Commit graph

54 commits

Author SHA1 Message Date
Maryse Simard
2fcc16b62c
Bug 17674: Handling of special cases
This patch adds handling for those 2 particular cases:
1. Deleting the expected issue
2. Deleting a serial and it's item, but one item cannot be deleted

To test:

1.1 Create a subscription that creates items
1.2 Receive two issues
1.3 Use the new button to delete the 'Expected' issue
1.4 The issue is correctly deleted, but the new expected issue created
to replace the one which has been deleted don't have a published or
received date and is show in it's own tab.
1.5 Apply patch
1.6 Repeat steps 1.1 through 1.4
    => The new expected issue is created correctly

2.1 Use the same serial as in 1 or repeat step 1.1 and 1.2
2.2 Check out one of the items
2.3 Delete the corresponding serial and check box to delete items
2.4 The serial is deleted, but not the item.
    => No feedback is show to the user
2.5 Apply patch
2.6 Repeat step 2.1 through 2.4
    => As before, the serial is deleted, but not the item
    => This time, an error is shown to inform the user

Signed-off-by: sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2020-03-19 09:31:02 +00:00
Pierre-Marc Thibault
6cb8c9e4e9
Bug 17674: Allow UI to delete serials in batch
This new feature allows for batch deletion of serials through the UI.  The current usage is a one-by-one long game.

Test plan :
- Apply patch.
- Create at least four serials with items.
- Notice that new items have a numbering pattern and a date in the enumchron field.
- Use the button Delete selected issues for the following steps.
- Delete a serial and its associated item.
- Confirm the serial and item are gone.
- Delete a serial and not its item.
- Confirm the serial is gone.
- Confirm the item is still there and the date part in the enumchron field is gone.
- Delete the two lasts serials.
- Confirm they are gone.

Sponsored-by: CCSR
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2020-03-19 09:30:38 +00:00
Katrin Fischer
2455286da4
Bug 23126: Remove more unnecessary linebreak processing from serial collection
This should have no visible effect on the templates as the
information the grep changes is not used in the template.

It's also strange, that these lines existed, as
GetSubscriptionsFromBiblionumber contained the same changes.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Arthur Bousquet <arthur.bousquet@inlibro.com>
Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2019-06-25 17:18:22 +01:00
Aleisha Amohia
ac423d5dcf
Bug 11492: (follow-up) Don't pass publisheddatetext param to NewIssue
I have removed publisheddatetext as a param from my patch, but only in
the places where my patch added it. Any other instance already existed
before my patch.

Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2019-06-04 09:33:04 +01:00
Aleisha Amohia
2c25016a8e
Bug 11492: Keep routing notes when receiving next serial
This patch ensures the routing notes are carried over when generating
the next serial.

To test:
1) Create a routing list for a subscription
2) Add a borrower and a note to the routing list
3) Generate the next serial (serials-collection.pl)
4) Edit the routing list to see the notes
5) Note that the notes have disappeared
6) Apply patch
7) Edit the routing list, add a note
8) Generate the next serial
9) Edit the routing list and confirm the note is still there
10) Confirm you are still able to edit serials (serials-edit.pl) and
routing notes stay

Sponsored-by: Plant and Food Research Limited
Signed-off-by: Nazlı Çetin <nazli@devinim.com.tr>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
2019-06-04 09:32:48 +01:00
Baptiste Wojtkowski
cb01b25330 Bug 17047: SQL reports management with Mana-KB
Includes:

* code factorization
Some code from subscription & Mana-KB has been factorized in order to speed-up next developments

* SytemPreferences:
Mana Activation:
    - add a value "no, let me think about it", that is the default value.
    - as long as this value is selected, messages ask if user want to activate it ( in Administration and Add-subscription(page 2) )
AutoShareWithMana
    - Add the syspref AutoShareWithMana: user can automatically share infos with Mana-KB (not set by default)

* Interface :
    - On mana-search, rows are now sorted by date of last import, then by number of users
    - Windows redesigned to improve the user experience

* New Feature : report a mistake.
    - people can now report an invalid data (wrong, obsolete,...)
    - if a data is reported as invalid many time, it will appear differently
    - Added few tooltip (to explain the fields last import, nb of users, to explain the new feature)
    - When reporting a data as invalid, a comment can also be added. Koha will then display comments related to data in result lists

* API (svc/mana)
    - add svc/mana/addvaluetofield: allows to ask mana incrementing a field of a resource
    - no hardcoding for resources in the code of api (api needs to be called with a ressourcename)

* New feature : SQL report sharing
    - Create Koha::Report.pm and Koha::Reports.pm, objects class for Reports
    - New feature: share reports with Mana-KB
    - New feature: search report in Mana-KB with keywords
    - New feature: load reports from Mana-KB

