This patch fixes 2 other occurrences. The first one is in POD of
AddReserve, the other one fixes SIP code
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a clause in ModReserveAffect to check if there
are existing transfers and close them when setting a hold to waiting
To test:
1 - Set AutomaticItemReturn to Do
2 - Checkin an item from Library B at Library A
3 - Confirm item is in transfer (check the details page)
4 - Place a item level hold for pickup at library A
5 - Checkin the item at Library A
6 - Confirm the hold
7 - View the details page
8 - Note the item is in transit and waiting
9 - Apply patch
10 - Delete hold and repeat
11 - Confirm that transfer is closed when hold marked waiting
Signed-off-by: Sally <sally.healey@cheshirewestandchester.gov.uk>
Signed-off-by: Stina Hallin <stina.hallin@ub.lu.se>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It seems like ModReserveFill and ModReserveAffect should both produce action logs for holds.
Test Plan:
1) Apply this patch
2) Place a hold
3) Check in the item to trap the hold
4) Check out the item to fill the hold
5) Check the action logs for that reserve id
6) Note the new logs!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When "reserve/request.pl -> C4/Reserves.pm::IsAvailableForItemLevelRequest" called many times with hundred of items and "on shelf holds" parameter set to "If all unavailable" for these items + patron, it goes slow.
It happens because in subloop it is checking if all items available so it is O(n^2) and it re-checks each time the same info for each item with repeating DB/data requests.
Fix:
The inner loop 1:1 picked out into separate subroutine and called outside of the loop, saving data in 'items_any_available' variable once, this variable passed to IsAvailableForItemLevelRequest to be used inside as the precalculated result.
This made algorithm O(n) instead of O(n^2) so there is noticeable speed increase.
How to reproduce:
1) on freshly installed kohadevbox create/import one book,
remember that biblionumber for later use it in down below,
2) add 100 items for that book for some library,
3) find some patron, that patron's card number we will
use as a borrower down below to open holds page,
4) check for the rule or set up a single circulation rule
in admin "/cgi-bin/koha/admin/smart-rules.pl",
that rule should match above book items/library/patron,
check that rule to have a non-zero number of holds (total, daily, count) allowed,
and, IMPORTANT: set up "On shelf holds allowed" to "If all unavailable",
("item level holds" doesn't matter).
5) open "Home > Catalog > THAT_BOOK > Place a hold on THAT_BOOK" page
("holds" tab), and enter patron code in the search field,
or you can create a direct link by yourself, for example, in my case it was:
/cgi-bin/koha/reserve/request.pl?biblionumber=4&findborrower=23529000686353
6) it should be pretty long page generation time on old code, densely increasing for every hundred items added. In the case of this solution, it's fast, and time increases a little only, linear.
I tested on my computer in VirtualBox for page generation times,
did 3-5 runs for same case to check if results are stable, and got such values:
(old code):
100 items: 50 seconds
200 items: 3.2 minutes
300 items: 7.3 minutes
(version with fix):
100 items: 4.4 seconds
200 items: 7.5 seconds
300 items: 10.4 seconds
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This is just refactoring. extracting logically independent code
to separate sub + tests update. No logic change yet.
Searching for "any_available" item among all biblionumber items was done
inside of "elsif on_shelf_holds == 2", and it is logically very independent
piece of code (this "@items" loop), it needs just biblionumber and patron
as parameters so it can be extracted into separate subroutine, and
later also called/reused from somewhere else.
This ability to call from another place also made for future patch
to remove O(n^2) problem with nested loops.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
`$on_shelf_holds` was assigned before "return .. if" but not used in that code piece,
so sometimes it was useless. Moved assignment after "return .. if".
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Since bug 21206, C4::Reserves::_get_itype is not longer used and should
be removed.
commit 31c29fd31f
Bug 21206: Replace C4::Items::GetItem
UPDATE: In the meanwhile another occurrence was added to Reserves.t, but
easy to replace
Test plan:
% git grep _get_itype
must not return any occurrences.
If one needs it, Koha::Item->effective_itemtype must be used instead.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Place a hold for pickup at a different branch than you are signed in at on an item owned by current branch
2 - Check in the item
3 - Confirm the transfer
4 - Check the branchtransfers table and note the reason is 'Reserve'
5 - Set the preference CanMarkHoldsToPullAsLost to allow
6 - Place a hold on an item at branch you are singed in at
7 - Ensure you are not using strict sql modes (bug 22431)
8 - Go to Circulation->Holds to pull
9 - Mark hold as lost
10 - Check branchtransfers and confirm reason is "LostReserve"
11 - Check in item from step 1 at the correct branch
12 - Go to Circulation->Holds awaiting pickup
13 - Cancel the reserve
14 - Check branchtransfers and confirm reason is "CancelReserve"
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Currently when fixing priorities of existing holds, priorities aren't
fixed when checking out a middle priority hold because the hold has been
fulfilled and deleted. This patch adds a check for, if the hold can't be
found, an old hold with the required reserve_id.
To test:
1. Place at least four holds on a biblio for different borrowers
2. Check out an item to the 3rd priority borrower
3. Check the existing holds table for the biblio. The priorities might be
out of order, or try clicking the dropdowns and there might be an empty
dropdown option, or open the browser developer tools and notice the option
values in the select are missing value=3.
4. Apply patch and restart memcached
5. Check out an item to the 2nd priority borrower
6. Check the existing holds table for the biblio. Confirm the priorities
have been fixed and are now consecutive with no gaps.
