If not counting patrons holds, found or unfound, we no longer need this option
introduced by bug 28078
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes three changes:
1 - The borrower's own holds are not counted towards HighHolds limit
2 - We exclude all hold counts from CanItemBeReserved
3 - Static mode should only decrease hold when over the decreaseLoanHighHoldsValue, not when equal
Previously a patron's hold could put the count over the threshhold, and
if the patron is only allowed 1 hold per record, and the hold wasn't found before
the checkout, it would make all items unholdable, thus lowering the theshhold for
dynamic HighHolds
To test:
1 - Set sysaprefs:
decreaseLoanHighHolds - enable
decreaseLoanHighHoldsDuration - 1
decreaseLoanHighHoldsValue - 1
decreaseLoanHighHoldsControl - "over the number of holdable items on the record" / dynamic
decreaseLoanHighHoldsIgnoreStatuses - blank
2 - Set circ rules to allow 1 hold per record and loan period of 5
3 - Find/create a record with 3 items
4 - Place a title level hold for two different patrons
5 - Attempt to checkout item - note warning about high holds
6 - Cancel checkout
7 - Set decreaseLoanHighHoldsControl - "on the record" / static
8 - Attempt checkout - note warning about high holds
9 - Apply patch
10 - Checkout item - no warning
11 - checkin item, replace hold
12 - Set decreaseLoanHighHoldsControl - "over the number of holdable items on the record" / dynamic
13 - Checkout item - no warning
14 - prove t/db_dependent/DecreaseLoanHighHolds.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This shows that HomeOrHoldingBranch syspref is incorrectly not used by
_CalculateAndUpdateFine() when it decides which circ rule to use.
Run "prove t/db_dependent/Circulation/_CalculateAndUpdateFine.t" to
notice the tests now fail.
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This shows that HomeOrHoldingBranch syspref is incorrectly not used by
TooMany() when it decides which circ rule to use.
Run "prove t/db_dependent/Circulation/TooMany.t" to notice the tests
now fail.
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run without next patch. Should fail.
Run with next patch. Should pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=31881
Make use of Koha::Cache::Memory::Lite to avoid hitting the database and
creating plugins object for every call to Koha::Plugins->call
Test plan:
1. Make sure plugins still work by executing
`prove t/db_dependent/Koha/Plugins/Plugins.t`
2. Run the test script provided in the following patch to see how it
affects performances
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds test data to prove that all authorizations
for subpermissions are set when only a top level flag is set.
To test:
0) Apply patch
1) prove ./t/Koha/Auth/Permissions.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch ensures HoldFeeMode is considered when displaying a message
to patrons on the OPAC that says they'll be charged a hold fee when
placing or collecting the hold.
When HoldFeeMode is set to not_always or "only if all items are checked
out and the record has at least one hold already" then the hold fee
message should only show if all items on the record are checked out, AND
the record has at least one hold already - both of these conditions must
be met.
To test:
1. Go to Administration -> Patron categories
2. Edit your patron category and give a hold fee of $1.
3. Go to Administration -> System preferences and search for
HoldFeeMode. Set to 'only if all items are checked out and the record
has at least one hold already' if not already set. Keep this tab open.
4. In another tab, open the OPAC.
5. Search the OPAC for a record with one item which is NOT checked out.
6. Go to place a hold on this record. Confirm you see a message saying
that you will be charged a hold fee, even though not all items are
checked out and the record does not have a hold --> This is the bug.
7. Apply patch and restart services.
Items available, no holds placed
8. Repeat steps 5-6. This time, you should NOT see the hold fee message.
Items available, holds placed
9. In your staff interface tab, find the same record.
10. Place a hold for a different patron on this record.
11. In your OPAC tab, find this record again and go to place a hold. You
should NOT see the hold fee message.
No items available, no holds placed
12. In your staff interface tab, cancel the hold placed on this record.
13. Check out the item to a different patron.
14. In your OPAC tab, find this record again and go to place a hold. You
should NOT see the hold fee message.
No items available, holds placed
15. In your staff interface tab, keep the item checked out to another
patron.
16. Place a hold for a third patron on this record.
17. In your OPAC tab, find this record again and go to place a hold. You
SHOULD see the hold fee message.
Multiple holds
18. Search the OPAC for a record. Make sure your search will return more
than one result, including our test record.
19. Check the checkbox for our test record, plus another record where
the item is not checked out.
20. Click the Place hold button to place holds on all of our selected
records. You should only see the hold fee message above our test record.
21. In your staff interface tab, test setting HoldFeeMode to the other
values and confirm the hold message shows on the OPAC as expected.
22. Confirm tests pass t/db_dependent/Reserves/GetReserveFee.t
Sponsored-by: Horowhenua Libraries Trust
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This will fix t/db_dependent/www/batch.t and t/db_dependent/www/search_utf8.t
QA - improvement ideas welcome! It's definitely not the best we can do.
Test plan:
prove t/db_dependent/www/search_utf8.t t/db_dependent/www/batch.t
must return green
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
With the follow-up changes, the return value is no longer a scalar, but
a hashref, but the tests weren't updated accordingly.
This patch fixes this situation.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/Koha/Item.t
=> FAIL: Tests fail
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass!
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This can be used to instruct staff how the item should handled when
it's checked in. For example items notforloan status has been
changed as "Invoiced item" while item has been on loan. When it's
checked in staff sees that they should put item aside for further
processing.
To test:
1. Apply patch and update database if needed
2. Set items notforloan status as -1 (or create new one)
3. Add line "-1: ONLYMESSAGE" to UpdateNotForLoanStatusOnCheckin
4. Check item out for patron.
5. Check item in.
=> Description of notforloan status should be displayed.
=> Confirm notforloan status hasn't changed.
Also prove t/db_dependent/Circulation/issue.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We are seeing the following lines several times in the codebase
$cache->clear_from_cache("default_value_for_mod_marc-");
But values are never set for this key.
Test plan:
Ask you, "Is the above correct?"
