The SIP2 DA field that Koha transmits is an odd and arbitrary format
that some SIP2 clients cannot handle. It would be best if this
format were customizable on a per-login basis in the same manner as
the AV field.
Test Plan:
1) Find an item that is checked out with holds
2) Return the item via SIP2 ( using the SIP2 cli emulator )
3) Note the value of the DA field
4) Apply this patch, restart your SIP2 server
5) Repeat step 2
6) Note the DA field value has not changed
7) Add this parameter to the login stanza you are using:
da_field_template="[% patron.surname %][% IF patron.firstname %], [% patron.firstname %][% END %]"
8) Restart the SIP2 server again
9) Repeat step 2
10) Note the DA field returned is now in the format "$surname, $firstname"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <BDaeuber@cityoffargo.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Removing all the id from the columns on the inserts and removing the
parameter '' of the values for the id.
Test plan:
1) Go to tools -> calendar
2) Add a Holiday only on this day.
3) Add a Holiday repeated every same day of the week.
4) Add a Holiday repeated yearly on the same date.
5) Add a Holidays on a range.
6) Add a Holidays repeated yearly on a range.
7) You should have the five calendars displayed.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
With this patch a parameter 'allow_empty_passwords="1" can be added to a
login in the SIP configuration file to allow the behaviour as was normal
before the patch for bug 16610 was applied. Some sip clients rely on
this behaviour sending an empty password field when they wish to
validate to user but do not have the password.
If a password is supplied it will be validated
A test has been added to Message.t to confirm this behaviour
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The commands in the test plan are examples, and may need varying
depending on your installation. This was created as a result
of attempting to clean the installation process up. However,
I believe the redefine might exist normally too. I just didn't
check. This is tested on a Debian 8 box sudo apt-get update'd
fully.
TEST PLAN
---------
empty error log
$ echo > ~/koha-dev/var/log/koha-error_log
drop and recreate and empty db
> drop database koha_library;
> create database koha_library;
> quit
run the web installer, but DO NOT LOG IN!
*opening chrome to Staff Client URL*
check the error log
$ less ~/koha-dev/var/log/koha-error_log
...
[Fri Jun 09 13:08:52.793627 2017] [cgi:error] [pid 5802] [client 192.168.71.101:58169] AH01215: [Fri Jun 9 13:08:52 2017] CGI.pm: Subroutine multi_param redefined at /usr/share/perl5/CGI.pm line 419.
...
apply patch
empty error log
$ echo > ~/koha-dev/var/log/koha-error_log
refresh the installation login page
recheck the error log
$ less ~/koha-dev/var/log/koha-error_log
notice no reference to "Subroutine multi_param redefined"
run koha qa test tools
Notice that it is just a require CGI; and comment added.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Due to bad use of grep syntax if there is one or more Basket Users the result of grep is not equal to 0 and the borrower is allowed.
Test plan :
1- select system preference 'AcqViewBaskets' on 'user'
2- create 2 borrowers (A, B) with only permissions on acquisition :
group_manage
order_manage
order_receive
staff
3- login with A and create a basket
4- add a basquet manager other than B
5- relog with account B
6- you can see the basket
Apply the patch.
The basket is no longer visible.
1- relog with A
2- add basquet manager B
3- relog with B
5- you must see the basket
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::Members::GetBorrowersWithEmail can be easily replaced with
Koha::Patrons->search({ email => $email });
Test plan:
Confirm that you are still able to use PKI authentication
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At this point, there should not be any occurrences of
GetReservesFromBorrowernumber anymore.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch replace the different calls to GetReservesFromBorrowernumber
with a calls to Koha::Patron->get_holds.
In some places we need to get a restricted set of holds, that's why we
process a search on this holds returned by ->get_holds (on the found
status for instance).
The changes are quite trivial and reading the diff should be enough to
catch bugs.
Test plan:
I would suggest to test this patch with patches from bug 17736 and bug 17737,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Tested both patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
At this point there should not be any calls to this subroutine.
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The C4::Koha::getitemtypeinfo subroutine did the almost same job as
GetItemTypes. On top of that it returned the imageurl value processed by
C4::Koha::getitemtypeimagelocation.
This value is only used from the 2 [opac-]shelves.pl scripts. Then it's
better not retrieve it only when we need it.
Test plan:
Play with the different scripts touched by this patch and focus on item
types. The same description as prior to this patch must be displayed.
