This patch modifies the library transfer limits page to eliminate the
use of the jquery.checkboxes plugin.
To test, apply the patch and go to Administration -> Library transfer
limits.
- Test the "For all collection codes" links, "Select all" and "Clear
all." Each should affect all checkboxes on all tabs.
- Click various tabs and confirm that the "select all" and "clear all"
links within that tab work correctly, affecting only the checkboxes in
that tab.
Signed-off-by: Lisette Scheer <lisettes@latahlibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1- go to cgi-bin/koha/admin/branch_transfer_limits.pl
2- see wording "Check the boxes for the libraries you accept to checkin items from"
3- apply patch
4- see wording "Check the boxes for the libraries you allow your items to be transferred to"
To verify new wording accuractely describes behavior:
1- Set UseBranchTransferLimits set to Enforce using itemtype
2- Confirm circ rules allow holds
3- Confirm hold policy by item type allows holds
4- Confirm all branches are valid pickup locations in branch setup
5- In Branch Transfer Limits, set dropdown to Branch A, select itemtype Book, disable all transfers so Branch A does not accept books from any other branch
6- Find a patron from Branch A
7- Find a book from Branch B
8- On the intranet, successfully place hold on item for patron for pickup at branch A
9- Cancel hold
10- Log into opac as patron
11- Successfully place hold on item for pickup at Branch A
12- Cancel hold
13- In Branch Transfer Limits, set dropdown to Branch A, select itemtype Book, ENABLE all transfers so Branch A DOES accept books from any other branch
14- In Branch Transfer Limits, set dropdown to Branch B, select itemtype Book, disable all transfers so Branch B does not accept books from any other branch
15- On the intranet, try to place a hold on item for patron, confirm Branch B is your only pickup option
16- On the OPAC, log in as patron, try to place a hold on item, confirm Branch B is your only pickup option
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes trailing spaces and replaces tab characters with
spaces in the branch transfer limits template.
Mentored-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
DataTables are used on enough pages in the staff client that it
doesn't make sense to put inclusion of the CSS into each template
where it is needed. This patch moves includes of datatables.css from
individual templates into the global header file.
To test, apply the patch and view various pages which have DataTables.
View various styles of DataTables, e.g.
- Full pagination, like item search results
- Four-button, like Saved SQL reports
Everything should look the same as it was.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies staff client templates to remove the "type"
attribute from <style> tags. The attribute is no longer valid.
To test, apply the patch and confirm the changes to the templates. The
appearance of the staff client should be unchanged.
Validating pages from the staff client should not return any errors
related to the <style> "type" attribute.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch has been generated with the script provided on bug 21576.
It only affects variable used in the href attribute of a link *when*
href it the first attribute of the node (grep "a href")
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies several acquisitions templates to use the Bootstrap
grid instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags in the modified templates.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
- Administration -> Authority types
- View list of and edit authority types
-> MARC tag structure for an authority type
- View list of and edit tags
-> Subfields
- View list of and edit subfields
- Administration -> MARC bibliographic framework
- View list of and edit frameworks
- Administration -> Libraries
- View and edit libraries
- Administration -> Library transfer limits
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Here we go, next step then.
As we did not fix the performance issue when autofiltering
the variables (see bug 20975), the only solution we have is to add the
filters explicitely.
This patch has been autogenerated (using add_html_filters.pl, see next
pathces) and add the html filter to all the variables displayed in the
template.
Exceptions are made (using the new 'raw' TT filter) to the variable we
already listed in the previous versions of this patch.
To test:
- Use t/db_dependent/Koha/Patrons.t to populate your DB with autogenerated
data which contain <script> tags
- Remove them from borrower_debarments.comments (there are allowed here)
update borrower_debarments set comment="html tags possible here";
- From the interface hit page and try to catch alert box.
If you find one it means you find a possible XSS.
