This patch adds a link to the Elasticsearch configuration page in the
administration sidebar menu when Elasticsearch is enabled.
This patch also corrects the title of the Elasticsearch page to match
the page heading. "Search engine configuration" instead of
"Elasticsearch mappings."
To test, apply the patch and set the SearchEngine system preference to
"Elasticsearch."
- View any page in the administration module which shows the
left-hand sidebar menu. The link to search engine configuration
should be there.
- View the search engine configuration page and confirm that the page
title is correct.
- Set the SearchEngine system preferenc to "Zebra."
- The search engine configuration link should no longer appear in the
administration sidebar menu.
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Improvements:
1) Index settings moved from code to etc/searchengine/elasticsearch/index_config.yaml. An alternative can be specified in koha-conf.xml.
2) Field settings moved from code to etc/searchengine/elasticsearch/field_config.yaml. An alternative can be specified in koha-conf.xml.
3) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch. An alternative can be specified in koha-conf.xml.
4) Default settings have been improved to remove punctuation from phrases used for sorting etc.
5) State variables are used for storing configuration to avoid parsing it multiple times.
6) A possibility to reset the fields too has been added to the reset operation of mappings administration.
7) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch.
8) An stdno field type has been added for standard identifiers.
To test:
1) Run tests in t/Koha/SearchEngine/Elasticsearch.t
2) Clear tables search_fields and search_marc_map
3) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4) Verify that admin/searchengine/elasticsearch/mappings.pl displays the mappings properly, including ISBN and other standard number fields.
5) Index some records using the -d parameter with misc/search_tools/rebuild_elastic_search.pl to recreate the index
6) Verify that you can find the records
7) Put <elasticsearch_index_mappings>non_existent</elasticsearch_index_mappings> to koha-conf.xml
8) Verify that admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1 fails because it can't find non_existent.
9) Copy etc/searchengine/elasticsearch/mappings.yaml to a new location and make elasticsearch_index_mappings setting in koha-conf.xml point to it.
10) Make a change in the new mappings.yaml.
11) Clear table search_fields (mappings reset doesn't do it yet, see bug 20248)
12) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
13) Verify that the changes you made are now visible in the mappings UI
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The last part of the preference description didn't show.
Moved behind the other text and rephrased.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note that these patches should be pushed along with bug 19984 to avoid
regressions (if the syspref is changed between the 2 update DB entries)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The goal to this enhancement is to add the ability to cancel a hold and
mark items as lost from the 'Holds to pull' page.
A new pref is added to control the behaviour, default is off
To mark items as lost you need to set the new pref CanMarkHoldsToPullAsLost to one of these two values:
- "Allow to mark items as lost"
=> The item will be marked as lost and the hold will be cancelled
- "Allow to mark items as lost and notify the patron"
=> Same as previously but the patron will be notified as well.
The notification is done using a new notice template (code=CANCEL_HOLD_ON_LOST).
Feel free to suggest another default wording.
To update the values of the items when one of these 2 buttons are used, you need to
fill the UpdateItemWhenLostFromHoldList with something like: 'itemlost: 1'
Test plan:
1/ Place holds on some items
2/ Go to Home > Circulation > Holds to pull
From here you can cancel the hold or
3/ Mark the items as lost
=> You will receive feedback messages depending on different situations:
* The CANCEL_HOLD_ON_LOST does not exist
* The patron does not have an email address (but the notice has been
enqueued! It is the current behaviour with other notices)
* The notice has been enqueued
* The hold has been cancelled
QA Notes:
From which library do we want to pick the notice? This patch use
reserves.branchcode
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Given the confusion regarding this behaviour it sounds better to make it
configurable.
This pref will take 4 different values, 1 per place an item can be
marked as lost.
Test plan:
Mark items as lost and confirm the item is returned or not, depending on
the value of the system preference.
