The previous patch did not account for the change
in the number of indexes, and thus caused one
of the tests to fail.
To test:
[1] Verify that prove -v t/QueryParser.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The return from GetReservesFromBiblionumber contains an unnecessary
extra variable. In scalar context an array returns its element count.
Maintaining a separate count can lead to unforeseen bugs
and imposes ugly constructions on the subroutine's users.
Remove the useless count variable from the return
This patch also changes the parameters: now the routine takes a hashref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Placed biblio holds, future holds and item holds. Works as expected.
Tested Holds.t and Reserves.t. Pass.
Tested /cgi-bin/koha/ilsdi.pl?service=GetRecords&id=999 with two holds on
one item. Fine.
C4/SIP/ILS/Item.pm: Looked for "whatever" and "arrayref" and could not find
them anymore. Looks good.
Handled a few unneeded calls in QA follow-up.
Left only one point to-do for serials/routing-preview.pl. See Bugzilla.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The set of related ISBNs for the first Harry Potter book returned
by OCLC's XISBN service has changed recently, so this patch adjusts
the test to match.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes an issue where chosing 'None' as the sort order
for an authority search would result in zero hits if QueryParser is
eanbled.
This patch also adds some additional test cases.
To test:
[1] Enable QueryParser.
[2] Perform an authority search in the staff interface that
uses 'Heading A-Z' as the sort order and returns hits.
[3] Run the same search, but with the sort order set to 'None'.
No hits are returned.
[4] Apply the patch.
[5] Do step 3 again. This time, hits should be returned.
[6] Verify that prove -v t/db_dependent/Search.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch duplicates the SearchAuthority tests, with QP enabled.
Searching shouldn't be affected by QP. Instructions for manually
reproducing this can be read in the first comment for the bug entry.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
test plan:
prove t/db_dependent/Acquisition/TransferOrder.t should fail before the
patch and success after applying it.
Signed-off-by: Sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds three tests to Reserves.t for GetReservesFromItemnumber.
We test if this routine does not return a future next available hold,
a future item level hold. And if it does return a future wait (that is:
a confirmed future hold, using ConfirmFutureHolds).
Note that Holds.t does also contains some basic tests for this routine,
but the additional tests seem to better located in the direct context of
tests for bug 9761 for ConfirmFutureHolds.
Test plan:
Run both t/db_dependent/Holds.t and t/db_dependent/Reserves.t.
Verify if both tests do not fail.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
1. Run prove t/Category.t
2. Apply patch
3. Run prove t/db_dependent/Category.t - Notice 2 tests were run
Signed-off-by: daniel <daniel.barker.nz@gmail.com>
Made the requested changes.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test
1. run prove t/Installer_PerlModules.t
2. apply patch
3. run prove t/Installer_PerlModules.t
notices more tests are run
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Adds another passing test.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests pass :)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This test requires a valid Koha context, so this patch
moves it to t/db_dependent.
To test:
[1] Verify that prove -v t/db_dependent/Installer.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates some of the tests to more clearly
check that fields in the C4::Installer object are getting
set correctly from the context.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Tests succeed, but cause many warnings:
prove t/Installer.t
t/Installer.t .. 1/9 "my" variable $self masks earlier declaration in
same scope at t/Installer.t line 19.
"my" variable $self masks earlier declaration in same scope at
t/Installer.t line 20.
"my" variable $self masks earlier declaration in same scope at
t/Installer.t line 21.
"my" variable $self masks earlier declaration in same scope at
t/Installer.t line 22.
"my" variable $self masks earlier declaration in same scope at
t/Installer.t line 23.
Odd number of elements in anonymous hash at t/Installer.t line 17.
Use of uninitialized value within @ARGV in anonymous hash ({}) at
t/Installer.t line 17.
The patch remedies that.
Test Plan:
1) Apply first patch on this bug
2) Run "prove t/Installer.t"
3) Note the warnings
4) Apply this patch
5) Repeat step 2
6) Note the warnings are gone
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test
1. Run prove t/Installer.t
2. Apply patch
3. Run prove t/Installer.t
Notice more tests are run
Signed-off-by: Francesca Moore <francescalamoore@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass :)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes sure all scenarios are covered for SetUTF8Flag.