Sponsored-by: Chartered Accountants Australia and New Zealand
Signed-off-by: Emmi Takkinen <emmi.takkinen@outlook.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates the emailLibrarianWhenHoldIsPlaced functionality to
use the inbound_email_address method to obtain the correct email address
for a branch.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The number of parameters of AddReserve makes it hard to read and
maintain.
This patch replace it with a hashref, which will make the calls more
readable.
Moreover the bibitems has been removed as it was not used by the
subroutine.
Test plan:
- Make sure the tests pass
- Read the diff and search for typos
- Place a hold on few items
Note for QA: reservation_date and expiration_date do not match the DB column's names,
should we?
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch simply adds a test for itemnumber being defined in the
reserve before comparing it to silence the warning.
Test plan:
1) Prior to patch, run prove t/db_dependant/Circulation.t and note lots
of `Use of uninitialized value in numeric eq (==) at
/kohadevbox/koha/C4/Reserves.pm line 790` warnings.
2) Apply the patch, re-run the test and note the tests still pass but
the warnings are now gone.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Without this it is not possible to make for a specific patron category
or itemtype a more specific unlimited holds_per_day rule if you have a
catch all rule (categorycode = *, itemtype = *) with limited
holds_per_day value.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
* CanItemBeReserved
Prior to "Bug 18936: Convert issuingrules fields to circulation_rules",
GetHoldRule returned holds_per_record even if no reservesallowed was
defined. This change restores this behavior.
FIXME Note: In GetHoldRule we return itemtype only if reservesallowed is set,
not sure it is correct.
* t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
When setting returnbranch, holdallowed and hold_fulfillment_policy, we
should not provide categorycode.
* t/db_dependent/Holds.t
Prefer to keep the existing rules instead of removing them. It got quite
hard to understand what was going on here because of the mixup with
the rule reservesallowed that was in issuingrules, and the other rules
we used for the tests. Also, categorycode should not be passed to set
those 3 rules (holdallowed, hold_fulfillment_policy and returnbranch)
* t/db_dependent/Circulation.t
Setting lengthunit to 'hours', no need to make sure the rule has been
correctly be saved
* t/db_dependent/Circulation/CalcDateDue.t
It uses hardcoded data that is not in the sample data (categorycode=C).
Let use K that exists and postpone a refactore of the whole script (to
make it create the data it needs).
* t/db_dependent/Circulation/ReturnClaims.t
* t/db_dependent/Circulation/IssuingRules/maxsuspensiondays.t
Simple replace Koha::IssuingRule with Koha::CirculationRules
* t/db_dependent/Koha/Charges/Fees.t
=> FIXME Still failing, stuck here, need help
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This necessitates moving the circ rules from using '*' to using
undef/NULL.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
and remove 'scalar' keyword in calls where it's not needed.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Hans Palsson <hans.palsson@hkr.se>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
With bug 24217 pushed, lot of warnings appears during the tests are run.
Most of them are "Use of uninitialized value in "
Test plan:
Take a look at the output of run 1049
https://jenkins.koha-community.org/job/Koha_Master_D9/1049/consoleFull
Most of the warnings from this run will be removed by this patch
At least 2 are not fixed:
Use of uninitialized value in numeric eq (==) at /kohadevbox/koha/C4/Reserves.pm line 791.
t/db_dependent/Items_DelItemCheck.t => see 23463
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds "patron's hold group" as a new option to Hold pickup library match
To test:
1. Set ReservesControlBranch preference to item.
2. Create a hold group
3. Go to circulation and fines rules
SUCCESS => in 'Hold pickup library match' there is a new option called "patron's hold group"
4. In a library not in hold group set 'Hold policy' to "any" and 'Hold pickup library match' to "patron's hold group"
5. Search for a user in the hold group
6. 'Search to hold' for items of the library of step 4
7. Select an item and 'Place hold for [user]'
SUCCESS => in 'Pickup at' you should see patron's hold group as options
8. In OPAC sign in as the same user of step 5
9. Search for the item in step 7
SUCCESS => in 'Pick up locations' you should see patron's hold group as options
10. Sign off
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
* Bug 22284: (follow-up) Remove commented warn and address test failures
* Bug 22284: (follow-up) fix test count after merge
* Bug 22284: (follow-up) fixes after 15496
* Bug 22284: (follow-up) fixes after 18936
* Bug 22284: (follow-up) Remove HomeOrHolding from reserves
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies C4::Reserves to control when hold group options where selected
in smart rules.
In CanItemBeReserved adds 2 new error status messages
1) branchNotInHoldGroup: when a patron's homebranch is not in item's hold group
2) pickupNotInHoldGroup: when a selected pickup location is not in item's hold group
Also CheckReserves is modified when item's priority is defined, to control by hold
group when required.
Finally, IsAvailableForItemLevelRequest was also modified to control by hold group when
required.
To test:
1) Apply this patch
2) prove t/db_dependent/Holds.t
SUCCESS => Result: PASS
3) Sign off
Sponsored-by: VOKAL
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We absolutely need that for modules.
We are enabling strict by using Modern::Perl.
Note that other modules from C4 use strict and warnings, instead of
Modern::Perl
Test plan: git grep 2505 **/*.pm should not return any results
And let's see later what needs to be fixed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Checkout an item to a patron
2 - Make sure 'ReservesNeedReturn' is set to 'Automatically'
3 - Place an item level hold on the checked out item
4 - Note the hold is marked waiting
5 - Delete the hold
6 - Apply patch
7 - Place a new hold
8 - Hold is not marked waiting
9 - Please a hold on a different item
10 - Note it is marked waiting
11 - Test when item is damaged and hold not allowed on damaged items
12 - Test when item is in transit
13 - Test when item has another hold
14 - Only in the case where none of the above are true should the hold be marked waiting
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch restores the behavior prior to bug 21206.
