Some SIP devices need access to item fields that are not sent as item information in the checkin, checkout and item information responses.
It makes sense to allow these fields to be sent in an arbitrary and configurable way, rather than hard code in each special case.
Test Plan:
1) Apply this patch
2) Edit your SIP2 config file, add the following within the login stanza:
<item_field field="XX" code="<item field 1>" />
<item_field field="XZ" code="<item fied 2>" />
where <item field 1> and <item field 2> are item table columns of your choosing
3) Using the sip cli emulator, run checkout, checkin and item information
messages using that item.
4) Note the values you set for the item columns are sent in the
corrosponding fields!
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Fixed merge conflict with number of tests (was 5, changed to 7 which is correct)
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Now that we have Koha::Logger, we should use it in our SIP server. This
has the potential to make debugging SIP issue much easier. We should add
the userid for the sipuser to the namespace so we can allow for separate
files per sip user if wanted.
Test Plan:
1) Apply this patch set
2) Update the modififed log4perl.conf to your system
3) Restart your sip server
4) Tail your sip2.log, run some queries
5) Note you still get the same output messages as before, with the
addition of the ip address and username ( if available )
prefixing the message.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
At some point some calls to maybe_add got an extra $server var in their
parameter lists. This doubled parameter does nothing and should be
removed.
Test Plan: No change in behavior should be noted
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - You will need to enable SIP on your testing instance
cp etc/SIPconfig.xml /etc/koha/sites/kohadev/
sudo koha-start-sip
add a user listed in the SIPconfig to your system and give them permissions (superlibrarian works)
on koha-testing-docker you should be able to start sip with user koha/koha without any adjustments
2 - If you copied the above file you should be set to get custom field DE with dateexpiry
Otherwise edit the sip login for the user to have a custom section like:
<login id="koha" password="koha" delimiter="|" error-detect="enabled" institution="kohalibrary" encoding="utf8" >
<custom_patron_field field="DE" template="[% patron.dateexpiry %]" />
</login>
3 - send a status test using the sip cli tester:
perl misc/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su koha -sp koha -l kohalibrary --patron 23529001000463 -m patron_status_request
4 - send an information test using the sip cli tester:
perl misc/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su koha -sp koha -l kohalibrary --patron 23529001000463 -m patron_information
5 - confirm you receive the DE field with a dateexpiry
6 - Add your own custom fields and confirm it works with several
<custom_patron_field field="EW" template="Phone: [% patron.phone %] Email: [% patron.email %]" />
7 - prove -v t/db_dependent/SIP/Patron.t
8 - prove -v t/db_dependent/SIP/
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ablity to specify a cash register id to link to
payments taken via SIP2 clients.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Rebasing was a nightmare, so I'm squashing the sign off follow-ups to
ease the pain with any future rebases
Includes:
Bug 23051: (follow-up) Refactor renewal code
As per Nick's first point in comment #20, the code that tests for
renewability and renews items has been refactored into it's own
function.
Bug 23051: (follow-up) Provide feedback
For renewals that fail when a fine is being paid off, this patch causes
any errors to be passed back to the template for display.
Addresses the second point in Nick's comment #20
Bug 23051: (follow-up) Fix unit tests
As raised by Nick in comment #35
Bug 23051: (follow-up) Fix/improve feedback
This follow up patch addresses the following parts of Nick's feedback in
comment #35:
- it would be nice to get feedback on what was successfully renewed as well
- In general I think I would prefer to see 'ok' and 'not_ok' returned as
a single 'renewal_results' array
- There is no listing of errors if I use the 'pay' button on an
individual fine
Bug 23051: (follow-up) Refactor methods
This follow up patch addresses the following parts of Nick's feedback in
comment #35:
- I don't really like that the functions are internal functions and then
exported
- I think the pref description should highlight that if 'RenewalPeriodBase'
is set to due date, there may be doubled charges
Bug 23051: (follow-up) Add SIP summary
This follow up patch addresses the following parts of Nick's feedback in
comment #35:
- Ideally SIP would get feedback in a screen message
Bug 23051: (follow-up) Renewing in OPAC
This follow up patch addresses the following parts of Nick's feedback in
comment #35:
- I am also not sure about the code path if a patron paid fines on the
opac (via paypal etc.) but renewals are not allowed on the opac.
