To test:
1. Go to Koha administration -> Item types. Add a new item type "B" with the description "Test" so it will be obvious if it is sorted by the code "B" instead of the description "Test".
2. Go to Acquisitions. Add to a basket from a new empty record
3. In the Catalog details section, note the Item type dropdown. Confirm your "Test" item type, is showing near the top of the list, indicating it has been sorted based on the code "B"
4. Apply patch and restart services. Refresh the page.
5. Open the Item type dropdown again and confirm your "Test" item type is showing in the expected alphabetical order.
NC amended patch - tidied
Sponsored-by: South Taranaki District Council
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sometimes it's really helpful to see all orders for a basket, a
vendor or a standing order, including the cancelled ones.
Currently this is not possible, as we have search options for
every single status and one for "any except cancelled",
but no "Any status" option.
This patch adds the "Any status" option. The sometimes
appearing empty entry is updated to "Any status except cancelled"
as this is what it does.
Testing data:
* Requires multiple order lines with different order status
* Must include at least one order line with status 'cancelled'
To test:
* Go to acquisitions
* Open the advanced search page from the top search options:
Order search > config icon > Advanced search link
* Verify the status pull down looks as described above
* Apply patch
* Verify there is now an "Any status" option in the pull down
* Try searches for different status, including "Any status"
* Verify the results are as expected
* Create a new basket
* Create an order line by 'From an existing order (copy)'
* Verify the search form there also works as expected
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch depends on Bug 31840.
To test:
1) Edit an order and increase the price so that you would expect it to
trigger a warning that you will exceed the amount allowed for this Fund
2) Confirm the warning is triggered
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Apply patches
2. sudo koha-upgrade-schema <instance>
3. Restart services
4. Set TaxRates syspref = 0.15
5. Create a new fund with amount = 1000
6. Add an order to a basket with the following values:
- Fund = Choose the fund from step #5
- Quantity = 1
- Vendor price = 10
- Tax rate = 15%
- Discount = 20%
- Retail price = 10.00
- Replacement cost = 10.00
- Actual cost = 10.00
- Ensure the basket belongs to a vendor with ("List prices" = "Don't include tax" and "Invoice prices" = "Don't include tax")
7. Go to the Acquisitions home page
8. Confirm the 'Ordered' column for the step #5 fund contains 9.20
9. Click on the 9.20 link and confirm the ordered.pl page that loads
also contains 9.20 as the 'Subtotal'
10. Change 'CalculateFundValuesIncludingTax' = 'Exclude'
11. On the Acquisitions home page confirm the 'Ordered' column now
contains 8.00
12. Click on the 8.00 link and confirm the ordered.pl page also contains
8.00 as the 'Subtotal'
13. Close your basket and receive your order - change the 'Actual costs'
= 8.00 (the $10 retail price less the 20% discount, tax exclusive)
14. Go to the Acquisitions home page and confirm the 'Spent' column now
contains 8.00
15. Click on the 8.00 link and confirm the spent.pl page also contains
8.00 as the 'Subtotal'
16. Change 'CalculateFundValuesIncludingTax' = 'Include'
17. Confirm the 'Spent' column on the Acquisitions home page now shows
9.20
18. Click on the 9.20 link and confirm the spent.pl page also contains
9.20 as the 'Subtotal'
Sponsored-by: Waikato Institute of Technology, New Zealand
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds Authorized Value handling for the display of sort1 and
sort2 fields in the acquisitions basket display page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: emlam <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is no need for this code to have a hard coded list of fields directly in the code.
Any invalid keys would be skipped anyway.
If we refactor this code then adding new fields will be much simpler.
Test Plan:
1) Set up your MARCItemFieldsToOrder, verify everything is working
2) Apply this patch
3) Restart all the things!
4) Verify there has been no change to the MARCItemFieldsToOrder
functionality
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
These values are stored at the order level, not per item. This patch simply sets the order values from the values retrieved from MarcFieldsToOrder even inf MarcItemFields to order is being used for other fields
To test:
Setup -- Set systempreferences below
MarcFieldsToOrder:
price: 949$g
quantity: 949$k
budget_code: 949$l
discount: 949$m
sort1: 949$n
sort2: 949$q
MarcItemFieldsToOrder:
homebranch: 949$a
holdingbranch: 949$b
itype: 949$y
nonpublic_note: 949$x
public_note: 949$z
loc: 949$c
ccode: 949$8
notforloan: 949$7
uri: 949$u
copyno: 949$t
price: 949$g
replacementprice: 949$v
itemcallnumber: 949$o
quantity: 949$k
budget_code: 949$l
Stage the attached bib-303.marcxml file
Add to basket from the staged file
Note that discount and sort1 and sort2 are not populated per the Marc
Apply patch, restart all
Stage and add to basket again
Confirm discount and sort1 and sort2 are populated correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At the moment it's quite a lot of clicks to get from the basket
summary to the invoice something was received in. This adds a nice
shortcut by creating a new column for the invoicenumber in the basket
summary table.