- from the longoverdue cronjob (--mark-returned takes precedence if set)
- from the batch item modification tool
- when cataloguing an item
- from the items tab of the catalog module
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a new system preference MarcFieldDocURL. Setting it to some URL
will make all the MARC documentation links point to that in
the MARC edit UI. Leaving the value empty will use the old defaults
(http://loc.gov for MARC21 and http://archive.ifla.org for UNIMARC).
There are some possible substitutions usable in the URL:
- {MARC} is replaced with either "MARC21" or "UNIMARC"
- {FIELD} is replaced by the MARC field number, eg. "000", "048", ...
- {LANG} is replaced by the UI language, eg. "en", or "fi-FI"
To test:
1) Go to Cataloguing > New record
2) Clicking on the question mark links in the MARC edit will
open a window to either loc.gov or archive.ifla.org
3) Install patch, run updatedatabase, etc
4) Redo parts 1, and 2.
5) Set the value of MarcFieldDocURL to
http://example.com/?field={FIELD}&marc={MARC}&lang={LANG}
6) Redo parts 1 and 2
7) Clicking on the question mark links in the MARC edit will
open a window to example.com, with the proper substitutions
in the URL for the field, marc flavour and language
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The translate script raised an error:
Use of uninitialized value $pref_name in concatenation (.) or string at
LangInstaller.pm line 190.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset allows for use of a separate Novelist profile for the
staff client and opac. This allows Novelist to determine links and
special styling for each. Testing is best with novelist credentials,
however, confirming that values are set and used correctly and nothing
is broken should suffice.
To test:
1 - Apply patches
2 - Update database
3 - View detail pages for some records on opac and staff client and ensure no changes have been
made
4 - Enable NovelistSelectStaffEnabled (and enter or have info in the Profile and password)
5 - Set NovelistSelectStaffView to 'above'
6 - View detail pages for some records, verify that if novelist info is
available it is displayed and nothing is displayed if not
7 - Repeat with all staff view options
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Having to write [% KOHA_VERSION %] for each url is bad because:
- It's easily forgettable when adding new <script> or <link>
- It prevents grep'ing for the full filename
- It violates the DRY principle
- If at some point we want to change the "force js and css reload"
mechanism, it will be tedious
This patch:
- adds a Template::Toolkit plugin that generates <script> and
<link> tags for JS and CSS files, and inserts automatically the Koha
version in the filename
- use the new plugin to remove all occurences of [% KOHA_VERSION %]
- remove the code that was adding KOHA_VERSION as a template variable
Test plan:
1. Apply patch
2. Go to several different pages in Koha (opac and intranet) while
checking your browser's dev tools (there should be no 404 for JS and
CSS files, and the Koha version should appear in filenames) and the
server logs (there should be no "File not found")
3. `git grep KOHA_VERSION` should return nothing
4. prove t/db_dependent/Koha/Template/Plugin/Asset.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Including:
[1] Atomic update to add pref for existing installs
[2] Add new pref to sysprefs.sql for new installs
[3] Add description to authorities preference file.
Test plan:
[1] Run new install or upgrade to add pref.
[2] Check value of pref via System preferences in staff interface.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the possibility to define default indicators in
the MARC frameworks. It adds 2 columns in the marc_tag_structure table in
the database in order to accomplish this. All files that reference this
table have also been updated to reflect these added fields.
Test: Add or edit a MARC framework. In the Field list should be 2 extra
columns. It should be possible to add default indicators (1 character)
in these fields. Nothing else should have changed in the meantime.
The default indicator values are not yet visible in the cataloguing module.
The default values are also loaded in the cataloguing form.
Test: Define default values in some MARC framework. Go to cataloguing
and create a new record using this framework. Verify that the defined
defaults are visible when set. Verify the default is empty (as before)
if no default was set. Verify that if the default is changed, the
record is saved with the manually changed value. Verify that upon
changing such a new record, the manually set indicator value is used
and not the default one from the framework.
Don't forget to run database and database schema update
Signed-off-by: Eugene Jose Espinoza <eugenegf@yahoo.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The ACQ MARC framework is only used for the ‘Item’ block.
This patch add the ability to define biblio fields (!= 995 or 952) to
customize the display of the bibliographic details when ordering.
