This fixes a regression introduced by the patch for bug
9394 -- when printing a hold slip using the 'print and confirm'
button, the slip would contain only the text 'reserve not found',
not a full hold slip.
This patch also adds a regression test.
To test:
[1] Check in an item that would fill a hold. Use the 'print
and confirm button' to confirm the hold.
[2] The printout will only contain text to the effect of
'reserve not found'.
[3] Apply the patch.
[4] Repeat step 1. This time, a full hold slip should be printed.
[5] Verify that prove -v t/db_dependent/Reserves.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Pass all tests, new and old, and QA script.
Verified wrong and corrected behaviour.
Note: Sometimes there will not be the message 'reserve not found'
showing up, but hold information for a different record. This happens
when there exists a reserve_id with the borrowernumber of the patron
in question in your database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Description:
A new pref ConfirmFutureHolds is added. When confirming a hold at checkin time,
the number of days in this pref is taken into account when looking for reserves.
Note that this pref does not interfere with renewing, issuing or transferring
a book. For report Holds to pull, the default end date is calculated with this
new preference.
The use of ConfirmFutureHolds is useful only when future holds are allowed.
Test plan:
1) Enable future holds. Add a number of days into ConfirmFutureHolds.
2) Place a future hold within this number of days.
3) Run holds to pull report. Check default startdate and enddate.
4) Check this book in. Can you confirm the hold? Do not confirm.
5) Issue the book to another patron. You should not see a warning.
6) Renew the book for this patron via opac or staff. No warning either.
7) Check in again. Warning pops up again.
8) Transfer book. Switch branch. Check in. Hold found pops up. Do not confirm.
9) Back to first branch. Check in (with popup). Remove the hold. Add new future
hold past the number of days. Check in (no warn).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
CheckReserves was using the CircControl system preference to determine what
patrons an item can fill a hold for. It should be using ReservesControlBranch
instead.
Test Plan:
1) Set ReservesControlBranch to "item's home library".
2) Create an item at Library A, place holds for it for patrons at
Library B, Library C, and Library A in that order,
for pickup at the patrons home library.
3) Make sure the holds policy for Library A is set to
Hold Policy = "From home library" and
Return Policy = "Item returns home".
Make sure the holds policies for the other libraries are set to
Hold Policy = "From any library".
4) Check the item in at Library C, the hold for the patron at Library B
should pop up, even though it's in violation of the circulation rules.
Don't click the confirm button!
5) Apply this patch, and reload the page,
now the hold listed should be for the last hold,
the hold for the patron at Library A, which is correct.
This patch adds the subroutine C4::Reserves::GetReservesControlBranch as
an equivilent to C4::Circulation::_GetCircControlBranch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed POD so that arguments and explanation match (C<$item>).
Also tested opac-reserves.pl for regressions.
Passes all tests, QA script, and Reserves.t.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable the syspref emailLibrarianWhenHoldIsPlaced
2) Modify the HOLDPLACED notice, add some item level fields
3) Place an item level hold
4) Check the email you receive ( or just look at it from the db )
You should see the item level fields are new populated
5) Place a title level hold
6) Check the email you receive - item fields are not populated,
but notice still looks ok.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If IndependentBranches is ON, patrons are not allowed to place
hold requests on items whose owning library is different from
the patron's home library, *unless* the canreservefromotherbranches
system preference is also ON.
The patch implements the intended behavior; without it, IndependentBranches
and canreservefromotherbranches were not consulted during the
item holdability check.
To test:
[1] Have IndependentBranches ON and canreservefromotherbranches
OFF. Make sure that the circulation rules are set up to
permit patrons to place hold requests in general.
[2] In the OPAC, log in as a patron from library A, and try placing
a hold on an item from library B. The patron will be able to
place the request.
[3] Cancel the request.
[4] Apply the patch.
[5] Try placing the same hold request. This time, the request should
be forbidden.
[6] Turn on canreservefromotherbranches.
[7] Try placing the hold request. This time, it should go through.
[8] Cancel the request.
[9] Turn off IndependentBranches.
[10] Try placing the hold request and verify that it is permitted.
[10]
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- fix identation in one line
- remove a commented-out warn
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A change-and-replace went a tick too far. This patch
adjusts the column alias in the query run in MergeHolds()
to reflect that the value being returned is the number of
hold requests, not an ID.
To test:
[1] This patch should have no visible changes to behavior. To
verify, pick to bib records that have hold requests on them,
then merge them together. Verify that the merged bib
contains sll of the hold requests on it.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* C4::Reserves::_FixPriority
- The previous code checked the cancellationdate. If think you never pass
in it with bad parameters, but in order to be sure I added the check on
this value.