We've introduced the syspref RenewAccruingItemInOpac (default is off)
which, when enabled, will cause items attached to fines that are paid
off in the OPAC (via payment plugins), to be automatically renewed.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We should be able to set system preference overrides for SIP in a
similar manner that we do in Apache. It would be great if we could
specify those overrides on both a config level, and login level basis.
Test Plan:
1) Apply this patch
2) Start your SIP server
3) Enable the syspref AllFinesNeedOverride
4) Find or create a patron with a small fine ( less than noissuescharge )
5) Attempt to check out an item to the patron, it should fail
6) Add the global syspref override from the bottom of the example SIP config file
7) Restart your SIP server
8) Attempt to check out an item to the patron again, this time it should work
9) Now, add the login level syspref override section as it appears in
the eaxmple SIP config file. Make sure to add it to the login you are using
10) Attempt to check out another item to the patron, this time is should
again fail
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Some libraries would like to limit the amount of personal information a SIP server sends
to arbitrary parties on a per-login basis.
Test Plan:
1) Add a new key/value pair to one of your existing login stanzas in your SIP config file
For example: hide_fields="BD,BE,BF,PB"
2) Restart SIP
3) Send a SIP message that would normally return those fields ( in this example, a Patron Information Request )
4) Note the response has had those fields removed
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Christopher Davis <tubaclarinet@protonmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Now that we have Koha::Logger, we should use it in our SIP server. This
has the potential to make debugging SIP issue much easier. We should add
the userid for the sipuser to the namespace so we can allow for separate
files per sip user if wanted.
Also modifies the log4perl.conf to lazy-open filehandles to log files,
so the same config can be used with log-files needing different
permissions.
Test Plan:
1) Apply this patch set
2) Update the modififed log4perl.conf to your system
3) Restart your sip server
4) Tail your sip2.log, run some queries
5) Note you still get the same output messages as before, with the
addition of the ip address and username ( if available )
prefixing the message.
Based on original patches by Kyle Hall and additions by Olli-Antti
Kivilahti.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some SIP devices ( in this particular case, bin sorting machines from RFID Library Solutions ) require a CT field to be sent, even if that field is empty. Koha should be able to support this behavior.
Test Plan:
1) Apply this patch
2) Enable the new option ct_always_send for a SIP2 account
3) Restart SIP
4) Check in an item successfully via SIP, which will not be transferred
5) Note the response contains a CT field with no value
Sponsored-by: Pueblo City-County Library District
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some SIP devices ( in this particular case, bin sorting machines from RFID Library Solutions ) require a checkin success to return a CV field of the value "00" rather than no CV field at all. Koha should be able to support this behavior.
Test Plan:
1) Apply this patch
2) Enable the new option cv_send_00_on_success for a SIP2 account
3) Restart SIP
4) Check in an item successfully via SIP
5) Note the response contains a CV field with the value '00'
Sponsored-by: Pueblo City-County Library District
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Many SIP services send an empty password field (AD). Even if allow_empty_passwords is enabled for the given SIP account, this empty password is run though Koha's password checker which increments the number of login attempts for a patron. Thus repeated patron information requests can lock a patron out! Empty password fields in SIP should not call for a password check if allow_empty_passwords is enabled.
Test Plan:
1) Enable a patron password attempt with a limit of 3
2) Send 4 patron information requests with an empty AD field
3) Note the patron's account is now locked
4) Apply this patch
5) Repeat step 2 with a different patron
6) Note the patron's account does not get locked!
