Some scripts pass a template variable to facilitate an alternate table
row class for styling. Other use the 'IF (loop.odd)' construction. I
think we're at the point where the CSS3 :nth-child() selector is
widely-supported enough that we can do without template-based solutions:
http://caniuse.com/#feat=css-sel3
This patch adds such a selector to the staff client CSS and removes the
corresponding template markup from Administration pages. The last in
this series of patches will remove the redundant CSS.
Also in this patch: a few minor markup corrections.
To test, apply the patch and clear your browser cache if necessary. View
the following pages and confirm that alternate table row highlighting
works as before:
- Administration -> Budgets
- Acquisitions -> Vendor -> Contracts
- Administration -> Budgets -> Budget -> Planning
- Administration -> Authority types
- Administration -> Authority types -> MARC structure
- Administration -> Authority types -> MARC structure -> subfields
- Administration -> MARC bibliographic framework
- Administration -> MARC bibliographic framework -> MARC structure
- Administration -> MARC bibliographic framework -> MARC structure -> Subfields
- Administration -> Libraries and groups
- Administration -> Cities and towns
- Administration -> Classification sources
- Administration -> Circulation and fines rules
- Administration -> Currencies and exchange rates
- Administration -> Item types
- Administration -> Koha to MARC mapping
- Administration -> System preferences -> Local use
- Administration -> Z39.50 client targets
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
Load up a circulation page, note that the middle of the barcode field doesn't line up with the Check-out button.
note that the date-select tickbox is also not aligned with the rest of the things on it's line
Apply the patch
Reload the page, verify that things are now in alignment.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some vendors may have more than one contact. For example, a technical
contact and a billing contact, or a contact for journals and a contact
for monographs. Rather than require that each contact be either made
into a separate vendor or recorded somewhere outside of Koha, it would
be really useful of Koha had the ability to add multiple additional
contacts to vendors in the Acquisitions module.
To test:
1) Apply patch.
2) Edit a bookseller, making sure to add a contact.
3) View the bookseller's information, making sure the contact
information is there.
4) Run the unit test:
> prove t/db_dependent/Bookseller.t
5) Add multiple contacts to a vendor, see that they show up.
6) Delete one contact from a vendor with multiple contacts,
see that the result is correct.
7) Sign off.
Note: This test plan can supersede that on the previous two patches,
as all functionality of the previous two patches is required by this
one.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In preparation for adding the ability to handle multiple contacts, this
patch moves booksellers' contacts into their own class,
C4::Bookseller::Contact.
To test:
1) Apply patch.
2) Run database update.
3) Edit a bookseller, making sure to add a contact.
4) View the bookseller's information, making sure the contact
information is there.
5) Run the unit test:
> prove t/db_dependent/Bookseller.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
- Go to Tools > Import patrons
- Notice branchcode and categorycode don't have dropdown menus with
valid options.
- Notice dateofbirth, dateenrolled and dateexpiry don't have date-pickers
- Notice each input field is labeled with the column name instead of a
proper description.
To test:
- Apply the patch, go to Tools > Import patrons
- Notice branchcode and categorycode have dropdown menus with valid options,
and by default the empty value is selected.
- Notice that if you go into the dateofbirth, dateenrolled and dateexpiry
fields, a nice date picker widget appears.
- Notice each field is labeled with the field description, and that the
column name is conveniently shown at the right of the input field.
Important: test switching the ExtendedPatronAttributes syspref, and verify that
if enabled, the patron_attributes field appears, and also the checkbox selector
controlling the extended patron attributes import behaviour shows too.
Bonus points: Verify that on a different language, the descriptions get translated,
and the column names show correctly
Regards
To+
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Works as described, no regressions found.
Dates are output in ISO/database format, this is ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There is currently no visual feedback to the user reflecting which of
multiple installed translations is currently selected. I think some
necessary styling didn't make it into the conversion to Bootstrap menus.
This patch attempts to improve things.
Most of the changes are to bring back the previous style of highlighting
the currently selected language. A new change is the addition of the
sub-language code to the display of the menu label if one of that menu
item's sub-languages is selected.
This patch also removes some obsolete CSS which referred to the old menu
system.
To test, apply the patch and install or update multiple languages,
including at least two sub-languages. In my test I used en, en-GB and
de-DE. Clear your browser cache if necessary. Enable all these languages
and test the functionality of the language selection menu in the footer.
- Non-enabled languages should appear as non-bold links.
- When a single language (with no sub-languages) is enabled it should
appear as bold text.
- When one of multiple sub-languages is enabled that selection in the
pop-up menu should appear as bold text. The menu label should show in
bold the language code of the selected sub-language.