If "Hold pickup library match" is "Not set", then
hold_fulfillment_policy equals an empty string.
Test plan:
1. Go to "Circulation and fines rules"
2. Under "Default checkout, hold and return policy", unset "Hold pickup
library match" and Save
3. Place a hold on one item for one patron
4. Try to checkout the same item with another patron
=> Without this patch you the checkout list do not show, and the logs
contain "The method Koha::Item-> is not covered by tests!"
=> With this patch applied you see the checkout list
QA will take care of comparing the statement with the one before bug 21206
and make sure they are equivalent
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates all cases where debit_type_code was 'Res' to
'RESERVE' which is more informative and consistent with the new style
guidelines.
The patch also ensure all calls to add_debit with a type or 'reserve'
now pass the capitalised code instead.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1. Place some holds
2. Go to the 'Holds' tab of the biblio record
3. Modify dates in the table and click on 'Update holds' button
4. Verify that dates have been correctly updated
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The SIP2 interface has long used a set of accounttypes to denote payment
types. Now we have an authorised list of payment_types and a
payment_type field in accountlines this patch alters the logic to use
it.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
MoveReserve uses CheckReserves to see if the current patron has any holds
on the title they are checking out, however, CheckReserves doesn't return
all holds on a biblio, it returns holds on the item from the holdsqueue
if they exist
This can create a condition where we check holds on an item, find we have it planned for
another borrower, confirm checkout to the current borrower, but don't fill their hold
To test:
1) Find record
2) place record level holds for 2 different patrons (record level)
3) Run holds queue builder, check the queue to confirm an item was selected for patron 1
Circulation->Holds queue->Library="All"
4) Check out the item queued for patron with priority 1 to the second patron
5) You should be asked to confirm, do so
6) Note the item checks out, but both holds remain
7) Apply patch
8) Check in the item
9) Don't confirm the hold
10) Check the holds on the record and the holds queue
11) Patron 1 should be priority 1 with an item selected from the holds queue
12) Checkout to patron 2 as before
13) Note the hold for patron 2 is filled this time
14) Prove -v t/db_dependent/Reserves.t
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
0 - Make sure ExpireReservesMaxPickupDelay is set to 'Don't allow'
1 - Place a hold for a patron
2 - Check in at another library to set it in transit
3 - Update expirationdate of hold to be in the past
UPDATE reserves SET expirationdate='1999-12-31'
4 - Run cancel_expired_holds.pl
5 - Hold is not canceled
6 - Apply patch
7 - Run again
8 - Hold is cancelled
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When the waiting status of a hold is revert we want to preserve the
level hold preference of the user.
Test plan:
Place a hold at biblio level
Confirm the hold
Revert the waiting hold
=> The hold must still be considered as a biblio level hold ("next
available item")
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Almost everywhere we call IsAvailableForItemLevelRequest we already have
a Koha::Patron and Koha::Item object. It makes sense to use them to
avoid a refetch
Test plan:
It would be good to test this patch on top of 19300 and 19301 and make
sure everything works as expected
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Apply all patches except this one
2) Checkout out an item to a patron
3) Check the item in - note that this will fail
4) Apply this patch, and repeat steps 1-3, noting instead that the the
check is instead successful
5) Verify also that reserves act as expected
5) Sign off
Sponsored-by: Catalyst IT
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new syspref "UpdateItemLocationOnCheckin" which
accepts pairs of shelving locations. On check-in the items location is
compared ot the location on the left and, if it matches, is updated to
the location on the left.
This preference replaces ReturnToShelvingCart and
InProcessingToShelvingCart preferences. The update statement should
insert values that replciate these functions. Note existing
functionality of all items in PROC location being returned to
permanent_location is preserved by default. Also, any items issued from
CART location will be returned to their permanent location on issue (if
it differs)
Special values for this pref are:
_ALL_ - used on left side only to affect all items
_BLANK_ - used on either side to match on/set to blank (actual blanks
will work, but this is an easier to read option)
_PERM_ - used on right side only to return items to permanent location
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set the new system preference UpdateitemLocationOnCheckin
to the following (assuming sample data):
NEW: FIC
FIC: GEN
4) Create an item, set its location to NEW
5) Check in the item, note its location is now FIC
6) Check in the item again, note its location is now GEN
7) Check in the item again, note its location remains GEN
8) Test using _ALL_, _BLANK_ and _PERM_ for updates
9) Try entering various incorrect syntax in the pref and note you are warned
Sponsored by:
Arcadia Public Library (http://library.ci.arcadia.ca.us/)
Middletown Township Public Library (http://www.mtpl.org/)
Round Rock Public Library (https://www.roundrocktexas.gov/departments/library/)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Set a default holds plicy for an item type as 'from home library'
2 - Set CircControl to 'logged in library'
3 - Log in as staff from a library without the rule set
4 - Note you can set holds for patrons of any library on items of type
above
5 - Toggle ReservesControlBranch and note that nothing changes
6 - Toggle CircControl and note some combinations don't allow holds
7 - Apply patch
8 - Toggle ReservesControlBranch and note that holdability is affected
9 - Toggle CircControl and note holdability does not change
10 - Read the note on admin/smartrules.pl and confirm it makes sense
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes changes to the way hold fees are recorded and displayed
in the OPAC and staff client:
- No English strings should be stored in the accountline description.
- The accounttype code should be used to display what kind of charge it
is.
To test, apply the patch and go to the staff client:
- Configure a patron category to have a hold fee.
