBranch here, because we
also calculate 'branchfield'
Setting it to "" vs undef makes no difference in this code, so lets not fetch this
again later.
Rename the variable to make it clearer where the branchcode came from
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We retrieve two counts that are only needed if rules for hold limits are defined.
The DB counts should only be fetched once the rules are confirmed to exist
Further improvement would be possiblke by allowing them to be passed in (or cached?)
from CanBookBeReserved as they rely only on patron/biblionumber and not item specific information
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This problem appeared because of this commit:
Bug 14435 Add the ability to store result's report
cf90317112
This patch fixes it by removing the third $date that wasn't removed
back then.
To reproduce:
1) Head over to Reports page.
2) Search for report by date. It should cause 500 error.
3) Apply the patch.
4) Repeat the search again, it should be working now.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If you cancel holds in bulk, the list is not updated as we enqueued the
task. But the "Update hold(s)" button will explode if clicked.
Test plan:
Place several holds on a bib record
Use the "Cancel selected" link to cancel holds in bulk
The job is enqueued and the hold list still show the holds you cancelled
Click "Update holds"
=> Without this patch you get an ugly 500
Can't call method "found" on an undefined value at /kohadevbox/koha/C4/Reserves.pm line 1060
=> With this patch applied the table is refresh, no crash (and there is
a warning in the log, that may not be necessary)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Use of uninitialized value $url_suffix in concatenation (.) or string at GIT/C4/Output.pm line 180.
Use of uninitialized value $url_suffix in concatenation (.) or string at GIT/C4/Output.pm line 197.
Use of uninitialized value $url_suffix in concatenation (.) or string at GIT/C4/Output.pm line 211.
This is in pagination_bar sub. A lot of pages call it. For me it
happened with any Authority search (authorities/authorities-home.pl)
producing multiple results.
Simple fix is initializing the variable.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch refactors the pay method in SIP FeePayment such that we
consistently pass parameters to both invocations of Koha::Account->pay.
It ensure the missing cash_register definition is passed when a set of
account lines to pay is defined.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When trying to figure out which saved SQL report caused too much load,
it's useful to have the report id show in the mysql process list.
This patch adds the saved SQL ID number as a comment line in front
of the SQL before passing it to the database.
To test:
1) Run a saved report that takes long enough time, so you can:
2) Connect to the database with your preferred client, and use
"show processlist;" to list all the running mysql processes.
3) The running saved SQL report should show up with
"-- saved_sql.id=123" in the process info field.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Use the newly introduced Koha::Object::Messages system to pass
additional information provided by object methods internally in the
objects themselves.
This patch updates the existing bespoke passing scheme to something
we've formally agreed to adopt going forward.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes the unused method.
Likely a leftover from ancient ages. AddIssue already fills the hold and
is called in the Checkout.pm library.
To test:
1. Run:
$ git grep fill_reserve
=> FAIL: Notice it is only mentioned in the line that defines it
2. Apply this patch
3. Repeat 1
=> SUCCESS: Removed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Before diving into removing ModReserveFill, I propose this:
In order to perform real-life testing of the new Koha::Hold->fill
method, this patch makes the ModReserveFill method, just call the new
one.
To test:
1. Apply this patchset
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold* \
t/db_dependent/Hold* \
t/db_dependent/api/v1/holds.t \
t/db_dependent/Reserves* \
t/db_dependent/Circulation* \
t/db_dependent/SIP/*
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
'Insert runtime parameter' has now more options for the SQL reports : 'cash register', 'debit types' and 'credit types'
Test plan:
1)Home > Reports > Create from SQL
2)Click on 'Insert runtime parameter' and notice the current options
3)Apply patch and repeat 2)
4)New parameters are now available
5)A simple SQL request to try 'credit_types' option : SELECT * FROM account_credit_types WHERE code = <<Credit types|credit_types>>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=29796
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes the flag to fetch the patrons own debts as we have already
calculated them
This test plan highlights another issue - the value of NoIssuesChargeGuarantorsWithGuarantees
is not checked in SIP code - we merely get the total owed including guarantees and compares to
noissuescharge
See bug 29755
To test:
1 - Apply first patch only
2 - prove t/db_dependent/SIP/Patron.t
3 - It fails
4 - Enable NoIssuesChargeGuarantorsWithGuarantees, you can set to 1
5 - Create/find a patron
6 - Add a $10 charge to parons account
7 - Add a guarantee to patron
8 - Add a $5 charge to guarantee
9 - Set noissuescharge to 15.01
10 - perl misc/sip_cli_emulator.pl -a localhost -p 6001 -su term1 -sp term1 -l CPL -m patron_information --patron BARCODE
11 - Note the 64 message starts with Y's that mean patron is blocked
12 - Patron shouldn't be blocked as under 15.01
13 - Apply patch
14 - Restart all
15 - repeat 10
16 - Patron is no longer blocked
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 29844 we decided to remove wantarray from Koha::Objects->search.
