This patch updates teh search customisations in ill-list-table to
properly fetch the existing flatpickr instances for date searches.
To test:
1. Have at least one ILL request on the ILL requests page
2. Open the broser inspector
3. Choose a date on the left hand form
=> FAIL: Errors in the console, search doesn't work
4. Apply this patch
5. Reload
6. Repeat 2-3
=> SUCCESS: No more errors, filtering works!
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 30098 fixed patron search behavior when a later page has only 1 result, but broke the redirect when there is only a single result from search.
To test:
1 - Perform a patron search that returns 41 results, on koha-testing-docker, 'a' works
2 - Go to second page of results, works
3 - On third page you remain in results and are not redirected
4 - Perform a patron search that return only 1 result, name or cardnumber
5 - You get redirected to this patron page
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When you install a plugin that requires a newer Koha version, it reports
this:
<<
Warning: This report was written for a newer version of Koha. Run at your own risk.
>>
It is wrong in a couple ways:
- It is not a report.
- It feels like it dates back to when plugins were only run i.e.
pre-hooks, etc.
This patch proposes a change to reflect this.
To test:
1. Verify the string changes make sense to you
2. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
1 - Define default messaging preferences for a patron category
2 - Go into an existing account and change the patron category to the
one set in step 1.
3 - Confirm that the messaging prefs have been reset to that of the
default patron category
4 - Apply patch
5 - Repeat Step 2, this time you should see a warning asking if you want
to set messaging prefs to the category default
6 - Press OK and save. Confirm that the messaging prefs are now set to
the default for that category
7 - Try it again with an existing account and press Cancel this time.
Notice that there should be no change to the patron messaging prefs.
8 - Try making a new patron and switching the category, you should see
no warning and the message prefs should be proberly set to the
defaults of any category you choose.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes select2 available for ILL backend developers to use on
their templates.
To test:
1. Have a configured backed and an ILL request
2. Open the inspector and load any action on the backend (intranet)
=> FAIL: no select2 asset is transfered from Koha to the browser
3. Apply this patch
4. Reload
=> SUCCESS: There's select2
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To reproduce (paycollect.pl):
1) Prepare or use some existing patron with outstanding fines, go to
the accounting section and open page where you make payment towards all
fines.
2) The error message should have appeared in your log file about
"File not found : default/js/locale_data.js".
3) Apply the patch.
4) Open the edit page again, ensure that the new error massage like
that didn't appear.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To reproduce (memberentry.pl):
1) Head over to the patron details page, press edit button to open the
memberentry.pl page.
2) The error message should have appeared in your log file about
"File not found : default/js/locale_data.js".
3) Apply the patch.
4) Open the edit page again, ensure that the new error massage like
that didn't appear.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the OPAC suggestions form to update the variable
used to pre-select the logged-in user's library.
To test, apply the patch and make sure the "suggestion" preference is
set to "Allow."
- Log in to the OPAC and click "your purchase suggestions" in the
sidebar menu on your summary page.
- Click "New purchase suggestion."
- The selected library should match the logged-in user's home library.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
I change the magnigying glass icon to FA icon in the staff detail view
for 1xx and 7xx of the record that links to the authority records.
The following test plan is for 100 tag only but the patch can be apply
for all 1xx and 7xx tags that can be connect with an authority record.
Test Plan:
1) On the Koha staff page, create a new authority. The type of authority
will be: e.g Personal Name
2) When creating authority, in tab 1 under -HEADING--PERSONAL NAME enter
the personal name term entry element and then save the
new authority e.g. Twain, Mark.
3) In circulation, search the catalog for a random book. Click the title
of the book and you will be taken to the book details.
4) Edit the record and in tab 1 , scroll down the - MAIN ENTRY--
PERSONAL NAME and repeat this tag (the icon next to the title).
5) Edit the Personal name term entry element by clicking
the button on the right of the bar.
6) In the Search main heading ($a only) enter your personal name term
e.g. Twain, Mark.
7) Press search, and then in the table that pops up, click 'choose'.
8) Save your edits and the new personal name term will be in the 'By:'
of the book details.
9) Notice that there is no magnifying glass icon.
10) Apply this patch
11) Notice that there is now a magnifying glass icon next to the
personal name term.
12) Click on the magnifying glass and it will take you directly to the
authorities records
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
I added a magnigying glass icon in the staff detail view for 1xx and 7xx
of the record that links to the authority records.