Test plan:
    1 - Apply Patch + update database
    2 - Copy the three lines about mana config in etc/koha-conf.xml in ../etc/koha-conf.xml (after <backupdir> for example)
        <!-- URL of the mana KB server -->
        <!-- alternative value http://mana-test.koha-community.org to query the test server -->
        <mana_config>https://mana-kb.koha-community.org</mana_config>
    3 - Check Mana syspref and AutoShareWithMana syspref are not activated
    4 - Search the syspref ManaToken and follow the instructions
    5 - subscriptions
      - Try create a new subscription for a first serial  => Mana-KB shouldn't show you anything (except if the base hase been filled)
      - Share this serial with Mana-KB (on the serial individual's page there must be a Share button)
      - Try to create a new subscription for serial nr1 => a message should appear when you click on "next", click on "use", the fields should automaticaly appear
      - Activate AutoShareWithMana => Subscriptions
      - Create a new subscription for a second serial
      - There shouldn't be any Share button
      - Create a second subscription => the message should appear, click again on use

    6 - SQL Report
      - Create a new SQL report, without notes.
      - On the table with all report (reports > use saved), there should be the action "Share"
      - If you click on share, you have an error message
      - Create a new report, with a title and notes longer than 20 characters
      - You  can share it with mana => you will have a success message
      - On (report > use saved), there must be a message inviting you to search on Mana-KB for more results, enter a few word from title, notes, type of  the report you shared, it should appear. You can use it, it will load it into your report list.

    7 - Report mistakes.
      - On any table containing Mana-KB search results, you can report a mistake and add a comment.

    8 - For each previous test, try to send wrong data, to delete the security token, to send nothing: it should show a correct warning message.

Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>

Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>

Signed-off-by: Michal Denar <black23@gmail.com>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2019-01-23 14:39:26 +00:00
morgane alonso
cffb47ac5d Bug 17047: subscriptions management with Mana-KB
- add a class SharedContent.pm to communicate with Mana-KB server
- add a link in serials-menu.inc to serials_search.pl to open
a mana-subscription research form
- modify the research form in serials-search.tt to show the right fields
for Mana-KB
- create datatable in mana-subscription-search-result.inc to show
results from a research on Mana-KB
- modify serials-search.pl to manage research on Mana-KB

- add a mana_id to subscription table
- add a share button on serials-toolbar.inc and a modal to ask
the language of the share and to alert if the subscription is
already link to a Mana-KB subscription model
- add function in C4/Serials to get all the info for a subscription
sharing
- modify subscription-detail.pl to manage sharing to Mana-KB

- modify subscription-add.tt and subscription.pl to manage a
import from Mana-KB during a subscription creation
- add 2 script in svc for ajax calling from subscription-add.tt
to communicate with Mana-KB server during a asubscription creation
- add a function in Subscription.pm to have all the info for a Mana-KB research
from a biblionumber
- modify functions used by subscription-add.pl in C4/Serials to manage a
frequency which came from Mana-KB server and not already created on the
koha database, and modify the tests of the said functions

Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>

Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>

Signed-off-by: Michal Denar <black23@gmail.com>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2019-01-23 14:39:26 +00:00
62285d2de4 Bug 20351: Shortcut serials scripts if a blocking error appeared
The idea of output_and_exit_if_error (added by bug 18403) is to make sure
parameters are valid before executing the script.
If not (old or broken URLs), we shortcut everything coming next to display a
generic error ("object does not exist", "you do not have permission to do that", etc.)

This bug report fixes the scripts under serials/*.

Test plan:
Hit the script under the serials directory with an invalid subscriptionid parameter
and confirm you get an error instead of the normal view with empty values.

The goal is not to be exhaustive during the first iteration, but at least to fix
the most common views.

For instance:
/cgi-bin/koha/serials/subscription-detail.pl?subscriptionid=XXX
/cgi-bin/koha/serials/serials-collection.pl?subscriptionid=XXX
/cgi-bin/koha/serials/routing.pl?subscriptionid=XXX&op=new
/cgi-bin/koha/serials/subscription-add.pl?op=modify&subscriptionid=XXx
/cgi-bin/koha/serials/subscription-add.pl?op=dup&subscriptionid=XXX

Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
2018-10-17 14:25:30 +00:00
d3ed24560c Bug 18327: Add the ability to set the received date to today on multi receiving serials
When receiving several issues for a subscription (Serials > Serial
collection > Multi receiving), the reception date is always identical to the
publication date.
In some use cases we would like to set this "date received" value to
today.
Note: "date received" refers to the DB column serial.planneddate

To make this possible this patch replaces the JS prompt with a modal
dialog asking for
 1. the number of issues to receive
 2. if the received date must be set to today

Ergonomic note: bootstrap styled buttons are used, but they do not display correctly
We may need to improve that (later)

Test plan:
- Receive 1 or more serials using the "Multi receiving" buttons
Note that this button appears twice, on the "serial collection
information" and the "serial edition" pages
- Try with and without the new checkbox ticked and confirm the behaviour
is correct (i.e. date received is set to today or set to the publish
date)
- Make sure "Edit serials" and "Generate next" buttons still work as
before

Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2018-04-19 16:37:21 -03:00
Jenny Way
eb5aa28612 Bug 20015: use Modern::Perl in Serials perl script
Test plan:
Check that use strict; use warnings; doesn't exist in the following
files and use Modern::Perl; is written instead.
acqui-search-result.pl
acqui-search.pl
checkexpiration.pl
reorder_members.pl
routing-preview.pl
routing.pl
serials-collection.pl
serials-edit.pl
subscription-add.pl
subscription-bib-search.pl
subscription-renew.pl
viewalerts.pl

Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2018-02-05 09:46:45 -03:00
Aleisha Amohia
8de824115e Bug 18184: Show frequency and numbering pattern info when viewing all subs attached to a biblio
To test:
1) Go to Serials, find a serial with more than one subscription
2) Click Serial collection
3) Notice how Frequency and Numbering pattern are filled out correctly
4) Click 'see any sub attached to this biblio'
5) Notice how Frequency and Numbering pattern are now missing info
6) Apply patch and refresh page
7) Confirm Frequency and Numbering pattern now show as expected

Sponsored-by: Catalyst IT

Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
2017-10-25 12:14:39 -03:00
Aleisha Amohia
305c804ec9 Bug 18181: Can't tell which subscriptions already have a routing list if seeing all subs attached to a biblio
To test:
1) Go to Serials -> search for a subscription
2) Add a new routing list for a subscription
3) After saving, you should be redirected to the subscription detail
page
4) Click Serial collection on the left sidebar menu
5) Notice there is a button that says 'Edit routing list' next to this
subscription in the first table
6) Click 'See any subscription attached to this biblio' link
7) Notice it no longer says edit next to this subscription, it says
'Create routing list'
8) Apply patch and refresh page
9) Should now show 'Edit' button like expected

Sponsored-by: Catalyst IT

Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
2017-03-31 13:51:12 +00:00
f3e4b5bbb6 Bug 16154: CGI->multi_param - Force scalar context
This patch replaces the occurrences of
  $template->param( foo => $cgi->param('foo') );
with
  $template->param( foo => scalar $cgi->param('foo') );

perl -p -i -e 's/(\s*=>\s*)\$(cgi|input|query)\->param\(/$1scalar
\$$2\->param\(/xms' **/*.pl

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
2016-04-26 23:16:43 +00:00
66aacace08 Bug 16154: CGI->multi_param - Declare a list
This patch replaces the occurrences of
  my @foo = $cgi->param('foo');
with
  my @foo = $cgi->multi_param('foo');

perl -p -i -e
's/^(\s*my\s*@\w+\s*=\s*)\$(cgi|input|query)\->param\(/$1\$$2\->multi_param\(/xms'
**/*.pl

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
2016-04-26 23:16:42 +00:00
b64e6be1c4 Bug 16157: Move the selected flag from GetAuthorisedValues to the templates
From C4::Koha::GetAuthorisedValues

    # TODO: the "selected" feature should be replaced by a utility function
    # somewhere else, it doesn't belong in here. For starters it makes
    # caching much more complicated. Or just let the UI logic handle it, it's
    # what it's for.

Indeed, it's not a job for a subroutine, the template should take care of that.
Note that a perf gain could be won with this patch \o/

Test plan:
- Edit an itemtype and check the value of the "Search category" dropdown list
- Edit a patron attribute type and check the value of the "Class" dropdown list
- Detail for a catalogue record, the Status column should be correctly
  populated if items are damaged and/or lost
- Item details for a catalogue record, the lost, damaged and withdrawn
  value should be correctly displayed
- Edit a patron, the "street type" should be correctly selected
- Create a patron attribute type linked to an authorised value list.
- Edit a patron, set a value for this attribute, edit it again. The
  correct value should be selected.
- Search for subscriptions. The 'Location' dropdown list should behave
  correctly (select the entry you have choosen before, etc.)
- Edit a subscription, the location dropdown list should select the
  correct value.
- Edit and view a suggestion with a 'reason for suggestion' set (you
  should have at least 1 OPAC_SUG AV defined)

Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>

Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
2016-04-07 00:16:09 +00:00
018de8802d Bug 14969: Remove C4::Dates from serials/*.pl files
Warning: This area is a mess, especially with date management.

For the same reasons as other "Remove C4::Dates from*" patches, this one
will deal with the serials module.

Note that this patch add the datepicker on 3 input fields (on
serials/subscription-detail.tt and serials/subscription-renew.tt).
There was also weird behavior when the dates were invalid. Now default
to undefined. But with the datepicker it will reduce the number of
cases even if the user is still allowed to fill invalid dates.

Test plan:
1/ Create a subscription, fill the first issue pub date and the
subscription start date.
You can fill or not the end date.
Play with the numbering pattern and confirm that there are generated as
before this patch.
2/ On the check expiration page, confirm that the dates are correctly
displayed.
3/ Renew the subscription and confirm that the behavior is correct.
4/ Go on the subscription history page and confirm you have now the
datepicker plugin set on the 2 date fields.

QA notes: The startdate, histstartdate and enddate are not used in
the serials-collection template, this patch removes them from the pl
script.