- Place one or more holds for a patron in that category.
- On the patron's record, view Accounting -> Make a payment
- There should be a separate column for "Account type" showing "Hold
fee" for the hold charges.
- There should be no "Res" or "Reserve Charge" text in the
description column--just the title.
- Switch to the "Transactions" tab. The display should be similar.
- In the OPAC, log in as a patron who has hold fees on their account.
- View the "your fines" page to confirm that the information is
displayed correctly there as well.
- Place a hold for a patron who incurs hold charges.
- Log in to the self-checkout module as that patron and check out an
item which will fulfill that hold.
- The correct fine information should be saved to accountlines: A "Res"
type with a description consisting only of the title.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The crux of this issue is that all those holds are unfilled record level holds. The code that checks for the number of holds the user already has *always* uses a branchcode of some form. Because of this, any open record level holds are completely ignored for this purpose.
Test Plan:
1) Set ReservesControlBranch to "item's home library"
2) Set an All libraries/All Patrons/All itemtypes rules limiting a patron to 2 holds
3) Place 3 record level holds, you can but you should not be able to!
4) Delete the holds
5) Apply this patch
6) Attempt to place 3 record level holds
7) Note that you cannot!
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the 'interface' field to the accountlines table and
updates all Koha::Object routines and calls to use it.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
A series of ternaries were introduced when we moved to add_debit which
defaulted to 'user 0' should a userenv not be set. This was incorrect
as userenv may well not be set (during cronscript runs for example) and
the new constraint would not allow such a default. We switch to 'undef'
here to satisfy the constraint.
Test plan
1) Ensure you have data in your system that would be caught by the
longoverdues cronjob.
2) Ensure you're sysprefs are setup to charge for lost items
3) Run the script and varify it runs to completion without errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Branch transfer limits are respected for placing holds in the OPAC but nowhere else. This should be remedied.
Test Plan:
1) Set up a branch transfer limit from Library A to Library B
2) Verify you cannot set up a hold for an item from Library A for pickup at Library B from the staff interface ( without overriding )
3) Verify you cannot place that hold via ILS-DI
4) Verify you cannot place that hold via SIP
4) Verify a forced hold from Library A to Library B will not show up in the holds queue
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the mentioned method use the biult-in method for
resuming a suspended hold, instead of manually setting the specific
attributes using the accessors.
The side effect for this is that HoldsLog is now honoured.
This patchset also refactors the tests a bit so they rely on the exposed
methods and thus don't rely on specific implementation details (like
suspended hold means a date in suspended_until plus suspended=1).
To test:
- Apply the regression tests patch
- Run:
$ kshell
k$ prove t/db_dependent/Reserves/AutoUnsuspendReserves.t
=> FAIL: It fails loudly because things are done manually
- Apply this patch
- Run:
k$ prove t/db_dependent/Reserves/AutoUnsuspendReserves.t
=> SUCCESS: Tests pass!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Note: This is here for information purpose, feel free to test it if you
wan to play with it.
TODO: C4::Reserves::_get_itype is not longer in use
No more GetItem must be returned by:
git grep GetItem|grep -v GetItemsAvailableToFillHoldRequestsForBib|grep
-v GetItemsForInventory|grep -v GetItemsInfo|grep -v
GetItemsLocationInfo|grep -v GetItemsInCollection|grep -v
GetItemCourseReservesInfo|grep -v GetItemnumbersFromOrder|grep -v
GetItemSearchField|grep -v GetItemTypesCategorized|grep -v
GetItemNumbersFromImportBatch|cut -d':' -f1|sort|uniq
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds $branchcode_to parameter to CanBookBeReserved and
CanItemBeReserved. It represents the pickup location for the hold. This patch
checks if the library is configured to be a pickup location (see Bug 7534), and
also if the item can be transferred into the given library (see Bug 18072).
To test:
1. prove t/db_dependent/Holds.t
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch fixes a bug in ChargeReserveFee:
To test:
- Run:
$ kshell
k$ prove t/db_dependent/Reserves.t
=> FAIL: Tests fail because branchcode is not set
- Apply this patch
- Run:
k$ prove t/db_dependent/Reserves.t
=> SUCCESS: Tests pass!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
For the purposes of statistics, it appears that it would help many
libraries to have branchcode recorded in the accountlines table. For
payments, the field would contain the code for the branch the payment
was made at. For manual invoices, it would be the code of the library
that created the invoice.
Test Plan:
1) Apply this patch set
2) Create and pay some fees
3) Note the branchcode for those fees and payments is set
to your logged in branch
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
While it doesn't have a practical effect (the variable is reset several
lines below) I agree this should be explicitly set to its default.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch implements the required changes in
C4::Reserves::CanItemBeReserved so it implements a daily limit on holds.
It returns the 'tooManyReservesToday' string if the policy doesn't allow
placing the hold. It returns 'OK' (current behaviour) otherwise.
To test:
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/db_dependent/Holds.t
=> FAIL: Tests fail because the error condition is not making
CanItemBeReserved return the desired error code.
- Apply this patch
- Run:
k$ prove t/db_dependent/Holds.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Koha::CirculationRules->get_effective_rule will become the method to
call to retrieve a specific rule, we should start using it when
possible.
Moreover undef could replace '*' to mean 'any', that way we will be able
to add FK on circulation_rules
TODO: Add more tests
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jesse Maseto <jesse@bywatersolution.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is the first step in the circulation rules revamp as detailed
in the RFF https://wiki.koha-community.org/wiki/Circulation_Rules_Interface_and_Backend_Revamp_RFC
This patch moves the recent max_holds rule to the new circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jesse Maseto <jesse@bywatersolution.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It is possible to set up circulation rules to limit trapping of holds by pickup library and itemtype.
