Some devices are using patron information responses to validate
patron passwords to govern access to facilities as we
were using C4::Auth::checkpw_hash this only worked in a db password
context not other authentication routines.
The C4::Auth routines are not very consistent and there isnt a dropin
replacement for checkpw_hash this calls checkpw instead.
In a password only environment this behaves as the old version did
returning field CQ as Y if a valid password or no password is passed in
the patron info request and N if an incorrect password is supplied
It should also test against the appropriate authentication sources if
othere autrhentication schemes are in use
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested this with a client who reports that this enables SIP authentication to work correctly with their LDAP server.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch specifically adds a test for the sub added to
resolve Bug 15479. As no test script existed to add this two
added one which also tests that ILS objects can be instantiated
correctly and offer the required interface
NOTE: This does not apply without the first patch.
Comment #3 suggested a unit test that would fail
before and pass after. So while this code is good,
it missed the before case. -- mtompset
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The borrowers table is defined COLLATE=utf8_unicode_ci which means
that cardnumbers may be saved in either lowercase or uppercase and
these are considered equivalent.
The server was performing a case sensitive comparison between
the incoming patron identifier and that retrieved from the db
As a result some renewals were rejected as being on loan to
another borrower if the stored cardnumber differed in case.
Make code comparison comply with db.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Calling UNIVERSAL's internal methods will cause a depreciation
warning in perls less that 5.22 as of 5.22 the warning is a fatal
error causing compilation to abort
Replace the use UNIVERSAL with UNIVERSAL::can to work around the
buggy construct perldoc UNIVERSAL::can for more info
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more worning/error
No qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If an item is not checked out when a checkin via SIP2 is attempted,
Koha's SIP server sends back an "ok" of 0, and the AF message "Item
not checked out". I am not entirely sure this is good and correct
behavior by the SIP2 protocol.
In particular, this will cause SIP2 book sorting devices to fail on
all items that are not checked out, causing them all to be put into
the "special handling" been that should be reserved for things like
items checked in at the wrong library and items on hold.
Test Plan:
1) Apply the patch for bug 13159 so you can use the new enhanced
SIP2 command line emulator
2) Use a command similar to the following to check in an item:
sip_cli_emulator.pl -a localhost -su <sip user> -sp <sip password> -l <instituation id> --item <barcode> -m checkin
3) Note the 3rd character is 0, and there is an AF field saying the item is not checked out
4) Apply this patch
5) Restart the SIP server
6) Repeat steps 2-3, note that nothing has changed
7) In the SIP config file, Add the parameter checked_in_ok="1" to the SIP account you are using.
8) Restart the SIP server
9) Repeat steps 2-3, note that this time the 3rd character is 1, and you do not recieve the item not checked out message.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Return from AddIssue used to be due date or undef.
Now it is less straightforward returning am issue object
if an issue row is created or undef. If the issue is a renewal
undef is returned. As that case was not handled properly it
caused the server site to crash the listener causing a
communications error on the client.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the staff client we had still some remains referring to the
constraint types.
Also touched one comment line from SIP.
Test plan:
Add a hold in the staff client.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Apply this patch set
2) prove t/db_dependent/Circulation.t
3) prove t/db_dependent/Holds.t
4) prove t/db_dependent/Holds/LocalHoldsPriority.t
5) prove t/db_dependent/Holds/RevertWaitingStatus.t
6) prove t/db_dependent/HoldsQueue.t
7) prove t/db_dependent/Reserves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
AMENDED: An else branch in reserve/placerequest.pl was removed. This had
the effect of making it no longer possible to place an any hold in the
staff client.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified placing a biblio level and an item level hold.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes breakage introduced by the patch for bug 13506
that prevented SIP2 clients from authenticating themselves over
the telnet transport. Attempts to do so would manifest by the
SIPServer backend crashing and the connection getting closed.
To test:
[1] Use the stock SIPServer config, etc/SIPconfig.xml, and ensure
that the database contains a staff user whose username is 'term1'
and password is 'term1' that has the circulate permission.
