This patch adds a new circulation rule (no_auto_renewal_after) to block/allow
auto renewals after a given delay.
For instance, if the issue date is 10 days before today, and
no_auto_renewal_after is set to 10, tomorrow the issue won't be auto
renewed.
Test plan:
0/ Execute the update DB entry
Note: You will have to manually change data in your DB, make sure you
have access to the sql cli.
1/ Define a rule with no_auto_renewal_after (10 for instance) and
norenewalbefore (5 for instance).
(This new rule will behave the same as norenewalbefore: the unit depends
on the lengthunit value).
The automatic renewals will be done from 5 to 10 days ahead.
2/ Modify the issues.issuedate, to simulate a checkout in the past:
UPDATE issues
SET issuedate = "yyyy-mm-dd hh:mm:ss"
WHERE itemnumber = YOUR_ITEMNUMBER;
with issuedate = 2 days before for instance
3/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has not been renewed (too soon)
4/ Repeat step 2 with a due date set as 11 days before
5/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has not been renewed (too late)
6/ Repeat step 2 with a due date set as 7 days before
7/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has been renewed (issues.renewals has been
incremented and date_due has been updated according your circ rules).
Sponsored-by: University of the Arts London
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces sql queries done in some pl script and in
C4::Reports::Guided.
Since we have now a Koha::Patron::Categories module, we should use it
where it is possible.
Test plan:
- Prerequisite: Be sure you have several patron categories created, with
different option enabled, and limit some to certain libraries.
- On the 'Circulation and fine rules' admin page (admin/smart-rules.pl),
all the patron categories should be displayed (even the ones limited to
another library), ordered by description. Try to add/update existing rules.
- On the overdue rules page (tools/overduerules.pl), all the patron
categories with overduenoticerequired set should be displayed.
Try to add/update existing rules.
- On the following reports:
reports/borrowers_stats.pl
reports/issues_avg_stats.pl
The patron categories should be displayed. Note that there is an
inconsistency with these 2 reports: the patron categories limited to
other libraries are displayed on them, when they are not on the other
reports. This should certainly be fixed (on another bug report).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
This patch introduces the CRUD UI for managing the refund lost item fee
rules on the general 'Circulation and fines rules' page.
Verify that rules can be added and changed.
Rules are correctly associated to the chosen branch (or the
general default rule).
To test:
- Apply the patch
- Open smart-rules.pl
=> SUCCESS: The text and refund rules section correctly refers to default global rules.
The policy can be set to Yes and No, and works as expected.
- Pick a specific branch
=> SUCCESS: The rule refers to the specific branch
=> SUCCESS: It detects the default rule is picked
=> SUCCESS: On changing the rules values are correctly retrieved if entering
again to the page.
=> SUCCESS: The 'Use default' text is suffixed with the correct value set by the user
in the 'All libraries' scenario.
=> Sign off :-D
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Some libraries would like to be able to limit hold filling to items that
match the pickup library for a hold based on the item's home or holding
library. The patron's home library should not affect whether a patron
can place the hold, instead the hold will only be fillable when an item
matching the pickup location becomes available.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the new "Hold pickup library match" rules for "checkout, hold,
and return policy" and for "holds policy by item type"
4) Set the policy to "item's holding library"
5) Place a hold where the item's holding branch does not match
the pickup branch
6) Check in the item
7) Note it is not trapped for the hold
8) Update the item's holding branch to match the pickup branch
8) Check in the item
9) Note the item is trapped for the hold
10) Repeat steps 4-9 but for home branch instead
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
When editing circ rules, if the Loan period "issuelength" is not defined
(empty string), the default value was 0, not it's inserted in the DB as
NULL.
Test plan:
1/ Create or edit a circ rule
2/ Do not fill the Loan period column
3/ Save
=> Without this patch, the value was 0
=> With this patch it's now an empty string (in the DB it's set to NULL)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described.
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15354 did not fix correctly the issue with the item type display.
The default item type '*' should be "All", at the moment nothing is
displayed in the column.
Test plan:
1/ Define a rule for default item types (All/*) and for specific item
types.
