Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Desired behavior of the script advance_notices.pl is that the sender
address on the notice message is that of the branch of the issues in
question. Thus, the solution is to generate digest messages per
branch.
To test:
1) Inspect unit test in t/db_dependent/cronjobs/advance_notices_digest.t and note that:
- There are three libraries
- There is a borrower
- The borrower is registered at library1
- The borrower has message preference wants_digest set to 1
- The borrower has message preference days_in_advance set to 1
- The content of the letter PREDUEDGST is '<<count>> <<branches.branchname>>'
- There are three items
- There is one issue per item
- There is one issues at library2
- There are two issues at library3
- The date_due of the issues are set to tomorrow
- For the default case (no -digest-per-message)
- It is asserted that there is one message in the message queue after running the script
- It is asserted that there are three items in the message.
- It is asserted that the branchname is that of the borrower's home library.
- For the case where -digest-per-message is enabled
- It is asserted that there are two messages in the message queue after running the script
- It is asserted that the item count of the message corresponding to library2 is 1
- It is asserted that the item count of the message corresponding to library3 is 2
- It is asserted that the branchnames are correct.
2) Run unit test: prove t/db_dependent/cronjobs/advance_notices_digest.t
Sponsored-By: Bibliotek Mellansjö, which is a cooperation between
Sponsored-By: Gullspångs kommunbibliotek
Sponsored-By: Hjo stadsbibliotek
Sponsored-By: Karlsborgs bibliotek
Sponsored-By: Mariestads stadsbibliotek
Sponsored-By: Skövde stadsbibliotek
Sponsored-By: Tibro bibliotek
Sponsored-By: Tidaholms stadsbibliotek
Sponsored-By: Töreboda kommunbibliotek
Signed-off-by: Andreas Jonsson <andreas.jonsson@kreablo.se>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Adding the --digest-per-branch switch turns the digest into one digest per
library. I think it makes perfect sense to keep the default behaviour
and hide this new functionality behind a command line switch.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
prove t/db_dependent/api/v1/acquisitions_funds.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also, perform an exact search when searching on the fund owner id.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new route to the REST api:
/api/v1/acquisitions/funds/
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes some page-specific style from the item detail page in
the staff client and adds some markup in order to trigger a more
generally-used style.
This patch also adds a font-awesome icon to the "Edit item" link on the
page.
To test, apply the patch and regenerate the staff client CSS. Open a
bibliographic record and view the "Items tab."
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch corrects the element passed to the hc-sticky plugin to define
which element the floating toolbar sticks to.
To test, apply the patch and perform a search in the staff client which
will return multiple results. Confirm that scrolling down the page
triggers the floating toolbar.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This follow-up revises the style of the search result browser in the
staff client, making it behave better at smaller browser widths.
The patch also makes a couple of ESLint-prompted changes to browser.js
To test, apply the patch and regenerate CSS.
- Perform a catalog search in the staff client.
- Click on one of the search results.
- On the bibliographic detail page there should be results browsing
controls in the left-hand sidebar.
- Resize the browser window and confirm that the controls work well
at various sizes.
- Test with both the first and last search result.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies several catalog templates to use the Bootstrap grid
instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags and "text/css" attributes from <style> tags in the
modified templates.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
- Catalog -> Search
- Search results
- Bibliographic details
- MARC details (viewMARC preference enabled)
- Labeled MARC details (viewLabeledMARC preference enabled)
- ISBD (viewISBD preference enabled)
- Items
- Checkout history
- Rota (stock rotation)
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The PrepareItemrecordDisplay method used to generate the item
display on receiving serials was using a hardcoded maxlength
of 255 on input fields. This patch updates it to use the
maxlength defined in the frameworks instead as the normal
item form does.
To test:
- Create or reuse an existing subscription
- Make note of the framework the record uses
- Add an item on receive
- Check the maxlength on the various fields is set to 255
(check source code or use developer tools)
- You can also verify that by adding a long note to
one of the note fields
- Apply patch
- Repeat tests, the maxlength should now be 9999
- In your framework settings, change the length of one
of the subfields to another value
- Verify that the item form reflects the change
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This fixes the same issue where "title" is being translated (in fr-CA at least) and thus
break the javascript impacting the result display in the OPAC
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Adds a xsl:value-of tag to prevent the value from being translated.
TEST PLAN
0) Apply patch
1) Translate
2) In the opac, div.record has not changed
NOTE:
I don't know if this bug affects all translations, I noticed it when translating to fr-CA.