This new feature is controlled by a new pref:
UseACQFrameworkForBiblioRecords
Test plan:
- Create a new installation to populate the ACQ framework correctly
- Set the pref UseACQFrameworkForBiblioRecords to "Use"
- Create a new order
=> You will see the lib from the ACQ framework
- Add/remove/update biblio subfields in the ACQ framework
- Create a new order
=> You should see the new subfields displayed
Note for QA: I though I would be able to refactor existing code to make
it more flexible, but it is a bit messy and lost a lot of time. I
finally decided to copy/paste the existing code. I simplified it as, I
think, we do not want the plugin, etc. like in the full biblio editor.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - View sysprefs
2 - Note 'Labs' tab
3 - Note EnableAdvancedCatalogingEditor is the only pref there
4 - Note that prefs works
5 - Apply patch
6 - Note 'Labs' tba is gone
7 - Check the 'Cataloging' tab (under Interface)
8 - There it is!
9 - Verify it still works
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I guess a native English speaker will have a better wording :)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If we depend on the order, we should make it sortable.
I let the customization to someone else (we would need an icon to tell
the user it's sortable).
Something does not work here:
If fr-FR and fr-CA is installed, but only 1 is ticked, it will be
considered as last. I do not think it's a blocker as it does not make
really make sense to have it installed but not used (the interface is
also weird, there is a dropdown list with only 1 entry)
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Apply patches
2 - Upgrade database
3 - Check the staff client login page, should be no change
4 - Add something to the preferene
5 - It should appear on the login page
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates a warning message and error message in the Search
engine configuration for Elasticsearch.
Note: elasticsearch does not need to be active in order to test.
To test warning message:
1. go to: cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl
2. note the warning message
3. Apply patch
4. Note the change in warning message. Confirm it makes sense.
To test error message:
Apply patch and check the changed message in the template file mappings.tt and confirm it makes sense.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates various unrelated templates to use the Bootstrap
grid.
- about.tt - The about page
- auth.tt - The login page
These pages should look correct.
- reports/reports-home.tt - The reports home page
- admin/admin-home.tt - The administration home page
These pages should look correct, with a single centered column
with wide margins on either side. At lower browser widths the margins
should disappear.
- serials/subscription-add.tt - Serials -> Add subscription. The entry
form should look correct during each step of the add/edit process.
- suggestion/suggestion.tt - Acquisitions -> Suggestions -> New
suggestion. The page with the new suggestion form should look correct.
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In order to make this module unrelated to the SCO module, this
patch introduces the following sysprefs:
- SelfCheckInMainUserBlock
- SelfCheckInModuleUserID
- SelfCheckInTimeout
- SelfCheckInUserCSS
- SelfCheckInUserJS
It also adds a new user flag and sub-permission:
- self_check => self_checkin_module
and moves the circulate => self_checkout permission into
- self_check => self_checkout_module
Descriptions are adjusted accordingly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Template smart-rules.tt in administration contains some if/elsif/else with translatable strings.
For example :
[% IF rule.onshelfholds == 1 %]
Yes
[% ELSIF rule.onshelfholds == 2 %]
If all unavailable
[% ELSE %]
If any unavailable
[% END %]
Adding span to translatable strings will allow to have the same translation than :
<select name="onshelfholds" id="onshelfholds">
<option value="1">Yes</option>
<option value="0">If any unavailable</option>
<option value="2">If all unavailable</option>
</select>
This is important to allow editing an existing circulation and fine rule.
Actually for example in french some strings are translated differently :
msgid "%s Yes %s If all unavailable %s If any unavailable %s"
msgstr "%s Oui %s Si tous indisponibles %s Si aucun indisponible %s"
msgid "If any unavailable"
msgstr "Si au moins un exemplaire est indisponible"
Test plan :
1) Look at PO files, for example fr-FR and see there is :
msgid "%s Yes %s If all unavailable %s If any unavailable %s"
msgid "If any unavailable"
2) Apply patch
3) update PO files
4) Look at PO files, for example fr-FR and see there is now only :
msgid "If any unavailable"
5) Install translation
6) Go to Administration > Circulation and fine rule
7) Check that when editing an existing rule, edition comboboxes are set on the correct value
8) Create a default holds policy by item type and check that correct values are displayed in table
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a check in admin-home.pl to see whether plugins are
enabled. If plugins are disabled, the link to plugins management is
hidden even if the user has plugin management permission.
