When logging out from OPAC, plack-error.log log and/or opac-error.log
complain about 'uninitialized value $user' in C4/Auth.pm line 187. The
warning is not necessary, this patch removes it.
To test:
- try to trigger warning
- apply patch
- verify that warning no longer occurs
- prove t/db_dependent/Auth.t
- verifiy that SCO still behaves like before (especially if
you break out from sco path)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Updating to use they/them and skipping the ones changed to it
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Comments throughout the Koha codebase assume that
all librarians or borrowers are male by using the
pronoun 'he' universally. This patch changes to
'he or she' / 'him or hers'.
Testing plan:
- ensuring modifying tests still pass:
+ C4/SIP/t/06patron_enable.t
+ t/db_dependent/Circulation.t
+ t/db_dependent/Koha/Patrons.t
+ t/db_dependent/Reserves.t
Sponsored-By: California College of the Arts
No code changes detected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
By restoring some pieces of logic, with the name changed from $persona
to $emailaddress, the openid will work again for OPAC logins.
See https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=10988#c68
for an excellent test plan.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Did not test it, but trust in author and signoffer
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Tests are now in t/db_dependent/Search/History.t
- There were 2 differents sysprefs in sysprefs.sql and in atomicupdate => fixed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Added a syspref LoadHistory addSearchHistoryToTheFirstLoggedUser to select if you want the system to add the history of searches performed without session when you log in as registered user.
TEST PLAN
1 - Search in the catalogue, check you are not logged
2 - Log in : your last history should appear
4 - Log out
5 - Apply the patch
6 - Repeat 1 and 2
7 - Desactivate the syspref addSearchHistoryToTheFirstLoggedUser
8 - Repeat 1 and 2 : your last history shouldn't appear
The Unit test doesn't rollback but delete the added lines : the function get_template_and_user allway sets the autocommit to 1.
https://bugs.koha-community.org/show_bug.cgi?id=8010
Tested 3 patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
From opac/opac-memberentry.pl, authnotrequired is set.
That means a patron can access the page without being logged in. It is
used on this page for the self registration feature.
From C4::Auth::get_template_and_user, we have
$userid = $q_userid;
$q_userid is previously set to the 'userid' CGI param.
We end up here if authonotrequired is set AND CGISESSID does not exist.
Test plan:
- Run:
$ prove t/db_dependent/Auth.t
=> FAIL: Regression test for checkauth fails
- Apply this patch
- Run:
$ prove t/db_dependent/Auth.t
=> SUCCESS: Tests pass.
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This features would add the ability to create clubs which patrons may be
enrolled in. It would be particularly useful for tracking summer reading
programs, book clubs and other such clubs.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Ensure your staff user has the new 'Patron clubs' permissions
4) Under the tools menu, click the "Patron clubs" link
5) Create a new club template
* Here you can add fields that can be filled out at the time
a new club is created based on the template, or a new enrollment
is created for a given club based on the template.
6) Create a new club based on that template
7) Attempt to enroll a patron in that club
8) Create a club with email required set
9) Attempt to enroll a patron without an email address in that club
10) Create a club that is enrollable from the OPAC
11) Attempt to enroll a patron in that club
12) Attempt to cancel a club enrollment from the OPAC
13) Attempt to cancel a club enrollment from the staff interface
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
If a patron is not allowed to access the staff interface because its IP
address in the authorised range of IPs, the cookie should not contain
the CGISESSID.
If it is, the patron is logged in and will be able to access the staff
interface if he reload the page (or hit another one).
Test plan:
Confirm the that AutoLocation feature is now working as expected.
Note: It seems that this feature has never really worked as intended.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At the OPAC, the AutoLocation feature should not be taken into account:
login to the OPAC from outside the IP range should work
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Those 2 prefs can be independent and it does not make sense to consider
AutoLocation only if IndependentBranches is set.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The example in branches.tt is:
Can be entered as a single IP, or a subnet such as 192.168.1.*
But actually the regex in C4::Auth does not handle subnets.
Test plan:
0/ Apply all the patches
1/ Switch AutoLocation on
2/ Define a subnet (192.168.0.* if your ip is like 192.168.0.X) in the IP
range of your library
3/ Log in on the staff interface
=> Should work
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Persona never really took off, and although many browsers currently
support it, very few services actually implement it.