To know where it comes from:
* note the exact URL where you found it
* note the alert box content
* Dump your DB and search for the string in the dump to identify its
location (for instance table.field)
Next:
* Ideally we would like to use the raw filter when it is not necessary
to HTML escape the variables (in big loop for instance)
* Provide a QA script to catch missing filters (we want html, uri, url
or raw, certainly others that I am forgetting now)
* Replace the html filters with uri when needed (!)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Having to write [% KOHA_VERSION %] for each url is bad because:
- It's easily forgettable when adding new <script> or <link>
- It prevents grep'ing for the full filename
- It violates the DRY principle
- If at some point we want to change the "force js and css reload"
mechanism, it will be tedious
This patch:
- adds a Template::Toolkit plugin that generates <script> and
<link> tags for JS and CSS files, and inserts automatically the Koha
version in the filename
- use the new plugin to remove all occurences of [% KOHA_VERSION %]
- remove the code that was adding KOHA_VERSION as a template variable
Test plan:
1. Apply patch
2. Go to several different pages in Koha (opac and intranet) while
checking your browser's dev tools (there should be no 404 for JS and
CSS files, and the Koha version should appear in filenames) and the
server logs (there should be no "File not found")
3. `git grep KOHA_VERSION` should return nothing
4. prove t/db_dependent/Koha/Template/Plugin/Asset.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the staff client patrons and circulation-related
administration templates so that JavaScript is included in the footer
instead of the header.
To test, apply the patch and test the JavaScript-driven features of
each modified template: All button controls, DataTables functionality,
tabs, etc.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Edit: Rebased
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In branch transfer limits, tables are paginated with 20 rows by default.
The bug is that datatable not only hides rows, they are not in form.
So when submitting form, rows not visible are erased.
Test plan :
Wihout patch :
- Create 22 branches, you can hack the creation form by manualling calling URL : /cgi-bin/koha/admin/branches.pl?op=add_validate&branchcode=Bxx&branchname=Bxx
- Go to Administration > Library transfer limits
- You see table first page : only 20 first rows are shown
- You see all checkboxes are checked
- Go to second page of this table
- Save
=> You see table first page with all checkboxes unchecked
With patch the is no pagination, all checkboxes are shown when you save
Signed-off-by: Axelle Clarisse <axelle.clarisse@univ-amu.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch is amended to use the sysprefs search on all Administration
pages that do not have their own custom search.
To test:
1) Go to Administration
2) Notice Catalogue search at the top - seems out of place.
3) Apply patch and refresh page.
4) Notice admin / sysprefs search now shows and is more appropriate.
5) Confirm searching for sysprefs still works
This patch affects the following pages:
- admin-home.pl
- audio_alerts.pl
- authtypes.pl
- auth_tag_structure.pl
- authorised_values.pl
- biblio_framework.pl
- marctagstructure.pl
- branch_transfer_limits.pl
- branches.pl
- checkmarc.pl
- classsources.pl
- columns_settings.pl
- didyoumean.pl
- edi_accounts.pl
- edi_ean_accounts.pl
- fieldmapping.pl
- item_circulation_alerts.pl
- items_search_fields.pl
- items_search_field.pl
- item_types.pl
- koha2marklinks.pl
- matching-rules.pl
- oai_sets.pl
- oai_set_mappings.pl
- patron-attr-types.pl
- smart-rules.pl
- transport-cost-matrix.pl
- sms_providers.pl
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
For purpose to uniformity and leave just one entry in .po files,
this patch change: Check all/Uncheck all -> to -> Select all/Clear all.
Also added Font Awesome icons.
To test:
-Go to Administration > Library transfer limits
-Notice about Check all/Uncheck all for "For all items types" and
"Policy for:"
-Apply patch and refresh the screen
-Notice about the new Select all/Clear all links with their icons
-Confirm that all links work as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The staff client CSS is not language-specific, so it can be moved out of
the en/ directory and thus not be duplicated for every translation.
In order to be able to have a generic path to the YUI CSS files, the YUI
directory is moved by this patch to the staff client's lib/ directory.
