It's been a while since this bug is around. This normalization is only
used for UNIMARC and yields a fatal error when those variables are set
on (at least) MARC21 setups.
Regards
To+
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: update comment
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When using fast cataloguing to create a biblio and item on the fly, workflow looses datas when a duplicate is detected.
This comes from the use of a mix of circborrowernumber and borrowernumber in forms.
This patch corrects by using always circborrowernumber in fast cataloguing workflow.
Also adds html and uri escape for barecode where necessery.
Test plan :
With duplicate :
- Go to a borrower circulation page
- Enter a non existing barcode
- Enter a due date
- Click on "Check Out"
=> a message says the barcode was not found
- Click on "Fast cataloguing"
=> The biblio edition page appears with fast cataloguing framework
- Fill mandatory fields by using an existing ISBN
- Click on "Save"
=> a yes/no message says "Duplicate record suspected"
(Choosing yes will brake fast caloguing workflow, in this case librarian should create an item and checkout again)
- Click on "No"
=> The item edition page appears with barcode already filled
- Fill mandatory datas
- Click on "Add item"
=> Borrower circulation page appears again, check that item has been checked out with the specified due date
You may test without duplicate
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested following the plan and by fast cataloging a non-duplicate.
All works as expected.
Signed-off-by: koha.aixmarseille <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In a librairies network, we would like to declare specific values just
for one (or more) library.
Here we implement the ability to associate categories, patron attributes
types and/or authorised_values with librairies (branches).
This patch adds 3 new association tables:
- categories_branches ( association table between categories and branches )
- authorised_values_branches ( association table between
authorised_values and branches )
- borrower_attribute_types_branches (association table between
borrower_attribute_types and branches )
Plan test:
- Create (or modify) categories, patron attributes and
authorised_values and link it with one (or more) library.
- Set one of these librairies
- Go to one of the multiple pages where this specific value must be displayed
and check that it does appear.
- Set a library not concerned.
- Check on the same pages this value is doest not appear.
A page list:
cataloguing/addbiblio.pl
cataloguing/additems.pl
members/members-home.pl
members/memberentry.pl
acqui/neworderempty.pl
tools/modborrowers.pl
and others :)
Please say me if filters don't work on some pages.
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
A logic bug in the original code adding DefaultClassificationSource
caused the default not to be used (the last used value was used instead)
The bug was fixed in additem by bug 2398 but addbiblio's use
of the code was not fixed.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The HTML for authority search results was previously generated in
C4::AuthoritiesMarc::BuildSummary, which meant that it couldn't be
translated. This patch moves the HTML generation into the templates
by introducing a new authorities-search-results.inc include file for
both the OPAC and the Intranet which contains a Template::Toolkit BLOCK
for rendering the authority results. Fixes the authority autocomplete
by removing the untranslatable strings, and returning only data from
the database.
To test:
1. Apply patch.
2. Test authority searching in the authority module in the staff client
3. Test authority searching in the authority control plugin in the
cataloguing module (and the plugin for UNIMARC field 210$c, if you
can figure out how)
4. Test authority searching in the OPAC
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with MARC21 data.
1) Applies cleanly on current HEAD.
2) Authority search in staff
Patch works wonderfully, only some small notes found while testing that have
not been changed by this patch:
ENH note: Search terms show up nowhere. So if I want to change the sorting, I have to
repeat typing in my search term. Even if the form does not keep the term, it
should be visible somewhere on the screen what I searched for.
ENH note: The pagination on top and at the bottom of the result list are formatted
differently. Maybe some missing CSS?
ENH note: Also the authority type is not shown at all in the result list.
3) Cataloguing and authority plugins
The autocomplete function works nicely.
ENH note: There is only one small enhancement
I could imagine. If I start my search from 100 it will limit the search to
'persons' but the autocomplete will also suggest other authorities. It would
be a bit cleaner, if the autocomplete could limit by the appropriate authority
type too. Very nice feature.
Plugins overall work nicely. Created links include the authority numbers and work
correctly.
4) Authority search in OPAC
Works nicely. Display is consistent, but translatability greatly improved.
ENH note: In staff we use 'Details' in OPAC we use 'View full heading' - I wonder
if maybe 'details' would be better understandable for users?
Note: Code reveals a system preference 'AuthDisplayHierarchy' that is
not available in the system preference editor. I talked to Jared and he
will work on this feature later on. For now it's no regression, as the
preference has never been visible.