This has lead to it's founders, Mozilla, to end the project. In their
own words:
=============================================================================
Persona is no longer actively developed by Mozilla. Mozilla has
committed to operational and security support of the persona.org
services until November 30th, 2016.
On November 30th, 2016, Mozilla will shut down the persona.org services.
Persona.org and related domains will be taken offline.
If you run a website that relies on Persona, you need to implement an
alternative login solution for your users before this date.
For more information, see this guide to migrating your site away from
Persona:
https://wiki.mozilla.org/Identity/Persona_Shutdown_Guidelines_for_Reliers
=============================================================================
Given the above, and that the Persona authentication methods as a whole
are no longer being actively maintained by anyone anywhere to ensure
ongoing security, we should deprecate the option from koha.
Test plan:
Apply this patch and make sure you do not find any references of Persona
Have a look at patches from bug 9587 and confirm that everything has
been reverted
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Code looks good to me.
Also ran several tests including: Auth.t, Auth_with_shibboleth.t.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
From C4::Auth:
my $patron = Koha::Patrons->search({ userid => $userid })->next;
This should be replaced with
my $patron = Koha::Patrons->find({ userid => $userid });
userid is a unique key
Caught with NYTProf:
# spent 78.9ms making 1 call to Koha::Objects::next
Test plan:
Login at the intranet
Reload the page
=> You must still be logged in
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested by enabling TrackLastPatronActivity and logging in again.
Verified lastseen column in borrowers.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Do not track when the pref has not been enabled.
This patch moves the conditional update in Auth.pm to Koha::Patron.
And adds a test for the new track_login method.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to add the ability to delete patrons who have been inactive for
more than a given time, we need to track down the last time they were
active.
To do that, we need a new DB column in the borrowers table (lastseen).
Note that the borrowers.lastseen column will not be initialised for existing
installations (set to NULL) so inactive existing patrons will never be
deleted.
A workaround would be to init them at the date when the new column will
be added.
Test plan:
0/ Set the new pref TrackLastPatronActivity on
1/ Log in as a patron (staff or OPAC)
2/ Check that the borrowers.lastseen field has been updated with the
current time
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
https://bugs.koha-community.org/show_bug.cgi?id=12276
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Acquisition.pm
The lines filling $row in GetBasketGroupAsCSV may have side-effects when
the library name is not found. This change restores former behavior. Just
theoretically more safe.
Note that it also contained a typo: $row->{deliveryplace} should have been
$row->{$place}.
[2] Auth.pm
checkauth: $branchname = Koha::Libraries->find($branchcode)->branchname;
Should normally be fine, but I rather have an empty string here than
crashing on "Can't call method branchname on undefined value".
Same for sub check_api_auth.
Note that this holds for a larger number of calls, but I am adding a check
here because it is checkauth.
Also removed a duplicate use Koha::Libraries-statement.
[3] Search.pm
Also removed a duplicate use statement for Libraries.
[4] svc/holds
Added an (explicit) use statement for Koha::Libraries.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TODO: Would be better to provide a better way to know if memcache is correctly set
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mojolicious does not set $ENV{REMOTE_ADDR} (neither $ENV{HTTP_*}) as
it may share ENV between different requests.
Fortunately for us, Plack does not!
This is a dirty patch to fix this issue but it seems that there is not
lot of solutions. It adds a remote_addr parameter to
C4::Auth::check_cookie_authin order to send it from
Koha::Rest::V1::startup reading the headers sent by Mojolicious.
Test plan:
Hit /cgi-bin/koha/mainpage.pl
Hit /api/v1/patrons/42
Hit /cgi-bin/koha/mainpage.pl
With this patch applied, everything will be fine and you won't be
logged out.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
0) Have either CAS or Shibboleth authentication enabled under Plack.
1) Hover over the authentication link on the staff client or OPAC, and
notice that it has either '.../opac/...' or '.../intranet/...' instead
of '.../cgi-bin/koha/...'. (This will be a complete dealbreaker for CAS
authentication.)
2) Apply patch.
3) Check links again; they should now have the correct paths.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Did not test CAS or Shibboleth, but no regression found.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Bug 14507 introduced the use of checkpw in C4::SIP::ILS::Patron so that
non-Koha internal authentication processes would be able to function via
SIP ( LDAP et al ).
The problem is that checkpw changes the userenv to that of the patron!