To test, apply the patch and visit various pages in the staff client.
Look in particular at pages which include more than the standard CSS.
For example:
- The staff client login page.
- The staff client home page.
- Patron -> Set permissions.
- The advanced cataloging editor.
- Acquisitions -> Vendor -> Basket groups.
- Tools -> News -> Edit news.
- Administration -> System preferences.
Revised: I intended for this to be built on top of Bug 15883. Now it is.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
On top of 15883
Works as described, all pages on test plan
No Errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Admin -> Library Transfer Limits
2) Notice that you do not have to click the Choose button when selecting a new library
3) Refresh page
4) Notice that Choose button is gone and page still works
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
In branch_transfer_limits.tt, set ambiguous word 'all' (separated by tags) into a
translatable context.
To test:
Apply patch
- Go to Home > Administration > Set library checkin and transfer policy
- Verify that the word 'all' is no longer separated by tags
in "For all collection codes: " rsp. "For all item types: "
(Switch with syspref 'BranchTransfersLimitsType')
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works well for translation purpose
Bug 15363: (followup) Move tags inside if statements
Followup for comment #3
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Some scripts pass a template variable to facilitate an alternate table
row class for styling. Other use the 'IF (loop.odd)' construction. I
think we're at the point where the CSS3 :nth-child() selector is
widely-supported enough that we can do without template-based solutions:
http://caniuse.com/#feat=css-sel3
This patch adds such a selector to the staff client CSS and removes the
corresponding template markup from Administration pages. The last in
this series of patches will remove the redundant CSS.
Also in this patch: a few minor markup corrections.
To test, apply the patch and clear your browser cache if necessary. View
the following pages and confirm that alternate table row highlighting
works as before:
- Administration -> Budgets
- Acquisitions -> Vendor -> Contracts
- Administration -> Budgets -> Budget -> Planning
- Administration -> Authority types
- Administration -> Authority types -> MARC structure
- Administration -> Authority types -> MARC structure -> subfields
- Administration -> MARC bibliographic framework
- Administration -> MARC bibliographic framework -> MARC structure
- Administration -> MARC bibliographic framework -> MARC structure -> Subfields
- Administration -> Libraries and groups
- Administration -> Cities and towns
- Administration -> Classification sources
- Administration -> Circulation and fines rules
- Administration -> Currencies and exchange rates
- Administration -> Item types
- Administration -> Koha to MARC mapping
- Administration -> System preferences -> Local use
- Administration -> Z39.50 client targets
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes reported strings translatable.
To test:
1. Go to Administration > Library transfer limits
2. Depending on the value of BranchTransferLimitsType
your may see in a box:
a) For *all* Collection codes:
b) For *all* Item types:
change system preference to show both values
3. Update translation files for your preferred language
check new entry
msgid "%sCollection codes%sItem types%s: "
Not pretty but can be translated.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have to confess that I lower cased the collections and item
types as they appear in a sentence.
No other changes made and this works nicely.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch moves the checkboxes jQuery plugin to
intranet-tmpl/prog/lib/jquery/plugins so that it will not be duplicated
for each set of translated templates.
To test, apply the patch and confirm that select all/clear all controls
continue to work on the following pages:
- Acquisitions -> Late orders
- Acquisitions -> Add to order from an external source (search targets)
- Acquisitions -> Suggestions
- Administration -> Funds -> Planning (show/hide all columns)
* Some unused code has been removed
- Administration -> Library transfer limits
- Staff client cart
- Authorities -> New from Z39.50 (search targets)
- Cataloging -> New from Z39.50 (search targets)
- Circulation -> Check out to a patron (renew/check in selections)
- Circulation -> Offline circulation -> Pending operations
- Patrons -> Patron detail (renew/check in selections)
- Patrons -> Fines -> Pay fines
- Serials -> Subscription -> Serial collection
- Tools -> Label creator -> Batches -> Search results
- Tools -> Patron card creator -> Batches -> Search results
- Tools -> Tags moderation
- Tools -> Batch item deletion
- Tools -> Batch item modification
- Tools -> Inventory -> Submit a batch of barcodes
- Lists -> List contents view
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described! I don't think I've ever checked so many boxes
before...
