The patch for bug 33575 was carelessely applied so
the holds section was overwritten by a duplicated
section which cause the table configuration for
the holds-to-pull table to be missing.
Test plan:
* Place a hold on a record that has items (so there is at least one hold to pull)
* Go to the page "holds to pull" and verify that the column settings are present
to the left above the table (<cog wheel icon> Columns).
NOTE: the column settings are cached, so you need to reset memcached
between tests if you want to test with and without the patch.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 38875e920d)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Since (a long time ago!)
commit 62aa3f4292
Bug 17216: Use Koha::AVC from mss.pl
This $sth2 is never fetched, we are retrieving the AV cat using
Koha::AV::Categories
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4158783eb2)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Currently the index `pl` points to 008/15-17. It should
(additionally/instead?) point to 260a and/or 264a.
Test plan (for koha-testing-docker with ElasticSearch via `ktd --es7 up`)
Verify the old/broken behaviour:
* Go to Staff/Advanced Search
* Select "Publisher Location" and enter "cau", start search
* You will get some hits (~16), eg "Perl best practices / Damian Conway", which has 008 of "051222s2005 caua b 001 0 eng d" with "cau" on 15-17
* Edit this record (cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber=5)
* Inspect 260$a, which should containt "Sebastopol, CA :"
* Go back to Advanced Search and search for "Publisher Location" = "Sebastopol"
* No hits!
Apply the patch!
* exit ktd and stop it (ktd --es7 down; ktd --es7 stop)
* start it again
* Go to Staff / Administration / Search Engine Config (Elasticsearch)
* Click on the Tab "Bibliographic records" and search/filter for "pl"
* you should see 3 entries for "pl", with Mapping values of "008_/15-17", "260a" and "264a"
* Go to Search,
* Select "Publisher Location" and enter "cau", start search
* same hits as befor
* Search again, but for "Sebastopol"
* Now you'll get 9 hits!!
Bonus: Test 264a
* Got to Admin / MARC bibl framework, select BKS -> MARC structure
* search for tag "264", edit subfields
* in tabs a, b, c: Check the "Editor" Checkbox (Visibility)
* Save changes
* find a book, eg again "Perl best practices" and edit it
* find field 264 and enter "Test" into 264a, Save
* Depending on your setup, you might have to manually re-index the book:
* enter ktd: ktd --shell
* reindex the one book (via --bn) or all (might also need a -d)
/usr/share/koha/bin/search_tools/rebuild_elasticsearch.pl -v -b -d
* Go again to Advanced Search, Publisher Location = "Test"
* You should find the book
If your NOT running ktd, you might be able to just edit the ElasticSearch Mappings to add / change the mapping for "pl" to point to "260a".
One rather harsh way to do this (which I needed to do, because the ES Mappings UI did not work for me) is via this SQL:
update search_marc_map set marc_field='260a' where marc_field='008_/15-17';
Sponsored-by: Steiermärkische Landesbibliothek
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit df9bc0b86a)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It seems that we loop all categories and item types to build the circ
matrix. We should only loop over values that have actually been used
in circulation rules.
Test Plan:
1) Create 1000 itemtypes and category codes. You can use the following
script:
use t::lib::TestBuilder;
my $builder = t::lib::TestBuilder->new();
$builder->build( { source => 'Category' } ) for 0..1000;
$builder->build( { source => 'Itemtype' } ) for 0..1000;
2) Note the lengthy load time for smart-rules.pl
3) Apply this patch
4) Restart all the things!
5) Reload the page
6) Note the much faster load time!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4e04ff28b6)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Adding or editing following columns in circulation
rules table didn't work:
- Holds allowed (total)
- Holds allowed (daily)
- Holds per record (count)
At some point those columns were dropped from list of
saved columns in smart-rules.pl.
To test:
1. Create new rule or edit existing one.
2. Add or change values in following columns:
- Holds allowed (total)
- Holds allowed (daily)
- Holds per record (count
3. Save rule.
=> Note that columns have value "Unlimited" on them.