Signed-off-by: Emma Heath <emmaheath.student@wegc.school.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test
1. run prove t/Charset.t
2. apply patch
3. run prove t/Charset.t
notice more tests are run
Signed-off-by: Tom Houlker <thomas.houlker@hibs.school.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests pass!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes C4::Barcodes::PrinterConfig, which is
used by no other code in the database.
Signed-off-by: Emma Heath <emmaheath.student@wegc.school.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No instances of PrinterConfig found in the codebase
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Couldn't find any reference to those files in Koha.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch moves t/Languages.t to t/db_dependent/Languages.t,
as the new get for getAllLanguages() works best if there's
a database available.
To test:
[1] Run prove -v t/db_dependent/Languages.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test
1. Run prove t/Languages.t
2. Apply patch
2. Run prove t/Languages.t again and notice: More tests are run
Signed-off-by: alex_h <dhorsman@xtra.co.nz>
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Adds another passing test. I took th liberty of moving the test plan
from the subject to the commit message. :-)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests pass :)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
to test
1. run prove t/Print.t
2. apply patch
3. run prove t/Print.t
Notice more tests are done
Signed-off-by: Roman Amor <romanwilton@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
UT passes, also passes koha-qa.pl
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests pass :)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This avoids turning t/Log.t into one that requires a valid
session context.
To test:
[1] Run the following and verify that the test passes.
unset KOHA_CONF
prove -v t/Log.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
1. run prove t/Log.t
Notice 1 test is run
2. apply patch
3. run prove t/Log.t
Notice 3 tests are run
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
I think there might be a typo in "Testing git log status". Should
this read "Testing get log status"? (Noticed while looking at the
code/running perl t/Log.t.)
In any case, thanks for the patch. Looks good!
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Fixed typo, thanks David
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described:
1..3
ok 1 - use C4::Log;
ok 2 - Testing GetLogStatus
ok 3 - Testing hash is non empty
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch restores the ability to request a DBI database handle
or a DBIx::Class schema object connected to a PostgreSQL database.
To address the concerns raised in bug 7188, only "mysql" and "Pg"
are recognized as valid DB schemes. If anything else is passed
to C4::Context::db_scheme2dbi or set as the db_scheme in the Koha
configuration file, the DBD driver to load is assumed to be "mysql".
Note that this patch drops any pretense of Oracle support.
To test:
[1] Apply patch, and verify that the database-dependent tests
pass when run against a MySQL Koha database.
[2] To test against PostgreSQL, create a Pg database and
edit koha-conf.xml to set db_scheme to Pg (and adjust
the other DB connection parameters appropriately). The
following tests should pass, at minimum:
t/Context.t
t/db_dependent/Koha_Database.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, some additional notes:
- Installed Postgres following
http://wiki.ubuntuusers.de/PostgreSQL
- Created a database user koha
- Created a database koha
- Changed the koha-conf.xml file
<db_scheme>Pg</db_scheme>
<database>koha</database>
<hostname>localhost</hostname>
<port>5432</port>
<user>koha</user>
<pass>xxxx</pass>
- Installed libdbd-pg-perl
- Ran the web installer until step 3 everything looked ok
Step 3 complains:
Password for user koha: psql: fe_sendauth: no password supplied
- Both t/Context.t and t/db_dependent/Koha_Database.t pass
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Remove unit tests for ParseSearchHistoryCookie, which doesn't exist
anymore
- Add unit tests for ParseSearchHistorySession and
SetSearchHistorySession
- Remove/Modify comments about search history cookie
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Tests fixed and moved, and comments tidied up
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test
run prove t/Koha_Template_Plugin_Cache.t
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
By adding the relevant environment variables to the script the generated
koha-conf.xml file for the unit tests is correct now.
Test plan:
- Verify that tests pass now:
$ prove -v t/db_dependent/Search.t 2> /dev/null | grep 11499
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes unit test, koha-qa.pl
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
t/db_dependent/Search.t creates its own temporary koha-conf.xml and
related files, and it fails to properly set indexing modes for
bibliographic and authority records.
This patch adds regression tests for that.
To test:
$ prove -v t/db_dependent/Search.t 2> /dev/null | grep 11499
The test should fail unless the main page is applied.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This UT got wrapped inside a transaction with autocommit=0 but
the rollback call was inadvertedly ommited. Adding it.
[RM note: an explicit rollback is not required, as the
transaction will roll back automatically at the end of
the DB session. Nonetheless, it hurts nothing to have
it be explicit.]