To test:
* Make sure you have a basket with some received and unreceived
order lines
* Verify that the (received) shows for your received lines
* Verify no invoice number or link to it in sight
* Apply patch
* Verify that there is now a column for the Invoice containing
the invoice number as a link to the invoice
* Test with a staff patron, that doesn't have edit_invoices permission
* Verify that now instead of a link you see the invoice number as text
Be happy, sign off ;)
Note: this doesn't change the CSV export. The way the CSV is built is
quite different to the summary table, so it would be better handled
in a separate bug/patch. The columns are already quite different!
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Émily-Rose Francoeur <emily-rose.francoeur@inLibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows the default budget to be used as a fallback if no budget is selected. Currently the default budget is set using lines 129-133 but then is never used.
QA follow-up:
- perl tidied
- budget_codes changed to budget_ids for consistency
Test plan:
1) Apply patch
2) restart_all
3) Follow the steps from the bug description
4) Order lines should be added properly
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Rearranged comments
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the dropdown to use select2 and avoids loading all
vendors at page load.
To test:
1 - Create some extra vendors in your system, ideally over 20
2 - Search for a vendor in acquisitions
3 - Click 'New->basket'
4 - Note the dropdown of all vendors
5 - Choose a vendor and create a basket
6 - Apply patch
7 - Repeat
8 - Note only a partial list of vendors is loaded
9 - Search in the dropdown and confirm vendors are returned
10 - Select a vendor and create the basket
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When an already received order line is modified/edited,
we experience data loss. Most prominently, we will lose the
linked invoiceid. Therefore we should not allow editing an
order line that was already received. If something needs to be
changed, the receipt should be cancelled first.
To test:
* Create basket as standing order with items added in cataloguing
* Add an order line
* Receive shipment
* Go to the basket summary page, click on 'Modify'
* Change the actual cost
* Save
* Verify that the invoice is now empty
* In the database aqorders.invoiceid will be NULL
* Apply patch
* Receive another shipment for the standing order
* Go back to basket summary page
* Verify the 'Modify' link is no longer present
* Click 'Modify' on the unreceived order line
* Edit the URL parameter odernumber to have the number of an
already received order line
* Verify you see a nice error message:
This order cannot be edited, the basket is closed or the order was already received.
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch is the main patch of this patch set, it contains the
controller acqui/vendor_issues.pl, its corresponding template, and some
links to this script.
It adds:
* A new DB table aqbookseller_issues linked with the aqbooksellers table
* A new subpermission acquisition.issue_manage
* A new authorised value category VENDOR_ISSUE_TYPE and two examples
MAINTENANCE and OUTAGE
* A new controller couple acqui/vendor_issues.[pl,tt]
Test plan:
0. Apply the patches, run updatedatabase and restart_all
1. Go to the acquisition module, create a new vendor or use an existing
one
2. Create a couple of issues for this vendor
3. Edit/Delete and search for those issues
This is the basics for tracking issues with vendors.
Suggestions welcome, on follow-up bug reports.
Signed-off-by: Jonathan Field <jonathan.fieeld@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When creating items at receiving, the generated data structure didn't
match what the code expected, so this patch adapts the code to match the
new data structure introduced by bug 8179.
Once I fixed that, I noticed that the $.ajax request payload, when it
contains an array parameter, it renames it like `param[]`. So the
finishreceive.pl controller is adjusted to this behaviour for the 'on
receiving' use case.
To test:
1. Apply this patch
2. Create a basket with 'create items on receive'
3. Create an order line
4. Close basket
5. Receive shipment
6. Enter invoice number
7. Click on Receive link in the table
8. Fill out item form, make sure all mandatory fields are set
9. Save
10. Verify that the order line is marked as 'received'
11. Verify that there item is created on the record
=> SUCCESS: Works as expected
12. Sign off :-D
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows to create additional fields for order lines.
