This patch adds the ability to skip forward issues when receiving and generating the next issue
from both the serial receive page and serial collection page.
To test:
1. Apply patch.
2. Set up a subscription for a bib record.
3. Go to Serials -> Search your subscription -> Serial receive
4. Note that below last expected issue there will be checkbox to toggle a field to
specify how many issues to skip when recieving and generating the next.
5. On serials-collection page there is also a button 'Skip issues and generate next'.
When pressed will open a modal promting how many issues to skip.
6. Generate issues with different values and make sure the correct issue is generated.
Sponsored-by: Lund University Library
Sponsored-by: Bibliotek Mellansjö, Sweden
Co-authored-by: Johan Sahlberg <johan.sahlberg@tidaholm.se>
Signed-off-by: Marie Hedbom <marie.hedbom@musikverket.se>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch extends the numbering pattern field to accept subsititutions for:
{Year} {Day} {DayName} {Month} {MonthName}
These fields are based on the publication date for the serial issue.
To test:
0 - Apply patch
1 - Setup a enw numbering pattern
Serials->Manage numbering patterns + New numbering pattern
2 - In the numbering formula enter: {X} {Y} {Z} {Year} {Month} {Day} {MonthName} {DayName}
3 - Populate X/Y/Z in the table as you wish, these should be unaffected by patch
4 - Set a Frequency / First issue plublication date / Subscription length
5 - Click 'Test pattern'
6 - Confirm the dates in the Number match the publication date values
7 - Try with different frequencies to confirm they match
8 - Save the pattern
9 - Create a new subscription and use the new pattern
10 - Confirm it works as expected
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1) Make sure SerialsSearchResultsLimit syspref is unset or set to 0.
2) Perform an advanced search on serials without any conditions
and confirm all serials are listed as expected.
3) Set SerialsSearchResultsLimit to a value less the the number
of total subscriptions, perform the search again, and confirm
that the number of serials has been limited to the set value.
4) Ensure all tests pass in t/db_dependent/Serials.t
Sponsored-by: Gothenburg University Library
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds biblio.part_name and biblio.part_number to the SELECT of
SearchSubscriptions in order to be able to display the information in
the results list. It does not affect search.
To test:
* Add one or more subscriptions
* Make sure at least one is linked to a title with 245$abnp
* Verify that the result list only shows 245$ab
* Apply patch
* Verify full title information is now shown
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 33030 implements a new helper subroutine to standardize processing of Template Toolkit syntax outside slips and notices. We should use this subroutine in C4::Serial::NewIssue
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Koha/Items.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries would like to have the text version of the serials
"published on" field auto-generated from a template. This template
should be definable at the subscription level.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Create or edit a new subscription
5) Edit the "Publication date template", create a template toolkit
template.
Keys available are the Koha::Subscription object as 'subscription'
and the following serial table columns as keys:
serialseq
serialseq_x
serialseq_y
serialseq_z
subscriptionid
biblionumber
status
planneddate
publisheddate
publisheddateext
notes
routingnotes
So your example template could be "[% subscription.subscriptionid %] [% biblionumber %]"
6) Generate the next serial
7) Note the next issue has a "Date published (text)" field based on the
template you set!
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Whenever we need to generate manually a new serial we go to page
'serials-edit.pl'. With this patch it is possible to generate a new
serial on page 'serials.pl'.
Test Plan:
-- Previously we need a serial which is in EXPECTED status & the Date
received should not be later than today --
1) On the intra. Make sure to have at least 1 subscription for a
bibliographic record & 1 vendor linked
2) Then Home > Serials > Claims > Claims for <your_vendor_name>
3) Tick the checkbox of the row where the status is EXPECTED then
4) Click 'Send notification'
5) Notice the status of the row : it is now CLAIMED
6) To verify: Home > Serials > Serial collection information for
<your_record_name>
7) Here the status is CLAIMED too but nothing happened around
8) Apply patch
9) Repeat from 2) to 6)
10) The status is still CLAIMED & the new serial with status EXPECTED is
freshly generated
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries would like to see the "Date published (text)" in the serials tab on the "Normal" record view ( aka catalogue/detail.pl ).