- The reservedates array was never used.
* circ/circulation.tt
There was a bug: it was not possible to remove an hold from the
circulation page. Passing reserve_id fixes the issue.
* C4::Reserves::GetReserveId
This subroutine did not have a unit test.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch switches from using a combination of
biblionumber/borrowernumber to using reserve_id where possible.
Test Plan:
1) Apply patch
2) Run t/db_dependent/Holds.t
Signed-off-by: Maxime Pelletier <maxime.pelletier@libeo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Script overdue_notices.pl creates a printed letter if borrower as no email.
Actually, unless --email option is used, first valid email of borrower is used. Email field should depend on AutoEmailPrimaryAddress syspref like in other letter creations.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Following test plan from Julien Sicot from Bugzilla:
- with patron's email address specified on "primary email"
field AND syspref "AutoEmailPrimaryAddress" on "home"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
field AND syspref "AutoEmailPrimaryAddress" on "work"
=> notice sent to patron | OK
- with patron's email address specified on "alternate email"
field AND syspref "AutoEmailPrimaryAddress" on "alternate"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
OR "alternate email" field AND syspref "AutoEmailPrimaryAddress" on "home"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email" OR
- with patron's email address specified on "primary email" field
AND syspref "AutoEmailPrimaryAddress" on "home"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email" field
AND syspref "AutoEmailPrimaryAddress" on "work"
=> notice sent to patron | OK
- with patron's email address specified on "alternate email" field
AND syspref "AutoEmailPrimaryAddress" on "alternate"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
OR "alternate email" field AND syspref "AutoEmailPrimaryAddress"
on "home"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email"
OR "secondary email" field AND syspref "AutoEmailPrimaryAddress"
on "alternate"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email"
OR "secondary email" OR "alternate email" field and syspref
"AutoEmailPrimaryAddress" on "first valid" => notice sent to patron | OK"secondary email" field AND syspref "AutoEmailPrimaryAddress" on "alternate" => no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email" OR
"secondary email" OR "alternate email" field and syspref
"AutoEmailPrimaryAddress" on "first valid" => notice sent to patron | OK
Note: Options for AutoEmailPrimaryAddress should be like the field names on
the patron form (primary, secondary...), but this is outside the scope of this
patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Keeping fetchrow close to its execute worked even better in GetReserveStatus.
Instead of returning undef, I return empty string.
I checked all calls; this value is mostly not checked for undef.
So we eliminate a lot of warnings in log.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch rewrites the GetReserveStatus routine in order to take in
parameter the itemnumber and/or the biblionumber.
In some places, the C4::Reserves::CheckReserves routine is called when
we just want to get the status of the reserve. In these cases, the
C4::Reserves::GetReserveStatus is now called.
This routine executes 1 sql query (or 2 max).
Test plan:
Check that there is no regression on the different pages where reserves
are used. The different status will be the same than before applying
this patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a librarian checks out a waiting hold to a different patron
it gives the item conflicting statuses. The item will show as both
checked out to the different patron, and waiting for the original
patron.
This patch fixes this by not allowing this situation to occurr. If
a librarian attempts to issue an item that is waiting for a different
patron, the system will force the librarian to choose to
a) not issue the item
b) issue the item, and cancel the waiting hold
c) issue the item, and revert the waiting hold
In this scenario, reverting the waiting hold means to push it back
on the reserves queue as a hold with a priority of 1, which will push
the priorities of any existing holds back by 1 as well. It will become
an item level hold for the given item, as we cannot know if the hold
was item-level or bib-level given the data we have about the hold.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
All three cases tested, correct outcome each time
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The slip RESERVESLIP is not replacing fields correctly.
C4::Reserves::ReserveSlip calls C4::Letters::GetPreparedLetter,
and passes the $reserve hashref to it for each table except branches
( which is passed the branchcode ). The problem is, if you pass a
hashref for a table, it uses that hashref for the replacing, rather
than looking up the data from the database.
Fixed by passing the correct keys for each of the tables requested.
Signed-off-by: Marc Veron <veron@veron.ch>
Tested following the test plan.
Could reproduce the bug.
After applying the patch slip printed as expected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
There is a flaw in C4::Members::Messaging::GetMessagingPreferences where
the system assumes that every transport will use the same letter. This
is not necessarily true. Even with the default preferences of just
'email' and 'sms', we should be able to have different letters
for each, as one has a maximum character length ( sms ) and one
does not. GetMessagingPreferences currently uses the letter code
of the last result of its query as the letter code for every transport type.