If you check database, columns haven't been saved.
4. Apply this patch.
5. Repeat steps 1. to 3.
=> Columns should now have values in them and they
are saved to database.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit ca27b5adb0)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Make some holds on a record and make sure some are set to expired.
2. Go to to reserve/request.pl?biblionumber=X for the biblionumber
3. Try updating something besides the expiration date. i.e. Pickup library
4. Click Update hold(s)
5. Notice the expirated holds have lost their expiration date.
6. APPLY PATCH
7. Try steps 2-4 again, this time the expiration date shold be retained.
8. Make sure Table settings still work and you can properly hide columns.
9. The hold expiration date should be hide-able.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need to add scalar to the calls. These parameters are not meant
to be used as multi_param.
Test plan:
Try With and without this patch on staff:
Try: /cgi-bin/koha/admin/columns_settings.pl
=> WITHOUT: No warnings
=> WITH: Same. No change.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&page=basket
=> WITHOUT: Opens module, scrolls down. CGI::param called in list context in logfile
=> WITH: Opens module, scrolls down.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&page=basket&table=orders
=> WITHOUT: Opens module, scrolls down. CGI::param called in list context in logfile
=> WITH: Opens module, scrolls down.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&module=admin
* Hash like: panel => acqui, admin => page, undef => table, undef => modules, $modules (SHIFTED)
=> WITHOUT: Acqui expanded showing: There is no page using the table configuration in this module.
=> CGI::param warning in log.
=> And: Problem = a value of table has been passed to param without key
=> And: Problem = a value of modules has been passed to param without key
=> WITH: Only the first module (Acqui) should be expanded.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&module=admin&page=basket&table=orders
* Hash like: panel => acqui, admin => page, basket => table, orders => modules, $modules hash (SHIFTED)
=> WITHOUT: Acqui expanded showing: There is no page using the table configuration in this module.
=> And: CGI param log warning.
=> WITH:: Opens Acqui. Second module ignored. Scrolling.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=admin&module=acqui&page=basket&table=orders
* Hash like: panel => admin, acqui=> page, basket => table, orders => modules, $modules hash (SHIFTED)
=> WITHOUT: Admin expanded showing: There is no page using the table configuration in this module.
=> And: CGI param log warning.
=> WITH: Admin should be expanded (page and table ignored, not in Admin). No scroll.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves form any staff_searchable attribute being automatically
included in the the Standard patron serch, to allowing the librarian to choose.
Current searchable attributes will be marked as 'searched_by_default'
To test:
1 - Add a searchable patron attribute type
2 - Add some values
3 - Confirm they are searched in a 'Standard' patron search
4 - Apply patch
5 - Go to admin - >patron attribute types
6 - Note new 'Searching' column
7 - Confirm attribute is 'Searched by default'
8 - Confirm searches work as before
9 - Edit the attribute type
10 - Uncheck 'searched_by_default'
11 - Save
12 - Confirm attribute not searched in 'Standard' search
13 - Select the attribute in patron search dropdowns
14 - Confirm it is correctly searched
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Create enough holds on items so that they will appear on the holds ratio report.
2. Visit circ/reserveratios.pl by going to Circulation > Holds ratios
3. No collection column.
4. Apply patch and restart services
5. Look again at circ/reserveratios.pl, now you should see a collection column.
6. Ensure that the data in the column looks correct.
7. Go to Administration > Table settings to ensure you can hide that column, and other columns in the table.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Thank you Jonathan. I first tried with '||' but it would fallback to 1
for either undef or 0 (we want the first case, but not the second).
But using '//' instead, it only falls back to 1 if undef, and not when 0.
Today I learned between '||' and '//'! Thanks!
From perldoc.perl.org (relating to '//'):
'In fact, it's exactly the same as ||, except that it tests the left hand
side's definedness instead of its truth.'
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If ILLModule sys pref is 'off', this input param is undef. The database does not allow it to be nullable causing an error.