1) Removes unused subroutine get_host_control_num
2) Fixes small mistake, correct subfield for ISBN 020 is z
3) Checks system preference for correct marcflavour instead of
assuming MARC21
4) Fixes MARC21 to not use author(), because it would also add
fields like $w and $0 to 773$a
5) Fixes MARC21 to not use title(), but 245$a, because it would
also add too many subfields.
6) Adds definitions for UNIMARC and includes NORMARC
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works properly with all supported MARC flavours.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Simplifies the adding of analytical records and ensures that
the data populating the 773 tag is correct. From the host record
add child record is selected and create bib is entered to generate
a new record with host item tag populated from the parent
Caveat: currently prepare_host_field only returns a field for
MARC21. Values for UNIMARC and NORMARC can easily be added but
should be done by someone familar with those formats
and conventions
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
To test:
- create a new record
--> if you enter a value in 001 anaytics will use that in $w for linking later
--> if you set 000/LDR 19 - Multipart resource record level to 'a' there will
be a link from the parent record to the child record later
- save your record and go to the staff detail page
- in toolbar select 'New' > 'New child record'
- check field 773, 245 and 001 from the parent record should have been copied there
- check links between child and parent in staff
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts in all 3 files.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works properly for MARC21, and follow-up adds support for NORMARC and UNIMARC.
Squashed patch incorporating all previous patches (there is no functional
change compared to the previous version of this patch, this patch merely
squashes the original patch and follow-up, and rebases on latest master).
=== TL;DR VERSION ===
*** Installation ***
1. Run installer/data/mysql/atomicupdate/bug_7284_authority_linking_pt1
and installer/data/mysql/atomicupdate/bug_7284_authority_linking_pt2
2. Make sure you copy the following files from kohaclone to koha-dev:
etc/zeradb/authorities/etc/bib1.att,
etc/zebradb/marc_defs/marc21/authorities/authority-koha-indexdefs.xml,
etc/zebradb/marc_defs/marc21/authorities/authority-zebra-indexdefs.xsl,
etc/zebradb/marc_defs/marc21/authorities/koha-indexdefs-to-zebra.xsl, and
etc/zebradb/marc_defs/unimarc/authorities/record.abs
3. Run misc/migration_tools/rebuild_zebra.pl -a -r
*** New sysprefs ***
* AutoCreateAuthorities
* CatalogModuleRelink
* LinkerModule
* LinkerOptions
* LinkerRelink
* LinkerKeepStale
*** Important notes ***
You must have rebuild_zebra processing the zebraqueue for bibs when testing this
patch.
=== DESCRIPTION ===
*** Cataloging module ***
* Added an additional box to the authority finder plugin for "Heading match,"
which consults not just the main entry but also See-from and See-also-from
headings.
* With this patch, the automatic authority linking will actually work properly
in the cataloging module. As Owen pointed out while testing the patch,
though, longtime users of Koha will not be expecting that. In keeping with
the principles of least surprise and maximum configurability, a new syspref,
CatalogModuleRelink makes it possible to disable authority relinking in the
cataloging module only (i.e. leaving it enabled for future runs of
link_bibs_to_authorities.pl). Note that though the default behavior matches
the current behavior of Koha, it does not match the intended behavior.
Libraries that want the intended behavior rather than the current behavior
will need to adjust the CatalogModuleRelink syspref.
*** misc/link_bibs_to_authorities.pl ***
Added the following options to the misc/link_bibs_to_authorities.pl script:
--auth-limit Only process those headings that match the authorities
matching the user-specified WHERE clause.
--bib-limit Only process those bib records that match the
user-specified WHERE clause.
--commit Commit the results to the database after every N records
are processed.
--link-report Display a report of all the headings that were processed.
Converted misc/link_bibs_to_authorities.pl to use POD.
Added a detailed report of headings that linked, did not link, and linked
in a "fuzzy" fashion (the exact semantics of fuzzy are up to the individual
linker modules) during the run.