Note that sometimes it is not the translated description which is
displayed, but that should be fixed on another bug report. Indeed we do
not expect this patch to change any behaviors.
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
TEST PLAN
----------
git grep -i getsupplierby
-- only the code removed and the test tweaked
git bz apply 18782
sudo koha-shell -c bash kohadev
prove -v t/db_dependent/Serials.t
qa -v 2 c 1
exit
-- sign off
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
We cannot LOCK the old_issues table here, other tables are accessed and DBIx::Class rename it with "me":
DBD::mysql::st execute failed: Table 'me' was not locked with LOCK
TABLES [for Statement "SELECT `me`.`issue_id`, `me`.`borrowernumber`,
`me`.`itemnumber`, `me`.`date_due`, `me`.`branchcode`,
`me`.`returndate`, `me`.`lastreneweddate`, `me`.`renewals`,
`me`.`auto_renew`, `me`.`auto_renew_error`, `me`.`timestamp`,
`me`.`issuedate`, `me`.`onsite_checkout`, `me`.`note`, `me`.`notedate`
FROM `old_issues` `me` WHERE ( `me`.`issue_id` = ? )" with ParamValues:
0='2'] at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1832.
Consequence: We could have a checkin refused if there is a race, but
this is the simplest and safest way to fix it.
Found this by inserting the same issue_id in old_issues before checkin:
The call to ->search( )->get_column is in scalar context and will
return the number of results, i.e. always 1.
If you have an issue_id 2 in old_issues, it will crash:
DBIx::Class::Storage::DBI::_dbh_execute(): Duplicate entry '2' for key 'PRIMARY'
The fix is fairly simple: Put get_column in list context and pick the first
array entry.
NOTE: Using DBIx's get_column()->max here might look simpler here.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Variable $original_issue_id is not used. The id is retrieved later from
$issue when updating accountlines.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
For more info, see:
commit be156d9ad9
Bug 15854: Use a READ and WRITE LOCK on message_queue
and
commit b40456f7dd
Bug 18364: Do not LOCK/UNLOCK tables from tests
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
If the "max(issue_id) from old_issue + 1" already exists in issues, the
move fails.
For instance we have
1, 2, 3, 4 in issues
checkin 4
1, 2, 3 in issues (AI=5)
4 in old_issues
Restart mysql => AI is reset to MAX(issue_id) => 4
checkout a new one
1, 2, 3, 4 in issues (AI=5)
4 in old_issues
checkin 4 (will get id 5 in old_issues)
1, 2, 3 in issues (AI=5)
4, 5 in old_issues
=> This works with and without this patch
Now we have
1, 2, 3 in issues (AI=5)
4, 5 in old_issues
Restart mysql => AI is reset to MAX(issue_id) => 4
checkout 2 new ones
1, 2, 3, 4, 5 in issues (AI=7)
4, 5 in old_issues
checkin 4 (4 becomes 6 in old_issues)
1, 2, 3, 5 in issues (AI=6)
4, 5, 6 in old_issues
=> This did not work without with patch
The update of the issue_id was made before the move (so in the issues
table), the PK did not allow it
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
2. If the move fails for whatever reason (see
https://lists.katipo.co.nz/pipermail/koha/2017-May/048045.html for an
example), fines can be charged. It should not
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
1. AddReturn returns a $issue hashref with the old issue_id value
=> At first glance it does not affect anything, but would be good to fix
it for future uses.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
GetFictiveIssueNumber:
Returns undef instead of 0 for irregular frequencies. Also added to POD.
Removed unused variable $wkno.
Adding a return makes the if(unit) unneeded.
Replaced (a+b)/b by 1+a/b.
_delta_units:
Added a comment about its parameters.
GetFictiveIssueNumber.t:
Adjusted the tests for irregular frequencies accordingly.
Test plan:
[1] Run t/db_dependent/Serials/GetFictiveIssueNumber.t
[2] Run t/db_dependent/Serials/GetNextDate.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The changes in _get_next_date_day are actually only cosmetic. The sub
now reads exactly the same as its counterparts for other units, but
the results are exactly the same as before.
In GetFictiveIssueNumber we now call _delta_units for each type of unit.
The two Delta_Days calls are moved to _delta_units. Note that this also
is a cosmetic change; results should be exactly the same.
Test plan:
[1] Edit a subscription. Test predication pattern for some daily freq.
[2] Run t/db_dependent/GetNextDate.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same solution applied as in bug 18356/18607. Consistency++
The code in _get_next_date_week is again very similar to the code in
_get_next_date_month or _get_next_date_year. I will not merge them here,
but we could consider that in the future.