Use the correct 'git grep' and 'git log' and confirm the assertion.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Error while executing command: no such element: Unable to locate element: //*[@id="circ_returns_checkin"]/div[2]/div[1]/div[2]/button at /usr/share/perl5/Selenium/Remote/Driver.pm line 411.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Cannot wait more for element '//input[@type="submit"]' to be visible at /kohadevbox/koha/t/lib/Selenium.pm line 189.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The tests create a new branch to make sure one exists without rules. We then add a rule
and delete it. We can simply create the new branch and never assign a rule
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The code for get_processingreturn_policy was very similar to
get_lostreturn_policy. Combining the two methods allows for use of
get_effective_rules which uses get_effective_rule_value which is cached.
This should reduce lines of code and improve performance
Tests updated and adjusted as well
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement gives the ability to set a policy for the lost item
processing fee that may get charged additional to the lost item
replacement cost. The processing fee can be:
- refunded
- refunded if unpaid
- kept
To test:
Set-up
1. Find an item, Item A. Go to Administration -> Item types and edit the
item type for Item A. Add a default replacement cost and a processing
fee and Save.
2. Go to Administration -> system preferences and set the following:
- WhenLostChargeReplacementFee: Charge
- BlockReturnOfLostItems: Don't block
3. Scroll down to the default lost item fee refund on return policy. Set
the refund lost item replacement fee policy to 'refund lost item charge'.
4. Edit Item A and set a replacement cost.
Reproduce
5. Check out Item A to Patron A.
6. Click the barcode to view Item A's information. Edit Item A and set
the Lost status to 'lost'.
7. Go back to Patron A's checkouts. The item should now be checked in
with two new charges applied - a lost item fee (the item's replacement
cost) and a lost item processing fee (set in item types).
8. Check in Item A to mark it as found.
9. Go back to Patron A's account. Notice the lost item fee has been
refunded, but the processing fee remains.
10. Manually pay or write off the processing fee. This enhancement
removes the need for this manual step.
11. Apply the patch and restart services
Test with lost item - refund
12. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'refund lost item
processing charge'.
13. Repeat steps 6 to 9.
14. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded.
15. Repeat steps 6 to 8 (do not check it yet).
16. Go back to Patron A's account. Pay the processing fee.
17. Repeat step 9.
18. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded (you'll now be in a credit because the
paid processing fee was also refunded).
Test with lost item - refund_unpaid
19. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'refund lost item
processing charge (only if unpaid)'.
20. Repeat steps 6 to 9.
21. Go back to Patron A's account. Both the lost item fee and processing
fee should have been refunded.
22. Repeat steps 16 to 19.
23. Go back to Patron A's account. The lost item fee should have been
refunded but not the processing fee, as this was already paid.
Test with lost item - leave
24. Go to Administration -> circulation and fines rules. Scroll down to
the default lost item fee refund on return policy. Notice there is now a
refund lost item processing fee policy. Set this to 'leave lost item
processing charge'.
25. Repeat steps 6 to 9.
26. Go back to Patron A's account. The lost item fee and processing fee
should have been refunded but not the processing fee.
Other tests
27. Confirm tests pass
- t/db_dependent/Koha/Item.t
- t/db_dependent/Koha/CirculationRules.t
Sponsored-by: Auckland University of Technology
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. prove t/db_dependent/Illrequests.t
2. Observe test failure
1..3
ok 1 - before change, original borrowernumber found
not ok 2 - after change, changed borrowernumber found in holds
# Failed test 'after change, changed borrowernumber found in holds'
# at t/db_dependent/Illrequests.t line 167.
# got: '3786'
# expected: '3787'
ok 3 - after change, changed borrowernumber found in illrequests
# Looks like you failed 1 test of 3.
not ok 4 - store borrowernumber change also updates holds
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In those rare cases when authorities are updated by an external agency (or
even internally, by reviewing and correcting an exported authority file)
when the heading tag will be changed (seems odd but happens:
111 Congress ==> 110 Corporate body.Congress ;
100 Person ==> 110 Corporate body (a company named with person's name ;
151 City--object ==> 150 Object (city) etc.)
and then the authority record in Koha database will be updated with
bulkmarcimport or by calling directly ModAuthority from a custom script,
the merge function "doesn't know" that the change to the authority type
has been made and, consequently, doesn't adequately change the tag in
related fields in biblio records (as it would if two different records
with different authtypecode were merged with Koha interface).
This is because at the moment when merge function is being called
by ModAuthority:
Koha::Authority::Types->find($autfrom->authtypecode)
Koha::Authority::Types->find($authto->authtypecode)
both have the same value (because $mergefrom == $mergeto).
Therefore in case when $mergefrom == $mergeto and the heading tag changes,
$authtypefrom and $authfrom calculated in merge in the ordinar way are
misleading and should not be taken unto consideration.
Test plan:
==========
1. run t/db_dependent/Authority/Merge.t
2. you should see problems in "Test update A with modified heading tag
(changing authtype)"
3. apply the patch
4. run t/db_dependent/Authority/Merge.t again
5. the test should pass
Alternatively:
1. have an authority record used in biblio;
export it to file;
change 1XX heading tag to a different (but reasonable) value
and possibly change also the content of the heading
(one can delete also 942 but it doesn't matter);
make bulkmarcimport.pl -a -update -file <modified_auth_file> and
see that the tag in biblio record has not been changed (whereas
the type of authority record did change);
2. make orders in database (so that the authority type and the tag of
the field in biblio record correspond); apply the patch;
3. repeat the test from 1.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We are now using the patron category selects on almost all system
preferences, but OpacHiddenItemsExceptions was still missing.
To test:
- Before applying the patch:
- Add patron categories to OpacHiddenItemsExceptions using |
- Add configuration to OpacHiddenItems
- Verify all works as expected in the OPAC
- Apply patch, run database update
- Verify the system preference shows the correct settings from before
- Verify feature still works as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
SendPasswordRecoveryEmail relies on the calling script to tell if there is an
existing valid recovery already. If there's an expired recovery-entry the
members/notices.pl script will try to create a new entry resulting in a duplicate
key error.
This patch fixes the bug by removing the need for the calling script to do the check as
since SendPasswordRecoveryEmail does the same thing anyway.
SendPasswordRecoveryEmail will now use DBIx ->update_or_create instead of looking at
the $update param to determine if it should update an existing entry or create a new.
The update param is removed from all calling scripts and test are updated.