*** C4::Linker ***
Implemented new C4::Linker functionality to make it possible to easily add
custom authority linker algorithms. Currently available linker options are:
* Default: retains the current behavior of only creating links when there is
an exact match to one and only one authority record; if the 'broader_headings'
option is enabled, it will try to link to headings to authority records for
broader headings by removing subfields from the end of the heading (NOTE:
test the results before enabling broader_headings in a production system
because its usefulness is very much dependent on individual sites' authority
files)
* First Match: based on Default, creates a link to the *first* authority
record that matches a given heading, even if there is more than one
authority record that matches
* Last Match: based on Default, creates a link to the *last* authority
record that matches a given heading, even if there is more than one record
that matches
The API for linker modules is very simple. All modules should implement the
following two functions:
<get_link ($field)> - return the authid for the authority that should be
linked to the provided MARC::Field object, and a boolean to indicate whether
the match is "fuzzy" (the semantics of "fuzzy" are up to the individual plugin).
In order to handle authority limits, get_link should always end with:
return $self->SUPER::_handle_auth_limit($authid), $fuzzy;
<flip_heading ($field)> - return a MARC::Field object with the heading flipped
to the preferred form. At present this routine is not used, and can be a stub.
Made the linking functionality use the SearchAuthorities in C4::AuthoritiesMarc
rather than SimpleSearch in C4::Search. Once C4::Search has been refactored,
SearchAuthorities should be rewritten to simply call into C4::Search. However,
at this time C4::Search cannot handle authority searching. Also fixed numerous
performance issues in SearchAuthorities and the Linker script:
* Correctly destroy ZOOM recordsets in SearchAuthorities when finished. If left
undestroyed, efficiency appears to approach O(log n^n)
* Add an optional $skipmetadata flag to SearchAuthorities that can be used to
avoid additional calls into Zebra when all that is wanted are authority
records and not statistics about their use
*** New sysprefs ***
* AutoCreateAuthorities - When this and BiblioAddsAuthorities are both turned
on, automatically create authority records for headings that don't have
any authority link when cataloging. When BiblioAddsAuthorities is on and
AutoCreateAuthorities is turned off, do not automatically generate authority
records, but allow the user to enter headings that don't match an existing
authority. When BiblioAddsAuthorities is off, this has no effect.
* CatalogModuleRelink - when turned on, the automatic linker will relink
headings when a record is saved in the cataloging module when LinkerRelink
is turned on, even if the headings were manually linked to a different
authority by the cataloger. When turned off (the default), the automatic
linker will not relink any headings that have already been linked when a
record is saved.
* LinkerModule - Chooses which linker module to use for matching headings
(current options are as described above in the section on linker options:
"Default," "FirstMatch," and "LastMatch")
* LinkerOptions - A pipe-separated list of options to set for the authority
linker (at the moment, the only option available is "broader_headings," which
is described below)
* LinkerRelink - When turned on, the linker will confirm the links for headings
that have previously been linked to an authority record when it runs. When
turned off, any heading with an existing link will be ignored.
* LinkerKeepStale - When turned on, the linker will never *delete* a link to an
authority record, though, depending on the value of LinkerRelink, it may
change the link.
*** Other changes ***
* Cleaned up authorities code by removing unused functions and adding
unimplemented functions and added some unit tests.
* This patch also modifies the authority indexing to remove trailing punctuation
from Match indexes.
* Replace the old BiblioAddAuthorities subroutines with calls into the new
C4::Linker routines.
* Add a simple implementation for C4::Heading::UNIMARC. (With thanks to F.
Demians, 2011.01.09) Correct C4::Heading::UNIMARC class loading. Create
biblio tag to authority types data structure at initialization rather than
querying DB.
* Ran perltidy on all changed code.
*** Linker Options ***
Enter "broader_headings" in LinkerOptions. With this option, the linker will
try to match the following heading as follows:
=600 10$aCamins-Esakov, Jared$xCoin collections$vCatalogs$vEarly works to
1800.
First: Camins-Esakov, Jared--Coin collections--Catalogs--Early works to 1800
Next: Camins-Esakov, Jared--Coin collections--Catalogs
Next: Camins-Esakov, Jared--Coin collections
Next: Camins-Esakov, Jared (matches! if a previous attempt had matched, it
would not have tried this)
This is probably relevant only to MARC21 and LCSH, but could potentially be of
great use to libraries that make heavy use of floating subdivisions.
=== TESTING PLAN ===
Note: all of these tests require that you have some authority records,
preferably for headings that actually appear in your bibliographic data. At
least one authority record must contain a "see from" reference (remember which
one contains this, as you'll need it for some of the tests). The number shown
in the "Used in" column in the authority module is populated using Zebra
searches of the bibliographic database, so you *must* have
rebuild_zebra.pl -b -z [-x] running in cron, or manually run it after running
the linker.