This is not usually an issue in Koha because most of the time that
patron running through checkpw is the one to be logged in.
Aside from SIP2 the only other area where this may be an issue is in SCO
when using SelfCheckoutByLogin.
Test Plan:
1) On master, check out an item to a patron via SIP2
2) Note the checkout lists the item as having been checked out
from the patron's home library not matter which library is was
supposed to be checked out from.
3) Apply this patch
4) Re-checkout the item
5) The item should now be checked out as if it was checked out from
the library as defined in the SIP configuration file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This uses a hacky but simple method to get the correct script name under
proxied packaged Plack.
Test plan:
1) Log out of both the OPAC and staff side.
2) Try to access a page that requires login (opac-reserve.pl is a
good one for the OPAC), then log in.
3) You will be redirected back to mainpage.pl or opac-user.pl.
4) Repeat above for both staff side and OPAC.
5) Apply patch.
6) Repeat steps 1-4; you should be redirected back to the original
page you were on.
7) Repeat the above for both a traditional CGI and kohadevbox/package
Plack installation.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are 2 prefs to drive this feature: StaffAuthorisedValueImages and
AuthorisedValueImages. AuthorisedValueImages is not added by
sysprefs.sql and does not appear in updatedatabase.pl, we could easily
imagine that nobody uses it.
With XSLT enabled, the feature is only visible on a record detail page
at the OPAC, if AuthorisedValueImages is set. Otherwise you need to turn
the XSLT off. In this case you will see the images on the result list
(OPAC+Staff interfaces) and OPAC detail page, but not the Staff detail
page.
This patch suggests to remove completely this feature as it does not
work correctly.
The ability to assign an image to an authorised value is now always
displayed, but the image will only be displayed on the advanced search
if defined.
Test plan:
Confirm that the authorised value images are no longer visible at the
opac and the staff interfaces.
The prefs should have been removed too.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently if not logged in when browsing to
http://YOURCATALOG/cgi-bin/koha/sco/sco-main.pl
You are redirected to opac-auth.tt and SCOUserCSS and SCOUserJS are not
loaded. This page passes through a parameter to the template to indicate
this is an SCO login and appropriate CSS and JS should be loaded.
Additionally this patch ensure that when loggin in using the form you
are redirected to the sco-main.pl instead of the patron account page for
the user.
To test:
1 - Verify that normal login works on both staff and opac
2 - Verify that SCO link goes to login page if AutoSelfCheckAllowed is
set to "Don't allow"
3 - Enter changes into SCOUserJS and SCOUserCSS and observe these are
present on SCO log in page with AutoSelfCheck disabled
4 - Verify that a logged in opac user without permissions cannot access
the self-checkout module
5 - Verify that AutoSelfCheckAllowed and associated system preferences
function as expected
6 - Verify the AutoSelfCheck user is logged out if they attempt to visit
another page
Followed test plan.
If I go to http://YOURCATALOG/cgi-bin/koha/sco/sco-main.pl, CSS and JS trigger already on
the login form, I suppose that is intended.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
The login page should not be displayed if the page is displayed in a
frame.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Test Plan (remains the same):
0) Back up your database
1) Apply all these patches
2) In your mysql client use your Koha database and execute:
> DELETE FROM systempreferences;
> SOURCE ~/kohaclone/installer/data/mysql/sysprefs.sql;
-- Should be no errors.
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see 4 entries.
> QUIT;
3) Restore your database
4) Run ./installer/data/mysql/updatedatabase.pl;
5) In your mysql client use your Koha database and execute:
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see the same 4 entries.
6) Log into the staff client
7) Home -> Koha administration -> Global system preferences
8) -> OPAC
-- make sure your OPACBaseURL is set (e.g. https://opac.koha.ca)
9) -> Administration
-- There should be a 'Google OAuth2' section with the ability
to set those 4 system preferences.
10) In a new tab, go to https://console.developers.google.com/project
11) Click 'Create Project'
12) Type in a project name that won't freak users out, like your
library name (e.g. South Pole Library).
13) Click the 'Create' button.
14) Click the 'APIs & auth' in the left frame.
15) Click 'Credentials'
16) Click 'Create new Client ID'
17) Select 'Web application' and click 'Configure consent screen'.
18) Select the Email Address.
