This patch adds a new system preference 'OPACAcquisitionDetail'.
If it is enabled, information about items on order will be displayed on
the OPAC detail page.
Test plan:
- switch on the OPACAcquisitionDetails pref.
- set the AcqCreateItems pref to 'receiving'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the "Holdings" tab contains the
line "X item are on order." (at the bottom of the table containing the
item list).
- receive the items.
- verify the number of items has decreased.
- set the AcqCreateItems pref to 'ordering'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the item list contains the items
with the "on order" status.
- receive the items.
- verify the received items no longer have the the "on order" status.
To test completely this feature, you should verify there is no
regression on the pref OpacMaxItemsToDisplay, OpacSeparateHoldings and
OpacSeparateHoldingsBranch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also removed some blank lines from the original patch and bumped up
the DBRev.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Changed the syspref.sql file to remove one of the doubled
up UNIMARCAuthrityField100 that slipped in with an earlier
patch on this bug.
Passes all tests and QA script, also t/db_dependent/Circulation_issue.t
Tested with items that had
- no notforloan value set
- notforloan value not used in updateNotforLoanStatusOnCheckin
- the notforloan value defined in UpdateNotForLoanStatusOnCheckin
Also verified it works the same, when the item was checked out or
not checked out on return.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to streamline the cataloging process my
automatically updating notforloan values on checkin. For example, an
item is set to notforloan of -1 ( ordered ). The item, is received,
processed, and checked in for the first time before being shelved.
The checkin automatically changes the nfl value from -1 to 0. The
same workflow could be used for damaged items as well.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set the new system preference UpdateNotForLoanStatusOnCheckin
to the following:
-1: 0
0: 1
4) Create an item, set its notforloan value to -1
5) Check in the item, note its not for loan value is now 0
6) Check in the item again, note its not for loan value is now 1
7) Check in the item again, note its not for loan value reamins 1
Signed-off-by: Havilah Lyon <havilah@aflibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, in opac-detail.pl, there exists a column named 'Location'.
This column lists the name of the holding branch, and the item's
location description. This can cause confusion to borrowers, as
they may assume that the holding branch is the *owning* branch
(homebranch) of an item.
This could cause a situation where a borrower waits for an
item to be returned to his or her library, only to find that
the library never owned that item, and it was transferred back
to its homebranch. It could also lead a borrower to falsely
assume that his or her home library does not own a copy of a
particular item because the borrower does not see an his or her
home library listed for any of the items on the record.
In addition, even when the holding branch is different
than the home branch, the item's shelving location is displayed,
even though that branch may not use that location.
This commit makes the item details table equivalent to the intranet
details page by adding a "Home Library" column, which displays the
item's home library, as well as the shelving location.
If singleBranchMode is enabled, this column disappears and the
"Location" column displays the shelving location only.
This commit adds two new system preferences:
OpacLocationBranchToDisplay, which defines whether
to display the holding library, the home library,
or both for the opac details page.
OpacLocationBranchToDisplayShelving, which defines
where the shelving location should be displayed,
under the home library, the holding library, or both.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. Tested all variations.
No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There is currently no way to set the privacy setting for newly created
patrons. This patch adds a new field "default privacy" to the patron
categories such that each patron category may have a different default
privacy setting.
Test Plan:
1) Apply this patch
2) Edit a patron category, change the default privacy to "forever"
3) Create a new patron of that category
4) Log into the catalog as that patron, verify the privacy setting
is set to "forever"
5) Repeat steps 2-4 with the settings "never" and "default"
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254 [QA Followup 1] - can't set patron privacy by default
* Adds default privacy column to summary table
* Adds default privacy to delete category summary
* Adds "AFTER categorycode" to the database update
* Whitespace cleanup and formatting for affected code blocks
* Switch basic DBI queries to DBIx::Class to simplify code
* Adds reference to misc/cronjobs/batch_anonymise.pl to description
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254 [QA Followup 2] - can't set patron privacy by default
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254: QA FIX: remove trailing whitespaces
This patch removes trailing whitespaces/tab and fix the fields order in
the updatedb entry (according to the kohastructure.pl).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The value of the pref should be '1' (for yes) or '0' (for no).
The options could be kept as 'yes' and 'no': since the ImplicitTyping is
set, yes/no would become '1/0'. But I think it is preferable not to use
the yes/no value in order not to introduce a bug here if ImplicitTyping
is unset later.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, the Koha system preference OPACItemHolds allows a library
system to choose to allow patrons to place bib and item level holds from
the OPAC, or to allow patrons only to place bib level holds only from
the OPAC.
This patch set adds a third option, "force", which *requires* that
patrons place item level holds from the opac, with no option of making a
bib level hold.
This patch modifies the system preference OPACItemHolds to be of the
type "Choice", with the choices being "no", "yes", "force". The patch
does not alter the currently set value of OPACItemHolds for database
updates, only adding the additional option.