Tested on top of 15166 15168 15171, full browser reload for date pickers.
Note for 4/: It is the link in tab planning on subscription
detail page, near "Manual history" (if manual history is enabled).
Works as advertised.
Signed-off-by: Marc Véron <veron@veron.ch>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2015-11-17 15:35:57 -03:00
Julian Maurice
353ed5b914 Bug 8296: Add descriptive (text) published date field for serials
Add a new field serial.publisheddatetext for displaying published date
in another format that dateformat syspref permit.

Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2015-11-05 10:41:28 -03:00
Jonathan Druart
a6c9bd0eb5 Bug 9978: Replace license header with the correct license (GPLv3+)
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>

http://bugs.koha-community.org/show_bug.cgi?id=9987

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
2015-04-20 09:59:38 -03:00
Jonathan Druart
e20270fec4 Bug 11944: use CGI( -utf8 ) everywhere
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
2015-01-13 13:07:21 -03:00
afd2418d73 Bug 11349: Change .tmpl -> .tt in scripts using templates
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.

This patch changes the occurences of '.tmpl' in favour of '.tt'.

To test:
- Apply the patch
- Install koha, and verify that every page can be accesed

Regards
To+

P.S. a followup will remove the glue code.

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>

Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
2014-07-17 11:05:49 -03:00
Fridolyn SOMERS
0c631934de Bug 11214: improve create/edit routing list links in serial collection page
When a subscription has no routing list yet, the page
serials/subscription-detail.pl shows in left menu : "Create routing list".
In serials/serials-collection.pl page, the link in table is always
"Edit routing list", even when there is no routing list.

This patch adds a conditionnal link "Edit routing list"/"Create routing
list" into serials/serials-collection.pl page.

Test plan :
- Create a subscription no. 1 without routing list and a subscription
  no. 2 with a routing list
- Go to serials/serials-collection.pl of subscription no. 1
=> You see "Create routing list" link
- Click on link
=> You see "Create routing list for"
- Go to serials/serials-collection.pl of subscription no. 2
=> You see "Edit routing list" link
- Click on link
=> You see "Edit routing list for ..."

Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Functional and automated tests pass. Passes koha-qa.pl.

Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
With the patch applied the serial collection page shows the
right link depending on the existance of a routing list.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
2013-11-27 18:23:54 +00:00
Jonathan Druart
d2052311cb Bug 8435: add permission to enable editing other library's serials if IndependantBranches is on
In the serial module, we want to hide serials from others libraries.
However, to permit central serials manage, this patch introduces a
new permission, 'superserials'. If a staff member has this permission,
that person can override the restriction.

Test plan:
- Switch on the IndependantBranches syspref
- Add the permission 'superserials' for a patron and test you can
  navigate and see all serials
- Remove this permission and test you cannot manage/view subscriptions
  from others libraries

Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
2013-10-31 15:27:19 +00:00
Julian Maurice
48b0472a63 Bug 7688: Change subscription numbering pattern and frequencies
Serials numbering pattern and frequencies are no longer hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This patch adds two new sql tables
(subscription_numberpatterns and subscription_frequencies)

Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.

There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
 - 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
   first of the week)
 - 'monthname' (name of the month) (0-11)
 - 'season' (name of the season) (0-3) (0 is Spring)

These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.

Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.

Frequencies can be configured using 3 parameters:
 - 'unit': one of 'day', 'week', 'month', 'year'
 - 'issuesperunit': integer >= 1, the number of received issues per
   'unit'
 - 'unitsperissue': integer >= 1, the number of 'unit' between two
   issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
  unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
  unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
  weeks

Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.

Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.

When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.

For instance, with a daily subscription you can have:
  skip serial number  |  keep serial number
----------------------+----------------------
 2012-01-01  ¦  No 1  | 2012-01-01  ¦  No 1
 2012-01-03  ¦  No 3  | 2012-01-03  ¦  No 2

To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.

Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.

This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)

=== TEST PLAN: ===

Create a new subscription:

  - Go to Serials module and click "New subscription" button
  - On the first page, choose a biblio and click next to go to the
    second page
  - Pick a first issue publication date
  - Choose frequency '1/day'
  - Choose a subscription length of 15 issues
  - Choose a subscription start date
  - Choose numbering pattern 'Volume, Number'
  - A table appears, fill 'Begins with' cells with '1'
  - Click on 'Test prediction pattern' button

The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).

You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".

Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.

  - Now you can play a little with frequencies and numbering patterns,
    change one of them (or both) and click again on 'Test prediction
    pattern'
  - For example, choose frequency '3/weeks' and click on 'Test
    prediction pattern' button'.

There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.

  - Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
  - Fill 'Begins with' cells with '2012' for Year and '0' for Season
  - Click on 'Test prediction pattern'
  - You should have something like 'Spring 2012', 'Summer 2012', ...,
    'Winter 2012', 'Spring 2013'
  - Note that you can have seasons for south hemisphere by entering '2'
    in 'Year/Inner counter'
  - 2nd note: if you have some locales installed on your system, you can
    type its name in the 'Locale' field (actually it does not work for
    seasons name, only for month names and day names)

If you want to modify the numbering pattern you can still do it here:

 - Click on 'Show/Hide advanced pattern' link. The advanced pattern
   table is shown but all fields are readonly
 - Click on 'Modify pattern' button. All readonly fields are now
   editable. Note that 'Begins with' and 'Inner counter' line are
   repeated here and any modifications in the small table will be
   replicated in the big table, and vice versa.
 - Pattern name is emptied, if you type a new name, a new pattern will
   be created, and if you type the same name as an existing numbering
   pattern, this one will be modified (with a confirmation message)
 - There is two new lines in this table:
   - Label: it's what is displayed in the smaller table headers above
   - Numbering: used to format numbers in different ways. can be
     'seasons', 'monthname' or 'dayname'. Month name and day name can be
     localized using the 'Locale' field. Seasons can't (values for
     English and french are hard-coded in Serials.pm)
 - You can modify what you want in the table and click on 'Test
   prediction pattern' button each time you want to see your
   modifications. (Note that checkboxes for irregularities aren't displayed
   in this mode, and you can't save the subscription until you have saved
   or cancelled your changes).
 - To cancel your modifications, just click on 'Cancel modifications'
   button.
 - To save them, click on 'Save as new pattern'. If the pattern name is
   already existing, a confirmation box will ask you if you want to
   modify the existing numbering pattern. Otherwise a new pattern will be
   created and automatically selected.

Once you have finished modifying numbering pattern, you can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.

Now you can check the serials module still works correctly:

 - Check the subscription detail page to confirm that nothing is
   missing. Especially the 'Frequency' and 'Number pattern' information.
 - Try to receive some issues. Check that the serial number is correctly
   generated and if irregularities you have defined are taken into
   account (if you have defined some).
 - Check that receiving is blocked once you have reached the number of
   issues you have defined in subscription length (or once you have
   reached the subscription end date)

In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.

'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl

'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.

Try to create a new frequency:
 - Click on 'Manage frequencies' link in the serials menu and then click
   on 'New frequency':
 - Fill in the description (mandatory).
 - Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
   an irregular subscription)
 - If unit is different from 'None' you have to fill the two following
   fields (Issues per unit, and Units per issue)
 - Note that at least one of those must be equal to 1
 - Issues per unit is the number of received issues by 'unit' and Units
   per issue is the number of 'unit' between two issues
 - Display order is used to build the drop-down list. Leave empty and it
   will be set to 0 (top of the list)
 - Then click on 'Save'
 - Check that this new frequency appears in the frequencies table and in
   the drop-down list in subscription-add.pl

Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).

 - On the detail page, tab 'Planning', you should have a link 'Edit history'.
 - Click on it
 - Modify history and click on Save
 - In tab 'Summary' you should have the infos you just entered

And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.

Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>

Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.

Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>

Squashed commits:
-----------------

Bug 7688 follow-up: Small fixes for QA

- # Subroutines::ProhibitExplicitReturnUndef: Got 1 violation(s) in
  C4::Serials::GetSubscriptionIrregularities
- Bad template constructions fixed in serials/subscription-add.tt

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>

Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>

----

Bug 7688 follow-up: Small fixes for QA #2

- "return undef" -> "return"
- ":utf8" -> ":encoding(UTF-8)"
- TAB -> SPACES

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>

Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>

----

Bug 7688: Translate sample frequencies for french

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>

Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>

----

Bug 7688: Fix generating next serial when there is no 'Expected' issue

It can happen when the Expected issue is claimed. In this case the
status of the last serial is 'Claimed'

This patch change the API of GetNextSeq and GetSeq

Test plan:
- Create a subscription which starts a long time ago so that serials
  automatically appear in late issues
- Receive the first serial
- Go to claims page and claim the 2nd serial.
- Go back to the subscription page and click on 'Serial collection'
- You should have 2 serials, one 'Arrived' and one 'Claimed'.
- Click on Generate Next. This should fail with a software error message
  ("can't call method output ...")
- Apply this patch and click again on Generate Next. A new issue must be
  created with status 'Expected'.

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>

Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>

----

Bug 7688: Followup FIX perldoc

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>

Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
2013-10-30 00:29:38 +00:00
Jonathan Druart
537c664038 Bug 9508: Standardize the dateformat value from C4::Auth
- the dateformat value is send to all templates (from
  C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files

- Remove "all" occurrences (those I found!) of dateformat_*
From now the only way to get the date format is a string comparaison
(dateformat == "metric")

Checked with the command:
  git grep "\(dateformat_us\|dateformat_metric\|dateformat_iso\)" | grep
  -v translator

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tested all the datepickers I could find, looks good.

Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
2013-05-20 09:05:01 -07:00
Jared Camins-Esakov
b9db6ae0f7 Revert "Merge branch 'bug_7688' into 3.12-master"
This reverts commit 60508cb03d, reversing
changes made to 8579d07f14.