The returned data is a hashref with a key 'transport_types' that is
an array of transport_types this borrower has selected for the given
alert.
This commit modifies GetMessagingPreferences such that the the
'transport_types' array is now a hash where the name of the transport
type is now a key to the value of the letter code set for that transport
type.
It also modifies code calling GetMessagingPreferences where necessary,
and as a side benefit will correctly get the letter codes for email
and sms correctly, if they are defined differently.
http://bugs.koha-community.org/show_bug.cgi?id=4246
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
In use in production by two libraries: Middletown and Washoe
who give their sign off but don't have git to do so.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
For request.pl, there are two ways to suspend a reserve, either
by using the 'suspend' button for an individual reserve, or by
using the 'Update hold(s)' button with suspend until dates set.
If the 'suspend' button is used, any date in the 'suspend until'
field is ignored. This commit fixes this issue.
* Add suspend_until date to suspend button link via jquery
* Add optional date to ToggleSuspend()
* Add KohaDates plugin where necessary
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
passes tests, tested:
* suspend all holds from circ.pl
* suspend one hold from circ.pl
* suspend all holds from moremember.pl
* suspend one hold from moremember.pl
--- NOTE: clicking suspend all holds without setting a date will mean the holds must be manually unsuspended. I'm not sure this is intentional?
* suspend a specific hold using the in-table button on reserves
* suspend a specific hold using the "update hold" button
500 error is gone.
http://bugs.koha-community.org/show_bug.cgi?id=8084
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
New function was actually returning an arrayref, so made
perldoc and function usage consistent.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds a new subroutine in C4::Items, GetItemnumbersForBiblio, which takes a
single biblionumber, and returns an array of all the corresponding itemnumbers.
This patch also replaces the usage of get_itemnumbers_of in C4::Reserves::CanBookBeReserved
with this new subroutine, as the output is more consistent with what we were
lookng for (this is what fixes the bug issue).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds the ability to suspend reserves. The new system preference
AutoResumeSuspendedHolds enables the ability to set a date for
a suspended hold to automatically be resumed.
When a hold is suspended, it will continue to increase in priority
as the holds above it are fulfilled. If the first holds in line
to be filled are suspended, the first non-suspened hold in line
will be used when an item can fulfill a hold that has been placed.
http://bugs.koha-community.org/show_bug.cgi?id=7641
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested with the preference on and off:
1. placed several holds in the staff client
2. suspended some with a date
3. suspended some without a date
4. triggered hold message by checking in for hold with suspensions
5. the suspended hold was skipped as it should be
6. tested suspending holds in the OPAC w and w/out dates
7. ran the cron to clear suspensions with dates
All the above tests worked as expected. Signing off.
Optionally delete bibliographic record when batch deleting items, if no items remain on the record.
Adds deleting of reserves to DelBiblio. Since subscriptions are deleted automatically,
it made sense for deletion of reserves to maintain the same behavior.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
I like the way this works, and it does. Passes tests.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
At the moment, a reserve will be canceled if it has passed its
expiration date, even if the item is waiting or in the process
of being transferred. The situation could arise where someone
has a hold filled, but it is canceled while in transit, or before
the borrower can pick it up.
If the new syspref ExpireReservesMaxPickUpDelay is enabled,
this will cancel holds that have been waiting for longer than the
number of days specified in the syspref ReservesMaxPickupDelay.
If ExpireReservesMaxPickUpDelayCharge is set, the borrower charged the fee set therein.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
Altered circulation.pref to include currency class and [% local_currency %] param
Branches can have their own version of notices - added branchcode to
letter table.
Support html notices - added is_html to letter table.
Support for borrower attributes in templates.
GetPreparedletter() is the interface for compiling letters (notices).
Sysprefs for notice and slips stylesheets
Added TRANSFERSLIP to the letters
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
To test:
Create 4 holds on a bib, for patrons A, B, C, and D,
Check in the item to mark hold as waiting for patron A
Check out the item to patron B -> reserve for patron B should be removed
Check in the item to mark hold as waiting for patron A
Check out the item to Patron A, hold should complete normally
Check in the item to mark hold as waiting for patron C
Check out the item to patron D -> reserve for patron D should be removed.
Check in the item to mark hold as waiting for patron C
Check out the item to patron C, hold should complete normally
Check in the item -> there should be no more reserves.
We also tested:
Created 4 holds on a bib with two items, for patrons A, B, C, and D
All worked as expected.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Replaces call to GetMemberDetails with a call to GetMember. Much more efficient,
and since only branchcode is used, no required data is lost.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
CanBookBeReserved uses the very heavy-weight function GetItemsInfo to simply retrieve
the itemnumbers attached to a given biblio. The function get_itemnumbers_of() is much
lighter-weight and returns the required information; switching to it will reduce the overall
system resource cost of placing a hold.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
C4::Search is not used, so removing it from C4::Reserves
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Display links to parent biblios, show linked items in holdings, allow holds on
linked items. This uses MARC to maintain relationships.