2/ Translate some item type descriptions used in previous step
3/ Default item type should be "All" and correct translations should be
displayed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
In bug 14100, the admin/smart-rules.pl needed much more love.
Indeed, the translated_description string should be used everywhere and
replaced the previous 'humanitemtype'.
Test plan:
1/ Translate some item types.
2/ Define some holds policy using these item types.
3/ Update the template strings
4/ Confirm that the "holds policy by item type" are displayed (for the
default and specific library) and sorted by translated item type descriptions.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Passes QA tools.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
To reproduce:
Go on the admin circ rules page (admin/smart-rules.pl), switch the
dropdown list from specific to "all libraries".
The rules are not displayed anymore.
Test plan:
Apply this patch and confirm that the rules are now displayed correctly.
Make sure the enh introduced by bug 11625 is not broken.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Test plan:
1. Make sure that in koha/admin/smart-rules.pl you can still create
new rules and that the new rules have all their values remained
after saving the rule (so put to every field something).
2. Make sure you can edit that rule
3. Make sure you can delete that rule
Sponsored-by: Vaara-kirjastot
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch adds the ability to set the maximum fine for a given item to
its replacement price ( assuming the replacement price is set ). If
overduefinescap is also set, the fine will be the lesser of the two, if
both apply to the given overdue checkout.
To enable this new limit, create or edit your circulation rules and
check the checkbox for "Cap fines at replacement price"
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Pick an item, and set it's replacement price to 3.99
4) Edit the circulation rule that would apply to this item
and the patron you will check it out to.
5) Check out the item to the patron, and backdate the due date
such that the fine generated would be more than 3.99
6) Enable CalculateFinesOnReturn
7) Return the item, and view the fine generated, it should be 3.99
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch set makes the default circ rules and notices/slips to edit
the logged in branch, if one is set.
Test Plan:
1) Apply this patch
2) Log into staff side, and set your library
3) Browse to Administration/Circulation and fines rules
4) Note the rule set selected is for your library
5) Select "All libraries"
6) Note the rule set selected is for "All libraries"
7) Browse to Toos/Notices & slips
8) Note the notice set selected is for your library
9) Select "All libraries"
10) Not the rule set selected is for "All libraries"
11) Click "New Notice"
12) Note the Library field is set to "All libraries"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If no value for 'no renewal before' is specified, automatic renewal now
falls back on the due date. Also 'no renewal before' can now be zero, so
both automatic and manual renewals can be delayed until due date.
Test plan:
1) Create some circulation rules with different settings for 'No renewal
before' and 'Automatic renewal'. Both daily and hourly loans should
work.
2) Try to renew both manually and automatically before and after a renewal
should be possible. You can run misc/cronjobs/automatic_renewals.pl for
automatic renewal.
3) Confirm that:
* Both automatic and manual renewal with 'No renewal before' set
to 0 do not happen before the due date (exact DateTime).
* Manual renewal with 'No renewal before' set to undef (enter empty
string) is unrestricted.
* Automatic renewal with 'No renewal before' set to undef does not
happen before the due date.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This has been introduced by bug 14949, recently pushed.
So I don't think we need to update the DB, only devs will face this
problem.
The hardduedate was inserted as 0000-00-00 because was en empty string.
To be inserted as NULL, the value should be undef.
Test plan:
0/ Don't apply this patch
1/ Edit a circ rules and don't fill the hard due date
2/ Look at the DB, the value is 0000-00-00
3/ Apply this patch and confirm that the value is now NULL
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Confirmed
+--------------+----------+-------------+
| categorycode | itemtype | hardduedate |
+--------------+----------+-------------+
| * | * | NULL |
+--------------+----------+-------------+
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the regresseion as described in comment #3
To test:
- Go on smart-rules.pl and edit a line. Do not define a Hard due date, save.
The value is "None defined".
- Edit the line, do not change anything and save.
The value should be "None defined"
- Edit the line, define a hard due date, save.
The date should display as expected.
- Edit the line agein, remove the hard due date, save.