The patches for bug 7688 caused a failure in t/db_dependent/Serials.t:
not ok 8 - test getting history from sub-scription

Conflicts:

	installer/data/mysql/kohastructure.sql
	installer/data/mysql/updatedatabase.pl
	kohaversion.pl
2013-03-23 00:36:37 -04:00
Julian Maurice
da5aca223f Bug 7688: Fix generating next serial when there is no 'Expected' issue
It can happen when the Expected issue is claimed. In this case the
status of the last serial is 'Claimed'

This patch change the API of GetNextSeq and GetSeq

Test plan:
- Create a subscription which starts a long time ago so that serials
  automatically appear in late issues
- Receive the first serial
- Go to claims page and claim the 2nd serial.
- Go back to the subscription page and click on 'Serial collection'
- You should have 2 serials, one 'Arrived' and one 'Claimed'.
- Click on Generate Next. This should fail with a software error message
  ("can't call method output ...")
- Apply this patch and click again on Generate Next. A new issue must be
  created with status 'Expected'.

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>

Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
2013-03-22 22:14:36 -04:00
Julian Maurice
dc9ff3c53d Bug 7688: Change subscription numbering pattern and frequencies
Serials numbering pattern and frequencies are no more hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This implies new sql tables (subscription_numberpatterns
and subscription_frequencies)

Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.

There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
 - 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
   first of the week)
 - 'monthname' (name of the month) (0-11)
 - 'season' (name of the season) (0-3) (0 is Spring)

These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.

Frequencies can be configured using 3 parameters:
 - 'unit': one of 'day', 'week', 'month', 'year'
 - 'issuesperunit': integer >= 1, the number of received issues per
   'unit'
 - 'unitsperissue': integer >= 1, the number of 'unit' between two
   issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
  unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
  unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
  weeks

Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.

When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
  skip serial number  |  keep serial number
----------------------+----------------------
 2012-01-01  ¦  No 1  | 2012-01-01  ¦  No 1
 2012-01-03  ¦  No 3  | 2012-01-03  ¦  No 2

To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.

Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.

This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)

=== TEST PLAN: ===

Create a new subscription:

  - Go to Serials module and click "New subscription" button
  - On the first page, choose a biblio and click next to go to the
    second page
  - Pick a first issue publication date
  - Choose frequency '1/day'
  - Choose a subscription length of 15 issues
  - Choose a subscription start date
  - Choose numbering pattern 'Volume, Number'
  - A table appears, fill 'Begins with' cells with '1'
  - Click on 'Test prediction pattern' button

The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).

You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".

Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.

  - Now you can play a little with frequencies and numbering patterns,
    change one of them (or both) and click again on 'Test prediction
    pattern'
  - For example, choose frequency '3/weeks' and click on 'Test
    prediction pattern' button'.

There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.

  - Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
  - Fill 'Begins with' cells with '2012' for Year and '0' for Season
  - Click on 'Test prediction pattern'
  - You should have something like 'Spring 2012', 'Summer 2012', ...,
    'Winter 2012', 'Spring 2013'
  - Note that you can have seasons for south hemisphere by entering '2'
    in 'Year/Inner counter'
  - 2nd note: if you have some locales installed on your system, you can
    type its name in the 'Locale' field (actually it does not work for
    seasons name, only for month names and day names)

If you want to modify the numbering pattern you can still do it here:

 - Click on 'Show/Hide advanced pattern' link. The advanced pattern
   table is shown but all fields are readonly
 - Click on 'Modify pattern' button. All readonly fields are now
   editable. Note that 'Begins with' and 'Inner counter' line are
   repeated here and any modifications in the small table will be
   replicated in the big table, and vice versa.
 - Pattern name is emptied, if you type a new name, a new pattern will
   be created, and if you type the same name as an existing numbering
   pattern, this one will be modified (with a confirmation message)
 - There is two new lines in this table:
   - Label: it's what is displayed in the smaller table headers above
   - Numbering: used to format numbers in different ways. can be
     'seasons', 'monthname' or 'dayname'. Month name and day name can be
     localized using the 'Locale' field. Seasons can't (values for
     english and french are hard-coded in Serials.pm)
 - You can modify what you want in the table and click on 'Test
   prediction pattern' button each time you want to see your
   modifications. (Note that checkboxes for irregularities aren't displayed
   in this mode, and you can't save the subscription until you have saved
   or cancelled your changes).
 - To cancel your modifications, just click on 'Cancel modifications'
   button.
 - To save them, click on 'Save as new pattern'. If the pattern name is
   already existing, a confirmation box will ask you if you want to
   modify the existing numbering pattern. Otherwise a new pattern will be
   created and automatically selected.

Once you have finished modifying numbering pattern. You can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.

Now you can check the serials module still works correctly:

 - Check the subscription detail page to confirm that nothing is
   missing. Especially the 'Frequency' and 'Number pattern' infos
 - Try to receive some issues. Check that the serial number is correctly
   generated and if irregularities you have defined are taken into
   account (if you have defined some).
 - Check that receiving is blocked once you have reached the number of
   issues you have defined in subscription length (or once you have
   reached the subscription end date)

In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.

'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl

'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.