Check if its defined (i.e. the option was submitted) and use that, if not default to 1
Test plan, k-t-d:
1) Edit an existing patron category, visit:
/cgi-bin/koha/admin/categories.pl?op=add_form&categorycode=B
2) Click 'Save' at the bottom of the form
3) Notice a yellow box is shown with an error message
4) Apply patch. Repeat steps 1-3. Notice it now updates successfully.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. In the Administration module, create an Additional Field that is
not linked to an authorized value
2. Create another Additional Field that is linked to an authorized
value
3. Access the database in the command line (koha-mysql kohadev)
4. Select all from additional_fields
5. Confirm that each field correctly lists either the appropriate
authorized value, or NULL
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
- Enable ILLModule sys pref and install any backend, or run
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
- Verify you can place new ILL requests in OPAC and Intranet
- Apply patch
- In borrower categories, verify there's a new column for 'can place ILL in opac' and is set to 'yes' by default
- Edit your borrower's patron category and set 'can place ILL in opac' to 'No'
- Verify you can no longer place new ILL requests in OPAC
- Verify you also cannot place new ILL requests through URL:
:8080/cgi-bin/koha/opac-illrequests.pl?method=create&backend=FreeForm
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Add +x to atomic database update file
* Perltidy
* Add spans to rewritten tab label for translatability
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
So that pickup delay can have a different value per patron category,
item type or branch.
To test:
1) Update database, restart services
2) Set ReservesMaxPickUpDelay syspref (if not already set)
3) Edit your circulation rules and set a value under 'Holds pickup
period (day) that is DIFFERENT from ReservesMaxPickUpDelay. Set a few
different numbers for different branches as well.
4) Place a hold on a biblio from the staff client.
5) Check in an item from that biblio and confirm the hold as waiting
6) Confirm the expiration date is calculated using the 'Holds pickup
period' value instead of the ReservesMaxPickUpDelay syspref
7) Revert the waiting status and delete the hold
8) Re-place the hold on the biblio on the OPAC. Notice that when you
change the pick up location, the number of days in the pickup message
below the dropdown changes based on the circ rules.
9) Create a holiday with a date that will overlap with the 'Holds pickup
period'
10) Check in an item from that biblio and confirm the hold as waiting
11) Confirm the expiration date is calculated using the 'Holds pickup
period' value AND considers the special holiday
12) Confirm tests pass t/db_dependent/Holds/WaitingReserves.t
13) Test Talking Tech:
13a) Enable TalkingTechItivaPhoneNotification
13b) Go to Tools -> Notices & slips. Add content to the HOLD phone
(itiva) notice.
13c) In your terminal, run perl
/path/to/koha/misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl -o
~/itiva.tmp -w 0 --type=RESERVE
Sponsored-by: Catalyst IT
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have a record with several holds on it.
2. Go to the holds page for that record ( /cgi-bin/koha/reserve/request.pl?biblionumber=144 )
3. Cannot sort by columns
4. Apply patch, restart_all
5. Now the table should be a dataTable that will allow you sort.
6. Try hiding columns by clicking on the 'Columns' icon above the table, make sure columns are correctly being hidden.
7. Try to hide columns by going to Adminstration > Table settings ( Circulation > Holds > patron_holds_table ), make sure columns are correctly being hidden.
8. Now login with a user who has the 'place_holds' permission but does NOT have the 'modify_holds_priority' permssion.
9. The table will not have the change priority columns. Make sure all columns can still be hidden/shown correctly for that use.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jessica Zairo <jzairo@bywatersolutions.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch finally adjust the default mappings to add a new field to
the elastic index with the title stripped of punctuation
This method optionally allows the library to place the filtered version in the same
search field, or a new search field. The default mappings will include the filtered version
in a keyword search, but not a targeted search
To test:
1 - Import some affected records via z3950, e.g.:
Carrie's war
1,000 Japanese words
2 - Search (using Elasticsearch) for the titles without including punctuation
Carries war
1000 Japanese words
3 - No results
4 - Reload mappings and reindex
perl misc/search_tools/rebuild_elasticsearch.pl -v -r
5 - Search again
6 - Success!