[2] Start SIPServer, telnet to port 8023, and attempt to log in. The
connection will be aborted:
$ telnet localhost 8023
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
login: term1
password: term1
Connection closed by foreign host.
[3] Apply the patch and restart SIPSever, then repeat step 2. This time,
the login should succeed:
$ telnet localhost 8023
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
login: term1
password: term1
Login OK. Initiating SIP
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Most of them were found and fixed using codespell.
Fix also some related grammar issues.
In C4/Serials.pm a variable was renamed to make future codespelling
checks easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
http://bugs.koha-community.org/show_bug.cgi?id=14383
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I needed to be able to perform checkout operations for testing from the
command line. I ended up reengineering the SIP2 command line tester
quite a bit.
Enhancements:
* Moved message generation code to subroutines
* Added support for more messages
* Added command line switches for each supported message
* Enabled use of Sip::Constants to keep code DRY and more understandable
* Moved script from misc to C4/SIP
* Designed with an eye towards possibly moving some code to CPAN in the future
* Also designed to make adding new messages much easier in the future
Test Plan:
1) Apply this patch
2) Look at help via ./C4/SIP/sip_cli_emulator.pl --help
3) Test patron status request and patron information, should work as before
except you need to pass the command line switche -m <message_name>
4) Test the new checkout option using -m checkout -i <item barcode>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Worked as advertised, with one warning at renew only:
Trying 'renew'
Use of uninitialized value $value in concatenation (.) or string at ./sip_cli_emulator.pl line 462, <GEN0> chunk 1.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Ensure that the transit flag (in field CV) is set
if return message is 'wasTransfered'
CV is being set for other return conditions but not for
wasTransfered [sic] The presence of this flag is required to
route returns to the correct bin if the SC unit is so
enabled
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I agree with the solution to an issue I've already encountered and
patched localy that way. It would be nice to have a better doc of
C4::Circulation::AddReturn in order to see immediately that
WasTransfered is a valid feedback for a check-in.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that many librarians find it disconcerting to have no feedback
with the new checkouts table. It seems that many of them wait for it to
fully load, check to verify the item was checked out, and only then
check out the next item.
To help alleviate this issue, we can have the checkouts page give
feedback about the item that was just checked out.
Test Plan:
1) Apply this patch
2) Check an item out
3) Note the message "$title ($barcode) due on $date_due"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works well and fixes a very problematic issue with the new AJAX
circ. I will be submitting a follow-up which I think is an improvement
to the display.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Implement correct handling of fees associated with checking out
an item.
This is associated with fee acknowledged field (BO)
To quote from the Sip2 document
" If this field is N in a Checkout message and there is a fee
associated with checking out the item, the ACS should tell the
SC in the Checkout Response that there is a fee, and refuse to
check out the item. If the SC and the patron then interact and the
patron agrees to pay the fee, this field will be set to Y on a second
Checkout message, indicating to the ACS that the patron has acknowledged
the fee and checkout of the item should not be refused just
because there is a fee associated with the item"
So there are two Checkout requests the first with BO not set to Y is
rejected but the fee amount is returned. The Second Checkout with BO set
to Y should succeed.
Added a debug log message indicating why we block a checkout
when we dont otherwise indicate
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Adds a checkin operation at the beginning of the test.
Otherwise, a former test leaves the test item checked out
and this generates an error.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sip::Configuration calls new on Account, Institution and Service
classes but does not store or subsequently use the returned objects
( which immediately go out of scope ). Their existence just obscures
the code and misleads the reader. Remobe them
Removed redundant commented out code from Configyration module which
was not serving any useful purpose
Ran Configuration.pm through perltidy to make layout more
consistent
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For historical reasons the SIPServer and SIP modules
have used an extra module path in addition to the
standard Koha one. This has caused numerous irritants
in attempting to set up scripts and basic tests. It
does not help in attempting to modify or debug
this code
This patch changes the package value in the modules
under the C4/SIP directory and makes calls to
them use the full package name.
Where the export mechanism was being short circuited
routines have been explicitly exported and imported
declarations of 'use ILS' when that module was
not being used and which only generated warnings
have been removed.