Sponsored by the Mississippi Department of Archives and History and RapidRadio
Solution. Originally developed by Savitra Sirohi and Amit Gupta at OSSLabs, with
UNIMARC support added by Zeno Tajoli. Commits squashed and merge conflicts
resolved by Chris Cormack from Catalyst. Respect for NORMARC and some small
framework portability fixes made by Jared Camins-Esakov of C & P Bibliography
Services.
IMPORTANT NOTE: A bug in the 773 coding for MARC21 was corrected from the
original OSS Labs code. The 773s generated by the pre-release code did not have
the first indicator set to '0', which means that they were not supposed to
display. Going forward, the first indicator will be set correctly, but existing
records created with this code will no longer appear (they appeared before only
due to another bug). To correct this, you could globally (or, to make sure you
only modify records created with the Analytics tool, for records with 773$0)
change the first indicator of the 773 from blank to '0'.
== Background ==
An analytic record for an item is a more detailed, monographic biblio for an
item attached to a serial record . This is often used for special issues of a
journal that are released as books on their own (assigned an ISBN, as well as an
ISSN/volume/issue). It is important for researchers to be able to search for
these items both as issues of the serial, and as monographs. It is equally
important for the library to not have duplicate item records for the item in
question to have to keep synchronized.
== Establishing relationships ==
Analytical records are connected to items belonging to parent or host
bibliographic records. This can be accomplished by:
* From an analytical bibliographic record linking to an host item by providing
the item barcode as input
* From a host item by using option "analyze", this creates a new empty
bibliographic record with field 773 (MARC21) populated
* Running a new CLI script that establishes a relationship between the
analytical record and the host item identified by the barcode in the
analytical record's 773$o (MARC21)
== Connecting Records ==
The relationships are maintained in the MARC records, we have not used database
tables at all.
== MARC Representation ==
In MARC21/NORMARC we have used:
* 773$9 to store the Koha item number of the host item
* 773$0 to store the Koha biblio number of the host bibliographic record
The above fields are used to display the relationships in various screens in the
OPAC and the staff interface. Additionally, when populating field 773 with host
item's details, we have used following MARC 21 mapping:
* 'a' <= 100/110/111 $a (author main)
* 'b' <= 250$a (edition)
* 'd' <= 260$a, 260$b, 260$c (place, publisher, year)
* 'o' <= barcode
* 't' <= 245$a (title)
* 'w' <= (003)001 --> if no 001 is available, we can populate biblionumber
* 'x' <= 022$a (issn)
* 'z' <= 020$a (isbn)
In UNIMARC, this code uses:
* 461$9 to store the Koha item number of the host item
* 461$0 to store the Koha biblio number of the host bibliographic record
When populating field 461 in UNIMARC, the following mapping is used:
* 't' <= 200$a (title)
== Treatment of Holds ==
A key requirement was to allow holds to be placed on host items from the
analytical record. We have accomplished this by allowing holds on specific
copies only. Biblio level holds are not allowed. This ensures that holds are
placed on specific items that are relevant to the analytical record.
== Deleting host items with linked analytical records ==
As we have not used database tables to maintain relationships, we had to use
search to find out if any linked analytical records are present. If 1 or more
analytical are present, we do not allow deletion of items. This is similar to
what we see when we try to delete authority records.
== Importing analytical records ==
Analytical records can be imported using bulkmarcimport or the GUI tools. The
new CLI script can be executed after the import to establish relationships with
host items. The script will establish relationships using the host item's
barcode, the barcode must be present in 773$o of the analytical record.
== What if there are two or more copies of the host item? ==
The current design will require that there be two host (773) fields, one for
each copy.
== What if there is no barcode available for the host item? ==
It is still possible to establish a relationship, by populating 773$9 with the
host's item number. However the CLI script uses barcode in 773$o to establish
relationships so it won't work where barcodes are unavailable. Also from an
analytical record, it is possible to establish a relationship to a host item by
providing the barcode as input, this option will not be available as well.