To make it easier to understand which holds will be trapped in a given circumstance,
it would be nice if we could optionally group holds by pickup library and/or itemtype.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Enable AllowHoldItemTypeSelection
4) Pick a record and create holds with various pickup libraries and itemtype combinations
5) Enable HoldsSplitQueueNumbering
6) Try the different combinations of HoldsSplitQueue
7) Ensure the hold "arrows" move the items correctly
* Up and down arrows should move hold above or below the adjacent hold within a hold fieldset
* Top and borrom arrows should move hold to the top or bottom within a hold fieldset
Sponsored-by: Stockholm University Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Followed test plan, patch worked as described. Also passed QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds $branchcode_to parameter to CanBookBeReserved and
CanItemBeReserved. It represents the pickup location for the hold.
To test:
1. prove t/db_dependent/Holds.t
Signed-off-by: Koha Team AMU <axelle.clarisse@univ-amu.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetItemnumbersForBiblio can be replaced with
my @itemnumbers = Koha::Items->search({ biblionumber => $biblionumber})->get_column("itemnumber")
Test plan:
- Use the GetAvailability service of ILS-DI
- Try to place a hold on an item that is available and another one
- Use the batch record deletion tool to remove record with and without items.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It's possible to set a limit on the maximum number of holds for a particular branch/category/itemtype, but not on the total number of holds for a given patron (by branch/category).
This new rule works in conjunction with the existing branch/borrower/item rules in that Koha will use the lower of the two limits. This new rule counts all holds of all types, which prevents bib-level holds from not being counted for the purpose of these limits. This makes the most sense and was also requested by the sponsor.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To recreate:
1 - Place a hold in your system
2 - Set that hold (or all holds) to expire today
update reserves set suspend_until=CONCAT( CURDATE()," 00:00:00");
3 - Run misc/cronjobs/holds/auto_unsuspend_holds.p
4 - Note the hold is sitll suspended
5 - Visit /cgi-bin/koha/reserve/request.pl for the book with the hold
6 - Note the suspend date is tomorrow (and cannot be set to today]
7 - Click update holds - the date in db is now set to tomorrow
8 - Reset to today
9 - Apply patch
10 - Run the cron again
11 - Visit the page and note hold is unsuspended
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch fixes a regression after bug 14695.
This patch adds itemnumber and barcode as optional params in ReserveSlip used
by hold-transfer-slip.pl to generate HOLD_SLIP. This is for ReserveSlip to be
able to generate correct slips when items in multi-item holds are checked in.
Test plan:
1) activate a circulation rule with multi-item holds
2) Place two holds on same biblio for patron
3) for debugging, either use browser console to observe POST request and responses
or use info from reserves, e.g. reserve_id in the HOLD_SLIP
4) checkin two items from same biblio on pickup branch
5) note that both holds are effectuated, but reserve_id is the same on both slips
6) also note that there is no itemnumber or barcode in the requests from returns.pl
7) Apply this patch
8) repeat 2-4
9) note that reserve_id is now different on the two slips
and/or:
Run tests:
t/db_dependent/Reserves/ReserveSlip.t
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We need to call Koha::Hold->set_waiting to correctly
calculate the expiration date.
It fixes a regression introduced by
commit 26634151db
Bug 12063 - Fix QA failures
The expiration date has to be set for waiting holds
== Test plan (time to execute: less than 4min) ==
1. Set ReservesNeedReturns to "Don't automatically"
2. Place a hold on a specific item
3. Check it in and confirm hold
4. The hold should have an expiration date
record page → Hold → "Expiration" column
5. It should be listed in staff:/cgi-bin/koha/circ/waitingreserves.pl
6. Set ReservesNeedReturns to "Automatically"
7. Place a hold on a specific item
(which should also behave like we check the item in to
keep it for the patron)
8. The hold should have an *empty* expiration date
record page → Hold → "Expiration" column
9. Holds awaiting pickup page should crash
staff:/cgi-bin/koha/circ/waitingreserves.pl
10. Cancel the hold to remove the corrupted data
record page → Hold → the red X
11. Apply this patch
12. Place a hold on a specific item
13. The hold should have an expiration date (not empty)
14. It should be listed in staff:/cgi-bin/koha/circ/waitingreserves.pl
15. Celebrate!
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At this point the subroutine is not used anymore
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Following the pattern introduced by bug 19300, we are going to move the
OnShelfHoldsAllowed logic to Koha::IssuingRules->get_onshelfholds_policy
Test plan:
Make sure the onshelfholds policy is correct when placing a hold
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
[1] For consistency going back to IsItemOnHoldAndFound in this sub.
This call is used in the on_shelf_holds == 2 case too.
The routine will be refactored quite soon.
Adding the else branch for on_shelf_holds == 0 for more clarity.
[2] Removing the test for found==F in reserves. In Koha F is only used
when the hold is filled and moved to oldreserves.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
- Checkout an item
- Place hold on this item,
- Return the item
- Make sure the hold is waiting (found W) and AllowOnShelfHolds is
not to 'Allow'
- Check that the button "Place hold" appears in opac detail page of
the biblio
- do the samewith items/reserves in transit
Changes on C4::Reserves::IsAvailableForItemLevelRequest
Make sure this tests pass:
- t/db_dependent/Reserves.t
- t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
Rebased - 2017-12-12 - Alex Arnaud
Bug 4319 - [QA fix] Create Koha::Biblio->hasItemswaitingOrInTransit
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is quite trivial and can be replaced easily with a new
method of Koha::Patron
Test plan:
Overdue notices and shelf sharing must be send the to an email address,
according to the value of the pref AutoEmailPrimaryAddress
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At this point the subroutine is not longer in use, we can remove it
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetReservesForBranch simply returns the waiting holds, for a specific
branch of not. This can easily be replaced with a call to
Koha::Holds->waiting
To avoid any regressions, I reuse the exact conditions (priority = 0),
but I do not think it is useful.