Once created, these fields can be filled during order line creation or
modification.
If additional field is linked to a MARC field, there are two possible
scenario:
- MARC field mode = get: The field cannot be modified and its value is
retrieved from the bibliographic record (current behaviour)
- MARC field mode = set: The field can be modified and its value is
saved to the bibliographic record (new behaviour)
If additional field is linked to an authorised value category, then
authorised values are used. If not directly linked to an authorised
value category, but linked to a MARC field, a search for an AV category
is made on MARC default framework.
This patch doesn't display additional fields value anywhere (except in
order line creation/modification). Future patches will do that.
Test plan:
1/ Go to Acquisitions home
2/ In the left menu, click on "Add order line fields"
3/ Click on "New field" button
4/ Give the field a name (unique), no AV category and no MARC field.
5/ Save.
6/ Create 5 other fields:
a/ no AV category, a MARC field not linked to AV category, MARC field
mode = get
b/ no AV category, a MARC field not linked to AV category, MARC field
mode = set
c/ no AV category, a MARC field linked to AV category, MARC field
mode = get
d/ no AV category, a MARC field linked to AV category, MARC field
mode = set
e/ an AV category, no MARC field
7/ Create everything you need to be able to create order lines
(supplier, basket, ...)
8/ Create an order line. At bottom of the page, you should see your
additional fields, with authorised values dropdrown list for fields
(c), (d) and (e). Fields (a) and (c) should be disabled.
9/ Fill these fields with some data and save order line
10/ check that data was correctly saved into biblio for fields (b) and
(d), but not for (a) and (c)
11/ modify the same order line, check that values you've filled are
correctly retrieved and that values for (a) and (c) were correctly
retrieved from the bibliographic record
12/ modify all values, save, and check biblio once again
Signed-off-by: Harold Dramer <harold.dramer@nyls.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch implements the code to allow a patron to receive multiple
orders at the same time in /cgi-bin/koha/acqui/orderreceive.pl page
To test:
1. apply all patches
2. updatedatabase
3. Go to system preferences and allow AcqReceiveMultipleOrderLines
4. In acquisitions module, create a vendor if you don't have one and add
3 baskets.. one with create items on ordering, one with create items
on receiving and finally one with create items when cataloguing
5. Fill baskets with orders (There should be at least 15 orders in total). There should be a mix of orders created by suggestions, others by subscriptions and others by neither of those methods.
6. Close all baskets and receive shipment.
CHECK => in /cgi-bin/koha/acqui/parcel.pl page, in top table there is a column with checkboxes, and a button that says "Receive selected"
7. If all orders from all baskets are shown in the table, set the rows per page to 10, so table has more than one page
8. Check some of the checkboxes
CHECK => "Receive selected" button shows how many rows are selected
9. Go to the next page and select some more rows
CHECK => Changing page does not modify how many rows where selected
10. Go back to previous page
CHECK => Previously selected rows are still selected
11. Reload the page to deselect all rows
12. Select only one row and click on "Receive selected" button
CHECK => the page /cgi-bin/koha/acqui/orderreceive.pl behaves just the same as if the "receive" link in the selected row would have been clicked.
13. Click on cancel to go back to parcel.pl page
14. Select all rows (even the ones from the next page of the table) and
click on "Receive selected"
CHECH => In orderreceive.pl page there is a table with all selected rows
15. Ensure table has more than one page, as in step 7
16. Click on the "edit" link in the last row of the current page
CHECK => A modal window is displayed with 4 tabs within: Info,
Accounting, Receipt history and Items
CHECK => Modal has 4 buttons at the bottom, 'Previous' to go to previos
order, 'Cancel' to close the modal without keeping modifications, 'Save'
to close modal keeping modifications and 'Next' to go to the next order
CHECK => Even that we are at the end of the current page, 'Next' button
is still available
17. Click on 'Next' button
CHECK => The table behind the modal now displays the next page, and the modal was not closed
18. Click on 'Previous'
CHECK => The table behind the modal went back to the first page, and the modal was not closed
19. Click on 'Previous' button till you reach the first row of the first
page
CHECK => Only when you reach the first row of the first page 'Previous'
button gets disabled
20. Click on 'Next' button till you reach the last row of the last page
CHECK => Only when you reach the last button of the last page 'Next'
button gets disabled
21. Check that behaviour for the different types of order are still the
same
a. For orders that where created through suggestion, check that the
suggestion info is present in Info tab. If when suggestion was accepted
you set a reason, a dropdown to change the reason shoul display also.