*** Testing the Heading match in the cataloging plugin ***
1. Create a new record, and open the cataloging plugin for an
authority-controlled field.
2. Search for an authority by entering the "see from" term in the Heading Match
box
3. Confirm that the appropriate heading shows up
4. Search for an authority by entering the preferred heading into the Main
entry or Main entry ($a only) box (i.e., repeat the procedure you usually
use for cataloging, whatever that may be)
5. Confirm that the appropriate heading shows up
*** Testing the cataloging interface ***
6. Turn off BiblioAddsAuthorities
7. Confirm that you cannot enter text directly in an authority-controlled field
8. Confirm that if you search for a heading using the authority control plugin
the heading is inserted (note, however, that this patch does not AND IS NOT
INTENDED TO fix the bugs in the authority plugin with duplicate subfields;
those are wholly out of scope- this check is for regressions)
9. Turn on BiblioAddsAuthorities and AutoCreateAuthorities
10. Confirm that you can enter text directly into an authority-controlled field,
and if you enter a heading that doesn't currently have an authority record,
an authority record stub is automatically created, and the heading you
entered linked
11. Confirm that if you enter a heading with only a subfield $a that fully
*matches* an existing heading (i.e. the existing heading has only
subfield $a populated), the authid for that heading is inserted into
subfield $9
12. Confirm that if you enter a heading with multiple subfields that *matches*
an existing heading, the authid for that heading is inserted into
subfield $9
13. Turn on BiblioAddsAuthorities and turn off AutoCreateAuthorities
14. Confirm that you can enter text directly into an authority-controlled field,
and if you enter a heading that doesn't currently have an authority record,
an authority record stub is *not* created
15. Confirm that if you enter a heading with only a subfield $a that *matches*
an existing heading, the authid for that heading is inserted into
subfield $9
16. Confirm that if you enter a heading with multiple subfields that *matches*
an existing heading, the authid for that heading is inserted into
subfield $9
17. Create a record and link an authority record to an authorized field using
the authority plugin.
18. Save the record. Ensure that the heading is linked to the appropriate
authority.
19. Open the record. Change the heading manually to something else, leaving
the link. Save the record.
20. Ensure that the heading remains linked to that same authority.
21. Change CatalogModuleRelink to "on."
22. Open the record. Use the authority plugin to link that heading to the
same authority record you did earlier.
23. Save the record. Ensure that the heading is linked to the appropriate
authority.
24. Open the record. Change the heading manually to something else, leaving
the link. Save the record.
25. Ensure that the heading is no longer linked to the old authority record.
*** Testing link_bibs_to_authorities.pl ***
26. Set LinkerModule to "Default," turn on LinkerRelink and
BiblioAddsAuthorities, and turn AutoCreateAuthorities and
LinkerKeepStale off
27. Edit one bib record so that an authority controlled field that has already
been linked (i.e. has data in $9) has a heading that does not match any
authority record in your database
28. Run misc/link_bibs_to_authorities.pl --link-report --verbose --test (you may
want to pipe the output into less or a file, as the result is quite a lot of
information)
29. Look over the report to see if the headings that you have authority records
for report being matched, that the heading you modified in step 2 is
reported as "unlinked," and confirm that no changes were actually made to
the database (to check this, look at the bib record you edited earlier, and
check that the authid in the field you edited hasn't changed)
30. Run misc/link_bibs_to_authorities.pl --link-report --verbose (you may want
to pipe the output into less or a file, as the result is quite a lot of
information)
31. Check that the heading you modified has been unlinked
32. Change the modified heading back to whatever it was, but don't use the
authority control plugin to populate $9
33. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
34. Confirm that the heading has been linked to the correct authority record
35. Turn LinkerKeepStale on
36. Change that heading to something else
37. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
38. Confirm that the $9 has not changed
39. Turn LinkerKeepStale off
40. Create two authorities with the same heading
41. Run misc/migration_tools/rebuild_zebra.pl -a -z
42. Enter that heading into the bibliographic record you are working with
43. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
44. Confirm that the heading has not been linked
45. Change LinkerModule to "FirstMatch"
46. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
47. Confirm that the heading has been linked to the first authority record it
matches
48. Change LinkerModule to "LastMatch"
49. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
50. Confirm that the heading has been linked to the second authority record it
matches
51. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--auth-limit="authid=${AUTH}" (replacing ${AUTH} with an authid)
52. Confirm that only that heading is displayed in the report, and only those
bibs with that heading have been changed
If all those things worked, good news! You're ready to sign off on the patch
for bug 7284.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master and squashed follow-up, 16 February 2012
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master, 21 February 2012
Signed-off-by: schuster <dschust1@gmail.com>
In the data entry form, there is a (hidden) functionality for note subfields.