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Many services use SIP patron req info to validate a patron against
the koha database. If recording lastseen sites will
also want to record that the user has accessed these
library facilities although they have not logged into koha
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that Patron Info request (63) updates lastseen when the pref has
been enabled.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries need to be able to send additional patron data from the
extended patron attributes in made up SIP2 fields for the patron
information and patron status responses.
Test Plan:
1) Apply this patch
2) Create 3 new patron attributes with the codes CODE1, CODE2, CODE3.
Make a least one repeatable.
3) Create a patron, add those attibutes for the patron, make sure there
are at least two instances of the repeatable code
4) Edit your SIP2 config file, add the following within the login stanza:
<patron_attribute field="XX" code="CODE1" />
<patron_attribute field="XY" code="CODE2" />
<patron_attribute field="XZ" code="CODE3" />
5) Using the sip cli emulator, run patron_information and
patron_status_request messages for the patron
6) Note the values you set for the patron attributes are sent in the
corrosponding fields!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Daniel Mauchley <dmauchley@duchesne.utah.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: added parentheses on line 488 when assigning hashref to array.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some SIP services ( such as Comprise ) require that an attempt at
over-paying a patron's account via SIP2 should fail, rather than create
a credit on the account. We should make this a configurable option on a
per-login basis in the SIP2 config file.
Test Plan:
1) Apply this patch
2) Enable the new parameter
disallow_overpayment="1"
for the login to be used in this test.
3) Restart your SIP server
4) Create or find a patron with fines
5) Attempt to send a payment via SIP for more than what the
patron's balance is
6) Note the response indicates a payment failure
7) Attempt to send a payment via SIP for the account balance or
less
8) Note the response indicates the payment has succeeded
9) Verify in Koha that the payment was processed
Signed-off-by: Rhonda Kuiper <kuiper@roundrocktexas.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Koha's SIP2 server sends the patron's name in the format "Firstname
Surname" which is not very good for machine reading. We need to allow
the format of the patron name to be customized in a manner similar to
what is done with the DA field on bug 16755.
Test Plan:
1) Apply this patch, start or restart your SIP server
2) Find a patron with a first and last name
3) Send a patron information request via the sip2 cli tool
4) Note the AE field has the format "<firstname> <surname>" ( i.e. the current behavior )
5) Add this parameter to the login stanza you are using:
ae_field_template="[% patron.surname %][% IF patron.firstname %], [% patron.firstname %][% END %]"
6) Restart your SIP server
7) Repeat step 3
8) Note the AE field now has the format "<surname>, <firstname>"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <BDaeuber@cityoffargo.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The SIP2 DA field that Koha transmits is an odd and arbitrary format
that some SIP2 clients cannot handle. It would be best if this
format were customizable on a per-login basis in the same manner as
the AV field.
Test Plan:
1) Find an item that is checked out with holds
2) Return the item via SIP2 ( using the SIP2 cli emulator )
3) Note the value of the DA field
4) Apply this patch, restart your SIP2 server
5) Repeat step 2
6) Note the DA field value has not changed
7) Add this parameter to the login stanza you are using:
da_field_template="[% patron.surname %][% IF patron.firstname %], [% patron.firstname %][% END %]"
8) Restart the SIP2 server again
9) Repeat step 2
10) Note the DA field returned is now in the format "$surname, $firstname"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <BDaeuber@cityoffargo.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
With this patch a parameter 'allow_empty_passwords="1" can be added to a
login in the SIP configuration file to allow the behaviour as was normal
before the patch for bug 16610 was applied. Some sip clients rely on
this behaviour sending an empty password field when they wish to
validate to user but do not have the password.
If a password is supplied it will be validated
A test has been added to Message.t to confirm this behaviour
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Resolves:
Use of uninitialized value $payment_type_writeoff in string eq at C4/SIP/Sip/MsgType.pm line 1072, <STDIN> line 2.
