The second patch of this report made some changes to CalcDateDue.
We are adding some unit tests here.
See the commments on the third patch too.
Test plan:
Run t/db_dependent/Circulation_dateexpiry.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Set the number of tests for the second subtest (was
commented) and perltidy the second block.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Moved the test on its own. Nicer than adding TestBuilder in the final part
of the test. No warnings/errors from TestBuilder, no dependency..
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
An expiry date like 9999-12-31 in the local timezone will make DateTime
spend a lot of time (maybe 60 seconds) on date calculation. See the
DateTime documention on CPAN.
A calculation in floating (or alternatively in UTC) would only take
a few milliseconds.
This patch makes two changes in this regard:
[1] The compare between expiry date and today in CanBookBeIssued has been
adjusted in Jonathan's patch. I am moving the compare to the floating
timezone (as was done in my original patch). This removes a hardcoded
9999.
[2] If ReturnBeforeExpiry is enabled, CalcDateDue compares the normal due
date with the expiry date. The comparison is now done in the floating
timezone. If the expiry date is before the due date, it is
returned in the user context's timezone.
NOTE: The calls to set_time_zone moving to or from floating do not adjust
the local time.
TEST PLAN:
First without this patch (and the one from Jonathan):
[1] Set expiry date to 9999-12-31 for a patron.
[2] Enable ReturnBeforeExpiry.
[3] Checkout a book to this patron. This will be (very) slow.
Continue now with this patch applied:
[4] Check in the same book.
[5] Check it out again. Should be much faster.
Bonus test:
[6] Set borrower expiry date to today. Change relevant circulation rule
to loan period of 21 hours. Test checking out with a manual due date
/time just before today 23:59 and after that. In the second case the
due date/time should become today 23:59 (note that 23:59 is not
shown on the checkout form).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If a patron has a expiry date set to 9999-12-31 (for organizations for
instance), the checkouts are very slow.
It's caused by 2 different calls to DateTime in CanBookBeIssued:
1/
DateTime->new( year => 9999, month => 12, day => 31, time_zone => C4::Context->tz );
The time_zone should not be set (as it's done in Koha::DateUtils), set to UTC or floating tz.
2/
DateTime->compare($today, $expiry_dt)
The comparaison of 2 DT with 1 related to 9999 is very slow, as you can
imagine.
For 1/ we need to call Koha::DateUtils::dt_from_string (actually, we
should never call DateTime directly).
For 2/ we just need to test if the date is != 9999, no need to compare
it in this case.
Test plan:
Before this patch, confirm that the checkouts are slow if the patron has a
dateexpiry set to 9999-12-31.
update borrowers set dateexpiry="9999-12-31" where borrowernumber=42;
After this patch, you should not see any regression when checking out
items to an expired patron and to a valid patron.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch fixes a SQL injection vulnerability in the local use
system preferences.
_TEST PLAN_
Before applying:
1) Go to Global System Preferences
2) Click on the "Local use" tab
3) Add a new preference with the value "') or '1' = '1' -- "
(be sure to include the space at the end after the comment --).
4) When the page refreshes, you should now see about 99 other system
preferences which shouldn't be showing up.
5) Apply the patch
6) Refresh the page
7) Note that you now only see a system preference for "') or '1' = '1' -- "
and the other actual local use system preferences.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
TEST PLAN
---------
1) Backup the koha intranet error log.
2) Empty the koha intranet error log.
3) In staff client, go to Patrons
(/cgi-bin/koha/members/members-home.pl)
4) Pick any letter to 'Browse by last name'
-- koha intranet error log now has warns.
-- the one of importance is the uninitalized value.
5) Empty the koha intranet error log.
6) apply this patch
7) Repeat steps 3 & 4.
-- koha intranet error log does not contain the
uninitialized value error.
8) run koha qa test tools.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Happily this was only used for intranetdir.
It's time to remove it and replace existing calls.
I used the following commands to catch calls to C4::Context:
git grep 'C4::Context\->' | grep -v 'C4::Context->preference' | grep -v
'C4::Context->config' | grep -v 'C4::Context->userenv' | grep -v
'C4::Context->IsSuperLibrarian' | grep -v 'C4::Context->dbh' | grep -v
'C4::Context->set_preference' | grep -v '_syspref_cache' | grep -v
_userenv | grep -v 'C4::Context->interface' | grep -v
'C4::Context->Zconn' | grep -v 'C4::Context->queryparser' | grep -v
'C4::Context->tz' | grep -v 'C4::Context->boolean_preference' | grep -v
'C4::Context->memcached'
NOTE: I applied 14428, and then did what I suggested in comment #2.