Test Plan:
1) Set OPACItemHolds to "no". Check that OPAC holds behave as it is now
(no "Place On" column, no "Select a specific copy" table, making a
reserve is successful)
2) Set OPACItemHolds to "yes". Check that OPAC holds behave as it is now
( "Place On" column is there, "Select a specific copy" table shows when
"A specific copy" is selected, making a reserve is successful)
3) Set OPACItemHolds to "force". Check that OPAC holds behave as follows:
- no "Place On" column is present
- "Select a specific copy" table is opened
- making a reserve is successful
This patch is a squashed patch of the 3 following patches:
Amended opac-reserve.tt accordingly
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Bug 7825: Followup prevent submission without choosing an item
+ Fix some ergonomic issues in opac-reserve
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Bug 7825: Updatedatabase should only change the type and options values.
The value field should not be changed. We have to keep '1' for 'yes' and ''
for 'no'.
Original patch is from Srdjan Jankovic.
Signed-off-by: Koha team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on 4th patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) View some records with authorities
4) Note your previously set authority separator should still be in use
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes the redirection to step 3.
If you go on installer/install.pl and Koha is already installed,
you should be redirected to the step 3. Without this patch, the
script raised an internal error (500).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
InstallAuth was in the installer directory, which meant that Plack was
unable to find it, and so running the webinstaller would fail. This
moves it into C4,
Test plan:
* Make sure the web installer runs under plack
* Make sure the web installer runs under non-plack
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Accidentally the ISSUESLIP got copied to the RESERVESLIP.
This adds the correct text and formatting to the RESERVESLIP.
To test:
- Run the German web installer on an empty database
- Check that the ISSUESLIP and RESERVESLIP notices are different
and display correctly
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using webinstaller, all optionals, all ok.
ISSUESLIP(Ausleihquittung) longer than RESERVESLIP(Vormerkung)
No errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This updates the German default frameworks for bibliographic records
and authorities using the files created from the po files on Pootle.
To test:
- Run the web installer, make sure all mandatory data is selected
- Verify there are no SQL errors
- Check cataloguing behaves normally
- Check adding authorities behaves normally
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using webinstaller.
No errors
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This updates the German simple and fast add frameworks
using the files created from the po files on Pootle.
To test:
- Run the web installer, make sure all mandatory data is selected
- Verify there are no SQL errors
- Check cataloguing behaves normally
- Check adding authorities behaves normally
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using webinstaller
Checked
No errors
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changes:
- Translates new notices SHARE_ACCEPT und SHARE_INVITE
- Copies subtag_registry.sql from en as after applying patch
from bug 12275 - so 'Laotisch' will show up correctly
- Rephrases and corrects spelling for user permissions
- Translates new authorized value SIP_MEDIA_TYPE
- Improves translations of creator sample data
- Improves translations of sample patron categories
- translations in po files were changed accordingly
To test:
- Run the web installer, install all mandatory and optional
sample data
- Check everything is installed without errors
- Verify changes listed above in the interface
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Installer works ok, values ok
No errors
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Corrects the German translation for 'Laotisch'
- Adds an icon to the reference item type
- Corrects capitalization for user permissions
To test:
- Run English web installer, make sure to select
the sample item types and all mandatory data
- Check user permissions appear correctly
- Check icon for REF itemtype is shown correctly
- Check that languages in Advanced Search appear
as normal
- Install German and check in language list on
advanced search 'Laotisch' now appears
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well following test plan.
No errors
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
- Apply this patch.
- Reset your DB (DROP DATABASE, CREATE DATABASE -- whatever method you
prefer)
- Install it-IT templates on command line
- Run the webinstaller using it-IT
- Follow the steps and choose all under 'necessari'
=> SUCCESS: no errors
=> Extra: see the italian installation and control the translation
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested doing it-IT install, all files selected, all load ok.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Ran the Italian web installer, no errors.
Checked some of the changed data, like the translated notices,
in the interface. No problems found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
- Apply this patch.
- Reset your DB (DROP DATABASE, CREATE DATABASE -- whatever method you
prefer)
- Install it-IT templates on command line
- Run the webinstaller using it-IT
- Follow the steps and choose all under 'opzionali'
=> SUCCESS: no errors
=> Sign this
=> Extra: see the cataloguing frameworks and check if you like the
translation
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All files load ok, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Web installer loads all files without errors.
Verified 3 bibliographic frameworks and 5 authority types
appear to be translated correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On bug 10845 some lines from sample_notices.sql were ommited when
adding the trailing parameter. This produces some errors when
installing using 'es-ES' sample data; and, in some conditions I
couldn't reproduce right now, occasional C4/NewsChannel.pm errors
due to mandatory message transport data incompletely loaded.