As a lot of the changes affect lines where
an object is instantiated with new. The opportunity
has been taken to replace the ambiguous indirect
syntax with the preferred direct call
In intializing ILS the full path is added as this
will not require any changes to existing configs.
I suspect this feature is unused, and adds
obfuscation rather than flexibility but have kept
the feature as we need this change in order to
rationalize and extend the testing of the server.
The visible difference is that with the normal Koha
PERL5LIB setting. Compilation of Modules under C4/SIP
should be successful and not fail with unlocated modules,
allowing developers to see any perl warnings
All the SIP modules can now be run through the tests
in t/00-load.t now except for SIPServer itself
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Koha's SIP server accepts timeout parameters, but those parameters
are only used for the login portion of a telnet transport session.
Other than that, they are ignored, and as long as whatever opened
the connection keeps it open, it will stay open indefinitely.
Test Plan:
1) Set the timeout setting on your SIP server to 10 seconds
2) Modify misc/sip_cli_emulator.pl, add "sleep 100;" directly after line 91
3) Start your SIP server
4) Run the modified sip script with valid parameters
5) Watch the SIP server stderr
6) Note that even though the script waits far too long before continuing,
the SIP server never kills the connection, and the requests the cli
script makes come back with valid data.
7) Apply this patch
8) Restart your SIP server
9) Repeat step 4
10) Note that this time you see "SIP Timed Out!" in the SIP server
stderr and when the script finally makes it's request, it doesn't
come back with valid data.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The SIP config has allowed you to specify an interface ip as
part of the listeners/service/port attributei
e. g. as port="127.0.0.1:6001/tcp"
with IPv6 the equivalent would normally be
as port="[::1]:5001/tcp"
However in this case incoming connections will get rejected because
Configuration constructs a string without the brackets
This patch makes tests both formats on incoming connections so that
they are accepted as they were previously
In future the best course is not to include a port identifier in the
port definition then if the server has ipv6 it will bind to all
interfaces and accept both IPv4 and IPv6 traffic
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This small patch adds a check on the SIP2 socket connection if it is
IPv6 and resolves socket address accordingly.
Any newer Debian distro would probably default to IPv6 so it would
eventually affect all SIP servers.
Tests against running SIP server on an IPv6 box:
http://wiki.koha-community.org/wiki/Koha_SIP2_server_setup#Testing_with_Telnet
before patch:
disconnects immediately. Log output:
Bad arg length for Socket::unpack_sockaddr_in, length is 28, should be 16
after patch:
operates normally
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We should add the ability to apply a regular expression to screen
messages for the SIP2 server. This would allow libraries to not only
customize the screen messages the patron sees, but can also allow screen
messages to be translated.
Test Plan:
1) Apply this patch
2) Inspect etc/SIPconfig.xml, note the new screen_msg_regex tags
that can be nested inside a given login tag.
3) Add one or more screen_msg_regex tags to your own SIP config
Recommendation: s/Greetings from Koha./Welcome to your library!/g
4) Restart your SIP2 server
5) Test with a SIP2 machine, or use /misc/sip_cli_emulator.pl
6) Note your new AF fields!
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the patron has amassed charges that block borrowing, but we
allow staff override the information that the patron cannot
issue should be included the patron information response
This patch sets the appropriate status fields in the patron object
It restores the fee_limit member to the patron object
and calls a local subroutine to set it.
This could be done more elegantly but that would require more
major refactoring of the rather messy initializer code
in ILS::Patron
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a patrons fines exceed noissuescharge and we allow
staff to allow issue at their discretion via an override
the SIP process allowed charges to go ahead.
This patch closes the loophole which allowed self issue
to subvert the usual library loan policy
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you do a kill -s HUP sipserver_pid the server process
should restart its children.
This was not happening although it was logging the commencement
of the process.
Removed traces of Exporter usage this was always incorrect
this program inherits from Net::Server 'use base' to make inheritance
clearer. Removed unnecessary begin block
made file executable so it can run
added a shebang line so OS knows to invoke perl to compile and run
the file.