Only intranetdir references appeared.
I applied this patch, and repeated.
Nothing appeared. This means the autoload references are
properly removed.
koha qa test tools complained about whitespace, I just fixed
those. Though, we may wish to perltidy
auth_fields_substructure.pl on another bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The script catalogue/getitem-ajax.pl is called by acqui/orderreceive.pl
when item is receipt.
There is not auth check done, this means anybody can retrieve item info.
Test plan:
With the acquisition => order_receive permission, try to receive an
item.
It should work.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Very easy to test.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The exported CSV file from the item search didn't display the publication
year in MARC21 installations and the title always contained 'by'
even if there was no author information to display. Also the by is
not needed by MARC21 as the data should include punctuation.
This basically copies the changes done to the JSON format
on bug 13859 to the CSV include.
To test: Switch from 'Screen' to 'CSV'
- Check publication date always displays (MARC21 and UNIMARC)
- Check that for MARC21 the 'by' has been removed from the title information
- Check that for UNIMARC the 'by' only displays when there is also
an author to display
Tested for MARC21, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart agreed that C4::Input is vestigial code that should be removed.
Here is how I checked. First I found where C4::Input was used. Then, I checked
what functions are in the package: just checkdigit. Then, I confirmed that
checkdigit is not used at all in any acquisition, administration, or member
related perl scripts. Lastly, I took a look at our supposed test file for the
package. It was painfully sparse.
As such, this patch removes the test file and the package file, and removes
C4::Input references from these six files:
- acqui/addorderiso2709.pl
- acqui/basketgroup.pl
- acqui/neworderempty.pl
- acqui/uncertainprice.pl
- admin/aqplan.pl
- members/memberentry.pl
NOTE: neworderempty had 3 lines of it?! Didn't anyone see that?!
Here is the output of what I did to confirm this correction:
mtompset@debian:~/kohaclone$ git reset --hard origin/master
HEAD is now at 6e9086f Bug 3206: (QA followup) missing comma on sysprefs.sql
mtompset@debian:~/kohaclone$ git grep C4::Input
C4/Input.pm:package C4::Input; #assumes C4/Input
C4/Input.pm:C4::Input - Miscellaneous sanity checks
C4/Input.pm: use C4::Input;
acqui/addorderiso2709.pl:use C4::Input;
acqui/basketgroup.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/uncertainprice.pl:use C4::Input;
admin/aqplan.pl:use C4::Input;
members/memberentry.pl:use C4::Input;
t/Input.t: use_ok('C4::Input');
mtompset@debian:~/kohaclone$ grep sub C4/Input.pm
sub checkdigit ($;$) {
my $temp2 = substr($infl,$i,1);
if ($rem eq substr($infl,8,1)) {
} # sub checkdigit
mtompset@debian:~/kohaclone$ grep checkdigit `find acqui -type f`
mtompset@debian:~/kohaclone$ grep checkdigit `find admin -type f`
mtompset@debian:~/kohaclone$ grep checkdigit `find members -type f`
mtompset@debian:~/kohaclone$ cat t/Input.t
use strict;
use warnings;
use Test::More tests => 1;
BEGIN {
use_ok('C4::Input');
}
Apply this patch, and the output of git grep C4::Input will be empty.
Run koha qa test tools (kind of overkill)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Get notes and subjects from MARC record
ONLY when XSLT is not activated.
It's useless doing it when XSLT is activated,
because XSLT takes care of it by its own.
=> With this patch, we are saving precious
milliseconds
I compared the display of some records in XSLT view with and without patch, was the same (as expected).
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
On a slower server, I saw a time save of 0.0274 to 0.0908 seconds (with XSLT).
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch makes includes/patron-toolbar.inc (the one in charge of
rendering the 'New patron' dropdown) make use of the Categories
Template Toolkit plugin to create the list of categories.