Reviewing the difference occurrences I found some unnecessary uses of ->as_list,
where iterators should be used instead.
This patch only removes the obvious places, not the tricky ones.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Some more cases found using
$ git grep '\->search(' | grep -v -e '\->as_list' -e '\->get_column' \
| grep '@'
and then manually looking at them.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD amended patch: remove ref to line number
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
check_cookie_auth is assuming that the user is authenticated if a cookie exists
and that the login/username exists in the DB.
So basically if you hit the login page, fill the login input with a
valid username, click "login"
=> A cookie will be generated, and the sessions table will contain a
line with this session id.
On the second hit, if the username is in the DB, it will be enough to be
considered authenticated.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the sandboxing of the selfcheckout more robust by
adding a "sco_user" session variable which is turned on when
logging into the self-checkout (either by AutoSelfCheckAllowed or manually).
If a user with this session variable turned on tries to access
other parts of the system (like the rest of the OPAC), it will
"kick out", so that the browser user will lose the authenticated session.
Test plan:
1) Apply the patch
2) koha-plack --restart kohadev
3) Go to http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
4) Note that you are logged into the self-checkout
So you see the login screen specific to the self-checkout.
To log with the actual patron. It's a nested auth.
5) Go to http://localhost:8080/cgi-bin/koha/opac-main.pl
6) Note that you are not logged into the OPAC
7) Log into the staff interface and disable the
system preference AutoSelfCheckAllowed
8) Log out of the staff interface (this step is very important)
9) Go to http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
10) Note that you are prompted to log into Koha
11) Login using the "koha" user (when using koha-testing-docker)
12) Note that you are logged into the self-checkout
13) Go to http://localhost:8080/cgi-bin/koha/opac-main.pl
14) Note that you are not logged into the OPAC
Without the patch you would still be logged as "koha"
15) Go back to http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
16) Note that you will need to log in again as you've lost your
session cookie
Without the patch you will still be logged in the self-checkout
Voila!
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch fixes tests failures due to bad checks in the controller.
The tests deserve to be rewritten.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Most of the changes here are simple, this can be read to view the changes
Testing that holds can be placed via staff client, and opac, and are disallowed
when expected is the best test plan, beyond running the unit tests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Opac: On a record(Serials) details the location wasn't displayed on the "Normal view" and "Full history" tabs
Test plan:
1)Intranet: Make sure to have at least two different Serials/Subscriptions on the same record with the field 'location' filled in
2)Opac: Find your Serials/Subscriptions
3)Click 'More details' and notice the 3 tabs : Normal view, Brief history, Full history
4)Go to 'Normal view' and 'Full history' to notice that 'location' is missing
5)Apply patch, refresh your browser & repeat 4)
6)The location is now visible
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Providing the call number for ILS-DI GetAvailability output is useful
for libraries that use discovery tools. Patrons often don't check
further for the call number, and then they don't have it when they look
for the item. It could also be use full to have this call number when
the item isn't available (to make a request for it for instance).
Test plan:
1. Enable the ILS-DI system preference
2. Locate a record with multiple items and make sure they have call
numbers for each item and that some are unavailable
3. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice.)