Test Plan:
1) View the serials tab on detail.pl for a subscription where the latest
serial has a "Date published (text)" field populated.
2) Apply this patch
3) Restart all the thigns!
4) Browse to detail.pl for that record
5) View the Subscriptions tab
6) Note the "Date published (text)" column exists now!
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
JD Amended patch:
-# FIXME Special case here
- print "Biblio not found\n,";
+ print "Biblio not found\n";
- my $biblio = Koha::Biblio->find($hostbiblionumber);
+ my $biblio = Koha::Biblios->find($hostbiblionumber);
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have a vendor setup
2. Go to serials and add a new serial w/ that vendor.
3. When creating a serial make this first issues sometime in the past.
4. Go to Claims, choose your vendor and load the table.
5. No published on column.
6. Apply patch
7. Try step 4 again and now you should see a published on column.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The default collection code set in the subscription will be applied if
item records are created when receiving the serial.
Test plan:
1. Apply 3 patches
2. Run updatedatabase.pl and restart services
3. Create a subscription:
- Tick the 'Create an item record when receiving this serial' radio
button
- Select values in the Location, Collection code and Item type dropdowns
- Save the subscription
4. Confirm the Location, and Collection code default values
you choose in #3 are displaying in the 'Information' tab of page that's
loaded
5. Receive the serial:
- Click 'Receive'
- Change the status dropdown from 'Expected' to 'Arrived'
- Confirm the 'Collection Code', 'Shelving location' and 'Koha item
type' dropdowns are pre-filled with the values you defined in #3
6. Run unit test t/db_dependent/Serials.t
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Samu Heiskanen <samu.heiskanen@hypernova.fi>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Make some new serial subscriptions and connect them to biblios that contain subtitles.
2. Do a serial search that will return your newly created subscription.
3. Notice the subtitle doesn't appear.
4. Apply patch and restart_all
5. Again try step 2.
6. Notice the subtitle appears alongside the title now.
7. Make sure it still sorts that column correctly.
Signed-off-by: shiyao <shiyao@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Make some new serial subscriptions and connect them to biblios that contain subtitles.
2. Do a serial search that will return your newly created subscription.
3. Click on one of those subscription to be taken to the subscription detail page.
4. Look at the main heading (h1) and the "Biblio:" line. Notice there is no subtitle in either place
5. Apply patch, restart_all, and reload the subscription detail page.
6. You should now see the subtitle on both the main heading (h1) and on the 'Biblio:' line.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We are using %B to display the month name but it seems that using the
CLDR pattern LLLL would be more appropriated.
https://metacpan.org/pod/DateTime#CLDR-Patterns
%B - The full month name.
LLLL - The wide stand-alone form for the month.
For instance in Catalan:
https://metacpan.org/pod/DateTime::Locale::ca
%B will display "de gener" when LLLL will be "gener"
Test plan:
Create a new numbering pattern:
Home > Serials > Numbering patterns > New numbering pattern
Numbering formula: {X}
Label: monthname
Add: 1
Every: 1
Set back to: 1
When more than: 999
Formatting: Name of month
And test it at the bottom of the form
Locale: Catalan
The number column should contain "gener", not "de gener"
Test other locales and confirm that the output is correct (no change
expected for English, French and Spanish for instance).
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Opac: On a record(Serials) details the location wasn't displayed on the "Normal view" and "Full history" tabs
Test plan:
1)Intranet: Make sure to have at least two different Serials/Subscriptions on the same record with the field 'location' filled in
2)Opac: Find your Serials/Subscriptions
3)Click 'More details' and notice the 3 tabs : Normal view, Brief history, Full history
4)Go to 'Normal view' and 'Full history' to notice that 'location' is missing
5)Apply patch, refresh your browser & repeat 4)
6)The location is now visible
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are using Koha::Logger when it makes sense to keep the info,
otherwise we simply remove it
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 28572: Replace missing occurrence in misc/admin/koha-preferences
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It seems that a librarian can edit the biblionumber for a given subscription, however, when receiving serials the biblionumber is pulled from the existing serials, so all new received issues are received on the old biblionumber.