The following test plan is for 100 tag only but the patch can be apply
for all 1xx and 7xx tags that can be connect with an authority record.
Test Plan:
1) On the Koha staff page, create a new authority. The type of authority
will be: e.g Personal Name
2) When creating authority, in tab 1 under -HEADING--PERSONAL NAME enter
the personal name term entry element and then save the
new authority e.g. Twain, Mark.
3) In circulation, search the catalog for a random book. Click the title
of the book and you will be taken to the book details.
4) Edit the record and in tab 1 , scroll down the - MAIN ENTRY--
PERSONAL NAME and repeat this tag (the icon next to the title).
5) Edit the Personal name term entry element by clicking
the button on the right of the bar.
6) In the Search main heading ($a only) enter your personal name term
e.g. Twain, Mark.
7) Press search, and then in the table that pops up, click 'choose'.
8) Save your edits and the new personal name term will be in the 'By:'
of the book details.
9) Notice that there is no magnifying glass icon.
10) Apply this patch
11) Notice that there is now a magnifying glass icon next to the
personal name term.
12) Click on the magnifying glass and it will take you directly to the
authorities records
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a check for both mandatory and important fields when
validating bibliographic records during cataloguing.
To test:
1. Go to Admin -> Biblio frameworks. View the MARC structure of your
default framework.
2. Search for tag 082. Edit the subfields for this tag.
3. Check the 'important' checkbox for subfield a and Save.
4. Go to add or edit a new biblio record under Cataloguing.
5. Ensure the 082$a field is empty and hit Save.
6. Notice the confirmation pop-up is an unreadable display of HTML.
7. Click Cancel on the pop-up box.
8. Apply the patch and refresh the editor page.
9. Ensure the 082$a field is empty and hit Save.
10. Notice the confirmation pop-up is more helpful this time. Click
Cancel on the pop-up box.
11. Notice the 082$a field is displayed at the top of the page as an
important field that is missing information. Use the 'go to field'
link and confirm this works as expected.
12. Leave 082$a empty and hit Save.
13. This time click OK on the confirmation pop-up. Confirm you are able
to save your record as normal.
Sponsored-by: Education Services Australia SCIS
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To recrate:
Logout
Go to /cgi-bin/koha/opac-search.pl
Click "Log in to your account"
Fill in the login form
Submit
Check the 'form_serialized' cookie's value
=> Without this patch it contain login/password
=> With this patch applied the cookie is not created
Confirm that the "Return to the last advanced search" feature still
works as expected.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
And making reverted ajax message clearer
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- fixes the displays of opac-recalls.pl and opac-recall.pl
- fix the error on Recalls to pull page
- fix JS error preventing Recalled link from showing in checkouts table
- fix cancelling of recall when checking out item
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- removing authnotrequired flag from scripts
- fixing opac buttons
- chmod +x for recalls test files
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
See recalls on Intranet
- old recalls (all inactive recalls)
- recalls queue (all active recalls) - cancel, expire, revert waiting status, multiple cancel, mark overdue
- recalls to pull (available but not yet waiting) - cancel
- recalls awaiting pickup (awaiting pickup, awaiting pickup more than RecallMaxPickUpDelay days) - expire, revert waiting status
- overdue recalls (overdue to be returned) - cancel, multiple cancel
- biblio recalls tab (all active recalls relevant to this bib) - cancel, expire, revert waiting status, mark overdue
- patron recalls tab (all active recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- patron recalls history tab (all recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- log viewer
and the general circulation of recalls
== TEST PLAN FOR RECALLS ==
ADMINISTRATION
1. Apply all patches
2. Run database updates, update schema files and confirm everything applies cleanly
3. Run tests and confirm everything passes:
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Stats.t
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Patron.t
t/db_dependent/XSLT.t
t/db_dependent/Search.t
t/db_dependent/Holds.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/Circulation.t
4. Go to Administration -> system preferences. Find the UseRecalls system preference. It should be DISABLED. Confirm RecallsMaxPickUpDelay is set to 7 by default.
5. Go to Administration -> circulation rules. Confirm there are no recalls circulation rules showing.
6. Test a few circulation flows: checking out, placing a reserve, checking in, fulfilling a reserve, etc. Confirm everything works as normal.
