Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
I don't speak spanish, so my signoff is just a technical view of the patch
Now it more closely matches the one that's distributed in /etc
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
(not tested. I confirm the code is clean, and tests are not broken)
Prior to this patch, the koha-restore Debian script did not set the home
directory properly for the system users it created, causing problems down the
line for koha-rebuild-zebra. This patch fixes that by specifying the home
directory.
http://bugs.koha-community.org/show_bug.cgi?id=7216
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Sometimes zebra needs a tmp dir in order to work. This ensures that it
is created both by koha-create-dirs in the packages, and by
rebuild_zebra when it runs.
--
tested ok, signing off
Signed-off-by: Mason James <mtj@kohaaloha.com>
If you accidentally delete one of the files that koha-remove is supposed to
remove, when koha-remove reaches that point in the script, it will die, leaving
later removal steps undone. This patch fixes the problem by checking for the
existence of each file prior to deleting it, so that short of an actual problem
with removing the file, the script can continue. Note that the fix for bug 6929
is also needed to prevent any problems with stopping Zebra from killing
koha-remove.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
This brings all the changelog entries for releases up to what has been
included in the packages
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This updates the default version number that packages are build with to
be 3.7. This should be applied to master only.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Add DocBook manual pages for commands that do not have a manual page yet. Also
add a page for koha-common itself, listing all the available commands.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Minor change: I fixed a typo I spotted
Currently, if it attempts to stop a zebra process that doesn't exist,
the script will abort, which leaves things running. This patch prevents
it from aborting.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Also fix the example so that it is there.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This uses the docbook source files to generate the man pages, and
installs them to their correct location when the packages are being
built.
This will make it easier for people to write man pages, thereby ensuring
that people join in keeping documentation up to date.
Note: adds docbook-xsl and xsltproc to the dependencies.
Note2: applies on top of Magnus' other patch on this ticket.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch
- deletes debian/scripts/koha-create.8
- adds debian/docs/koha-create.xml and koha-remove.xml
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This affects only koha package installations that have multiple
instances running. After this patch, it's worth running the upgrade
again to ensure that everything happened correctly the first time.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The revised patch quotes the variable $mysqldb, as suggested by Frère
Sébastien Marie.
This patch makes sure that pointing DEFAULTSQL in /etc/koha/koha-sites.conf
to any (gzip'ed) file produced by mysqldump works, by adding the name of the
database to the end of the call to mysql, when the specified SQL file is
loaded. Files produced with koha-dump-defaults should still work too.
To test:
- Apply the patch
- Create a new package with build-git-snapshot
- Install the package
- Create an SQL file from an existing installation with mysqldump
- gzip the SQL file
- point DEFAULTSQL to the file in /etc/koha/koha-sites.conf
- create a new site with koha-create --create-db
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
(to be followed by another patch that I think helps too)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Sets the default borrowernumber of staff user to 1 and makes it possible
to override this with ADMINUSER in /etc/koha/koha-sites.conf or with the
--adminuser and -a command line options.
Remember to update the wiki if this gets pushed!
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This allows the build information to not be suppressed when using
build-git-snapshot. This makes seeing where problems are substantially
easier.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
koha-create would fail to check that --configfile was set on the
commandline, before either including it if it existed or dying if
it did not. This patch should make sure the existence of a
configfile is only tested if --config is set.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
This should apply against 3.4 and master.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This lets you get into the mysql session for this library instance
really easily. Probably most useful for developers.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This allows the database details (username and database name in
particular) to be modified in between a koha-create --request-db and
--populate-db. Most useful when you discover that the username is too
long or something. Now, when populating the database, the connection
information is reloaded from the koha-conf.xml rather than being
generated from the instance name.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This causes backups for the last two days to be stored by default. The
backups will go into /var/spool/koha.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Order of precedence for config options, from lowest to highest:
1. The defaults set in koha-create itself
2. /etc/koha/koha-sites.conf
3. Config file specified with --configfile
4. Individual options set with --marcflavor, --zebralang, --defaultsql
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This will override the setting in /etc/koha/koha-sites.conf.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This adds the --marcflavor and --zebralang commandline options, as
well as short versions of all options.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
As systems (Ubuntu already, Debian testing is doing it too) move to
ramdisking /var/run and /var/lock, or otherwise clearing them on boot,
we need to ensure that they're there when we need them. This patch
autocreates any directories that are missing when the init script runs.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This commit does the following:
* Merge the changelog from the releases of 3.2
* Adds a command 'koha-upgrade-to-3.4' that does the MARC item splitting
stuff.
* Adds a debconf note to make sure people know that they need to run
the above command.
* Fixes the inclusion of jQuery in the packages.
* Makes build-git-snapshot build packages with a 3.5 version.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This keeps the package versions of the zebra configuration in sync with
the makefile-installed ones.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This adds the required changelog changes to keep it current for the
3.2.1 release. It is intended to go straight into 3.2.x, and probably
should go into master also.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