To test:
1. Generate a password recovery mail for a patron
2. Let it expire.
3. Generate a new password recovery from staff to the same patron - Fail!
4: Apply patch
5. Generate a new password recovery from staff to the same patron - Success!
6. Opac password recovery flow should also work.
7. Tests pass.
Sponsored-by: Lund University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds support for searching additional_fields when retrieving
invoices using C4::Acquisition::Invoices.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Acquisition.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a tst for copy without subfields. I also clarify what eachstep does
so the next user/coder understands current behaviour
Update existing or add new: In the case where the field/subfield exists
we update, if we have two fields - one with the subfield, and one without, we
add the subfield to the one without
Copy field:
- If given a subfield - we will add to existing fields in the record
- If not given a subfield - we create an entirely new field
The logic of all of this is tricky, makes sense in a certain light, any complaints
are for a new bug :-)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run test again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Move a few tests into separate subtests.
Replace the BEGIN block.
Test plan:
Run test again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run test again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replacing the vars statement.
Adding a larger subtest.
Removing TransformVersionToNum.
Test plan:
Run t/db_dependent/Context.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Set "RenewalPeriodBase" syspref to "the current date",
"CircControl" to "the library the item is from." and
"HomeOrHoldingBranch" to "the item's home library (homebranch)."
2) Run tests in t/db_dependent/Circulation.t and verify
that fails (the script should actually crash before all
can be run).
3) Apply the patch
4) Verifiy that all tests now pass
Sponsored-by: Gothenburg University Library
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
A subest in t/db_dependent/Holds.t leaves behind database cruft.
Test Plan:
Using koha-testing-docker:
1) SELECT branchcode FROM branches
2) prove t/db_dependent/Holds.t
3) SELECT branchcode FROM branches
Note cruft
4) reset_all
2) prove t/db_dependent/Holds.t
3) SELECT branchcode FROM branches
No cruft!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Resolves:
Use of uninitialized value $request_method in string eq at /usr/share/koha/C4/Auth.pm line 1122.
Use of uninitialized value $return in numeric gt (>) at /usr/share/koha/C4/Auth.pm line 1155.
We also remove the double logout from Auth.t
Test plan:
Run t/db_dependent/Auth.t
Check if you do not see the warns anymore.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Comment speaks for itself. Look at surrounding code.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Try t/db_dependent/Koha/Auth/TwoFactorAuth.t on cmd line.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need to replace 0 with 'disabled', and 1 with 'enabled'
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes not required (for now) query parameters as we can
query using q= on those. They can be added back eventually, if needed.
Attributes now match the database as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch alters the code in the ES QueryBuilder. Reflecting
how things are handled in build_query_compat we clean the query,
but not the limits. In Zebra we simply recursivly call buildQuery,
but the ES query structure
This patchset adds a new ability to save searches on the staff client, and display them in the results
page on staff or opac as a new filter.
New filters can be added from the results page after a search, and there is an admin page for updating
deleting and renaming filters
There is a new permission to control management of these filters
New filters can be added that are not displayed along with facets, this allows for building custom links
using these filters to keep URLs shorter
Due to bug 30528 testing in ES is recommended
To test:
1 - Apply patches and update database and restart all
2 - Enable new system preference 'SavedSearchFilters'
3 - As superlibrarian perform a search in staff client, something broad like 'a'
4 - Note new 'Save search as filter' link on results page
5 - Click it, save search as new filter, check 'Staff client' visibility
6 - Perform another search
7 - Note the filter now appears above facets
8 - Click to it filter results
9 - Note results are limited by the new filter, and it is checked in the facets
10 - Confirm click the [x] removes the filter
11 - Go to administration->search filters
12 - Confirm the filter appears
13 - Edit and mark as OPAC visible
14 - Test OPAC to ensure it shows and can be applied/removed
15 - Copy URL with filter applied
16 - In adminsitration mark filter as not visible on staff or opac
17 - Confirm link above still works
18 - Create a new staff with catalogue and search filters permission
19 - Ensure they can access/save filters
20 - Remove filter permission and ensure they cannot
21 - Disable system preference
22 - Confirm links to search filters page are removed from admin home and admin sidebar
23 - Confirm filters do not appear on results and cannot be created
24 - Enable pref
25 - Create a filter
26 - From search filters page, click 'Edit search'
27 - Confirm you are taken to advanced search page letting you know which filter you are editing
28 - Confirm you can change searhc options and save
29 - Confirm you can perform the search from this page
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Michal Urban <michalurban177@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds the API routes and tests
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run xt/find-missing-filters.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It can be useful to know exactly what template was used to generate a notice. To this end, it would be useful to store the letter id as a foreign key in the message queue table.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Run an action that will send a notice to a patron
5) Note the letter id is now in the message_queue table for that notice!
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1) Apply this patch
2) Run updatedatabase.pl
3) Verify CircControlReturnsBranch is set to home library by default
4) Set a Return policy for Branch A to "Item returns home" ( homebranch )
5) Set a Return polity for Branch B to "Item returns to issuing library" ( holdingbranch )
6) Set a Return polity for Branch C to "Item floats" ( noreturn )
7) Create an item with homebranch of Branch A, holding branch of branch B
8) Log in as Branch C
9) Set CircControlReturnsBranch to "the library the item is currently held by"
10) Check the item in, note it should be returned to the holding library
11) Set CircControlReturnsBranch to "the library the item is owned by"
12) Check the item in, note it should be returned to the home library
13) Set CircControlReturnsBranch to "the library you are logged in at"
14) Check the item in, note it should float
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit adds unit tests for Bug 14783.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
What this patch does:
- change the navigation bar style
- change the breadcrumbs style
- change the "last borrower" link style
- move the search bar inside the navigation bar
- move the help link to the same row as the breadcrumbs
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 28730 added the ability to format due dates based on Koha's date format, but missed formatting the due date field in the item information response.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/SIP/Message.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Cab Vinton <director@plaistowlibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes holds' GET REST API endpoint permission
to place_holds to match with request.pl
Test plan:
1) prove t/db_dependent/api/v1/holds.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the subroutine ModDateLastSeen we unset an item's lost status when
checked in.
This routine passes a noi log parameter to the store request, this is
to avoid spamming the cataloguing log on every checkin.
When marking an item unlost we should record this change.