I've removed the debug code dumping the config to STDOUT,
it should not have gone into the production version.
One of the first things this program does is close stdout etc and
reopens the sip sockets to them. Assuming you can print to them other
than as part of the sip dialogue is not always safe.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12041 made xt/author/podcorrectness.t consider files in the 'Koha' namespace.
Some of them where failing. This patch fixes some of those POD problems.
Best regards
To+
Test:
1) run prove xt/author/podcorrectness.t
it fails
2) apply patch
3) run again, now it's ok
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Before patch test fails. After it, it pass
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently Koha's SIP server ignores the return date part of an 09 ( aka
CHECKIN ) message. Koha should backdate a return, and remove
fines accordingly.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Works as notified, second date field in SIP checkin (return date) is
used as return date. Return shows up in history with correct date.
Comments:
- patron is fined if return date is before issue date, but that
is largely irrelevant anyway.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes various issues that prevented the account
type from being set correctly when recording SIP2 payments:
- the fixed fields in the fee paid message were not getting
parsed correclty
- accountlines.accounttype is only five characters wide, so
SIP2 payments are now records as 'Pay00', 'Pay02', etc. rather
than 'Pay-00'.
- removed regression on bug 2546 and made the new payment types
translatable
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds support for recording in Koha accountlines a different accounttype
depending on how the fee was paid at the SIP2 station (cash, credit,
etc.)
Adds a new param to recordpayment(), $sip_paytype, which is appended to
the 'Pay' type if present. The payment description is also appended
with " (via SIP2)" if this is present.
In order for other scripts to keep working as expected, "eq 'Pay'"
needed to be replaced with a regex comparison "=~ /^Pay/", so that 'Pay'
and 'Pay-##' would continue to group together.
To test:
1. Make a payment over a SIP2 connection
2. Check the patron record in the staff client; you should see the
modified description
3. Attempt to print a invoice or a reciept for the borrower; the
payment should show up where expected
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The accounts->login tag in SIPconfig.xml can now accept a new
parameter, "encoding". It will be mostly used to encode to utf8.
For this, simply add the parameter: encoding="utf8"
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works as advertised, does nothing if encoding is not set.
Blows up all the machines that can't handled utf8 if it is set :) But
that's not Koha's fault. :)
Patch rebased by Christophe Croullebois <christophe.croullebois@biblibre.com>
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
But now I did it the right way! And I can confirm that this patch solves
all issues with mangled characters in SIP messages. Confirmed that it
looks good with Norwegian characters in patron name and in book titles.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha's SIP2 server implementation does not currently support the SIP2
protocol field "media type" ( CK ).
This patch implements the SIP2 media type by allowing an arbitrary
mapping of itemtypes to SIP2 media types.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Edit an itemtype, select a SIP media type, and save the changes
4) Make a SIP2 Item Information Request
5) Verify that the CK field of the Item Information Response contains
the correct media type code.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If a patron has a record-level hold that is unavailable, any patron
information request will send back an empty CD field when this field
should have an item barcode in it [RM note: this actually isn't
universally true -- the SIP2 standard is silent as to what is supposed
to go in the CD field. Some SIP2 devices do indeed want an item
barcode, but others are known to just want a display of the title
and author of the request in question. Providing an option is the
topic of a new enhancement request, however.]
This is due to a minor error in ILS::Patron::_get_outstanding_holds
where GetItemnumbersForBiblio is assumed to return an array but in
reality returns an arrayref.
Test Plan:
1) Create a record level hold for a patron and record
2) Using SIP2, make a patron information request
3) Note the empty CD fields
4) Apply this patch, restart SIP server
5) Repeat step 2
6) Note the CD field now has a barcode
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I did not test this patch but the following code shows me it is correct:
use C4::Items;
use Data::Dumper;
my $biblionumber = 5035;
my $itemnumber = (GetItemnumbersForBiblio($biblionumber))[0];
say Dumper $itemnumber;
$itemnumber = (GetItemnumbersForBiblio($biblionumber))->[0];
say Dumper $itemnumber;
displays:
$VAR1 = [
'23168',
'23169',
'23170',
'23171',
'23172'
];
$VAR1 = '23168';
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The return from GetReservesFromBiblionumber contains an unnecessary
extra variable. In scalar context an array returns its element count.