MARC21 500-599 and UNIMARC 300-399 subfields are displayed in TEXTAREA rather
than INPUT tags. This is good since usually notes can be pretty long. But if
one of those fields is marked in the framework as 'hidden', then it isn't
displayed at first when you create a record and when you expand the field by
clicking on its label the field is displayed in a one-line INPUT tag.
To reproduce this bug:
- Modify your framework:
MARC21: 500$a, hidden=1
UNIMARC: 300$a, hidden=1
- Create a new biblio record with this framework
- Open the tab containing 500 or 300 field
- 500 or 300 tab is collapsed
- Click on 500 or 300 label to expand the field
- 500$a or 300$a is displayed in a one-line INPUT tag, not in a TEXTAREA
as it should
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan works. Also checked cloning and deleting
subfields still works.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. Simplifies code too. Well documented test plan.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Links to UNIMARC documentation were being shown when marcflavour =
NORMARC. This patch hides the doc link functionality for NORMARC
by hiding:
1. The checkbox for turning doc links on/off
2. The hyperlinked questionmarks
This patch does not hide e.g. the JavaScript functions related to
the doc link functionality, in order to make it easy to add
doc links for NORMARC in the future (hopefully).
The doc link functionality was passing a variable called MARC21
(based on the contents of the marcflavour syspref) to the
template and testing the value of this to decide if MARC21 or
UNIMARC doc links were to be shown. I have replaced this variable
with he standard/full marcflavour syspref, in order to make it
possible to test for more then two MARC dialects.
To test:
- Set the marcflavour syspref to MARC21, NORMARC and UNIMARC, one
after the other.
- Check that correct doc links are shown for MARC21 and UNIMARC
on the cataloguing screen, and that no checkbox and no doc links
are displayed for NORMARC.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - thx for the great test plan!
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Display links to parent biblios, show linked items in holdings, allow holds on
linked items. This uses MARC to maintain relationships.
Sponsored by the Mississippi Department of Archives and History and RapidRadio
Solution. Originally developed by Savitra Sirohi and Amit Gupta at OSSLabs, with
UNIMARC support added by Zeno Tajoli. Commits squashed and merge conflicts
resolved by Chris Cormack from Catalyst. Respect for NORMARC and some small
framework portability fixes made by Jared Camins-Esakov of C & P Bibliography
Services.
IMPORTANT NOTE: A bug in the 773 coding for MARC21 was corrected from the
original OSS Labs code. The 773s generated by the pre-release code did not have
the first indicator set to '0', which means that they were not supposed to
display. Going forward, the first indicator will be set correctly, but existing
records created with this code will no longer appear (they appeared before only
due to another bug). To correct this, you could globally (or, to make sure you
only modify records created with the Analytics tool, for records with 773$0)
change the first indicator of the 773 from blank to '0'.
== Background ==
An analytic record for an item is a more detailed, monographic biblio for an
item attached to a serial record . This is often used for special issues of a
journal that are released as books on their own (assigned an ISBN, as well as an
ISSN/volume/issue). It is important for researchers to be able to search for
these items both as issues of the serial, and as monographs. It is equally
important for the library to not have duplicate item records for the item in
question to have to keep synchronized.
== Establishing relationships ==
Analytical records are connected to items belonging to parent or host
bibliographic records. This can be accomplished by:
* From an analytical bibliographic record linking to an host item by providing
the item barcode as input
* From a host item by using option "analyze", this creates a new empty
bibliographic record with field 773 (MARC21) populated
* Running a new CLI script that establishes a relationship between the
analytical record and the host item identified by the barcode in the
analytical record's 773$o (MARC21)
== Connecting Records ==
The relationships are maintained in the MARC records, we have not used database
tables at all.