To test:
1 - Enable cataloguing log
2 - Mark an item lost
3 - View the log and confirm this chagne was recorded
4 - Check the item in
5 - The message indicates item is now found, but logs have no new entry
6 - Apply patch, restart all
7 - Mark the item lost and verify it is logged
8 - Check the item in, reported found and log entry recorded
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The question whether item is denied renewal doesn't depend on
circulation rules or the patron, it is only a property of the item and
only changes to the item's attributes can cause the return value of
the check to change, thus we should move this to be a method of
Koha::Item.
To test:
1) Run unit tests
$ prove t/db_dependent/Circulation.t
$ prove t/db_dependent/Koha/Item.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Creates new test file GetBasketGroupAsCSV.t
Test with :
prove t/db_dependent/Acquisition/GetBasketAsCSV.t
prove t/db_dependent/Acquisition/GetBasketGroupAsCSV.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This unit test confirms that we are not triggering the Password Change
notification notice upon patron creations.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Disable password change notifications for the api test to negate the
need for setting up notices.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves tests to the right file (singular class name). It also
refactors them a bit, in order to cover more cases, including the
syspref split one.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/Koha/Patron/Category.t \
t/db_dependent/Koha/Patron/Categories.t
=> SUCCESS: All good.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Run tests (Categories.t has been updated by me, and I suggest running
Suggestions.t to confirm it still passes):
sudo koha-shell kohadev
prove t/db_dependent/Koha/Patron/Categories.t
prove t/db_dependent/Koha/Suggestions.t
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Rhonda Kuiper <rkuiper@roundrocktexas.gov>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
[1] NotifyPassowrdChange => NotifyPasswordChange
[2] Someone has changed your library user account password.
Scary? Changed it myself. Reworded it a bit.
[3] is( $THE_notice->status, 'failed', "The notice was sent immediately");
Note that THE_notice is imo horrible :) Wont touch it though.
But I think we should reword 'sent' since it just failed.
And we actually should mock sending mail here. Adding FIXME.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a unit test to check that the notice is enqueued and
sending is attempted immediately.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a unit test to the Auth_with_ldap.t to confirm welcome
notices are send when replace + welcome are enabled in the
configuration.
We also add a snippet to hide 'Subroutine redefined' warnings in this
test as it makes the test output rather challenging to read and the way
the test is written these warning are expected.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See comment36 and comment37. This needs more attention but
serves as a quick fix only.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
No need to keep it.
Fixing a test description too.
Test plan:
Run t/db_dependent/Context.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Lund University Library, Sweden
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
marc_subfield_structure.kohafield can be NULL, but it can also be an
empty string. But in that case, Koha::Item::as_marc_field ignores them,
which means the resulting MARC::Field object has missing data.
This can produce a bug in OPAC ISBD view (and probably other places
where this method is used)
Test plan:
1. Edit the default biblio MARC framework for the item field: find or
create a subfield that is not linked to a DB column.
Save even if you made no changes to make sure that
marc_subfield_structure.kohafield is set to an empty string.
I'll use 995$Z as an example for the following steps.
2. Add the following to syspref OPACISBD:
#995|<br>Item:|{995Z}|
3. Create a biblio with an item and put a value into 995$Z
4. Go to the ISBD detail page for this record at OPAC. Confirm that the
value you entered in 995$Z is not visible
5. Apply patch and restart koha
6. Refresh the ISBD detail page. Confirm that the 995$Z is now visible.
7. Run `prove t/db_dependent/Koha/Item.t`
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Subtest for testing nullability of host, syntax and encoding.
Test plan:
Run prove t/db_dependent/Koha/Z3950Servers.t.
(Note: you need strict mode to pass this test.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
No real changes, just moving code and indentation.
Ground work for following patch.
Test plan:
To let the test pass, disable strict_mode in koha-conf.
Run perl t/db_dependent/Koha/Z3950Servers.t. Should pass now.
However, in strict mode or with prove, it should fail.
Run prove t/db_dependent/Koha/Z3950Servers.t. Failed?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When run under certain circumstances (in jenkins, for example) some ENV
variables are set for convenience, like PLACK_WORKERS and
PLACK_MAX_REQUESTS and is causing some tests to fail (notably, shib
ones).
This patch makes the regex only consider PLACK_ENV when testing for the
underscore case.
Tests are updated accordingly, and they are also rewritten to test for
boolean values instead of empty string, or zero or one, etc. The
implementation shouldn't matter as long as the boolean evaluation is
correct and it is clearer for devs what to expect.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Run unit tests:
sudo koha-shell <instance>
cd t/db_dependent/Koha
prove -v Patron.t
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Previous commit correctly lists Zebra availability test, but was a
bad edit. This fixes the availability test to use itemlost
Additiionally, tests were written before limits were agreed. Adjusted
for the current settings
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
+ # Assume permission if context has no user
+ my $can_manage_background_jobs = 1;
=> This felt a bit unsafe.
Test plan:
Try interface for jobs. Call API with cookie. Call API with OAuth.
Run t/db_dependent/Koha/BackgroundJobs.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the following changes to the 'background_jobs' API:
* We now call them 'jobs'
* Removed deprecated query parameter definitions
* Added only_current query parameter
* Controller gets adapted to use $rs->filter_by_current when
only_current is passed
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The following bugs refined permissions a bit, and the change was missing
on the tests:
* 23681
* 30335
Bonus: sorted permissions alphabetically for readability.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The test in question concerns non-superlibrarian staff users.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch refactors the setting of user permissions for templates into
a new function, which can be easily unit tested and reduces the amount
of code in C4::Auth::get_template_and_user(). It also aids in the
re-usability of permission checking code.
Test plan:
0) Apply patch and koha-plack --restart kohadev
1) prove t/Koha/Auth/Permissions.t
2) As koha superlibrarian, go to
http://localhost:8081/cgi-bin/koha/tools/tools-home.pl
3) Go to http://localhost:8081/cgi-bin/koha/members/members-home.pl
4) Create new test user with "Staff access..." and "Remaining circulation permissions"
5) Logout of koha superlibrarian
6) Login as test user
7) Note you can only see a limited view of the staff interface
(i.e. no administration, no tools, no reports, etc.)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The underscore test comes from bug 31468.
Context methods should actually be OO.