Maintaining a separate count can lead to unforeseen bugs
and imposes ugly constructions on the subroutine's users.
Remove the useless count variable from the return
This patch also changes the parameters: now the routine takes a hashref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Placed biblio holds, future holds and item holds. Works as expected.
Tested Holds.t and Reserves.t. Pass.
Tested /cgi-bin/koha/ilsdi.pl?service=GetRecords&id=999 with two holds on
one item. Fine.
C4/SIP/ILS/Item.pm: Looked for "whatever" and "arrayref" and could not find
them anymore. Looks good.
Handled a few unneeded calls in QA follow-up.
Left only one point to-do for serials/routing-preview.pl. See Bugzilla.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The system preference 'maxoutstanding' is defined as the maximum amount
of fees owed by the patron before Koha should block placing holds (
terrible naming on this one ).
However, although the Koha OPAC respects this preference, placing holds
via a SIP2 device will not.
Test Plan:
1) Set maxoutstanding to $10
2) Pick a patron owning more than $10 in fees
3) Attempt to place a hold for this patron from a SIP2 device
This attempt should succeed
4) Apply this patch
5) Restart your SIP2 server
6) Attempt to place a hold for this patron from a SIP2 device again
This attempt should now fail
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test:
* SIP: Have an old user and create a new user
- use either tenet sip test or
C4/SIP/interactive_patron_check_password.pl to check old
userid/password
- do the same for the new user
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described
Test
1) using perl C4/SIP/interactive_patron_check_password.pl
can check current (short) and new (long) passwords
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When requested by the summary flags the sipserver
should return in the patron info response barcodes of
the relevant titles.
For available holds this is the barcode of the captured items.
For unavailable holds ( i.e. current unsatisfied holds ),
we need to send a barcode so that the unit can use this to
request the title info. The barcode could be any one
belonging to the title.
This patch also corrects the erroneous return of empty items
in the patron information response. If the unit supplies a
range 1 - 100 unless the title has a hundred or more copies the
unit expects all copies. The server was erroneously stuffing
the returned arrays with null copies so that all summary requests
returned 100 copies (mainly without barcodes)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes:
Using the test script provided on the bug report, but changed it
to match sip user and patron existing in my database.
Before applying the patch the SIP responses show the behaviour
pointed out above regarding the 100 items. After applying the
patch and restarting the SIP server responses are much more clean
not returning empty IDs.
64 Patron information response
AS = hold items
hold items count is correct.
AS contains barcodes of waiting holds.
Before patch, all AS were empty.
AT = overdue items
overdue items count is correct.
AT contains barcodes of overdue items.
AU = charged items
charged items count is correct.
AU contains barcodes of charged items.
AV = fine items
Judging from behaviour seen and comment in
Patrons.pm currently not implemented.
BU = recall items
Recalls are not implemented in Koha yet.
CD = unavailable hold items
unavailable items count is correct.
CD contains barcode for item level holds and is empty
for title level holds where no item can be determined.
Before patch, all CD were empty.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch gives you the option of sending a patrons home branch code
in an AF field for patron status requests. It is controlled at the account
login level, so it can be enable on a per-sip-login basis.
Test Plan:
1) Apply patch
2) Edit SIPconfig.xml, add the parameter 'send_patron_home_library_in_af="1"'
to the login you will be using to test.
3) Start your SIP2 server.
4) Connect to it via telnet ( something like: '9300CNterm1|COterm1|CPCPL|' )
5) Send a patron status request ( like: '2300120121110 82925AOCPL|AA23529000035676|ACterm1|ADletmein' )
6) Examine reponse you should see something like this:
"24 00120121210 085332AEHenry Acevedo|AA23529000035676|BLY|CQN|AFGreetings from Koha. |AFMPL|AO|"
Note the second AF field with the value MPL.
Signed-off-by: George Williams <georgew@latahlibrary.org>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