Test plan:
Make sure the holds information are correctly displayed on the waiting
holds screen.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes the following errors:
The method reserve_id is not covered by tests at /home/vagrant/kohaclone/C4/Reserves.pm line 859.
The method set is not covered by tests at /home/vagrant/kohaclone/C4/Reserves.pm line 871.
Can't call method "store" on an undefined value at /home/vagrant/kohaclone/C4/Reserves.pm line 871.
This is caused by
commit ba1f2f93ef
Bug 19058: Move C4::Reserves::GetReserveId to the Koha namespace
We are calling ->reserve_id on a Koha::Holds set.
Test plan:
- Serials -> Find subscription -> "Edit routing list" in the sidebar
- Add 1+ recipients
- Save -> "Save and preview routing slip"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If in the circ rules matrix you set "On shelf holds allowed" to "If all unavailable",
default hold policy "From home library" is ignored.
Test plan:
- Have a test user from one branch (eg Centerville)
- Set "On shelf holds allowed" to "If all unavailable" for your patron and item
category (or everyone and everything)
- For "Default checkout, hold and return policy", set hold policy to "From home library"
-> make sure there is no "Default holds policy by item type" to override the setting
- Have two items for a record.
1. An item with home branch same as test user (eg Centerville)
-> check this item out to somebody else
2. an item with a different home branch (eg Fairfield)
-> available, not checked out
- Try to place a hold for your test user. Does not work.
- Apply the patch
- Try to place a hold. Should work now.
Followed test plan, worked as intended
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Followed test plan in the intranet and OPAC, worked as intended.
With few assumptions made:
- when the hold works, should be on the item 1 (Centerville)
item 2 is only there to trigger the bug
- the circ rules were identically setup on each branch and in "Standard rules for all libraries"
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The variable is no longer used.
Removed a few empty lines on the way.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Apply just the first patch - the one with test
1) Run t/db_dependent/Reserves.t - test for CancelExpiredReserves should
fail
2) Apply the second patch
3) t/db_dependent/Reserves.t should pass now
Followed test plan, patch worked as described. Passes QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Do not apply the patch
1) Place hold on item from another branch
2) Switch to that branch
3) Check them in at the other branch to set them into transport status (T)
4) Switch back to your homebranch
5) Check items in again, use the different confirm buttons and
compare: Only "confirm and print" will be set to waiting, "confirm"
remains in transport.
6) Apply the patch
7) Repeat 1-5 - now should work as expected - the hold is marked waiting
on "confirm" button too
8) Check the hold from the same branch, to make sure this doesn't add
regression
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Resolves:
The method found is not covered by tests at C4/Reserves.pm line 815.
Test plan:
Run t/db_dependent/Holds/CancelReserves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It's done!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is something wrong with the DELETE log, it should be replaced with
a FILLED log.
Anyway, here we do not want it to be logged.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new Koha::Hold->cancel method and replaces the calls
to C4::Reserves::CancelReserve with it.
Test plan:
- Add and cancel holds
- Change priority of holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetReserveId can easily be replaced with a call to
Koha::Holds->search->next->reserve_id
It will ease next changes to use Koha::Hold objects
Test plan:
Cancel a reserve and print a slip reserve
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This GetReserve subroutine can be replaced with Koha::Holds->find
Test plan:
- git grep GetReserve
must not return results where GetReserve is called
- Cancel a reserve
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is only used once and can easily be replaced with
Koha::Patron->holds->count
Test plan:
- Set maxreserves=5
- Place 3 holds for a given patron
- Place again 3 holds for this patron
3+3 > 5 => The holds must not be placed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is no longer in used and can be removed
Test plan:
git grep GetReservesToBranch
must not return any results
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
git grep GetReserveInfo
should not return results
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is only used once and can be replaced with a call to
Koha::Holds->find
It will avoid unnecessary joins.
Test plan:
- Define a HOLD_SLIP template notice using fields from the tables
reserves, branches, borrowers, biblio, biblioitems and items.
- Generate one and make sure the values are correctly filled
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Most of the time C4::Biblio::GetBiblioData is used to retrieve the title
and/or the author of a bibliographic record.
This patch replaces the easy occurrences of GetBiblioData, the ones
where the 2 joins are needed, but only data from biblio and biblioitems
table are.
Test plan:
It will be hard to test everything, I'd suggest a QAer to review this
patch and confirm that the difference occurrences of GetBiblioData have
been correctly replaced by calling Koha::Biblios->find or
$biblio->bibioitem
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At this point, there should not be any occurrences of
GetReservesFromBorrowernumber anymore.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The today parameter is properly handled from C4::Letters subroutines, we
do not need to pass it from callers.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch set the lang parameter when C4::Letters::GetPreparedLetter is
called to generate the notice.
Note that we do not need to pass it if want_librarian is set.
TODO: I do not know what to do with TransferSlip
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Remove expiration date calculation in C4::Letter since it's done
when setting the reserve waiting,
- remove expiration date calculation in circ/waitingreserves.pl. Use
the one in DB,
- add a new atomic update that calculate expiration date for
waiting reserves,
- add tests for days_foward function and fix the infinite loop.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes koha automatically set expiration date when reserves become
waitting. Also it adds a new syspref "ExcludeHolidaysFromMaxPickUpDelay" that allows to
take holidays into account while calculating expiration date.