Test plan:
Run t/Context.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At some point the warn is made conditional for permanent
files. So it failed when TestBuilder picked a zero value
for permanent. Trivial fix.
Test plan:
Run t/db_dependent/Upload.t a few times
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds two new sysprefs:
AutoLinkBiblios
AllowManualAuthorityEditing
Both inherit the setting from BiblioAddsAuhtorities which is removed
To test:
1 -Apply patches
2 - Update database
3 - Confirm old setting is transferred to new option
4 - Confirm you can edit authoriteis manually if AllowManualAuthorityEditing set to allow
5 - Confirm you cannot edit authorities manually if AllowManualAuthorityEditing set to don't allow
6 - Confirm a new bib is linked when AutoLinkBiblios is enabled (set AllowManualAuthorityEditing to add unlinked heading)
7 - Confirm new bib notlinked when AutoLinkBiblios is disabled
8 - Confim new bib not linked when AutoLinkBiblios is enabled, but heading doesn't match an authority and AutoCreateAuthorities is disabled
9 - Confim new bib linked to new authority when AutoLinkBiblios is enabled, but heading doesn't match an authority and AutoCreateAuthorities is enabled
Signed-off-by: AFHDubCoLib <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows you to specify an estimated delivery date per order.
The specified estimated delivery date is also considered when searching
for late orders and exporting late orders. You can also edit the
estimated delivery date from the late orders page.
Test plan:
1. Update database, rebuild schema, restart services
2. Go to Acquisitions, search for a vendor, and create a new basket
3. Add an order to the basket. When filling in the accounting details,
notice the new 'estimated delivery date' field, but don't add a date.
Save the order.
4. Confirm no date shows in the estimated delivery date column in the
orders table.
5. Modify the order. Add a date in the estimated delivery date field and
save the order.
6. Confirm the date now shows in the orders table.
7. Close the basket.
8. Go to the Late Orders page.
9. Put estimated delivery date from and to parameters in the search
filters on the left. Ensure the from and to dates encapsulate the date
you entered in the estimated delivery date field for the order.
10. Click Filter and ensure the order shows.
11. Select the checkbox next to the order. Click the Export as CSV button.
12. Open the CSV and confirm the estimated delivery date that you
entered shows as expected in the file.
13. Click Edit under the estimated delivery date. Confirm the estimated
delivery date modal pops up with the correct order line number in the
modal header.
14. Remove the estimated delivery date and click Save.
15. Confirm that the estimated delivery date calculated by Koha now
shows in the late orders table.
16. Select the checkbox next to the order. Click the Export as CSV button.
17. Open the CSV and confirm the calculated estimated delivery date
shows in the CSV.
18. Confirm tests pass: t/db_dependent/Koha/Acquisition/Order.t
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run t/db_dependent/Circulation/GetHardDueDate.t
Run t/db_dependent/Circulation/OfflineOperation.t
Run t/db_dependent/RotatingCollections.t
Run t/db_dependent/api/v1/libraries.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run t/db_dependent/Koha/AdditionalContents.t
Run t/db_dependent/Koha/Library.t
Note: You may need to set ListOwnershipUponPatronDeletion to
delete to fix a pending issue in patron->delete with lists.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Koha has been able to send arbitrary item fields via the "item_field" parameter in the config. We have partners that need the ability to created custom item fields from templates, as the item_fields feature cannot accomplish what they need. We need to add a templated custom field feature for items, similar to what we have for patrons.
Test Plan:
1) Apply this patch
2) Choose a SIP login to use, edit that account and add the following
*inside* the login section:
<custom_item_field field="IN" template="[% item.itemnumber %]" />
3) Restart SIP
4) Run an item information query
5) Note the itemnumber is sent in the IN field!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: fixed tests count
This patch removes the last remaining uses of transformMARCXML4XSLT and
replaced them with the equivilent RecordProcessor usage.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As requested by Jonathan, we need more flexibility ;)
Here it comes.
Test plan:
Run t/CookieManager.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This change allows us to add catalogue_editor_ to the deny list
in koha-conf.xml and keep cookies like catalogue_editor_123.
Test plan:
Run t/CookieManager.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
To test:
1 - Sign in to staff client
2 - Search for records and edit one
3 - Switch to advanced editor
4 - View cookies (F12/developer panel/storage tab)
5 - Note cookie like 'catalogue_editor_##' with value 'advanced'
6 - Log out
7 - note cookie value deleted
8 - Log in and search/edit a record
9 - Basic editor loads
10 - Apply patch
11 - Add line to koha-conf as described in second patch
12 - Restart all
13 - Switch to advanced editor
14 - Cookie value updated
15 - Logout
16 - Cookie value remains
17 - Log in and search/edit
18 - Confirm advanced editor loads
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new system preference:
autoControlNumber
The option "biblionumber" will set field 001 to the biblionumber when you create a new record
or edit an existing record and clear the 001 field.
If a value is present in 001 when saving the record it will be preserved.
If set to 'OFF' the 001 field wil not be touched
When duplicating a record the 001 will be removed if autoControlNumber is set
To test:
1 - Apply patches and updatedatabase
2 - Create a new record with no 001 field
3 - Save and view the MAC, confirm there is no 001
4 - Set the system preference to 'biblionumber'
5 - Edit the record you created previously
6 - Note the 001 is prepopulated with the biblionumber
7 - Delete the field
8 - Save the record
9 - View the MARC, the 001 is filled with biblionumber
10 - Edit the record
11 - Set the 001 to a different value "Not the biblionumber"
12 - Save
13 - View the marc and confirm the value you entered is retained
14 - Edit a record with an existing 001 that is not the biblionumber
15 - Save and confirm 001 is not updated
To test duplication:
1 - Edit a record as duplicate when using the advanced editor
2 - Confirm the 001 does not load, but record saves correctly
3 - Edit the record
4 - Switch to 'basic editor'
5 - Save, then view record
6 - Edit as duplicate in basic editor
7 - Confirm the 001 is removed
8 - Confirm the 001 is added on save
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Thomas Klausner <domm@plix.at>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adding some Unicode stuff.
And missing txn couple.