19) Put it a meaningful string into the Product Name
(e.g. South Pole Library Authentication)
20) Fill in the other fields as desired (or not)
21) Click 'Save'
22) Change the 'AUTHORIZED JAVASCRIPT ORIGINS' to your OPACBaseURL.
(http://library.yourDNS.org)
23) Change the 'AUTHORIZED REDIRECT URIS' to point to the new
googleoauth2 script
(http://library.yourDNS.org/cgi-bin/koha/svc/auth/googleopenidconnect)
24) Click 'Create Client ID'
25) Copy and paste the 'CLIENT ID' into the GoogleOAuth2ClientID
system preference.
26) Copy and paste the 'CLIENT SECRET' into the GoogleOAuth2ClientSecret
system preference.
27) Change the GoogleOpenIDConnect preference to 'Use'.
28) Click 'Save all Administration preferences'
29) In the OPAC, click 'Log in to your account'.
-- You should get a confirmation request, if you are
already logged in, OR a login screen if you are not.
-- You need to have the primary email address set to one
authenticated by Google in order to log in.
30) Run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^(use vars .*)\$VERSION\s?(.*)/$1$2/' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The singleBranchMode system preference does not make sense.
Either the install has only 1 library defined or several. In both case,
we can easily guess the behavior to follow.
So the idea of this patch is to replace the fetch of this syspref with a
call to count the number of libraries defined in DB.
Test plan:
1/ From a fresh Koha install, execute the DB entry to remove the pref.
2/ Define only 1 library
3/ Confirm that Koha behaves the same as before (try to change your
library, look at the facets)
4/ Create another library (or more) and reinsert the pref and set it:
insert into systempreferences (variable, value)
values('singleBranchMode', 1);
5/ Execute the DB entry
You should get a warning message.
6/ Repeat 3.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Does what it says, but will change behaviour for any Koha install that
has 2 branches defined, One circulation, and this preference set.
If that is an acceptable change, we might need to make sure this is noted well in the
release notes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Log you in!
Without this patch applied, you will get a warning
"Fetching the value or values of a single named parameter"
With this patch applied, the warning from C4::Auth line 401 should not
appear anymore in the log file.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note: no warnings for older CGI versions.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If you use multiple instances on one server, you could have the situation
that instance A creates the cgisess subfolder and instance B could have a
permission problem. This patch resolves that by allowing each instance to
have its own cgisess subfolder.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When some users want to improve performance, one suggestion is to switch the syspref "sessionstorage" to 'tmp',
which store the session info in the /tmp directory instead of the database.
Depending on the frequency of the cleaning process (or lack thereof),
this can be heavy pollution into the /tmp directory, making it unusable.
"rm cgi*" would not even work since cgi* extends to over 8000 items...
A simple fix is to modify the target directory in C4/Auth.pm to /tmp/cgisess.
Testing scenario:
1) change the syspref SessionStorage to 'tmp'
2) Log into the OPAC, validate that a file named /tmp/cgisess_(something) got created
3) Apply the patch
4) Log into the OPAC, validate that a file /tmp/cgisess/cgisess_(something) got created
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised. Session files are created in /tmp/cgisess/ instead
of directly in /tmp. I usually store sessions in memcached, but a
couple of times memcached has died on me, and before I knew it, /tmp
was so full of sessions files, I could not easily delete them with
"rm /tmp/cgisess*". Being able to delete /tmp/cgisess/ should be a
bit easier.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan
1/ enable OpacAddMastheadLibraryPulldown
2/ Defined a group of libraries as searchdomain
and tick 'show in pull down'
3/ At the OPAC, go on the advanced search form, limit by the group of
libraries you have just created.
4/ The group should be selected by default in the dropdown list
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
http://bugs.koha-community.org/show_bug.cgi?id=15294
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This is similar to bug 12877
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
While this is missing a detailed test plan, what I did to test was
1/ Login to koha .. it works
2/ Apply patch
3/ Login to koha .. it still works, no regressions. I can't test the
shibboleth part but it doesnt break anything else so I'm happy to sign
off
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
We had to implement this fix for one of our customers using Shibboleth.
Can verify that it fixes the issue (which, incidentally, breaks
stage-marc-import since that depends on a constant sessionID).
Passing QA (verified with QA tools). Thanks, Martin!
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine does a lot a processing and should only be called when
necessary.