To reproduce:
- Make sure your setup has the es-ES translations installed and
up-to-date (translation should raise lots of warnings)
- With a cleaned (DROP DATABASE ... ; CREATE DATABASE ...;) run the
webinstaller
- Choose es-ES for the webinstaller.
- Follow the steps and choose all the sample data.
=> Errors related to sample_notices.sql and
sample_notices_message_transports.sql show.
To fix:
- Apply this patch.
- Reset your DB (DROP DATABASE, CREATE DATABASE -- whatever method you prefer)
- Run the webinstaller using es-ES
- Follow the steps and choose all sample data.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Dunno why, but the currency symbol for NOK was given as "$", when
it should be "kr".
To test:
- Empty the "currency" table in the DB:
DELETE FROM currency;
- Load in the file changed by this patch:
sudo koha-mysql <instance> < installer/data/mysql/nb-NO/2-Valgfritt/parameters.sql
(if you are testing on a (gitified) package install)
- Check that "kr" is displayed on /cgi-bin/koha/admin/currency.pl
- Add a budget and a fund, and check that "kr" is displayed in the list
of funds (currency symbols seem to be missing from the list of budgets)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
file loads ok, kr currency active, no errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The line for inserting AggressiveMatchOnISBN didn't have the right
number of columns.
Test Plan:
1) Attempt to run the web installer OR try to import the sysprefs.sql
into your db
2) Apply this patch
3) Try again, no errors should be reported this time
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Catalog a record with the ISBN "0394502884 (Random House)"
2) Export the record, edit it so the ISBN is now
"0394502884 (UnRandomHouse)"
3) Using the record import tool, import this record with matching
on ISBN.
4) You should not find a match
5) Apply this patch
6) Run updatedatabase.pl
7) Enable the new system preference AggressiveMatchOnISBN
8) Repeat step 3
9) The tool should now find a match
Signed-off-by: Tom McMurdo <thomas.mcmurdo@state.vp.us>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes a trailing space and remove the issn index deletion
(it does not exist on deletedbiblioitems).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply this patch
2) Create a record with 5 ISBNs and 5 ISSNs
3) Create a new report from the following SQL, or execute it from the
mysql console:
SELECT isbn, issn FROM biblioitems ORDER BY biblionumber DESC LIMIT 1
4) Note that all your ISBNs and ISSNs are listed, separated by the pipe
character ( | )
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This might be slow to run on big databases, because of the 2 index
rebuilds, however it changes no functionality just increases the field
size which is safe enough (we store multiple now already)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Records hidden with OpacSuppression are filtered from the search
results, but the opac-detail page is still visible if you know the
biblio number. This patch hides the detail page for suppressed biblios
by redirecting (controlled by the syspref OpacSuppressionRedirect)
either to opac-blocked (default), explaining that the record is blocked
(including optional explanatory text from the syspref
OpacSuppressionMessage) or to Koha's 404 page, giving no hint that a
biblio with that number exists in the system.
Test plan:
Make sure you have at least one record with 942$n == 1.
Set OpacSuppression to "Don't hide".
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is found.
Open the detail page for the record.
Observe that it is accessible. Copy the URL for later(!).
Set OpacSuppression to "Hide".
Leave OpacSuppressionByIPRange blank.
Set OpacSuppressionRedirect to "an explanatory page ('This record is
blocked')."
Leave OpacSuppressionMessage blank for now.
Disable queryparser(!) (because of bug 10542).
Do a full zebra reindex.
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is not found.
Open the opac-detail URL of the record (the one you copied before).
Observe that you are redirected to opac-blocked and it displays a
short standard message.
Edit OpacSuppressionMessage and input some text.
Open the opac-detail URL of the record again (the one you copied
before).
Observe that the text you entered in OpacSuppressionMessage is
displayed under the standard text you have seen before.
Set OpacSuppressionRedirect to "the 404 error page ('Not found')."
Open the opac-detail URL of the record again (the one you copied before).
Observe that you are redirected to Koha's 404 error page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
1/ Install Koha 3.12
2/ Create some subscriptions. Ensure you have at least two
subscriptions with the same numbering pattern, with one of the
keys everyX/addX/whenmorethanX/settoX set to NULL
3/ Remember this numbering pattern.
4/ Upgrade to 3.14
5/ Run updatedatabase.pl
6/ The numbering pattern is duplicated
Now repeat steps 1 to 4, then apply the patch and run
updatedatabase.pl. Numbering pattern should not be duplicated.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This followup fixes a couple of issues:
- disable the feature by default.
- use the datatables include file.
- fix the syspref description.
- replace "History search" with "Search history".
- replace biblio with catalog
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like OPAC, the search history is now available for intranet. This
is controlled by the EnableSearchHistory system preference.
Test plan:
1/ Switch on the 'EnableSearchHistory' syspref.
3/ Launch some biblio and authority searches.
4/ Go on your search history page (top right, under "Set library").
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