Code in GetFictiveIssueNo has been adjusted similarly to month and year.
Test plan:
[1] Do not apply this patch. Create a subscription for 3/week.
When the first issue date is on a Saturday or Sunday, the
intervals in the prediction pattern are 0,0,7,0,0,7,etc.
Starting on Wed-Fri 1,1,5,etc. Starting on Mon-Tue 2,2,3,etc.
[2] Apply this patch. Check again.
The interval should be always 2,2,3 now and no longer depend on the
day_of_week of first issue date.
[3] Check another weekly frequency with multiple units per issue.
Say 1 issue/3 weeks.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Similarly to the solution of bug 18356, this patch fixes the date
calculation for monthly frequencies.
The calculation in GetFictiveIssueNumber now makes use of the new
_delta_units sub introduced on bug 18356.
The calculation in _get_next_date_month is also very similar to the one
in _get_next_date_year. I do not merge them here, but this could still
be considered later on. At least consistency is achieved now between
both routines. The connection with firstacquidate has been cut thru
just like for year units.
Test plan:
[1] Without this patch, look at the prediction pattern for a
subscription with first issue on Feb 21 and 5 per month. The first
issues will be 21, 22, 23, 24, 25. Then jumping to 21, 23, 25, etc.
[2] Apply the patch. Look at the same prediction pattern. You will now
see 6 day intervals and a new cycle starting on the 21st.
So Feb 21, 27, Mar 5, 11, 17 and Mar 21, 27, etc.
[3] Edit an subscription. Try a few other monthly frequencies.
[4] The next patch adjusts related unit tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The problem as described on BZ 18356 is a combination of an error in
GetFictiveIssueNumber and GetNextDate for unit==year.
[1] In GetNextDate the Add_Delta_YM calculation should be applied only to
frequencies based on years per unit.
In the case of multiple units per year we calculate the number of days to
add. And if we have reached the end of a cycle, we correct the
rounding applied in the cycle.
NOTE 1: We obsolete the idea here of rebasing dates on firstacqui. In case
of manual adjustments, we probably do not want it. And otherwise we do not
need it anymore due to the correction at the end of a cycle.
NOTE 2: The calls to Add_Delta_YM are intentionally not corrected for leap
years. Say you start at 2016-02-29. If you use 1/yr or 1/2yr, you will
switch to the Feb 28th in the following years. In 2020 there will be no
switch to Feb 29 again; if someone should need it, please use a manual
adjustment. This is probably highly exceptional.
[2] In GetFictiveIssueNumber the year should be decreased by one if you
have more units per year and you did not yet reach firstacqui day and
month. This affects calculations in GetNextDate with irregularities.
NOTE 1: I added a wrapper around Date::Calc::N_Delta_YMD in order to improve
its results; this will especially be needed when we use it later for
month units.
NOTE 2: In case of manual adjustments this calculation does not really make
sense. Another report should deal with improving irregularities.
Test plan:
[1] Verify that both GetNextDate.t as well as GetFictiveIssueNumber.t pass.
[2] Look at the prediction pattern for a few frequencies.
For example: 1 iss/y, 1 iss/2y, 5 iss/y.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The today parameter is properly handled from C4::Letters subroutines, we
do not need to pass it from callers.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Here we need to test <<today>>.
We already pass a value, but it was wrong. We must pass a string, not a
DateTime object, otherwise the KohaDates plugin will not display the
hours part if we need it.
Test plan:
Define a HOLD_SLIP notice template to match your need.
Do not forget to use
[% today | $KohaDates %]
or
[% today | $KohaDates with_hours => 1 %]
To access data from the reserves table, use the 'hold' variable
Tested both patches together with several date formats, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This notice template have the particular feature of using <<count>>.
This value is substitued during the process of the notice template.
For the TT syntax, all what we need is to send the values to substitute to the
template.
Note that items.content can also be used in these template, you can have
a look at bug 17967 to see a better alternative to this marker.
Test plan:
Generate DUEDGST and DUE notice messages.
You should be able to generate the same messages with the TT syntax.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::ImportBatch::GetBestRecordMatch uses SQL to sort by score descending
then candidate_match_id descending. With C4::Matcher::get_matches, I
implement the same sort but use Perl code to do it, since we're sorting
search results.
It's a simple change, but it's in a big block of code, so I don't have
unit tests.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Upgraded systems may be lacking sms_send_config which makes t/SMS.t noisy.