7. Go to Administration -> system preferences. Enable the UseRecalls system preference.
8. Go to Administration -> circulation rules. Set the following rules:
Recalls allowed (count) = 0
Recalls per record (count) = 0
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If any unavailable
Recall due date interval (days) = 3
Recall overdue fine amount = (something different to your normal fine amount)
Recall pickup period (days) = 1
Throughout your testing, try with different combinations of these rules and itemtype / branchcode / categorycode. Also try with null values. Keep the circulation rules open in another tab so you can refer to and update these easily. You should also have at least one other tab open for the staff client, and a third tab open for the OPAC, for ease of testing.
9. Go to your account -> More -> Set permissions. Confirm the recalls permission is checked.
10. Set up a test user with OPAC login details (Borrower A). This could also be your own user, as long as you have OPAC login access.
11. Set up a test record (Biblio A) with at least two items (Item A and Item B) of the same item type (or an item type with the same recall circ rules).
PLACING A RECALL
12. Log in to the OPAC as Borrower A. Do a catalogue search with a term that will return multiple results, including Biblio A.
13. Click on Biblio A.
14. Notice there is a 'Place recall' button on the sidebar menu. Click this button. There will be a message saying that there are no items to recall - this is because all items are available.
15. Check out Item A to another borrower (Borrower B).
16. Refresh the 'Place recall' page. You will still NOT be able to place a recall - this is because Recalls allowed = 0 and Recalls per record = 0.
17. Edit the circulation rules to have the following values:
Recalls allowed (count) = 1
Recalls per record (count) = 1
18. Refresh the 'Place recall' page. You will now see the form to place a recall.
BIBLIO-LEVEL RECALL, NO TRANSFER
19. Place a biblio-level recall.
Pickup location: Branch A, the set branch when you are logged into the staff client
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
20. Confirm the recall is placed successfully. Confirm that the new due date displayed is correctly calculated to be today's date, plus 3 days (taken from the 'recall due date interval' circ rule)
21. In the staff client, look at Borrower B's account, and go to their Notices tab. Confirm they have received a 'Notification to return recalled item' notice.
22. Look at Borrower B's checkouts table. Notice the due date for their checkout has been adjusted, and there is now a note to say that the item was recalled and the due date adjusted.
23. Log in to the OPAC as Borrower B and go to your summary tab. Notice there is a note under their checkout to say the item had been recalled.
24. Log out of the OPAC and log back in as Borrower A.
25. Go to your summary tab. Confirm there is a Recalls tab with a count of 1.
26. Cancel the recall using the button. Confirm it cancels and the Recalls tab disappears.
27. Do a catalogue search with a term that will return multiple results, including Biblio A.
28. When the results load, notice there is a 'Place recall' button next to the 'Place hold' button. Click this 'Place recall' button.
29. Notice you are redirected straight to the form to place a recall.
30. Place a biblio-level recall again, following the steps in Step 19.
31. Go to your recalls history tab. Notice your first cancelled recall shows here.
32. Cancel the recall you just created, using the button. Confirm it cancels and you are redirected to your summary tab.
33. In the staff client, enable the UseCourseReserves system preference.
34. Go to the main menu, click Course Reserves.
35. Add a new course. (You may also have to define an authorised value for DEPARTMENT.)
36. Add Item A as a reserve to this course.
37. View Course Reserves in the OPAC. Click the course you just created.
38. Notice the reserve has a Recall button underneath it's 'Checked out' status. Click this button.
39. Place a biblio-level recall again, following the steps in Step 19.
40. Click the 'Place recall' link in the breadcrumbs.
41. Notice there is a message saying that you have reached the max number of recalls on this record. This is because Recalls allowed = 1 and Recalls per record = 1.
42. Edit the circulation rules to have the following values:
Recalls allowed (count) = 10
Recalls per record (count) = 5
43. Refresh the 'Place recall' page. You will now see the form to place a recall.
44. Create another test record (Biblio B) with at least one item (Item C).
45. Find this record on the OPAC and place a biblio-level recall again, following the steps in Step 19.
46. In the staff client, go to Circulation -> Old recalls. You should be able to see your two cancelled recalls.
47. Go to Circulation -> Recalls queue. Your current recalls should show here.
48. Use the 'Select all' checkbox to select all recalls.
49. Cancel the recalls using the 'Cancel selected recalls' button.
50. Go to the OPAC and place a biblio-level recall on Biblio A again, following the steps in Step 19.
51. In the staff client, check in Item A, which should still be checked out to Borrower B.
52. A box should pop-up asking you to confirm Borrower A's recall. Click ignore.
53. Click the link to go view Biblio A's details in the catalogue.
54. Click the recalls tab. Notice Borrower A's recall is displayed, and shows it is still Requested (has not been confirmed waiting).