Tested with de-DE and de-CH, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests. No problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The notice edit view has separate sections for each of the various
message transport types. This patch groups them in a jQueryUI accordion
to simplify the view.
Also changed: Some label/id pairs have been changed to eliminate
duplicate ids.
To test, apply the patch an edit any notice under Tools -> Notices &
Slips.
- The message transport type fields for email, feed, phone, etc. should
be correctly grouped in a collapsed accordion. The acccordion should
look correct and work correctly.
- Clicking the label for any form field should correctly highlight the
corresponding field.
- Submitting updates to the notice should work correctly for all message
transport types.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described.
Something small: the top border of the uncollapsed/opened section
doesn't display correctly, but this is working a lot nicer than before,
as now changing a message requires a lot less scrolling.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When a patron has many checked out items, circulation.pl can take a very
long time to load ( on the order of minutes in some cases ). This is
primarily due to the processing of the previous checkouts list. If we
convert to this table to a datatable that fetches its data via ajax, we
can make circulation.pl far more responsive. The same should be done
with relative's checkouts as well.
Test Plan:
1) Apply this patch
2) Observe that the checkouts and relatives' checkouts tables
are now loaded asynchronously
3) Observe and verify the renew and return actions are now
ajax based and function in a manner equivilent to how they
used to.
This bug had quite a few followups, so I squashed all of them into one
change so that code is easier to follow. Original commit messages are below:
Bug 11703 - Use the ajax datatables on patron details page
Bug 11703 - Convert holds tables to ajax datatables
Bug 11703 [QA Followup 1] - Center bProcessing message over table
Bug 11703 [QA Followup 2] - Remove icons from checkout and clear buttons
Bug 11703 [QA Followup 3] - Remove references to UseTablesortForCirc
Bug 11703 [QA Followup 4] - Add back in Today's checkouts/Previous checkouts rows
Bug 11703 [QA Followup 5]
Bug 11703 [QA Followup 6] - Move strings to an include file for translation purposes
Bug 11703 [QA Followup 7] - Fix issues spotted by koha-qa.pl
Bug 11703 [QA Followup 8] - Speed up api/checkouts.pl as much as possible
Bug 11703 [QA Followup 9] - Move scripts from api directory to svc directory
Bug 11703 [QA Followup 10] - Fix errors caused by rebase
Bug 11703 [QA Followup 11] - Prevent multiple fetchs from ajax source
Bug 11703 [QA Followup 12] - Fix problem detected by koha-qa.pl
Bug 11703 [QA Followup 13] - Removed uneccessary data from renewal box during renewal
Bug 11703 [QA Followup 14] - Fix table column span
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Test plan on bug report:
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=11703#c98
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
This patch adds classes for both the facet label and count, and adds
'inline-block' to the 'facet-count' class so text shows properly.
To reproduce:
- Have facets to show some right to left text (example on the bug
report) in English language templates.
- Enable the displayFacetCount.
- Check it displays like the attached screenshot.
To test:
- Apply the patch
- Do a search that previously reproduced the problem on the staff
interface
=> Shows correctly
- Repeat for OPAC (the three themes)
=> Shows correctly
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Still work as described. Checked in Arabic with Arabic records.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Confirmed bug and that the patch fixes it, tested in staff,
prog, ccsr and bootstrap.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch moves the fixFloat jQuery plugin to
intranet-tmpl/prog/lib/jquery/plugins so that it will not be duplicated
for each set of translated templates.
This patch also includes a change to staff-global.css to override some
style the floating toolbar inherited when we added Bootstrap widgets.
To test, apply the patch and confirm that the toolbar "sticks" to the
top of the screen when scrolling down on the following pages:
- System preferences
- Authorities editor (Authorities -> New authority)
- Cataloging editor (Cataloging -> New record)
- List contents view (Lists -> View a list's contents)
Followed test plan. Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch changes the styling of the amounts of child funds
in the funds table to use a more visible indication (i.e.,
italics rather than a font color of grey) and to use a
a new CSS class, "child_fund_amount", rather than a hard-coded
style.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch upgrades the version of jQueryUI included in the Koha staff
client from v1.8.23 to v.1.10.4. The upgrade introduces a few minor API
changes which require the updates in this patch:
- In CSS, the term "active" is used instead of "selected"
- Autocomplete functions use slightly changed parameters
Changes to the default jQueryUI CSS allows us to remove some instances
of "!important" from jQueryUI-related CSS in the staff client's main CSS
file.