To test, view the administration home page with plugins enabled and
disabled via the enable_plugins flag in the Koha configuration file.
Also test using users with different plugins permissions:
- Plugins enabled
- CAN_user_plugins = 1
-> Plugins link appears
- CAN_user_plugins = 0
-> Plugins link hidden
- Plugins disabled
- CAN_user_plugins = 1,
- CAN_user_plugins = 0
-> Plugins link hidden
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Make the "Disable" checkboxes in transport cost matrix translatable
Test plan:
1) Go to Home -> Administration -> Transport cost matrix
2) Click on any cell
3) Note the "Disable" checkbox text
4) Install patch, add a language, translate the text, etc
5) Repeat 1-3, the "Disable" text should now be translated
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Allow translating one error message
- Use string formatting with placeholders instead of concatenation
Test plan:
1) Go to Home -> Administration -> Koha to MARC Mapping
2) Click on the "Add" button to add a new mapping
3) Note the popup text looks correct
4) Enter something invalid
5) Note the error message
6) Click on any of the "Remove" buttons to remove a mapping
7) Note the popup text looks correct
8) Update, translate the new msgid's, and install a language
9) Repeat 1-7, note how the message are in the correct
language
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Added missing upgrade SQL system preference.
Corrected system preference screen message
Fixes on purge_suggestions.pl
- perlcritic friendlier
- address $PERL5LIB comment by using $PROGRAM_NAME (comment #10)
- used STDERR (comment #10)
- perltidy
TEST PLAN
---------
$ ./installer/data/mysql/updatedatabase.pl
-- should run upgrade and generate new systempreference in table
$ ./misc/cronjobs/purge_suggestions.pl --help
-- should give help with a real path used instead of $PERL5LIB.
$ ./misc/cronjobs/purge_suggestions.pl -days -1
-- should give error message as expected
$ ./misc/cronjobs/purge_suggestions.pl -days 0
-- should give error message as expected
Go to OPAC system preferences tab and check the
PurgeSuggestionsOlderThan system preference
-- message should be as expected (see comment #9)
run koha qa test tools
-- all should pass
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Moved new pref from OPAC to Acquisitions preferences.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The system preferences value is used whenever purge_suggestions.pl is called without the 'days' parameter.
This patch uses the preference description suggested by comment #9.
This version should now be cleanly applicable.
I Apply the patch
II Run updatedatabase.pl
a) Run purge_suggestions.pl without the days parameter
- validate that there is an error message
b) Run purge_suggestions.pl with the days parameter
- validate that there is no error message
c) Insert a number of days in the system variable PurgeSuggestionsOlderThan
d) Run purge_suggestions.pl without the days parameter
- validate that there is no error message
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested per plan, all tests pass.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Allow translating two strings in the OAI set config:
"setDescription" and "Remove"
Test plan:
1) Go to Home -> Administrator -> OAI sets config -> Add a new OAI set
2) Click on "New set"
3) Click on "Add description"
4) Note the "setDescription:" and "Remove" -texts
5) Install patch, update language, translate the new strings
6) Redo 1-4, note how the strings in part 4 are now translated
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi>
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
[ Moved from 20075 to 20074 ]
Since hidden is used as a boolean, it makes more sense to save the values
0 and 1 instead of 0 and -5.
Test plan:
Test toggling between Show all and Hide all in the auth frameworks.
Run the db rev.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The template included an else branch where a value not equal to 0 or -5
was interpreted as 0 (Show all).
This effectively converted hidden values 1 and 8 to 0.
This patch removes that else branch.