Would be raised if this parameter is not found in SIPconfig.xml.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Many SIP2 services such as those by Comprise Technologies are able to or
require that an ILS be able to accept writeoffs via SIP2. The SIP2
protocol specifies that payment type be a two digit number, but does not
specify a code for writeoffs. To this end we should allow the write-off
code to be specified in the SIP2 config on a per-account basis so that
if different vendors use different fixed codes for write-offs we can
handle that gracefully.
Test Plan:
1) Apply this patch
2) Modify your SIP2 config to include
payment_type_writeoff="06"
in the login portion of the account you will be using for the test.
3) Restart your SIP2 server
4) Create a fee for a patron
5) Send a SIP2 fee paid message specifying the payment type code we
defined earlier, with a payment amount that is *not* equal to the
amount outstanding for the fee.
6) Note the fee paid response indicates the payment failed
7) Repeat step 5, but this time send the amount outstanding as the
payment amount
8) Note that the fee paid response indicates a successful payment
9) Note in Koha that the fee has been written off!
Signed-off-by: Rhonda Kuiper <kuiper@roundrocktexas.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This small patch corrects the SIP2 checkin response if branch transfer is needed.
It depends on bug 7981 and also removes an obsolete alert check in SIP2.
Test plan:
- apply bug 7981
- make sure syspref AutomaticItemReturn is false
- check 'Return policy' in 'Default checkout, hold and return policy'
- make a SIP2 checkout and checkin from a branch different than item's home branch.
- verify that SIP2 response gives alert CV04 (=send to different branch)
- also verify that response field CT gives correct branch according to 'Return policy'
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Moving timeout logic to one routine (with unit test).
This further implements two suggestions from Kyle and Larry:
[1] You could use a client_timeout of 0 to specify no timeout at all.
[2] Have the client_timeout default to the timeout if not defined.
Test plan:
[1] Run t/db_dependent/SIP/SIPServer.t.
[2] Test login timeout for raw and telnet.
[3] Check ACS status message for timeout value. Should match policy
timeout from institution.
[4] Test client timeout (zero and non-zero).
[5] Remove client timeout. Test fallback to service.
[6] Remove service timeout too. Test fallback to 30 at login.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended to incorporate Srdjan's suggestion to move get_timeout to
SIPServer.pm; this requires some additional mocking in the unit test.
And even makes the test db dependent, as documented.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If you enable send_patron_home_library_in_af in your sip account, you
want a separate AF field for the home branch.
Test plan:
Send a 63 (Patron Info) and verify that you have an extra AF.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested Patron Status and Patron Info.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Removes a warn and some commented warns.
Test plan:
Nothing to do here. Will be covered later by additional unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Koha's SIP2 server should have support for the AV field ( field items ).
The biggest problem with this field is that its' contents are not really
defined in SIP2 protocol specification. All it says is "this field
should be sent for each fine item". Due to this, I think the contents of
the field need to be configurable at the login level, so that the
contents can be defined based on the SIP2 devices requirements for the
AV field.
Test Plan:
1) Apply this patch
2) Find a patron with outstanding fines
3) Run a patron information request using misc/sip_cli_emulator.pl using the new -s option with the value " Y "
4) Note there is an AV field for each fee containing the description and amount
5) Edit your sip config, add an av_field_template parameter to the login you are using such as
av_field_template="TEST [% accountline.description %] [% accountline.amountoutstanding | format('%.2f') %]"
6) Restart your SIP server
7) Repeat the patron information request
8) Note your custom AV field is being used!
Signed-off-by: Chris Davis <cgdavis@uintah.utah.gov>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^(use vars .*)\$VERSION\s?(.*)/$1$2/' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When you are ready, you still see that small detail.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Conform QA comment, Patron Info request is slightly adjusted to be
consistent with changes to Patron Status request.