This is problematic in light of bug 21901 - you can change the biblionumber, the serials still point to the old biblionumber - and deleting the biblio deletes the serials. Additionally, the update will delete serials where this was the case
Test plan:
1 - Create a new subscription
2 - Receive an issue
3 - Edit the subscription and change the biblionumber
4 - Receive another issue
5 - SELECT biblionumber FROM serial
=> the biblionumber link must have been updated
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should remove all SQL queries that contain 0000-00-00 and finally
assume we do not longer have such value in our DB (for date type)
We already dealt with such values in previous update DB entries.
The 2 added by this one haven't been replaced already.
The code will now assume that either a valid date exist, or NULL/undef.
Test plan:
QA review is needed and test of the different places where code is
modified.
Not sure about the change from reports/issues_avg_stats.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a .perlcriticrc (copied from qa-test-tools) and fixes
almost all perlcrictic violations according to this .perlcriticrc
The remaining violations are silenced out by appending a '## no critic'
to the offending lines. They can still be seen by using the --force
option of perlcritic
This patch also modify t/00-testcritic.t to check all Perl files using
the new .perlcriticrc.
I'm not sure if this test script is still useful as it is now equivalent
to `perlcritic --quiet .` and it looks like it is much slower
(approximatively 5 times slower on my machine)
Test plan:
1. Run `perlcritic --quiet .` from the root directory. It should output
nothing
2. Run `perlcritic --quiet --force .`. It should output 7 errors (6
StringyEval, 1 BarewordFileHandles)
3. Run `TEST_QA=1 prove t/00-testcritic.t`
4. Read the patch. Check that all changes make sense and do not
introduce undesired behaviour
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In order to improve performance in the serial modules and add DB constraints,
this patch is going to add missing foreign key on the following columns:
* serial.biblionumber
* serial.subscription
* subscriptionhistory.biblionumber
* subscriptionhistory.subscriptionid
* subscription.biblionumber
Once done, some code can be removed from the Del* subroutines, as the ON
CASCASE clause will make the RDBMS handles the deletions.
Test plan:
0/ It would be useful to test the update DB entry on a big and old
production DB, to make sure the constraints will be added correctly.
We could remove the entries before creating the constraints, but it can
be unecessary
1/ Make sure you can recreate a fresh install with the kohastructure.sql
from this patch
2/ Make sure you can upgrade from a master install
3/ Create a subscription, serial, etc. and delete the biblio
=> The subscription/serials should have been deleted from the DB
4/ Create a subscription, serial, etc. and delete the subscription
=> The serials should have been deleted from the DB
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Use serial with a numbering pattern with parentheses like "2018 (No. 1)".
Mark serial issue as arrived, check receivedlist on summary.
Edit issue again, check if not duplicated on receivedlist.
Mark issue as missing or not available, check missinglist.
Mark missing issue as not missing, check list again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To make this work I moved the _get_sub_length function from
subscription-add.pl to C4/Serials.pm so that the subscription-renew.pl
script could also call it to store the sublength for the appropriate
field of the subscriptions database table.
Test plan:
1. Create a subscription and notice that there is a dropdown box for sub
length containing the values: issues, weeks, months
2. Renew the subscription and notice that there are 3 input text boxes:
'number of num', 'number of weeks' and 'number of months'
3. Input a 'Number of weeks' value of 2
4. Query the subscription database table and notice that the value of 2
has been stored in the weeklength field for the subscription record you
just renewed
5. Apply the patch
6. Renew the subscription and notice that there is now a sublength
dropdown box containing issues, weeks and months
7. Set the month value to 3
8. Query the database and notice that 3 was stored in the monthlength
field for the subscription record
9. Create a new subscription and select the sub length values of issues
and 3
10. Query the database and notice that the numberlength field for the
subscription you just created is set to 3 showing that the sublength
dropbox is still working for creating a new subscription
Sponsored-By: Catalyst IT
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We certainly faced 3 similar bugs due to this syntax: bug 23006, bug
22941 and bug 17526.
To prevent other issues related to this syntax this patch suggests to
replace them all in one go.