To test:
Testing changes to autocomplete:
- Enable the CircAutocompl system preference. Try searching in the
header's "Check out" tab. Autocomplete should look correct and
function correctly.
- In Circulation -> Overdues: The patron attribute authorized value
filter (must have patron attributes enabled, and a patron attribute
defined which uses authorized values.
- Course reserves -> Course -> Edit: Searching for an instructor
- In the unimarc_field_210c_bis.pl plugin:
1. Link the publisher name field in your MARC structure to
the unimarc_field_210c_bis.pl plugin.
2. Open a MARC record for editing and click the "tag editor" link to
launch the plugin.
3. Type the first few letters of a publisher which exists in your
database. You should get an autocomplete menu of publishers
which match your search.
4. Select one and click the "choose" button to fill the field in the
MARC editor.
- Tools -> Patron lists: Add a list or choose an existing list and add
patrons. Perform a search for a patron.
- Placing a hold: After choose a title and clicking "Place hold,"
search for a patron.
- Tags management: The sidebar filter for "reviewer" should let you
search by patron name.
Other jQueryUI widget changes:
- Check tabs appearance in header search, biblio detail, cataloging, and
circulation patron fines pages.
To confirm other jQueryUI widgets still function correctly:
- Check accordion (collapsing sections) in Patrons -> Patrons requesting
modifications and the MARC subfield structure edit screen.
- Check datepickers, especially in Circulation with the added timepicker.
Test a linked datepicker, for example in Reports -> Stats wizards ->
Circulation where the value in one date field affects what dates are
available in the matching field.
- Check the calendar interface in Tools -> Calendar
To confirm that the new jQueryUI default CSS is more flexible (fixing
Bug 11042), add the following CSS to your IntranetUserCSS system
preference and confirm that the header search active tab border color
changes (hash mark escaped so that it will appear in commit msg):
\#header_search ul.ui-tabs-nav li.ui-tabs-active {
background-color: #FFFFF1;
border: 1px solid #800000;
border-top: 0 !important;
top: -2px;
}
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Non-standard interface features have the potential to cause confusion.
This patch brings various aspects of the patron lists add page into
conformity with other staff client pages.
- Add "select all/clear all" links for the checkboxes
- Add a "remove selected" to the top of the table (see also Lists)
- Split functionality of add from from delete form
- Hide "Add patrons" button until at least one patron has been selected
- Remove non-standard trash can icon from table's checkbox column
- Exclude checkbox column from table sorting
- Add confirmation to deletion actions
- Improve breadcrumb specificity
- Add title-string sorting to date column to accommodate sorting for all
date format types
To test, apply the patch and create a patron list.
1. Search for and select patrons for the list. Selecting a patron should
trigger the display of an "Add patrons" button.
2. Click "Add patrons" and confirm that the add process completes
correctly.
3. Search for and select a patron and also check the box next to an
existing patron. Click "Add patrons" and confirm that no patron is
removed.
4. Check that the "select all" and "clear all" links work correctly.
5. Select patrons on the list and click the "Remove selected" link. You
should be prompted to confirm your choice.
4.a. Click cancel and confirm that the deletion process aborts.
4.b. Click OK and confirm that the deletion process completes.
6. Repeat step 4 with the "Remove selected patrons" at the bottom of the
page.
7. Confirm that the page title and breadcrumbs correctly show the list
name.
8. Switch between us and metric dateformat settings and confirm that
table sorting by date is correct in both cases.
Followed test plan. Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no regressions found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Local cover images do not appear in staff client search results. This
patch adds them.
To test, enable the LocalCoverImages system preference and add at least
one cover image to a title. Perform a search which will return results
that include your title. Confirm that the local cover image is
displayed.
Search results should also display correctly with and without
AmazonCoverImages enabled as well as with LocalCoverImages disabled.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The toolbar button on the Notices & Slips page isn't styled with
Bootstrap as other toolbar buttons are. This patch corrects this.
The patch also removes some obsolete CSS.
To test go to Tools -> Notices and Slips. The toolbar button should look
correct and work correctly.
Patch works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
"yui-menu-button" is not contained in tt files.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
We handle internationalization of the jQuery datepicker by adding
language configuration strings to calendar.inc which can be processed by
the translation script. This patch adds a similar configuration file for
the timepicker.
This patch also upgrades the timepicker plugin to the latest version,
minified, and places it outside the prog template directory for global
use. The path in templates has been updated accordingly.
CSS has been added to more completely hide the controls for seconds,
milliseconds, and microseconds.
To test, apply the patch and clear your cache so that the browser
loads the new version of the jQuery plugin. Confirm that date and time
selection still function correctly on the circulation page, the patron
detail page, and the offline circulation page (circ/offline.pl).