(1) To check the setup is sane:
- Go to the Patrons page
=> SUCCESS: The 'New patron' dropdown is populated
- Click on the [+] symbol on the Patron search on the top
=> SUCCESS: The Categories dropdown is populated
(2) To test the patch:
- On the checkout form, perform a patron search that
(a) returns more than one result
(b) returns zero results
- Click the dropdown menu to create a new patron
=> FAIL: Dropdown is empty
- Repeat for (a) or (b)
- Apply the patch and reload
=> SUCCESS: The dropdown is correctly populated
- Repeat (1)
=> SUCCESS: Nothing got broken
- Verify the logs
=> SUCCESS: No new warnings
- Sign off :-D
- Get a cookie
- Smile
Regards
Discussion: we might need a new bug to start cleaning stuff like this:
@categories=C4::Category->all;
if(scalar(@categories) < 1){
$no_add = 1;
$template->param(no_categories => 1);
}
else {
$template->param(categories=>\@categories);
}
but it belongs to a new bug me thinks. Well, suggestions are welcome, but this must
be fixed on stable ASAP so hurry :-D
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
There is no help for the pending on site checkouts report. This patch
adds it.
To test:
* visit pending on site checkouts
* click help
* confirm help is there and correct
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds the missing order from subscription help and updates basket
help.
To test:
* Visit a basket, review the help
* Click order from a subscrption, review the help
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds the missing discharge help file and updates the moremember file with
info on discharges.
To test:
* Visit a patron
* View and confirm help is right
* Visit the discharge page on the patron
* Confirm help file loads and is right
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch updates 3 help files for catalolging in 3.20
To test:
* Visit
* cataloging home
* cataloging a new record
* mergin bib records
* Confirm text is right and visible
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch updates the help files for 3.20
To test:
* Visit
* Main patron page
* Patron search page
* Patron permissions page
* Confirm the text is right on all three
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
In cataloguing/addbooks.tt, the line :
[% total %] result(s) found in catalog,
is not present in PO files even after an update.
I've found that the cause is the previous HTML comment line.
This patch converts HTML comment into TT comment and adds a div to have a more comprehensive string to translate.
Test plan :
- without patch
- go into <sources>/misc/translator
- run PO update for example in french : translate update fr-FR
=> the text "result(s) found in catalog" is missing from PO file : fr-FR-staff-prog.po
- restore default PO files
- apply patch
- go into <sources>/misc/translator
- run PO update for example in french : translate update fr-FR
=> You find text "result(s) found in catalog" in PO file : fr-FR-staff-prog.po
Sponsored-by: Universidad de El Salvador
Signed-off-by: Hector Eduardo Castro Avalos <hector.hecaxmmx@gmail.com>
Works as advertised. Just one msgid appear with msgid "%s result(s) found in catalog,"
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- Fix QA.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New pref in right order, new option 'no' on syspref, other
fixes following comment #12
All seems to work
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows Koha OAI repository to support deleted records.
The OAI-PMH:DeletedRecord syspref is introduced and can be set to:
- persistent (in case Koha's deletedbiblio table will never be emptied
or truncated)
- transient (in case Koha's deletedbiblio table might be emptied or
truncated at some point)
Test plan:
- After applying the patch, test that:
- Deleted records appear in ListRecords and ListIdentifiers requests.
- Filter parameters (from, until, set and resumptionToken) still work
and are applied to ListRecords and ListIdentifiers requests.
- Identify request shows if the repository is considered persistent
or transient, according to the OAI-PMH:DeletedRecord syspref.
- Deleted records that used to belong to a set are still displayed in
those sets and marked as deleted.
- GetRecord requests work on deleted records, which are marked as deleted.
Requests examples:
/cgi-bin/koha/oai.pl?verb=ListRecords&metadataPrefix=oai_dc
/cgi-bin/koha/oai.pl?verb=ListRecords&metadataPrefix=oai_dc&from=2015-02-20T11:08:33Z
/cgi-bin/koha/oai.pl?verb=ListRecords&metadataPrefix=oai_dc&set=new_specSet1
/cgi-bin/koha/oai.pl?verb=GetRecord&identifier=KOHA-OAI-TEST:2&metadataPrefix=oai_dc
/cgi-bin/koha/oai.pl?verb=Identify
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works in all situations described in the test plan. Great addition.
Thanks.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch causes the "Units" to be saved and displayed correctly
for the "Edit layout" screen in Patroncards.
_TEST PLAN_
Before applying:
0) Create a new layout
1) Edit the layout, change the units, and click Save
2) Edit the layout again, and notice the units are still "PostScript Points"
Apply the patch:
3) Edit the layout again, change the units, and click Save
4) Edit the layout again, note that the units have changed to your
selection
5) Rejoice
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On the item search form the list of home libraries isn't sorted
alphabetically by their descrption.