7 - Search title specifically:
ti:Carries war
8 - No results
9 - Adjust mappings.yaml to add second mapping for 245 to title index:
- facet: ''
marc_field: 245abp
marc_type: marc21
sort: 1
suggestible: 1
filter: punctuation
10 - Reload mappings and reindex
11 - Repeat 7
12 - Success
Signed-off-by: Danielle M Elder <danielle.elder@law.utexas.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new column to the 'Bibliographic records' tab in
Administration > Search engine configuration (Elasticsearch)
To test:
1 - Confirm the new 'filter' column shows
2 - Update an existing field to set filter to punctuation
3 - Confirm it can be saved
4 - Add a new field
5 - Confirm it saves correctly
6 - Unset filter for a field
7 - Confirm it saves
Signed-off-by: Danielle M Elder <danielle.elder@law.utexas.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch renames the table in the columns configuration to match the id
used in the templates
It also adds a section for the moremember table to alllow config of each page as we do for issues
Lastly we add the table controls as they exist on the issues tables
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the holds table on circulation and moremembers to use
table settings and hides the note column by default to preserve existing views
To test:
1 - Apply patch
2 - Enable system preferece 'OpacHoldNotes'
3 - Place a hold on the opac and enter a note
4 - Confirm it shows on the patron's page
5 - View the patron in staff client
6 - Ensure the holds note does not display on Holds tab in Checkout or Details view
7 - Go to Admin->Table settings->Circulation
8 - Under holds_table confirm 'notes' is hidden by default
9 - Uncheck the box
10 - Refresh patron pages and confirm hold note shows
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch, restart_all
2. Check some items out and prepare some reasons that would initiate a branchtransfer. According the schema it can be any of the following: 'Manual', 'StockrotationAdvance', 'StockrotationRepatriation', 'ReturnToHome', 'ReturnToHolding', 'RotatingCollection', 'Reserve', 'LostReserve', 'CancelReserve', 'TransferCancellation', 'Recall', 'RecallCancellation.
3. CHeck in some the items and notice the 'Transfer reason' column in the table. Make sure the reasons are acurate and make sense.
4. To go Table settings and find the 'checkedintable'. Make sure you can properly hide the column from the display.
Signed-off-by: AndrewA <andrew.auld@ptfs-europe.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the late orders page so that the table of
information contains a column for basket creation date. This will allow
administrators to configure the table to sort by default on basket
creation date if they wish.
To test, apply the patch and restart services.
- Go to Acquisitions -> Late orders.
- The table of late orders should include a column labeled "Basket date"
showing the basket creation date.
- The dates should be formatted correctly and the column should sort
correctly.
- Go to Administration -> Table settings and navigate to the settings
for the lateorders page.
- Try changing various settings for the table to confirm that everything
works correctly, including setting the default sort to use the basket
date column.
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 32721: (QA follow-up) Rename fields to opac*
This patch updates the field names to reflect that they're OPAC
related.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 32721: (QA follow-up) Fix rebase errors
We let some superflous template params creep back in during a rebase
somewhere.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows for branch specific userJS and userCSS to be added through the libraries table. This works in conjunction with the global UserJS and UserCSS functionality and allows for multiple OPACs with different css and js options.
Test plan:
1) Add to apache conf (/etc/apache2/sites-available/kohadev.conf)
SetEnv OPAC_BRANCH_DEFAULT "FFL"
RequestHeader add X-Koha-SetEnv "OPAC_BRANCH_DEFAULT FFL"
2) In the container, run restart_all
3) Navigate to the OPACUserJS and OPACUserCSS system preferences and add the following: OPACUserJS - console.log('Hello from global sysprefs');, OPACUserCSS - 'body { background-color: black; }'
4) Refresh the OPAC and the background should be black and the message should be logged to the console in developer tools
5) Navigate to Administration > Libraries
6) On the Fairfield branch (if this does not exist you will need to create a branch with a code matching the code that you added to the apache conf file), click edit
7) At the bottom there should be two fields to add userjs and usercss, complete with Codemirror syntax checking
8) In userjs add console.log('Hello from branch level'); and in usercss add 'body { background-color: blue; } then save
9) Return to the OPAC and refresh
10) If you are logged out of the OPAC it should now be logging both the message from global and from the branch level and the background should be blue (if not you will need to log out)
11) Log back into the OPAC using a user that DOES NOT have a default branch matching the branch you added to the Apache conf
12) The OPAC should now revert to only showing the global message in the console with a black background
Sponsored-by: PTFS Europe
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the item search fields
administration page, making sure the page title, breadcrumb navigation,
and page headers are consistent with each other.