Test at least one datepicker instance which does not use the
timepicker.
Run translate update on a po file and confirm that the timepicker
strings are now present.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Works as expected, no regression found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes CSS rules that applied only to use of the
jQuery tablesorter plugin, which is now gone.
To test:
[1] Verify that git grep -l headerSort does not turn up
any results.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the renewal count to the 'Check out' and "Details' tabs
of the patron record.
This information already exists in the OPAC view of the patron record.
Since librarians might be serving patrons in person who want to know
this information without looking it up online, it makes sense to show
it in the staff client.
There may also be times where librarians want to see how many renewals
a patron has left, how many they've used already, etc. when making other
decisions.
_TEST PLAN_
Before applying:
1) Go to "Check out" with a patron that has some check outs before today
2) Add some check outs for today
*Ensure that all issues are for items that can be renewed*
3) Note that the Renew column just says '0' followed by a check box
4) Check the 'Detail' tab. It should say the same.
Apply the patch.
5) View the "Details" and "Check out" tabs again
6) Note that the renewal count now appears in the form resembling:
5 of 5 renewals remaining
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If an authority record has more than one 4xx$a (or 5xx$a) entries the
corresponding labels 'see also' and 'used for/see from' werwe repeated.
This patch removes duplicate instances of the labels, improving
readability.
To test:
- Have authority records with more than one entry on the 4xx (or 5xx)
fields.
- Do a search, check "see also:" (or 'used for/see from') appear more
than once.
- Apply the patch
- Reload and check it looks nicer :-D
- Repeat for: staff auth search, OPAC using ccsr, OPAC using prog
- Signoff
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as decribed. No koha-qa errors
Nice view on staff and both opac
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
With some staff client menus options are displayed as disabled when the
logged in user doesn't have permission to perform that function. This
patch adds Bootstrap tooltips to patron menu items with text explaining
why they are disabled.
To test, log in as a user who lacks permission to modify patrons or set
permissions. Open a patron record in circulation or patrons. Hovering
over renew, delete, and set permissions links (in the patron toolbar
"More" menu) should trigger a tooltip with a brief explanation.
Test the "Update child to adult patron" link by viewing an adult patron.
A separate patch will address catalog menu items.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
New tooltip texts are translatable, patch passes all tests
and QA script.
Tested according to test plan in Chromium and Firefox.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Use "Tax exc." rather than "GST exc." to be consistent with other parts
of the table footer. Also remove the new style introduced in the previous
patch; defining non-semantic CSS classes like font-weight-normal is not
desirable.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds call-number sorting to the staff client cart. Sortining is enabled
on the 'Items' column which uses a custom sorting routine to sort the callnumbers.
If the sort is ascending, each column will be sorted by the highest ordered
callnumber for that row. Likewise, if the sort is descending the table will be
sorted by the lowest valued callnumber for that row.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Given how easy it is to accidentally receive items from one invoice on
multiple invoices, the ability to merge invoices can be quite handy.
This patch adds that ability to Koha's Acquisitions module.
To test:
1) Apply patch.
2) Run unit test:
> prove t/db_dependent/Acquisition/Invoices.t
3) Create two invoices from the same vendor for merging, and receive at
least one order on each.
4) Do a search on the Invoices page that brings up both the invoices you
created.
5) Check the boxes next to the two invoices.
6) Click "Merge selected invoices."
7) Choose which invoice you want to keep (the default will be the first).
8) Click "Merge."
9) Confirm that the resulting invoice has all the orders you received
listed on it.
10) Sign off.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Merged several invoices sucessfully - with and without received
orders, open and closed. Works nicely.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Address the following issues:
1/ Address minor qa issues with the templates:
FAIL koha-tmpl/intranet-tmpl/prog/en/modules/circ/offline-mf.tt
FAIL forbidden patterns
forbidden pattern: intranet-tmpl should certainly
replaced with [% interface %] (line 24)
[etc.]
OK tt_valid
OK valid_template
FAIL koha-tmpl/intranet-tmpl/prog/en/modules/circ/offline.tt
FAIL forbidden patterns
forbidden pattern: intranet-tmpl should certainly
replaced with [% interface %] (line 509)
[etc.]
FAIL tt_valid
lines 5, 5
2/ Run perltidy on new scripts
3/ download.pl returns data.finished = 1 if number of returned
data < 5000 (avoids 1 ajax call)
4/ Replace qq{} around sql queries with q{}
Also, a race condition existed that resulted in pending transactions
only getting deleted from the local database in certain circumstances
(fast connections under Chrome, mostly). This patch fixes that so that
successfully-uploaded transactions are always deleted.