55. Check in Item A again. This time, confirm the recall as waiting using the "Confirm recall" button.
56. Go to Borrower A's Notices tab. Confirm there is a notice "Recalled item awaiting pickup".
57. Go to Borrower A's checkouts. Notice there is a recalls tab. Confirm the recall is showing as "Ready for pickup".
58. Click the 'Actions' dropdown. Click the "Revert waiting" button. The page should show a message that the waiting status has been reverted, without reloading.
59. This time, check in Item B. The recall confirmation box should show again, because this a biblio-level recall that any recallable item under Biblio A can fill. Click the "Print slip and confirm" button.
60. Check the slip that is generated. Confirm it contains Borrower A's correct details, and the details of the recall are correct.
61. Go to Circulation -> Recalls awaiting pickup. Confirm the recall is now waiting and shows in this list.
(You could also try this with Item B having a different item type to Item A, and circ rules not allowing Item B's item type to have recalls. When checking in Item A, it should not trigger the recall box).
62. Go to Borrower A's checkouts. Check out Item B.
63. Confirm the checkout is successful and the recall is removed from the Recalls tab.
64. Go to Circulation -> Old recalls. The fulfilled recall should show.
65. Check in Item B.
BIBLIO-LEVEL RECALL, TRANSFER REQUIRED
66. Check out Item A to Borrower B.
67. Log in to the OPAC as Borrower A.
68. Find Biblio A and place a biblio-level recall.
Pickup location: Branch B, a different branch from your logged in branch. This recall will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
69. In the staff client, check in Item A at Branch A. Notice the box that pops up shows that a transfer is required.
70. Click "confirm recall and transfer" and confirm the transfer.
71. Go to your account and click the Recalls tab.
72. Confirm the recall status now shows the item is in transit to Branch B.
73. In the drop-down top-right of your window, select 'Set library'.
74. Set your library to Branch B.
75. Go to Circulation -> Transfers to receive. Notice that the recall is showing here.
76. Click 'Cancel transfer'.
77. Go to Circulation -> Recalls queue
78. Confirm the recall status has been reverted to Requested.
79. Set your library back to Branch A.
80. Check in Item A and trigger the transfer.
81. Set your library back to Branch B.
82. Check in Item A at Branch B.
83. When the 'Recall found' box pops up, click Ignore.
84. Go to Circulation -> Recalls to pull. The recall should show here, with a button to "Cancel recall and return to: Branch A"
85. Click the button to cancel the recall.
86. Repeat Steps 66-70.
87. Check in Item A at Branch B. Confirm the recall as waiting.
88. Check out Item A to Borrower A to fulfill the recall.
89. Set your library back to Branch A and check in Item A.
ITEM-LEVEL RECALL, NO TRANSFER
90. Go to Administration -> circulation rules. Set the following rules:
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If all unavailable
91. Check out Item A to Borrower B.
92. Log in to the OPAC as Borrower A and go to Biblio A.
93. Click the 'Place recall' button. Confirm there is a message that there are no items to recall. This is because On shelf recalls allowed = If all unavailable, and there is still one item (Item B) available.
94. In the staff client, edit Item B to have a withdrawn, item lost or not for loan status.
95. Refresh the 'Place recall' page. Confirm you can now see the form to place a recall.
96. Place an item-level recall.
Pickup location: Branch A.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
97. In the staff client, edit Item B and remove the lost or missing status.
98. Check in Item B. Confirm the recall box does not pop up, because it cannot fill the item-level recall.
99. Check in Item A. Confirm the recall as waiting.
100. Go to Circulation -> Recalls awaiting pickup
101. Expire the recall. Confirm it expires as expected.
ITEM-LEVEL RECALL, TRANSFER REQUIRED
102. Repeat steps 91 to 95.
103. Place an item-level recall.
Pickup location: Branch B, we will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