Test plan:
Confirm that the 2 syntaxes are similar
Eyeball the patch and confirm that there is no typo!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We must use Koha::Subscription instead of raw SQL.
It will fix issue with default and integer values.
Test plan:
Edit a subscription and set number of issues = "f"
Save
=> Without this patch there is a SQL error in the log:
Incorrect integer value: 'f' for column 'numberlength'
=> With this patch the other changes are effective.
Note: We also could change the type attribute of the input to "number",
to have a client-side check
Also, the return value of ModSuggestion is never used, so we are safe
with that.
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
With bug 24217 pushed, lot of warnings appears during the tests are run.
Most of them are "Use of uninitialized value in "
Test plan:
Take a look at the output of run 1049
https://jenkins.koha-community.org/job/Koha_Master_D9/1049/consoleFull
Most of the warnings from this run will be removed by this patch
At least 2 are not fixed:
Use of uninitialized value in numeric eq (==) at /kohadevbox/koha/C4/Reserves.pm line 791.
t/db_dependent/Items_DelItemCheck.t => see 23463
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It also removes a warn statement.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Additionally I have added a library input field in case the librarian wants to set a library branch whilst renewing a subscription. With the use case being they may have ommitted to set the branchcode whilst creating the subscription.
Test plan:
1. Create a subscription (if one does not already exist)
2. Set the RenewSerialAddsSuggestion syspref to 'Add'
3. Renew the item making sure to write in a value into the note field
3. Visit the suggestions page and notice that the note is not displayed
for the newly created suggestion
4. Apply patch
5. Repeat step 3. Notice that there is now a new branchcode dropdown
box. Select one of your libraries and write in the value into the note
field
6. Visit suggestions and notice there is now a 'Suggestion note' column
in the table containing the note.
Also note that the suggestion has the correct branchcode associated with
it
Sponsored-By: Catalyst IT
Signed-off-by: Maksim Sen <maksim@inlibro.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
t/db_dependent/Biblio.t .. 2/12 DBD::mysql::st execute failed: Incorrect DATE value: '00-00-0000' [for Statement "
SELECT serial.serialid,
serial.serialseq,
serial.planneddate,
serial.publisheddate,
serial.publisheddatetext,
serial.status,
serial.notes as notes,
year(IF(serial.publisheddate="00-00-0000",serial.planneddate,serial.publisheddate)) as year,
biblio.title as bibliotitle,
subscription.branchcode AS branchcode,
subscription.subscriptionid AS subscriptionid
FROM serial
LEFT JOIN subscription ON
(serial.subscriptionid=subscription.subscriptionid)
LEFT JOIN aqbooksellers on subscription.aqbooksellerid=aqbooksellers.id
LEFT JOIN biblio on biblio.biblionumber=subscription.biblionumber
WHERE subscription.biblionumber = ?
ORDER BY year DESC,
IF(serial.publisheddate="00-00-0000",serial.planneddate,serial.publisheddate) DESC,
serial.subscriptionid
" with ParamValues: 0='446'] at /kohadevbox/koha/C4/Serials.pm line 482.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
DBD::mysql::st execute failed: Incorrect DATE value: '0000-00-00' [for Statement "SELECT serialid,serialseq, status, planneddate, publisheddate,
publisheddatetext, notes, routingnotes
FROM serial
WHERE subscriptionid = ?
AND status IN ( 2,4,41,42,43,44,5 )
ORDER BY IF(publisheddate<>'0000-00-00',publisheddate,planneddate) DESC
" with ParamValues: 0=8] at /kohadevbox/koha/C4/Serials.pm line 688.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 11492 intended to pass routinglists forward. It also passed forward serial notes.
This may or not me desired behvaiour, to avoid changing functionality twice I add a syspref
to control this behaviour.
To test:
1 - Have or create a subscription in the serials module
2 - Recieve an issue, making sure ot ad a note
3 - Go to receive again, note the note from the last serial is set for the expected issue
4 - Apply patch
5 - Update database, restart all the things
6 - Receive the issue leaving the note in place
7 - Note the next expected issue has the note
8 - Find the syspref PreserveSerialNotes
9 - Confirm it defaulted to Do
10 - Set it to 'Do not'
11 - Receive the expected serial leavign the note
12 - Note the newly generated expected serial has no note
13 - prove -v t/db_dependent/Serials.t
Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com>
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There are several notes and other fields in a subscription that
can be entered as multi-line input with breaks. We should display
them as they were entered with keeping the line breaks intact.