This patch also addresses Jonathan's suggestion:
3/ add a message on check in (currently the input becomes empty but the
user is not informed).
... and Magnus's suggestion about moving the Synchronize link to the
right on the homepage.
Also, this addresses the further issues Jonathan noted:
- The tab of checkouts always shows "*0* Checkouts"
- If I am not well-educated, I click on the "Check out" link on the
offline home page, I enter a barcode, click on "Check out" and I get a
js error (without user message): "TypeError: curpatron is undefined"
(with chromium I get: Numeric transaction modes are deprecated in
IDBDatabase.transaction. Use "readonly" or "readwrite").
- There is a "border-right" css rule on the h5.patron-title. It is
display when there is no patron selected) [really minor!].
- tables are displayed even if there is no data
- The "Clear screen" link (X) points to an old script:
circ/offline-circulation.pl
- There is a warning when clicking on the "Synchronize" link when the
user is offline, but not for the "Pending offline circulation actions"
link.
- Still exists:
> The "Checked in item." message text never disappear (even if I go on the
> offline home page (circ/offline.pl#offline-home)).
Finally, this patch adds a link to the Pending offline operations page
on the synchronize page for easier navigation.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds an HTML5-based offline mode to Koha's existing
circulation module, allowing librarians to check out items using a
basically familiar interface. The feature will be implemented using
the Application Cache and IndexedDB features of the HTML5 specification,
both of which are fully supported on Firefox 10+ and Chrome 23+, with
limited support going back to Firefox 4 and Chrome 11. The basic
workflow enabled by this patch is as follows:
Part 1: While connected to the Internet
1. Enable offline functionality by turning on the
"AllowOfflineCirculation" system preference.
2. Sync the offline circulation database on the computer that will be
used for offline circulation by following the "Offline circulation
interface" link on the Circulation home page, choosing "Synchronize (must be online)",
and clicking the "Download records" button. This process may take a while.
3. Bookmark /cgi-bin/koha/circ/offline.pl (the page you are currently
on) for easy access when offline.
Part 2: While disconnected from the Internet
4. Navigate to /cgi-bin/koha/circ/offline.pl using the bookmark you
created while online.
5. Start checking books in by scanning the barcode of an item that has
been returned into the box in the "Check in" tab.
6. Scan the barcodes of any additional items that have been returned.
7. Start checking out books to a patron by scanning the patron's barcode
in the box in the "Check out" tab.
8. Set a due date (the "Remember for session" box will be checked by
default, since circulation rules are not computed during offline
transactions and therefore a due date must be specified by the
librarian).
9. Scan an item barcode (if you did not set a due date, it will prompt
you) to check the item out to the patron.
10. If a patron has a fine you can see the total amount (current to when
the offline module was synced), and record a payment. Unlike when in
online mode, there will be no breakdown of what item(s) fines are
for, and you will only be able to record the payment amount and not
associate it with a particular item.
Part 3: While connected to the Internet
11. Click the "Synchronize" link and choose "Upload transactions" to
upload the transactions recorded during the offline circulation
session.
12. Navigate to /cgi-bin/koha/offline_circ/list.pl (there will be a
link from the Offline circulation page) and review the
transactions, as described in the documentation for the Firefox
Offline circulation plugin:
http://wiki.koha-community.org/wiki/Offline_circulation_firefox_plugin
RM note: the IndexedDB jQuery plugin bundled with this patch is
copyright 2012 by Parashuram Narasimhan and other contributors and is
licensed under the MIT license. The home page for the plugin is
http://nparashuram.com/jquery-indexeddb/.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works very well, no koha-qa errors
Test with Firefox 24.0
1) did some checkouts pre sync
2) synchronize database (Download)
3) go offline
4) Proceed to checkin some items from patron
5) Proceed to checkout items to patrons, setting date
6) Proceed to checkout to expired patron, warning appears
7) go online
8) Upload records
9) go to review transacctions and proceed
10) verified on patrons that checkin/out are done
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the ability to delete local cover images from the
detail page. It adds an 'X' button to trigger the deletion. It occurs
using a new SVC script called cover_images that accepts the following
parameters:
- action
- biblionumber (used for checking imagenumber validity)
- imagenumber (repeatable)
It then deletes all valid images passed and returns a JSON object
containing the imagenumbers and the deletion status (1/0). The operation
is triggered using jQuery.ajax, and with the response the corresponding
images get deleted.
Note: currently one image is deleted at a time, but the code is there to
be used.