b. For orders that where created through subscriptions, check that
the Items tab is disabled, and the Receipt history is enabled. On
accounting tab you should be able to change quantity ordered. If there
were less items received than ordered, the next time you receive this
order the child order generated from this one shoul appear in receipt
history.
c. For orders that don't come from subscription and creates there items on ordering, Receipt history
should be disabled, and a table with prefilled items shold appear in the
Items tab. You can edit them and the changes should appear in the item's
row.
d. For orders that don't come from subscription and creates there
items on receiving, Receipt history should be disabled, and a form to
create the items should appear in Items tab. When you add an item a
table should appear.
e. For orders that don't come from subscription and creates there
ites on cataloguing, Receipt history and Items tabs should be disabled.
f. Any changes made in quantity (received or ordered) or funds in the modal should be
reflected in the table if you click save from the modal.
22. Once you've done all you checking and verifications click save
23. While saving a progress bar should appear
24. If no error was detected, you should be redirected back to parcel.pl
page
25. If an error or warning was detected (like there is an order with 0
items to receive) the save button should be disabled and warnings
are dispayed.
26. prove t/db_dependent/Koha/Acquisition/Fund.t t/db_dependent/Koha/Acquisitoin/Order.t t/db_dependent/Koha/Item.t
Sponsored-by: Virginia Polytechnic Institute and State University
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes `filter_by_lates` use the `filter_by_active` method
instead of an ad-hoc query filter. It has the advantage that it
considers standing orders too.
No behavior change, tests should still pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patchset is adding the ability to create interfaces for vendors.
An interface is a website, software, or portal that you use to manage orders or
gather statistics from the vendor/organisation.
It will help librarians to keep track of those different information
within Koha.
* new DB table aqbookseller_interfaces(id, vendor_id, type, name, uri,
login, password, account_email, notes)
* new AV category VENDOR_INTERFACE_TYPE with 3 example values ADMIN,
ORDERS, REPORTS
* new pair of Koha classes Koha::Acquisition::Bookseller::Interface[s]
* new method to retrieve the interfaces from the vendor
Koha::Acquisition::Bookseller->interfaces
* Add/Delete interfaces when editing a vendor
* Display the interfaces on the vendor show view
Test plan:
- Add a new vendor
=> Notice the new "Interfaces" block
- Create some interfaces
=> They are display on the vendor show view
=> The password is hashed and can displayed on the demand
QA Note:
The "contacts" code is not very nice and I didn't want to replicate it,
so I went another way and tried to make the code reusable, for further
reutilisation.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Do not apply the patch yet
2. Make sure you have an ACQ biblio framework with some framework
plugins enabled. Create it if you don't.
3. Enable UseACQFrameworkForBiblioRecords system preference
4. Create a new acquisition basket.
5. On this new basket, click on "+ Add to basket", then "From a new
(empty) record"
6. You should see a simplified MARC editor based on ACQ framework.
Confirm that the plugins are not enabled (no visible buttons, nothing
happening on focus/blur)
7. Apply patch
8. Repeat step 5
9. You should now see the plugins' buttons (only if you enabled plugins
that use the 'click' event)
10. Confirm that the enabled plugins work correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patchset is adding the ability to create aliases for vendors. It
will then be easier to search for vendors.
* new DB table aqbookseller_aliases(id, vendor_id, alias)
* new pair of Koha classes Koha::Acquisition::Bookseller::Alias[es]
* new method to retrieve the aliases from the vendor
Koha::Acquisition::Bookseller->aliases
* The api spec changes to allow aliases to be embeded on
GET /acquisitions/vendors
* Add/Delete alias when editing a vendor
* Display the aliases on the vendor show view
* Search vendors by aliases
* Display the aliases in the dropdown list of the vendors in the ERM
module
Test plan:
- Create a vendor, add it some aliases
- Edit the vendor, remove some aliases
=> Behaviour must be consistent
- Search the vendor in the acquisition module by its aliases
=> The vendor must be returned in the result
- Go to the ERM module, add a new agreement or license
=> Notice that the dropdown list of the vendors is displaying the
aliases, that make vendors searchable by their aliases
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch uses the replace method added in last patch to ensure
records are overlayed when added to a basket
To test:
1 - Stage the sample file on this report using the options below
(If not using sample database simply save a record as marc from the details page, then change the title in the interface and import the saved version)
2 - Make sure to match using KohaBiblio (999c)
3 - Set option "Replace existing record" if match found
4 - Once record is staged go to Acquisitions
5 - Find a vendor and select/create an open basket
6 - Add to basket from the staged file
7 - Add order info and save
8 - Check the record, title is unchanged - Sample file should add 'New and improved!'