104. In the staff client, check in Item A. Confirm the recall and trigger the transfer.
105. Set your library to Branch B and check in Item A.
106. Confirm the recall as waiting.
107. Check out Item A to Borrower A and fulfill the recall.
108. Set your library back to Branch A and check in Item A.
CRONJOBS: EXPIRING RECALL
109. Check out Item A to Borrower B.
110. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
111. In your terminal, enter mysql and edit the expiration date of your recall to be before today
UPDATE recalls SET expirationdate = NOW()-2 WHERE recall_id = X;
112. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
113. Go to Borrower A's account and go to the Recalls history tab
114. Confirm the recall has been expired because the current date surpassed the specified expiration date
115. Check out Item A to Borrower B.
116. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
117. In the staff client, check in Item A and confirm the recall as waiting.
118. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW() - interval 5 day WHERE recall_id = X;
119. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
120. Go to Borrower A's account and go to the Recalls history tab
121. Confirm the recall has been expired because the recall had been waiting for more days than the Recall pickup period
122. Go to Administration -> circulation rules. Set the following rules:
Recall pickup period (days) = 0
123. Set the RecallsMaxPickUpDelay system preference = 1.
124. Check out Item A to Borrower B.
125. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
126. In the staff client, check in Item A and confirm the recall as waiting.
127. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW()-2 WHERE recall_id = X;
128. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
129. Go to Borrower A's account and go to the Recalls history tab
130. Confirm the recall has been expired because the recall had been waiting for more days than the RecallsMaxPickUpDelay syspref
CRONJOBS: OVERDUE RECALL
131. Check out Item A to Borrower B
132. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
133. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
134. Run the overdue cronjob from within your shell
perl misc/cronjobs/recall/overdue_recalls.pl
135. Go to Circulation -> Overdue recalls
136. Confirm your recall is showing here now as the recall has been marked Overdue
CIRCULATION
137. Check in Item A.
138. When the recall box pops up, click Ignore.
139. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that another borrower has recalled the item you are trying to check out.
140. Click "No don't check out" and confirm the item isn't checked out and the recall remains.
141. Repeat Step 139.
142. Click "Yes check out" and confirm the item is checked out and the recall remains.
143. When Borrower B's checkout table loads, confirm that you cannot renew or check in the item from the Checkouts table because there is a 'Recalled' link which takes you to the recalls tab for that biblio.
144. Repeat Steps 137-139.
145. Select "Cancel recall" and click "Yes check out" and confirm the item is checked out and the recall has been cancelled.
146. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
147. Check in Item A. Confirm the recall as waiting.
148. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that that another borrower has recalled the item that you are trying to check out.
149. Select "Revert waiting status" and click "Yes check out" and confirm the item is checked out and the recall status has reverted to requested.
OTHER
150. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
151. Go to Borrower A's recalls and click the Actions dropdown.
152. Click "Mark as overdue" and confirm the recall is marked as overdue manually.
153. Go to Tools -> Log Viewer. Check only the Recalls module, and leave all other parameters, and click Submit.
154. Confirm all of the recalls actions that have been made are correctly logged.
Note: recalls messaging preferences are introduced in Bug 23781.
The recall feature is fully documented at: https://wiki.koha-community.org/wiki/Catalyst_IT_Recalls
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- place a biblio-level or item-level recall via the biblio detail page, OPAC search results, or course reserves
- view or cancel your active recalls from 'your summary' recalls tab
- view all active and inactive (and cancel active) recalls from 'your recall history'
- stopped from placing a reserve on an item that the patron has already recalled
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the whitespace for readbility
Moves the Ogranization span to the subfield b, publisher name only
Moves check for last/whitespace to the loop
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
I'm not sure if this is the actual issue, but I found that the patch puts the span with
the class "publisher_name" inside a new span with typeOf="Organization".
In this patch, I removed that new span, to keep it coherent with the previous code.
Also, the MARC 260 subfields are displayed correctly !
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When ordered $a$b$a$b$c in the MARC object, 260 subfields are displayed
$a$a$b$b$c. This goes against the standard.
This patch preserves the order.
0) create a notice with $a$b$a subfields. In that (mixed) order.
1) Go to staff detail page and see the fields displayed as "aab"
2) apply the patch
3) validate the aba display.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When ordered $a$b$a$b$c in the MARC object, 260 subfields are displayed
$a$a$b$b$c. This goes against the standard.
This patch preserves the order.
0) create a notice with $a$b$a subfields. In that (mixed) order.
1) Go to detail page and see the fields displayed as "aab"
2) apply the patch
3) validate the aba display.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds additional CSS to better cover various states of buttons
in the OPAC.