The patch makes some changes to the way new item search fields are added
in order to keep the display consistent with other similar interfaces:
The "add" form is no longer shown dynamically from the page listing item
search fields. Clicking the "New search field" toolbar button will now
take you to the same template used for editing existing search fields.
This allows us to put the correct context into page title, breadcrumbs,
and headings.
To test, apply the patch and go to Administration -> Item search fields.
Test the process of adding a new search field and editing an existing
search field.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- UI adding support for batch statuses in batch UI
- Admin UI for managing batch statuses
- API specs
Co-authored-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Edith Speller <Edith.Speller@ukhsa.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- Add batch column to requests table
- Establish if there are any availability or metadata enrichment plugins and pass that to the template
- Verify if we have any backend that can support batches, if not, don't show the option
- Updates to the ILL toolbar
- New ILL batch modal
- New Koha classes
- API specs
Co-authored-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Edith Speller <Edith.Speller@ukhsa.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries debar Patrons at the end of the year for having unpaid fines,
like in Bug 15157. Currently librarians have to manually remove this type of
debarments after Patron has paid his/her fines.
This patch adds ability to create restrictions which are lifted after
patron pays ceratain amount of fines.
To test:
1. Apply this patch.
2. Restart your services if needed.
3. Navigate to page restrictions.pl.
=> Note that table has two new colums in it, "Lift after payment?" and "Fee limit".
4. Add new restriction which has "Lift after payment?" set
as Yes and fee limit as 5.
5. Create fees for a patron so they exceed fee limit e.g. 10
6. Add restriction made in step 2. for the patron
7. Pay patrons fees partially so that they go under fee limit
=> Note that patrons restriction should now be lifted.
Also prove t/db_dependent/Patron/Borrower_Debarments.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the system preferences interface so that preferences
which ask for a single authorized value can offer a dropdown menu of
choices instead of a text field.
The patch also updates a few existing preferences to use the new
feature: BundleLostValue, BundleNotLoanValue, and
ClaimReturnedLostValue.
To test, apply the patch and restart services.
- Go to Administration -> System preferences and search for "authorized
value."
- The search results should include the entries for BundleLostValue,
BundleNotLoanValue, and ClaimReturnedLostValue.
- Confirm that the dropdowns show the correct authorized value category
(LOST or NOT_LOAN)
- Confirm that setting or unsetting each of the preferences works
correctly.
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the MARC bibliographic
framework administration page, making sure the page title, breadcrumb
navigation, and page headers are consistent with each other.
The file admin/marc_subfields_structure.pl is modified so that it
provides the framework name to the template.
Test each page to confirm that page title, heading, and breadcrumbs are
consistent:
- MARC bibliographic frameworks
- New framework
- Edit framework
- Delete a framework which is not used
- Delete a framework which is in use
- Framework MARC structure
- New tag
- Edit tag
- Delete tag
- View subfields
- Edit subfields
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adds the ability to easily place a hold on an ordered item from a basket
To test:
1) Apply patch
2) Go to acquisitions
3) Go to an existing basket, or create a new one
4) Add an order to the basket
4) Notice there is a "Place hold" column in the Orders table
5) Click the link for an item which allows you to place a hold easily on the biblio
6) On the columns settings, toggle the "Place hold" column to hide it, and make sure it gets hidden
Sponsored-by: Pymble Ladies’ College
Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 22284 introduced ability to create hold groups.