To test:
- Open the detail page fr a biblionumber containing one or more cover
images, go to its images tab.
- Apply the patch, reload the page, go to the images tab.
- Thumbnails should look better than before ;-)
- An 'X' button should show below each cover.
- Clicking the 'X' button should trigger an alert message asking for
confirmation.
a) Cancel: nothing happens, reload the page and check nothing got
deleted.
b) Accept: the deleted image should be gone, reload the page to check
it doesn't exist anymore and is not a browser/DOM manipulation trick.
- Signoff
Note: check having more cover images than those that fit the width and
see it wraps fine.
P.S. I chose not to implement every possible action on the svc script, but
another bug could be filled for more improvements.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When importing frameworks the "cancel" button should be hidden once an
import is initiated since it is not possible to cancel the import in
progress.
This patch uses this bug as an excuse to replace the old import/export
pop-ups with modal dialogs for all import/export functions.
To test:
- Try exporting both the default framework and at least one other
framework.
- Try importing both a default framework and at least one other
framework.
- When importing, observe that the modal dialog controls are hidden as
soon as the import is initiated.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, passes all tests and QA script.
Also the modal works better on smaller screens.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch moves saved reports "action" links (view, edit, run, etc)
into a dropdown menu triggered by clicking an "Actions" button.
To test you must have saved reports. View the saved reports page and
click the "Actions" button in the last column of the table. This should
trigger a menu. All options in the menu should work correctly.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
works and looks awesome
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Yes, exactly what I had in mind. Great improvement.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch slightly modifies the styles of the previous/next links in a
way that I think is simpler and clearer.
To test, apply the patch and clear your browser cache if necessary.
Perform a search in the staff client, click any result, and look at the
prevous/next links.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Although previous/next browsing was added for searches in the OPAC
in 2011, the staff client has been without any sort of search browsing.
Until now. This patch is an all-singing, all-dancing, all-compatible
implementation of search browsing that will work across multiple
browser tabs and on any browser since IE7 (though the staff client
layout is broken on IE7).
To test:
1) Perform a search that will bring up multiple results.
2) View one of the results.
3) Use the Previous and Next links to browse along the search results.
4) Use the "Return to results" button to check that you end up at the
correct page of results, even if you page through more than 20
records.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch corrects more places in Koha where the path to the "prog"
theme is hard-coded in templates, CSS, and scripts.
Staff client home page:
Paths to the Koha logo background image and the module image sprite have
been corrected. Inactive and hover states of the module links
(circulation, patrons, etc) should look correct.
addbiblio.pl:
An <img> tag is replaced with a text link and an
additional CSS class. CSS uses an image-replacement technique to display
the image as before.
To test, open a blank or existing bibliographic record for editing.
Confirm that the "tag editor" icon displays correctly in two cases: 1)
tags linked to plugin editors and 2) tags linked to authorities. Both
should look correct and work correctly.
System preferences:
The system preferences editor appends a "loading" image to system
preference submit buttons when they are clicked. This patch changes
ajax.js to insert a <span> styled with a background-image instead.
To test, open system preferences and modify any preference. Submit the
change and confirm that the "loading" image appears correctly.
Background jobs:
Any place in Koha where a background job is used displays a progress
bar. This patch corrects the path in CSS to the progress bar image. To
test, perform an action which triggers the display of a progress bar.
For instance, batch modification of items. Confirm that the progress bar
image displays correctly.
blue.css:
I don't know if this is still used by anyone, but a couple of image
paths in this CSS file have been corrected.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, QA script and test plan.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch revises the staff client list contents view to better match
staff client search results, showing more information and offering more
ways to interact with the contents than before.
- List contents output has been modified so that the staff client can
use XSLT-formatted data just as the OPAC can. As in the OPAC it
depends on XSLTResultsDisplay being enabled.
- A "toolbar" has been added which is similar to that in search results,
offering the option to add items to a Cart, add them to a different
list, place multiple holds, remove items from the list, or merge
records.
- This toolbar has been made to float on scroll like the one on the
MARC edit page.
- Library and shelving location have been added to the display of call
numbers. Call numbers are linked to a search as they are in search
results.
- Edit links are included just as they are in search results.
- Automatic focus on the add by barcode form has been removed so that
the page doesn't jump to the bottom unnecessarily.
- basket.js's "addMultiple" function has been modified so that it
receives an array of checkboxes rather than looking for checkboxes in
a specific form. This helps abstract its functionality for use on both
search results and lists. results.tt is modified accordingly.
- The page layout has been widened to make room for the increased amount
of information on the page.