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Tests for C4::Output::JSONStream made the invalid assumption
that the hash keys of the modules internal structure
will always be returned in the same sequence.
A hash is an unordered structure. as of perl 5.18
this has beem reinforced by random seeding of the
hashing function. See the info in perldelta and
the doc for JSON.
This patch changes the tests to be sequence-neutral
where the previous test was testing that a new element
was added and an existing one was untouched these have
been separated into individual tests.
Some typos in the messages have been corrected
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Test Plan
1/ Run t/Output_JSONStream.t , 8 tests should pass (or perhaps fail,
but inconsistently under perl 5.18 or greater)
2/ Apply patch
3/ Run t/Output_JSONStream.t 10 tests should pass now
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch clears the subscription table so tests pass correctly if
there happens to have been a subscription with an end date before
2013-08-01.
To test
1/ Add a subscription in the serials module, with an end date before
2013-08-01
2/ run prove -v t/db_dependent/Bookseller.t
Notice tests 22 and 23 fail
3/ Apply patch
4/ run test again
5/ Notice tests succeed
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests now clean the subscription table before running
the tests, so that the will always pass.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch corrects a typo that broken ModReserveFill(). This
patch also adds a unit test that (via two levels of indirection)
exercises ModReserveFill().
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes Circulation_transfers.t no longer be sensitive to
the exact time it runs, avoiding spurious test failures due
to datesent being a second off between the creation of the test
transfer and the comparison.
To test:
[1] To simulate the failure, add a "sleep(2);" after the
"#Test GetTransfers" comment and run
prove -v t/db_dependent/Circulation_transfers.t
[2] Remove the sleep and apply the patch.
[3] Verify that prove -v t/db_dependent/Circulation_transfers.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In various places, deleting a hold request did not trigger recalculating
the priority of the other holds on the bib:
To reproduce the bug:
- select or create 2 users U1 and U2
- select or create an holdable item
- place on hold for both U1 and U2. U1 has priority 1 and U2 has
priority 2.
- delete the hold for U1
- go on circ/circulation.pl?borrowernumber=XXXX for U2 (or in the DB
directly) and verify the priority has not been set to 1
The issue is repeatable (at least) on these 2 pages:
* circ/circulation.pl?borrowernumber=XXXX (tab 'Holds', select "yes"
in the dropdown list and submit the form)
* reserve/request.pl?biblionumber=XXXX (click on the red cross)
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran my tests:
Preparations:
- Create holds for different patrons on a record:
* 1st - title level hold
* 2nd - item level hold
* 3rd - title level hold
* 4th - title level hold
- AllowOnShelfHolds = On/Allow (items were not checked out)
Tests:
Deleted holds from various pages, confirming bugs first,
then testing with applied patches. Reloading database
after each test.
1) Cancel holds from OPAC patron account
/cgi-bin/koha/opac-user.pl#opac-user-holds
- Cancel 4th - ok, before and after applying the patch
- Cancel 2nd - ok, after applying the patch
2) Cancel hold from holds tab on staff detail page
/cgi-bin/koha/reserve/request.pl?biblionumber=7
a) Setting priority to 'del', submitting with 'Update holds'
- Cancel first (1st) - ok, before and after
- Cancel hold in the middle (was 3rd) - ok, before and after
- Cancel last (was 4th) -ok, before and after
b) Using red X
- Repeating tests from a) - before the patch is applied holds
get totally 'out of order' - after applying the patch, it works
correctly
Additional tests done on this page:
- Change priority using up, down, to top, to bottom icons
- Change priority with 'toggle to lowest'
3) Cancel hold from the patron's account
a) Check out tab - Delete? Yes, 'Cancel marked holds'
/cgi-bin/koha/circ/circulation.pl?borrowernumber=X
- Cancel first (1st) - ok, after applying the patch
- Cancel hold in the middle (was 3rd) - ok, after applying the patch
- Cancel last (was 4th) - ok, after applying the patch
b) Details tab - Delete? yes, 'Cancel marked holds'
/cgi-bin/koha/members/moremember.pl?borrowernumber=X
- Cancel first (1st) - ok, after applying the patch
- Cancel hold in the middle (was 3rd) - ok, after applying the patch
- Cancel last (was 4th) - ok, after applying the patch
Without the patch, holds priorities get out of order.