Try to create a new frequency:
 - Click on 'Manage frequencies' link in the serials menu and then click
   on 'New frequency':
 - Fill in the description (mandatory).
 - Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
   an irregular subscription)
 - If unit is different from 'None' you have to fill the two following
   fields (Issues per unit, and Units per issue)
 - Note that at least one of those must be equal to 1
 - Issues per unit is the number of received issues by 'unit' and Units
   per issue is the number of 'unit' between two issues
 - Display order is used to build the drop-down list. Leave empty and it
   will be set to 0 (top of the list)
 - Then click on 'Save'
 - Check that this new frequency appears in the frequencies table and in
   the drop-down list in subscription-add.pl

Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).

 - On the detail page, tab 'Planning', you should have a link 'Edit history'.
 - Click on it
 - Modify history and click on Save
 - In tab 'Summary' you should have the infos you just entered

And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.

Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>

Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.

Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
2013-03-22 22:14:28 -04:00
Jonathan Druart
c39380ed4e Bug 8782: Close a subscription
If a subscription is no longer enough published (or we are not waiting
for a new periodical) we are allowed to close it.
If a subscription is closed, we are not able to receive or generate a
new serial.

On the serial module, we can now
- close a subscriptionn
- reopen a closed subscription

On serial search 2 tabs is displayed (opened and closed subscriptions).

This patch adds:
- a new field subscription.closed in DB
- a new status for serials (8 = stopped)

Test plan:
- search subscriptions
- close a subscription and check that you cannot receive or generate a
  new serial
- launch another search and check that the closed serial is into the "closed"
  tab.
- You are allowed to reopen a subscription on the subscription detail
  page and on the subscription result page. A javascript alert ask you
  if are certain to do this operation.
- Check the serial status "stopped" everywhere the status is
  displayed (catalogue/detail.pl, serials/claims.pl,
  serials/serial-issues-full.pl, serials/serials-collection.pl,
  serials/serials-edit.pl, serials/serials-recieve.pl,
  serials/subscription-detail.pl and opac-full-serial-issues.pl)
- The report statistics does not include the closed subscriptions if you
  don't check the "Include expired subscriptions" checkbox.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>

Bug 8782: Followup: add some minor modifications

- Show 'closed' information in biblio detail page
- Add a column in serials report table
- Search subscriptions on title words instead of string
- Prevent serials editing when subscription is closed
- Don't change status of "disabled" serials

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>

Bug 8782 - Close a subscription - Followup - Fix updatedatabase.pl

Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
2012-11-30 08:14:24 -05:00
Jonathan Druart
7444b82fed Bug 8715: Receive all serials for a year.
This patch adds
- 2 links in the table header (select all and clear all).
- Datatable on these tables

Test plan:
Try to select all serials for a year and receive them.
Test there is no regression (ergonomic) on this page

Signed-off-by: Owen Leonard <oleonard@myacpl.org>

Bug 8715 [Follow-up] Receiving all serials for a year

Follow-up: For consistency, I would prefer to have the
column of checkboxes at the beginning of the table and the
select/clear links above.

Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>

Bug 8715: Force the default sort order to desc

Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
2012-11-30 07:13:57 -05:00
Lyon3 Team
2f875daa60 Bug_7913-Follow-up, hide button for subs with items
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
2012-10-01 17:50:16 +02:00
Lyon3 Team
cd2fae07ae Receiving serials in a loop
generate the number of issues entered from a message box and apply
'arrived' status.

http://bugs.koha-community.org/show_bug.cgi?id=7913
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
2012-10-01 17:50:12 +02:00
Matthias Meusburger
7f957077dd Bug 5337: EAN management : Adds ean for various searches
- in various acquisition pages and serials home
  - in database : biblioitems.ean
  - adds ean and its mapping in default english bibliographic framework
  - adds ean mapping in default french bibliographic framework
  - ean search is not enabled for MARC21

The required mapping between the ean marc field and the biblioitems.ean
database field will be automatically added on an existing unimarc installation.

However, if you already have records with ean, you will have to
run misc/batchRebuildBiblioTables.pl to populate biblioitems.ean

Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Passed QA at second run. Removed a merge marker only.
2012-06-09 18:26:34 +02:00
Katrin Fischer
88a2079a48 Bug 7523: Improve checks for routing permissions
- system preference RoutingSerials and user permission routing
  should be taken into account
- print routing list should be independent from routing permission

To test, compare to master and check:

1) If system preference RoutingSerials is OFF, routing list functionality is
not visible in the templates.

2) If system preference RoutingSerials is ON, but user doesn't have routing
permission, routing list functionality is not visible in templates,
with exception of 'print list' on the serial collection page.

3) If system preference RoutingSerials is ON and user has routing permissions,
all routing links are visible (serial collection, serials navigation,
result list of serial search)

Additional changes:
Changed labels on templates to match HTML4 rule from coding guidelines.
http://wiki.koha-community.org/wiki/Coding_Guidelines#Upper_and_Lower_cases_in_strings

Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
2012-02-27 18:22:01 +01:00
Katrin Fischer
d9d364516b Bug 7521: Templates should use receive_serials permission
Corrects templates to use permission receive_serials.

Before patch:
1) Serial receive page (/cgi-bin/koha/serials/serials-edit.pl...)
can only be accessed with full serials permissions.
When one permission is missing, page can not be accessed.