- A new "merge" icon has been added to the default Bootstrap sprite.
To test:
- View both public and private lists in the staff client.
- View lists with and without contents.
- Test the functionality of options in the toolbar: Add to cart, add to
lists, place multiple holds, remove items, merge items.
- Test with users with and without cataloging privileges to confirm that
catalog-related controls are correctly shown or hidden.
- Test with XSLTResultsDisplay set both to "default" and empty.
- Since the staff client and OPAC use some of the same code, test that
lists in the OPAC have not broken.
- Since JavaScript was modified which affects both lists and search
results, confirm that adding items to the Cart and Lists from search
results hasn't been broken by this patch.
Revision corrects conditional display of hold link, hiding it in cases
where there are no items or the record's itemtype is not for loan.
Also corrected is the behavior of the Cart/List "save" button in order
to prevent it from submitting the "remove items" action which is the
default for the form.
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Edit: Patch rebased against current master and hard-coded paths to
/prog/ corrected.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The jQueryUI Accordion widget, included by default in Koha, is
well-suited to handle the kind of show/hide actions which are used in
the MARC subfield editor. This patch replaces the custom-writted JS with
jQueryUI JS and markup.
To test, load the tag subfield editor: Admin -> MARC frameworks -> MARC
structure -> Subfields -> Edit. Confirm that basic, advanced, and other
contraints panels are show/hidden correctly. Confirm that tabs work, and
that edit operations are not disrupted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Looks nice, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The text inputs on the change password form are not very big, and the
default sans-serif font isn't always good for showing unambiguous
characters. This patch sets a larger, monospace font for those fields.
To test, apply the patch, clear your browser cache, and open the patron
change password form (members/member-password.pl). The inputs should be
more readable, especially the password fields when you click to fill
with a randomly generated password.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
staff-global.css contains CSS which related to the old YUI autocomplete
widget. Since this has been replaced with jQueryUI the CSS is now unused
and can be removed.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
Printing a report like overdues in Firefox results in a printout which
cuts off in the middle. I traced the cause to something in the YUI grid
system, although I'm not sure what specific definition is the cause.
This patch adds a "screen" parameter to the @import which loads the YUI
grid CSS file. This will disable YUI grid layouts in print views. The
main disadvantage to this, as far as I can tell, is that it will
"linearize" some layouts. For instance: the patron detail page
(moremember.pl) which on screen is divided into two columns. I think
this disadvantage is outweighed by the ability to make complete prints.
To test, apply the patch and clear your cache. Try printing various
reports from Firefox. Printouts should look correct and be complete.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
CSS only change, no strings involved.
Tested with a saved SQL report 'select * from borrowers'.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The budget planning table previously used a YUI menu as part of a
system for hiding and showing table columns. Instead of trying
to convert that sytem to Bootstrap I have used code from the
batch modification/deletion pages which uses a list of checkboxes
to show and hide table columns. This has the advantage of giving
the user visual feedback of what columns are hidden and of offering the
user an interface which is familiar from other pages.
This patch also moves CSS from a batch-operations-specific
CSS file into the main CSS file. Batch modification templates have been
modified accordingly.
To test, view the budget planning page and choose different
"plan by" options (by month, by library, by item type). Test
the show/hide action on each individual column and using the
"show all" and "hide all" checkboxes.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
This interface is also much more visually appealing, user-friendly, and informative than it was when it used the YUI menu.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch removes the TinyMCE library from its language-specific
location and puts it in intranet-tmpl/lib. The most recent version
of TinyMCE is used, and the files added have been limited to
those required for proper functionality of the editor.
Files omitted: documentation, examples, unused plugins.
To test, visit each page which uses the TinyMCE editor: News
editing (tools/koha-news.pl), library editing (admin/branches.pl),
and online help editing (help/edithelp.pl). The editor should
look and function as before.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
(cherry picked from commit 81714f8141de147a9133944057b059df47160315
on github.com/KohaAloha/Koha-Dev:bug_9172)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Corrected authorship and date
The circulation page, when the UseTablesortForCirc preference is
enabled, uses the old tablesorter plugin. It should use DataTables
instead.
This patch removes references to the tablesorter plugin and makes these
changes to enable use of DataTables:
- Pass two new unformatted date variables to the template from
circulation.pl so that sorting can be performed on this data.
- Add DataTables configurations for the table of checkouts and the
table of relatives' checkouts.
- Add a new plugin to the main DataTables configuration script to allow
sorting on data embedded in a <span>'s 'title' attribute.