9 - Check the staged records batch - note the diff shows that new record should have overwritten
10 - Apply patch
11 - Stage file, match on KohaBiblio, set action if matching record found to 'Ignore incoming record'
12 - Add to basket from the staged file and save
13 - Confirm record not overlayed when not reuqested
14 - Stage file, match on KohaBiblio, set action if mathc record found to 'Replace existing...'
15 - Add to basket from staged file and save
16 - Confirm the record is updated to 'New and improved!'
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch:
- fixes some indentation
- flips unless-else to if-else for readability
- expands some comments for clarity
- removes unused biblioitemnum variable
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On 25655 we added a new patch to store the invoice unitprice and
currency even if it's the active currency. Here we then want to display
the column if at least one order has an invoice price in a currency that
is not the active one.
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On bug 25655 we are storing the unit price and currency used for
invoicing. Here we are displaying them on the invoice page.
Test plan:
Reuse the test plan from 25655 and go to the invoice page
Notice that a new 'Invoice price' column is displayed if at least one
order of the invoice had a price given in a foreign currency
We could discuss the display of the prices here, we've decided to not
format them.
We cannot do better for now as we are not storing the format along with
the currency.
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
And fix a bug they caught. We need to undef if a modification is made
and invoice_currency is removed.
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 24158 allows to calculate the actual cost on time of receive from a foreign currency.
This new enhancement is storing the price and the currency in database, into two new columns
invoice_unitprice an invoice_currency
Test plan:
Create a new order with several items to receive
Receive one or more items, and tick "change currency" on the order
receive page
Select a currency and finish the receiving
In DB notice that the price and the currency have been stored.
Receive remaining items and confirm that the form is prefilled with
previous price and currency
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Calling GetBudgetHierarchy from acqui/histsearch.pl
is slow if param skiptotals is not used.
To test:
1. Open browsers Console -> Network (F12).
2. Navigate to Order search page and perform search.
=> Take a note how long it takes to load the Search results page.
3. Apply this patch.
4. Repeat step 2.
=> Page should now load faster.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Thispatch adds the new method and alters addorderiso2907.pl to use this
rather than GetRecordImportMatches
To test:
1 - Import the attached record several times
2 - Set up a matching rule:
TitleAuthor threshold: 100
Matchpoint:
search index: title, score: 100, tag: 245$a
search index: author, score: 100, tag:100$a
3 - Edit one of the imported records to have a different author
4 - Stage the file again. and match using the matchpoint above
5 - Note that matches are found and listed on batch management, with the lowest scored match last
6 - Choose that match
7 - In acquisitions, add to a basket from the staged file
8 - Check the box for the record
9 - Note the match lists the biblionumber for the highest scoring match, not the chosen one
10 - Add an order and note it is for the wrong biblio
11 - Appy patch
12 - Restart_all
13 - Stage the file again and choose a lower scoring match
14 - Confirm when adding to basket this match is preserved
15 - Complete order and verify correct biblio ordered
16 - Stage again, select no match
17 - Confirm no match listed when adding to basket, and choose 'Do not look for matching records' while adding
18 - Confirm order is created on a new biblio
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Go to acqui/addorder.pl.
Create two items.
Check if results still match your expectations.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When the estimated delivery date was entered on adding or modifying
and order, it was not saved to the database.
To test:
* Add new order, fill in estimated delivery date
* Save
* Verify the estimated delivery date is empty
* Modify order line, date will also not be saved
* Apply patch
* The date should now save and update correctly
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On bug 14860 an 'else' was removed, assuming the price fields were set before discount,
this was incorrect. This patch renames the variable and always set the price, only discounting
ecost if a discount, but setting the values even if not
To test:
0 - Have a vendor with a discount of 0% specified (no discount)
1 - Export a record from your Koha
2 - Stage the record for import and match on biblionumber
3 - Add to a basket in acq from the staged file
4 - Select the title, and set order price to $10 and do not fill the discount field
5 - Add the order - note $0 order line
6 - Repeat with another vendor with a 10% discount and confirm that is correct
7 - Apply patch
8 - Repeat 2-4
9 - Add the order and confirm $10 price
10 - Repeat with discounted vendor, confirm prices are set discounted correctly
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This updates the call to store after populating the order
I put this on it's own bug just for sake of dependency, in case it is needed
seperate from 32166 for backports
To test:
1 - Apply and test with bug 32166
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When importing from a staged file we retrieve the records form the DB, skip any that are not selected,
and process the rest.