In the get_template_and_user subroutine (so called from any pages of
Koha), it is call to pass the branchcode, title, firstname, surname and
borrowernumber values for the logged in user.
This subroutine calls GetMemberAccountRecords which retrieve the items
infos for all accountlines entries of the logged in user.
On members/members.pl, let's say you have 74 entries in the accountlines
tables, the page will execute 115 SELECT instead of 35 if you don't have any
accountlines entries.
With this patch, the number of SELECT is always 31.
To test this patch you should have technical skills to know what to do.
Note that USER_INFO was an array of... 1 element. Now it's a hashref.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch enable use of IntranetUserCss on staff client
login page.
To test:
1) Add something to IntranetUserCSS to modify login page,
for example
#login h1 a {
height:30px;
}
2) Logout from staff client, no changes on login page.
3) Apply the patch
4) Reload, now logo is cut in half :)
Bonus) Login again an try changing image, add
#login h1 {
background: url(http://example.com/img/other-logo.png) no-repeat top center;
}
and fix height. Logout and check
This also affects 3.20 and perhaps earlier versions.
Re-upload to fix examples
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The SCO user should only be allowed to access to the SCO module.
This patch make the session ends if the user tries to access another
page after the SCO module.
Test plan:
0/ Configure the SCO module correctly
1/ Go on the sco main page (sco/sco-main.pl)
2/ Try to go somewhere else: you should not be logged in
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Extends login screen to pass along #hash
* Adds JSONP support to C4::Service
* Extends humanmsg to allow per-message classes
* Adds proper charset to results of svc/bib
Test plan:
1. C4/Auth.pm and .../intranet/.../auth.tt: verify that login/usage
works as expected, despite the change to pass on the fragment (...#blah)
from the URL.
2. C4/Service.pm and humanmsg.js: verify that editing system
preferences (the main user of these modules) works correctly despite
updates.
3. svc/bib: verify that records can be correctly downloaded with the
change of character set. This can be done in a Firebug/Chrome Devtools
console by running `$.get('/cgi-bin/koha/svc/bib/1')` and inspecting the
results (possibly replacing 1 with a different valid biblionumber).
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
These 2 fields are not used anymore, but we want to keep them anyway.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
CGI->url does not return the correct url on install using packages.
Test plan:
1/ Try to reproduce the bug from the description of bug 15005.
You should be able to login to the intranet and the OPAC
2/ Send a basket and a list from the intranet and the OPAC.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Mubassir Ahsan asked on the Koha mailing list:
Is there any option to set Saturday as the first day of
the week? Please help me.
CalendarFirstDayOfWeek is currently either Sunday|Monday.
By converting it to 0|1|2|3|4|5|6
(Sunday, Monday, ..., Saturday), we can allow any day of the
week to be the first day of the week in the date picker.
TEST PLAN
---------
1) Backup DB
2) In mysql:
> DELETE FROM systempreferences;
> SOURCE .../installer/data/mysql/sysprefs.sql
> SELECT variable,value FROM systempreferences;
-- It should say 'CalendarFirstDayOfWeek' and '0'
May say '1' if you are using Norwegian.
3) Restore your DB
4) .../installer/data/mysql/updatedatabase.pl
-- If your previous value for 'CalendarFirstDayOfWeek' was
'Sunday', it should be '0'. For 'Monday', it should be '1'.
5) Test an installation with 'de-DE' as the language.
-- The default value should be '1'.
6) Test an installation with 'nb-NO' as the language.
-- The default value should be '1'.
7) In the staff client, confirm that any day of the week is
available in the I18N/L10N system preferences for the
CalendarFirstDayOfWeek dropdown.
-- I'm aware they aren't in order, but I'm after
functionality, not finesse.
8) In another tab, go to a staff place that has a datepicker.
For example, Home -> Tools -> Inventory/stocktaking
9) For each possible value in the CalendarFirstDayOfWeek,
go to the other tab, refresh the page after updating the
system preference, and click the datepicker icon.
-- The date picker should then start on the selected
day of the week.
10) Log into OPAC
-- This may require setting: opacuserlogin to 'Allow'.
11) Click the personal details tab on the left.
12) There is a date picker for the date of birth.
-- The date picker should then start on the selected
day of the week.
13) Run koha QA test tools.
NOTE: not an atomic update, since this is an old patch.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