Commits that added the following features were squashed by Chris Cormack (this
is not a list of every commit):
* Display links to host records from biblio detail screens
* Support for UNIMARC, respecting the system preference 'marcflavor'
* Support holds from the OPAC
* Ability to link to items belong to host records from a analytical record
* Display items belonging to host records in the moredetail page
* Ability to edit items belonging to host records, also ability to delink from
them
* Move get host items code into a C4 routine, also calling the new routine in
related perl scripts
* Move host field population to a C4 routine, all changes in pl files to call
new routine
* Allow only specific copy holds for analytical records plus changes to use new
C4 routines
* Support for holds on items linked via host records
* Storing bibnumber and itemnumber in subfields 0 and 9, plus other mapping
changes
* New command line script that establishes relationships between analytical
records and host items and bibs. The script looks for host field (MARC21 773)
in records, and based on barcode in subfield 'o' populates host bibnumber in
subfield '0' and host itemnumber in subfield '9'. The script can be run after
an import of analytical records, it can also be run in the crontab to maintain
the relationships
* Ability to create analytical records from items, to view linked analytics, and
prevent deletion of items that have linked analytics
* New template for catalogue/detail.pl (NOTE: not a new template file, just a
new way of displaying analytics), template displays linked analytics and
allows creation of analytical records
* New zebra index for item number in host fields. This index will be used to
display links to analytical records from host records
* Display title of host record instead of the phrase host record
* Using detail.tmpl for analytics tab instead of a new template file
* Improved qualification info prepration in Prephostmarcfield
* Check for linked analytics before deleting item
* Display link to host record and more meaningful anchor text for edit item link
* Analytical record: Unimarc index in record.abs and help in
create_analytical_rel.pl
* Adding a sys pref that controls display of options to create analytical
relationships
* Add host entry in XSLT stylesheet in staff item detail
* Added host record support to OPAC detail XSLT
* Adding 773$0 and 773$9 to all frameworks
* Adding 773 subfields 0 and 9 to default marc framework via updatedatabase.pl
* Display create analytics and used in links in catalog detail
* Fixed problem where analytical records not showing in OPAC search results
because GetMarcBiblio now needs a flag to add item records
* Fixed problem where analytics count was set to 1 for all records, not just
those with analytics
* Fixed catalogue detail page not to show analytics counts if count is 0
Conflicts:
installer/data/mysql/updatedatabase.pl
koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/addbiblio.tt
kohaversion.pl
Co-author: Savitra Sirohi <savitra.sirohi@osslabs.biz>
Co-author: Zeno Tajoli <tajoli@cilea.it>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Holds are now shifted and reordered by date placed.
Holds already marked waiting, or in transit are not reordered.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
With item level itypes activated only the item for which holds were
allowed in circulation rules triggered the hold notice on checkin.
Also checked that biblio level itype still trigered correctly.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The subroutine for sending HOLD and HOLD_PRINT notices only checked the
"email" field of the borrowers table and didn't check the value of the
AutoEmailPrimaryAddress preference. With this patch, "Hold filled"
notices can now be sent using the other email addresses of the member.
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=5867
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
When the message name was updated from "Hold Filled" to "Hold_Filled" for T::T compatibility,
the line in _koha_notify_reserve that looked up the letter code by the message name no longer
matched, so none of the messages were sent. This patch just replaces the space with an underscore
to get the names aligned properly.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
In Liz's second comment on this bug, she points out that local-only
holds (and also no-holds) items are being used to fill the first hold
in the queue, no matter where located, transitting if necessary. If
all the items on a biblio are set to no-holds types, this problem
would never arise, as no holds could be *placed*. But if you have
one or more unlimitedor local-hold items, then holds are getting
filled by the first item to cross a scanner, no matter what.
This patch will check during C4::Reserves::CheckReserves to make sure
that the hold being handed back to AddReturn is actually fillable by
the item just scanned. One caveat: If CircControl is set to "the library
you are logged in at", this will cause items checked in at
other-than-their-home-library to fill local holds at the library where
scanned. This is, however, an edge case!
Signed-off-by: Liz Rea <lrea@nekls.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch improves the phrasing of several messages by
breaking the message variable into distinct parts for more
natural-sounding warnings when:
- Checking out an item on hold for another patron
- Checking out an item which is waiting for another patron
- Checking out an item which is checked out to another patron
- Checking out an item which is checked out to this patron
- Checking out to a patron who has too many checked out
I would appreciate special attention to my changes to the
TooMany function in Circulation.pm to make sure I handled
it correctly.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The function was too complex for so simple stuff, not we check if one of all items of the record can be issued.
[Note by Galen Charlton: not only does this patch simplify the routine,
it also makes it behave correctly.]
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch defines a new values of reserves.found, 'T', to indicate that
an item has been allocated to fill a hold request and is currently
in transit from one branch to another. This explicit value is meant
to filter out hold requests from processing by holds queue batch
job.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