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The default entry is 20 and can be apply to all tables.
Bug 11555 apply the menu entries to all tables, redefining it is
uesless and can be removed.
Test plan:
Test pages impacted by this patch and verify there is no regression on
the tables.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
administration-related pages which use DataTables.
To test, view the following pages and confirm that table sorting is
still working correctly:
- Administration -> Budgets
- Administration -> Authority types -> MARC structure
- Administration -> Authorized values
- Administration -> Library transfer limits
- Administration -> Libraries and groups
- Administration -> Patron types and categories
- Administration -> Cities and towns
- Administration -> Item types
- Administration -> MARC bibliographic framework -> MARC structure
- Administration -> System preferences
- Administration -> System preferences -> Local use
- Administration -> Z39.50 client targets
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Sorting works. No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Replace the tablesorter plugin with the DataTables plugin on the
library transfer limits page.
Also made minor changes to "check/uncheck all" function to prevent page
from jumping on click, and removed unused function.
To test, open the library transfer limits page (Administration ->
Library transfer limits). Confirm that table sorting works correctly for
all tables.
Test that the "check all/uncheck all" links still work correctly.
Revision corrects template path to datatables assets.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Add the aLengthMenu key for DataTables + delete an unused
div block (used for pager)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Current jQuery-driven tabs are done using a very old
version of the tabs plugin. This patch upgrades jQueryUI
to the latest version and adds the tabs widget dependency
to the jqueryui js file and updates the syntax for existing
tabs:
- $("#foo > ul").tabs(); changes to $("#foo").tabs();
- Remove full URL from tab links (use #anchor only).
Pages with "static" tabs (tabs which are built in the
markup rather than generated by the plugin) have been
modified to use their own style. Examples: pay.tt in
the staff client and opac-readingrecord.tt in the OPAC.
Edit: Minor revision to some uncorrected markup
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Upgrade jQuery in the staff client. Besides the change
to the jQuery file syntax has been changed wherever this
syntax was written:
$(foo).attr("checked","");
The new correct way to un-check a checkbox:
$(foo).removeAttr("checked");
I also removed some JavaScript altogether from
branch-transfer-limits.tt which used the old syntax but
which wasn't used on the page at all anymore.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This is the first patch for bug 7760 and touches all pages in administration.
This adds a unique id "admin_<filename>" and a class "admin" to the body tag of
each page in administration.
Note: aqcontract can only be accessed from the acquisition module, so I made it acq
instead of admin.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
The patch which moved the table pager markup into an
include undid the fix which was previously pushed for
this problem. Re-implementing the fix in the pager
include is a simpler fix which doesn't depend on
the Datatables plugin.
The markup change in table-pager.inc fixes the problem
in branch transfer limits and does not affect functionality
on other pages.
The changes in this patch to branch_transfer_limits.tt and
staff-global.css are for cosmetic reasons only.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Saving changes works now correctly. I tried:
- uncheck all for a branch
- check all for a branch
- making changes for different itemtypes on different tabs
Created new include for the tablesorter pager markup:
[% INCLUDE 'table-pager.inc' perpage='20' %]
'perpage' variable defines the default items per page for
the paged table.
Unique changes in branch_transfer_limits.tt:
- Moved tablesorter configuration out of a loop and changed
it to work by class instead of id (less repeated markup).
- Corrected an errant TMPL tag.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- Changing library select form so that chosen library is preselected
- Changing pager <form> to a <p> so that nested form tags don't
conflict. It was the addition of the javascript table pager
which broke the functionality on this page.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- It's possible to select a different library now. The pull down shows
the chosen library correctly.
- I can make changes and save them without any problems.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
While fixing Bug 6395 I found a few other instances of leftover
TMPL usage.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