== MARC Representation ==
In MARC21/NORMARC we have used:
* 773$9 to store the Koha item number of the host item
* 773$0 to store the Koha biblio number of the host bibliographic record
The above fields are used to display the relationships in various screens in the
OPAC and the staff interface. Additionally, when populating field 773 with host
item's details, we have used following MARC 21 mapping:
* 'a' <= 100/110/111 $a (author main)
* 'b' <= 250$a (edition)
* 'd' <= 260$a, 260$b, 260$c (place, publisher, year)
* 'o' <= barcode
* 't' <= 245$a (title)
* 'w' <= (003)001 --> if no 001 is available, we can populate biblionumber
* 'x' <= 022$a (issn)
* 'z' <= 020$a (isbn)
In UNIMARC, this code uses:
* 461$9 to store the Koha item number of the host item
* 461$0 to store the Koha biblio number of the host bibliographic record
When populating field 461 in UNIMARC, the following mapping is used:
* 't' <= 200$a (title)
== Treatment of Holds ==
A key requirement was to allow holds to be placed on host items from the
analytical record. We have accomplished this by allowing holds on specific
copies only. Biblio level holds are not allowed. This ensures that holds are
placed on specific items that are relevant to the analytical record.
== Deleting host items with linked analytical records ==
As we have not used database tables to maintain relationships, we had to use
search to find out if any linked analytical records are present. If 1 or more
analytical are present, we do not allow deletion of items. This is similar to
what we see when we try to delete authority records.
== Importing analytical records ==
Analytical records can be imported using bulkmarcimport or the GUI tools. The
new CLI script can be executed after the import to establish relationships with
host items. The script will establish relationships using the host item's
barcode, the barcode must be present in 773$o of the analytical record.
== What if there are two or more copies of the host item? ==
The current design will require that there be two host (773) fields, one for
each copy.
== What if there is no barcode available for the host item? ==
It is still possible to establish a relationship, by populating 773$9 with the
host's item number. However the CLI script uses barcode in 773$o to establish
relationships so it won't work where barcodes are unavailable. Also from an
analytical record, it is possible to establish a relationship to a host item by
providing the barcode as input, this option will not be available as well.
Commits that added the following features were squashed by Chris Cormack (this
is not a list of every commit):
* Display links to host records from biblio detail screens
* Support for UNIMARC, respecting the system preference 'marcflavor'
* Support holds from the OPAC
* Ability to link to items belong to host records from a analytical record
* Display items belonging to host records in the moredetail page
* Ability to edit items belonging to host records, also ability to delink from
them
* Move get host items code into a C4 routine, also calling the new routine in
related perl scripts
* Move host field population to a C4 routine, all changes in pl files to call
new routine
* Allow only specific copy holds for analytical records plus changes to use new
C4 routines
* Support for holds on items linked via host records
* Storing bibnumber and itemnumber in subfields 0 and 9, plus other mapping
changes
* New command line script that establishes relationships between analytical
records and host items and bibs. The script looks for host field (MARC21 773)
in records, and based on barcode in subfield 'o' populates host bibnumber in
subfield '0' and host itemnumber in subfield '9'. The script can be run after
an import of analytical records, it can also be run in the crontab to maintain
the relationships
* Ability to create analytical records from items, to view linked analytics, and
prevent deletion of items that have linked analytics
* New template for catalogue/detail.pl (NOTE: not a new template file, just a
new way of displaying analytics), template displays linked analytics and
allows creation of analytical records
* New zebra index for item number in host fields. This index will be used to
display links to analytical records from host records
* Display title of host record instead of the phrase host record
* Using detail.tmpl for analytics tab instead of a new template file
* Improved qualification info prepration in Prephostmarcfield
* Check for linked analytics before deleting item
* Display link to host record and more meaningful anchor text for edit item link
* Analytical record: Unimarc index in record.abs and help in
create_analytical_rel.pl
* Adding a sys pref that controls display of options to create analytical
relationships
* Add host entry in XSLT stylesheet in staff item detail
* Added host record support to OPAC detail XSLT
* Adding 773$0 and 773$9 to all frameworks
* Adding 773 subfields 0 and 9 to default marc framework via updatedatabase.pl
* Display create analytics and used in links in catalog detail
* Fixed problem where analytical records not showing in OPAC search results
because GetMarcBiblio now needs a flag to add item records
* Fixed problem where analytics count was set to 1 for all records, not just
those with analytics
* Fixed catalogue detail page not to show analytics counts if count is 0
Conflicts:
installer/data/mysql/updatedatabase.pl
koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/addbiblio.tt
kohaversion.pl
Co-author: Savitra Sirohi <savitra.sirohi@osslabs.biz>
Co-author: Zeno Tajoli <tajoli@cilea.it>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
It messes up javascript default values
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
TransformHtmlToMarc(): changed interface - no point passing params when
they can be accessed from $cgi
Signed-off-by: Liz Rea <lrea@nekls.org>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fixing improperly nested template logic inside HTML tags in MARC
editor. Modifying script to stop tag attribute markup from being
passed to the template directly in favor of using template logic.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- Adding similar icons for cloning and deleting tags
- Adding icon for the "Tag editor" links ("...")