This silently bypasses the problem.
Remove sms_send_config from your koha-conf.xml file
prove t/SMS.t
-- it will be noisy, but pass.
apply patch
prove t/SMS.t
-- noise gone.
run koha qa test tools.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Works correctly as indicated by the testing plan.
No "uninitialized" noise after patch is applied.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Slightly amended: turned the iif around.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the TRUNCATE statement in ModOAISetsBiblios by a
DELETE statement. A truncate will cause an implicit commit and will
therefore commit the transaction started in the test script.
Also simplifying the module load in the test script.
Test plan:
Do not apply this patch and observe that biblio records are added to your
database by running t/db_dependent/OAI/Sets.t.
Apply this patch, run the test again and verify that it does no longer
add records to your biblio table.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Removed trailing spaces at line 182 of C4::Accounts.
Test plan:
1. Edit C4/Accounts.pm and verify trailing spaces
2. Apply patch
3. Verify that trailing spaces in C4/Accounts have been removed
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At this point this subroutine is only used once, from reserve/request.pl.
Since we already have the items, it's easy to populate the different
hashes as the rest of the code is expecting it.
Test plan:
You need to create analytical record relationships (
EasyAnalyticalRecords needs to be set). Link an item to a biblio using
the 'Edit > Link to host item' menu from the biblio detail page.
From the staff interface place a hold on the biblio. You should see the
items from the biblio and the one you just linked
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Fix regular expression to do what is described in the comment
Make header in CSV profile definition optional
Strip white chars from csv profile definition
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch allows the user to use a CSV export profile to create the fields to export the basket as CSV in a basket page.
Test plan:
1) Apply the patch
2) Go to Tools › CSV export profiles and create a profile of type "SQL for basket export in acquisition"
example:
biblionumber=biblio.biblionumber|auteur=biblio.author|titre=biblio.title|date=biblioitems.copyrightdate|editeur=biblioitems.publishercode|isbn=biblioitems.isbn|quantite=aqorders.quantity|prix=aqorders.rrp|panier=aqorders.basketno
3) In acquisition module, create a new basket and add an order to the basket
4) On basket detail page, there should be the split button labelled "Export to CSV"
5) Try to use the button and export CSV with your CSV profile you defined in step 2
6) Validate the CSV file.
7) Repeat 4-6 with a closed basket.
a) close the basket
b) View the basket
c) validate that there is an export button
d) test it with an export
8) prove t/db_dependent/Acquisition/GetBasketAsCSV.t t/db_dependent/Koha/CsvProfiles.t
Initial work:
Sponsored by: CCSR
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: mehdi <mehdi.hamidi@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In acquisition, several templates try to display publisher code and publication year : invoice.tt, parcel.tt, transferorder.tt.
Thoses pages use C4::Acquisition methods GetPendingOrders or GetInvoiceDetails.
The bug is that in the SQL query of those methods, biblioitems.publishercode and biblioitems.publicationyear.
In uncertainprice.pl those datas are fetch using GetBiblioData.
It whould be better to fetch them in GetPendingOrders and GetInvoiceDetails.
This patch changes SQL queries to fetch wanted datas : aqorders.*,biblio.title,biblio.author,biblioitems.isbn,biblioitems.publishercode,biblioitems.publicationyear. GetInvoiceDetails also needs : biblio.seriestitle,biblioitems.volume.
This patch also unifies the way biblio datas are displayed :
<a href="link to catalog using biblionumber">[title]</a> <em>by</em> [author] – [isbn]
<em>Publisher:</em> [publishercode], [publicationyear]
Test plan :
- Choose a biblio record containing a data in :
biblio.title,
biblio.author,
biblioitems.isbn,
biblioitems.publishercode,
biblioitems.publicationyear,
biblio.seriestitle,
biblioitems.volume.
- Create an order using this biblio.
- Look at this order in pages : parcel.pl, transferorder.pl, uncertainprice.pl
=> You see publisher code and publication year
- Look at this order in page : invoice.pl
=> You see publisher code, publication year, series title and volume
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The JOIN done by this subroutine are not always useful (depending on
item-level_itypes). They also search with LIKE when it is not needed.
Since we have now Koha::Items, we can replace this subroutine with a
call to Koha::Items->search with the correct parameters.
A change in previous behaviours can happen: If a items.itemlost contains
a value that is not defined as a LOST authorised value, the item will
not be displayed. I think it's the expected behaviour, even if it should
not happen in correctly configured installations.