To test:
- Ensure that you have libraries whose code/name are sorted in a different alphabetical order (e.g. Aardvark/ZZZ & Zebra/AAA)
- Staff: Advanced search - item search
- See that libraries are sorted in code order
- Apply patch
- Verify selection block for home library is correctly sorted after
applying the patch.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
'Show all' in acquisition makes the inactive funds in the fund list
box visible. This patch changes the text to 'Show inactive' to be more
clear about the functionality.
Patch changes 2 pages. To test:
1) Order from staged file
- make sure you have uploaded a few records via the tools
- create a new order using the 'From a staged file' option
- select a file to order from - 'Add orders'
- Verify the 'Select to import' tab now displayed the text
'Show inactive funds' and that it works as expected
- Switch to the 'Default accounting details' tab
- Verify the text there is also changed to 'Show inactive' and
works like expected.
2) Receive shipment
- receive a new shipment for a vendor with unreceived orders
- Verify the label next to the fund list has changed to
'Show inactive' and works as expected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Simple string change, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On the order form there is a checkbox next to the fund list labelled
'show all'. Checking the checkbox will result in the inactive funds
showing in the pull down list as well.
The patch renames the label to 'Show inactive' to make the purpose
more clear.
To test:
- Create a new order
- Verify the label has changed as described above
- Decide if the change makes sense
Signed-off-by: tadeasm <tadeas.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Make the shipped XSLTs for authorities (MARC21 and UNIMARC) the same as the generated version
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In authority-koha-indexdefs.xml, all tags use the namespace "kohaidx" except the tag "id".
When re-generating authority-zebra-indexdefs.xsl, the line :
<xslo:variable name="idfield" select="normalize-space(marc:controlfield[@tag='001'])"/>
is modified :
<xslo:variable name="idfield" select="normalize-space()"/>
This is an error.
This patch adds kohaidx namespace to correct.
Test plan :
- Without patch
- go to etc/zebradb/marc_defs/marc21/authorities/
- run : xslproc xsltproc ../../../xsl/koha-indexdefs-to-zebra.xsl authority-koha-indexdefs.xml > authority-zebra-indexdefs.xsl
- read authority-zebra-indexdefs.xsl
=> the line has changed : <xslo:variable name="idfield" select="normalize-space()"/>
- Apply patch
- go to etc/zebradb/marc_defs/marc21/authorities/
- run : xslproc xsltproc ../../../xsl/koha-indexdefs-to-zebra.xsl authority-koha-indexdefs.xml > authority-zebra-indexdefs.xsl
- read authority-zebra-indexdefs.xsl
=> the line has not changed
(same for unimarc flavor)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
As Mirko mentioned, the xslt's now generate the facet-processing templates in
the authority xslt's too. They are harmless because we don't define facets
for authority records. If we did, it would be harmless too.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Apply this patch
2) Ensure you are using the default XSLT setting for the staff and opac record details
3) Perform an opac search check "Availability" for expected display values.
5) Note this patch corrects invalid syntax in xslt, there should be no visable changes to the results page.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
includes/authorities-search.inc already used the same behavior but with
another method.
For consistency it's better to have only 1 way to do that.
Test plan:
Go on the authority home page
Fill the input in the header and click on tab 'search all headings' and
'keyword search' and confirm that the text you have filled is kept.
I tested after applying the patch and the text is kept after removing the
part from authorities-search.inc. I also tried applying that jQuery solution
instead of my JS loop but could not get it to work for the other pages with
a reasonable ammount of effort.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Eivin Giske Skaaren <eskaaren@yahoo.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
Apply the patch and see that the text now is there in the search
box when clicking the tabs: check in, check out etc..
(More files changed for persistent text in searchbox)
Sponsored-by: Halland County Library
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
This is something I have wanted quite a few times over the years...
Tested by going to every main area of Koha, entering some random
text into the search box and then clicking on all the available tabs
to check that the entered text is carried over to all the boxes.
There are a couple of places where text is not carried over, but I
guess that might be because one of the boxes is structurally
different to the others. These are:
- "Vendor search" and "Orders search" in Acquisitions
- "Search subscriptions" in Serials
I have not looked at how this is implemented, just that it works as
it should.
Bug 14189 refactor after failed QA.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Amended patch: replace tabs with spaces
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
---------
1) Ensure you have a book that would pull up an idreambooks image
(e.g. The road to character / David Brooks.)