4. Apply the patch
5. Run the queries from step 3 again - all the results should now have
the tag itemcallnumber (not only the available's ones)
Example: <dlf:itemcallnumber>840.08 COR R</dlf:itemcallnumber>
Sponsored-by: University Lyon 3
https://bugs.koha-community.org/show_bug.cgi?id=28238
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The expiration date picked by the patron (or librarian) when placing a
hold is lost when a waiting hold is reverted.
We need a separate DB field to store this value and restore it when
needed: patron_expiration_date
The new behaviours are now:
Create a hold and specify an expiration date:
expirationdate=patron_expiration_date
Fill the hold:
expiration_date is calculated
expiration_date set to the calculated value or to
patron_expiration_date if anterior
patron_expiration_date not modified
Revert the waiting status:
expirationdate set back to patron_expiration_date
Cancel expire reserves:
if < expirationdate OR < patron_expiration_date
Note: This change should not be needed but won't hurt
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Florian Bontemps <florian.bontemps@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If you do not use a temporary self registration patron category,
you should actually make the preference
PatronSelfRegistrationExpireTemporaryAccountsDelay empty.
As the comment in sysprefs.sql already said, we should not let
a zero value in the pref delete patrons too.
The module is changed now, the test adjusted and
the description of both related sysprefs modified.
Test plan:
Run t/db_dependent/Members.t
Check in Administration the two adjusted OPAC pref descriptions.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If we simply return "no" immediately from the function when the
checkout is not an autorenewed checkout we can drop one layer of
indendation and the code becomes much easier to read.
To test:
1) prove t/db_dependent/Circulation.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The too_soon check does not relate at all to auto-renewed issues and
should be moved outside the _CanBookBeAutoRenewed() function.
To test:
1) prove t/db_dependent/Circulation.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch allows us to avoid checking reserves when the issue is
too_soon and we are running the cron
Code is covered by existing tests
To test:
1 - prove -v t/db_dependent/Circulation.t
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a checkout with auto-renewal enabled doesn't have a
"norenewalbefore" circulation rule set the code in CanBookBeRenewed()
falls back to using due date (to verify this please look for the
string "auto_too_soon" in C4/Circulation.pm), the calculation result
of GetSoonestRenewDate() however didn't do this, though luckily it was
not used in CanBookBeRenewed so we didn't get any issues
there. However, GetSoonestRenewDate() is used for displaying the
soonest renewal date in the staff interface on the circ/renew.pl page
so you would have gotten wrong results there.
This patch moves additionally the tests made for Bug 14395 under a new
subtest for GetSoonestRenewDate() as they should have been like that
already before.
To test:
1) prove t/db_dependent/Circulation.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch reuse the (awesome) Koha::Result::Boolean module to retrieve
the return of Koha::Item->safe_to_delete.
Test plan:
Try to delete an item that has previously been checked out and confirm
that you are still blocked.
Try using the cronjobs, the item and biblio detail pages, as well as the
batch delete item tool.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Set item level itypes to biblioitems.
Find a record with itemtype NULL, having an item.
Place a hold. Without this patch, it crashes.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: ThibaudGLT <thibaud.guillot@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the cataloging reservoir search results a configurable
DataTable. The empty edition and date columns are removed, and an import
data column is added.
To test, apply the patch and go to Cataloging.
- Perform a cataloging search which will return results from the
reservoir.
- The table of reservoir search results should be a DataTable with
paging, navigation, filtering, column configuration, etc.
- Confirm that all DataTable controls work correctly.
- Go to Administration -> Table settings -> Cataloging -> addbooks.
- Try modifying the default configuration and confirm that the
settings take effect.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The selector is not correct, we must to not rely on the number.
This patch fixes a regression caused by bug 28445, but also a
long-standing bug.
* Regression:
The barcode plugin is broken is autoBarcode=<branchcode>yymm0001
There is a JS error in the console:
Uncaught TypeError: form.field_value is undefined
Focustag_952_subfield_p_878344
Focustag_952_subfield_p_878344_handler
jQuery 11
BindEventstag_952_subfield_p_878344
* Long standing bug:
If there are several item forms on the same page, the branchcode is not
correctly retrieved. For instance on the "Serial edition" page there are
2 item forms, the homebranch that is used by the barcode plugin will be
the one from the last form.