Test plan:
To test with item-level_itypes set to item and biblio:
List the lost items you have on your system, using the different
filters available.
The result table should contain the correct item's info.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The code from scripts and subroutines using this subroutine was not very
elegant. Most of the time the code was unnecessarily complex.
This patch removes this subroutine and adapt the code to use
Koha::Items instead.
1. C4::Items::get_hostitemnumbers_of
I did not understand why the code was so complicated, it seems that we
only want to know if a given item has a given biblionumber
2. cataloguing/merge.pl
We want to retrieve the itemnumber for a given biblio.
We could also have done that with:
Koha::Biblios->find( $biblionumber )->items;
3. labels/label-item-search.pl
We want to loop over the items for a given biblio, no need to use
get_itemnumbers_of and GetItemInfosOf.
We just need to use:
Koha::Items->search({ biblionumber => $biblionumber })
4. reserve/request.pl
We want to retrieve the itemnumbers of the biblio's items
We could also have done that with:
Koha::Biblios->find( $biblionumber )->items->get_column('itemnumber');
Test plan:
1.You need to create analytical record relationships (
EasyAnalyticalRecords needs to be set). Link an item to a biblio using
the 'Edit > Link to host item' menu from the biblio detail page.
From the staff interface place a hold on the biblio. You should see the
items from the biblio and the one you just linked
2. Merge two bibliographic records (with items), the resulting record
should contain items from both original records
3. Create a new label batch, edit it.
Add items to this batch ('Add items' button).
Fill the input with a barcode.
You should see all the items of a biblio.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is no longer in used.
It was previously call from serials/serials-recieve.pl, which was not used and has been removed by
commit 65b7ad030c
Bug 13423: Remove unused serials-recieve
Test plan:
git grep GetItemLocation
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Comparing the perldoc to the function:
- basketname
- basketgroupname
- budget_id
Were missing. This adds them.
Also, a description of ordernumber and search were
added, as they are not self-evident by their name
alone.
There are no code changes, so all tests should pass
or fail identically before and after patch.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed typo basetgroupname
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Problem raised by bug 17762: IssueSlip should return if the params are
not valid.
The tests contain 2 FIXME to highlight this problem already, it's time
to fix them.
Note that, theoretically, this change may produce software error. Indeed
the caller expecting a hashref (letter) will access the "content" key.
But that should not happen.
Test plan:
Tests must return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Make it more explicit by adding join statements.
Test plan:
See next patch for adding a unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Import a batch with some items
2 - Delete one of the imported items
3 - Browse to Tools->Staged MARC record management
4 - Click (Create label batch) for the batch you imported
5 - Recieve an error
6 - Apply patch
7 - Click (Create label batch)
8 - Batch is created with remaning items from the import
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Make sure to build necessary letters
Fix awkward construction
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It seems that for HOLD and DUE (and maybe more) notices we rely on
C4::Letters::SendQueuedMessages
to populate the correct address.
This patch adjust that subroutine to correctly populate the field and/or
fail messages if no SMS provider available
To test:
1 - Define a messaging prefs for a patron to recieve hold notices via
SMS
2 - Ensure you have defined an SMS message for 'HOLD' letter
3 - Set an SMS alert number for patron
4 - Set the SMS::Send driver to 'Email'
5 - Fill a hold for the patron
6 - Check the db and note the address is null
7 - run process_message_queue.pl
8 - Check db - address is null and message pending
9 - Apply patch
10 - run process_message_queue
11 - Message to_address should be populated and message sent
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17196 move the marcxml out of the biblioitems table.
That will break SQL reports using it.
It would be handy to propose an automagically way to convert the SQL
reports.
We do not want to update the reports automatically without user inputs,
it will be too hasardous.
However we can lead the user to convert them.
In this patchset I suggest to warn the user if a report is subject to be
updated.
TODO: Add a way to mark this job done (using a pref?) to remove the
check and not to display false positives.
Test plan:
- Create some SQL reports (see https://wiki.koha-community.org/wiki/SQL_Reports_Library)
- Go on the report list page (/reports/guided_reports.pl?phase=Use saved)
- For the reports using biblioitems.marcxml you will see a new column
warning you that it is obsolete
- Click on update link
=> that will open a modal with the converted SQL query
- Click on the update button
=> you will be informed that the query has been updated
If all the reports are updated, the new column "Update" will no longer
be displayed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