When we skip some, we still raise our record count, and use this to retrieve the inputs.
When building the page, we don't increment for skipped reocrds, so there can be a mismatch, i.e.
Record #1 on the page to add records may be the 3rd record in the import file
Rather than using a counting system, let us use the import record id directly
To test:
0 - Set system preferences:
MarcFieldsToOrder:
price: 949$g
quantity: 949$k
budget_code: 949$l
discount: 949$m
sort1: 949$n
sort2: 949$q
MarcItemFieldsToOrder:
homebranch: 949$a
holdingbranch: 949$b
itype: 949$y
nonpublic_note: 949$x
public_note: 949$z
loc: 949$c
ccode: 949$8
notforloan: 949$7
uri: 949$u
copyno: 949$t
price: 949$g
replacementprice: 949$v
itemcallnumber: 949$o
quantity: 949$k
budget_code: 949$l
1 - Stage attached sample file, Format:MARCXML, Record matching:Koha biblio 999$c
2 - Add to a basket from the staged file
3 - Select 1st record to basket and save
4 - Record is added with the fields above as expected
5 - Add to basket again, select 2nd record
6 - Record is added with price from 020a, ignoring incoming fields
7 - Repeat with 3rd, same problem
8 - Apply patch
9 - Stage file and repeat step 3
10 - Confirm added with correct values
11 - Add 2nd record and save, values correct
12 - Add 3rd record, values correct
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch deducts the current cost of an order if modifying it, so that
the current cost isn't counted when checking whether the updated cost
will take the order total amount above the allowed budget.
To test:
1. Add an active budget of $1,000
2. Attach a fund of $1,000. Set the fund to warn at 98% and $900.
3. Add an order to a basket, give it a vendor price of $500 with no
discount or tax and Save
4. Modify the order and change the vendor price to $450 and Save
5. Notice you get a warning that this order total amount will exceed the
allowed budget - this is incorrect.
6. Apply the patch and cancel the change so you're redirected back to
the basket
7. Modify the order and change the vendor price to $450 and Save
8. You should be able to Save without requiring confirmation
9. Add another order to the basket, give it a vendor price of $100 with
no discount or tax and Save. This should save normally, confirming we
can add new orders that do not exceed the allowed budget
10. Add another order to the basket, give it a vendor price of $500 with
no discount or tax and Save. This should trigger the warning that you
will exceed the allowed budget, as expected.
Sponsored-by: Waikato Institute of Technology
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Receive some orders via acquisitions
2 - View the invoice with these orders
3 - Click 'Modify fund' on the received orders list
4 - Confirm you can change the fund
5 - Set some authorised value categories for funds
6 - Reload the invoice
7 - Confirm the categories dropdowns change when different funds selected
8 - Confirm updating the statistic fields saves correctly
9 - Add an inactive budget with some funds
10 - Test the 'show inactive' button on shipment fund, adjustments, and modifying order fund
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a level to the budget_loops and displays the budgets
as optgroups for the funds
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=31559
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Current order receive code loops over each budget period and gets the hierarchy, this
is slow when systems have many budgets. Additionally, the list includes inactive items
by default
We can switch to a single call, and add consistency by adopting the same dropdown as used
when placing an order
To test:
1 - Add some budgets with funds - ensure you have at least one inactive budget and fund
2 - Place an order, observe the fund selection menu
3 - Close basket, receive order, observe the fund menu
4 - Apply patch
5 - Cancel receipt
6 - Receive again
7 - Observe fund menu, confirm it matches the order placing menu
8 - Confirm inactive are not displayed by default, but are when button is checked
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=31559
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds support for filtering invoice searches on additional
fields. To test:
1. Generate additional fields for invoices
2. Have invoices with additional fields
3. Use invoice searching and play with filtering by additional fields.
=> SUCCESS: It works!
4. Sign off :-D
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds support for additional fields for invoices. A new option
is added to the 'Additional fields' admin page, for the 'aqinvoices'
table.
Adding/editing invoices now supports this additional fields.
To test:
1. Apply this patches
2. Verify the original test plan works
=> SUCCESS: It does!
3. Sign off :-D
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