-- I imported from the Library of Congress via z39.50
2) Ensure your system preferences for idreambook stuff is set.
3) Ensure you have multiple 020$a's for your book, and
the first one must just be an ISBN number!
-- I removed the '(hardcover: acidfree paper)' from the first.
-- I took the second 020 field and changed 020$z to 020$a
4) Search for that book in OPAC and go to details.
-- There should be a readometer image, but it will be broken.
-- Notice the ISBN line has "#############; ..."
This could also be attained by just putting two semi-colon
separated ISBN's on the first 020$a.
5) Apply this patch
6) Refresh page
-- readometer image appears. YAY!
7) run koha qa test tools
NOTE: Only changed test plan, so leaving sign-off on.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
by caching yaml file This patch improve circulation performance by caching yaml file With this patch we saved between 300ms and 500ms on circulation page.
Following Comment #3 :
No useless warn
No tidy
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Less lines, same result.
Comments were useful on testing :)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The 'Local Use' system preference addition/modification template provides the following options against "Variable Type" - Choice, YesNo, Integer, Textarea, Float, Themes, Languages, Upload or ClassSource.
There is no option presented for "Free" which seems to be the most
used variable type out-of-the-box (i.e. INTRAdidyoumean,
OPACdidyoumean, UsageStatsID and UsageStatsLastUpdateTime)
This trivial patch proposes to modify the systempreferences.tt
and add the option 'Free' to the list offered to users.
Test Plan
=========
1/ Go to Home > Administration > System preferences > Local use
2/ Click on 'New preference'.
3/ In the fieldset 'Koha Internal', the variable types offered
are Choice, YesNo, Integer, Textarea, Float, Themes,
Languages, Upload or ClassSources.
4/ Clicking on 'Choice' should set the 'preftype' field as
'Choice'.
5/ Apply this patch.
6/ Refresh the page.
7/ The variable types list should read - "Free, Choice, YesNo,
Integer, Textarea, Float, Themes, Languages, Upload or
ClassSources".
8/ Clicking on 'Free' should set the 'preftype' field as 'Free'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Discovered that there is no validation on the type field.
However, that is beyond the scope of this bug.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The regex /|date>>/ will match much more than you like :)
The unescaped pipe is bad, but you also need to remove the >> because
the split a few lines above it removes them already.
This allows you to recover from an error like this one, running another
report with a string parameter:
The given date (india%) does not match the date format (us) at
Koha/DateUtils.pm line 144.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended for possible spaces around the word date.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The issue is that SQL expects ISO dates, but the user may wish to view dates according to the dateformat system preference.
By detecting a date preference, the non-ISO dates can be converted to ISO dates before being stuffed back into the SQL query to be executed.
TEST PLAN
---------
1) Add a report with date parameters.
-- I used 'Holds placed in date range' from
http://wiki.koha-community.org/wiki/SQL_Reports_Library
2) Set your dateformat to YYYY-MM-DD
3) Run the report
-- Note the SQL reads
"... BETWEEN '{date formatted in YYYY-MM-DD}'..."
-- If there is supposed to be data, there is some.
4) Set your dateformat to MM/DD/YYYY
5) Run the report
-- Note the SQL reads
"... BETWEEN '{date formatted in MM/DD/YYYY}'..."
-- If there is supposed to be data, there is none.
6) Apply patch
7) Repeat steps 2-5
-- The SQL will always read YYYY-MM-DD (ISO) format.
-- The report will have data, if there is some.
8) koha qa test tools.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adding a QA follow-up.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
While testing bug 9006, I discovered this gem in
installer/install.pl
TEST PLAN
---------
1) back up DB
2) drop db and create db
3) git reset --hard origin/3.20.x
4) run web installer and all sample data
5) git reset --hard origin/master
6) empty your koha intranet error log
7) run web installer to upgrade
-- there will be warnings regarding regex around
installer/install.pl line 328 or so.
grep "\$kohaversion" ~/koha-dev/var/logs/koha-error_log
8) repeat steps 2-6
9) apply this patch
10) run web installer to upgrade
-- no regex warnings.
grep "\$kohaversion" ~/koha-dev/var/logs/koha-error_log
11) koha qa test tools
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If a patron has requested anonymity on returning items and the system is
not correctly configured (AnonymousPatron no set or set to an inexistent
patron), the application should take it into account and not fail
quietly.
This patch is quite radical: the script will die loudly if the privacy
is not respected.