Test plan:
* regression
Set autoBarcode=<branchcode>yymm0001
Catalogue a new item, click into the barcode input
Notice that without this patch you get a JS error in the console
* long standing bug
Create a new subscription, select "Create an item record when receiving this serial".
Receive a serial
Open the 2 item forms ("Click to add item")
Select 2 different home library and click the barcode inputs.
The prefix (branchcode) should be correct with this patch applied.
QA Note: it would be way easier if all add item forms were using the new
methods, it could be:
let loc = document.getElementsByName('items.homebranch')[0].value;
Yes, that's all!
Signed-off-by: Hayley Pelham <hayleypelham@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Wrong key 'xsl_filename' is present in opac-tags.pl and shelves.pl
(the only places where it is used in the code even) instead of
'xsl_syspref' that is actually used and this is the cause of those
warnings.
Also added honeypot to check if other calls in same way happens.
Honeypot probably not needed, review when QA in the Community.
To reproduce (shelves.pl):
1) Prepare some test list with items or use existing one.
2) Go to the lists page (koha/virtualshelves/shelves.pl),
notice multitude of new warnings in the "intranet-error.log" log file
that mostly have to do with "Use of uninitialized value $xslsyspref".
3) Apply the patch.
4) Go back to same page and check it again, warns like that should not
appear in the log file anymore.
To reproduce (opac-tags.pl):
1) Go to the "my tags" page in OPAC and open "tag cloud".
2) Notice a bunch of new warnings in the log file that mostly have to
do with "Use of uninitialized value $xslsyspref".
3) Apply the patch.
4) Reload the page and check the log file again.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch moves C4::Biblio::GetMarcAuthors to
Koha::Biblio->get_authors_from_MARC. This is so the method can be
used in templates and notices.
To test:
1. Find a record that has an author in the added entry field (700-720).
2. Add the record to the cart and a list.
3. View your cart and click 'more details'. Confirm authors show as
normal.
4. Click 'send' and confirm the email sent shows the authors as normal.
5. Go to the list you added the record to and click 'send list'. Confirm
the email sent shows the authors as normal.
xslt)
6. Log in to the OPAC. Find the record and add it to the cart and a list
7. View the cart and click 'more details'. Confirm authors show as
normal.
8. Click 'send' and confirm the email sent shows the authors as normal.
9. Go to the list you added the record to and click 'send list'.
Confirm the email sent shows the authors as normal.
10. Confirm tests pass:
- t/Biblio.t
- t/db_dependent/Koha/Biblio.t
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
DelSuggestionsOlderThan is on "date", a timestamp. It can be a problem
because "date" is updated when we update the database, in consequences
all the suggestions take the same date.
This patch use 'manageddate' instead.
In order to test this patch, you will need to have some suggestions
where "Managed on" (suggestions.manageddate in the database) is older
from "Last updated" (suggestions.date in the database). This can append
during some specific update. If you don't have such data, you will have
to add them via SQL request.
Example of sql for insertion (ID is the patron id of a librarian which
can manage suggestions):
INSERT INTO suggestions (suggestedby, suggesteddate, managedby,
manageddate, acceptedby, accepteddate, STATUS, title) VALUES (1,
'2020-10-13', 1, '2020-10-26', 1, '2020-10-26', 'ACCEPTED', 'title');
Test plan:
1- Choose a date and find (or add) a suggestion where:
- "Last updated" is not older than this date
- "Managed on" is older than this date
- "Status" is different from "Pending" ("ASKED" in database)
Calculate number_days = today's date - chosen date
Example: (Today's date 28/10/2021, chosen date : 28/10/2020,
number_days=365)
Suggestion | .. | Managed on | .. | Last updated | .. | Status
title | .. | 10/26/2020 | .. | 05/15/2021 | .. | Accepted
2- Run cron job
/home/koha/src/misc/cronjobs/purge_suggestions.pl --confirm --days number_days
3- Check that this suggestion has not been deleted
4- Apply the patch
5- Repeat steps 1 and 2
6- Check that this suggestion has been deleted
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