Test plan:
Run t/db_dependent/Koha/BackgroundJob.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run t/db_dependent/Koha/BackgroundJob.t
Run t/db_dependent/Koha/BackgroundJobs.t
Prove t/db_dependent/Koha/BackgroundJobs
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
With the different bug reports we removed the calls for those 3
subroutines. We can remove them now.
Test plan:
git grep their names and you should not find any occurrences in the code
base
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the tests less fragile to existing data. It does so by
making sure that when checking if the item would be hidden by
OpacHiddenItems and lost status, the item is not skipped, and thus the
notforloan value, as retrieved from the search engine is picked for the
notforloan_count calculation.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adjusts the code that uses GetOpenIssue to use/find a Koha::Checkout object
instead
To test:
1 - Add a course to course reserves
2 - Create an item with barcode TESTKOC
3 - Add the item to a course
4 - Checkout the item
5 - View course details on stff and opac and confirm item shows as checked out and due date displays
6 - prove t/db_dependent/Circulation/issue.t t/db_dependent/Circulation.t t/db_dependent/CourseReserves.t
7 - Browse to Circulation->Upload offline circulation
8 - Upload a file to return the item: https://wiki.koha-community.org/wiki/Koha_offline_circulation_file_format
9 - Confirm item is returned
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There's been a behavior change in recent MariaDB that made some cases
deal with truncated data in DOUBLE context instead of DECIMAL.
Probably this:
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-27380
This made the affected test fail consistently on those versions.
This trick for checking OpacHiddenItems is correct (as introduced on bug
28125 doesn't really make use of the warning, just prints it in
about.pl) so one option was to just check for a warning.
I decided to keep the test, but add the optional DECIMAL|DOUBLE check on
the qr. This way other eventual changes will make it fail and serve as a
warning in case something more relevant changes.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ t/db_dependent/Koha/Items.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a single patron had more than 1 hold to a biblio and there was only one
available item we allowed incorrectly renewing the checkout when
AllowRenewalIfOtherItemsAvailable was set to "Allow". This
changes CanBookBeRenewed so that it makes sure all the holds are
filled and not just one per patron.
To test:
1) prove t/db_dependent/Circulation.t
2) (Optional, as unit test is provided)
- Set AllowRenewalIfOtherItemsAvailable = Allow
- Create biblio with three items
- Checkout one item to patron A
- Add two biblio-level holds for patron B
- Try to renew patron A's checkout with and without this patch.
- Notice that without this patch the renewal succeeds even though we
one unfilled hold left. After applying the patch the renewal should
fail.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries handle refunding of paid lost fees at a financial office and not within Koha. To facilitate this, it would be good for Koha to have the option to not generate lost returned credits by skipping fully paid lost items, and only refunding the outstanding balance on partially paid lost fees.
Test Plan:
1) Apply this patch
2) Set your lost item refund on return policies to 'Only if unpaid'
3) Mark an item lost, charging the lost fee
4) Return the item, a full refund should occur
5) Mark another item lost, charging the lost fee
6) Make a partial payment on this lost fee
7) Return the item
8) The remaining balance of that fee should be 0, but the patron should
not recieve a credit for the already paid balance
8) Mark another item lost, charging the lost fee
9) Fully pay the lost fee
10) Return the item. The paid lost fee should be unaffected.
11) Run tests in t/db_dependent/Circulation.t
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch handles the final removal of GetTransfers from
C4::Circulation.
Test plan
1/ Check that there is no mention of the GetTransfers method codebase
wide now
2/ Run the circulation and transfers tests and check nothing fails..
perhaps even run the full test suit in k-t-d
3/ Signoff
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replace the call to GetTransfers with the get_transfer method in
Koha::Item in transferbook.t
Test plan
1/ Run t/db_dependent/Circulation/transferbook.t
2/ Confirm it passes
3/ Apply patch
4/ Repeat steps 1-2
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replace the mock of GetTransfers in this test with a mock of transfers
data
Test plan
1/ Run t/db_dependent/Search.t
2/ Confirm it passes
3/ Apply patch
4/ Repeat steps 1-2
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the new classes under ::Patron::Restriction:: and
enhances the Unit tests for those classes.
NOTE: We should drop keyed_on_code as part of bug 31095
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the 'can_be_added_manually' flag. Only non-system
restriction types can be added manually, so we exclude is_system instead
of having two flags. (And we set the 'Manual' that's added at install
time to default but not system).
We then add proper handling for setting the default manual restriction
type in the management page and set the dropdown list to use that value
by default.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes following QA issues:
- convert intaller files as .yml
- change column name readonly as is_system
- change column name is_system as default_value
- add column can_be_added_manually (testplan for this below)
- move syspref "PatronRestrictionTypes" to "Accounting > Features" tab
- tweak page title
- tweak tests to apply these changes
Also atomicupdate files have been updated. Issues with delete and tests
is fixed with adding additional schema change file.
To test:
1) Add new restriction type and make it manual.
2) Navigate to patron details page.
3) Add new restriction to patron.
=> Only selectable restriction should be the one
you just created.
Also prove t/db_dependent/RestrictionTypes.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Renames ronly to readonly and dflt to is_system.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the simple issues mentioned by the QA script.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Loughborough University
Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces opac-ratings-ajax.pl with a new REST API route
POST /public/biblios/42/ratings
Note that we could go further and refactor the 'start_rating' select
code.
Test plan:
Test the "star ratings" feature at the OPAC, on the different page
where it's displayed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Enable ES and index
2 - Set expandedSearchOption to 'show'
3 - Advanced search on staff and opac using Year field on staff and Publication date range on OPAC for:
2005
2005-
-2005
<2005
>2005
2005-2010
4 - Confirm ranges don't work on staff side, but do on opac
5 - Apply patch
6 - Repeat searches - they work on both staff and opac
7 - prove t/db_dependent/Koha/SearchEngine/Elasticsearch/QueryBuilder.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Looks like most of existing code wants comma as default value.
Also impact installer/data/mysql/mandatory/sysprefs.sql.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
and split the subroutine into 2 smaller subroutines (one for ordering,
the other for receiving)
Test plan:
1. Create a vendor and an acquisition basket
2. In this basket, create new orders using all the different methods
(from an existing record, from a suggestion, from a new record, ...)
then close the basket and receive these orders.