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Remove some unnecessary checks when check of error is
sufficient. Make the order in some cases more logical
Should remove some possibilities of runtime warning noise.
Although some calls belong to the 'Nothing could
ever go wrong' school have added some warnings
Signed-off-by: Christophe Croullebois <christophe.croullebois@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Biblio framework has 3 entry points controlling if input box are
displayed by default in data entry form:
- 'mandatory' flag at field level
- 'mandatory' flag at subfield level
- 'hidden' flag at subfield level
It doesn't work as it should (?):
- All subfields are expanded (shown) if their field is mandatory
- A subfield containing anything is always expanded whatever it contains
- A mandatory subfield is always expanded
- An hidden subfield isn't expanded.
Default framework having 0 in all marc_subfield_structure.hidden, by default
all subfields will be expanded.
TO BE INTEGRATED IN RELEASE NOTES:
Koha sysadmin should have to edit its frameworks to add hidden=1 in
appropriate subfields.
Signed-off-by: Stéphane Delaune <stephane.delaune@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
If the subfield is set as mandatory with an empty default value, an
empty value is added in the selectbox and this value is selected by
default. Before, the first element was automatically selected, so it was
easy to forget to set this mandatory value.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When modifying an existing biblio, the "Save and edit items" option in the
"Save" menu did not redirect to the edit items screen. Instead, it redirected to
the regular details screen.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Save button and duplicate confirmation redirects must respect
the edititems permission: Users without permission to edit items
should not be redirected to the edit items screen.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- Adding "readonly" class to readonly fields to guarantee
that readonly state is indicated visually
- Adding "locked" icon to the background of readonly
fields for additional visual feedback
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
More podchecker cleanups to eliminate warnings / errors
Signed-off-by: Andrew Elwell <Andrew.Elwell@gmail.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The way an existing value was tested was wrong. 0 is a valid value but a
false value for Perl.
=> replace privious proposal.
[3.2] Should also apply.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Patch from Tomás Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
A follow-up to the fix for Bug 4121, the user should be able to control whether
the action of saving a bibliographic record takes them to the add item screen
or the detail screen, independently of whether they are adding or modifying the
record.
The addition of a "split button" would leave the default action in place if the
user clicked the "main" part of the button. Clicking on the menu would give the
user specific choices.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Numbers in perl with leading zeros are interpreted in octal
Ensure that comparisons are done using string operators
or where appropriate use the MARC::Field method
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Before this patch, we used to test for flags == 1, which was wrong when patron had all privileges.
This patch just adds a %2 to check that patron has superlibrarian privilege, and maybe something else we don't care.
I think I fixed it everywhere except in acquisition, that will be addressed by BibLibre new acquisition module.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
It turns out that the "blank" record created by MARC::Record->new()
has a leader, so now I explicitly create one in addbiblio.pl. I
also realized I can't count. :-)
Modified per comments by Joe and Galen to keep SetMarcUnicodeFlag
and move it and the leader set to earlier in the process.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
biblios can now be added librarian name automatically when cataloguing.
add "user" in the Default value of the biblio
[RM doc note: in other words, if in the MARC framework you set
the default value of a subfield to 'user', the username of the
cataloger will be entered into that subfield whenever you create
or modify that bib in the Koha bib editor.]
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
When clicking on the '...' of an headings field
in the bib editor, the authority search that
popped up did not take the default search
string from the bib field. Fixed by making
sure that openAuth is always used to do the
popup link.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
It turns out that the "blank" record created by MARC::Record->new()
has a leader, so now I explicitly create one in addbiblio.pl. I
also realized I can't count. :-)
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch makes sure that MARC21 authorities have a minimal
Leader, 008, and 040. If an authority record is created through
BiblioAddsAuthority it generates a 670 based on information in
the bib record.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