Test plan:
- Install this patch and run updatedatabase.pl script,
- allow ExpireReservesMaxPickUpDelay in system preferences,
- set ReservesMaxPickUpDelay to 5.
- Place an hold on a checked out item and check in this item:
The hold's expiration date should be today + 5.
- Allow ExcludeHolidaysFromMaxPickUpDelay in system preferences,
- add holiday during this pickup delay period,
- Create a new hold and make it comes waitting:
The hold's expiration date should be today + 5 + number of closed
day(s).
Also:
- Check that ExpireReservesOnHolidays syspref works again
without ExcludeHolidaysFromMaxPickUpDelay.
- Check that cancel fees apply again if wanted.
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At this point, there should not be any occurrences of
GetReservesFromItemnumber anymore.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is a QA follow-up to fix several issues:
- 1 call to GetReserveFee was wrong in ModReserveFill
- Update DB entry was wrong and insufficient
- Add robustness to the tests in sco-main
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently, Koha charges all patrons a hold fee in all circumstances, if
a hold fee is applicable to their patron category.
This is immediately applied at point of request.
However, it would be useful to let patrons make requests without a
charge
being incurred until they physically have the item in their hands and
checked out to their cards.
The hold fee will only be added to the account as soon as the item is
checked out to the requesting patron.
With this scenario, we will be certain that patrons have the correct
item, and they are happy with what has been supplied.
It also means that patrons can place holds via the OPAC without reaching
the usage limit that has been selected.
Test plan:
0/ All the following steps must be done with a patron using a patron category with a hold fee
1/ Make sure that the existing options for HoldFeeMode work as before
2/ Select the third option "any time a hold is collected"
3/ Place a hold on an item
4/ Note that the patron has not been charged
5/ Check this item from the staff interface
6/ Note that the patron has been charged
7/ Place another hold
8/ Use the self checkout feature at the OPAC for the checkin
9/ Note that the patron has been charged and a message is displayed to
inform about the fee.
Sponsored-by: Cheshire Libraries
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch updates the current code to make it works with the new
option's name of the syspref.
It also refactor the tests to make them more reusable and robust.
Sponsored-by: Cheshire Libraries
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At this point, there should not be any occurrences of
GetReservesFromBiblionumber left in the codebase
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Add reserves.reservenotes to HOLDPLACED message
2 - Enable emailLibrarianWhenHoldIsPlaced OpacHoldNotes sysprefs
3 - Place a hold via OPAC with a note
4 - view the messagequeue and note the reservenotes is blank
5 - Apply patch
6 - Place a hold with a note
7 - view the messagequeue and note the reservenotes is populated
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The variable $item used to be a hash, but at the end of the function,
it's a Koha object. As $item->{homebranch} doesn't yield anything and
should be $item->homebranch. It prevents people using different
branches without holds between branches from placing a hold on an item
they should be able to place hold on.
Test plan:
1. Before patch
a. with IndependantBranches off
b. try to place hold on an item you should be able to place hold on
c. it should work
d. put IndependantBranches on and canreservefromotherbranches off
e. shouldn't work
2. after patches redo steps from (1) and everything should be working
fine.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note: Item is fetched twice, it's not necessary. But out of the scope of
this patch.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
If in the circ rules matrix you set "On shelf holds allowed" to "If all unavailable",
items with status "Not for loan" are considered available and break the functionality.
Test plan:
- Set "On shelf holds allowed" to "If all unavailable" for your patron and item
category (or everyone and everything)
- Have two items for a record. Check out one
- Set 7 - Not for loan: "Not For Loan" for the second item
- Try to place a hold. Does not work.
- Apply the patch
- Try to place a hold. Should work now.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes notification when same biblio has multiple reserves with same borrower,
introduced in Bug 14695. C4::Reserves::ModReserveAffect uses internal method
_koha_notify_reserve but sends itemnumber and biblionumber instead of record_id.
To test:
Prerequisites:
- One biblio with two items attached
- A patron with hold_filled notification activated
- A letter for HOLD with <<reserves.reserve_id>> in it
1) Place two reservations on same biblio
2) checkin item x on pickup branch, observe patron message generated
3) checkin item y on pickup branch, observe patron message generated
4) note that reserve_id is the same on both messages, which is wrong
5) apply this patch and repeat 1-3
6) now observe notifications have correct (different) reserve_id
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
I was reading through Reserves.pm trying to figure out a bug - found some
unused variables instead.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Add tests for CanItemBeReserved returns 'itemAlreadyOnHold' to t/db_dependent/Holds.t
* Don't let GetReserveId explode
* Use search instead of map
* Remove instances of resbarcode
* Fix badly formed li closing tag
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
* Removes tests no longer needed
* Updates rules to work with existing tests
* Fixes code issues revealed by unit tests
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds logging for several holds actions. Specifically for:
- CREATE
- CANCEL
- DELETE
- RESUME
- SUSPEND
- MODIFY
To test:
- Enable the HoldsLog syspref
- Add a hold on a record/item
=> SUCCESS: The log view shows the CREATE action
- Click on the <Suspend> button
=> SUCCESS: The log view shows the SUSPEND action
- Click on the <Unsuspend> button
=> SUCCESS: The log view shows the RESUME action
- Click on the red cross, to delete the hold
=> SUCCESS: The log view shows the CANCEL action
Note: The DELETE action is logged when DelMember is called, with bug 16819 patches applied.