Make sure it works the same with and without the patch
3. Run tests in t/Prices.t,
t/db_dependent/Acquisition/populate_order_with_prices.t, and
t/db_dependent/Budgets.t
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the now unused: _update_import_record_marc
Additionally, as items are already present in import biblio we no longer need to embed
them, so that parameter is removed and the option removed from the sub and pod and everywhere
it was used
In all cases, we were embedding, so we don't need a way to get without
Tests updated
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We must not pass $dbh but retrieve it when needed instead
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Has to move some code to a method
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We were having a "Patron is not authenticated yet" comment, but it was not correct,
we set 'number' and 'id' in session, and waiting-for-2FA was not set => the patron is fully authenticated.
The test returned 401 because we fully authenticated user cannot request
an otp token when not waiting for the second auth step.
This situation is already covered (last test of the subtest).
Test plan:
prove t/db_dependent/api/v1/two_factor_auth.t
must return green
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adding a test for a 403 status when lowering authorization.
The Auth mock for check_cookie_auth is not needed here.
Reading back the session after flush either.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a deadlock I think. Any ideas how we could continue to test that
in any conditions?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To make the tests pass even if no SMTP server is defined.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If we are fully logged-in or haven't pass the password phase, don't send
the notice!
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Changing flags to 20 to include the required Staff access for
intranet login.
This changes the http status. The API raises an exception now.
Test plan:
Run t/db_dependent/api/v1/two_factor_auth.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 28786 let librarians enable a Two-factor authentication but force them to use
an application to generate the TOTP token.
This new enhancement add the ability to send an email containing the token to the
patron once it's authenticaed
The new notice template has the code '2FA_OTP_TOKEN'
Test plan:
- Setup the two-factor authentication (you need the config entry and the
syspref ON)
- Enable it for your logged in patron
- Logout
- Login and notice the new link "Send the code by email"
- Click on it and confirm that you received an email with the code
- Use the code to be fully logged in
QA question: Is 400 the correct error code to tell the email has not
been sent?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit allows illview to use an intranet template supplied by the backend, as
per other stages. The template must be named illview.inc
Test plan:
- Apply the patch
- Install FreeForm backend (https://github.com/PTFS-Europe/koha-ill-freeform)
- Create a request
- On the resulting "Manage ILL request" note the display is normal
- Create a new file in the FreeForm backend directory: /intra-includes/illview.inc
with the following content:
[% BLOCK backend_jsinclude %]
<script>(function() { alert("Working!"); })()</script>
[% END %]
- Restart Plack if enabled
- Reload the page
=> TEST: Observe that the alert specified in the template is displayed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This new enhancement add the capability to list the different
identifiers of authors. It is helpful for research publications for
instance.
This patch will add a new "Author identifiers" tab on the detail page
(OPAC) of a bibliographic record, with the list of the authors and their
identifiers.
On the detail page of the authority record, the same identifier list
will be displayed.
Test plan:
Create some authority with
024
$a source
$2 number
$6 link to the source
With the pref turned ON you will be able to see the new information.
Sponsored-by: Orex Digital
Signed-off-by: Orex Digital <info@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Orex Digital
Signed-off-by: Orex Digital <info@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
get_marc_authors actually return authors from 700..712, not the first
author from 200
Sponsored-by: Orex Digital
Signed-off-by: Orex Digital <info@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
also with SearchWithISSNVariations on and off
Signed-off-by: KIT Library Germany <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I forgot to adapt the unit test for the new 'related_debit' key in the
outpur from the summary method.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries have certain item types that can only do in house checkouts via SIP self check machines. In these cases, the items should not be demagnetized since the items cannot leave the library.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/SIP/Message.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We could like to track down when an item has been moved to the
deleteditems table.
Test plan:
Created a new item, delete it
Not that the deleteditems.deleted_on value is set correctly
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(sysprefs SearchWithISBNVariations/SearchWithISSNVariations)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
variations (sysprefs SearchWithISBNVariations/SearchWithISSNVariations)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It would be very useful to have an accountlines method on checkouts objects. In particular it would make fees related to a checkout available from the checkout objects in overdue notices.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Koha/Account/Line.t
3) prove t/db_dependent/Koha/Checkouts.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Moved the installer to pl file
Adjusted capitalization / reply-to
Fix tests by importing needed fuction and adjusting a wrong call
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now, if a library automatically cancels expired waiting holds, a
librarian must still re-checkin an item to trap the next available hold
for that item. It would be better if the next hold was automatically
trapped and the librarians receive an email notification so they can
make any changes to the item if need be ( hold area, hold slip in item,
etc ).
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with one item
4) Place two holds on that record
5) Check in the item and set it to waiting for the first patron
6) Set ReservesMaxPickUpDelay to 1
7) Enable ExpireReservesMaxPickUpDelay
8) Enable ExpireReservesAutoFill
9) Set an email address in ExpireReservesAutoFillEmail
10) Modify the holds waitingdate to be in the past
11) Run misc/cronjobs/holds/cancel_expired_holds.pl
12) Note the hold is now waiting for the next patron
12) Note a waiting hold notification email was sent to that patron
13) Note a hold changed notification email was sent to the library
Signed-off-by: Victoria Faafia <vfaafia29@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a helper method for filtering out cancellation
requested-holds from resultsets, and makes use of it in the OPAC to
filter out those in the current holds tab. Holds history now shows
'Waiting (cancellation requested)' on those.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds that method. Which is covered by new tests.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Holds.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the following helper methods for dealing with hold
cancellation requests to the Koha::Hold class:
* cancellation_requests
* add_cancellation_request
* cancellation_requestable_from_opac
* cancellation_requested_by_owner
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Curbside pickups are not enabled for your location. = library
* Pickup Date/Time = capitalization
* ... it is an holiday = it is a holiday. (multiple)
* Deliver Date/Time = capitalization
* There is no waiting holds for this patron at this location. = There are no... at this library
* No pickup time define for this day. = defined (multiple)
* You don't have waiting holds at this location = library
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We could improve this more and add disable the holiday from the date
picker widget, but it's out of the scope here.