To test:
- Add a subscription
- Add comments including line breaks in internal and OPAC note
- Check the manual history checkbox
- Go to the subscription detail page, tab 'Planning'
- Use the 'Edit history' link to edit the history
- Enter content with line breaks in all the input fields where
it's possible
- Go to the OPAC detail page for your subscription record
- Go to tab 'Subscriptions' > More details > Brief history
- Verify the line breaks show there as <br>
- Apply patch
- Relaod page, verify all information displays correctly now
- Go back to the detail page, subscription tab - verify same there
- Go back to the subscription detail page in staff
- Check editing the history works as expected
- Verify information on all tabs displays correctly
- Receive a serial issue - verify note on top displays right
- Go to the serial collection page of the subscription - same there
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We have librarians that are regularly hitting the maximum number of
characters for the note fields in subscription history. They would like
to be able to store at least 1000 characters here. Converting the
varchar(150) to text should do it.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Add public and private notes to a subscription history entry
where each note is greater than 150 characters.
4) Save and view the notes, the notes should not be truncated.
Rescued-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
I have removed publisheddatetext as a param from my patch, but only in
the places where my patch added it. Any other instance already existed
before my patch.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch ensures the routing notes are carried over when generating
the next serial.
To test:
1) Create a routing list for a subscription
2) Add a borrower and a note to the routing list
3) Generate the next serial (serials-collection.pl)
4) Edit the routing list to see the notes
5) Note that the notes have disappeared
6) Apply patch
7) Edit the routing list, add a note
8) Generate the next serial
9) Edit the routing list and confirm the note is still there
10) Confirm you are still able to edit serials (serials-edit.pl) and
routing notes stay
Sponsored-by: Plant and Food Research Limited
Signed-off-by: Nazlı Çetin <nazli@devinim.com.tr>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch updates GetLatestSerials in Serials.pm to remove date
formatting. Formatting of dates should be done in the template using
$KohaDates.
To test, apply the patch and locate a bibliographic record in the staff
client which has a subscription with issues.
- On the bibliographic detail page for that record, view the
"Subscriptions" tab. Dates in the table of recent issues should be
formatted correctly.
- View the details for the subscription in the Serials module. Create
or edit a routing list for that serial. In the "Issue" dropdown the
issue dates should be formatted correctly.
- View the bibliographic detail page for the record in the OPAC. Open
the "Subscriptions" tab. In the table of recent issues publication
date and received date should be formatted correctly. The table
should sort correctly on these dates.
Note: Although opac-ISBDdetail.pl calls GetLatestSerials, as far as I
can tell there is no serial-related output to update. The code appears
to be unused.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Starting to write tests I realize that we are going to add too much
specific logic which is already handled in Koha::Object->store.
The easiest and safe way is to use it :)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
On the way, let fix this error
DBD::mysql::st execute failed: Mixing of GROUP columns
(MIN(),MAX(),COUNT(),...) with no GROUP columns is illegal if there is
no GROUP BY clause [for Statement "SELECT count(routingid) routingids
FROM subscription LEFT JOIN subscriptionroutinglist
Test plan:
Create a routing list, search for subscriptions
In the action list you should see "Edit routing list (1)" or "New
routing list"
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
With sql_strict_modes turned on, if you try to create a new subscription
you will get:
Incorrect integer value: '' for column '$INT_COLUMN' at row 1
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies C4/Serials.pm so that during the process of editing
a subscription a link to Mana can be created.
To test, apply the patch and go to Serials.
- Locate a subscription which was not created using Mana data but which
can be found in Mana.
- Edit the subscription, skipping to the second page.
- View the results returned by Mana and select one.
- Save the subscription.
- Upon being redirected to the subscription detail page you should see
a "Report mistake" button. This shows that the subscription has been
linked to Mana successfully.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Finally we do not want that, they should be fetch when needed
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