Test plan:
Toggle a authority field between Hide all and Show all. Check what happens.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the same feature as bug 10858 for the OPAC interface:
after a search, librarians will be able to browse selected results.
The results can be selected from several pages.
By extension it is possible to add results from several pages to a list
or the cart.
When at least one result is selected, a new "Browse selected records" button
becomes usable and change the behaviour of the existing browser.
The whole feature can be turned off with the pref BrowseResultSelection.
Test plan:
- Launch a search (on the staff interface)
- Check some biblios
- Go on another page
- Check some biblios
- Come back to a page you already check results and confirm that they are
still checked
- Click on the "Browse selected records" button
- Check that you are able to browse results you had checked.
You can also:
- add them to the cart
- add them to a list
QA note: the browsers at the OPAC and the one at the staff interface are completely different
That's why the code is not mimicking what has been done on bug 10858.
The behaviour must stay the same anyway.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Before this patch set, we used KohaTable to display a table with the
column visibility plugin, and an usual dataTable initialisation for the
filters.
For the lost items report table we will need both.
To do so we need to reorganize the code a bit
We cannot pass a selector but the id of the node which represents the
table. Indeed it is how works currently the filters (we may want to
improve that later)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In order to simplify and make uniform the code, the controller scripts send
a Koha::Patron object to the templates instead of all attributes of a patron.
That will make the code much more easier to maintain and will be less
error-prone.
The variable "patron" sent to the templates is supposed to represent the
patron the librarian is editing the detail.
In the members module and some scripts of the circulation module, the
patron's detail are sent one by one to the template. That leads to
frustration from developpers (making sure everything is passed from all
scripts) and to regression (we got tone of bugs in the last year because
of this way to do).
With this patch set it will be easy access patron's detail, passing only
1 variable from the controllers.
Test plan:
Play with the patron and circulation module and make sur the detail of
the patron you are editing/seeing info are correctly displayed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Caused by a bad merge conflict on bug 12768.
To test:
1 - Edit an item type, define a replacement cost,processing fee, and
remote image url
2 - Save the item type
3 - Values are correct in list
4 - Edit again
5 - note values in fields are not populated
6 - Save itemtype, values are lost
7 - Apply patch
8 - Repeat 1-4
9 - Values should be correctly populated and saved now
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 20216: (follow-up) - Fix other use of remote_image
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the staff client patron module templates so that
JavaScript is included in the footer instead of the header.
This patch touches a lot of files because the changes are all
interdependent, affecting a couple of module-wide include files.
To test, apply the patch and test the JavaScript-driven features of the
modified templates: All button controls, DataTables functionality, tabs,
etc.
Patrons -> Patrons home, patron search results
-> Manage pending modification requests
-> Patron detail page
-> Edit patron
-> Set guarantor
-> Fines
-> Account, Pay fines, Create manual invoice, Create manual
credit
-> Print receipts for different kinds of charges
-> Routing lists
-> Circulation history
-> Holds history
-> Notices
-> Statistics
-> Files
-> Purchase suggestions
-> Discharges
-> Housebound
-> Set permissions
-> Change password
-> Print summary, slips, and overdues
-> Update child to adult patron type
Patron toolbar and patron search bar operations should work correctly on
all pages.
This patch also updates the template for searching the Norwegian
national patron database, but it has NOT been tested.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Zoe Bennett <zoebennett1308@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Changes made by bug 12904 appear to have affected TinyMCE.
Test plan:
1) Edit a library, note the OPAC info editor is missing
2) Apply this patch
3) Reload the page
4) The editor is back!
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
With this syspref enabled scanning a patron barcode into the item
barcode field during circulation will redirect you to the patron's
circulation page.
This allows circulation with only a barcode scanner.
Testing:
- Enable the AutoSwitchPatron syspref
- Navigate to a patron's check out screen
- Enter a patron barcode into the "Enter item barcode" field
Result
- Browser should be redirected to the entered patron
Signed-off-by: Joel <aloi54@live.fr>
Followed test plan, patch works as described
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