Sponsored-by: NEKLS
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
I also wonder about this going in defaulted on, but since the other logs are as well it seems ok to me.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Holds that have expired have been untranslatable in Patron's Fines-tab. Also, they are
mixed with other type of fines with accounttype "F". This patch gives expired holds an
own accounttype "HE" (Hold Expired) and modifies the boraccount to recognize this new
accounttype in order to make it translatable.
To test:
1. Make a hold and let it expire
2. Go to Patron's Fines tab
3. Change Koha's language to some other than English
4. Observe that there is a "Hold waiting too long" fine described in English
5. Apply patch
6. Make another hold and let it expire
7. Update translations
8. Find "Hold waiting too long" from your .po file
9. Translate it and install translations
10. Go back to Fines tab and observe that the new expired hold is translated
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Some libraries would like to prevent patrons from placing holds on
items where there are other items available for the patron to
check out.
Test Plan:
1) Apply this patch
2) Browse to the circulation rules
3) Note the new option for "On shelf holds allowed"
4) Set the rule to "If all unavailable", set "item level holds" to allow
5) Find a patron/branch/itemtype applicable to this rule
6) Ensure at least one item on the record is available for the
patron to check out
7) Attempt to place a hold for the item
8) Note you cannot place the hold
9) Check the available item out to another patron
10) Note you can now place a hold for the first patron
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Works as intended!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adding reserves.itemtype made a query to fail in CanItemBeReserved.
This patch prefixes the column names with the corresponding table names
to prevent that.
You can trigger the error by running
prove t/db_dependent/Holds.t
You should see something like this:
Column 'itemtype' in where clause is ambiguous
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like the ability to select the itemtype to request
when placing holds. For example, if a record has 3 copies of BookA and 3
copies of BookA in large print, this feature would allow a person to
place a hold on the record, but still be able to target only the Large
Print edition so that the first Large Print copy that becomes available
is targeted, rather than forcing the patron to select a particular copy
to hold.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with items of two or more itemtypes
4) Place a record level hold on the record while choosing one particular
itemtype
5) Check in an item from the record that is not of that itemtype
6) Notee it is not trapped for the hold
7) Check in an item from the record that does match the selected itemtype
8) Note the item is trapped for the hold
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to be able to limit hold filling to items that
match the pickup library for a hold based on the item's home or holding
library. The patron's home library should not affect whether a patron
can place the hold, instead the hold will only be fillable when an item
matching the pickup location becomes available.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the new "Hold pickup library match" rules for "checkout, hold,
and return policy" and for "holds policy by item type"
4) Set the policy to "item's holding library"
5) Place a hold where the item's holding branch does not match
the pickup branch
6) Check in the item
7) Note it is not trapped for the hold
8) Update the item's holding branch to match the pickup branch
8) Check in the item
9) Note the item is trapped for the hold
10) Repeat steps 4-9 but for home branch instead
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
perl -p -i -e 's/^.*set the version for version checking.*\n//' **/*.pm
+ manual adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^(use vars .*)\$VERSION\s?(.*)/$1$2/' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
C4::Branch::GetBranchDetail retrieved library infos, it could be easily
replaced with Koha::Libraries->find
When this change needs other big changes, the unblessed method is
called, to manipulate a hashref (as before) instead of a Koha::Library
object (for instance when $library is sent to GetPreparedLetter).
Test plan:
1/ Print a basket group, the library names should be correctly
displayed.
2/ Enable emailLibrarianWhenHoldIsPlaced and place a hold, a HOLDPLACED
notice will be generated (focus on the library name)
3/ Edit a patron and change his/her library
4/ Generate the advanced notices (misc/cronjobs/advance_notices.pl) and
have a look at the generated notices
5/ Same of overdues notices
6/ Set IndependentBranches and use a non superlibrarian user to place a
hold. The "pickup at" should be correctly filled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
It's a bit confusing to have RESERVESLIP named "Hold Slip", we should
finish the job and recode the slip.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Try printing a hold slip, you should note no difference
from pre-patch behavior
Followed test plan. The slip is triggered if you want to check out
an item that is reserved / on hold for another patron. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Currently the fee is applied on if all items for the record are issued
and at least one hold already exists on the record.
This patch does not give a complete answer to the problem (see
discussion on bug 13592 for the other user's expectations).
It only adds the ability to charge for any hold placed regardless of the
conditions.
Test plan:
1) Execute the updatedb entry to insert the new pref
2) Confirm that the behavior is the same as before applying this patch
3) Change the HoldFeeMode pref to 'always'
4) Note that the fee is applied for any hold placed
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The code is much more readable using the str param of output_pref
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes C4::Dates from following files in folder C4:
- C4/Members.pm
- C4/Reserves.pm
- C4/Search.pm
- C4/Utils/DataTables.pm
- C4/Utils/DataTables/Members.pm
- C4/VirtualShelves/Page.pm
To test:
-run tests as appropriate,
- have a close look at the code changes
- try to find regressions
http://bugs.koha-community.org/show_bug.cgi?id=14985
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Bug 14985: (followup) Remove eval if dates come from database
This patch removes some evals from date-formatting where the dates come
from the database.
See comments #7 - #9
Additionaly, C4/VirtualShelves/Page.pm is removed from the patches (obsolete).
Bug 14985: (followup) Remove C4::Dates from C4/Overdues.pm
Ths patch removes a stray C4::Dates from C4/Overdues.pm
- To test got to a patron who has overdues
(Home > Circulation > Checkouts > [Patron])
- Print overdues
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