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
A bit of cleaning
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
# Failed test 'No tests run for subtest "searchResults PassItemMarcToXSLT test"'
# at t/Search.t line 208.
Undefined subroutine &C4::Biblio::EmbedItemsInMarcBiblio called at t/Search.t line 194.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Includes:
Bug 29697: (follow-up) Use flag embed_items
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
JD Amended patch:
-# FIXME Special case here
- print "Biblio not found\n,";
+ print "Biblio not found\n";
- my $biblio = Koha::Biblio->find($hostbiblionumber);
+ my $biblio = Koha::Biblios->find($hostbiblionumber);
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a unit test for the newly introduced filter.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As requested by QA, we should match the orgcode.
Adding a few small routines in a Util module.
Test plan:
Run t/Koha/Util/MARC.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Two tests added, one in t/db_dependent/Circulation.t to catch the
initial setting of to_address at enqueue time and a second in
t/db_dependent/Letters.t to catch the correcting at send time.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the unit tests for the change to Koha::Hold::store.
We test for and catch the exception introduced for both the create and
update cases.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This test was missed first time around, branchcode needed adding to all
the calls to AddReserve.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds unit tests for the new effective_not_for_loan_status
which I add to the items api responses in this patchset.
Test plan
1) Run the unit test without applying the next commit, it should fail
2) RUn the test again after applying the next commit, it should pass
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If the value of a SIP field is "0", that evaluates to false, so any calls to maybe_add with a value of "0" will not get added to the SIP response message.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/SIP/Message.t
Signed-off-by: Michal Urban <michalurban177@gmail.com>
JK: Adjust commit title
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Now that we have made item.itype a required field, we need to ensure we
set it for the corresponding selenium test.. this wasn't entirely easy
as the html select is hidden by select2. I had to find the select2 span,
trigger a click event to open it and then find and click an option.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need to create an itemtype for the biblio, then the item form will
have 942$c prefilled by default
STRACE: /usr/share/perl5/Try/Tiny.pm:123 in Selenium::Remote::Driver::catch {...}
/usr/share/perl5/Selenium/Remote/Driver.pm:361 in Try::Tiny::try
(eval 1726):1 in Selenium::Remote::Driver::__ANON__
(eval 1728):2 in Selenium::Remote::Driver::__ANON__
/usr/share/perl5/Selenium/Remote/Driver.pm:953 in Selenium::Remote::Driver::_execute_command
t/db_dependent/selenium/basic_workflow.t:224 in Selenium::Remote::Driver::get_title
Error while executing command: unexpected alert open: Dismissed user prompt dialog: Form not submitted because of the following problem(s)
------------------------------------------------------------------------------------
- 1 mandatory fields empty (highlighted) at /usr/share/perl5/Selenium/Remote/Driver.pm line 411.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It's failing if selenium/patrons_search.t failed before, they are using
the same code and the selenium tests didn't clean correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We want the tests to pass in the case where field is set to visibile in Koha
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Duplicate item is intended to duplicate the visible cataloging fields of an item, however,
currently it is duplicating the complete internal record of the item
To recreate:
1 - find an item in Koha staff client, copy the barcode
2 - Issue this item to a patron
3 - Return to the record
4 - Edit items
5 - Click 'Actions->Duplicate' for the item in question
6 - Save the item
7 - Note in the items table above for that 'Total checkouts' 'Due date'
etc. have not been copied to new item
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adding shelf->cannot_be_transferred with unit tests.
Note: This follow-up actually refers to comment42 on the
preceding report 25498.
Furthermore, we could still improve later on using error code
more effectively (adding codes). Here we concentrate on moving
the checks to module level.
Test plan:
Run t/db_dependent/Virtualshelves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run t/db_dependent/Koha/Patrons.t
Set pref ListOwnershipUponPatronDeletion to transfer.
Set pref ListOwnerDesignated to some valid borrowernumber.
Pick a user with public or shared list, delete from interface.
Pick a user with public or shared list, delete by script. (*)
Verify in both cases that new list owner is the designated one.
(*) Tip: Create another branch. Move the patron to be deleted to that
branch. And delete by script with:
misc/cronjobs/delete_patons.pl -c -v -library YOUR_CODE
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run t/db_dependent/Virtualshelves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Instead of get_lists, I added ->virtualshelves.
I removed the addition of the suffix to the shelf name here; if we
really want that (doubts), we should do it pref based. Removing a
staff member with public lists would result in weird names with
shelf numbers on the OPAC. (Should be very easy to restore.)
Used this opportunity to refactor the patron->delete subtest a bit:
switching to build_object, removing the 'retrieved patrons',
differentiating between staff patron and patron for sharing,
adding a few tests.
Test plan:
Enable transfer ownership. Delete a patron with lists in interface.
Check what happened.
Run t/db_dependent/Koha/Patrons.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need some changes for 28959 changing category to public.
Added the userenv mocking.
Note: A follow-up does a bit more refactoring here. But they
should pass at least now.
Test plan:
Run t/db_dependent/Virtualshelves.t
Run t/db_dependent/Koha/Patrons.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This is a manual reconstruction of an older patch, that git
did not want to apply anymore (sha trouble etc.)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Run prove t/db_dependent/Items/GetAnalyticsCount.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Added tests to ensure that Koha::Holds->get_items_that_can_fill returns items with datecancelled and datearrived
Added test for correct number of items for each call of "get_items_that_fill"
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a unit test for the addition of effective_item_type_id
to the items responses.
Test plan
1) Run the unit test prior to applying the second patch and confirm it
fails
2) Apply the second patch and confirm the unit test now passes
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the use of templates and CGI in ExplodedTerms by using the
Koha::I18N library.
The functionality on the package is too simple, and messing with the
template paths complexity on the tests was too much, given we have a
nice way to have translatable strings at the package level.
This patch does that, and cleans up the test file as well, that required
complex template and CGI mocking to run properly.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/SuggestionEngine_ExplodedTerms.t
=> FAIL: It fails in master
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass
4. Follow the original test plan
=> SUCCESS: Things work
5. Enjoy the rest of the day and forget this ever happened
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds unit tests, as well as changing existing test to use a mock
and read the data as passed in tests, rather than relying on what exists in
the DB
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When placing holds via SIP2, there is no holdability check. This seems very incorrect.
Test Plan:
1) Apply this patch
2) prove -r t/db_dependent/SIP
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a mock for the EdifactLSQ preference so we can
consistently pass when a database is not available.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