2) Serial collection/Issue History page (/cgi-bin/koha/serials/serials-collection.pl...)
can only be accessed with full serials permissions.

After applying patch:
1) Serial receive page can only be accessed when user has receive_serials
permission.

2) Edit and serial receive links are hidden, when user doesn't have
serials_receive permission. Page is accessible with at least 1 serials
permission.

I will send a another patch to correct behaviour for the routing permission.

Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
2012-02-17 09:51:49 +01:00
Katrin Fischer
42265ef217 Bug 7338: Follow up: show link only when there is more than 1 subscription
To be tested together with
http://bugs.koha-community.org/bugzilla3/attachment.cgi?id=6690

1) Create a subscription for a title
- check the link 'Show any subscription...' doesn't show now
- check the serials collection page works correctly and shows all
necessary information

2) Create a second subscription for the same title
- check a new link 'Show any subscription...' shows up now
- use links in the issue table to change between viewing the single subscription
and the overview page
- check it works correctly and all information shows up

Signed-off-by: Frédéric Demians <f.demians@tamil.fr>

It works. With this patch, on Serials Collection page, the link, 'See any
subscription attached to this biblio' appears only when there are more than one
subscription attached to the biblio record.
2012-01-06 15:10:47 +01:00
33587674fa Bug 7338 Links on Serial Collection page
Don't display link to the serial, when the collection page displays just
one subscription. Display it when several subscriptions. Alway display a
link for displaying biblio record other subscriptions.

Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works nicely, but always shows link to 'any subscriptions'.
I did a follow-up so the link would only show if there was more
than 1 subscription for the record.

Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
2012-01-06 15:10:35 +01:00
Colin Campbell
d22a4d2038 Bug 5026 Undefined dates formatted poorly in serials-edit
Don't display junk in empty fields
Don't generate errors

Merged some changes to make variable names moremeaningful in loops ( within loops)

Thanks to M De Rooy for spotting a couple of issues in the original patch

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
2011-01-17 21:22:14 +13:00
Chris Cormack
2529527597 Bug 5508 : Updating copyright statements 2010-12-16 11:49:36 +13:00
Alex Arnaud
ba8a2c7e8a (MT4068) Display callnumber & location in serials-collection.pl & serials-edit.pl.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
2010-12-15 12:46:48 +00:00
Henri-Damien LAURENT
c7effbe209 MT3667 followup MT3811 : unexpected issues not stored
As a consequence of previous MT3667 patch, the subscriptionid list was processed.
And unfortunately, since array order is the only relevant information from HTML processing,
it caused subscriptionid to be null for a double edition.
This patch only uses uniq for serials-collection and when passing information to serials-collection page.

Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
2010-12-15 12:39:29 +00:00
Chris Cormack
b3feb54ee0 Cherry-picked onto master, fixing conflicts: MT 1816: Granular permissions for the serials module
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>

Conflicts:

	installer/data/mysql/en/mandatory/userpermissions.sql
	installer/data/mysql/fr-FR/1-Obligatoire/userpermissions.sql
	installer/data/mysql/updatedatabase30.pl
	koha-tmpl/intranet-tmpl/prog/en/includes/header.inc
	koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-home.tmpl
	serials/member-search.pl
	serials/serials-edit.pl
	serials/subscription-add.pl
	serials/subscription-bib-search.pl
	serials/subscription-detail.pl
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
2010-06-19 07:23:46 -04:00
Lars Wirzenius
9302e45442 Fix FSF address in directory serials/
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
2010-03-16 20:17:54 -04:00
Colin Campbell
ef8c349c2c Fix some code issues in serials scripts
Add use warnings where not present
Remove unused variables
Avoid redeclarations of variables
trailing spaces trimmed

Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
2010-02-02 18:46:03 -05:00
Matthias Meusburger
d208a5593a MT 1903 : Remove "Automatically set to late" note in serials-collection.pl 2009-09-30 11:30:40 +02:00
Colin Campbell
bfad238475 Ensure op is defined in serials scripts
Set $op to an empty string if no value passed
otherwise the error-log fills with warnings on comparison
2009-09-16 07:20:08 -04:00
Colin Campbell
c9f3ede161 Enable warnings in serial scripts
Remove some superfluous variables
Simplify some loops over lists
Fix generated warnings
Strip whitespace from line endings

Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
2009-09-14 21:26:11 -04:00
Nahuel ANGELINETTI
70e46edf73 (bug #2961) change the workflow of the new issue
This patch change the operations, it add a new expected if no one expected exists, else it create new excepted, and set the others as "late"

Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
2009-04-27 18:03:30 -05:00
Nahuel ANGELINETTI
5397ab31dc (bug #2961) add a button to add manually the next issue
This patch add a button in "Serial Collection" to add manually the next issue. And improve the function GetNextExpected
to retrieve at least something.

Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
2009-03-04 09:40:55 -06:00
Ryan Higgins
f98e567b57 Populate serialitems table, bugfix
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
2008-01-10 13:45:19 -06:00
Joshua Ferraro
a602c6d6eb cleanup for serials and members for Dates 2007-12-04 19:03:35 -06:00