Additional tests done:
- Check in one item to trigger first hold
- Check in one item to trigger second hold
- Check out first item
Priorities are kept while the item is waiting, when it's
checked out, priorities of remaining holds get reset correctly.
Conclusion:
Big improvement, no regressions found.
Passes all tests in t, xt and QA script.
Also: t/db_dependent/Holds.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Reserves.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a regression test for using the MARC21
264 field in the Bibtex export.
To test:
[1] Verify that prove -v t/db_dependent/Record.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a regression test for verifying that queued
SMS messages meant for patrons who have no SMS alert number
set are marked as failed after the first attempt to send them.
To test:
[1] Run prove -v t/db_dependent/Letters.t. The fourth
test should.
[2] Apply the main patch and run t/db_dependent/Letters.t
again. This time, all tests should pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
That's it. A guide box cannot be created if invalid data is passed.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, includes new unit tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Note that I modify the return value. Before this patch, it returned an
empty string or 1. Now it returns 0 or 1.
Test plan:
- same as the original patch
- verify that unit tests pass:
prove t/Context.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, including new tests.
Checked the code and tested superlibrarian behaviour in some places:
moremember.pl:
With IndyBranches only superlibrarian can delete borrowers from
other branches. Accessing the borrower with a direct link.
OK
C4/Members.pm
With IndyBranches only superlibrarian can search for borrowres
from other branches.
OK
tools/holidays.pl
With IndyBranches only superlibrarian can edit holidays for other
branches.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch implements a regression test for verifying that
duplicate hold notifications aren't sent if ModReserveAffect() is
called repeatedly (as might happen if a circ operator accidentally
checks in an item and confirms its hold more than once).
Note that the test depends on the fact that _koha_notify_reserve()
defaults to sending a HOLD_PRINT letter if the borrower has not
specified an email or SMS hold notification.
To test:
[1] Run prove -v t/db_dependent/Reserves.t
[2] The 'patron not notified a second time (bug 11445)' test
should fail.
[3] Apply the main patch and run prove -v t/db_dependent/Reserves.t
again. This time all tests should pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The tests should be executed into a transaction and the SimpleSearch
routine correctly mocked.
Test plan:
Verify that prove t/db_dependent/XISBN.t returns green.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A unit test fails in t/db_dependent/XISBN.t, the get_xisbn routine, if
ThingISBN is enabled, returns the 3rd biblionumber, not the second one.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds unit tests for two parts of DelItemCheck: checking
if the item is on loan, and checking if it is waiting on the hold
shelf.
To test:
[1] Verify that prove -v t/db_dependent/Circulation/IsItemIssued.t
is successful.
[2] Verify that prove -v t/db_dependent/Reserves.t is *not*
successful -- as it turns out, there was a latent bug where items
waiting on the hold shelf or in transit to fill a hold could still
be deleted without any warning.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It is not necessary to process the case where the number of quotes
is just one, as int(rand(1)) will always produce 0, which is a valid
offset.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds new tests based on the db_dependent tests in
t/db_dependent/Koha.t for GetDailyQuote().
Tests run on an empty database and don't require Test::Deep.
Tests will fail before applying the patch for 11297, but will
pass after applying the patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Under certain circumstances, namely where QueryParser is off,
QueryWeightFields is on, and QueryFuzzy and QueryAutoTruncate are
off, a search with a double-quote embedded in it can fail: for
example
web application
would return results where
web "application
does not.
This patch adds an automated regression test.
To test:
[1] Apply this patch and run prove -v t/db_dependent/Search.t;
two tests should fail.
[2] After applying the main patch that fixes the bug, the
prove -v t/db_dependent/Search.t should succeed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Looking at the TT plugin directory I notice we have some plugins that
seem to do the same thing:
KohaBranchName.pm
Branches.pm
This patch drops KohaBranchName in favor of Branches
Test Plan:
1) Apply this patch
2) View a basket group, note the branch name is displayed
3) View a subscription's details, note the branch name is displayed
4) View suggestions, note the branch names are displayed
5) Return an item that needs transfered, note the branch name is displayed
6) Run 'prove t/db_dependent/Koha_template_plugin_Branches.t'
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested with a branch name with umlauts.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch ensures that the package-level cache is updated
when add_holiday() is used. Note that except for the test
case added by this patch, there doesn't seem to be anything
that actually calls ->add_holiday(); it may be better to remove it.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