If the cardnumber is ok and the password is wrong, BL=N is reported but
also add 'Invalid password' in AF.
Additionally, an invalid card number is reported in AF.
Test plan:
[1] Send patron info request for invalid card.
[2] Idem for valid card, no password.
[3] Idem for valid card, good password.
[4] Idem for valid card, wrong password.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified by telnetting SIP server.
And tested additionally with the new unit test of bug 15956.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Conform QA comment on Bugzilla, we do this:
[1] Attribute for overdrive mode/invalid credentials is not really needed.
We can always pass a screen message that card or password is invalid.
[2] If the cardnumber is correct and the password is wrong, we should
still honour the request. The bad password is recognized by BLN and
an additional message in AF.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified by telnetting SIP server.
And tested additionally with the new unit test of bug 15956.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
NOTE: apply this patch after the additional perltidy patch
this patch is basically a small work-around to fix some confusing login text,
when users enter incorrect auth details via Overdrive's website
with this option disabled (default) there is no change to SIP's behaviour
to test...
1/ configure your overdrive account to talk to your Koha's SIP service
2/ start Koha's SIP
3/ enter a correct username and correct password in overdrive
see overdrive display '(1) Greetings from Koha' (good)
4/ enter a correct username and *incorrect* password in overdrive
see overdrive display '(1) Greetings from Koha' (bad)
5/ enter an incorrect username in overdrive
see overdrive display '(1)' (badder)
6/ apply patch, enable 'overdrive-mode' in Koha's SIPConfig.xml
example...
---------------------
<accounts>
<login id="kohasip" password="xxxxx" delimiter="|"
error-detect="enabled" institution="YYY" overdrive-mode="1" />
</accounts>
---------------------
7/ restart SIP
8/ enter a correct username and correct password
see overdrive display '(1) Greetings from Koha'
9/ enter a correct username and *incorrect* password
see overdrive display '(1) Invalid patron or patron password'
10/ enter an incorrect username and incorrect password
see overdrive display '(1) Invalid patron or patron password'
http://bugs.koha-community.org/show_bug.cgi?id=1387
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The original perltidy patch from Mason has been amended.
The perltidy itself has been moved to a separate patch with the current
perltidyrc applied.
As noted on Bugzilla, the original perltidy patch included some extra
changes:
[1] You prefix timestamp with Sip
This is not actually needed (it is imported), but if we should prefix it,
we should prefix now with C4::SIP::Sip. But you only changed two
occurrences (out of 26). So I remove these two changes.
[2] You remove the $server parameter from two calls of maybe_add:
A closer look at the remaining code tells me that $server is always
passed to maybe_add for FID_SCREEN_MSG. So this only left me the
current whitespace change.
But at least we documented what we did or did not, and why..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Run perltidy pro=xt/perltidyrc on the file.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Calling UNIVERSAL's internal methods will cause a depreciation
warning in perls less that 5.22 as of 5.22 the warning is a fatal
error causing compilation to abort
Replace the use UNIVERSAL with UNIVERSAL::can to work around the
buggy construct perldoc UNIVERSAL::can for more info
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more worning/error
No qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If an item is not checked out when a checkin via SIP2 is attempted,
Koha's SIP server sends back an "ok" of 0, and the AF message "Item
not checked out". I am not entirely sure this is good and correct
behavior by the SIP2 protocol.
In particular, this will cause SIP2 book sorting devices to fail on
all items that are not checked out, causing them all to be put into
the "special handling" been that should be reserved for things like
items checked in at the wrong library and items on hold.
Test Plan:
1) Apply the patch for bug 13159 so you can use the new enhanced
SIP2 command line emulator
2) Use a command similar to the following to check in an item:
sip_cli_emulator.pl -a localhost -su <sip user> -sp <sip password> -l <instituation id> --item <barcode> -m checkin
3) Note the 3rd character is 0, and there is an AF field saying the item is not checked out
4) Apply this patch
5) Restart the SIP server
6) Repeat steps 2-3, note that nothing has changed
7) In the SIP config file, Add the parameter checked_in_ok="1" to the SIP account you are using.