To be care of the bad "Software error", some checks are done in the
updatedatabase to be sure the admin will be warned is something is wrong
in the configuration.
Test plan:
1/ Test the updatedatabase entry:
a. Turn on OPACPrivacy and set AnonymousPatron to an existing patron
=> You will get a warning
b. Turn on OPACPrivacy and set AnonymousPatron to 0 or ''
=> You will get a warning
c. Turn on OPACPrivacy and set the privacy to 2 (Never) for at least 1 patron
Turn off OPACPrivacy
=> You will get a warning
d. In all other cases you will get no error
2/ Test the interface
a. Turn on OPACPrivacy and set the privacy to 2 (Never) for a patron
b. Now you can turn off OPACPrivacy or keep it on, behavior should be
the same
c. check an item out the patron
d. Check the item in using the check out table
=> fail
e. Check the item in using the Check in tab
=> fail (not gracefully).
Note that the software error could appear on other pages too.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Updatedatabase works as described
On staff, if don't have correct settings for anonymity it's
impossible to check-in (with OPACPrivacy on)
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Note that this does not appears at the OPAC.
We will need 2 different testers here, the results seem to depend on the
Encode version.
0/ Determine your Encode version (`pmvers Encode`).
If you have 2.60:
1) /cgi-bin/koha/catalogue/search.pl?q=ééé&op=Submit
You should get
" No results match your search for 'kw,wrdl: ���' in my library Catalog."
2) /cgi-bin/koha/catalogue/search.pl?q=ກ
You should get
Cannot decode string with wide characters at
/usr/lib/i386-linux-gnu/perl/5.20/Encode.pm line 215.
If you have <2.60 (? not sure here):
1) /cgi-bin/koha/catalogue/search.pl?q=ééé&op=Submit
You should not get encoding problems.
2) /cgi-bin/koha/catalogue/search.pl?q=ກ
You should not get encoding problems.
Apply this patch, try again 1 and 2.
If the Encode version is >=2.60, the encoding issues should be fixed.
If not, please detail if there are any regression.
NOTE: Tested on Ubuntu 14.04, Debian 8, and Debian 7. See comment #3.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The new security updates break previously functioning plugins, most
notably the cover flow plugin and the Ebsco EDS plugin.
Test Plan:
1) Install and configure the cover flow plugin ( http://bywatersolutions.com/koha-plugins/ )
2) Note that attempting to access coverflow.pl from the OPAC results in an error
3) Apply this patch
4) Note that coverflow.pl now output html again
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test plan:
1. Navigate to the "opaccredits" syspref (or any other textarea, i.e.,
"Click to Edit", syspref) in the system preferences editor.
2. Change its contents, by either pasting or typing. The field may not
be marked as modified, even after you click outside the box.
3. Apply the patch.
4. Reload the page and try again; either pasting or typing should mark
the field as changed and allow you to save.
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Confirmed working for normal input, paste and middle-click paste in
Chrome and Firefox in Linux.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch fix trivial duplicate
in about page.
To test:
1) Go to about page > translations
2) Check duplicate entry for Armenian
first in 4th line, second before indonesian
3) Apply patch
4) Reload page and check again
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Trivial string patch. The restults are the expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Double checked :-P
This patch adds a "Don't Check Out and Print Slip" button to the dialog that appears
when trying to checkout a reserved item.
Test case :
* Put a hold on an item for User A.
* Try to check out it item with User B.
* The "Please confirm checkout" box should appear. The "Don't Check Out and Print Slip" button should appear in this box.
* Click on the "Don't Check Out and Print Slip" button.
* A print popup will appear
Signed-off-by: Nick <Nick@quechelibrary.org>
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
There is no need to display the cardnumber and expiration date values in
a disabled input.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch makes it possible to show the expiration date
of a patron account in the OPAC on the details tab in the
patron account.
Extras:
- Makes it possible to hide cardnumber with
PatronSelfRegistrationBorrowerUnwantedField
To test:
- Toggle OPACPatronDetails and test date expiry always shows
- Check PatronSelfRegistrationBorrowerUnwantedField for dateexpiry
and cardnumber
- Verify a patron address modification request still works
as expected
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch uses check_api_auth instead of get_template_and_user.
Test plan:
Confirm that you are still able to access to the quote editor with the
edit_quotes permission.
Confirm that you are not if you don't have the permission.
wget your_url/cgi-bin/koha/tools/quotes/quotes_ajax.pl
should return "403 : Forbidden."
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