We should have ability to create float groups in
same manner. This patch adds checkbox "Is local
float group" to group creation feature and new return
policy "Item floats by librarygroup".
To test:
1. Add new float group and some libraries to it.
2. From circulation and fine rules, set default
return policy as "Item floats by library group".
3. Check out an item for a patron.
4. Set library as one that belongs in the same
float group.
5. Check in the item.
=> Observe that notice for transfer doesn't pop up.
6. Check out again.
7. This time set library as one that doen's
belong in the same float group.
8. Check in.
=> Observe that notice for transfer pops up.
Experiment this feature by changing return policy
per library, item type etc.
Also prove t/db_dependent/Koha/Libraries.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the requirements that updating a system preference
requires a CSRF token. (Also, adding and deleting local system preferences.)
0. Apply patch
1. koha-plack --reload kohadev
2. Add local system preference
3. Update local system preference
4. Delete local system preference
5. Update normal system preference
6. Note no errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At the moment it's quite a lot of clicks to get from the basket
summary to the invoice something was received in. This adds a nice
shortcut by creating a new column for the invoicenumber in the basket
summary table.
To test:
* Make sure you have a basket with some received and unreceived
order lines
* Verify that the (received) shows for your received lines
* Verify no invoice number or link to it in sight
* Apply patch
* Verify that there is now a column for the Invoice containing
the invoice number as a link to the invoice
* Test with a staff patron, that doesn't have edit_invoices permission
* Verify that now instead of a link you see the invoice number as text
Be happy, sign off ;)
Note: this doesn't change the CSV export. The way the CSV is built is
quite different to the summary table, so it would be better handled
in a separate bug/patch. The columns are already quite different!
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Émily-Rose Francoeur <emily-rose.francoeur@inLibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the option to display sort1 and sort2 columns in the
view of the contents of a basket in acquisitions. The columns are
labeled "Statistic 1" and "Statistic 2" to match the labels in the
order creation/edit form.
The fields are hidden by default in the updated table configuration.
To test, apply the patch and restart services.
- Go to acquisitions and create a basket if necessary:
- Search for a vendor and click New -> Basket from the vendor
toolbar on the vendor search results screen.
- Create a basket, then click "Add to basket" from the basket details
page.
- Add an order to the basket.
- With at least one order in the basket, check the table of orders in
the basket.
- The columns should be unchanged.
- The table configuration button should show the two statistics fields
as hidden. Test that they can be displayed.
- Go to Administration -> Table settings.
- Under Acquisitions -> basket, try changing the settings for the
Statistic 1 and Statistic 2 fields, and check that your changes are
reflected in the basket view.
- Test with a vendor which has an EDI account:
- Enable the EDIFACT system preference.
- Go to Administration -> EDI accounts and create an account for your
vendor.
- Confirm that the table of orders in your basket still displays
correctly now that the "Supplier report" column is present.
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Ray Delahunty <r.delahunty@arts.ac.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The first column was named basket_number, but it's actually the
order_line.
To test:
* Edit column configuration for acquisition > basket
* Make sure to set at least one checkbox for 'basket_number'
* Apply patch, run database update
* Verify that the first column is now 'order_line', but your
settings have been preserved
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At some point the option for 'undef' was removed from te sort options
and was collapsed to yes/no
The dropdowns when adding a new field were missed, this patch corrects that.
While undef in a mappings file wil stil load, when saving we should not privde undef any longer
To test:
1 - Browse to bottom to add a new field on the 'Bibliographic records' tab in
Administration > Search engine configuration (Elasticsearch)
2 - Set sortable column to undef, set other columns and provide a valid field
3 - Click '+Add'
4 - Click 'Save'
5 - At top of page you receive an error:
An error occurred when updating mappings: DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Column 'sort' cannot be null at /kohadevbox/koha/Koha/SearchField.pm line 37 .
6 - Apply patch, restart all
7 - Add a new mapping, your only choices are Yes/No
8 - Save mapping
9 - Confirm it saves correctly
Signed-off-by: Salah Ghedda <salah.ghedda@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