The value should be "None defined"
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug to remove C4::Dates from
- admin/smart-rules.pl
- admin/categorie.pl
To test:
- Apply patch
- Go to Home > Administration > Circulation and fine rules (smart-rules.pl)
- Edit or add a rule
- Verify that 'Hard due date' displays and saves fine
- Go to Home > Administration > Patron categories
- Edit or add a category
- Verify that 'Until date' displays and saves fine
Note: The date picker does not warn about wrong date formats as e.g. while
editing patrons, but that is not in the scope of this bug
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now, Koha only charges fines at the end of a given charge period.
For example, let us assume a circulation rule has a charge period of one
week ( 7 days ) and a fine of $5. This means that an item can be overdue
for 6 days without accruing a fine. Koha should allow circulation rules
to be configured to place the charge at the start of the end of the
charge period so the library can decide when the fine should accrue.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) prove t/db_dependent/Circulation_Issuingrule.t
4) prove t/db_dependent/Circulation.t
5) prove t/db_dependent/Fines.t
6) Ensure you can still create/edit circulation rules
Edit: I removed the DBIx changes after a couple minutes fighting with them.
Will regenerate as usual in a RM followup / Tomas
Signed-off-by: Daniel Grobani <dgrobani@samuelmerritt.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the new fields maxonsiteissueqty as a copy of the
existing maxissueqty field.
There is no brainy code here, it only adds the ability to fill the new
field from the admin interface (admin/smart-rules.pl).
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Reserves:
* Added OnShelfHoldsAllowed() to check issuingrules
* Added OPACItemHoldsAllowed() to check issuingrules
* IsAvailableForItemLevelRequest() changed interface, now takes
$item_record,$borrower_record; calls OnShelfHoldsAllowed()
opac/opac-reserve.pl and opac/opac-search.pl:
* rewrote hold allowed rule to use OPACItemHoldsAllowed()
* also use OnShelfHoldsAllowed() through
* IsAvailableForItemLevelRequest()
templates:
* Removed AllowOnShelfHolds and OPACItemHolds global flags, they now
only have meaning per item type
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
I have tested this patch left, right and upside down for the last
several months. All tests have passed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a column "Automatic renewal" to the circulation and
fine rules table.
To test:
1) Add or edit some issuing rules.
2) Confirm that "Automatic Renewal" is set to "No" by default and
can be switched to "Yes".
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new issuing rule: maxsuspensiondays.
A new column "Max. suspension duration (day)" appears in the main table
of the issuing rules.
If this value is filled, on returning an item, a patron won't be
suspended longer than this cap.
Test plan:
1/ Set "suspension in days" to 2.
2/ Check an item out to a patron and specify a due date to today - 10
days.
3/ Check the item in and verify the patron is suspended until today + 10
* 2 days.
4/ Remove the suspension.
5/ Set "Max. suspension duration" to 10.
6/ Check an item out to a patron and specify a due date to today - 10
days.
7/ Check the item in and verify the patron is suspended until today + 10
days.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch ensures both both '0' and strings consisting of zero
or more blanks are recognized by the circ rules editor as specifying
clearing the "no renewal before" value. Concretely, this fixes
warnings of the following form when clearing this field:
Argument "" isn't numeric in numeric eq (==)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a column "No renewal before" to the circulation and
fine rules table.
To test:
1) Add or edit some issuing rules.
2) Confirm that an empty entry, zero and non-numerical values for
"No renewal before" are saved as undefined.
3) Confirm that numerical values can be entered and saved.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Renew an issue for a number of days (filled in the issuing rules).
Test if rules work for any i[item]types and if there is no regression.
- new column issuingrules.renewalperiod
- remove all occurrences of an already removed syspref (globalDueDate)
- remove an unused routine (Overdues::GetIssuingRules)
How it works:
- On existing installations, the issuingrules.renewalperiod =
issuingrules.loanlength. So the behaviour is the same before and after
this patch.
- when you add a rule, you can choose a renewal period (the unit value
is the issuingrules.unit). So you can have a renewal period in hours
or days.
- The default value for the renewal period is 21 days (same as
loanlength)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Changed declartion from:
my $op = $input->param('op');
to
my $op = $input->param('op') || q{};
in order to give an empty string default preventing error
logs from filling needlessly.
Signed-off-by: Marc Veron <veron@veron.ch>
The patch removes warnings like:
Use of uninitialized value $op in string eq at...