The fix will work for all languages.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
Attempt to create a manual fine from the patron accounting page, it
should fail.
Apply this patch, restart the things
Attempt to create a manual fine from the patron accounting page, it
should succeed.
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
Enable OpacResetPassword
Create a borrower with a username and password
Go to the OPAC, try to reset the password (I always get the reset link
token out of the message_queue in the database rather than worry about
receiving the actual email. You do you.)
Go to the link provided.
Attempt to set a password, this should fail.
Apply this patch
Go through the process again, password should be reset.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
columns.def is used to define descriptions of db columns in guided
reports
test is not useful anymore IMO
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Play with fines, should work OK
2) Try to print receipts on fines - prinfeercpt.pl, printinvoice.pl
3) git grep getnextacctno -> no occurences
4) git grep accountno should return only:
installer/data/mysql/atomicupdate/bug_21683_remove_column_accountno.perl
installer/data/mysql/update22to30.pl
misc/release_notes/release_notes_3_10_0.txt
misc/release_notes/release_notes_3_22_0.txt
5) prove
t/db_dependent/Accounts.t
t/db_dependent/ILSDI_Services.t
t/db_dependent/Stats.t
t/db_dependent/Koha/Account.t
Rescued-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
this makes the work with barcodes from input consistant on checking out,
checking in and renewing
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In Circulation->Renew, the renew feature does not check the system
preference itemBarcodeFilter to see whether the barcode needs to be
converted. This patch fixes this, adding a check for the system pref and
applying it accordingly to convert the barcode if it is needed.
Test plan:
1) In Circulation->Renew, enter a barcode that you know exists in the
catalogue but add extra spaces, breaking up the barcode. Note that this
fails with a warning that says 'No item matches this barcode'
2) In system Preferences, set the itemBarcodeInputFilter pref to Remove
spaces and repeat step1. Note that the result is the same as in step 1
3) Apply the patch
4) Repeat step 1, and note that the filter removes the spaces and the
item is renewed (or gives an error that indicates it recognises the
barcode)
Sponsored-by: Catalyst IT
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel's comments pointed out that while I tried to avoid storing
rounded values it is required for tax generation.
This patch makes that change and adds test coverage and POD for
populate_order_with_prices
To test:
Follow plan on other patches, ensure that orders and totals match on the
basket, invoice, and budget pages
prove -v t/db_dependent/Acquisition/populate_order_with_prices.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Running t/db/Budgets.t:
Use of uninitialized value in join or string at C4/Biblio.pm line 3334.
Test plan:
Run again. Verify no warnings left.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] Add trivial subtest in t/Number/Price.t
Checking a negative number and a large number for the MAX_INT change.
Note: Confusing to have t/Prices.t too.
[2] Change UNSIGNED to SIGNED in get_rounding_sql. Although I did not spot
problems with negative prices, we theoretically could while casting.
cast(-2 as unsigned) == 18446744073709551614
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] Resolve warnings like:
Use of uninitialized value $rounding_pref in string eq at /usr/share/koha/devclone/C4/Acquisition.pm line 2040.
[2] Fixing unusual use of whitespace too.
[3] Remove list operator from get_rounding_sql return. Only used in scalar
context.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
More recent MySql versions require the use of SIGNED or UNSIGNED rather
than INTEGER. UNSIGNED will still work in older installs
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
prove -v t/db_dependent/Budgets.t
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch:
Adds a missing use
Uses 'Koha::Number::Price->round()' instead of 'format()' to ensure numeric
returns
Ensures too big numbers don't crash round()
Uses syspref in 'GetBudgetHierarchy'
To test:
Follow previous test plan
Check values on admin/aqbudgets.pl are affected by syspref
Ensure values throughout acquisitions are correctly calculated/displayed
(even when greater than 1,000)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We now fully cover GetBudgetsPlanCell in these tests
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
prove t/db_dependent/Budgets.t
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Unit tests to highlight the issue
To test:
Prove t/db_dependent/Budgets.t
prove t/Acquisition.t
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
Place an order (no tax just for simplicity)
listprice/rrp = 16.99
discount = 42%
quantity = 8
estimated calculated at 9.85
but order total is 78.83, but 8 times 9.85 = 78.80
Apply patches, set OrderPriceRounding syspref to 'Nearest cent'
Not order total is now as expected
View ordered.pl and confirm values are correct
Complete order, view invoice and confirm values
View spent.pl and confirm values
Go through acquisitions module and confirm prices throughout are
correct.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