8) Restart the SIP server
9) Repeat steps 2-3, note that this time the 3rd character is 1, and you do not recieve the item not checked out message.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Most of them were found and fixed using codespell.
Fix also some related grammar issues.
In C4/Serials.pm a variable was renamed to make future codespelling
checks easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
http://bugs.koha-community.org/show_bug.cgi?id=14383
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Implement correct handling of fees associated with checking out
an item.
This is associated with fee acknowledged field (BO)
To quote from the Sip2 document
" If this field is N in a Checkout message and there is a fee
associated with checking out the item, the ACS should tell the
SC in the Checkout Response that there is a fee, and refuse to
check out the item. If the SC and the patron then interact and the
patron agrees to pay the fee, this field will be set to Y on a second
Checkout message, indicating to the ACS that the patron has acknowledged
the fee and checkout of the item should not be refused just
because there is a fee associated with the item"
So there are two Checkout requests the first with BO not set to Y is
rejected but the fee amount is returned. The Second Checkout with BO set
to Y should succeed.
Added a debug log message indicating why we block a checkout
when we dont otherwise indicate
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sip::Configuration calls new on Account, Institution and Service
classes but does not store or subsequently use the returned objects
( which immediately go out of scope ). Their existence just obscures
the code and misleads the reader. Remobe them
Removed redundant commented out code from Configyration module which
was not serving any useful purpose
Ran Configuration.pm through perltidy to make layout more
consistent
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For historical reasons the SIPServer and SIP modules
have used an extra module path in addition to the
standard Koha one. This has caused numerous irritants
in attempting to set up scripts and basic tests. It
does not help in attempting to modify or debug
this code
This patch changes the package value in the modules
under the C4/SIP directory and makes calls to
them use the full package name.
Where the export mechanism was being short circuited
routines have been explicitly exported and imported
declarations of 'use ILS' when that module was
not being used and which only generated warnings
have been removed.
As a lot of the changes affect lines where
an object is instantiated with new. The opportunity
has been taken to replace the ambiguous indirect
syntax with the preferred direct call
In intializing ILS the full path is added as this
will not require any changes to existing configs.
I suspect this feature is unused, and adds
obfuscation rather than flexibility but have kept
the feature as we need this change in order to
rationalize and extend the testing of the server.
The visible difference is that with the normal Koha
PERL5LIB setting. Compilation of Modules under C4/SIP
should be successful and not fail with unlocated modules,
allowing developers to see any perl warnings
All the SIP modules can now be run through the tests
in t/00-load.t now except for SIPServer itself
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The SIP config has allowed you to specify an interface ip as
part of the listeners/service/port attributei
e. g. as port="127.0.0.1:6001/tcp"
with IPv6 the equivalent would normally be
as port="[::1]:5001/tcp"
However in this case incoming connections will get rejected because
Configuration constructs a string without the brackets
This patch makes tests both formats on incoming connections so that
they are accepted as they were previously
In future the best course is not to include a port identifier in the
port definition then if the server has ipv6 it will bind to all
interfaces and accept both IPv4 and IPv6 traffic
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We should add the ability to apply a regular expression to screen
messages for the SIP2 server. This would allow libraries to not only
customize the screen messages the patron sees, but can also allow screen
messages to be translated.
Test Plan:
1) Apply this patch
2) Inspect etc/SIPconfig.xml, note the new screen_msg_regex tags
that can be nested inside a given login tag.
3) Add one or more screen_msg_regex tags to your own SIP config
Recommendation: s/Greetings from Koha./Welcome to your library!/g
4) Restart your SIP2 server
5) Test with a SIP2 machine, or use /misc/sip_cli_emulator.pl
6) Note your new AF fields!
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