However there is one more warning, but it is not related to $op (addressed by this patch):
smart-rules.pl: Use of uninitialized value in string ne at .../admin/smart-rules.pl line 388.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Replaced existing MaxFine syspref logic with overduefinescap.
Repurposed MaxFine to be the overall overdue limit for all items
overdue. Implemented new MaxFine logic in UpdateFine().
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Tested according to Srdjan's test plan and everything worked like he said it would. I set fined equal to $2 and max fine equal to $1. When I ran the fines script for overdue items fines assessed were only $1.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fix some careless code redeclaring a variable
declaring a variable in a condition
so that these don't generate errors
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds support for Floating Collections (i.e. items that don't automatically return
home when checked in at another branch) on a per branchcode/itemtype basis.
This patch adds a new column (returnbranch) to the default_circ_rules, default_branch_item_rules,
default_branch_circ_rules and branch_item_rules tables, after the 'holdsallowed' column. While
this is coded as a varchar(15), the only currently supported values are 'homebranch', 'holdingbranch',
'noreturn' and NULL.
On upgrade, the value of HomeOrHoldingBranchReturn is used to populate the global default (which is
stored in default_circ_rules.returnbranch).
To access this value, use C4::Circulation::GetBranchItemRule. This subroutine is altered to supply
an additional key, "returnbranch", containing this value (or 'homebranch' as a default). No existing
usage of GetBranchItemRule should need to be modified.
The use of HomeOrHoldingBranchReturn is removed in AddReturn to instead use this subroutine. This will
determine, on a more granular level, where the item should be transferred, after all is said and done. If
'noreturn' is specified, then the material will remain at the branch doing the checking in.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Passes prove t xt t/db_dependent
I was able to make this feature work as advertised.
As noted above, if you want a floating rule applied across all branches, adding a single default rule won't suffice, you'll need to add the rule to all branches. That issue is not related to the functioning of *this* patch however.
The URL on the page did not have a branchcode, so the delete failed silently, and
returned the user to the "All" rules page. Turns out, the array for the rules was
not being populated with the branchcode!
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Implements the RFC found at http://wiki.koha-community.org/wiki/Hard_Due_Dates_Circ_Rule_RFC. See squashed commits
messages below for details of implementation.
Squashed commit of the following:
commit 871b91af00871146eb1216ebf5ce673dda2c5925
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Tue Dec 28 15:09:49 2010 -0500
Hard Due Dates dev part 3: implementing the due dates in circ
CalcDateDue now calls GetLoanLength, rather than each invocation running separately one after another. Therefore, instead of
the 'loanlength' param, CalcDateDue now takes 'itype', and uses the info to get both the issuelength and the hardduedate info (if it exists)
Global Due Date no longer populates in the sticky due date field in Circ, since it can't be determined before the item is scanned. Any specified
due date still overrides the circulation rules, if allowed.
Hard Due Dates in the past will return an error message, but can be manually specified if truly desired.
Also, a small fix to updatedatabase.pl to allow the old data to populate if possible.
commit 14d5505f3c01287a2464a759f0076c1d4b665c49
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Mon Dec 27 18:28:11 2010 -0500
HardDueDates dev part 2: adding admin interface
Adds columns to Smart Rules page, including calendar for easy date selection.
Removes globalDueDate and ceilingDueDates from system preferences editors
commit 76e3e3d86a7a54c6ce4253e7f68278b4dc75a0bb
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Mon Dec 27 15:58:05 2010 -0500
HardDueDates dev part 1: database changes
Adds two new columns to issuingrules, a hardduedate and a hardduedatecompare. If globalduedate is set, use that as the universal value
for all circ rules. Else, if ceilingduedate is set, use that as the universal value. Adjust the comparison accordingly (-1 before, 0
exact, 1 after). the old system preferences globalDueDate and ceilingDueDate are then removed.
Rebased onto 3.03.00.032
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The variable name for the current branch being edited was the same as the variable used in
cat-search.inc, which passed along the circ-rule library to circulation.pl, and then overriding
the set library from there.
This patch renames the template variable 'current_branch', so that it does not populate the 'branch'
param in cat-search.inc
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