To test, apply the patch and rebuild the OPAC CSS:
https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client
- In the OPAC, test various green buttons in varous states: default,
hover, and active (the appearance when the button is clicked but
before the mouse button is released).
- The button should be styled in various shades of green in all cases.
- Test a disabled button by performing a catalog search.
- On the results page, before any checkboxes are checked, the "Save"
button should look correct.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To prevent a redirect when we click on a page with only 1 result
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This removes the need to handle single and multiple cases separately,
thus removing bunch if-else cases and simplifying our code. This
coding style is also in line with our other .pl scripts.
To test:
1) Make sure placing a hold still works from the following pages:
/cgi-bin/koha/catalogue/detail.pl?biblionumber=XXX
/cgi-bin/koha/catalogue/search.pl?q=a
/cgi-bin/koha/virtualshelves/shelves.pl?op=view&shelfnumber=XXXX
/cgi-bin/koha/clubs/clubs.pl (create a new club and add a patron
there and through the clubs.pl create a hold to a bib)
Signed-off-by: Hayley Pelham <hayleypelham@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch simply adds a check that we are oin the first page (starting at result 0)
before redirecting to a isngle patron
To test:
1 - Perform a patron search that returns 41 results, on Koha testing docker, 'a' works
2 - Go to second page of results, works
3 - Go to third page of results, redirected to the patron
4 - Apply patch
5 - Repeat search and paging
6 - On third page you remian in results and are not redirected to patron
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Problem arises after applying bugfix 27526 and 28445: with
IndependentBranches on, a librarian without superlibrarian privileges,
can edit (and potentially delete) every item (i.e. also from a foreign
branch). This is because can_be_edited calculation is buggy (in two spots).
Test plan:
1. Have (at least) two branches defined.
2. Have IndependentBranches set.
3. Have a biblio record with items belonging to different branches.
4. Be a librarian without superlibrarian rights, with editcatalogue
and tool permissions set.
Scenario A (Edit items):
1. Go to Edit -> Edit items view (cataloguing/additems.pl).
2. You will be able to edit every item, also ones not from the branch
you are from (cf. the button 'Actions').
3. Apply the patch.
4. Repeat 1.
5. You should be able to edit only the items from your branch.
Scenario B (Edit items in batch):
1. From Normal view go to Edit -> Edit items in batch.
2. You will be able to batch edit every item, also ones not from the branch
you are from.
3. Apply the patch.
4. Repeat 1.
5. You should be able to edit only the items from your branch (and
see 'Cannot edit' for others.
Scenario C (Delete items in batch):
1. From Normal view go to Edit -> Delete items in batch.
2. You will not see the string 'Cannot delete' and only by chance
will not be able to activate the checkboxes next to foreign items.
3. Apply the patch.
4. Repeat 1.
5. You should be able to delete only the items from your branch (and
see 'Cannot delete' for others.
Scenario D and E:
Analogous steps can be executed from Tools -> Batch item modification
and Tools -> Batch item deletion
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Strings must not contain html tags, we should use KohaSpan instead.
Test plan:
Apply the patch, update translation for a given language, edit XX-YY-staff-prog.po
Notice that the string is now
"The %s preference is not set, don't forget to enable it for rules to take effect."
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This problem appears (at least) on the cities list view:
If you pass a filter in the "Search cities" filter in the header, it
won't be taken into account and all the cities will be displayed.
There are two problems. First we are passing an "empty" q=[] in the
body, the filter from the header is passed as URL parameters. We should
not need to pass the q if it's empty.
Then the main problem is coming from a bug in
Koha::REST::Plugin::Query but I didn't manage to track it down. If we
have two 2 passed, only the second one will be used. We are certainly
using a hash somewhere we should not.
This patch is fixing the bug but not on the correct side. A follow-up
bug should take care of the main problem at lower level.
Test plan:
Hit /admin/cities.pl
Create some cities
Use the filter in the header of the page and submit
=> Without this patch all cities are retrieved
=> With this patch applied only the relevant cities are displayed.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
1. Apply patch
2. Make some holds, have some item level and some bib level
3. On request.tt notice a new column on the holds_table called 'Print hold/transfer slip'
4. Make sure the button works and takes you to the proper hold/transfer slip
5. Make sure it works well with both item/bib level holds
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