- Add <span>s to each table with a title attribute containing the
unformatted date data which DataTables needs to perform correct
sorting. This eliminates the need for a special sorting algorithm to
accomodate various date and datetime formatting options.
- Set a template variable for checking whether circ exports are enabled.
This reduces repetition. DataTables configuration changes based on how
many columns are present.
To test, load the circulation page for patrons who match various
conditions:
- Having only checkouts from today
- Having checkouts from today and previous days
- Having checkouts only from previous days
- Having relatives who have checkouts (from today, from previous days,
from both)
Test these situations with UseTablesortForCirc enabled and disabled.
Test these situations with circ exports enabled or disabled (with
ExportRemoveFields filled or empty, for instance).
Sorting should work correctly on all columns with the dateformat
preference set to any option.
All other circulation functions should work normally.
Revision adds missing include for table footer when there are previous
checkouts and removes from empty table header cells which were
messing up auto-detection of numeric data. The global CSS for table
borders has been tightened up to improve handling of alternating row
colors in DataTables-sorted tables.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Note: Don't forget it's the checkout tab and to turn on the
preference to allow sorting there.
Also, while checkouts sorts dates correctly, sorting on the
details tabs was not always correct in my tests.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, clicking twice or more on the Save button will generate
duplicate patrons when adding patrons in the Patron module. Of course,
there is handling that detects this, so you can choose to either edit
the original record (i.e. throw away the duplicate) or create a
duplicate record.
However, it shouldn't get to that point by clicking on the Save button.
That handling seems to be there to handle cases where you go through the
whole process of trying to add a new patron only to find out that they
already exist in the system (or at least their username/password do).
--
This patch uses the "preventDoubleFormSubmit" function (which is also
used in holds and fines to prevent double form submits). It was also
necessary to edit members.js, since "check_form_borrowers" was forcing
form submits despite the "preventDoubleFormSubmit" function. I've
changed it from forcing a document.form.submit to return true, which the
browser will still submit the form if it's a unique borrower, but the
"preventDoubleFormSubmit" function will still prevent multiple submits.
I've also added a "waiting" class to staff-global.js which changes the
cursor to "wait" (i.e. loading circle graphic). I've included an
"AddClass" call in "preventDoubleFormSubmit", so that the cursor graphic
will change to show users that the page is loading so that they don't
click Save again. Of course, even if they do click save again, there
will only be one submit. However, this way - as Chris Cormack mentioned
- the user knows that "something" is happening and that the form isn't
broken.
-------
Test Plan
Before applying patch...
1) Fill out the form for a new patron in the Patron module
2) Click "Save" several times
3) Once the page loads, you'll be shown a prompt that says that this
borrower already exists. You will have the option to view the
original record, edit the original record, or create a new patron
anyway
4) Click on edit the existing record, and delete the patron
Apply the patch
5) Repeat steps 1 and 2
6) Notice that your cursor has changed into a little "loading" circle
graphic when you hover over the "body" of the page, as well as any
links or any inputs/buttons of the type "submit" within that form
7) Notice that no matter how many times you press the button, the form
is not re-submitted. Eventually you will be taken to the new patron's
record (no mention of duplication will occur)
Ta da! Multiple form submits are prevented and the loading graphic
signals to users that the form was submitted and that Koha is processing
their data
--
I understand that some people might want to change which elements are
given the "waiting" class. I'm happy to renegotiate this as necessary.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Looks good and works nicely.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds the jQuery "Validation" plugin
(http://docs.jquery.com/Plugins/Validation) and includes it by
default in the staff client along with an include file containing
translatable strings for all of the plugin's possible messages.
The staff client's main JavaScript file has been modified to perform
automatic validation of any form with the class "validated."
For a simple example I have modified the library entry form
to mark required fields as required (something which had not
been done before). Each required field has been given a class,
"required" and the HTML5 attribute "required." The former adds
the hook for the plugin, the latter adds browser-based validation
in recent browsers (and which will be superceded by the plugin
if JavaScript is enabled).
This will check for inputs classed "required" without any
additional configuration. More complex forms (with specific
data types, for instance) will require more inline JavaScript
configuration.
$("#FormID").validate({ /* configuration details */ });
Also added to the library entry form are checks on the email and URL
fields via classes ("email" and "url", respectively). This demonstrates
validation of content without forcing the field to be required.
To test, go to Administration -> Libraries and Groups and choose
"New library." Submit the form without entering a library code
or name. You should be prevented from submitting the form and be
shown an error message by each field. Perform the same check with an
existing entry.
To test browser-based validation, disable JavaScript and follow
the same procedure.
Revision rebases the patch against current master and adds missing
"//<
